ppc4xx: Canyonlands: Init SATA/PCIe port correctly

Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
interface. This usage can be configured with the jumper J6. This patch
correctly configures the SATA/PCIe PHY for SATA usage when this jumper
is installed.

Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index fa2868face669ed4100408418b86e6e8336d97f3..9986e9a9c6ef8a87684f91282919222af5f82a30 100644 (file)
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -43,9 +43,9 @@ int board_early_init_f(void)
        u32 sdr0_cust0;
        u32 pvr = get_pvr();
 
-       /*------------------------------------------------------------------+
+       /*
         * Setup the interrupt controller polarities, triggers, etc.
-        *------------------------------------------------------------------*/
+        */
        mtdcr(uic0sr, 0xffffffff);      /* clear all */
        mtdcr(uic0er, 0x00000000);      /* disable all */
        mtdcr(uic0cr, 0x00000005);      /* ATI & UIC1 crit are critical */
@@ -126,7 +126,28 @@ int board_early_init_f(void)
        return 0;
 }
 
-int checkboard (void)
+static void canyonlands_sata_init(int board_type)
+{
+       u32 reg;
+
+       if (board_type == BOARD_CANYONLANDS_SATA) {
+               /* Put SATA in reset */
+               SDR_WRITE(SDR0_SRST1, 0x00020001);
+
+               /* Set the phy for SATA, not PCI-E port 0 */
+               reg = SDR_READ(PESDR0_PHY_CTL_RST);
+               SDR_WRITE(PESDR0_PHY_CTL_RST, (reg & 0xeffffffc) | 0x00000001);
+               reg = SDR_READ(PESDR0_L0CLK);
+               SDR_WRITE(PESDR0_L0CLK, (reg & 0xfffffff8) | 0x00000007);
+               SDR_WRITE(PESDR0_L0CDRCTL, 0x00003111);
+               SDR_WRITE(PESDR0_L0DRV, 0x00000104);
+
+               /* Bring SATA out of reset */
+               SDR_WRITE(SDR0_SRST1, 0x00000000);
+       }
+}
+
+int checkboard(void)
 {
        char *s = getenv("serial#");
        u32 pvr = get_pvr();
@@ -161,6 +182,8 @@ int checkboard (void)
        }
        putc('\n');
 
+       canyonlands_sata_init(gd->board_type);
+
        return (0);
 }
 
@@ -226,37 +249,36 @@ int testdram(void)
 }
 #endif
 
-/*************************************************************************
+/*
  *  pci_target_init
  *
  *     The bootstrap configuration provides default settings for the pci
  *     inbound map (PIM). But the bootstrap config choices are limited and
  *     may not be sufficient for a given board.
- *
- ************************************************************************/
+ */
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
-       /*-------------------------------------------------------------------+
+       /*
         * Disable everything
-        *-------------------------------------------------------------------*/
+        */
        out_le32((void *)PCIX0_PIM0SA, 0); /* disable */
        out_le32((void *)PCIX0_PIM1SA, 0); /* disable */
        out_le32((void *)PCIX0_PIM2SA, 0); /* disable */
        out_le32((void *)PCIX0_EROMBA, 0); /* disable expansion rom */
 
-       /*-------------------------------------------------------------------+
+       /*
         * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
         * strapping options to not support sizes such as 128/256 MB.
-        *-------------------------------------------------------------------*/
+        */
        out_le32((void *)PCIX0_PIM0LAL, CFG_SDRAM_BASE);
        out_le32((void *)PCIX0_PIM0LAH, 0);
        out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
        out_le32((void *)PCIX0_BAR0, 0);
 
-       /*-------------------------------------------------------------------+
+       /*
         * Program the board's subsystem id/vendor id
-        *-------------------------------------------------------------------*/
+        */
        out_le16((void *)PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
        out_le16((void *)PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);