ARM: uniphier: support ProXstream2, PH1-LD6b boards in single defconfig

These boards are similar enough to be supported in a single defconfig
file.  Distinguish one from another by "DEVICE_TREE" from the command
line.  The how-to-build in doc/README.uniphier should be also updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

diff --git a/configs/ph1_ld6b_defconfig b/configs/ph1_ld6b_defconfig
deleted file mode 100644 (file)
index bbcb344..0000000
--- a/configs/ph1_ld6b_defconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ARCH_UNIPHIER_PH1_LD6B=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld6b-ref"
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_SIMPLE_BUS=y
-CONFIG_NAND_DENALI=y
-CONFIG_SYS_NAND_DENALI_64BIT=y
-CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
-CONFIG_SPL_NAND_DENALI=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_STORAGE=y

diff --git a/configs/uniphier_pxs2_ld6b_defconfig b/configs/uniphier_pxs2_ld6b_defconfig
new file mode 100644 (file)
index 0000000..f8cb794
--- /dev/null
+++ b/configs/uniphier_pxs2_ld6b_defconfig
@@ -0,0 +1,31 @@
+CONFIG_ARM=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PROXSTREAM2=y
+CONFIG_ARCH_UNIPHIER_PH1_LD6B=y
+CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_TEXT_BASE=0x84000000
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-proxstream2-vodka"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_MISC is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
+CONFIG_NAND_DENALI=y
+CONFIG_SYS_NAND_DENALI_64BIT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_SPL_NAND_DENALI=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_UNIPHIER_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_STORAGE=y

diff --git a/doc/README.uniphier b/doc/README.uniphier
index 68cc05df1d3cf66d5b3e4d46934b8d4724f25dc1..7562e6fa90e0a47a5a236979d6b33a6c35b34e9d 100644 (file)
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -48,14 +48,18 @@ PH1-Pro5:
     $ make ph1_pro5_defconfig
     $ make CROSS_COMPILE=arm-linux-gnueabi-
 
-ProXstream2:
-    $ make pxs2_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi-
+ProXstream2 Gentil board:
+    $ make uniphier_pxs2_ld6b_defconfig
+    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-proxstream2-gentil
 
-PH1-LD6b:
-    $ make ph1_ld6b_defconfig
+ProXstream2 Vodka board:
+    $ make uniphier_pxs2_ld6b_defconfig
     $ make CROSS_COMPILE=arm-linux-gnueabi-
 
+PH1-LD6b reference board:
+    $ make uniphier_pxs2_ld6b_defconfig
+    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-ld6b-ref
+
 You may wish to change the "CROSS_COMPILE=arm-linux-gnueabi-"
 to use your favorite compiler.