Specifies that QE/FMAN firmware is located on the primary SD/MMC
device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device.
-- CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH
- Specifies that QE/FMAN firmware is located on the primary SPI
- device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device.
-
- CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
Specifies that QE/FMAN firmware is located in the remote (master)
memory space. CONFIG_SYS_FMAN_FW_ADDR is a virtual address which
- CONFIG_FSL_MC_ENET
Enable the MC driver for Layerscape SoCs.
-- CONFIG_SYS_LS_MC_FW_ADDR
- The address in the storage device where the firmware is located. The
- meaning of this address depends on which CONFIG_SYS_LS_MC_FW_IN_xxx macro
- is also specified.
-
-- CONFIG_SYS_LS_MC_FW_LENGTH
- The maximum possible size of the firmware. The firmware binary format
- has a field that specifies the actual size of the firmware, but it
- might not be possible to read any part of the firmware unless some
- local storage is allocated to hold the entire firmware first.
-
-- CONFIG_SYS_LS_MC_FW_IN_NOR
- Specifies that MC firmware is located in NOR flash, mapped as
- normal addressable memory via the LBC. CONFIG_SYS_LS_MC_FW_ADDR is the
- virtual address in NOR flash.
-
Freescale Layerscape Debug Server Support:
-------------------------------------------
The Freescale Layerscape Debug Server Support supports the loading of
#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580C00000ULL
/* MC firmware */
-#define CONFIG_SYS_LS_MC_FW_IN_NOR
-#define CONFIG_SYS_LS_MC_FW_ADDR 0x580200000ULL
-
#define CONFIG_SYS_LS_MC_DPL_IN_NOR
#define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL