powerpc/86xx: Convert MPC8641HPCN to use common SRIO init code

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index 30a7b706fa903aba91a78933dc8445224fe10f3b..08f1eb25adf1979c45ec8a8146068bb5c573eef5 100644 (file)
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008,2010 Freescale Semiconductor, Inc.
+ * Copyright 2008,2010-2011 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -52,9 +52,6 @@
 struct law_entry law_table[] = {
 #if !defined(CONFIG_SPD_EEPROM)
        SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
-#endif
-#if defined(CONFIG_RIO)
-       SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 #endif
        SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
        SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_LBC),

diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index fea087649628ba0833e18d8551a7096df66512d1..0cca603ff7518566c3b0bfd5d25431d117955ae5 100644 (file)
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2006, 2010 Freescale Semiconductor.
+ * Copyright 2006, 2010-2011 Freescale Semiconductor.
  *
  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
  *
@@ -57,18 +57,14 @@
  */
 #define CONFIG_SYS_SCRATCH_VA  0xe0000000
 
-/*
- * set this to enable Rapid IO.  PCI and RIO are mutually exclusive
- */
-/*#define CONFIG_RIO           1*/
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1                   /* SRIO port 1 */
 
-#ifndef CONFIG_RIO                     /* RIO/PCI are mutually exclusive */
 #define CONFIG_PCI             1       /* Enable PCI/PCIE */
 #define CONFIG_PCIE1           1       /* PCIE controler 1 (ULI bridge) */
 #define CONFIG_PCIE2           1       /* PCIE controler 2 (slot) */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#endif
 #define CONFIG_FSL_LAW         1       /* Use common FSL law init code */
 
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
@@ -319,13 +315,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * RapidIO MMU
  */
-#define CONFIG_SYS_RIO_MEM_BASE        0x80000000      /* base address */
+#define CONFIG_SYS_SRIO1_MEM_BASE      0x80000000      /* base address */
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_RIO_MEM_PHYS  0x0000000c00000000ULL
+#define CONFIG_SYS_SRIO1_MEM_PHYS  0x0000000c00000000ULL
 #else
-#define CONFIG_SYS_RIO_MEM_PHYS        CONFIG_SYS_RIO_MEM_BASE
+#define CONFIG_SYS_SRIO1_MEM_PHYS      CONFIG_SYS_SRIO1_MEM_BASE
 #endif
-#define CONFIG_SYS_RIO_MEM_SIZE        0x20000000      /* 128M */
+#define CONFIG_SYS_SRIO1_MEM_SIZE      0x20000000      /* 128M */
 
 /*
  * General PCI
@@ -514,18 +510,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
                                 | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT2U      CONFIG_SYS_DBAT2U
 #else /* CONFIG_RIO */
-#define CONFIG_SYS_DBAT2L      (BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \
+#define CONFIG_SYS_DBAT2L      (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS) \
                                 | BATL_PP_RW | BATL_CACHEINHIBIT | \
                                 BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U      (CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M \
+#define CONFIG_SYS_DBAT2U      (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M \
                                 | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L      (BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \
+#define CONFIG_SYS_IBAT2L      (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS) \
                                 | BATL_PP_RW | BATL_CACHEINHIBIT)
 
-#define CONFIG_SYS_DBAT2L      (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW \
+#define CONFIG_SYS_DBAT2L      (CONFIG_SYS_SRIO1_MEM_PHYS | BATL_PP_RW \
                        | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U      (CONFIG_SYS_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L      (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT2U      (CONFIG_SYS_SRIO1_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L      (CONFIG_SYS_SRIO1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT2U      CONFIG_SYS_DBAT2U
 #endif