]> git.sur5r.net Git - u-boot/commitdiff
ARM: remove broken "at91rm9200dk" board
authorWolfgang Denk <wd@denx.de>
Fri, 26 Aug 2011 02:25:48 +0000 (02:25 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Sun, 4 Sep 2011 09:36:15 +0000 (11:36 +0200)
Signed-off-by: Wolfgang Denk <wd@denx.de>
board/atmel/at91rm9200dk/Makefile [deleted file]
board/atmel/at91rm9200dk/at91rm9200dk.c [deleted file]
board/atmel/at91rm9200dk/config.mk [deleted file]
board/atmel/at91rm9200dk/flash.c [deleted file]
board/atmel/at91rm9200dk/led.c [deleted file]
board/atmel/at91rm9200dk/mux.c [deleted file]
board/atmel/at91rm9200dk/partition.c [deleted file]
boards.cfg
doc/README.scrapyard
include/configs/at91rm9200dk.h [deleted file]

diff --git a/board/atmel/at91rm9200dk/Makefile b/board/atmel/at91rm9200dk/Makefile
deleted file mode 100644 (file)
index bc3dbc6..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB    = $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-y += flash.o
-COBJS-y += led.o
-ifdef CONFIG_HAS_DATAFLASH
-COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += mux.o
-COBJS-y += partition.o
-endif
-
-SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS   := $(addprefix $(obj),$(COBJS-y))
-SOBJS  := $(addprefix $(obj),$(SOBJS))
-
-$(LIB):        $(obj).depend $(OBJS) $(SOBJS)
-       $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
-       rm -f $(SOBJS) $(OBJS)
-
-distclean:     clean
-       rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91rm9200dk/at91rm9200dk.c b/board/atmel/at91rm9200dk/at91rm9200dk.c
deleted file mode 100644 (file)
index 49b5fe3..0000000
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <exports.h>
-#include <netdev.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-       /* Enable Ctrlc */
-       console_init_f ();
-
-       /* Correct IRDA resistor problem */
-       /* Set PA23_TXD in Output */
-       ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-
-       /* memory and cpu-speed are setup before relocation */
-       /* so we do _nothing_ here */
-
-       /* arch number of AT91RM9200DK-Board */
-       gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
-       /* adress of boot parameters */
-       gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-       return 0;
-}
-
-void board_reset (void)
-{
-       AT91PS_PIO pio = AT91C_BASE_PIOA;
-
-       /* Clear PA19 to trigger the hard reset */
-       writel(0x00080000, pio->PIO_CODR);
-       writel(0x00080000, pio->PIO_OER);
-       writel(0x00080000, pio->PIO_PER);
-}
-
-int dram_init (void)
-{
-       gd->bd->bi_dram[0].start = PHYS_SDRAM;
-       gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-       return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- *     at91rm9200_GetPhyInterface
- * Description:
- *     Initialise the interface functions to the PHY
- * Arguments:
- *     None
- * Return value:
- *     None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
-       p_phyops->Init = dm9161_InitPhy;
-       p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
-       p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
-       p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
-       int rc = 0;
-       rc = at91emac_register(bis, 0);
-       return rc;
-}
-#endif
-
-/*
- * Disk On Chip (NAND) Millenium initialization.
- * The NAND lives in the CS2* space
- */
-#if defined(CONFIG_CMD_NAND)
-extern ulong nand_probe (ulong physadr);
-
-#define AT91_SMARTMEDIA_BASE 0x40000000        /* physical address to access memory on NCS3 */
-void nand_init (void)
-{
-       /* Setup Smart Media, fitst enable the address range of CS3 */
-       *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
-       /* set the bus interface characteristics based on
-          tDS Data Set up Time 30 - ns
-          tDH Data Hold Time 20 - ns
-          tALS ALE Set up Time 20 - ns
-          16ns at 60 MHz ~= 3  */
-/*memory mapping structures */
-#define SM_ID_RWH      (5 << 28)
-#define SM_RWH         (1 << 28)
-#define SM_RWS         (0 << 24)
-#define SM_TDF         (1 << 8)
-#define SM_NWS         (3)
-       AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
-               AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
-               SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
-
-       /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
-       *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
-               AT91C_PC3_BFBAA_SMWE;
-       *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
-               AT91C_PC3_BFBAA_SMWE;
-
-       /* Configure PC2 as input (signal READY of the SmartMedia) */
-       *AT91C_PIOC_PER = AT91C_PC2_BFAVD;      /* enable direct output enable */
-       *AT91C_PIOC_ODR = AT91C_PC2_BFAVD;      /* disable output */
-
-       /* Configure PB1 as input (signal Card Detect of the SmartMedia) */
-       *AT91C_PIOB_PER = AT91C_PIO_PB1;        /* enable direct output enable */
-       *AT91C_PIOB_ODR = AT91C_PIO_PB1;        /* disable output */
-
-       /* PIOB and PIOC clock enabling */
-       *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
-       *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-
-       if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
-               printf ("  No SmartMedia card inserted\n");
-#ifdef DEBUG
-       printf ("  SmartMedia card inserted\n");
-
-       printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
-#endif
-       printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
-}
-#endif
diff --git a/board/atmel/at91rm9200dk/config.mk b/board/atmel/at91rm9200dk/config.mk
deleted file mode 100644 (file)
index 2077692..0000000
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c
deleted file mode 100644 (file)
index be22743..0000000
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-ulong myflush(void);
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef
-{
-       unsigned int sector_number;
-       unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgAT49BV16x4[] =
-{
-       {  8,  8*1024 },        /*   8 *  8 kBytes sectors */
-       {  2, 32*1024 },        /*   2 * 32 kBytes sectors */
-       { 30, 64*1024 },        /*  30 * 64 kBytes sectors */
-};
-
-OrgDef OrgAT49BV16x4A[] =
-{
-       {  8,  8*1024 },        /*   8 *  8 kBytes sectors */
-       { 31, 64*1024 },        /*  31 * 64 kBytes sectors */
-};
-
-OrgDef OrgAT49BV6416[] =
-{
-       {   8,  8*1024 },       /*   8 *  8 kBytes sectors */
-       { 127, 64*1024 },       /* 127 * 64 kBytes sectors */
-};
-
-flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/* AT49BV1614A Codes */
-#define FLASH_CODE1            0xAA
-#define FLASH_CODE2            0x55
-#define ID_IN_CODE             0x90
-#define ID_OUT_CODE            0xF0
-
-
-#define CMD_READ_ARRAY         0x00F0
-#define CMD_UNLOCK1            0x00AA
-#define CMD_UNLOCK2            0x0055
-#define CMD_ERASE_SETUP                0x0080
-#define CMD_ERASE_CONFIRM      0x0030
-#define CMD_PROGRAM            0x00A0
-#define CMD_UNLOCK_BYPASS      0x0020
-#define CMD_SECTOR_UNLOCK      0x0070
-
-#define MEM_FLASH_ADDR1                (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1)))
-#define MEM_FLASH_ADDR2                (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1)))
-
-#define BIT_ERASE_DONE         0x0080
-#define BIT_RDY_MASK           0x0080
-#define BIT_PROGRAM_ERROR      0x0020
-#define BIT_TIMEOUT            0x80000000 /* our flag */
-
-#define READY 1
-#define ERR   2
-#define TMO   4
-
-/*-----------------------------------------------------------------------
- */
-void flash_identification (flash_info_t * info)
-{
-       volatile u16 manuf_code, device_code, add_device_code;
-
-       MEM_FLASH_ADDR1 = FLASH_CODE1;
-       MEM_FLASH_ADDR2 = FLASH_CODE2;
-       MEM_FLASH_ADDR1 = ID_IN_CODE;
-
-       manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE;
-       device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2);
-       add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1));
-
-       MEM_FLASH_ADDR1 = FLASH_CODE1;
-       MEM_FLASH_ADDR2 = FLASH_CODE2;
-       MEM_FLASH_ADDR1 = ID_OUT_CODE;
-
-       /* Vendor type */
-       info->flash_id = ATM_MANUFACT & FLASH_VENDMASK;
-       printf ("Atmel: ");
-
-       if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-
-               if ((add_device_code & FLASH_TYPEMASK) ==
-                       (ATM_ID_BV1614A & FLASH_TYPEMASK)) {
-                       info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK;
-                       printf ("AT49BV1614A (16Mbit)\n");
-               } else {                                /* AT49BV1614 Flash */
-                       info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
-                       printf ("AT49BV1614 (16Mbit)\n");
-               }
-
-       } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) {
-               info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK;
-               printf ("AT49BV6416 (64Mbit)\n");
-       }
-}
-
-ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks)
-{
-       int i, nb_sectors = 0;
-
-       for (i=0; i<nb_blocks; i++){
-               nb_sectors += pOrgDef[i].sector_number;
-       }
-
