mx6sabreauto: Add the mx6dual-lite variant

Tested by booting a mainline kernel via TFTP.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

diff --git a/board/freescale/mx6qsabreauto/mx6dl.cfg b/board/freescale/mx6qsabreauto/mx6dl.cfg
new file mode 100644 (file)
index 0000000..89078e5
--- /dev/null
+++ b/board/freescale/mx6qsabreauto/mx6dl.cfg
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM      sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *     Addr-type register length (1,2 or 4 bytes)
+ *     Address   absolute address of the register
+ *     value     value to be stored in the register
+ */
+DATA 4 0x020e0774 0x000C0000
+DATA 4 0x020e0754 0x00000000
+DATA 4 0x020e04ac 0x00000030
+DATA 4 0x020e04b0 0x00000030
+DATA 4 0x020e0464 0x00000030
+DATA 4 0x020e0490 0x00000030
+DATA 4 0x020e074c 0x00000030
+DATA 4 0x020e0494 0x00000030
+DATA 4 0x020e04a0 0x00000000
+DATA 4 0x020e04b4 0x00000030
+DATA 4 0x020e04b8 0x00000030
+DATA 4 0x020e076c 0x00000030
+DATA 4 0x020e0750 0x00020000
+DATA 4 0x020e04bc 0x00000028
+DATA 4 0x020e04c0 0x00000028
+DATA 4 0x020e04c4 0x00000028
+DATA 4 0x020e04c8 0x00000028
+DATA 4 0x020e04cc 0x00000028
+DATA 4 0x020e04d0 0x00000028
+DATA 4 0x020e04d4 0x00000028
+DATA 4 0x020e04d8 0x00000028
+DATA 4 0x020e0760 0x00020000
+DATA 4 0x020e0764 0x00000028
+DATA 4 0x020e0770 0x00000028
+DATA 4 0x020e0778 0x00000028
+DATA 4 0x020e077c 0x00000028
+DATA 4 0x020e0780 0x00000028
+DATA 4 0x020e0784 0x00000028
+DATA 4 0x020e078c 0x00000028
+DATA 4 0x020e0748 0x00000028
+DATA 4 0x020e0470 0x00000028
+DATA 4 0x020e0474 0x00000028
+DATA 4 0x020e0478 0x00000028
+DATA 4 0x020e047c 0x00000028
+DATA 4 0x020e0480 0x00000028
+DATA 4 0x020e0484 0x00000028
+DATA 4 0x020e0488 0x00000028
+DATA 4 0x020e048c 0x00000028
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b080c 0x001F001F
+DATA 4 0x021b0810 0x001F001F
+DATA 4 0x021b480c 0x001F001F
+DATA 4 0x021b4810 0x001F001F
+DATA 4 0x021b083c 0x42190217
+DATA 4 0x021b0840 0x017B017B
+DATA 4 0x021b483c 0x4176017B
+DATA 4 0x021b4840 0x015F016C
+DATA 4 0x021b0848 0x4C4C4D4C
+DATA 4 0x021b4848 0x4A4D4C48
+DATA 4 0x021b0850 0x3F3F3F40
+DATA 4 0x021b4850 0x3538382E
+DATA 4 0x021b081c 0x33333333
+DATA 4 0x021b0820 0x33333333
+DATA 4 0x021b0824 0x33333333
+DATA 4 0x021b0828 0x33333333
+DATA 4 0x021b481c 0x33333333
+DATA 4 0x021b4820 0x33333333
+DATA 4 0x021b4824 0x33333333
+DATA 4 0x021b4828 0x33333333
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b48b8 0x00000800
+DATA 4 0x021b0004 0x00020025
+DATA 4 0x021b0008 0x00333030
+DATA 4 0x021b000c 0x676B5313
+DATA 4 0x021b0010 0xB66E8B63
+DATA 4 0x021b0014 0x01FF00DB
+DATA 4 0x021b0018 0x00001740
+DATA 4 0x021b001c 0x00008000
+DATA 4 0x021b002c 0x000026d2
+DATA 4 0x021b0030 0x006B1023
+DATA 4 0x021b0040 0x00000047
+DATA 4 0x021b0000 0x841A0000
+DATA 4 0x021b001c 0x04008032
+DATA 4 0x021b001c 0x00008033
+DATA 4 0x021b001c 0x00048031
+DATA 4 0x021b001c 0x05208030
+DATA 4 0x021b001c 0x04008040
+DATA 4 0x021b0020 0x00005800
+DATA 4 0x021b0818 0x00011117
+DATA 4 0x021b4818 0x00011117
+DATA 4 0x021b0004 0x00025565
+DATA 4 0x021b0404 0x00011006
+DATA 4 0x021b001c 0x00000000
+
+/* set the default clock gate to save power */
+DATA 4 0x020c4068 0x00C03F3F
+DATA 4 0x020c406c 0x0030FC03
+DATA 4 0x020c4070 0x0FFFC000
+DATA 4 0x020c4074 0x3FF00000
+DATA 4 0x020c4078 0xFFFFF300
+DATA 4 0x020c407c 0x0F0000C3
+DATA 4 0x020c4080 0x00000FFF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4 0x020e0010 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4 0x020e0018 0x007F007F
+DATA 4 0x020e001c 0x007F007F

diff --git a/boards.cfg b/boards.cfg
index 8b1177c36e395a24b90485867a5bc493b90e4d0d..5cf0583bf24d765bd529cc7458299a57a8dca21f 100644 (file)
--- a/boards.cfg
+++ b/boards.cfg
@@ -324,6 +324,7 @@ Active  arm         armv7          mx6         embest          mx6boards
 Active  arm         armv7          mx6         embest          mx6boards           riotboard                             embestmx6boards:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024,ENV_IS_IN_MMC                              Eric Bénard <eric@eukrea.com>
 Active  arm         armv7          mx6         freescale       mx6qarm2            mx6qarm2                              mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg                                                                         Jason Liu <r64343@freescale.com>
 Active  arm         armv7          mx6         freescale       mx6qsabreauto       mx6qsabreauto                         mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q                                                          Fabio Estevam <fabio.estevam@freescale.com>
+Active  arm         armv7          mx6         freescale       mx6qsabreauto       mx6dlsabreauto                        mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL            Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         armv7          mx6         freescale       mx6sabresd          mx6dlsabresd                          mx6sabresd:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL                                                             Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         armv7          mx6         freescale       mx6sabresd          mx6qsabresd                           mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q                                                           Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         armv7          mx6         freescale       mx6slevk            mx6slevk                              mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL                                                                   Fabio Estevam <fabio.estevam@freescale.com>

diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index bd0144f5cb49ae9a060a64230c93cad831e95618..d1639c4c761fc9b1512bbce23ae2032f7cd17f9b 100644 (file)
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -12,7 +12,11 @@
 #define CONFIG_MACH_TYPE       3529
 #define CONFIG_MXC_UART_BASE   UART4_BASE
 #define CONFIG_CONSOLE_DEV             "ttymxc3"
+#if defined CONFIG_MX6Q
 #define CONFIG_DEFAULT_FDT_FILE        "imx6q-sabreauto.dtb"
+#elif defined CONFIG_MX6DL
+#define CONFIG_DEFAULT_FDT_FILE        "imx6dl-sabreauto.dtb"
+#endif
 #define CONFIG_MMCROOT                 "/dev/mmcblk0p2"
 #define PHYS_SDRAM_SIZE                (2u * 1024 * 1024 * 1024)