--- /dev/null
+/*
+ * Driver for Marvell NETA network card for Armada XP and Armada 370 SoCs.
+ *
+ * U-Boot version:
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * Based on the Linux version which is:
+ * Copyright (C) 2012 Marvell
+ *
+ * Rami Rosen <rosenr@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <net.h>
+#include <netdev.h>
+#include <config.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <phy.h>
+#include <miiphy.h>
+#include <watchdog.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <linux/compat.h>
+#include <linux/mbus.h>
+
+#if !defined(CONFIG_PHYLIB)
+# error Marvell mvneta requires PHYLIB
+#endif
+
+/* Some linux -> U-Boot compatibility stuff */
+#define netdev_err(dev, fmt, args...) \
+ printf(fmt, ##args)
+#define netdev_warn(dev, fmt, args...) \
+ printf(fmt, ##args)
+#define netdev_info(dev, fmt, args...) \
+ printf(fmt, ##args)
+
+#define CONFIG_NR_CPUS 1
+#define BIT(nr) (1UL << (nr))
+#define ETH_HLEN 14 /* Total octets in header */
+
+/* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */
+#define WRAP (2 + ETH_HLEN + 4 + 32)
+#define MTU 1500
+#define RX_BUFFER_SIZE (ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN))
+
+#define MVNETA_SMI_TIMEOUT 10000
+
+/* Registers */
+#define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))
+#define MVNETA_RXQ_HW_BUF_ALLOC BIT(1)
+#define MVNETA_RXQ_PKT_OFFSET_ALL_MASK (0xf << 8)
+#define MVNETA_RXQ_PKT_OFFSET_MASK(offs) ((offs) << 8)
+#define MVNETA_RXQ_THRESHOLD_REG(q) (0x14c0 + ((q) << 2))
+#define MVNETA_RXQ_NON_OCCUPIED(v) ((v) << 16)
+#define MVNETA_RXQ_BASE_ADDR_REG(q) (0x1480 + ((q) << 2))
+#define MVNETA_RXQ_SIZE_REG(q) (0x14a0 + ((q) << 2))
+#define MVNETA_RXQ_BUF_SIZE_SHIFT 19
+#define MVNETA_RXQ_BUF_SIZE_MASK (0x1fff << 19)
+#define MVNETA_RXQ_STATUS_REG(q) (0x14e0 + ((q) << 2))
+#define MVNETA_RXQ_OCCUPIED_ALL_MASK 0x3fff
+#define MVNETA_RXQ_STATUS_UPDATE_REG(q) (0x1500 + ((q) << 2))
+#define MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT 16
+#define MVNETA_RXQ_ADD_NON_OCCUPIED_MAX 255
+#define MVNETA_PORT_RX_RESET 0x1cc0
+#define MVNETA_PORT_RX_DMA_RESET BIT(0)
+#define MVNETA_PHY_ADDR 0x2000
+#define MVNETA_PHY_ADDR_MASK 0x1f
+#define MVNETA_SMI 0x2004
+#define MVNETA_PHY_REG_MASK 0x1f
+/* SMI register fields */
+#define MVNETA_SMI_DATA_OFFS 0 /* Data */
+#define MVNETA_SMI_DATA_MASK (0xffff << MVNETA_SMI_DATA_OFFS)
+#define MVNETA_SMI_DEV_ADDR_OFFS 16 /* PHY device address */
+#define MVNETA_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr*/
+#define MVNETA_SMI_OPCODE_OFFS 26 /* Write/Read opcode */
+#define MVNETA_SMI_OPCODE_READ (1 << MVNETA_SMI_OPCODE_OFFS)
+#define MVNETA_SMI_READ_VALID (1 << 27) /* Read Valid */
+#define MVNETA_SMI_BUSY (1 << 28) /* Busy */
+#define MVNETA_MBUS_RETRY 0x2010
+#define MVNETA_UNIT_INTR_CAUSE 0x2080
+#define MVNETA_UNIT_CONTROL 0x20B0
+#define MVNETA_PHY_POLLING_ENABLE BIT(1)
+#define MVNETA_WIN_BASE(w) (0x2200 + ((w) << 3))
+#define MVNETA_WIN_SIZE(w) (0x2204 + ((w) << 3))
+#define MVNETA_WIN_REMAP(w) (0x2280 + ((w) << 2))
+#define MVNETA_BASE_ADDR_ENABLE 0x2290
+#define MVNETA_PORT_CONFIG 0x2400
+#define MVNETA_UNI_PROMISC_MODE BIT(0)
+#define MVNETA_DEF_RXQ(q) ((q) << 1)
+#define MVNETA_DEF_RXQ_ARP(q) ((q) << 4)
+#define MVNETA_TX_UNSET_ERR_SUM BIT(12)
+#define MVNETA_DEF_RXQ_TCP(q) ((q) << 16)
+#define MVNETA_DEF_RXQ_UDP(q) ((q) << 19)
+#define MVNETA_DEF_RXQ_BPDU(q) ((q) << 22)
+#define MVNETA_RX_CSUM_WITH_PSEUDO_HDR BIT(25)
+#define MVNETA_PORT_CONFIG_DEFL_VALUE(q) (MVNETA_DEF_RXQ(q) | \
+ MVNETA_DEF_RXQ_ARP(q) | \
+ MVNETA_DEF_RXQ_TCP(q) | \
+ MVNETA_DEF_RXQ_UDP(q) | \
+ MVNETA_DEF_RXQ_BPDU(q) | \
+ MVNETA_TX_UNSET_ERR_SUM | \
+ MVNETA_RX_CSUM_WITH_PSEUDO_HDR)
+#define MVNETA_PORT_CONFIG_EXTEND 0x2404
+#define MVNETA_MAC_ADDR_LOW 0x2414
+#define MVNETA_MAC_ADDR_HIGH 0x2418
+#define MVNETA_SDMA_CONFIG 0x241c
+#define MVNETA_SDMA_BRST_SIZE_16 4
+#define MVNETA_RX_BRST_SZ_MASK(burst) ((burst) << 1)
+#define MVNETA_RX_NO_DATA_SWAP BIT(4)
+#define MVNETA_TX_NO_DATA_SWAP BIT(5)
+#define MVNETA_DESC_SWAP BIT(6)
+#define MVNETA_TX_BRST_SZ_MASK(burst) ((burst) << 22)
+#define MVNETA_PORT_STATUS 0x2444
+#define MVNETA_TX_IN_PRGRS BIT(1)
+#define MVNETA_TX_FIFO_EMPTY BIT(8)
+#define MVNETA_RX_MIN_FRAME_SIZE 0x247c
+#define MVNETA_SERDES_CFG 0x24A0
+#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
+#define MVNETA_QSGMII_SERDES_PROTO 0x0667
+#define MVNETA_TYPE_PRIO 0x24bc
+#define MVNETA_FORCE_UNI BIT(21)
+#define MVNETA_TXQ_CMD_1 0x24e4
+#define MVNETA_TXQ_CMD 0x2448
+#define MVNETA_TXQ_DISABLE_SHIFT 8
+#define MVNETA_TXQ_ENABLE_MASK 0x000000ff
+#define MVNETA_ACC_MODE 0x2500
+#define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2))
+#define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff
+#define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00
+#define MVNETA_RXQ_TIME_COAL_REG(q) (0x2580 + ((q) << 2))
+
+/* Exception Interrupt Port/Queue Cause register */
+
+#define MVNETA_INTR_NEW_CAUSE 0x25a0
+#define MVNETA_INTR_NEW_MASK 0x25a4
+
+/* bits 0..7 = TXQ SENT, one bit per queue.
+ * bits 8..15 = RXQ OCCUP, one bit per queue.
+ * bits 16..23 = RXQ FREE, one bit per queue.
+ * bit 29 = OLD_REG_SUM, see old reg ?
+ * bit 30 = TX_ERR_SUM, one bit for 4 ports
+ * bit 31 = MISC_SUM, one bit for 4 ports
+ */
+#define MVNETA_TX_INTR_MASK(nr_txqs) (((1 << nr_txqs) - 1) << 0)
+#define MVNETA_TX_INTR_MASK_ALL (0xff << 0)
+#define MVNETA_RX_INTR_MASK(nr_rxqs) (((1 << nr_rxqs) - 1) << 8)
+#define MVNETA_RX_INTR_MASK_ALL (0xff << 8)
+
+#define MVNETA_INTR_OLD_CAUSE 0x25a8
+#define MVNETA_INTR_OLD_MASK 0x25ac
+
+/* Data Path Port/Queue Cause Register */
+#define MVNETA_INTR_MISC_CAUSE 0x25b0
+#define MVNETA_INTR_MISC_MASK 0x25b4
+#define MVNETA_INTR_ENABLE 0x25b8
+
+#define MVNETA_RXQ_CMD 0x2680
+#define MVNETA_RXQ_DISABLE_SHIFT 8
+#define MVNETA_RXQ_ENABLE_MASK 0x000000ff
+#define MVETH_TXQ_TOKEN_COUNT_REG(q) (0x2700 + ((q) << 4))
+#define MVETH_TXQ_TOKEN_CFG_REG(q) (0x2704 + ((q) << 4))
+#define MVNETA_GMAC_CTRL_0 0x2c00
+#define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2
+#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
+#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
+#define MVNETA_GMAC_CTRL_2 0x2c08
+#define MVNETA_GMAC2_PCS_ENABLE BIT(3)
+#define MVNETA_GMAC2_PORT_RGMII BIT(4)
+#define MVNETA_GMAC2_PORT_RESET BIT(6)
+#define MVNETA_GMAC_STATUS 0x2c10
+#define MVNETA_GMAC_LINK_UP BIT(0)
+#define MVNETA_GMAC_SPEED_1000 BIT(1)
+#define MVNETA_GMAC_SPEED_100 BIT(2)
+#define MVNETA_GMAC_FULL_DUPLEX BIT(3)
+#define MVNETA_GMAC_RX_FLOW_CTRL_ENABLE BIT(4)
+#define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5)
+#define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6)
+#define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7)
+#define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c
+#define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
+#define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
+#define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5)
+#define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6)
+#define MVNETA_GMAC_AN_SPEED_EN BIT(7)
+#define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
+#define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
+#define MVNETA_MIB_COUNTERS_BASE 0x3080
+#define MVNETA_MIB_LATE_COLLISION 0x7c
+#define MVNETA_DA_FILT_SPEC_MCAST 0x3400
+#define MVNETA_DA_FILT_OTH_MCAST 0x3500
+#define MVNETA_DA_FILT_UCAST_BASE 0x3600
+#define MVNETA_TXQ_BASE_ADDR_REG(q) (0x3c00 + ((q) << 2))
+#define MVNETA_TXQ_SIZE_REG(q) (0x3c20 + ((q) << 2))
+#define MVNETA_TXQ_SENT_THRESH_ALL_MASK 0x3fff0000
+#define MVNETA_TXQ_SENT_THRESH_MASK(coal) ((coal) << 16)
+#define MVNETA_TXQ_UPDATE_REG(q) (0x3c60 + ((q) << 2))
+#define MVNETA_TXQ_DEC_SENT_SHIFT 16
+#define MVNETA_TXQ_STATUS_REG(q) (0x3c40 + ((q) << 2))
+#define MVNETA_TXQ_SENT_DESC_SHIFT 16
+#define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000
+#define MVNETA_PORT_TX_RESET 0x3cf0
+#define MVNETA_PORT_TX_DMA_RESET BIT(0)
+#define MVNETA_TX_MTU 0x3e0c
+#define MVNETA_TX_TOKEN_SIZE 0x3e14
+#define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff
+#define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
+#define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
+
+/* Descriptor ring Macros */
+#define MVNETA_QUEUE_NEXT_DESC(q, index) \
+ (((index) < (q)->last_desc) ? ((index) + 1) : 0)
+
+/* Various constants */
+
+/* Coalescing */
+#define MVNETA_TXDONE_COAL_PKTS 16
+#define MVNETA_RX_COAL_PKTS 32
+#define MVNETA_RX_COAL_USEC 100
+
+/* The two bytes Marvell header. Either contains a special value used
+ * by Marvell switches when a specific hardware mode is enabled (not
+ * supported by this driver) or is filled automatically by zeroes on
+ * the RX side. Those two bytes being at the front of the Ethernet
+ * header, they allow to have the IP header aligned on a 4 bytes
+ * boundary automatically: the hardware skips those two bytes on its
+ * own.
+ */
+#define MVNETA_MH_SIZE 2
+
+#define MVNETA_VLAN_TAG_LEN 4
+
+#define MVNETA_CPU_D_CACHE_LINE_SIZE 32
+#define MVNETA_TX_CSUM_MAX_SIZE 9800
+#define MVNETA_ACC_MODE_EXT 1
+
+/* Timeout constants */
+#define MVNETA_TX_DISABLE_TIMEOUT_MSEC 1000
+#define MVNETA_RX_DISABLE_TIMEOUT_MSEC 1000
+#define MVNETA_TX_FIFO_EMPTY_TIMEOUT 10000
+
+#define MVNETA_TX_MTU_MAX 0x3ffff
+
+/* Max number of Rx descriptors */
+#define MVNETA_MAX_RXD 16
+
+/* Max number of Tx descriptors */
+#define MVNETA_MAX_TXD 16
+
+/* descriptor aligned size */
+#define MVNETA_DESC_ALIGNED_SIZE 32
+
+struct mvneta_port {
+ void __iomem *base;
+ struct mvneta_rx_queue *rxqs;
+ struct mvneta_tx_queue *txqs;
+
+ u8 mcast_count[256];
+ u16 tx_ring_size;
+ u16 rx_ring_size;
+
+ phy_interface_t phy_interface;
+ unsigned int link;
+ unsigned int duplex;
+ unsigned int speed;
+
+ int init;
+ int phyaddr;
+ struct phy_device *phydev;
+ struct mii_dev *bus;
+};
+
+/* The mvneta_tx_desc and mvneta_rx_desc structures describe the
+ * layout of the transmit and reception DMA descriptors, and their
+ * layout is therefore defined by the hardware design
+ */
+
+#define MVNETA_TX_L3_OFF_SHIFT 0
+#define MVNETA_TX_IP_HLEN_SHIFT 8
+#define MVNETA_TX_L4_UDP BIT(16)
+#define MVNETA_TX_L3_IP6 BIT(17)
+#define MVNETA_TXD_IP_CSUM BIT(18)
+#define MVNETA_TXD_Z_PAD BIT(19)
+#define MVNETA_TXD_L_DESC BIT(20)
+#define MVNETA_TXD_F_DESC BIT(21)
+#define MVNETA_TXD_FLZ_DESC (MVNETA_TXD_Z_PAD | \
+ MVNETA_TXD_L_DESC | \
+ MVNETA_TXD_F_DESC)
+#define MVNETA_TX_L4_CSUM_FULL BIT(30)
+#define MVNETA_TX_L4_CSUM_NOT BIT(31)
+
+#define MVNETA_RXD_ERR_CRC 0x0
+#define MVNETA_RXD_ERR_SUMMARY BIT(16)
+#define MVNETA_RXD_ERR_OVERRUN BIT(17)
+#define MVNETA_RXD_ERR_LEN BIT(18)
+#define MVNETA_RXD_ERR_RESOURCE (BIT(17) | BIT(18))
+#define MVNETA_RXD_ERR_CODE_MASK (BIT(17) | BIT(18))
+#define MVNETA_RXD_L3_IP4 BIT(25)
+#define MVNETA_RXD_FIRST_LAST_DESC (BIT(26) | BIT(27))
+#define MVNETA_RXD_L4_CSUM_OK BIT(30)
+
+struct mvneta_tx_desc {
+ u32 command; /* Options used by HW for packet transmitting.*/
+ u16 reserverd1; /* csum_l4 (for future use) */
+ u16 data_size; /* Data size of transmitted packet in bytes */
+ u32 buf_phys_addr; /* Physical addr of transmitted buffer */
+ u32 reserved2; /* hw_cmd - (for future use, PMT) */
+ u32 reserved3[4]; /* Reserved - (for future use) */
+};
+
+struct mvneta_rx_desc {
+ u32 status; /* Info about received packet */
+ u16 reserved1; /* pnc_info - (for future use, PnC) */
+ u16 data_size; /* Size of received packet in bytes */
+
+ u32 buf_phys_addr; /* Physical address of the buffer */
+ u32 reserved2; /* pnc_flow_id (for future use, PnC) */
+
+ u32 buf_cookie; /* cookie for access to RX buffer in rx path */
+ u16 reserved3; /* prefetch_cmd, for future use */
+ u16 reserved4; /* csum_l4 - (for future use, PnC) */
+
+ u32 reserved5; /* pnc_extra PnC (for future use, PnC) */
+ u32 reserved6; /* hw_cmd (for future use, PnC and HWF) */
+};
+
+struct mvneta_tx_queue {
+ /* Number of this TX queue, in the range 0-7 */
+ u8 id;
+
+ /* Number of TX DMA descriptors in the descriptor ring */
+ int size;
+
+ /* Index of last TX DMA descriptor that was inserted */
+ int txq_put_index;
+
+ /* Index of the TX DMA descriptor to be cleaned up */
+ int txq_get_index;
+
+ /* Virtual address of the TX DMA descriptors array */
+ struct mvneta_tx_desc *descs;
+
+ /* DMA address of the TX DMA descriptors array */
+ dma_addr_t descs_phys;
+
+ /* Index of the last TX DMA descriptor */
+ int last_desc;
+
+ /* Index of the next TX DMA descriptor to process */
+ int next_desc_to_proc;
+};
+
+struct mvneta_rx_queue {
+ /* rx queue number, in the range 0-7 */
+ u8 id;
+
+ /* num of rx descriptors in the rx descriptor ring */
+ int size;
+
+ /* Virtual address of the RX DMA descriptors array */
+ struct mvneta_rx_desc *descs;
+
+ /* DMA address of the RX DMA descriptors array */
+ dma_addr_t descs_phys;
+
+ /* Index of the last RX DMA descriptor */
+ int last_desc;
+
+ /* Index of the next RX DMA descriptor to process */
+ int next_desc_to_proc;
+};
+
+/* U-Boot doesn't use the queues, so set the number to 1 */
+static int rxq_number = 1;
+static int txq_number = 1;
+static int rxq_def;
+
+struct buffer_location {
+ struct mvneta_tx_desc *tx_descs;
+ struct mvneta_rx_desc *rx_descs;
+ u32 rx_buffers;
+};
+
+/*
+ * All 4 interfaces use the same global buffer, since only one interface
+ * can be enabled at once
+ */
+static struct buffer_location buffer_loc;
+
+/*
+ * Page table entries are set to 1MB, or multiples of 1MB
+ * (not < 1MB). driver uses less bd's so use 1MB bdspace.
+ */
+#define BD_SPACE (1 << 20)
+
+/* Utility/helper methods */
+
+/* Write helper method */
+static void mvreg_write(struct mvneta_port *pp, u32 offset, u32 data)
+{
+ writel(data, pp->base + offset);
+}
+
+/* Read helper method */
+static u32 mvreg_read(struct mvneta_port *pp, u32 offset)
+{
+ return readl(pp->base + offset);
+}
+
+/* Clear all MIB counters */
+static void mvneta_mib_counters_clear(struct mvneta_port *pp)
+{
+ int i;
+
+ /* Perform dummy reads from MIB counters */
+ for (i = 0; i < MVNETA_MIB_LATE_COLLISION; i += 4)
+ mvreg_read(pp, (MVNETA_MIB_COUNTERS_BASE + i));
+}
+
+/* Rx descriptors helper methods */
+
+/* Checks whether the RX descriptor having this status is both the first
+ * and the last descriptor for the RX packet. Each RX packet is currently
+ * received through a single RX descriptor, so not having each RX
+ * descriptor with its first and last bits set is an error
+ */
+static int mvneta_rxq_desc_is_first_last(u32 status)
+{
+ return (status & MVNETA_RXD_FIRST_LAST_DESC) ==
+ MVNETA_RXD_FIRST_LAST_DESC;
+}
+
+/* Add number of descriptors ready to receive new packets */
+static void mvneta_rxq_non_occup_desc_add(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq,
+ int ndescs)
+{
+ /* Only MVNETA_RXQ_ADD_NON_OCCUPIED_MAX (255) descriptors can
+ * be added at once
+ */
+ while (ndescs > MVNETA_RXQ_ADD_NON_OCCUPIED_MAX) {
+ mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
+ (MVNETA_RXQ_ADD_NON_OCCUPIED_MAX <<
+ MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
+ ndescs -= MVNETA_RXQ_ADD_NON_OCCUPIED_MAX;
+ }
+
+ mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
+ (ndescs << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
+}
+
+/* Get number of RX descriptors occupied by received packets */
+static int mvneta_rxq_busy_desc_num_get(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq)
+{
+ u32 val;
+
+ val = mvreg_read(pp, MVNETA_RXQ_STATUS_REG(rxq->id));
+ return val & MVNETA_RXQ_OCCUPIED_ALL_MASK;
+}
+
+/* Update num of rx desc called upon return from rx path or
+ * from mvneta_rxq_drop_pkts().
