gd->bd->bi_flashstart = CFG_FLASH_BASE;
gd->bd->bi_flashsize = CFG_FLASH_SIZE;
- gd->bd->bi_flashoffset = __edata_lma - _text;
+ gd->bd->bi_flashoffset = _edata - _text;
flash_info[0].size = CFG_FLASH_SIZE;
flash_info[0].sector_count = 135;
}
. = ALIGN(32);
__flashprog_end = .;
+ _etext = .;
- . = ALIGN(8);
.rodata : {
*(.rodata)
*(.rodata.*)
}
- _etext = .;
- __data_lma = ALIGN(8);
- . = 0x24000000;
+ . = ALIGN(8);
_data = .;
- .data : AT(__data_lma) {
+ .data : {
*(.data)
*(.data.*)
}
. = ALIGN(4);
__u_boot_cmd_start = .;
- __u_boot_cmd_lma = __data_lma + (__u_boot_cmd_start - _data);
- .u_boot_cmd : AT(__u_boot_cmd_lma) {
+ .u_boot_cmd : {
KEEP(*(.u_boot_cmd))
}
__u_boot_cmd_end = .;
+ . = ALIGN(4);
+ _got = .;
+ .got : {
+ *(.got)
+ }
+ _egot = .;
+
. = ALIGN(8);
_edata = .;
- __edata_lma = __u_boot_cmd_lma + (_edata - __u_boot_cmd_start);
- .bss : AT(__edata_lma) {
+ .bss : {
*(.bss)
*(.bss.*)
}
* We're running at interrupt level 3, so we don't need to save
* r8-r12 or lr to the stack.
*/
- mov r8, lo(timer_overflow)
- orh r8, hi(timer_overflow)
+ lda.w r8, timer_overflow
ld.w r9, r8[0]
mov r10, -1
mtsr SYSREG_COMPARE, r10
#include <asm/sysreg.h>
#include <asm/ptrace.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static const char * const cpu_modes[8] = {
"Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
"Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
printf("CPU Mode: %s\n", cpu_modes[mode]);
/* Avoid exception loops */
- if (regs->sp >= CFG_INIT_SP_ADDR
- || regs->sp < (CFG_INIT_SP_ADDR - CONFIG_STACKSIZE))
+ if (regs->sp < CFG_SDRAM_BASE || regs->sp >= gd->stack_end)
printf("\nStack pointer seems bogus, won't do stack dump\n");
else
- dump_mem("\nStack: ", regs->sp, CFG_INIT_SP_ADDR);
+ dump_mem("\nStack: ", regs->sp, gd->stack_end);
panic("Unhandled exception\n");
}
static int set_interrupt_handler(unsigned int nr, void (*handler)(void),
unsigned int priority)
{
+ extern void _evba(void);
unsigned long intpr;
unsigned long handler_addr = (unsigned long)handler;
+ handler_addr -= (unsigned long)&_evba;
+
if ((handler_addr & HANDLER_MASK) != handler_addr
|| (priority & INTLEV_MASK) != priority)
return -EINVAL;
2: lddpc sp, sp_init
- /*
- * Relocate the data section and initialize .bss. Everything
- * is guaranteed to be at least doubleword aligned by the
- * linker script.
- */
- lddpc r12, .Ldata_vma
- lddpc r11, .Ldata_lma
- lddpc r10, .Ldata_end
- sub r10, r12
-4: ld.d r8, r11++
- sub r10, 8
- st.d r12++, r8
- brne 4b
-
- mov r8, 0
- mov r9, 0
- lddpc r10, .Lbss_end
- sub r10, r12
-4: sub r10, 8
- st.d r12++, r8
- brne 4b
-
/* Initialize the GOT pointer */
lddpc r6, got_init
3: rsub r6, pc
- ld.w pc, r6[board_init_f@got]
+
+ /* Let's go */
+ rjmp board_init_f
.align 2
.type sp_init,@object
.long CFG_INIT_SP_ADDR
got_init:
.long 3b - _GLOBAL_OFFSET_TABLE_
-.Ldata_lma:
- .long __data_lma
-.Ldata_vma:
- .long _data
-.Ldata_end:
- .long _edata
-.Lbss_end:
- .long _end
+
+ /*
+ * void relocate_code(new_sp, new_gd, monitor_addr)
+ *
+ * Relocate the u-boot image into RAM and continue from there.
+ * Does not return.
+ */
+ .global relocate_code
+ .type relocate_code,@function
+relocate_code:
+ mov sp, r12 /* use new stack */
+ mov r12, r11 /* save new_gd */
+ mov r11, r10 /* save destination address */
+
+ /* copy .text section and flush the cache along the way */
+ lda.w r8, _text
+ lda.w r9, _etext
+ sub lr, r10, r8 /* relocation offset */
+
+1: ldm r8++, r0-r3
+ stm r10, r0-r3
+ sub r10, -16
+ ldm r8++, r0-r3
+ stm r10, r0-r3
+ sub r10, -16
+ cp.w r8, r9
+ cache r10[-4], 0x0d /* dcache clean/invalidate */
+ cache r10[-4], 0x01 /* icache invalidate */
+ brlt 1b
+
+ /* flush write buffer */
+ sync 0
+
+ /* copy data sections */
+ lda.w r9, _edata
+1: ld.d r0, r8++
+ st.d r10++, r0
+ cp.w r8, r9
+ brlt 1b
+
+ /* zero out .bss */
+ mov r0, 0
+ mov r1, 0
+ lda.w r9, _end
+ sub r9, r8
+1: st.d r10++, r0
+ sub r9, 8
+ brgt 1b
+
+ /* jump to RAM */
+ sub r0, pc, . - in_ram
+ add pc, r0, lr
+
+ .align 2
+in_ram:
+ /* find the new GOT and relocate it */
+ lddpc r6, got_init_reloc
+3: rsub r6, pc
+ mov r8, r6
+ lda.w r9, _egot
+ lda.w r10, _got
+ sub r9, r10
+1: ld.w r0, r8[0]
+ add r0, lr
+ st.w r8++, r0
+ sub r9, 4
+ brgt 1b
+
+ /* Move the exception handlers */
+ mfsr r2, SYSREG_EVBA
+ add r2, lr
+ mtsr SYSREG_EVBA, r2
+
+ /* Do the rest of the initialization sequence */
+ call board_init_r
+
+ .align 2
+got_init_reloc:
+ .long 3b - _GLOBAL_OFFSET_TABLE_
unsigned long flags;
unsigned long baudrate;
unsigned long sdram_size;
+ unsigned long stack_end; /* highest stack address */
unsigned long have_console; /* serial_init() was called */
unsigned long reloc_off; /* Relocation Offset */
unsigned long env_addr; /* Address of env struct */
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
#define CFG_MALLOC_LEN (256*1024)
-#define CFG_MALLOC_END \
- ({ \
- DECLARE_GLOBAL_DATA_PTR; \
- CFG_SDRAM_BASE + gd->sdram_size; \
- })
-#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN)
-
#define CFG_DMA_ALLOC_LEN (16384)
-#define CFG_DMA_ALLOC_END (CFG_MALLOC_START)
-#define CFG_DMA_ALLOC_START (CFG_DMA_ALLOC_END - CFG_DMA_ALLOC_LEN)
+
/* Allow 2MB for the kernel run-time image */
#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000)
#define CFG_BOOTPARAMS_LEN (16 * 1024)
static unsigned long mem_malloc_end = 0;
static unsigned long mem_malloc_brk = 0;
-/* The malloc area is wherever the board wants it to be */
+/* The malloc area is right below the monitor image in RAM */
static void mem_malloc_init(void)
{
- mem_malloc_start = CFG_MALLOC_START;
- mem_malloc_end = CFG_MALLOC_END;
+ unsigned long monitor_addr;
+
+ monitor_addr = CFG_MONITOR_BASE + gd->reloc_off;
+ mem_malloc_end = monitor_addr;
+ mem_malloc_start = mem_malloc_end - CFG_MALLOC_LEN;
mem_malloc_brk = mem_malloc_start;
printf("malloc: Using memory from 0x%08lx to 0x%08lx\n",
void board_init_f(ulong unused)
{
gd_t gd_data;
+ gd_t *new_gd;
+ bd_t *bd;
+ unsigned long *new_sp;
+ unsigned long monitor_len;
+ unsigned long monitor_addr;
+ unsigned long addr;
/* Initialize the global data pointer */
memset(&gd_data, 0, sizeof(gd_data));
/* Perform initialization sequence */
board_early_init_f();
cpu_init();
- timer_init();
env_init();
init_baudrate();
serial_init();
display_banner();
board_init_memories();
- board_init_r(gd, CFG_MONITOR_BASE);
+ /* If we have no SDRAM, we can't go on */
+ if (!gd->sdram_size)
+ panic("No working SDRAM available\n");
+
+ /*
+ * Now that we have DRAM mapped and working, we can
+ * relocate the code and continue running from DRAM.
+ *
+ * Reserve memory at end of RAM for (top down in that order):
+ * - u-boot image
+ * - heap for malloc()
+ * - board info struct
+ * - global data struct
+ * - stack
+ */
+ addr = CFG_SDRAM_BASE + gd->sdram_size;
+ monitor_len = _end - _text;
+
+ /*
+ * Reserve memory for u-boot code, data and bss.
+ * Round down to next 4 kB limit.
+ */
+ addr -= monitor_len;
+ addr &= ~(4096UL - 1);
+ monitor_addr = addr;
+
+ /* Reserve memory for malloc() */
+ addr -= CFG_MALLOC_LEN;
+
+ /* Allocate a Board Info struct on a word boundary */
+ addr -= sizeof(bd_t);
+ addr &= ~3UL;
+ gd->bd = bd = (bd_t *)addr;
+
+ /* Allocate a new global data copy on a 8-byte boundary. */
+ addr -= sizeof(gd_t);
+ addr &= ~7UL;
+ new_gd = (gd_t *)addr;
+
+ /* And finally, a new, bigger stack. */
+ new_sp = (unsigned long *)addr;
+ gd->stack_end = addr;
+ *(--new_sp) = 0;
+ *(--new_sp) = 0;
+
+ /*
+ * Initialize the board information struct with the
+ * information we have.
+ */
+ bd->bi_dram[0].start = CFG_SDRAM_BASE;
+ bd->bi_dram[0].size = gd->sdram_size;
+ bd->bi_baudrate = gd->baudrate;
+
+ memcpy(new_gd, gd, sizeof(gd_t));
+
+ relocate_code((unsigned long)new_sp, new_gd, monitor_addr);
}
void board_init_r(gd_t *new_gd, ulong dest_addr)
{
+ extern void malloc_bin_reloc (void);
+#ifndef CFG_ENV_IS_NOWHERE
+ extern char * env_name_spec;
+#endif
+ cmd_tbl_t *cmdtp;
+ bd_t *bd;
+
gd = new_gd;
+ bd = gd->bd;
+
+ gd->flags |= GD_FLG_RELOC;
+ gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
monitor_flash_len = _edata - _text;
- mem_malloc_init();
- gd->bd = malloc(sizeof(bd_t));
- memset(gd->bd, 0, sizeof(bd_t));
- gd->bd->bi_baudrate = gd->baudrate;
- gd->bd->bi_dram[0].start = CFG_SDRAM_BASE;
- gd->bd->bi_dram[0].size = gd->sdram_size;
+ /*
+ * We have to relocate the command table manually
+ */
+ for (cmdtp = &__u_boot_cmd_start;
+ cmdtp != &__u_boot_cmd_end; cmdtp++) {
+ unsigned long addr;
+
+ addr = (unsigned long)cmdtp->cmd + gd->reloc_off;
+ cmdtp->cmd = (typeof(cmdtp->cmd))addr;
+
+ addr = (unsigned long)cmdtp->name + gd->reloc_off;
+ cmdtp->name = (typeof(cmdtp->name))addr;
+
+ if (cmdtp->usage) {
+ addr = (unsigned long)cmdtp->usage + gd->reloc_off;
+ cmdtp->usage = (typeof(cmdtp->usage))addr;
+ }
+#ifdef CFG_LONGHELP
+ if (cmdtp->help) {
+ addr = (unsigned long)cmdtp->help + gd->reloc_off;
+ cmdtp->help = (typeof(cmdtp->help))addr;
+ }
+#endif
+ }
+
+ /* there are some other pointer constants we must deal with */
+#ifndef CFG_ENV_IS_NOWHERE
+ env_name_spec += gd->reloc_off;
+#endif
+ timer_init();
+ mem_malloc_init();
+ malloc_bin_reloc();
board_init_info();
flash_init();
- if (gd->bd->bi_flashsize)
+ if (bd->bi_flashsize)
display_flash_config();
- if (gd->bd->bi_dram[0].size)
+ if (bd->bi_dram[0].size)
display_dram_config();
gd->bd->bi_boot_params = malloc(CFG_BOOTPARAMS_LEN);
projects / u-boot / commitdiff