-       return nb_sectors;
-}
-
-void flash_unlock_sector(flash_info_t * info, unsigned int sector)
-{
-       volatile u16 *addr = (volatile u16 *) (info->start[sector]);
-
-       MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-       *addr = CMD_SECTOR_UNLOCK;
-}
-
-
-ulong flash_init (void)
-{
-       int i, j, k;
-       unsigned int flash_nb_blocks, sector;
-       unsigned int start_address;
-       OrgDef *pOrgDef;
-
-       ulong size = 0;
-
-       for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-               ulong flashbase = 0;
-
-               flash_identification (&flash_info[i]);
-
-               if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
-                       (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-
-                       pOrgDef = OrgAT49BV16x4;
-                       flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef);
-               } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
-                       (ATM_ID_BV1614A & FLASH_TYPEMASK)){     /* AT49BV1614A Flash */
-
-                       pOrgDef = OrgAT49BV16x4A;
-                       flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef);
-               } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
-                       (ATM_ID_BV6416 & FLASH_TYPEMASK)){      /* AT49BV6416 Flash */
-
-                       pOrgDef = OrgAT49BV6416;
-                       flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef);
-               } else {
-                       flash_nb_blocks = 0;
-                       pOrgDef = OrgAT49BV16x4;
-               }
-
-               flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks);
-               memset (flash_info[i].protect, 0, flash_info[i].sector_count);
-
-               if (i == 0)
-                       flashbase = PHYS_FLASH_1;
-               else
-                       panic ("configured too many flash banks!\n");
-
-               sector = 0;
-               start_address = flashbase;
-               flash_info[i].size = 0;
-
-               for (j = 0; j < flash_nb_blocks; j++) {
-                       for (k = 0; k < pOrgDef[j].sector_number; k++) {
-                               flash_info[i].start[sector++] = start_address;
-                               start_address += pOrgDef[j].sector_size;
-                               flash_info[i].size += pOrgDef[j].sector_size;
-                       }
-               }
-
-               size += flash_info[i].size;
-
-               if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
-                       (ATM_ID_BV6416 & FLASH_TYPEMASK)){      /* AT49BV6416 Flash */
-
-                       /* Unlock all sectors at reset */
-                       for (j=0; j<flash_info[i].sector_count; j++){
-                               flash_unlock_sector(&flash_info[i], j);
-                       }
-               }
-       }
-
-       /* Protect binary boot image */
-       flash_protect (FLAG_PROTECT_SET,
-                      CONFIG_SYS_FLASH_BASE,
-                      CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]);
-
-       /* Protect environment variables */
-       flash_protect (FLAG_PROTECT_SET,
-                      CONFIG_ENV_ADDR,
-                      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
-       /* Protect U-Boot gzipped image */
-       flash_protect (FLAG_PROTECT_SET,
-                      CONFIG_SYS_U_BOOT_BASE,
-                      CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]);
-
-       return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-       int i;
-
-       switch (info->flash_id & FLASH_VENDMASK) {
-       case (ATM_MANUFACT & FLASH_VENDMASK):
-               printf ("Atmel: ");
-               break;
-       default:
-               printf ("Unknown Vendor ");
-               break;
-       }
-
-       switch (info->flash_id & FLASH_TYPEMASK) {
-       case (ATM_ID_BV1614 & FLASH_TYPEMASK):
-               printf ("AT49BV1614 (16Mbit)\n");
-               break;
-       case (ATM_ID_BV1614A & FLASH_TYPEMASK):
-               printf ("AT49BV1614A (16Mbit)\n");
-               break;
-       case (ATM_ID_BV6416 & FLASH_TYPEMASK):
-               printf ("AT49BV6416 (64Mbit)\n");
-               break;
-       default:
-               printf ("Unknown Chip Type\n");
-               return;
-       }
-
-       printf ("  Size: %ld MB in %d Sectors\n",
-               info->size >> 20, info->sector_count);
-
-       printf ("  Sector Start Addresses:");
-       for (i = 0; i < info->sector_count; i++) {
-               if ((i % 5) == 0) {
-                       printf ("\n   ");
-               }
-               printf (" %08lX%s", info->start[i],
-                       info->protect[i] ? " (RO)" : "     ");
-       }
-       printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-       ulong result;
-       int iflag, cflag, prot, sect;
-       int rc = ERR_OK;
-       int chip1;
-       ulong start;
-
-       /* first look for protection bits */
-
-       if (info->flash_id == FLASH_UNKNOWN)
-               return ERR_UNKNOWN_FLASH_TYPE;
-
-       if ((s_first < 0) || (s_first > s_last)) {
-               return ERR_INVAL;
-       }
-
-       if ((info->flash_id & FLASH_VENDMASK) !=
-               (ATM_MANUFACT & FLASH_VENDMASK)) {
-               return ERR_UNKNOWN_FLASH_VENDOR;
-       }
-
-       prot = 0;
-       for (sect = s_first; sect <= s_last; ++sect) {
-               if (info->protect[sect]) {
-                       prot++;
-               }
-       }
-       if (prot)
-               return ERR_PROTECTED;
-
-       /*
-        * Disable interrupts which might cause a timeout
-        * here. Remember that our exception vectors are
-        * at address 0 in the flash, and we don't want a
-        * (ticker) exception to happen while the flash
-        * chip is in programming mode.
-        */
-       cflag = icache_status ();
-       icache_disable ();
-       iflag = disable_interrupts ();
-
-       /* Start erase on unprotected sectors */
-       for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-               printf ("Erasing sector %2d ... ", sect);
-
-               /* arm simple, non interrupt dependent timer */
-               start = get_timer(0);
-
-               if (info->protect[sect] == 0) { /* not protected */
-                       volatile u16 *addr = (volatile u16 *) (info->start[sect]);
-
-                       MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-                       MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-                       MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-                       MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-                       MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-                       *addr = CMD_ERASE_CONFIRM;
-
-                       /* wait until flash is ready */
-                       chip1 = 0;
-
-                       do {
-                               result = *addr;
-
-                               /* check timeout */
-                               if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-                                       MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-                                       chip1 = TMO;
-                                       break;
-                               }
-
-                               if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
-                                       chip1 = READY;
-
-                       } while (!chip1);
-
-                       MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-                       if (chip1 == ERR) {
-                               rc = ERR_PROG_ERROR;
-                               goto outahere;
-                       }
-                       if (chip1 == TMO) {
-                               rc = ERR_TIMOUT;
-                               goto outahere;
-                       }
-
-                       printf ("ok.\n");
-               } else {                        /* it was protected */
-                       printf ("protected!\n");
-               }
-       }
-
-       if (ctrlc ())
-               printf ("User Interrupt!\n");
-
-outahere:
-       /* allow flash to settle - wait 10 ms */
-       udelay_masked (10000);
-
-       if (iflag)
-               enable_interrupts ();
-
-       if (cflag)
-               icache_enable ();
-
-       return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-       volatile u16 *addr = (volatile u16 *) dest;
-       ulong result;
-       int rc = ERR_OK;
-       int cflag, iflag;
-       int chip1;
-       ulong start;
-
-       /*
-        * Check if Flash is (sufficiently) erased
-        */
-       result = *addr;
-       if ((result & data) != data)
-               return ERR_NOT_ERASED;
-
-       /*
-        * Disable interrupts which might cause a timeout
-        * here. Remember that our exception vectors are
-        * at address 0 in the flash, and we don't want a
-        * (ticker) exception to happen while the flash
-        * chip is in programming mode.