+ */
+static void mvneta_rxq_desc_num_update(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq,
+ int rx_done, int rx_filled)
+{
+ u32 val;
+
+ if ((rx_done <= 0xff) && (rx_filled <= 0xff)) {
+ val = rx_done |
+ (rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT);
+ mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
+ return;
+ }
+
+ /* Only 255 descriptors can be added at once */
+ while ((rx_done > 0) || (rx_filled > 0)) {
+ if (rx_done <= 0xff) {
+ val = rx_done;
+ rx_done = 0;
+ } else {
+ val = 0xff;
+ rx_done -= 0xff;
+ }
+ if (rx_filled <= 0xff) {
+ val |= rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
+ rx_filled = 0;
+ } else {
+ val |= 0xff << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
+ rx_filled -= 0xff;
+ }
+ mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
+ }
+}
+
+/* Get pointer to next RX descriptor to be processed by SW */
+static struct mvneta_rx_desc *
+mvneta_rxq_next_desc_get(struct mvneta_rx_queue *rxq)
+{
+ int rx_desc = rxq->next_desc_to_proc;
+
+ rxq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(rxq, rx_desc);
+ return rxq->descs + rx_desc;
+}
+
+/* Tx descriptors helper methods */
+
+/* Update HW with number of TX descriptors to be sent */
+static void mvneta_txq_pend_desc_add(struct mvneta_port *pp,
+ struct mvneta_tx_queue *txq,
+ int pend_desc)
+{
+ u32 val;
+
+ /* Only 255 descriptors can be added at once ; Assume caller
+ * process TX desriptors in quanta less than 256
+ */
+ val = pend_desc;
+ mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
+}
+
+/* Get pointer to next TX descriptor to be processed (send) by HW */
+static struct mvneta_tx_desc *
+mvneta_txq_next_desc_get(struct mvneta_tx_queue *txq)
+{
+ int tx_desc = txq->next_desc_to_proc;
+
+ txq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(txq, tx_desc);
+ return txq->descs + tx_desc;
+}
+
+/* Set rxq buf size */
+static void mvneta_rxq_buf_size_set(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq,
+ int buf_size)
+{
+ u32 val;
+
+ val = mvreg_read(pp, MVNETA_RXQ_SIZE_REG(rxq->id));
+
+ val &= ~MVNETA_RXQ_BUF_SIZE_MASK;
+ val |= ((buf_size >> 3) << MVNETA_RXQ_BUF_SIZE_SHIFT);
+
+ mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), val);
+}
+
+/* Start the Ethernet port RX and TX activity */
+static void mvneta_port_up(struct mvneta_port *pp)
+{
+ int queue;
+ u32 q_map;
+
+ /* Enable all initialized TXs. */
+ mvneta_mib_counters_clear(pp);
+ q_map = 0;
+ for (queue = 0; queue < txq_number; queue++) {
+ struct mvneta_tx_queue *txq = &pp->txqs[queue];
+ if (txq->descs != NULL)
+ q_map |= (1 << queue);
+ }
+ mvreg_write(pp, MVNETA_TXQ_CMD, q_map);
+
+ /* Enable all initialized RXQs. */
+ q_map = 0;
+ for (queue = 0; queue < rxq_number; queue++) {
+ struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
+ if (rxq->descs != NULL)
+ q_map |= (1 << queue);
+ }
+ mvreg_write(pp, MVNETA_RXQ_CMD, q_map);
+}
+
+/* Stop the Ethernet port activity */
+static void mvneta_port_down(struct mvneta_port *pp)
+{
+ u32 val;
+ int count;
+
+ /* Stop Rx port activity. Check port Rx activity. */
+ val = mvreg_read(pp, MVNETA_RXQ_CMD) & MVNETA_RXQ_ENABLE_MASK;
+
+ /* Issue stop command for active channels only */
+ if (val != 0)
+ mvreg_write(pp, MVNETA_RXQ_CMD,
+ val << MVNETA_RXQ_DISABLE_SHIFT);
+
+ /* Wait for all Rx activity to terminate. */
+ count = 0;
+ do {
+ if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) {
+ netdev_warn(pp->dev,
+ "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n",
+ val);
+ break;
+ }
+ mdelay(1);
+
+ val = mvreg_read(pp, MVNETA_RXQ_CMD);
+ } while (val & 0xff);
+
+ /* Stop Tx port activity. Check port Tx activity. Issue stop
+ * command for active channels only
+ */
+ val = (mvreg_read(pp, MVNETA_TXQ_CMD)) & MVNETA_TXQ_ENABLE_MASK;
+
+ if (val != 0)
+ mvreg_write(pp, MVNETA_TXQ_CMD,
+ (val << MVNETA_TXQ_DISABLE_SHIFT));
+
+ /* Wait for all Tx activity to terminate. */
+ count = 0;
+ do {
+ if (count++ >= MVNETA_TX_DISABLE_TIMEOUT_MSEC) {
+ netdev_warn(pp->dev,
+ "TIMEOUT for TX stopped status=0x%08x\n",
+ val);
+ break;
+ }
+ mdelay(1);
+
+ /* Check TX Command reg that all Txqs are stopped */
+ val = mvreg_read(pp, MVNETA_TXQ_CMD);
+
+ } while (val & 0xff);
+
+ /* Double check to verify that TX FIFO is empty */
+ count = 0;
+ do {
+ if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) {
+ netdev_warn(pp->dev,
+ "TX FIFO empty timeout status=0x08%x\n",
+ val);
+ break;
+ }
+ mdelay(1);
+
+ val = mvreg_read(pp, MVNETA_PORT_STATUS);
+ } while (!(val & MVNETA_TX_FIFO_EMPTY) &&
+ (val & MVNETA_TX_IN_PRGRS));
+
+ udelay(200);
+}
+
+/* Enable the port by setting the port enable bit of the MAC control register */
+static void mvneta_port_enable(struct mvneta_port *pp)
+{
+ u32 val;
+
+ /* Enable port */
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
+ val |= MVNETA_GMAC0_PORT_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
+}
+
+/* Disable the port and wait for about 200 usec before retuning */
+static void mvneta_port_disable(struct mvneta_port *pp)
+{
+ u32 val;
+
+ /* Reset the Enable bit in the Serial Control Register */
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
+ val &= ~MVNETA_GMAC0_PORT_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
+
+ udelay(200);
+}
+
+/* Multicast tables methods */
+
+/* Set all entries in Unicast MAC Table; queue==-1 means reject all */
+static void mvneta_set_ucast_table(struct mvneta_port *pp, int queue)
+{
+ int offset;
+ u32 val;
+
+ if (queue == -1) {
+ val = 0;
+ } else {
+ val = 0x1 | (queue << 1);
+ val |= (val << 24) | (val << 16) | (val << 8);
+ }
+
+ for (offset = 0; offset <= 0xc; offset += 4)
+ mvreg_write(pp, MVNETA_DA_FILT_UCAST_BASE + offset, val);
+}
+
+/* Set all entries in Special Multicast MAC Table; queue==-1 means reject all */
+static void mvneta_set_special_mcast_table(struct mvneta_port *pp, int queue)
+{
+ int offset;
+ u32 val;
+
+ if (queue == -1) {
+ val = 0;
+ } else {
+ val = 0x1 | (queue << 1);
+ val |= (val << 24) | (val << 16) | (val << 8);
+ }
+
+ for (offset = 0; offset <= 0xfc; offset += 4)
+ mvreg_write(pp, MVNETA_DA_FILT_SPEC_MCAST + offset, val);
+}
+
+/* Set all entries in Other Multicast MAC Table. queue==-1 means reject all */
+static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue)
+{
+ int offset;
+ u32 val;
+
+ if (queue == -1) {
+ memset(pp->mcast_count, 0, sizeof(pp->mcast_count));
+ val = 0;
+ } else {
+ memset(pp->mcast_count, 1, sizeof(pp->mcast_count));
+ val = 0x1 | (queue << 1);
+ val |= (val << 24) | (val << 16) | (val << 8);
+ }
+
+ for (offset = 0; offset <= 0xfc; offset += 4)
+ mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
+}
+
+/* This method sets defaults to the NETA port:
+ * Clears interrupt Cause and Mask registers.
+ * Clears all MAC tables.
+ * Sets defaults to all registers.
+ * Resets RX and TX descriptor rings.
+ * Resets PHY.
+ * This method can be called after mvneta_port_down() to return the port
+ * settings to defaults.
+ */
+static void mvneta_defaults_set(struct mvneta_port *pp)
+{
+ int cpu;
+ int queue;
+ u32 val;
+
+ /* Clear all Cause registers */
+ mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
+ mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
+ mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
+
+ /* Mask all interrupts */
+ mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
+ mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
+ mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
+ mvreg_write(pp, MVNETA_INTR_ENABLE, 0);
+
+ /* Enable MBUS Retry bit16 */
+ mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20);
+
+ /* Set CPU queue access map - all CPUs have access to all RX
+ * queues and to all TX queues
+ */
+ for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++)
+ mvreg_write(pp, MVNETA_CPU_MAP(cpu),
+ (MVNETA_CPU_RXQ_ACCESS_ALL_MASK |
+ MVNETA_CPU_TXQ_ACCESS_ALL_MASK));
+
+ /* Reset RX and TX DMAs */
+ mvreg_write(pp, MVNETA_PORT_RX_RESET, MVNETA_PORT_RX_DMA_RESET);
+ mvreg_write(pp, MVNETA_PORT_TX_RESET, MVNETA_PORT_TX_DMA_RESET);
+
+ /* Disable Legacy WRR, Disable EJP, Release from reset */
+ mvreg_write(pp, MVNETA_TXQ_CMD_1, 0);
+ for (queue = 0; queue < txq_number; queue++) {
+ mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(queue), 0);
+ mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(queue), 0);
+ }
+
+ mvreg_write(pp, MVNETA_PORT_TX_RESET, 0);
+ mvreg_write(pp, MVNETA_PORT_RX_RESET, 0);
+
+ /* Set Port Acceleration Mode */
+ val = MVNETA_ACC_MODE_EXT;
+ mvreg_write(pp, MVNETA_ACC_MODE, val);
+
+ /* Update val of portCfg register accordingly with all RxQueue types */
+ val = MVNETA_PORT_CONFIG_DEFL_VALUE(rxq_def);
+ mvreg_write(pp, MVNETA_PORT_CONFIG, val);
+
+ val = 0;
+ mvreg_write(pp, MVNETA_PORT_CONFIG_EXTEND, val);
+ mvreg_write(pp, MVNETA_RX_MIN_FRAME_SIZE, 64);
+
+ /* Build PORT_SDMA_CONFIG_REG */
+ val = 0;
+
+ /* Default burst size */
+ val |= MVNETA_TX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
+ val |= MVNETA_RX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
+ val |= MVNETA_RX_NO_DATA_SWAP | MVNETA_TX_NO_DATA_SWAP;
+
+ /* Assign port SDMA configuration */
+ mvreg_write(pp, MVNETA_SDMA_CONFIG, val);
+
+ /* Enable PHY polling in hardware for U-Boot */
+ val = mvreg_read(pp, MVNETA_UNIT_CONTROL);
+ val |= MVNETA_PHY_POLLING_ENABLE;
+ mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
+
+ mvneta_set_ucast_table(pp, -1);
+ mvneta_set_special_mcast_table(pp, -1);
+ mvneta_set_other_mcast_table(pp, -1);
+}
+
+/* Set unicast address */
+static void mvneta_set_ucast_addr(struct mvneta_port *pp, u8 last_nibble,
+ int queue)
+{
+ unsigned int unicast_reg;
+ unsigned int tbl_offset;
+ unsigned int reg_offset;
+
+ /* Locate the Unicast table entry */
+ last_nibble = (0xf & last_nibble);
+
+ /* offset from unicast tbl base */
+ tbl_offset = (last_nibble / 4) * 4;
+
+ /* offset within the above reg */
+ reg_offset = last_nibble % 4;
+
+ unicast_reg = mvreg_read(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset));
+
+ if (queue == -1) {
+ /* Clear accepts frame bit at specified unicast DA tbl entry */
+ unicast_reg &= ~(0xff << (8 * reg_offset));
+ } else {
+ unicast_reg &= ~(0xff << (8 * reg_offset));
+ unicast_reg |= ((0x01 | (queue << 1)) << (8 * reg_offset));
+ }
+
+ mvreg_write(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset), unicast_reg);
+}
+
+/* Set mac address */
+static void mvneta_mac_addr_set(struct mvneta_port *pp, unsigned char *addr,
+ int queue)
+{
+ unsigned int mac_h;
+ unsigned int mac_l;
+
+ if (queue != -1) {
+ mac_l = (addr[4] << 8) | (addr[5]);
+ mac_h = (addr[0] << 24) | (addr[1] << 16) |
+ (addr[2] << 8) | (addr[3] << 0);
+
+ mvreg_write(pp, MVNETA_MAC_ADDR_LOW, mac_l);
+ mvreg_write(pp, MVNETA_MAC_ADDR_HIGH, mac_h);
+ }
+
+ /* Accept frames of this address */
+ mvneta_set_ucast_addr(pp, addr[5], queue);
+}
+
+/* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */
+static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc,
+ u32 phys_addr, u32 cookie)
+{
+ rx_desc->buf_cookie = cookie;
+ rx_desc->buf_phys_addr = phys_addr;
+}
+
+/* Decrement sent descriptors counter */
+static void mvneta_txq_sent_desc_dec(struct mvneta_port *pp,
+ struct mvneta_tx_queue *txq,
+ int sent_desc)
+{
+ u32 val;
+
+ /* Only 255 TX descriptors can be updated at once */
+ while (sent_desc > 0xff) {
+ val = 0xff << MVNETA_TXQ_DEC_SENT_SHIFT;
+ mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
+ sent_desc = sent_desc - 0xff;
+ }
+
+ val = sent_desc << MVNETA_TXQ_DEC_SENT_SHIFT;
+ mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
+}
+
+/* Get number of TX descriptors already sent by HW */
+static int mvneta_txq_sent_desc_num_get(struct mvneta_port *pp,
+ struct mvneta_tx_queue *txq)
+{
+ u32 val;
+ int sent_desc;
+
+ val = mvreg_read(pp, MVNETA_TXQ_STATUS_REG(txq->id));
+ sent_desc = (val & MVNETA_TXQ_SENT_DESC_MASK) >>
+ MVNETA_TXQ_SENT_DESC_SHIFT;
+
+ return sent_desc;
+}
+
+/* Display more error info */
+static void mvneta_rx_error(struct mvneta_port *pp,
+ struct mvneta_rx_desc *rx_desc)
+{
+ u32 status = rx_desc->status;
+
+ if (!mvneta_rxq_desc_is_first_last(status)) {
+ netdev_err(pp->dev,
+ "bad rx status %08x (buffer oversize), size=%d\n",
+ status, rx_desc->data_size);
+ return;
+ }
+
+ switch (status & MVNETA_RXD_ERR_CODE_MASK) {
+ case MVNETA_RXD_ERR_CRC:
+ netdev_err(pp->dev, "bad rx status %08x (crc error), size=%d\n",
+ status, rx_desc->data_size);
+ break;
+ case MVNETA_RXD_ERR_OVERRUN:
+ netdev_err(pp->dev, "bad rx status %08x (overrun error), size=%d\n",
+ status, rx_desc->data_size);
+ break;
+ case MVNETA_RXD_ERR_LEN:
+ netdev_err(pp->dev, "bad rx status %08x (max frame length error), size=%d\n",
+ status, rx_desc->data_size);
+ break;
+ case MVNETA_RXD_ERR_RESOURCE:
+ netdev_err(pp->dev, "bad rx status %08x (resource error), size=%d\n",
+ status, rx_desc->data_size);
+ break;
+ }
+}
+
+static struct mvneta_rx_queue *mvneta_rxq_handle_get(struct mvneta_port *pp,
+ int rxq)
+{
+ return &pp->rxqs[rxq];
+}
+
+
+/* Drop packets received by the RXQ and free buffers */
+static void mvneta_rxq_drop_pkts(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq)
+{
+ int rx_done;
+
+ rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
+ if (rx_done)
+ mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
+}
+
+/* Handle rxq fill: allocates rxq skbs; called when initializing a port */
+static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
+ int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ u32 addr;
+
+ /* U-Boot special: Fill in the rx buffer addresses */
+ addr = buffer_loc.rx_buffers + (i * RX_BUFFER_SIZE);
+ mvneta_rx_desc_fill(rxq->descs + i, addr, addr);
+ }
+
+ /* Add this number of RX descriptors as non occupied (ready to
+ * get packets)
+ */
+ mvneta_rxq_non_occup_desc_add(pp, rxq, i);
+
+ return 0;
+}
+
+/* Rx/Tx queue initialization/cleanup methods */
+
+/* Create a specified RX queue */
+static int mvneta_rxq_init(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq)
+
+{
+ rxq->size = pp->rx_ring_size;
+
+ /* Allocate memory for RX descriptors */
+ rxq->descs_phys = (dma_addr_t)rxq->descs;
+ if (rxq->descs == NULL)
+ return -ENOMEM;
+
+ rxq->last_desc = rxq->size - 1;
+
+ /* Set Rx descriptors queue starting address */
+ mvreg_write(pp, MVNETA_RXQ_BASE_ADDR_REG(rxq->id), rxq->descs_phys);
+ mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), rxq->size);
+
+ /* Fill RXQ with buffers from RX pool */
+ mvneta_rxq_buf_size_set(pp, rxq, RX_BUFFER_SIZE);
+ mvneta_rxq_fill(pp, rxq, rxq->size);
+
+ return 0;
+}
+
+/* Cleanup Rx queue */
+static void mvneta_rxq_deinit(struct mvneta_port *pp,
+ struct mvneta_rx_queue *rxq)
+{
+ mvneta_rxq_drop_pkts(pp, rxq);
+
+ rxq->descs = NULL;
+ rxq->last_desc = 0;
+ rxq->next_desc_to_proc = 0;
+ rxq->descs_phys = 0;
+}
+
+/* Create and initialize a tx queue */
+static int mvneta_txq_init(struct mvneta_port *pp,
+ struct mvneta_tx_queue *txq)
+{
+ txq->size = pp->tx_ring_size;
+
+ /* Allocate memory for TX descriptors */
+ txq->descs_phys = (u32)txq->descs;
+ if (txq->descs == NULL)
+ return -ENOMEM;
+
+ txq->last_desc = txq->size - 1;
+
+ /* Set maximum bandwidth for enabled TXQs */
+ mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0x03ffffff);
+ mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0x3fffffff);
+
+ /* Set Tx descriptors queue starting address */
+ mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), txq->descs_phys);
+ mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), txq->size);
+
+ return 0;
+}
+
+/* Free allocated resources when mvneta_txq_init() fails to allocate memory*/
+static void mvneta_txq_deinit(struct mvneta_port *pp,
+ struct mvneta_tx_queue *txq)
+{
+ txq->descs = NULL;
+ txq->last_desc = 0;
+ txq->next_desc_to_proc = 0;
+ txq->descs_phys = 0;
+
+ /* Set minimum bandwidth for disabled TXQs */
+ mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0);
+ mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0);
+
+ /* Set Tx descriptors queue starting address and size */
+ mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), 0);
+ mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), 0);
+}
+
+/* Cleanup all Tx queues */
+static void mvneta_cleanup_txqs(struct mvneta_port *pp)
+{
+ int queue;
+
+ for (queue = 0; queue < txq_number; queue++)
+ mvneta_txq_deinit(pp, &pp->txqs[queue]);
+}
+
+/* Cleanup all Rx queues */
+static void mvneta_cleanup_rxqs(struct mvneta_port *pp)
+{
+ int queue;
+
+ for (queue = 0; queue < rxq_number; queue++)
+ mvneta_rxq_deinit(pp, &pp->rxqs[queue]);
+}
+
+
+/* Init all Rx queues */
+static int mvneta_setup_rxqs(struct mvneta_port *pp)
+{
+ int queue;
+
+ for (queue = 0; queue < rxq_number; queue++) {
+ int err = mvneta_rxq_init(pp, &pp->rxqs[queue]);
+ if (err) {
+ netdev_err(pp->dev, "%s: can't create rxq=%d\n",
+ __func__, queue);
+ mvneta_cleanup_rxqs(pp);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/* Init all tx queues */
+static int mvneta_setup_txqs(struct mvneta_port *pp)
+{
+ int queue;
+
+ for (queue = 0; queue < txq_number; queue++) {
+ int err = mvneta_txq_init(pp, &pp->txqs[queue]);
+ if (err) {
+ netdev_err(pp->dev, "%s: can't create txq=%d\n",
+ __func__, queue);
+ mvneta_cleanup_txqs(pp);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static void mvneta_start_dev(struct mvneta_port *pp)
+{
+ /* start the Rx/Tx activity */
+ mvneta_port_enable(pp);
+}
+
+static void mvneta_adjust_link(struct eth_device *dev)
+{
+ struct mvneta_port *pp = dev->priv;
+ struct phy_device *phydev = pp->phydev;
+ int status_change = 0;
+
+ if (phydev->link) {
+ if ((pp->speed != phydev->speed) ||
+ (pp->duplex != phydev->duplex)) {
+ u32 val;
+
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
+ MVNETA_GMAC_CONFIG_GMII_SPEED |
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX |
+ MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_DUPLEX_EN);
+
+ if (phydev->duplex)
+ val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+ if (phydev->speed == SPEED_1000)
+ val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
+ else
+ val |= MVNETA_GMAC_CONFIG_MII_SPEED;
+
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+
+ pp->duplex = phydev->duplex;
+ pp->speed = phydev->speed;
+ }
+ }
+
+ if (phydev->link != pp->link) {
+ if (!phydev->link) {
+ pp->duplex = -1;
+ pp->speed = 0;
+ }
+
+ pp->link = phydev->link;
+ status_change = 1;
+ }
+
+ if (status_change) {
+ if (phydev->link) {
+ u32 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val |= (MVNETA_GMAC_FORCE_LINK_PASS |
+ MVNETA_GMAC_FORCE_LINK_DOWN);
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ mvneta_port_up(pp);
+ } else {
+ mvneta_port_down(pp);
+ }
+ }
+}
+
+static int mvneta_open(struct eth_device *dev)
+{
+ struct mvneta_port *pp = dev->priv;
+ int ret;
+
+ ret = mvneta_setup_rxqs(pp);
+ if (ret)
+ return ret;
+
+ ret = mvneta_setup_txqs(pp);
+ if (ret)
+ return ret;
+
+ mvneta_adjust_link(dev);
+
+ mvneta_start_dev(pp);
+
+ return 0;
+}
+
+/* Initialize hw */
+static int mvneta_init(struct mvneta_port *pp)
+{
+ int queue;
+
+ /* Disable port */
+ mvneta_port_disable(pp);
+
+ /* Set port default values */
+ mvneta_defaults_set(pp);
+
+ pp->txqs = kzalloc(txq_number * sizeof(struct mvneta_tx_queue),
+ GFP_KERNEL);
+ if (!pp->txqs)
+ return -ENOMEM;
+
+ /* U-Boot special: use preallocated area */
+ pp->txqs[0].descs = buffer_loc.tx_descs;
+
+ /* Initialize TX descriptor rings */
+ for (queue = 0; queue < txq_number; queue++) {
+ struct mvneta_tx_queue *txq = &pp->txqs[queue];
+ txq->id = queue;
+ txq->size = pp->tx_ring_size;
+ }
+
+ pp->rxqs = kzalloc(rxq_number * sizeof(struct mvneta_rx_queue),
+ GFP_KERNEL);
+ if (!pp->rxqs) {
+ kfree(pp->txqs);
+ return -ENOMEM;
+ }
+
+ /* U-Boot special: use preallocated area */
+ pp->rxqs[0].descs = buffer_loc.rx_descs;
+
+ /* Create Rx descriptor rings */
+ for (queue = 0; queue < rxq_number; queue++) {
+ struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
+ rxq->id = queue;
+ rxq->size = pp->rx_ring_size;
+ }
+
+ return 0;
+}
+
+/* platform glue : initialize decoding windows */
+static void mvneta_conf_mbus_windows(struct mvneta_port *pp)
+{
+ const struct mbus_dram_target_info *dram;
+ u32 win_enable;
+ u32 win_protect;
+ int i;
+
+ dram = mvebu_mbus_dram_info();
+ for (i = 0; i < 6; i++) {
+ mvreg_write(pp, MVNETA_WIN_BASE(i), 0);
+ mvreg_write(pp, MVNETA_WIN_SIZE(i), 0);
+
+ if (i < 4)
+ mvreg_write(pp, MVNETA_WIN_REMAP(i), 0);
+ }
+
+ win_enable = 0x3f;
+ win_protect = 0;
+
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+ mvreg_write(pp, MVNETA_WIN_BASE(i), (cs->base & 0xffff0000) |
+ (cs->mbus_attr << 8) | dram->mbus_dram_target_id);
+
+ mvreg_write(pp, MVNETA_WIN_SIZE(i),
+ (cs->size - 1) & 0xffff0000);
+
+ win_enable &= ~(1 << i);
+ win_protect |= 3 << (2 * i);
+ }
+
+ mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
+}
+
+/* Power up the port */
+static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
+{
+ u32 ctrl;
+
+ /* MAC Cause register should be cleared */
+ mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
+
+ ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+
+ /* Even though it might look weird, when we're configured in
+ * SGMII or QSGMII mode, the RGMII bit needs to be set.
+ */
+ switch (phy_mode) {
+ case PHY_INTERFACE_MODE_QSGMII:
+ mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
+ ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
+ ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ ctrl |= MVNETA_GMAC2_PORT_RGMII;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Cancel Port Reset */
+ ctrl &= ~MVNETA_GMAC2_PORT_RESET;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
+
+ while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
+ MVNETA_GMAC2_PORT_RESET) != 0)
+ continue;
+
+ return 0;
+}
+
+/* Device initialization routine */
+static int mvneta_probe(struct eth_device *dev)
+{
+ struct mvneta_port *pp = dev->priv;
+ int err;
+
+ pp->tx_ring_size = MVNETA_MAX_TXD;
+ pp->rx_ring_size = MVNETA_MAX_RXD;
+
+ err = mvneta_init(pp);
+ if (err < 0) {
+ dev_err(&pdev->dev, "can't init eth hal\n");
+ return err;
+ }
+
+ mvneta_conf_mbus_windows(pp);
+
+ mvneta_mac_addr_set(pp, dev->enetaddr, rxq_def);
+
+ err = mvneta_port_power_up(pp, pp->phy_interface);
+ if (err < 0) {
+ dev_err(&pdev->dev, "can't power up port\n");
+ return err;
+ }
+
+ /* Call open() now as it needs to be done before runing send() */
+ mvneta_open(dev);
+
+ return 0;
+}
+
+/* U-Boot only functions follow here */
+
+/* SMI / MDIO functions */
+
+static int smi_wait_ready(struct mvneta_port *pp)
+{
+ u32 timeout = MVNETA_SMI_TIMEOUT;
+ u32 smi_reg;
+
+ /* wait till the SMI is not busy */
+ do {
+ /* read smi register */
+ smi_reg = mvreg_read(pp, MVNETA_SMI);
+ if (timeout-- == 0) {
+ printf("Error: SMI busy timeout\n");
+ return -EFAULT;
+ }
+ } while (smi_reg & MVNETA_SMI_BUSY);
+
+ return 0;
+}
+
+/*
+ * smi_reg_read - miiphy_read callback function.
+ *
+ * Returns 16bit phy register value, or 0xffff on error
+ */
+static int smi_reg_read(const char *devname, u8 phy_adr, u8 reg_ofs, u16 *data)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ struct mvneta_port *pp = dev->priv;
+ u32 smi_reg;
+ u32 timeout;
+
+ /* check parameters */
+ if (phy_adr > MVNETA_PHY_ADDR_MASK) {
+ printf("Error: Invalid PHY address %d\n", phy_adr);
+ return -EFAULT;
+ }
+
+ if (reg_ofs > MVNETA_PHY_REG_MASK) {
+ printf("Err: Invalid register offset %d\n", reg_ofs);
+ return -EFAULT;
+ }
+
+ /* wait till the SMI is not busy */
+ if (smi_wait_ready(pp) < 0)
+ return -EFAULT;
+
+ /* fill the phy address and regiser offset and read opcode */
+ smi_reg = (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS)
+ | (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS)
+ | MVNETA_SMI_OPCODE_READ;
+
+ /* write the smi register */
+ mvreg_write(pp, MVNETA_SMI, smi_reg);
+
+ /*wait till read value is ready */
+ timeout = MVNETA_SMI_TIMEOUT;
+
+ do {
+ /* read smi register */
+ smi_reg = mvreg_read(pp, MVNETA_SMI);
+ if (timeout-- == 0) {
+ printf("Err: SMI read ready timeout\n");
+ return -EFAULT;
+ }
+ } while (!(smi_reg & MVNETA_SMI_READ_VALID));
+
+ /* Wait for the data to update in the SMI register */
+ for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++)
+ ;
+
+ *data = (u16)(mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK);
+
+ return 0;
+}
+
+/*
+ * smi_reg_write - imiiphy_write callback function.
