Add initial sun8i H3 support, only uart + mmc are supported for now.
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
        sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0);
        sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0);
        sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_H3)
+       sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
+       sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
+       sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
 #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I)
        sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0);
        sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0);
 
        puts("CPU:   Allwinner A23 (SUN8I)\n");
 #elif defined CONFIG_MACH_SUN8I_A33
        puts("CPU:   Allwinner A33 (SUN8I)\n");
+#elif defined CONFIG_MACH_SUN8I_H3
+       puts("CPU:   Allwinner H3 (SUN8I)\n");
 #elif defined CONFIG_MACH_SUN9I
        puts("CPU:   Allwinner A80 (SUN9I)\n");
 #else
 
 #define SUN7I_GPA_GMAC         5
 #define SUN6I_GPA_SDC2         5
 #define SUN6I_GPA_SDC3         4
+#define SUN8I_H3_GPA_UART0     2
 
 #define SUN4I_GPB_TWI0         2
 #define SUN4I_GPB_TWI1         2
 
        select SUPPORT_SPL
        select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
 
+config MACH_SUN8I_H3
+       bool "sun8i (Allwinner H3)"
+       select CPU_V7
+       select SUNXI_GEN_SUN6I
+
 config MACH_SUN9I
        bool "sun9i (Allwinner A80)"
        select CPU_V7
 # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
 config MACH_SUN8I
        bool
-       default y if MACH_SUN8I_A23 || MACH_SUN8I_A33
+       default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3
 
 
 config DRAM_CLK
 
        prompt "Select Sunxi PMIC Variant"
        depends on ARCH_SUNXI
        default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
-       default AXP221_POWER if MACH_SUN6I || MACH_SUN8I
+       default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
+       default SUNXI_NO_PMIC if MACH_SUN8I_H3
 
 config SUNXI_NO_PMIC
        boolean "board without a pmic"
 
 config AXP221_POWER
        boolean "axp221 / axp223 pmic support"
-       depends on MACH_SUN6I || MACH_SUN8I
+       depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
        ---help---
        Select this to enable support for the axp221/axp223 pmic found on most
        A23 and A31 boards.
 
 #define CONFIG_ARMV7_PSCI_NR_CPUS      2
 #elif defined(CONFIG_MACH_SUN8I_A33)
 #define CONFIG_ARMV7_PSCI_NR_CPUS      4
+#elif defined(CONFIG_MACH_SUN8I_H3)
+#define CONFIG_ARMV7_PSCI_NR_CPUS      4
 #else
 #error Unsupported sun8i variant
 #endif