-        */
-       cflag = icache_status ();
-       icache_disable ();
-       iflag = disable_interrupts ();
-
-       MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-       MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-       MEM_FLASH_ADDR1 = CMD_PROGRAM;
-       *addr = data;
-
-       /* arm simple, non interrupt dependent timer */
-       start = get_timer(0);
-
-       /* wait until flash is ready */
-       chip1 = 0;
-       do {
-               result = *addr;
-
-               /* check timeout */
-               if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-                       chip1 = ERR | TMO;
-                       break;
-               }
-               if (!chip1 && ((result & 0x80) == (data & 0x80)))
-                       chip1 = READY;
-
-       } while (!chip1);
-
-       *addr = CMD_READ_ARRAY;
-
-       if (chip1 == ERR || *addr != data)
-               rc = ERR_PROG_ERROR;
-
-       if (iflag)
-               enable_interrupts ();
-
-       if (cflag)
-               icache_enable ();
-
-       return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-       ulong wp, data;
-       int rc;
-
-       if (addr & 1) {
-               printf ("unaligned destination not supported\n");
-               return ERR_ALIGN;
-       };
-
-       if ((int) src & 1) {
-               printf ("unaligned source not supported\n");
-               return ERR_ALIGN;
-       };
-
-       wp = addr;
-
-       while (cnt >= 2) {
-               data = *((volatile u16 *) src);
-               if ((rc = write_word (info, wp, data)) != 0) {
-                       return (rc);
-               }
-               src += 2;
-               wp += 2;
-               cnt -= 2;
-       }
-
-       if (cnt == 1) {
-               data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) <<
-                                                                                  8);
-               if ((rc = write_word (info, wp, data)) != 0) {
-                       return (rc);
-               }
-               src += 1;
-               wp += 1;
-               cnt -= 1;
-       };
-
-       return ERR_OK;
-}
diff --git a/board/atmel/at91rm9200dk/led.c b/board/atmel/at91rm9200dk/led.c
deleted file mode 100644 (file)
index 47a3bfc..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright 2006
- * Atmel Nordic AB <www.atmel.com>
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-
-#define        GREEN_LED       AT91C_PIO_PB0
-#define        YELLOW_LED      AT91C_PIO_PB1
-#define        RED_LED AT91C_PIO_PB2
-
-void   green_LED_on(void)
-{
-       AT91PS_PIO      PIOB    = AT91C_BASE_PIOB;
-       PIOB->PIO_CODR          = GREEN_LED;
-}
-
-void    yellow_LED_on(void)
-{
-       AT91PS_PIO      PIOB    = AT91C_BASE_PIOB;
-       PIOB->PIO_CODR          = YELLOW_LED;
-}
-
-void    red_LED_on(void)
-{
-       AT91PS_PIO      PIOB    = AT91C_BASE_PIOB;
-       PIOB->PIO_CODR          = RED_LED;
-}
-
-void   green_LED_off(void)
-{
-       AT91PS_PIO      PIOB    = AT91C_BASE_PIOB;
-       PIOB->PIO_SODR          = GREEN_LED;
-}
-
-void   yellow_LED_off(void)
-{
-       AT91PS_PIO      PIOB    = AT91C_BASE_PIOB;
-       PIOB->PIO_SODR          = YELLOW_LED;
-}
-
-void   red_LED_off(void)
-{
-       AT91PS_PIO      PIOB    = AT91C_BASE_PIOB;
-       PIOB->PIO_SODR          = RED_LED;
-}
-
-
-void coloured_LED_init (void)
-{
-       AT91PS_PIO      PIOB    = AT91C_BASE_PIOB;
-       AT91PS_PMC      PMC     = AT91C_BASE_PMC;
-       PMC->PMC_PCER           = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */
-       /* Disable peripherals on LEDs */
-       PIOB->PIO_PER           = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
-       /* Enable pins as outputs */
-       PIOB->PIO_OER           = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
-       /* Turn all LEDs OFF */
-       PIOB->PIO_SODR          = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
-}
diff --git a/board/atmel/at91rm9200dk/mux.c b/board/atmel/at91rm9200dk/mux.c
deleted file mode 100644 (file)
index a00563e..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <config.h>
-#include <common.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-int AT91F_GetMuxStatus(void) {
-       AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
-       AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
-
-
-       if(AT91C_BASE_PIOB->PIO_ODSR & CONFIG_SYS_DATAFLASH_MMC_PIO)
-               return 1;
-
-       return 0;
-}
-
-void AT91F_SelectMMC(void) {
-       AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
-       AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
-       /* Set Output */
-       AT91C_BASE_PIOB->PIO_SODR = CONFIG_SYS_DATAFLASH_MMC_PIO;
-}
-
-void AT91F_SelectSPI(void) {
-       AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
-       AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
-       /* Clear Output */
-       AT91C_BASE_PIOB->PIO_CODR = CONFIG_SYS_DATAFLASH_MMC_PIO;
-}
diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c
deleted file mode 100644 (file)
index c739b11..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-       {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},       /* Logical adress, CS */
-       {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-       {0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
-       {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-       {0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
-       {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
-       {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-};
index 331267dc203dc691de06e68da20ab0545d6c7ef8..12c82df77be26ea1202e28e4bf8f40b6d90de424 100644 (file)
@@ -57,7 +57,6 @@ at91rm9200ek_ram             arm         arm920t     at91rm9200ek        atmel
 eb_cpux9k2                   arm         arm920t     -                   BuS            at91
 cpuat91                      arm         arm920t     cpuat91             eukrea         at91        cpuat91
 cpuat91_ram                  arm         arm920t     cpuat91             eukrea         at91        cpuat91:RAMBOOT
-at91rm9200dk                 arm         arm920t     -                   atmel          at91rm9200
 mx1ads                       arm         arm920t     -                   -              imx
