]> git.sur5r.net Git - u-boot/commitdiff
mpc512x: MPC5121ADS: Add NAND support
authorStefan Roese <sr@denx.de>
Tue, 9 Jun 2009 14:57:47 +0000 (16:57 +0200)
committerWolfgang Denk <wd@denx.de>
Fri, 12 Jun 2009 18:47:19 +0000 (20:47 +0200)
This patch adds NAND support to the MPC5121ADS board. Please
note that the image size increased since NAND support didn't
fit in the current image size (256k).

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
board/freescale/mpc5121ads/mpc5121ads.c
include/configs/mpc5121ads.h

index 102e6ff8be98be935978e29221d2f04cc1f50c2f..ec74fd35d2d24d655ae7b84fc30609a0d8d11165 100644 (file)
@@ -31,6 +31,9 @@
 #include <i2c.h>
 #endif
 
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
 extern int mpc5121_diu_init(void);
@@ -38,24 +41,48 @@ extern void ide_set_reset(int idereset);
 
 /* Clocks in use */
 #define SCCR1_CLOCKS_EN        (CLOCK_SCCR1_CFG_EN |                           \
-                        CLOCK_SCCR1_LPC_EN |                           \
-                        CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |       \
-                        CLOCK_SCCR1_PSCFIFO_EN |                       \
                         CLOCK_SCCR1_DDR_EN |                           \
                         CLOCK_SCCR1_FEC_EN |                           \
+                        CLOCK_SCCR1_LPC_EN |                           \
+                        CLOCK_SCCR1_NFC_EN |                           \
                         CLOCK_SCCR1_PATA_EN |                          \
                         CLOCK_SCCR1_PCI_EN |                           \
+                        CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |       \
+                        CLOCK_SCCR1_PSCFIFO_EN |                       \
                         CLOCK_SCCR1_TPR_EN)
 
-#define SCCR2_CLOCKS_EN        (CLOCK_SCCR2_MEM_EN |           \
-                        CLOCK_SCCR2_SPDIF_EN |         \
-                        CLOCK_SCCR2_DIU_EN |           \
-                        CLOCK_SCCR2_I2C_EN)
+#define SCCR2_CLOCKS_EN        (CLOCK_SCCR2_DIU_EN |           \
+                        CLOCK_SCCR2_I2C_EN |           \
+                        CLOCK_SCCR2_MEM_EN |           \
+                        CLOCK_SCCR2_SPDIF_EN)
 
 #define CSAW_START(start)      ((start) & 0xFFFF0000)
 #define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16)
 
 long int fixed_sdram(void);
+void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip);
+
+/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */
+extern int mpc5121_nfc_chip;
+
+/* Control chips select signal on MPC5121ADS board */
+void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+       unsigned char *csreg = (u8 *)CONFIG_SYS_CPLD_BASE + 0x09;
+       u8 v;
+
+       v = in_8(csreg);
+       v |= 0x0F;
+
+       if (chip >= 0) {
+               __mpc5121_nfc_select_chip(mtd, 0);
+               v &= ~(1 << mpc5121_nfc_chip);
+       } else {
+               __mpc5121_nfc_select_chip(mtd, -1);
+       }
+
+       out_8(csreg, v);
+}
 
 int board_early_init_f (void)
 {
index dff7f1a4f12ce42a66c0a5c3305ab4ce9bd3b607..45a004eb2c2e72d440fa6d95f3892b0ec3bfaea3 100644 (file)
 
 #undef CONFIG_SYS_FLASH_CHECKSUM
 
+/*
+ * NAND FLASH
+ * drivers/mtd/nand/mpc5121_mpc.c (rev 2 silicon only)
+ */
+#define CONFIG_CMD_NAND
+#define CONFIG_NAND_MPC5121_NFC
+#define CONFIG_SYS_NAND_BASE            0x40000000
+
+#define CONFIG_SYS_MAX_NAND_DEVICE      2
+#define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_NAND_SELECT_DEVICE  /* driver supports mutipl. chips */
+
+/*
+ * Configuration parameters for MPC5121 NAND driver
+ */
+#define CONFIG_FSL_NFC_WIDTH 1
+#define CONFIG_FSL_NFC_WRITE_SIZE 2048
+#define CONFIG_FSL_NFC_SPARE_SIZE 64
+#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
+
 /*
  * CPLD registers area is really only 32 bytes in size, but the smallest possible LP
  * window is 64KB
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE        TEXT_BASE               /* Start of monitor */
-#define CONFIG_SYS_MONITOR_LEN         (256 * 1024)            /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)            /* Reserve 512 kB for Mon */
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_MALLOC_LEN          (6 * 1024 * 1024)       /* Reserved for malloc */
 #else