]> git.sur5r.net Git - u-boot/commitdiff
AX88180: add support for the Marvell 88E1118 phy
authorHoan Hoang <hnhoan@i-syst.com>
Tue, 11 May 2010 06:42:38 +0000 (02:42 -0400)
committerBen Warren <biggerbadderben@gmail.com>
Mon, 12 Jul 2010 07:14:29 +0000 (00:14 -0700)
Some places in the current code equate the Marvell 88E1111 PHY as the family
when in reality it's a subpart of the Alaska family.  So once we generalize
that, add support for the 88E1118 PHY.

Signed-off-by: Hoan Hoang <hnhoan@i-syst.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
drivers/net/ax88180.c
drivers/net/ax88180.h

index fa2e212bb87b49a4c59222e51872124bb82a1849..bc3e6ad58a0ff0e58080ff675b839353bbdc5f65 100644 (file)
@@ -267,20 +267,35 @@ static int ax88180_phy_initial (struct eth_device *dev)
        {
                priv->PhyAddr = phyaddr;
                priv->PhyID0 = ax88180_mdio_read(dev, MII_PHYSID1);
+               priv->PhyID1 = ax88180_mdio_read(dev, MII_PHYSID2);
 
                switch (priv->PhyID0) {
-               case MARVELL_88E1111_PHYSID0:
-                       debug("ax88180: Found Marvell 88E1111 PHY."
+               case MARVELL_ALASKA_PHYSID0:
+                       debug("ax88180: Found Marvell Alaska PHY family."
                              " (PHY Addr=0x%x)\n", priv->PhyAddr);
 
-                       tmp_regval = ax88180_mdio_read(dev, M88_EXT_SSR);
-                       if ((tmp_regval & HWCFG_MODE_MASK) != RGMII_COPPER_MODE) {
-                               ax88180_mdio_write(dev, M88_EXT_SCR, DEFAULT_EXT_SCR);
-                               if (ax88180_phy_reset(dev) < 0)
-                                       return 0;
-                               ax88180_mdio_write(dev, M88_IER, LINK_CHANGE_INT);
+                       switch (priv->PhyID1) {
+                       case MARVELL_88E1118_PHYSID1:
+                               ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 2);
+                               ax88180_mdio_write(dev, M88E1118_CR,
+                                       M88E1118_CR_DEFAULT);
+                               ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 3);
+                               ax88180_mdio_write(dev, M88E1118_LEDCTL,
+                                       M88E1118_LEDCTL_DEFAULT);
+                               ax88180_mdio_write(dev, M88E1118_LEDMIX,
+                                       M88E1118_LEDMIX_LED050 | M88E1118_LEDMIX_LED150 | 0x15);
+                               ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 0);
+                       default: /* Default to 88E1111 Phy */
+                               tmp_regval = ax88180_mdio_read(dev, M88E1111_EXT_SSR);
+                               if ((tmp_regval & HWCFG_MODE_MASK) != RGMII_COPPER_MODE)
+                                       ax88180_mdio_write(dev, M88E1111_EXT_SCR,
+                                               DEFAULT_EXT_SCR);
                        }
 
+                       if (ax88180_phy_reset(dev) < 0)
+                               return 0;
+                       ax88180_mdio_write(dev, M88_IER, LINK_CHANGE_INT);
+
                        return 1;
 
                case CICADA_CIS8201_PHYSID0:
@@ -358,7 +373,7 @@ static void ax88180_media_config (struct eth_device *dev)
 
                /* Get real media mode here */
                switch (priv->PhyID0) {
-               case MARVELL_88E1111_PHYSID0:
+               case MARVELL_ALASKA_PHYSID0:
                        RealMediaMode = get_MarvellPHY_media_mode(dev);
                        break;
                case CICADA_CIS8201_PHYSID0:
index c793e92dbd4425d9375e7441686b46f940eb6371..f26a91bf8c1787136a55c26ebbe5e585f24a4312 100644 (file)
@@ -33,6 +33,7 @@ struct ax88180_private {
        unsigned char PadSize;
        unsigned short PhyAddr;
        unsigned short PhyID0;
+       unsigned short PhyID1;
        unsigned short FirstTxDesc;
        unsigned short NextTxDesc;
        ax88180_link_state LinkState;
@@ -63,7 +64,8 @@ struct ax88180_private {
 /* Max Rx Jumbo size is 15K Bytes */
 #define MAX_RX_SIZE                    0x3C00
 
-#define MARVELL_88E1111_PHYSID0        0x0141
+#define MARVELL_ALASKA_PHYSID0 0x141
+#define MARVELL_88E1118_PHYSID1        0xE40
 
 #define CICADA_CIS8201_PHYSID0         0x000F
 
@@ -296,14 +298,36 @@ struct ax88180_private {
   #define LINK_CHANGE_INT      0x0400
 #define M88_ISR                0x0013
   #define LINK_CHANGE_STATUS   0x0400
-#define M88_EXT_SCR    0x0014
+#define M88E1111_EXT_SCR       0x0014
   #define RGMII_RXCLK_DELAY    0x0080
   #define RGMII_TXCLK_DELAY    0x0002
   #define DEFAULT_EXT_SCR      (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY)
-#define M88_EXT_SSR    0x001B
+#define M88E1111_EXT_SSR       0x001B
   #define HWCFG_MODE_MASK      0x000F
   #define RGMII_COPPER_MODE    0x000B
 
+/* Marvell 88E1118 Gigabit PHY Register Definition */
+#define M88E1118_CR                    0x14
+  #define M88E1118_CR_RGMII_RXCLK_DELAY        0x0020
+  #define M88E1118_CR_RGMII_TXCLK_DELAY        0x0010
+  #define M88E1118_CR_DEFAULT          (M88E1118_CR_RGMII_TXCLK_DELAY | \
+                                        M88E1118_CR_RGMII_RXCLK_DELAY)
+#define M88E1118_LEDCTL                0x10            /* Reg 16 on page 3 */
+  #define M88E1118_LEDCTL_LED2INT                      0x200
+  #define M88E1118_LEDCTL_LED2BLNK                     0x400
+  #define M88E1118_LEDCTL_LED0DUALMODE1        0xc
+  #define M88E1118_LEDCTL_LED0DUALMODE2        0xd
+  #define M88E1118_LEDCTL_LED0DUALMODE3        0xe
+  #define M88E1118_LEDCTL_LED0DUALMODE4        0xf
+  #define M88E1118_LEDCTL_DEFAULT      (M88E1118_LEDCTL_LED2BLNK | \
+                                        M88E1118_LEDCTL_LED0DUALMODE4)
+
+#define M88E1118_LEDMIX                0x11            /* Reg 17 on page 3 */
+  #define M88E1118_LEDMIX_LED050                               0x4
+  #define M88E1118_LEDMIX_LED150                               0x8
+
+#define M88E1118_PAGE_SEL      0x16            /* Reg page select */
+
 /* CICADA CIS8201 Gigabit PHY Register Definition */
 #define CIS_IMR                0x0019
   #define CIS_INT_ENABLE       0x8000