flash: add stm32f3x support

add support for the new stm32f3x family from stmicro:
http://www.st.com/stm32f3

Change-Id: Icd1db95bb2767d9c0ecef24deefa92b4fdaa4f14
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/735
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c
index f05a4aaa3f8a4d4df3d2edbd594bc5ccebaa1b6b..e7e795d322b4fea52565f7fe3178b323ce2a1168 100644 (file)
--- a/src/flash/nor/stm32f1x.c
+++ b/src/flash/nor/stm32f1x.c
@@ -830,6 +830,9 @@ static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id)
        } else if (((cpuid >> 4) & 0xFFF) == 0xC23) {
                /* 0xC23 is M3 devices */
                device_id_register = 0xE0042000;
+       } else if (((cpuid >> 4) & 0xFFF) == 0xC24) {
+               /* 0xC24 is M4 devices */
+               device_id_register = 0xE0042000;
        } else {
                LOG_ERROR("Cannot identify target as a stm32x");
                return ERROR_FAIL;
@@ -858,6 +861,9 @@ static int stm32x_get_flash_size(struct flash_bank *bank, uint16_t *flash_size_i
        } else if (((cpuid >> 4) & 0xFFF) == 0xC23) {
                /* 0xC23 is M3 devices */
                flash_size_reg = 0x1FFFF7E0;
+       } else if (((cpuid >> 4) & 0xFFF) == 0xC24) {
+               /* 0xC24 is M4 devices */
+               flash_size_reg = 0x1FFFF7CC;
        } else {
                LOG_ERROR("Cannot identify target as a stm32x");
                return ERROR_FAIL;
@@ -957,6 +963,17 @@ static int stm32x_probe(struct flash_bank *bank)
                        LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash");
                        flash_size_in_kb = 128;
                }
+       } else if ((device_id & 0xfff) == 0x422) {
+               /* stm32f30x - we have 2k pages
+                * 2 pages for a protection area */
+               page_size = 2048;
+               stm32x_info->ppage_size = 2;
+
+               /* check for early silicon */
+               if (flash_size_in_kb == 0xffff) {
+                       LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 256k flash");
+                       flash_size_in_kb = 256;
+               }
        } else if ((device_id & 0xfff) == 0x428) {
                /* value line High density - we have 2k pages
                 * 4 pages for a protection area */
@@ -993,6 +1010,17 @@ static int stm32x_probe(struct flash_bank *bank)
                        stm32x_info->register_base = FLASH_REG_BASE_B1;
                        base_address = 0x08080000;
                }
+       } else if ((device_id & 0xfff) == 0x432) {
+               /* stm32f37x - we have 2k pages
+                * 2 pages for a protection area */
+               page_size = 2048;
+               stm32x_info->ppage_size = 2;
+
+               /* check for early silicon */
+               if (flash_size_in_kb == 0xffff) {
+                       LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 256k flash");
+                       flash_size_in_kb = 256;
+               }
        } else if ((device_id & 0xfff) == 0x440) {
                /* stm32f0x - we have 1k pages
                 * 4 pages for a protection area */
@@ -1158,6 +1186,20 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
                                snprintf(buf, buf_size, "Z");
                                break;
 
+                       default:
+                               snprintf(buf, buf_size, "unknown");
+                               break;
+               }
+       } else if ((device_id & 0xfff) == 0x422) {
+               printed = snprintf(buf, buf_size, "stm32f30x - Rev: ");
+               buf += printed;
+               buf_size -= printed;
+
+               switch (device_id >> 16) {
+                       case 0x1000:
+                               snprintf(buf, buf_size, "1.0");
+                               break;
+
                        default:
                                snprintf(buf, buf_size, "unknown");
                                break;
@@ -1190,6 +1232,20 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
                                snprintf(buf, buf_size, "A");
                                break;
 
+                       default:
+                               snprintf(buf, buf_size, "unknown");
+                               break;
+               }
+       } else if ((device_id & 0xfff) == 0x432) {
+               printed = snprintf(buf, buf_size, "stm32f37x - Rev: ");
+               buf += printed;
+               buf_size -= printed;
+
+               switch (device_id >> 16) {
+                       case 0x1000:
+                               snprintf(buf, buf_size, "1.0");
+                               break;
+
                        default:
                                snprintf(buf, buf_size, "unknown");
                                break;

diff --git a/tcl/target/stm32f3x.cfg b/tcl/target/stm32f3x.cfg
new file mode 100644 (file)
index 0000000..1f05143
--- /dev/null
+++ b/tcl/target/stm32f3x.cfg
@@ -0,0 +1,63 @@
+# script for stm32f3x family
+
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME stm32f3x
+}
+
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 16kB
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x4000
+}
+
+# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
+#
+# Since we may be running of an RC oscilator, we crank down the speed a
+# bit more to be on the safe side. Perhaps superstition, but if are
+# running off a crystal, we can run closer to the limit. Note
+# that there can be a pretty wide band where things are more or less stable.
+adapter_khz 1000
+
+adapter_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#jtag scan chain
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # See STM Document RM0316
+  # Section 29.6.3 - corresponds to Cortex-M4 r0p1
+   set _CPUTAPID 0x4ba00477
+}
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+if { [info exists BSTAPID] } {
+   set _BSTAPID $BSTAPID
+} else {
+  # See STM Document RM0316
+  # Section 29.6.2
+  set _BSTAPID 0x06432041
+}
+jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME
+
+# if srst is not fitted use SYSRESETREQ to
+# perform a soft reset
+cortex_m3 reset_config sysresetreq

diff --git a/tcl/target/stm32f3x_stlink.cfg b/tcl/target/stm32f3x_stlink.cfg
new file mode 100644 (file)
index 0000000..bc86ed9
--- /dev/null
+++ b/tcl/target/stm32f3x_stlink.cfg
@@ -0,0 +1,20 @@
+#
+# STM32f3x stlink pseudo target
+#
+
+if { [info exists CHIPNAME] == 0 } {
+   set CHIPNAME stm32f3x
+}
+
+if { [info exists CPUTAPID] == 0 } {
+   set CPUTAPID 0x1ba01477
+}
+
+if { [info exists WORKAREASIZE] == 0 } {
+   set WORKAREASIZE 0x4000
+}
+
+source [find target/stm32_stlink.cfg]
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME