i.MX6Q: icore: Add SPL_OF_CONTROL support

Add OF_CONTROL support for SPL code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
index 8b9d5b4b0894ee3550490ef2cc8d52de1a674879..65cbf5abb390c1f092b65b9577e6702babf34b94 100644 (file)
--- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
@@ -100,6 +100,7 @@
 };
 
 &usdhc3 {
+       u-boot,dm-spl;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3>;
        cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -165,6 +166,7 @@
        };
 
        pinctrl_usdhc3: usdhc3grp {
+               u-boot,dm-spl;
                fsl,pins = <
                        MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17070
                        MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10070

diff --git a/arch/arm/dts/imx6qdl-icore.dtsi b/arch/arm/dts/imx6qdl-icore.dtsi
index a485c3eb95c6d4e392a786dd92e0a391b06a028b..06d9bc3a42633f64801ce5428640bbf9c1ad5e37 100644 (file)
--- a/arch/arm/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/dts/imx6qdl-icore.dtsi
@@ -118,6 +118,7 @@
 };
 
 &usdhc1 {
+       u-boot,dm-spl;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc1>;
        cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -208,6 +209,7 @@
        };
 
        pinctrl_usdhc1: usdhc1grp {
+               u-boot,dm-spl;
                fsl,pins = <
                        MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
                        MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070

diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
index b13b0b2db88163eec89f9b4fb4c5b241b41577c9..e04b57089a64ce3ee29bba3d8bce76d206085d3e 100644 (file)
--- a/arch/arm/dts/imx6qdl.dtsi
+++ b/arch/arm/dts/imx6qdl.dtsi
@@ -77,6 +77,7 @@
                compatible = "simple-bus";
                interrupt-parent = <&gpc>;
                ranges;
+               u-boot,dm-spl;
 
                dma_apbh: dma-apbh@00110000 {
                        compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
@@ -225,6 +226,7 @@
                        #size-cells = <1>;
                        reg = <0x02000000 0x100000>;
                        ranges;
+                       u-boot,dm-spl;
 
                        spba-bus@02000000 {
                                compatible = "fsl,spba-bus", "simple-bus";
@@ -516,6 +518,7 @@
                                #gpio-cells = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
+                               u-boot,dm-spl;
                        };
 
                        gpio2: gpio@020a0000 {
@@ -805,6 +808,7 @@
                        iomuxc: iomuxc@020e0000 {
                                compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
                                reg = <0x020e0000 0x4000>;
+                               u-boot,dm-spl;
                        };
 
                        ldb: ldb@020e0008 {
@@ -889,6 +893,7 @@
                        #size-cells = <1>;
                        reg = <0x02100000 0x100000>;
                        ranges;
+                       u-boot,dm-spl;
 
                        crypto: caam@2100000 {
                                compatible = "fsl,sec-v4.0";

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 6f5a92a2be87fb2e04539f00688a94b4f0754dd7..b78ebc1e04de6eb776dc30b52b7e4a58eddfdd36 100644 (file)
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -219,6 +219,10 @@ config TARGET_MX6Q_ICORE
        select DM_THERMAL
        select SUPPORT_SPL
        select SPL_LOAD_FIT
+       select SPL_DM if SPL
+       select SPL_OF_CONTROL if SPL
+       select SPL_SEPARATE_BSS if SPL
+       select SPL_PINCTRL if SPL
 
 config TARGET_MX6Q_ICORE_RQS
        bool "Support Engicam i.Core RQS"
@@ -234,6 +238,10 @@ config TARGET_MX6Q_ICORE_RQS
        select DM_THERMAL
        select SUPPORT_SPL
        select SPL_LOAD_FIT
+       select SPL_DM if SPL
+       select SPL_OF_CONTROL if SPL
+       select SPL_SEPARATE_BSS if SPL
+       select SPL_PINCTRL if SPL
 
 config TARGET_MX6SABREAUTO
        bool "mx6sabreauto"

diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c
index e173124fa181cc6a05061ff477b7206f03ec7dec..a967ccd0a761ff2767d975682a219b5422eff113 100644 (file)
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/icorem6/icorem6.c
@@ -7,7 +7,6 @@
  */
 
 #include <common.h>
-#include <mmc.h>
 
 #include <asm/io.h>
 #include <asm/gpio.h>
@@ -191,77 +190,3 @@ void setup_display(void)
        writel(reg, &iomux->gpr[3]);
 }
 #endif /* CONFIG_VIDEO_IPUV3 */
-
-#ifdef CONFIG_SPL_BUILD
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |             \
-       PAD_CTL_PUS_22K_UP  | PAD_CTL_SPEED_LOW |               \
-       PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc1_pads[] = {
-       IOMUX_PADS(PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL)),/* CD */
-};
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1)
-
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
-       {USDHC1_BASE_ADDR, 0, 4},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-       struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-       int ret = 0;
-
-       switch (cfg->esdhc_base) {
-       case USDHC1_BASE_ADDR:
-               ret = !gpio_get_value(USDHC1_CD_GPIO);
-               break;
-       }
-
-       return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-       int i, ret;
-
-       /*
-       * According to the board_mmc_init() the following map is done:
-       * (U-boot device node)    (Physical Port)
-       * mmc0                          USDHC1
-       */
-       for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
-               switch (i) {
-               case 0:
-                       SETUP_IOMUX_PADS(usdhc1_pads);
-                       gpio_direction_input(USDHC1_CD_GPIO);
-                       usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-                       break;
-               default:
-                       printf("Warning - USDHC%d controller not supporting\n",
-                              i + 1);
-                       return 0;
-               }
-
-               ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
-               if (ret) {
-                       printf("Warning: failed to initialize mmc dev %d\n", i);
-                       return ret;
-               }
-       }
-
-       return 0;
-}
-#endif
-#endif /* CONFIG_SPL_BUILD */

diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c
index 84ab936d0f4d4a94ad03c9b5d75f0a6cee537226..cd73dfa9babbe6c02c540655653f46b0aedc8824 100644 (file)
--- a/board/engicam/icorem6_rqs/icorem6_rqs.c
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -6,21 +6,7 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <linux/sizes.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/iomux-v3.h>
-
-#include "../common/board.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -34,93 +20,6 @@ int board_mmc_get_env_dev(int devno)
 #ifdef CONFIG_SPL_BUILD
 #include <spl.h>
 
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |             \
-       PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_HIGH |               \
-       PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
-       IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
-       IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-       IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-struct fsl_esdhc_cfg usdhc_cfg[2] = {
-       {USDHC3_BASE_ADDR, 1, 4},
-       {USDHC4_BASE_ADDR, 1, 8},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-       struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-       int ret = 0;
-
-       switch (cfg->esdhc_base) {
-       case USDHC3_BASE_ADDR:
-       case USDHC4_BASE_ADDR:
-               ret = 1;
-               break;
-       }
-
-       return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-       int i, ret;
-
-       /*
-       * According to the board_mmc_init() the following map is done:
-       * (U-boot device node)    (Physical Port)
-       * mmc0                  USDHC3
-       * mmc1                  USDHC4
-       */
-       for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
-               switch (i) {
-               case 0:
-                       SETUP_IOMUX_PADS(usdhc3_pads);
-                       usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-                       break;
-               case 1:
-                       SETUP_IOMUX_PADS(usdhc4_pads);
-                       usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-                       break;
-               default:
-                       printf("Warning - USDHC%d controller not supporting\n",
-                              i + 1);
-                       return 0;
-               }
-
-               ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
-               if (ret) {
-                       printf("Warning: failed to initialize mmc dev %d\n", i);
-                       return ret;
-               }
-       }
-
-       return 0;
-}
-
 #ifdef CONFIG_ENV_IS_IN_MMC
 void board_boot_order(u32 *spl_boot_list)
 {
@@ -146,5 +45,4 @@ void board_boot_order(u32 *spl_boot_list)
        spl_boot_list[0] = boot_dev;
 }
 #endif
-#endif
 #endif /* CONFIG_SPL_BUILD */

diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index 6e93c49b5c16fa872fd9bc075a0280090d6abba9..31cf1e6184dd940e1204882e395ebb4c5d4ed18a 100644 (file)
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -48,3 +48,4 @@ CONFIG_MXC_UART=y
 CONFIG_IMX_THERMAL=y
 CONFIG_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000

diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig
index fbe96512c6d1d921052c8568e64de589ad840582..1e57debf48065c3bb3960d15afc982820488ed09 100644 (file)
--- a/configs/imx6qdl_icore_rqs_defconfig
+++ b/configs/imx6qdl_icore_rqs_defconfig
@@ -40,3 +40,4 @@ CONFIG_FEC_MXC=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
 CONFIG_MXC_UART=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000

diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 86c1d385cff5770700e997c9bb1f30932aef2970..b88afd7ec604f051da91bfcf890ff1470c64adfa 100644 (file)
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -216,16 +216,18 @@
 
 # include "imx6_spl.h"
 # ifdef CONFIG_SPL_BUILD
-#  if defined(CONFIG_TARGET_MX6Q_ICORE_RQS) || defined(CONFIG_TARGET_MX6UL_ISIOT)
-#   define CONFIG_SYS_FSL_USDHC_NUM    2
-#  else
-#   define CONFIG_SYS_FSL_USDHC_NUM    1
-#  endif
-
-#  define CONFIG_SYS_FSL_ESDHC_ADDR    0
-#  undef CONFIG_DM_GPIO
-#  undef CONFIG_DM_MMC
-# endif
+#  if defined(CONFIG_IMX6UL)
+#   if defined(CONFIG_TARGET_MX6UL_ISIOT)
+#    define CONFIG_SYS_FSL_USDHC_NUM   2
+#   else
+#    define CONFIG_SYS_FSL_USDHC_NUM   1
+#   endif
+
+#   define CONFIG_SYS_FSL_ESDHC_ADDR   0
+#   undef CONFIG_DM_GPIO
+#   undef CONFIG_DM_MMC
+#  endif /* CONFIG_IMX6UL */
+# endif /* CONFIG_SPL_BUILD */
 #endif
 
 #endif /* __IMX6_ENGICAM_CONFIG_H */