]> git.sur5r.net Git - u-boot/commitdiff
fpga: Added support to load bit stream from SD/MMC
authorSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Fri, 14 Mar 2014 11:05:37 +0000 (16:35 +0530)
committerMichal Simek <michal.simek@xilinx.com>
Tue, 20 May 2014 13:23:46 +0000 (15:23 +0200)
Added support to load a bitstream image in chunks by reading it in
chunks from SD/MMC.
Command format:
loadfs [dev] [address] [image size] [blocksize] <interface>
       [<dev[:part]>] <filename>
Example: fpga loadfs 0 1000000 3dbafc 4000 mmc 0 fpga.bin

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
common/cmd_fpga.c
drivers/fpga/fpga.c
drivers/fpga/xilinx.c
drivers/fpga/zynqpl.c
include/configs/zynq-common.h
include/fpga.h
include/xilinx.h

index 802f3ecfffd8092f2372d756a0f39cd58106b5e9..bda5c8f798085093a603ee239c2d6ecc54641a58 100644 (file)
@@ -11,6 +11,7 @@
 #include <common.h>
 #include <command.h>
 #include <fpga.h>
+#include <fs.h>
 #include <malloc.h>
 
 /* Local functions */
@@ -25,6 +26,7 @@ static int fpga_get_op(char *opstr);
 #define FPGA_LOADMK 4
 #define FPGA_LOADP  5
 #define FPGA_LOADBP 6
+#define FPGA_LOADFS 7
 
 /* ------------------------------------------------------------------------- */
 /* command form:
@@ -47,6 +49,10 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
        const char *fit_uname = NULL;
        ulong fit_addr;
 #endif
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+       fpga_fs_info fpga_fsinfo;
+       fpga_fsinfo.fstype = FS_TYPE_ANY;
+#endif
 
        if (devstr)
                dev = (int) simple_strtoul(devstr, NULL, 16);
@@ -54,6 +60,14 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
                fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
 
        switch (argc) {
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+       case 9:
+               fpga_fsinfo.blocksize = (unsigned int)
+                                            simple_strtoul(argv[5], NULL, 16);
+               fpga_fsinfo.interface = argv[6];
+               fpga_fsinfo.dev_part = argv[7];
+               fpga_fsinfo.filename = argv[8];
+#endif
        case 5:         /* fpga <op> <dev> <data> <datasize> */
                data_size = simple_strtoul(argv[4], NULL, 16);
 
@@ -122,6 +136,13 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
        case FPGA_NONE:
        case FPGA_INFO:
                break;
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+       case FPGA_LOADFS:
+               /* Blocksize can be zero */
+               if (!fpga_fsinfo.interface || !fpga_fsinfo.dev_part ||
+                   !fpga_fsinfo.filename)
+                       wrong_parms = 1;
+#endif
        case FPGA_LOAD:
        case FPGA_LOADP:
        case FPGA_LOADB:
@@ -171,6 +192,12 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
                break;
 #endif
 
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+       case FPGA_LOADFS:
+               rc = fpga_fsload(dev, fpga_data, data_size, &fpga_fsinfo);
+               break;
+#endif
+
 #if defined(CONFIG_CMD_FPGA_LOADMK)
        case FPGA_LOADMK:
                switch (genimg_get_format(fpga_data)) {
@@ -287,6 +314,10 @@ static int fpga_get_op(char *opstr)
        else if (!strcmp("loadbp", opstr))
                op = FPGA_LOADBP;
 #endif
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+       else if (!strcmp("loadfs", opstr))
+               op = FPGA_LOADFS;
+#endif
 #if defined(CONFIG_CMD_FPGA_LOADMK)
        else if (!strcmp("loadmk", opstr))
                op = FPGA_LOADMK;
@@ -300,7 +331,11 @@ static int fpga_get_op(char *opstr)
        return op;
 }
 
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+U_BOOT_CMD(fpga, 9, 1, do_fpga,
+#else
 U_BOOT_CMD(fpga, 6, 1, do_fpga,
+#endif
           "loadable FPGA image support",
           "[operation type] [device number] [image address] [image size]\n"
           "fpga operations:\n"
@@ -318,6 +353,11 @@ U_BOOT_CMD(fpga, 6, 1, do_fpga,
           "Load device from bitstream buffer with partial bitstream"
           "(Xilinx only)\n"
 #endif
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+          "Load device from filesystem (FAT by default) (Xilinx only)\n"
+          "  loadfs [dev] [address] [image size] [blocksize] <interface>\n"
+          "        [<dev[:part]>] <filename>\n"
+#endif
 #if defined(CONFIG_CMD_FPGA_LOADMK)
           "  loadmk [dev] [address]\tLoad device generated with mkimage"
 #if defined(CONFIG_FIT)
index e77095090911c0e455228a81a59445115c086f72..37946d5e183a73d07bff9da4f324c8357a72a89c 100644 (file)
@@ -180,6 +180,34 @@ int __weak fpga_loadbitstream(int devnum, char *fpgadata, size_t size,
        return FPGA_FAIL;
 }
 
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+int fpga_fsload(int devnum, const void *buf, size_t size,
+                fpga_fs_info *fpga_fsinfo)
+{
+       int ret_val = FPGA_FAIL;           /* assume failure */
+       const fpga_desc *desc = fpga_validate(devnum, buf, size,
+                                             (char *)__func__);
+
+       if (desc) {
+               switch (desc->devtype) {
+               case fpga_xilinx:
+#if defined(CONFIG_FPGA_XILINX)
+                       ret_val = xilinx_loadfs(desc->devdesc, buf, size,
+                                               fpga_fsinfo);
+#else
+                       fpga_no_sup((char *)__func__, "Xilinx devices");
+#endif
+                       break;
+               default:
+                       printf("%s: Invalid or unsupported device type %d\n",
+                              __func__, desc->devtype);
+               }
+       }
+
+       return ret_val;
+}
+#endif
+
 /*
  * Generic multiplexing code
  */
index ab9f51733e9f14744702e0f2e5be15492828effd..3795c1aff6e267640c4ef869c0e344c52e3b9f93 100644 (file)
@@ -142,6 +142,22 @@ int xilinx_load(xilinx_desc *desc, const void *buf, size_t bsize,
        return desc->operations->load(desc, buf, bsize, bstype);
 }
 
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+int xilinx_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,
+                  fpga_fs_info *fpga_fsinfo)
+{
+       if (!xilinx_validate(desc, (char *)__func__)) {
+               printf("%s: Invalid device descriptor\n", __func__);
+               return FPGA_FAIL;
+       }
+
+       if (!desc->operations->loadfs)
+               return FPGA_FAIL;
+
+       return desc->operations->loadfs(desc, buf, bsize, fpga_fsinfo);
+}
+#endif
+
 int xilinx_dump(xilinx_desc *desc, const void *buf, size_t bsize)
 {
        if (!xilinx_validate (desc, (char *)__FUNCTION__)) {
index 915f07735a8d2445bc5cdf3801d124e66c00a082..68fe0f3b03afb99085fada927806cbe7afca6407 100644 (file)
@@ -9,6 +9,7 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <fs.h>
 #include <zynqpl.h>
 #include <linux/sizes.h>
 #include <asm/arch/hardware.h>
@@ -398,6 +399,87 @@ static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize,
        return FPGA_SUCCESS;
 }
 
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,
+                      fpga_fs_info *fsinfo)
+{
+       unsigned long ts; /* Timestamp */
+       u32 isr_status, swap;
+       u32 partialbit = 0;
+       u32 blocksize;
+       u32 pos = 0;
+       int fstype;
+       char *interface, *dev_part, *filename;
+
+       blocksize = fsinfo->blocksize;
+       interface = fsinfo->interface;
+       dev_part = fsinfo->dev_part;
+       filename = fsinfo->filename;
+       fstype = fsinfo->fstype;
+
+       if (fs_set_blk_dev(interface, dev_part, fstype))
+               return FPGA_FAIL;
+
+       if (fs_read(filename, (u32) buf, pos, blocksize) < 0)
+               return FPGA_FAIL;
+
+       if (zynq_validate_bitstream(desc, buf, bsize, blocksize, &swap,
+                                   &partialbit))
+               return FPGA_FAIL;
+
+       dcache_disable();
+
+       do {
+               buf = zynq_align_dma_buffer((u32 *)buf, blocksize, swap);
+
+               if (zynq_dma_transfer((u32)buf | 1, blocksize >> 2,
+                                     0xffffffff, 0))
+                       return FPGA_FAIL;
+
+               bsize -= blocksize;
+               pos   += blocksize;
+
+               if (fs_set_blk_dev(interface, dev_part, fstype))
+                       return FPGA_FAIL;
+
+               if (bsize > blocksize) {
+                       if (fs_read(filename, (u32) buf, pos, blocksize) < 0)
+                               return FPGA_FAIL;
+               } else {
+                       if (fs_read(filename, (u32) buf, pos, bsize) < 0)
+                               return FPGA_FAIL;
+               }
+       } while (bsize > blocksize);
+
+       buf = zynq_align_dma_buffer((u32 *)buf, blocksize, swap);
+
+       if (zynq_dma_transfer((u32)buf | 1, bsize >> 2, 0xffffffff, 0))
+               return FPGA_FAIL;
+
+       dcache_enable();
+
+       isr_status = readl(&devcfg_base->int_sts);
+
+       /* Check FPGA configuration completion */
+       ts = get_timer(0);
+       while (!(isr_status & DEVCFG_ISR_PCFG_DONE)) {
+               if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) {
+                       printf("%s: Timeout wait for FPGA to config\n",
+                              __func__);
+                       return FPGA_FAIL;
+               }
+               isr_status = readl(&devcfg_base->int_sts);
+       }
+
+       debug("%s: FPGA config done\n", __func__);
+
+       if (!partialbit)
+               zynq_slcr_devcfg_enable();
+
+       return FPGA_SUCCESS;
+}
+#endif
+
 static int zynq_dump(xilinx_desc *desc, const void *buf, size_t bsize)
 {
        return FPGA_FAIL;
@@ -405,6 +487,9 @@ static int zynq_dump(xilinx_desc *desc, const void *buf, size_t bsize)
 
 struct xilinx_fpga_op zynq_op = {
        .load = zynq_load,
+#if defined(CONFIG_CMD_FPGA_LOADFS)
+       .loadfs = zynq_loadfs,
+#endif
        .dump = zynq_dump,
        .info = zynq_info,
 };
index fb600b8605c3e3e508767950c61809ba630741e4..97632452f8210d5293cab2d70bf5bcb9072f43be 100644 (file)
 #define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMD_FPGA_LOADP
 #define CONFIG_CMD_FPGA_LOADBP
+#define CONFIG_CMD_FPGA_LOADFS
 
 /* Open Firmware flat tree */
 #define CONFIG_OF_LIBFDT
index 49efd375f7473b0675a3e83e7b20b1b0c6deec66..914024c17cb8841578ea622e112bb7aaf7fccb68 100644 (file)
@@ -35,6 +35,13 @@ typedef struct {             /* typedef fpga_desc */
        void *devdesc;          /* real device descriptor */
 } fpga_desc;                   /* end, typedef fpga_desc */
 
+typedef struct {                /* typedef fpga_desc */
+       unsigned int blocksize;
+       char *interface;
+       char *dev_part;
+       char *filename;
+       int fstype;
+} fpga_fs_info;
 
 typedef enum {
        BIT_FULL = 0,
@@ -47,6 +54,8 @@ extern int fpga_add(fpga_type devtype, void *desc);
 extern int fpga_count(void);
 extern int fpga_load(int devnum, const void *buf, size_t bsize,
                     bitstream_type bstype);
+extern int fpga_fsload(int devnum, const void *buf, size_t size,
+                      fpga_fs_info *fpga_fsinfo);
 extern int fpga_loadbitstream(int devnum, char *fpgadata, size_t size,
                              bitstream_type bstype);
 extern int fpga_dump(int devnum, const void *buf, size_t bsize);
index 7d83ba20956206291e0c86277835bf21e01984f1..aebcb3bfdf29d7f87e4701fd01387bfe8f95b34a 100644 (file)
@@ -46,6 +46,7 @@ typedef struct {              /* typedef xilinx_desc */
 
 struct xilinx_fpga_op {
        int (*load)(xilinx_desc *, const void *, size_t, bitstream_type);
+       int (*loadfs)(xilinx_desc *, const void *, size_t, fpga_fs_info *);
        int (*dump)(xilinx_desc *, const void *, size_t);
        int (*info)(xilinx_desc *);
 };
@@ -56,6 +57,8 @@ int xilinx_load(xilinx_desc *desc, const void *image, size_t size,
                bitstream_type bstype);
 int xilinx_dump(xilinx_desc *desc, const void *buf, size_t bsize);
 int xilinx_info(xilinx_desc *desc);
+int xilinx_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,
+                 fpga_fs_info *fpga_fsinfo);
 
 /* Board specific implementation specific function types
  *********************************************************************/