+ *
+ * Returns 0 if write succeed, -EINVAL on bad parameters
+ * -ETIME on timeout
+ */
+static int smi_reg_write(const char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ struct mvneta_port *pp = dev->priv;
+ u32 smi_reg;
+
+ /* check parameters */
+ if (phy_adr > MVNETA_PHY_ADDR_MASK) {
+ printf("Error: Invalid PHY address %d\n", phy_adr);
+ return -EFAULT;
+ }
+
+ if (reg_ofs > MVNETA_PHY_REG_MASK) {
+ printf("Err: Invalid register offset %d\n", reg_ofs);
+ return -EFAULT;
+ }
+
+ /* wait till the SMI is not busy */
+ if (smi_wait_ready(pp) < 0)
+ return -EFAULT;
+
+ /* fill the phy addr and reg offset and write opcode and data */
+ smi_reg = (data << MVNETA_SMI_DATA_OFFS);
+ smi_reg |= (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS)
+ | (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS);
+ smi_reg &= ~MVNETA_SMI_OPCODE_READ;
+
+ /* write the smi register */
+ mvreg_write(pp, MVNETA_SMI, smi_reg);
+
+ return 0;
+}
+
+static int mvneta_init_u_boot(struct eth_device *dev, bd_t *bis)
+{
+ struct mvneta_port *pp = dev->priv;
+ struct phy_device *phydev;
+
+ mvneta_port_power_up(pp, pp->phy_interface);
+
+ if (!pp->init || pp->link == 0) {
+ /* Set phy address of the port */
+ mvreg_write(pp, MVNETA_PHY_ADDR, pp->phyaddr);
+ phydev = phy_connect(pp->bus, pp->phyaddr, dev,
+ pp->phy_interface);
+
+ pp->phydev = phydev;
+ phy_config(phydev);
+ phy_startup(phydev);
+ if (!phydev->link) {
+ printf("%s: No link.\n", phydev->dev->name);
+ return -1;
+ }
+
+ /* Full init on first call */
+ mvneta_probe(dev);
+ pp->init = 1;
+ } else {
+ /* Upon all following calls, this is enough */
+ mvneta_port_up(pp);
+ mvneta_port_enable(pp);
+ }
+
+ return 0;
+}
+
+static int mvneta_send(struct eth_device *dev, void *ptr, int len)
+{
+ struct mvneta_port *pp = dev->priv;
+ struct mvneta_tx_queue *txq = &pp->txqs[0];
+ struct mvneta_tx_desc *tx_desc;
+ int sent_desc;
+ u32 timeout = 0;
+
+ /* Get a descriptor for the first part of the packet */
+ tx_desc = mvneta_txq_next_desc_get(txq);
+
+ tx_desc->buf_phys_addr = (u32)ptr;
+ tx_desc->data_size = len;
+ flush_dcache_range((u32)ptr, (u32)ptr + len);
+
+ /* First and Last descriptor */
+ tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC;
+ mvneta_txq_pend_desc_add(pp, txq, 1);
+
+ /* Wait for packet to be sent (queue might help with speed here) */
+ sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
+ while (!sent_desc) {
+ if (timeout++ > 10000) {
+ printf("timeout: packet not sent\n");
+ return -1;
+ }
+ sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
+ }
+
+ /* txDone has increased - hw sent packet */
+ mvneta_txq_sent_desc_dec(pp, txq, sent_desc);
+ return 0;
+
+ return 0;
+}
+
+static int mvneta_recv(struct eth_device *dev)
+{
+ struct mvneta_port *pp = dev->priv;
+ int rx_done;
+ int packets_done;
+ struct mvneta_rx_queue *rxq;
+
+ /* get rx queue */
+ rxq = mvneta_rxq_handle_get(pp, rxq_def);
+ rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
+ packets_done = rx_done;
+
+ while (packets_done--) {
+ struct mvneta_rx_desc *rx_desc;
+ unsigned char *data;
+ u32 rx_status;
+ int rx_bytes;
+
+ /*
+ * No cache invalidation needed here, since the desc's are
+ * located in a uncached memory region
+ */
+ rx_desc = mvneta_rxq_next_desc_get(rxq);
+
+ rx_status = rx_desc->status;
+ if (!mvneta_rxq_desc_is_first_last(rx_status) ||
+ (rx_status & MVNETA_RXD_ERR_SUMMARY)) {
+ mvneta_rx_error(pp, rx_desc);
+ /* leave the descriptor untouched */
+ continue;
+ }
+
+ /* 2 bytes for marvell header. 4 bytes for crc */
+ rx_bytes = rx_desc->data_size - 6;
+
+ /* give packet to stack - skip on first 2 bytes */
+ data = (u8 *)rx_desc->buf_cookie + 2;
+ /*
+ * No cache invalidation needed here, since the rx_buffer's are
+ * located in a uncached memory region
+ */
+ NetReceive(data, rx_bytes);
+ }
+
+ /* Update rxq management counters */
+ if (rx_done)
+ mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
+
+ return 0;
+}
+
+static void mvneta_halt(struct eth_device *dev)
+{
+ struct mvneta_port *pp = dev->priv;
+
+ mvneta_port_down(pp);
+ mvneta_port_disable(pp);
+}
+
+int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr)
+{
+ struct eth_device *dev;
+ struct mvneta_port *pp;
+ void *bd_space;
+
+ dev = calloc(1, sizeof(*dev));
+ if (dev == NULL)
+ return -ENOMEM;
+
+ pp = calloc(1, sizeof(*pp));
+ if (pp == NULL)
+ return -ENOMEM;
+
+ dev->priv = pp;
+
+ /*
+ * Allocate buffer area for descs and rx_buffers. This is only
+ * done once for all interfaces. As only one interface can
+ * be active. Make this area DMA save by disabling the D-cache
+ */
+ if (!buffer_loc.tx_descs) {
+ /* Align buffer area for descs and rx_buffers to 1MiB */
+ bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
+ mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE,
+ DCACHE_OFF);
+ buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space;
+ buffer_loc.rx_descs = (struct mvneta_rx_desc *)
+ ((u32)bd_space +
+ MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc));
+ buffer_loc.rx_buffers = (u32)
+ (bd_space +
+ MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc) +
+ MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc));
+ }
+
+ sprintf(dev->name, "neta%d", devnum);
+
+ pp->base = (void __iomem *)base_addr;
+ dev->iobase = base_addr;
+ dev->init = mvneta_init_u_boot;
+ dev->halt = mvneta_halt;
+ dev->send = mvneta_send;
+ dev->recv = mvneta_recv;
+ dev->write_hwaddr = NULL;
+
+ /*
+ * The PHY interface type is configured via the
+ * board specific CONFIG_SYS_NETA_INTERFACE_TYPE
+ * define.
+ */
+ pp->phy_interface = CONFIG_SYS_NETA_INTERFACE_TYPE;
+
+ eth_register(dev);
+
+ pp->phyaddr = phy_addr;
+ miiphy_register(dev->name, smi_reg_read, smi_reg_write);
+ pp->bus = miiphy_get_dev_by_name(dev->name);
+
+ return 1;
+}
projects / u-boot / commitdiff