 scb9328                      arm         arm920t     -                   -              imx
 cm4008                       arm         arm920t     -                   -              ks8695
index e49d1f78ce9b318b2b7378fb36cbf4710d4b7f85..8da6db6a4536d943ccdac901b4f1290503d285e0 100644 (file)
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
 
 Board  Arch    CPU     removed     Commit      last known maintainer/contact
 =============================================================================
+at91rm9200dk arm arm920t -       2011-07-17
 m501sk arm     arm920t -         2011-07-17
 kb9202 arm     arm920t -         2011-07-17
 csb637 arm     arm920t -         2011-07-17
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
deleted file mode 100644 (file)
index 15de310..0000000
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * Rick Bronson <rick@efn.org>
- *
- * Configuration settings for the AT91RM9200DK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK       179712000       /* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MASTER_CLOCK     59904000        /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-/* #define AT91C_MASTER_CLOCK  44928000 */     /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
-
-#define AT91_SLOW_CLOCK                32768   /* slow clock */
-
-#define CONFIG_ARM920T         1       /* This is an ARM920T Core      */
-#define CONFIG_AT91RM9200      1       /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_AT91RM9200DK    1       /* on an AT91RM9200DK Board     */
-#undef  CONFIG_USE_IRQ                 /* we don't need IRQ/FIQ stuff  */
-#define USE_920T_MMU           1
-
-#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG      1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR         1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL        0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL        0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL   0x20263E04 /* 179.712000 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL   0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL    0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL        0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL        0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL        0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM       0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1      0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL   0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1        0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0  or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW                   /* don't include RTS/CTS flow control support   */
-
-#undef CONFIG_MODEM_SUPPORT            /* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY      3
-/* #define CONFIG_ENV_OVERWRITE        1 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
-#include <asm/arch/AT91RM9200.h>       /* needed for port definitions */
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000  /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START               PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END                 CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-#define CONFIG_NET_MULTI               1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC         1
-#define CONFIG_SYS_RX_ETH_BUFFER       8
-#else
-#define CONFIG_DRIVER_ETHER            1
-#endif
-
-#define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_AT91C_USE_RMII
-
-/* AC Characteristics */
-/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS (0xC << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-#define CONFIG_HAS_DATAFLASH           1
-#define CONFIG_SYS_SPI_WRITE_TOUT              (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS         2
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES         16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0    0xC0000000      /* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3    0xD0000000      /* Logical adress for CS3 */
-
-#define PHYS_FLASH_1                   0x10000000
-#define PHYS_FLASH_SIZE                        0x200000  /* 2 megs main flash */
-#define CONFIG_SYS_FLASH_BASE                  PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS             1
-#define CONFIG_SYS_MAX_FLASH_SECT              256
-#define CONFIG_SYS_FLASH_ERASE_TOUT            (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT            (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#undef CONFIG_ENV_IS_IN_DATAFLASH
-
-#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_ENV_OFFSET                      0x20000
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE                        0x2000  /* 0x8000 */
-#else
-#define CONFIG_ENV_IS_IN_FLASH         1
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_ENV_ADDR                        (PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
-#define CONFIG_ENV_SIZE                        0x2000  /* 0x8000 */
-#else
-#define CONFIG_ENV_ADDR                        (PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
-#define CONFIG_ENV_SIZE                        0x10000 /* sectors are 64K here */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-#endif /* CONFIG_ENV_IS_IN_DATAFLASH */
-
-
-#define CONFIG_SYS_LOAD_ADDR           0x21000000  /* default load address */
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_BOOT_SIZE           0x6000 /* 24 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE         (PHYS_FLASH_1 + 0x10000)
-#define CONFIG_SYS_U_BOOT_SIZE         0x10000 /* 64 KBytes */
-#else
-#define CONFIG_SYS_BOOT_SIZE           0x00 /* 0 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE         PHYS_FLASH_1
-#define CONFIG_SYS_U_BOOT_SIZE         0x60000 /* 384 KBytes */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 115200, 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT              "U-Boot> "      /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS             16              /* max number of command args */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2       /* AT91C_TC0_CMR is implicitly set to */
-                                               /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE       (32*1024)       /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif