M: Stefan Roese <sr@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-cfi-flash.git
-F: drivers/mtd/*
+F: drivers/mtd/cfi_flash.c
+F: drivers/mtd/jedec_flash.c
COLDFIRE
M: Jason Jin <jason.jin@freescale.com>
-#
-# (C) Copyright 2000-2013
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-VERSION = 2014
-PATCHLEVEL = 10
+VERSION = 2015
+PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
NAME =
# *DOCUMENTATION*
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
-# Do not:
-# o use make's built-in rules and variables
-# (this increases performance and avoids hard-to-debug behaviour);
-# o print "Entering directory ...";
-MAKEFLAGS += -rR --no-print-directory
+# Do not use make's built-in rules and variables
+# (this increases performance and avoids hard-to-debug behaviour);
+MAKEFLAGS += -rR
# Avoid funny character set dependencies
unexport LC_ALL
LC_NUMERIC=C
export LC_COLLATE LC_NUMERIC
+# Avoid interference with shell env settings
+unexport GREP_OPTIONS
+
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
#
# descending is started. They are now explicitly listed as the
# prepare rule.
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+# $(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+#
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
KBUILD_VERBOSE = 0
endif
-# Call a source code checker (by default, "sparse") as part of the
-# C compilation.
-#
-# Use 'make C=1' to enable checking of only re-compiled files.
-# Use 'make C=2' to enable checking of *all* source files, regardless
-# of whether they are re-compiled or not.
-#
-# See the file "Documentation/sparse.txt" for more details, including
-# where to get the "sparse" utility.
+ifeq ($(KBUILD_VERBOSE),1)
+ quiet =
+ Q =
+else
+ quiet=quiet_
+ Q = @
+endif
-ifeq ("$(origin C)", "command line")
- KBUILD_CHECKSRC = $(C)
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+ quiet=silent_
endif
-ifndef KBUILD_CHECKSRC
- KBUILD_CHECKSRC = 0
+else # make-3.8x
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+ quiet=silent_
endif
-
-# Use make M=dir to specify directory of external module to build
-# Old syntax make ... SUBDIRS=$PWD is still supported
-# Setting the environment variable KBUILD_EXTMOD take precedence
-ifdef SUBDIRS
- KBUILD_EXTMOD ?= $(SUBDIRS)
endif
-ifeq ("$(origin M)", "command line")
- KBUILD_EXTMOD := $(M)
-endif
+export quiet Q KBUILD_VERBOSE
# kbuild supports saving output files in a separate directory.
# To locate output files in a separate directory two syntaxes are supported.
# The O= assignment takes precedence over the KBUILD_OUTPUT environment
# variable.
-
# KBUILD_SRC is set on invocation of make in OBJ directory
# KBUILD_SRC is not intended to be used by the regular user (for now)
ifeq ($(KBUILD_SRC),)
@:
sub-make: FORCE
- $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
- KBUILD_SRC=$(CURDIR) \
- KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
- $(filter-out _all sub-make,$(MAKECMDGOALS))
+ $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
+ -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
# Leave processing to above invocation of make
skip-makefile := 1
# We process the rest of the Makefile if this is the final invocation of make
ifeq ($(skip-makefile),)
+# Do not print "Entering directory ...",
+# but we want to display it when entering to the output directory
+# so that IDEs/editors are able to understand relative filenames.
+MAKEFLAGS += --no-print-directory
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+ KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+ KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+ KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+ KBUILD_EXTMOD := $(M)
+endif
+
# If building an external module we do not care about the all: rule
# but instead _all depend on modules
PHONY += all
_all: modules
endif
-srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-objtree := $(CURDIR)
+ifeq ($(KBUILD_SRC),)
+ # building in the source tree
+ srctree := .
+else
+ ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
+ # building in a subdirectory of the source tree
+ srctree := ..
+ else
+ srctree := $(KBUILD_SRC)
+ endif
+endif
+objtree := .
src := $(srctree)
obj := $(objtree)
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
-# Beautify output
-# ---------------------------------------------------------------------------
-#
-# Normally, we echo the whole command before executing it. By making
-# that echo $($(quiet)$(cmd)), we now have the possibility to set
-# $(quiet) to choose other forms of output instead, e.g.
-#
-# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
-# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
-#
-# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing will be printed at all, since
-# the variable $(silent_cmd_cc_o_c) doesn't exist.
-#
-# A simple variant is to prefix commands with $(Q) - that's useful
-# for commands that shall be hidden in non-verbose mode.
-#
-# $(Q)ln $@ :<
-#
-# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
-# If KBUILD_VERBOSE equals 1 then the above command is displayed.
-
-ifeq ($(KBUILD_VERBOSE),1)
- quiet =
- Q =
-else
- quiet=quiet_
- Q = @
-endif
-
-# If the user is running make -s (silent mode), suppress echoing of
-# commands
-
-ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
-ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
- quiet=silent_
-endif
-else # make-3.8x
-ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
- quiet=silent_
-endif
-endif
-
-export quiet Q KBUILD_VERBOSE
-
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
all: $(ALL-y)
+ifneq ($(CONFIG_SYS_GENERIC_BOARD),y)
+ @echo "===================== WARNING ======================"
+ @echo "Please convert this board to generic board."
+ @echo "Otherwise it will be removed by the end of 2014."
+ @echo "See doc/README.generic-board for further information"
+ @echo "===================================================="
+endif
PHONY += dtbs
dtbs dts/dt.dtb: checkdtc u-boot
u-boot.ldr: u-boot
$(CREATE_LDR_ENV)
- $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
+ $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
$(BOARD_SIZE_CHECK)
OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
# make distclean Remove editor backup files, patch leftover files and the like
# Directories & files removed with 'make clean'
-CLEAN_DIRS += $(MODVERDIR)
-CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h
-
-# Directories & files removed with 'make clobber'
-CLOBBER_DIRS += $(foreach d, spl tpl, $(patsubst %,$d/%, \
+CLEAN_DIRS += $(MODVERDIR) \
+ $(foreach d, spl tpl, $(patsubst %,$d/%, \
$(filter-out include, $(shell ls -1 $d 2>/dev/null))))
-CLOBBER_FILES += u-boot* MLO* SPL System.map
+
+CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
+ u-boot* MLO* SPL System.map
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include/generated spl tpl \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
-o -name '*.gcno' \) -type f -print | xargs rm -f
-# clobber
-#
-clobber: rm-dirs := $(CLOBBER_DIRS)
-clobber: rm-files := $(CLOBBER_FILES)
-
-PHONY += clobber
-
-clobber: clean
- $(call cmd,rmdirs)
- $(call cmd,rmfiles)
-
# mrproper - Delete all generated files, including .config
#
mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
$(mrproper-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
-mrproper: clobber $(mrproper-dirs)
+mrproper: clean $(mrproper-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@rm -f arch/*/include/asm/arch
help:
@echo 'Cleaning targets:'
- @echo ' clean - Remove most generated files but keep the config and'
- @echo ' necessities for testing u-boot'
- @echo ' clobber - Remove most generated files but keep the config'
+ @echo ' clean - Remove most generated files but keep the config'
@echo ' mrproper - Remove all generated files + config + various backup files'
@echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
@echo ''
@echo 'Other generic targets:'
@echo ' all - Build all necessary images depending on configuration'
- @echo ' u-boot - Build the bare u-boot'
+ @echo '* u-boot - Build the bare u-boot'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[oisS] - Build specified target only'
@echo ' dir/file.lst - Build specified mixed source/assembly target only'
@echo ' tags/ctags - Generate ctags file for editors'
@echo ' etags - Generate etags file for editors'
@echo ' cscope - Generate cscope index'
- @echo ' ubootrelease - Output the release version string'
- @echo ' ubootversion - Output the version stored in Makefile'
+ @echo ' ubootrelease - Output the release version string (use with make -s)'
+ @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
@echo ''
@echo 'Static analysers'
@echo ' checkstack - Generate a list of stack hogs'
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+clean := -f $(srctree)/scripts/Makefile.clean obj
endif # skip-makefile
make O=/tmp/build NAME_defconfig
make O=/tmp/build all
-2. Set environment variable BUILD_DIR to point to the desired location:
+2. Set environment variable KBUILD_OUTPUT to point to the desired location:
- export BUILD_DIR=/tmp/build
+ export KBUILD_OUTPUT=/tmp/build
make distclean
make NAME_defconfig
make all
-Note that the command line "O=" setting overrides the BUILD_DIR environment
+Note that the command line "O=" setting overrides the KBUILD_OUTPUT environment
variable.
default "armv7" if CPU_V7
default "pxa" if CPU_PXA
default "sa1100" if CPU_SA1100
+ default "armv8" if ARM64
choice
prompt "Target select"
config TARGET_DB_MV784MP_GP
bool "Support db-mv784mp-gp"
+ select CPU_V7
config TARGET_MAXBCM
bool "Support maxbcm"
+ select CPU_V7
config TARGET_DEVKIT3250
bool "Support devkit3250"
config TARGET_MX6SABRESD
bool "Support mx6sabresd"
select CPU_V7
+ select SUPPORT_SPL
config TARGET_MX6SLEVK
bool "Support mx6slevk"
config TARGET_KOSAGI_NOVENA
bool "Support Kosagi Novena"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config TARGET_TBS2910
+ bool "Support tbs2910"
config TARGET_TQMA6
bool "TQ Systems TQMa6 board"
endchoice
-source "arch/arm/cpu/armv8/Kconfig"
-
source "arch/arm/cpu/arm926ejs/davinci/Kconfig"
source "arch/arm/cpu/armv7/exynos/Kconfig"
source "board/syteco/jadecpu/Kconfig"
source "board/syteco/zmx25/Kconfig"
source "board/taskit/stamp9g20/Kconfig"
+source "board/tbs/tbs2910/Kconfig"
source "board/ti/am335x/Kconfig"
source "board/ti/am43xx/Kconfig"
source "board/ti/ti814x/Kconfig"
source "board/xaeniax/Kconfig"
source "board/zipitz2/Kconfig"
+source "arch/arm/Kconfig.debug"
+
endmenu
--- /dev/null
+menu "ARM debug"
+
+config DEBUG_LL
+ bool "Low-level debugging functions"
+ depends on !ARM64
+ help
+ Say Y here to include definitions of printascii, printch, printhex
+ in U-Boot. This is helpful if you are debugging code that
+ executes before the console is initialized.
+
+choice
+ prompt "Low-level debugging port"
+ depends on DEBUG_LL
+
+ config DEBUG_LL_UART_8250
+ bool "Low-level debugging via 8250 UART"
+ help
+ Say Y here if you wish the debug print routes to direct
+ their output to an 8250 UART. You can use this option
+ to provide the parameters for the 8250 UART rather than
+ selecting one of the platform specific options above if
+ you know the parameters for the port.
+
+ This option is preferred over the platform specific
+ options; the platform specific options are deprecated
+ and will be soon removed.
+
+endchoice
+
+config DEBUG_LL_INCLUDE
+ string
+ depends on DEBUG_LL
+ default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ default "mach/debug-macro.S"
+
+# Compatibility options for 8250
+config DEBUG_UART_8250
+ bool
+
+config DEBUG_UART_PHYS
+ hex "Physical base address of debug UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+
+# This is not used in U-Boot
+config DEBUG_UART_VIRT
+ hex
+ default DEBUG_UART_PHYS
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+
+config DEBUG_UART_8250_SHIFT
+ int "Register offset shift for the 8250 debug UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ default 2
+
+config DEBUG_UART_8250_WORD
+ bool "Use 32-bit accesses for 8250 UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ depends on DEBUG_UART_8250_SHIFT >= 2
+
+config DEBUG_UART_8250_FLOW_CONTROL
+ bool "Enable flow control for 8250 UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+
+endmenu
int i;
for (i = 0; i < 8; i++) {
+ /* cppcheck-suppress nullPointer */
vt[i] = ldr_pc;
+ /* cppcheck-suppress nullPointer */
vt[i + 8] = start_addr + (4 * i);
}
}
* fine.
*/
extern uint32_t _start;
+
+ /* cppcheck-suppress nullPointer */
memcpy(0x0, &_start, 0x60);
}
TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET;
#elif defined(CONFIG_MX28)
now = readl(&timrot_regs->hw_timrot_running_count0);
+#else
+#error "Don't know how to read timrot_regs"
#endif
if (lastdec >= now) {
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-extra-y = start.o
-obj-y = cpu.o
+++ /dev/null
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -march=armv4
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * CPU specific code for an unknown cpu
- * - hence fairly empty......
- */
-
-#include <common.h>
-#include <command.h>
-
-int cleanup_before_linux (void)
-{
- /*
- * this function is called just before we call linux
- * it prepares the processor for linux
- *
- * we turn off caches etc ...
- */
-
- disable_interrupts ();
-
- /* Since the CM has unknown processor we do not support
- * cache operations
- */
-
- return (0);
-}
+++ /dev/null
-/*
- * armboot - Startup Code for ARM926EJS CPU-core
- *
- * Copyright (c) 2003 Texas Instruments
- *
- * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
- *
- * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
- * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
- * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
- * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
- * Copyright (c) 2003 Kshitij <kshitij@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <version.h>
-
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * setup memory and board specific bits prior to relocation.
- * relocate armboot to ram
- * setup stack
- *
- *************************************************************************
- */
-
- .globl reset
-
-reset:
- /*
- * set the cpu to SVC32 mode
- */
- mrs r0,cpsr
- bic r0,r0,#0x1f
- orr r0,r0,#0xd3
- msr cpsr,r0
-
- /*
- * we do sys-critical inits only at reboot,
- * not when booting from ram!
- */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
- bl cpu_init_crit
-#endif
-
- bl _main
-
-/*------------------------------------------------------------------------------*/
-
- .globl c_runtime_cpu_setup
-c_runtime_cpu_setup:
-
- mov pc, lr
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-cpu_init_crit:
- /* arm_int_generic assumes the ARM boot monitor, or user software,
- * has initialized the platform
- */
- mov pc, lr /* back to my caller */
-#endif
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <power/tps65910.h>
+#include <linux/compiler.h>
struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE;
/**
* get_board_rev() - setup to pass kernel board revision information
- * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
+ * returns: 0 for the ATAG REVISION tag value.
*/
-u32 get_board_rev(void)
+u32 __weak get_board_rev(void)
{
- return BOARD_REV_ID;
+ return 0;
}
/**
* to get size details from Current Cache Size ID Register(CCSIDR)
*/
static void set_csselr(u32 level, u32 type)
-{ u32 csselr = level << 1 | type;
+{
+ u32 csselr = level << 1 | type;
/* Write to Cache Size Selection Register(CSSELR) */
asm volatile ("mcr p15, 2, %0, c0, c0, 0" : : "r" (csselr));
u32 num_ways, u32 way_shift,
u32 log2_line_len)
{
- int way, set, setway;
+ int way, set;
+ u32 setway;
/*
* For optimal assembly code:
u32 num_ways, u32 way_shift,
u32 log2_line_len)
{
- int way, set, setway;
+ int way, set;
+ u32 setway;
/*
* For optimal assembly code:
static void v7_maint_dcache_all(u32 operation)
{
u32 level, cache_type, level_start_bit = 0;
-
u32 clidr = get_clidr();
for (level = 0; level < 7; level++) {
}
}
-static void v7_dcache_clean_inval_range(u32 start,
- u32 stop, u32 line_len)
+static void v7_dcache_clean_inval_range(u32 start, u32 stop, u32 line_len)
{
u32 mva;
*/
void invalidate_dcache_range(unsigned long start, unsigned long stop)
{
-
v7_dcache_maint_range(start, stop, ARMV7_DCACHE_INVAL_RANGE);
v7_outer_cache_inval_range(start, stop);
/*
* cfg_val will be used for
* Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
- * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0]
- * to SBMR1, which will determine the boot device.
+ * After reset, if GPR10[28] is 1, ROM will use GPR9[25:0]
+ * instead of SBMR1 to determine the boot device.
*/
const struct boot_mode soc_boot_modes[] = {
{"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
bool "CompuLab CM-T3530 and CM-T3730 boards"
select SUPPORT_SPL
+config TARGET_CM_T3517
+ bool "CompuLab CM-T3517 boards"
+
config TARGET_DEVKIT8000
bool "TimLL OMAP3 Devkit8000"
select SUPPORT_SPL
source "board/ti/sdp3430/Kconfig"
source "board/ti/beagle/Kconfig"
source "board/compulab/cm_t35/Kconfig"
+source "board/compulab/cm_t3517/Kconfig"
source "board/timll/devkit8000/Kconfig"
source "board/ti/evm/Kconfig"
source "board/isee/igep00x0/Kconfig"
return clock;
}
+unsigned int cm_get_spi_controller_clk_hz(void)
+{
+ uint32_t reg, clock = 0;
+
+ clock = cm_get_per_vco_clk_hz();
+
+ /* get the clock prior L4 SP divider (periph_base_clk) */
+ reg = readl(&clock_manager_base->per_pll.perbaseclk);
+ clock /= (reg + 1);
+
+ return clock;
+}
+
static void cm_print_clock_quick_summary(void)
{
printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
printf("UART %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
+ printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
}
int set_cpu_clk_info(void)
/* Add device descriptor to FPGA device table */
socfpga_fpga_add();
+
+#ifdef CONFIG_DESIGNWARE_SPI
+ /* Get Designware SPI controller out of reset */
+ socfpga_spim_enable();
+#endif
+
return 0;
}
#endif
}
}
+
+/* SPI Master enable (its held in reset by the preloader) */
+void socfpga_spim_enable(void)
+{
+ const void *reset = &reset_manager_base->per_mod_reset;
+
+ clrbits_le32(reset, 1 << RSTMGR_PERMODRST_SPIM0_LSB);
+ clrbits_le32(reset, 1 << RSTMGR_PERMODRST_SPIM1_LSB);
+}
obj-y += pinmux.o
obj-$(CONFIG_MACH_SUN6I) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += prcm.o
+obj-$(CONFIG_MACH_SUN6I) += p2wi.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
endif
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_MACH_SUN4I) += dram.o
-obj-$(CONFIG_MACH_SUN5I) += dram.o
-obj-$(CONFIG_MACH_SUN7I) += dram.o
+obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o
+obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
+obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o
+obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
ifdef CONFIG_SPL_FEL
obj-y += start.o
endif
/* do some early init */
void s_init(void)
{
+#if defined CONFIG_SPL_BUILD && defined CONFIG_MACH_SUN6I
+ /* Magic (undocmented) value taken from boot0, without this DRAM
+ * access gets messed up (seems cache related) */
+ setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
+#endif
#if !defined CONFIG_SPL_BUILD && (defined CONFIG_MACH_SUN7I || \
defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I)
/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
#include <asm/arch/prcm.h>
#include <asm/arch/sys_proto.h>
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_prcm_reg * const prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+ /* Set PLL ldo voltage without this PLL6 does not work properly */
+ clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
+ PRCM_PLL_CTRL_LDO_KEY);
+ clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
+ PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
+ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
+ clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
+
+ clock_set_pll1(408000000);
+
+ writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
+
+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+
+ writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg);
+ writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg);
+}
+#endif
+
void clock_init_uart(void)
{
struct sunxi_ccm_reg *const ccm =
return 0;
}
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ int k = 1;
+ int m = 1;
+
+ if (clk > 1152000000) {
+ k = 2;
+ } else if (clk > 768000000) {
+ k = 3;
+ m = 2;
+ }
+
+ /* Switch to 24MHz clock while changing PLL1 */
+ writel(AXI_DIV_3 << AXI_DIV_SHIFT |
+ ATB_DIV_2 << ATB_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_axi_cfg);
+
+ /* PLL1 rate = 24000000 * n * k / m */
+ writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_MAGIC |
+ CCM_PLL1_CTRL_N(clk / (24000000 * k / m)) |
+ CCM_PLL1_CTRL_K(k) | CCM_PLL1_CTRL_M(m), &ccm->pll1_cfg);
+ sdelay(200);
+
+ /* Switch CPU to PLL1 */
+ writel(AXI_DIV_3 << AXI_DIV_SHIFT |
+ ATB_DIV_2 << ATB_DIV_SHIFT |
+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_axi_cfg);
+}
+#endif
+
+void clock_set_pll5(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int k = 2;
+ const int m = 1;
+
+ /* PLL5 rate = 24000000 * n * k / m */
+ writel(CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD |
+ CCM_PLL5_CTRL_N(clk / (24000000 * k / m)) |
+ CCM_PLL5_CTRL_K(k) | CCM_PLL5_CTRL_M(m), &ccm->pll5_cfg);
+
+ udelay(5500);
+}
+
unsigned int clock_get_pll6(void)
{
struct sunxi_ccm_reg *const ccm =
+++ /dev/null
-/*
- * sunxi DRAM controller initialization
- * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
- * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
- *
- * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c
- * and earlier U-Boot Allwiner A10 SPL work
- *
- * (C) Copyright 2007-2012
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Berg Xing <bergxing@allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Unfortunately the only documentation we have on the sun7i DRAM
- * controller is Allwinner boot0 + boot1 code, and that code uses
- * magic numbers & shifts with no explanations. Hence this code is
- * rather undocumented and full of magic.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dram.h>
-#include <asm/arch/timer.h>
-#include <asm/arch/sys_proto.h>
-
-#define CPU_CFG_CHIP_VER(n) ((n) << 6)
-#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3)
-#define CPU_CFG_CHIP_REV_A 0x0
-#define CPU_CFG_CHIP_REV_C1 0x1
-#define CPU_CFG_CHIP_REV_C2 0x2
-#define CPU_CFG_CHIP_REV_B 0x3
-
-/*
- * Wait up to 1s for value to be set in given part of reg.
- */
-static void await_completion(u32 *reg, u32 mask, u32 val)
-{
- unsigned long tmo = timer_get_us() + 1000000;
-
- while ((readl(reg) & mask) != val) {
- if (timer_get_us() > tmo)
- panic("Timeout initialising DRAM\n");
- }
-}
-
-/*
- * Wait up to 1s for mask to be clear in given reg.
- */
-static inline void await_bits_clear(u32 *reg, u32 mask)
-{
- await_completion(reg, mask, 0);
-}
-
-/*
- * Wait up to 1s for mask to be set in given reg.
- */
-static inline void await_bits_set(u32 *reg, u32 mask)
-{
- await_completion(reg, mask, mask);
-}
-
-/*
- * This performs the external DRAM reset by driving the RESET pin low and
- * then high again. According to the DDR3 spec, the RESET pin needs to be
- * kept low for at least 200 us.
- */
-static void mctl_ddr3_reset(void)
-{
- struct sunxi_dram_reg *dram =
- (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
-#ifdef CONFIG_MACH_SUN4I
- struct sunxi_timer_reg *timer =
- (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
- u32 reg_val;
-
- writel(0, &timer->cpu_cfg);
- reg_val = readl(&timer->cpu_cfg);
-
- if ((reg_val & CPU_CFG_CHIP_VER_MASK) !=
- CPU_CFG_CHIP_VER(CPU_CFG_CHIP_REV_A)) {
- setbits_le32(&dram->mcr, DRAM_MCR_RESET);
- udelay(200);
- clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
- } else
-#endif
- {
- clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
- udelay(200);
- setbits_le32(&dram->mcr, DRAM_MCR_RESET);
- }
- /* After the RESET pin is de-asserted, the DDR3 spec requires to wait
- * for additional 500 us before driving the CKE pin (Clock Enable)
- * high. The duration of this delay can be configured in the SDR_IDCR
- * (Initialization Delay Configuration Register) and applied
- * automatically by the DRAM controller during the DDR3 initialization
- * step. But SDR_IDCR has limited range on sun4i/sun5i hardware and
- * can't provide sufficient delay at DRAM clock frequencies higher than
- * 524 MHz (while Allwinner A13 supports DRAM clock frequency up to
- * 533 MHz according to the datasheet). Additionally, there is no
- * official documentation for the SDR_IDCR register anywhere, and
- * there is always a chance that we are interpreting it wrong.
- * Better be safe than sorry, so add an explicit delay here. */
- udelay(500);
-}
-
-static void mctl_set_drive(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
-#ifdef CONFIG_MACH_SUN7I
- clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
-#else
- clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3),
-#endif
- DRAM_MCR_MODE_EN(0x3) |
- 0xffc);
-}
-
-static void mctl_itm_disable(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
- clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF);
-}
-
-static void mctl_itm_enable(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
- clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF);
-}
-
-static void mctl_itm_reset(void)
-{
- mctl_itm_disable();
- udelay(1); /* ITM reset needs a bit of delay */
- mctl_itm_enable();
- udelay(1);
-}
-
-static void mctl_enable_dll0(u32 phase)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
- clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
- ((phase >> 16) & 0x3f) << 6);
- clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE);
- udelay(2);
-
- clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE);
- udelay(22);
-
- clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET);
- udelay(22);
-}
-
-/* Get the number of DDR byte lanes */
-static u32 mctl_get_number_of_lanes(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- if ((readl(&dram->dcr) & DRAM_DCR_BUS_WIDTH_MASK) ==
- DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT))
- return 4;
- else
- return 2;
-}
-
-/*
- * Note: This differs from pm/standby in that it checks the bus width
- */
-static void mctl_enable_dllx(u32 phase)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 i, number_of_lanes;
-
- number_of_lanes = mctl_get_number_of_lanes();
-
- for (i = 1; i <= number_of_lanes; i++) {
- clrsetbits_le32(&dram->dllcr[i], 0xf << 14,
- (phase & 0xf) << 14);
- clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET,
- DRAM_DLLCR_DISABLE);
- phase >>= 4;
- }
- udelay(2);
-
- for (i = 1; i <= number_of_lanes; i++)
- clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET |
- DRAM_DLLCR_DISABLE);
- udelay(22);
-
- for (i = 1; i <= number_of_lanes; i++)
- clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE,
- DRAM_DLLCR_NRESET);
- udelay(22);
-}
-
-static u32 hpcr_value[32] = {
-#ifdef CONFIG_MACH_SUN5I
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0x1031, 0x1031, 0x0735, 0x1035,
- 0x1035, 0x0731, 0x1031, 0,
- 0x0301, 0x0301, 0x0301, 0x0301,
- 0x0301, 0x0301, 0x0301, 0
-#endif
-#ifdef CONFIG_MACH_SUN4I
- 0x0301, 0x0301, 0x0301, 0x0301,
- 0x0301, 0x0301, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0x1031, 0x1031, 0x0735, 0x5031,
- 0x1035, 0x0731, 0x1031, 0x0735,
- 0x1035, 0x1031, 0x0731, 0x1035,
- 0x1031, 0x0301, 0x0301, 0x0731
-#endif
-#ifdef CONFIG_MACH_SUN7I
- 0x0301, 0x0301, 0x0301, 0x0301,
- 0x0301, 0x0301, 0x0301, 0x0301,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0x1031, 0x1031, 0x0735, 0x1035,
- 0x1035, 0x0731, 0x1031, 0x0735,
- 0x1035, 0x1031, 0x0731, 0x1035,
- 0x0001, 0x1031, 0, 0x1031
- /* last row differs from boot0 source table
- * 0x1031, 0x0301, 0x0301, 0x0731
- * but boot0 code skips #28 and #30, and sets #29 and #31 to the
- * value from #28 entry (0x1031)
- */
-#endif
-};
-
-static void mctl_configure_hostport(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 i;
-
- for (i = 0; i < 32; i++)
- writel(hpcr_value[i], &dram->hpcr[i]);
-}
-
-static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk)
-{
- u32 reg_val;
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- u32 pll5p_clk, pll6x_clk;
- u32 pll5p_div, pll6x_div;
- u32 pll5p_rate, pll6x_rate;
-
- /* setup DRAM PLL */
- reg_val = readl(&ccm->pll5_cfg);
- reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */
- reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */
- reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */
- reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */
-#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
- /* Old kernels are hardcoded to P=1 (divide by 2) */
- reg_val |= CCM_PLL5_CTRL_P(1);
-#endif
- if (clk >= 540 && clk < 552) {
- /* dram = 540MHz */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
- } else if (clk >= 512 && clk < 528) {
- /* dram = 512MHz */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
- } else if (clk >= 496 && clk < 504) {
- /* dram = 496MHz */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
- } else if (clk >= 468 && clk < 480) {
- /* dram = 468MHz */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
- } else if (clk >= 396 && clk < 408) {
- /* dram = 396MHz */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
- } else {
- /* any other frequency that is a multiple of 24 */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24));
- }
- reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */
- reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */
- writel(reg_val, &ccm->pll5_cfg);
- udelay(5500);
-
- setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK);
-
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
- /* reset GPS */
- clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE);
- setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
- udelay(1);
- clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
-#endif
-
- /* setup MBUS clock */
- if (!mbus_clk)
- mbus_clk = 300;
-
- /* PLL5P and PLL6 are the potential clock sources for MBUS */
- pll6x_clk = clock_get_pll6() / 1000000;
-#ifdef CONFIG_MACH_SUN7I
- pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */
-#endif
- pll5p_clk = clock_get_pll5p() / 1000000;
- pll6x_div = DIV_ROUND_UP(pll6x_clk, mbus_clk);
- pll5p_div = DIV_ROUND_UP(pll5p_clk, mbus_clk);
- pll6x_rate = pll6x_clk / pll6x_div;
- pll5p_rate = pll5p_clk / pll5p_div;
-
- if (pll6x_div <= 16 && pll6x_rate > pll5p_rate) {
- /* use PLL6 as the MBUS clock source */
- reg_val = CCM_MBUS_CTRL_GATE |
- CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
- CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
- CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(pll6x_div));
- } else if (pll5p_div <= 16) {
- /* use PLL5P as the MBUS clock source */
- reg_val = CCM_MBUS_CTRL_GATE |
- CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) |
- CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
- CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(pll5p_div));
- } else {
- panic("Bad mbus_clk\n");
- }
- writel(reg_val, &ccm->mbus_clk_cfg);
-
- /*
- * open DRAMC AHB & DLL register clock
- * close it first
- */
-#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
- clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
-#else
- clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
-#endif
- udelay(22);
-
- /* then open it */
-#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
- setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
-#else
- setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
-#endif
- udelay(22);
-}
-
-/*
- * The data from rslrX and rdgrX registers (X=rank) is stored
- * in a single 32-bit value using the following format:
- * bits [31:26] - DQS gating system latency for byte lane 3
- * bits [25:24] - DQS gating phase select for byte lane 3
- * bits [23:18] - DQS gating system latency for byte lane 2
- * bits [17:16] - DQS gating phase select for byte lane 2
- * bits [15:10] - DQS gating system latency for byte lane 1
- * bits [ 9:8 ] - DQS gating phase select for byte lane 1
- * bits [ 7:2 ] - DQS gating system latency for byte lane 0
- * bits [ 1:0 ] - DQS gating phase select for byte lane 0
- */
-static void mctl_set_dqs_gating_delay(int rank, u32 dqs_gating_delay)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 lane, number_of_lanes = mctl_get_number_of_lanes();
- /* rank0 gating system latency (3 bits per lane: cycles) */
- u32 slr = readl(rank == 0 ? &dram->rslr0 : &dram->rslr1);
- /* rank0 gating phase select (2 bits per lane: 90, 180, 270, 360) */
- u32 dgr = readl(rank == 0 ? &dram->rdgr0 : &dram->rdgr1);
- for (lane = 0; lane < number_of_lanes; lane++) {
- u32 tmp = dqs_gating_delay >> (lane * 8);
- slr &= ~(7 << (lane * 3));
- slr |= ((tmp >> 2) & 7) << (lane * 3);
- dgr &= ~(3 << (lane * 2));
- dgr |= (tmp & 3) << (lane * 2);
- }
- writel(slr, rank == 0 ? &dram->rslr0 : &dram->rslr1);
- writel(dgr, rank == 0 ? &dram->rdgr0 : &dram->rdgr1);
-}
-
-static int dramc_scan_readpipe(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 reg_val;
-
- /* data training trigger */
- clrbits_le32(&dram->csr, DRAM_CSR_FAILED);
- setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING);
-
- /* check whether data training process has completed */
- await_bits_clear(&dram->ccr, DRAM_CCR_DATA_TRAINING);
-
- /* check data training result */
- reg_val = readl(&dram->csr);
- if (reg_val & DRAM_CSR_FAILED)
- return -1;
-
- return 0;
-}
-
-static void dramc_clock_output_en(u32 on)
-{
-#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
- if (on)
- setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
- else
- clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
-#endif
-#ifdef CONFIG_MACH_SUN4I
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- if (on)
- setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
- else
- clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
-#endif
-}
-
-/* tRFC in nanoseconds for different densities (from the DDR3 spec) */
-static const u16 tRFC_DDR3_table[6] = {
- /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */
- 90, 90, 110, 160, 300, 350
-};
-
-static void dramc_set_autorefresh_cycle(u32 clk, u32 density)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 tRFC, tREFI;
-
- tRFC = (tRFC_DDR3_table[density] * clk + 999) / 1000;
- tREFI = (7987 * clk) >> 10; /* <= 7.8us */
-
- writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr);
-}
-
-/* Calculate the value for A11, A10, A9 bits in MR0 (write recovery) */
-static u32 ddr3_write_recovery(u32 clk)
-{
- u32 twr_ns = 15; /* DDR3 spec says that it is 15ns for all speed bins */
- u32 twr_ck = (twr_ns * clk + 999) / 1000;
- if (twr_ck < 5)
- return 1;
- else if (twr_ck <= 8)
- return twr_ck - 4;
- else if (twr_ck <= 10)
- return 5;
- else
- return 6;
-}
-
-/*
- * If the dram->ppwrsctl (SDR_DPCR) register has the lowest bit set to 1, this
- * means that DRAM is currently in self-refresh mode and retaining the old
- * data. Since we have no idea what to do in this situation yet, just set this
- * register to 0 and initialize DRAM in the same way as on any normal reboot
- * (discarding whatever was stored there).
- *
- * Note: on sun7i hardware, the highest 16 bits need to be set to 0x1651 magic
- * value for this write operation to have any effect. On sun5i hadware this
- * magic value is not necessary. And on sun4i hardware the writes to this
- * register seem to have no effect at all.
- */
-static void mctl_disable_power_save(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- writel(0x16510000, &dram->ppwrsctl);
-}
-
-/*
- * After the DRAM is powered up or reset, the DDR3 spec requires to wait at
- * least 500 us before driving the CKE pin (Clock Enable) high. The dram->idct
- * (SDR_IDCR) register appears to configure this delay, which gets applied
- * right at the time when the DRAM initialization is activated in the
- * 'mctl_ddr3_initialize' function.
- */
-static void mctl_set_cke_delay(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
- /* The CKE delay is represented in DRAM clock cycles, multiplied by N
- * (where N=2 for sun4i/sun5i and N=3 for sun7i). Here it is set to
- * the maximum possible value 0x1ffff, just like in the Allwinner's
- * boot0 bootloader. The resulting delay value is somewhere between
- * ~0.4 ms (sun5i with 648 MHz DRAM clock speed) and ~1.1 ms (sun7i
- * with 360 MHz DRAM clock speed). */
- setbits_le32(&dram->idcr, 0x1ffff);
-}
-
-/*
- * This triggers the DRAM initialization. It performs sending the mode registers
- * to the DRAM among other things. Very likely the ZQCL command is also getting
- * executed (to do the initial impedance calibration on the DRAM side of the
- * wire). The memory controller and the PHY must be already configured before
- * calling this function.
- */
-static void mctl_ddr3_initialize(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- setbits_le32(&dram->ccr, DRAM_CCR_INIT);
- await_bits_clear(&dram->ccr, DRAM_CCR_INIT);
-}
-
-/*
- * Perform impedance calibration on the DRAM controller side of the wire.
- */
-static void mctl_set_impedance(u32 zq, u32 odt_en)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 reg_val;
- u32 zprog = zq & 0xFF, zdata = (zq >> 8) & 0xFFFFF;
-
-#ifndef CONFIG_MACH_SUN7I
- /* Appears that some kind of automatically initiated default
- * ZQ calibration is already in progress at this point on sun4i/sun5i
- * hardware, but not on sun7i. So it is reasonable to wait for its
- * completion before doing anything else. */
- await_bits_set(&dram->zqsr, DRAM_ZQSR_ZDONE);
-#endif
-
- /* ZQ calibration is not really useful unless ODT is enabled */
- if (!odt_en)
- return;
-
-#ifdef CONFIG_MACH_SUN7I
- /* Enabling ODT in SDR_IOCR on sun7i hardware results in a deadlock
- * unless bit 24 is set in SDR_ZQCR1. Not much is known about the
- * SDR_ZQCR1 register, but there are hints indicating that it might
- * be related to periodic impedance re-calibration. This particular
- * magic value is borrowed from the Allwinner boot0 bootloader, and
- * using it helps to avoid troubles */
- writel((1 << 24) | (1 << 1), &dram->zqcr1);
-#endif
-
- /* Needed at least for sun5i, because it does not self clear there */
- clrbits_le32(&dram->zqcr0, DRAM_ZQCR0_ZCAL);
-
- if (zdata) {
- /* Set the user supplied impedance data */
- reg_val = DRAM_ZQCR0_ZDEN | zdata;
- writel(reg_val, &dram->zqcr0);
- /* no need to wait, this takes effect immediately */
- } else {
- /* Do the calibration using the external resistor */
- reg_val = DRAM_ZQCR0_ZCAL | DRAM_ZQCR0_IMP_DIV(zprog);
- writel(reg_val, &dram->zqcr0);
- /* Wait for the new impedance configuration to settle */
- await_bits_set(&dram->zqsr, DRAM_ZQSR_ZDONE);
- }
-
- /* Needed at least for sun5i, because it does not self clear there */
- clrbits_le32(&dram->zqcr0, DRAM_ZQCR0_ZCAL);
-
- /* Set I/O configure register */
- writel(DRAM_IOCR_ODT_EN(odt_en), &dram->iocr);
-}
-
-static unsigned long dramc_init_helper(struct dram_para *para)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 reg_val;
- u32 density;
- int ret_val;
-
- /*
- * only single rank DDR3 is supported by this code even though the
- * hardware can theoretically support DDR2 and up to two ranks
- */
- if (para->type != DRAM_MEMORY_TYPE_DDR3 || para->rank_num != 1)
- return 0;
-
- /* setup DRAM relative clock */
- mctl_setup_dram_clock(para->clock, para->mbus_clock);
-
- /* Disable any pad power save control */
- mctl_disable_power_save();
-
- mctl_set_drive();
-
- /* dram clock off */
- dramc_clock_output_en(0);
-
-#ifdef CONFIG_MACH_SUN4I
- /* select dram controller 1 */
- writel(DRAM_CSEL_MAGIC, &dram->csel);
-#endif
-
- mctl_itm_disable();
- mctl_enable_dll0(para->tpr3);
-
- /* configure external DRAM */
- reg_val = DRAM_DCR_TYPE_DDR3;
- reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3);
-
- if (para->density == 256)
- density = DRAM_DCR_CHIP_DENSITY_256M;
- else if (para->density == 512)
- density = DRAM_DCR_CHIP_DENSITY_512M;
- else if (para->density == 1024)
- density = DRAM_DCR_CHIP_DENSITY_1024M;
- else if (para->density == 2048)
- density = DRAM_DCR_CHIP_DENSITY_2048M;
- else if (para->density == 4096)
- density = DRAM_DCR_CHIP_DENSITY_4096M;
- else if (para->density == 8192)
- density = DRAM_DCR_CHIP_DENSITY_8192M;
- else
- density = DRAM_DCR_CHIP_DENSITY_256M;
-
- reg_val |= DRAM_DCR_CHIP_DENSITY(density);
- reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1);
- reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
- reg_val |= DRAM_DCR_CMD_RANK_ALL;
- reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
- writel(reg_val, &dram->dcr);
-
- dramc_clock_output_en(1);
-
- mctl_set_impedance(para->zq, para->odt_en);
-
- mctl_set_cke_delay();
-
- mctl_ddr3_reset();
-
- udelay(1);
-
- await_bits_clear(&dram->ccr, DRAM_CCR_INIT);
-
- mctl_enable_dllx(para->tpr3);
-
- /* set refresh period */
- dramc_set_autorefresh_cycle(para->clock, density);
-
- /* set timing parameters */
- writel(para->tpr0, &dram->tpr0);
- writel(para->tpr1, &dram->tpr1);
- writel(para->tpr2, &dram->tpr2);
-
- reg_val = DRAM_MR_BURST_LENGTH(0x0);
-#if (defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I))
- reg_val |= DRAM_MR_POWER_DOWN;
-#endif
- reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
- reg_val |= DRAM_MR_WRITE_RECOVERY(ddr3_write_recovery(para->clock));
- writel(reg_val, &dram->mr);
-
- writel(para->emr1, &dram->emr);
- writel(para->emr2, &dram->emr2);
- writel(para->emr3, &dram->emr3);
-
- /* disable drift compensation and set passive DQS window mode */
- clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
-
-#ifdef CONFIG_MACH_SUN7I
- /* Command rate timing mode 2T & 1T */
- if (para->tpr4 & 0x1)
- setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T);
-#endif
- /* initialize external DRAM */
- mctl_ddr3_initialize();
-
- /* scan read pipe value */
- mctl_itm_enable();
-
- /* Hardware DQS gate training */
- ret_val = dramc_scan_readpipe();
-
- if (ret_val < 0)
- return 0;
-
- /* allow to override the DQS training results with a custom delay */
- if (para->dqs_gating_delay)
- mctl_set_dqs_gating_delay(0, para->dqs_gating_delay);
-
- /* set the DQS gating window type */
- if (para->active_windowing)
- clrbits_le32(&dram->ccr, DRAM_CCR_DQS_GATE);
- else
- setbits_le32(&dram->ccr, DRAM_CCR_DQS_GATE);
-
- mctl_itm_reset();
-
- /* configure all host port */
- mctl_configure_hostport();
-
- return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
-}
-
-unsigned long dramc_init(struct dram_para *para)
-{
- unsigned long dram_size, actual_density;
-
- /* If the dram configuration is not provided, use a default */
- if (!para)
- return 0;
-
- /* if everything is known, then autodetection is not necessary */
- if (para->io_width && para->bus_width && para->density)
- return dramc_init_helper(para);
-
- /* try to autodetect the DRAM bus width and density */
- para->io_width = 16;
- para->bus_width = 32;
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I)
- /* only A0-A14 address lines on A10/A13, limiting max density to 4096 */
- para->density = 4096;
-#else
- /* all A0-A15 address lines on A20, which allow density 8192 */
- para->density = 8192;
-#endif
-
- dram_size = dramc_init_helper(para);
- if (!dram_size) {
- /* if 32-bit bus width failed, try 16-bit bus width instead */
- para->bus_width = 16;
- dram_size = dramc_init_helper(para);
- if (!dram_size) {
- /* if 16-bit bus width also failed, then bail out */
- return dram_size;
- }
- }
-
- /* check if we need to adjust the density */
- actual_density = (dram_size >> 17) * para->io_width / para->bus_width;
-
- if (actual_density != para->density) {
- /* update the density and re-initialize DRAM again */
- para->density = actual_density;
- dram_size = dramc_init_helper(para);
- }
-
- return dram_size;
-}
--- /dev/null
+/*
+ * sunxi DRAM controller initialization
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c
+ * and earlier U-Boot Allwiner A10 SPL work
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Unfortunately the only documentation we have on the sun7i DRAM
+ * controller is Allwinner boot0 + boot1 code, and that code uses
+ * magic numbers & shifts with no explanations. Hence this code is
+ * rather undocumented and full of magic.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/sys_proto.h>
+
+#define CPU_CFG_CHIP_VER(n) ((n) << 6)
+#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3)
+#define CPU_CFG_CHIP_REV_A 0x0
+#define CPU_CFG_CHIP_REV_C1 0x1
+#define CPU_CFG_CHIP_REV_C2 0x2
+#define CPU_CFG_CHIP_REV_B 0x3
+
+/*
+ * Wait up to 1s for value to be set in given part of reg.
+ */
+static void await_completion(u32 *reg, u32 mask, u32 val)
+{
+ unsigned long tmo = timer_get_us() + 1000000;
+
+ while ((readl(reg) & mask) != val) {
+ if (timer_get_us() > tmo)
+ panic("Timeout initialising DRAM\n");
+ }
+}
+
+/*
+ * Wait up to 1s for mask to be clear in given reg.
+ */
+static inline void await_bits_clear(u32 *reg, u32 mask)
+{
+ await_completion(reg, mask, 0);
+}
+
+/*
+ * Wait up to 1s for mask to be set in given reg.
+ */
+static inline void await_bits_set(u32 *reg, u32 mask)
+{
+ await_completion(reg, mask, mask);
+}
+
+/*
+ * This performs the external DRAM reset by driving the RESET pin low and
+ * then high again. According to the DDR3 spec, the RESET pin needs to be
+ * kept low for at least 200 us.
+ */
+static void mctl_ddr3_reset(void)
+{
+ struct sunxi_dram_reg *dram =
+ (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+#ifdef CONFIG_MACH_SUN4I
+ struct sunxi_timer_reg *timer =
+ (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
+ u32 reg_val;
+
+ writel(0, &timer->cpu_cfg);
+ reg_val = readl(&timer->cpu_cfg);
+
+ if ((reg_val & CPU_CFG_CHIP_VER_MASK) !=
+ CPU_CFG_CHIP_VER(CPU_CFG_CHIP_REV_A)) {
+ setbits_le32(&dram->mcr, DRAM_MCR_RESET);
+ udelay(200);
+ clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
+ } else
+#endif
+ {
+ clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
+ udelay(200);
+ setbits_le32(&dram->mcr, DRAM_MCR_RESET);
+ }
+ /* After the RESET pin is de-asserted, the DDR3 spec requires to wait
+ * for additional 500 us before driving the CKE pin (Clock Enable)
+ * high. The duration of this delay can be configured in the SDR_IDCR
+ * (Initialization Delay Configuration Register) and applied
+ * automatically by the DRAM controller during the DDR3 initialization
+ * step. But SDR_IDCR has limited range on sun4i/sun5i hardware and
+ * can't provide sufficient delay at DRAM clock frequencies higher than
+ * 524 MHz (while Allwinner A13 supports DRAM clock frequency up to
+ * 533 MHz according to the datasheet). Additionally, there is no
+ * official documentation for the SDR_IDCR register anywhere, and
+ * there is always a chance that we are interpreting it wrong.
+ * Better be safe than sorry, so add an explicit delay here. */
+ udelay(500);
+}
+
+static void mctl_set_drive(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+#ifdef CONFIG_MACH_SUN7I
+ clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
+#else
+ clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3),
+#endif
+ DRAM_MCR_MODE_EN(0x3) |
+ 0xffc);
+}
+
+static void mctl_itm_disable(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF);
+}
+
+static void mctl_itm_enable(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF);
+}
+
+static void mctl_itm_reset(void)
+{
+ mctl_itm_disable();
+ udelay(1); /* ITM reset needs a bit of delay */
+ mctl_itm_enable();
+ udelay(1);
+}
+
+static void mctl_enable_dll0(u32 phase)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
+ ((phase >> 16) & 0x3f) << 6);
+ clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE);
+ udelay(2);
+
+ clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE);
+ udelay(22);
+
+ clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET);
+ udelay(22);
+}
+
+/* Get the number of DDR byte lanes */
+static u32 mctl_get_number_of_lanes(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ if ((readl(&dram->dcr) & DRAM_DCR_BUS_WIDTH_MASK) ==
+ DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT))
+ return 4;
+ else
+ return 2;
+}
+
+/*
+ * Note: This differs from pm/standby in that it checks the bus width
+ */
+static void mctl_enable_dllx(u32 phase)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 i, number_of_lanes;
+
+ number_of_lanes = mctl_get_number_of_lanes();
+
+ for (i = 1; i <= number_of_lanes; i++) {
+ clrsetbits_le32(&dram->dllcr[i], 0xf << 14,
+ (phase & 0xf) << 14);
+ clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET,
+ DRAM_DLLCR_DISABLE);
+ phase >>= 4;
+ }
+ udelay(2);
+
+ for (i = 1; i <= number_of_lanes; i++)
+ clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET |
+ DRAM_DLLCR_DISABLE);
+ udelay(22);
+
+ for (i = 1; i <= number_of_lanes; i++)
+ clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE,
+ DRAM_DLLCR_NRESET);
+ udelay(22);
+}
+
+static u32 hpcr_value[32] = {
+#ifdef CONFIG_MACH_SUN5I
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0x1031, 0x1031, 0x0735, 0x1035,
+ 0x1035, 0x0731, 0x1031, 0,
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0x0301, 0x0301, 0x0301, 0
+#endif
+#ifdef CONFIG_MACH_SUN4I
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0x0301, 0x0301, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0x1031, 0x1031, 0x0735, 0x5031,
+ 0x1035, 0x0731, 0x1031, 0x0735,
+ 0x1035, 0x1031, 0x0731, 0x1035,
+ 0x1031, 0x0301, 0x0301, 0x0731
+#endif
+#ifdef CONFIG_MACH_SUN7I
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0x1031, 0x1031, 0x0735, 0x1035,
+ 0x1035, 0x0731, 0x1031, 0x0735,
+ 0x1035, 0x1031, 0x0731, 0x1035,
+ 0x0001, 0x1031, 0, 0x1031
+ /* last row differs from boot0 source table
+ * 0x1031, 0x0301, 0x0301, 0x0731
+ * but boot0 code skips #28 and #30, and sets #29 and #31 to the
+ * value from #28 entry (0x1031)
+ */
+#endif
+};
+
+static void mctl_configure_hostport(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 i;
+
+ for (i = 0; i < 32; i++)
+ writel(hpcr_value[i], &dram->hpcr[i]);
+}
+
+static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk)
+{
+ u32 reg_val;
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ u32 pll5p_clk, pll6x_clk;
+ u32 pll5p_div, pll6x_div;
+ u32 pll5p_rate, pll6x_rate;
+
+ /* setup DRAM PLL */
+ reg_val = readl(&ccm->pll5_cfg);
+ reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */
+ reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */
+ reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */
+ reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */
+#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
+ /* Old kernels are hardcoded to P=1 (divide by 2) */
+ reg_val |= CCM_PLL5_CTRL_P(1);
+#endif
+ if (clk >= 540 && clk < 552) {
+ /* dram = 540MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
+ } else if (clk >= 512 && clk < 528) {
+ /* dram = 512MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
+ } else if (clk >= 496 && clk < 504) {
+ /* dram = 496MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
+ } else if (clk >= 468 && clk < 480) {
+ /* dram = 468MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
+ } else if (clk >= 396 && clk < 408) {
+ /* dram = 396MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
+ } else {
+ /* any other frequency that is a multiple of 24 */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24));
+ }
+ reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */
+ reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */
+ writel(reg_val, &ccm->pll5_cfg);
+ udelay(5500);
+
+ setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK);
+
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+ /* reset GPS */
+ clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE);
+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
+ udelay(1);
+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
+#endif
+
+ /* setup MBUS clock */
+ if (!mbus_clk)
+ mbus_clk = 300;
+
+ /* PLL5P and PLL6 are the potential clock sources for MBUS */
+ pll6x_clk = clock_get_pll6() / 1000000;
+#ifdef CONFIG_MACH_SUN7I
+ pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */
+#endif
+ pll5p_clk = clock_get_pll5p() / 1000000;
+ pll6x_div = DIV_ROUND_UP(pll6x_clk, mbus_clk);
+ pll5p_div = DIV_ROUND_UP(pll5p_clk, mbus_clk);
+ pll6x_rate = pll6x_clk / pll6x_div;
+ pll5p_rate = pll5p_clk / pll5p_div;
+
+ if (pll6x_div <= 16 && pll6x_rate > pll5p_rate) {
+ /* use PLL6 as the MBUS clock source */
+ reg_val = CCM_MBUS_CTRL_GATE |
+ CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
+ CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
+ CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(pll6x_div));
+ } else if (pll5p_div <= 16) {
+ /* use PLL5P as the MBUS clock source */
+ reg_val = CCM_MBUS_CTRL_GATE |
+ CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) |
+ CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
+ CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(pll5p_div));
+ } else {
+ panic("Bad mbus_clk\n");
+ }
+ writel(reg_val, &ccm->mbus_clk_cfg);
+
+ /*
+ * open DRAMC AHB & DLL register clock
+ * close it first
+ */
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
+#else
+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
+#endif
+ udelay(22);
+
+ /* then open it */
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
+#else
+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
+#endif
+ udelay(22);
+}
+
+/*
+ * The data from rslrX and rdgrX registers (X=rank) is stored
+ * in a single 32-bit value using the following format:
+ * bits [31:26] - DQS gating system latency for byte lane 3
+ * bits [25:24] - DQS gating phase select for byte lane 3
+ * bits [23:18] - DQS gating system latency for byte lane 2
+ * bits [17:16] - DQS gating phase select for byte lane 2
+ * bits [15:10] - DQS gating system latency for byte lane 1
+ * bits [ 9:8 ] - DQS gating phase select for byte lane 1
+ * bits [ 7:2 ] - DQS gating system latency for byte lane 0
+ * bits [ 1:0 ] - DQS gating phase select for byte lane 0
+ */
+static void mctl_set_dqs_gating_delay(int rank, u32 dqs_gating_delay)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 lane, number_of_lanes = mctl_get_number_of_lanes();
+ /* rank0 gating system latency (3 bits per lane: cycles) */
+ u32 slr = readl(rank == 0 ? &dram->rslr0 : &dram->rslr1);
+ /* rank0 gating phase select (2 bits per lane: 90, 180, 270, 360) */
+ u32 dgr = readl(rank == 0 ? &dram->rdgr0 : &dram->rdgr1);
+ for (lane = 0; lane < number_of_lanes; lane++) {
+ u32 tmp = dqs_gating_delay >> (lane * 8);
+ slr &= ~(7 << (lane * 3));
+ slr |= ((tmp >> 2) & 7) << (lane * 3);
+ dgr &= ~(3 << (lane * 2));
+ dgr |= (tmp & 3) << (lane * 2);
+ }
+ writel(slr, rank == 0 ? &dram->rslr0 : &dram->rslr1);
+ writel(dgr, rank == 0 ? &dram->rdgr0 : &dram->rdgr1);
+}
+
+static int dramc_scan_readpipe(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 reg_val;
+
+ /* data training trigger */
+ clrbits_le32(&dram->csr, DRAM_CSR_FAILED);
+ setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING);
+
+ /* check whether data training process has completed */
+ await_bits_clear(&dram->ccr, DRAM_CCR_DATA_TRAINING);
+
+ /* check data training result */
+ reg_val = readl(&dram->csr);
+ if (reg_val & DRAM_CSR_FAILED)
+ return -1;
+
+ return 0;
+}
+
+static void dramc_clock_output_en(u32 on)
+{
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ if (on)
+ setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
+ else
+ clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
+#endif
+#ifdef CONFIG_MACH_SUN4I
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ if (on)
+ setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
+ else
+ clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT);
+#endif
+}
+
+/* tRFC in nanoseconds for different densities (from the DDR3 spec) */
+static const u16 tRFC_DDR3_table[6] = {
+ /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */
+ 90, 90, 110, 160, 300, 350
+};
+
+static void dramc_set_autorefresh_cycle(u32 clk, u32 density)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 tRFC, tREFI;
+
+ tRFC = (tRFC_DDR3_table[density] * clk + 999) / 1000;
+ tREFI = (7987 * clk) >> 10; /* <= 7.8us */
+
+ writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr);
+}
+
+/* Calculate the value for A11, A10, A9 bits in MR0 (write recovery) */
+static u32 ddr3_write_recovery(u32 clk)
+{
+ u32 twr_ns = 15; /* DDR3 spec says that it is 15ns for all speed bins */
+ u32 twr_ck = (twr_ns * clk + 999) / 1000;
+ if (twr_ck < 5)
+ return 1;
+ else if (twr_ck <= 8)
+ return twr_ck - 4;
+ else if (twr_ck <= 10)
+ return 5;
+ else
+ return 6;
+}
+
+/*
+ * If the dram->ppwrsctl (SDR_DPCR) register has the lowest bit set to 1, this
+ * means that DRAM is currently in self-refresh mode and retaining the old
+ * data. Since we have no idea what to do in this situation yet, just set this
+ * register to 0 and initialize DRAM in the same way as on any normal reboot
+ * (discarding whatever was stored there).
+ *
+ * Note: on sun7i hardware, the highest 16 bits need to be set to 0x1651 magic
+ * value for this write operation to have any effect. On sun5i hadware this
+ * magic value is not necessary. And on sun4i hardware the writes to this
+ * register seem to have no effect at all.
+ */
+static void mctl_disable_power_save(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ writel(0x16510000, &dram->ppwrsctl);
+}
+
+/*
+ * After the DRAM is powered up or reset, the DDR3 spec requires to wait at
+ * least 500 us before driving the CKE pin (Clock Enable) high. The dram->idct
+ * (SDR_IDCR) register appears to configure this delay, which gets applied
+ * right at the time when the DRAM initialization is activated in the
+ * 'mctl_ddr3_initialize' function.
+ */
+static void mctl_set_cke_delay(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ /* The CKE delay is represented in DRAM clock cycles, multiplied by N
+ * (where N=2 for sun4i/sun5i and N=3 for sun7i). Here it is set to
+ * the maximum possible value 0x1ffff, just like in the Allwinner's
+ * boot0 bootloader. The resulting delay value is somewhere between
+ * ~0.4 ms (sun5i with 648 MHz DRAM clock speed) and ~1.1 ms (sun7i
+ * with 360 MHz DRAM clock speed). */
+ setbits_le32(&dram->idcr, 0x1ffff);
+}
+
+/*
+ * This triggers the DRAM initialization. It performs sending the mode registers
+ * to the DRAM among other things. Very likely the ZQCL command is also getting
+ * executed (to do the initial impedance calibration on the DRAM side of the
+ * wire). The memory controller and the PHY must be already configured before
+ * calling this function.
+ */
+static void mctl_ddr3_initialize(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ setbits_le32(&dram->ccr, DRAM_CCR_INIT);
+ await_bits_clear(&dram->ccr, DRAM_CCR_INIT);
+}
+
+/*
+ * Perform impedance calibration on the DRAM controller side of the wire.
+ */
+static void mctl_set_impedance(u32 zq, u32 odt_en)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 reg_val;
+ u32 zprog = zq & 0xFF, zdata = (zq >> 8) & 0xFFFFF;
+
+#ifndef CONFIG_MACH_SUN7I
+ /* Appears that some kind of automatically initiated default
+ * ZQ calibration is already in progress at this point on sun4i/sun5i
+ * hardware, but not on sun7i. So it is reasonable to wait for its
+ * completion before doing anything else. */
+ await_bits_set(&dram->zqsr, DRAM_ZQSR_ZDONE);
+#endif
+
+ /* ZQ calibration is not really useful unless ODT is enabled */
+ if (!odt_en)
+ return;
+
+#ifdef CONFIG_MACH_SUN7I
+ /* Enabling ODT in SDR_IOCR on sun7i hardware results in a deadlock
+ * unless bit 24 is set in SDR_ZQCR1. Not much is known about the
+ * SDR_ZQCR1 register, but there are hints indicating that it might
+ * be related to periodic impedance re-calibration. This particular
+ * magic value is borrowed from the Allwinner boot0 bootloader, and
+ * using it helps to avoid troubles */
+ writel((1 << 24) | (1 << 1), &dram->zqcr1);
+#endif
+
+ /* Needed at least for sun5i, because it does not self clear there */
+ clrbits_le32(&dram->zqcr0, DRAM_ZQCR0_ZCAL);
+
+ if (zdata) {
+ /* Set the user supplied impedance data */
+ reg_val = DRAM_ZQCR0_ZDEN | zdata;
+ writel(reg_val, &dram->zqcr0);
+ /* no need to wait, this takes effect immediately */
+ } else {
+ /* Do the calibration using the external resistor */
+ reg_val = DRAM_ZQCR0_ZCAL | DRAM_ZQCR0_IMP_DIV(zprog);
+ writel(reg_val, &dram->zqcr0);
+ /* Wait for the new impedance configuration to settle */
+ await_bits_set(&dram->zqsr, DRAM_ZQSR_ZDONE);
+ }
+
+ /* Needed at least for sun5i, because it does not self clear there */
+ clrbits_le32(&dram->zqcr0, DRAM_ZQCR0_ZCAL);
+
+ /* Set I/O configure register */
+ writel(DRAM_IOCR_ODT_EN(odt_en), &dram->iocr);
+}
+
+static unsigned long dramc_init_helper(struct dram_para *para)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 reg_val;
+ u32 density;
+ int ret_val;
+
+ /*
+ * only single rank DDR3 is supported by this code even though the
+ * hardware can theoretically support DDR2 and up to two ranks
+ */
+ if (para->type != DRAM_MEMORY_TYPE_DDR3 || para->rank_num != 1)
+ return 0;
+
+ /* setup DRAM relative clock */
+ mctl_setup_dram_clock(para->clock, para->mbus_clock);
+
+ /* Disable any pad power save control */
+ mctl_disable_power_save();
+
+ mctl_set_drive();
+
+ /* dram clock off */
+ dramc_clock_output_en(0);
+
+#ifdef CONFIG_MACH_SUN4I
+ /* select dram controller 1 */
+ writel(DRAM_CSEL_MAGIC, &dram->csel);
+#endif
+
+ mctl_itm_disable();
+ mctl_enable_dll0(para->tpr3);
+
+ /* configure external DRAM */
+ reg_val = DRAM_DCR_TYPE_DDR3;
+ reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3);
+
+ if (para->density == 256)
+ density = DRAM_DCR_CHIP_DENSITY_256M;
+ else if (para->density == 512)
+ density = DRAM_DCR_CHIP_DENSITY_512M;
+ else if (para->density == 1024)
+ density = DRAM_DCR_CHIP_DENSITY_1024M;
+ else if (para->density == 2048)
+ density = DRAM_DCR_CHIP_DENSITY_2048M;
+ else if (para->density == 4096)
+ density = DRAM_DCR_CHIP_DENSITY_4096M;
+ else if (para->density == 8192)
+ density = DRAM_DCR_CHIP_DENSITY_8192M;
+ else
+ density = DRAM_DCR_CHIP_DENSITY_256M;
+
+ reg_val |= DRAM_DCR_CHIP_DENSITY(density);
+ reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1);
+ reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
+ reg_val |= DRAM_DCR_CMD_RANK_ALL;
+ reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
+ writel(reg_val, &dram->dcr);
+
+ dramc_clock_output_en(1);
+
+ mctl_set_impedance(para->zq, para->odt_en);
+
+ mctl_set_cke_delay();
+
+ mctl_ddr3_reset();
+
+ udelay(1);
+
+ await_bits_clear(&dram->ccr, DRAM_CCR_INIT);
+
+ mctl_enable_dllx(para->tpr3);
+
+ /* set refresh period */
+ dramc_set_autorefresh_cycle(para->clock, density);
+
+ /* set timing parameters */
+ writel(para->tpr0, &dram->tpr0);
+ writel(para->tpr1, &dram->tpr1);
+ writel(para->tpr2, &dram->tpr2);
+
+ reg_val = DRAM_MR_BURST_LENGTH(0x0);
+#if (defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I))
+ reg_val |= DRAM_MR_POWER_DOWN;
+#endif
+ reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
+ reg_val |= DRAM_MR_WRITE_RECOVERY(ddr3_write_recovery(para->clock));
+ writel(reg_val, &dram->mr);
+
+ writel(para->emr1, &dram->emr);
+ writel(para->emr2, &dram->emr2);
+ writel(para->emr3, &dram->emr3);
+
+ /* disable drift compensation and set passive DQS window mode */
+ clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
+
+#ifdef CONFIG_MACH_SUN7I
+ /* Command rate timing mode 2T & 1T */
+ if (para->tpr4 & 0x1)
+ setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T);
+#endif
+ /* initialize external DRAM */
+ mctl_ddr3_initialize();
+
+ /* scan read pipe value */
+ mctl_itm_enable();
+
+ /* Hardware DQS gate training */
+ ret_val = dramc_scan_readpipe();
+
+ if (ret_val < 0)
+ return 0;
+
+ /* allow to override the DQS training results with a custom delay */
+ if (para->dqs_gating_delay)
+ mctl_set_dqs_gating_delay(0, para->dqs_gating_delay);
+
+ /* set the DQS gating window type */
+ if (para->active_windowing)
+ clrbits_le32(&dram->ccr, DRAM_CCR_DQS_GATE);
+ else
+ setbits_le32(&dram->ccr, DRAM_CCR_DQS_GATE);
+
+ mctl_itm_reset();
+
+ /* configure all host port */
+ mctl_configure_hostport();
+
+ return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
+}
+
+unsigned long dramc_init(struct dram_para *para)
+{
+ unsigned long dram_size, actual_density;
+
+ /* If the dram configuration is not provided, use a default */
+ if (!para)
+ return 0;
+
+ /* if everything is known, then autodetection is not necessary */
+ if (para->io_width && para->bus_width && para->density)
+ return dramc_init_helper(para);
+
+ /* try to autodetect the DRAM bus width and density */
+ para->io_width = 16;
+ para->bus_width = 32;
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I)
+ /* only A0-A14 address lines on A10/A13, limiting max density to 4096 */
+ para->density = 4096;
+#else
+ /* all A0-A15 address lines on A20, which allow density 8192 */
+ para->density = 8192;
+#endif
+
+ dram_size = dramc_init_helper(para);
+ if (!dram_size) {
+ /* if 32-bit bus width failed, try 16-bit bus width instead */
+ para->bus_width = 16;
+ dram_size = dramc_init_helper(para);
+ if (!dram_size) {
+ /* if 16-bit bus width also failed, then bail out */
+ return dram_size;
+ }
+ }
+
+ /* check if we need to adjust the density */
+ actual_density = (dram_size >> 17) * para->io_width / para->bus_width;
+
+ if (actual_density != para->density) {
+ /* update the density and re-initialize DRAM again */
+ para->density = actual_density;
+ dram_size = dramc_init_helper(para);
+ }
+
+ return dram_size;
+}
--- /dev/null
+/*
+ * Sun6i platform dram controller init.
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+
+/* DRAM clk & zq defaults, maybe turn these into Kconfig options ? */
+#define DRAM_CLK_DEFAULT 312000000
+#define DRAM_ZQ_DEFAULT 0x78
+
+struct dram_sun6i_para {
+ u8 bus_width;
+ u8 chan;
+ u8 rank;
+ u8 rows;
+ u16 page_size;
+};
+
+/*
+ * Wait up to 1s for value to be set in given part of reg.
+ */
+static void await_completion(u32 *reg, u32 mask, u32 val)
+{
+ unsigned long tmo = timer_get_us() + 1000000;
+
+ while ((readl(reg) & mask) != val) {
+ if (timer_get_us() > tmo)
+ panic("Timeout initialising DRAM\n");
+ }
+}
+
+static void mctl_sys_init(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int dram_clk_div = 2;
+
+ clock_set_pll5(DRAM_CLK_DEFAULT * dram_clk_div);
+
+ clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV0_MASK,
+ CCM_DRAMCLK_CFG_DIV0(dram_clk_div) | CCM_DRAMCLK_CFG_RST |
+ CCM_DRAMCLK_CFG_UPD);
+ await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+ writel(MDFS_CLK_DEFAULT, &ccm->mdfs_clk_cfg);
+
+ /* deassert mctl reset */
+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+
+ /* enable mctl clock */
+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+}
+
+static void mctl_dll_init(int ch_index, struct dram_sun6i_para *para)
+{
+ struct sunxi_mctl_phy_reg *mctl_phy;
+
+ if (ch_index == 0)
+ mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+ else
+ mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
+
+ /* disable + reset dlls */
+ writel(MCTL_DLLCR_DISABLE, &mctl_phy->acdllcr);
+ writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx0dllcr);
+ writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx1dllcr);
+ if (para->bus_width == 32) {
+ writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx2dllcr);
+ writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx3dllcr);
+ }
+ udelay(2);
+
+ /* enable + reset dlls */
+ writel(0, &mctl_phy->acdllcr);
+ writel(0, &mctl_phy->dx0dllcr);
+ writel(0, &mctl_phy->dx1dllcr);
+ if (para->bus_width == 32) {
+ writel(0, &mctl_phy->dx2dllcr);
+ writel(0, &mctl_phy->dx3dllcr);
+ }
+ udelay(22);
+
+ /* enable and release reset of dlls */
+ writel(MCTL_DLLCR_NRESET, &mctl_phy->acdllcr);
+ writel(MCTL_DLLCR_NRESET, &mctl_phy->dx0dllcr);
+ writel(MCTL_DLLCR_NRESET, &mctl_phy->dx1dllcr);
+ if (para->bus_width == 32) {
+ writel(MCTL_DLLCR_NRESET, &mctl_phy->dx2dllcr);
+ writel(MCTL_DLLCR_NRESET, &mctl_phy->dx3dllcr);
+ }
+ udelay(22);
+}
+
+static bool mctl_rank_detect(u32 *gsr0, int rank)
+{
+ const u32 done = MCTL_DX_GSR0_RANK0_TRAIN_DONE << rank;
+ const u32 err = MCTL_DX_GSR0_RANK0_TRAIN_ERR << rank;
+
+ await_completion(gsr0, done, done);
+ await_completion(gsr0 + 0x10, done, done);
+
+ return !(readl(gsr0) & err) && !(readl(gsr0 + 0x10) & err);
+}
+
+static void mctl_channel_init(int ch_index, struct dram_sun6i_para *para)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_mctl_ctl_reg *mctl_ctl;
+ struct sunxi_mctl_phy_reg *mctl_phy;
+
+ if (ch_index == 0) {
+ mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+ mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+ } else {
+ mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL1_BASE;
+ mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
+ }
+
+ writel(MCTL_MCMD_NOP, &mctl_ctl->mcmd);
+ await_completion(&mctl_ctl->mcmd, MCTL_MCMD_BUSY, 0);
+
+ /* PHY initialization */
+ writel(MCTL_PGCR, &mctl_phy->pgcr);
+ writel(MCTL_MR0, &mctl_phy->mr0);
+ writel(MCTL_MR1, &mctl_phy->mr1);
+ writel(MCTL_MR2, &mctl_phy->mr2);
+ writel(MCTL_MR3, &mctl_phy->mr3);
+
+ writel((MCTL_TITMSRST << 18) | (MCTL_TDLLLOCK << 6) | MCTL_TDLLSRST,
+ &mctl_phy->ptr0);
+ /* Unknown magic performed by boot0 */
+ if ((readl(SUNXI_RTC_BASE + 0x20c) & 3) == 2)
+ setbits_le32(&mctl_phy->ptr0, 1 << 18);
+
+ writel((MCTL_TDINIT1 << 19) | MCTL_TDINIT0, &mctl_phy->ptr1);
+ writel((MCTL_TDINIT3 << 17) | MCTL_TDINIT2, &mctl_phy->ptr2);
+
+ writel((MCTL_TCCD << 31) | (MCTL_TRC << 25) | (MCTL_TRRD << 21) |
+ (MCTL_TRAS << 16) | (MCTL_TRCD << 12) | (MCTL_TRP << 8) |
+ (MCTL_TWTR << 5) | (MCTL_TRTP << 2) | (MCTL_TMRD << 0),
+ &mctl_phy->dtpr0);
+
+ writel((MCTL_TDQSCKMAX << 27) | (MCTL_TDQSCK << 24) |
+ (MCTL_TRFC << 16) | (MCTL_TRTODT << 11) |
+ ((MCTL_TMOD - 12) << 9) | (MCTL_TFAW << 3) | (0 << 2) |
+ (MCTL_TAOND << 0), &mctl_phy->dtpr1);
+
+ writel((MCTL_TDLLK << 19) | (MCTL_TCKE << 15) | (MCTL_TXPDLL << 10) |
+ (MCTL_TEXSR << 0), &mctl_phy->dtpr2);
+
+ writel(1, &mctl_ctl->dfitphyupdtype0);
+ writel(MCTL_DCR_DDR3, &mctl_phy->dcr);
+ writel(MCTL_DSGCR, &mctl_phy->dsgcr);
+ writel(MCTL_DXCCR, &mctl_phy->dxccr);
+ writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx0gcr);
+ writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx1gcr);
+ writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx2gcr);
+ writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx3gcr);
+
+ await_completion(&mctl_phy->pgsr, 0x03, 0x03);
+
+ writel(DRAM_ZQ_DEFAULT, &mctl_phy->zq0cr1);
+
+ setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS);
+ writel(MCTL_PIR_STEP1, &mctl_phy->pir);
+ udelay(10);
+ await_completion(&mctl_phy->pgsr, 0x1f, 0x1f);
+
+ /* rank detect */
+ if (!mctl_rank_detect(&mctl_phy->dx0gsr0, 1)) {
+ para->rank = 1;
+ clrbits_le32(&mctl_phy->pgcr, MCTL_PGCR_RANK);
+ }
+
+ /*
+ * channel detect, check channel 1 dx0 and dx1 have rank 0, if not
+ * assume nothing is connected to channel 1.
+ */
+ if (ch_index == 1 && !mctl_rank_detect(&mctl_phy->dx0gsr0, 0)) {
+ para->chan = 1;
+ clrbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN);
+ return;
+ }
+
+ /* bus width detect, if dx2 and dx3 don't have rank 0, assume 16 bit */
+ if (!mctl_rank_detect(&mctl_phy->dx2gsr0, 0)) {
+ para->bus_width = 16;
+ para->page_size = 2048;
+ setbits_le32(&mctl_phy->dx2dllcr, MCTL_DLLCR_DISABLE);
+ setbits_le32(&mctl_phy->dx3dllcr, MCTL_DLLCR_DISABLE);
+ clrbits_le32(&mctl_phy->dx2gcr, MCTL_DX_GCR_EN);
+ clrbits_le32(&mctl_phy->dx3gcr, MCTL_DX_GCR_EN);
+ }
+
+ setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS);
+ writel(MCTL_PIR_STEP2, &mctl_phy->pir);
+ udelay(10);
+ await_completion(&mctl_phy->pgsr, 0x11, 0x11);
+
+ if (readl(&mctl_phy->pgsr) & MCTL_PGSR_TRAIN_ERR_MASK)
+ panic("Training error initialising DRAM\n");
+
+ /* Move to configure state */
+ writel(MCTL_SCTL_CONFIG, &mctl_ctl->sctl);
+ await_completion(&mctl_ctl->sstat, 0x07, 0x01);
+
+ /* Set number of clks per micro-second */
+ writel(DRAM_CLK_DEFAULT / 1000000, &mctl_ctl->togcnt1u);
+ /* Set number of clks per 100 nano-seconds */
+ writel(DRAM_CLK_DEFAULT / 10000000, &mctl_ctl->togcnt100n);
+ /* Set memory timing registers */
+ writel(MCTL_TREFI, &mctl_ctl->trefi);
+ writel(MCTL_TMRD, &mctl_ctl->tmrd);
+ writel(MCTL_TRFC, &mctl_ctl->trfc);
+ writel((MCTL_TPREA << 16) | MCTL_TRP, &mctl_ctl->trp);
+ writel(MCTL_TRTW, &mctl_ctl->trtw);
+ writel(MCTL_TAL, &mctl_ctl->tal);
+ writel(MCTL_TCL, &mctl_ctl->tcl);
+ writel(MCTL_TCWL, &mctl_ctl->tcwl);
+ writel(MCTL_TRAS, &mctl_ctl->tras);
+ writel(MCTL_TRC, &mctl_ctl->trc);
+ writel(MCTL_TRCD, &mctl_ctl->trcd);
+ writel(MCTL_TRRD, &mctl_ctl->trrd);
+ writel(MCTL_TRTP, &mctl_ctl->trtp);
+ writel(MCTL_TWR, &mctl_ctl->twr);
+ writel(MCTL_TWTR, &mctl_ctl->twtr);
+ writel(MCTL_TEXSR, &mctl_ctl->texsr);
+ writel(MCTL_TXP, &mctl_ctl->txp);
+ writel(MCTL_TXPDLL, &mctl_ctl->txpdll);
+ writel(MCTL_TZQCS, &mctl_ctl->tzqcs);
+ writel(MCTL_TZQCSI, &mctl_ctl->tzqcsi);
+ writel(MCTL_TDQS, &mctl_ctl->tdqs);
+ writel(MCTL_TCKSRE, &mctl_ctl->tcksre);
+ writel(MCTL_TCKSRX, &mctl_ctl->tcksrx);
+ writel(MCTL_TCKE, &mctl_ctl->tcke);
+ writel(MCTL_TMOD, &mctl_ctl->tmod);
+ writel(MCTL_TRSTL, &mctl_ctl->trstl);
+ writel(MCTL_TZQCL, &mctl_ctl->tzqcl);
+ writel(MCTL_TMRR, &mctl_ctl->tmrr);
+ writel(MCTL_TCKESR, &mctl_ctl->tckesr);
+ writel(MCTL_TDPD, &mctl_ctl->tdpd);
+
+ /* Unknown magic performed by boot0 */
+ setbits_le32(&mctl_ctl->dfiodtcfg, 1 << 3);
+ clrbits_le32(&mctl_ctl->dfiodtcfg1, 0x1f);
+
+ /* Select 16/32-bits mode for MCTL */
+ if (para->bus_width == 16)
+ setbits_le32(&mctl_ctl->ppcfg, 1);
+
+ /* Set DFI timing registers */
+ writel(MCTL_TCWL, &mctl_ctl->dfitphywrl);
+ writel(MCTL_TCL - 1, &mctl_ctl->dfitrdden);
+ writel(MCTL_DFITPHYRDL, &mctl_ctl->dfitphyrdl);
+ writel(MCTL_DFISTCFG0, &mctl_ctl->dfistcfg0);
+
+ writel(MCTL_MCFG_DDR3, &mctl_ctl->mcfg);
+
+ /* DFI update configuration register */
+ writel(MCTL_DFIUPDCFG_UPD, &mctl_ctl->dfiupdcfg);
+
+ /* Move to access state */
+ writel(MCTL_SCTL_ACCESS, &mctl_ctl->sctl);
+ await_completion(&mctl_ctl->sstat, 0x07, 0x03);
+}
+
+static void mctl_com_init(struct dram_sun6i_para *para)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_mctl_phy_reg * const mctl_phy1 =
+ (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
+ struct sunxi_prcm_reg * const prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+ writel(MCTL_CR_UNKNOWN | MCTL_CR_CHANNEL(para->chan) | MCTL_CR_DDR3 |
+ ((para->bus_width == 32) ? MCTL_CR_BUSW32 : MCTL_CR_BUSW16) |
+ MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
+ MCTL_CR_BANK(1) | MCTL_CR_RANK(para->rank), &mctl_com->cr);
+
+ /* Unknown magic performed by boot0 */
+ setbits_le32(&mctl_com->dbgcr, (1 << 6));
+
+ if (para->chan == 1) {
+ /* Shutdown channel 1 */
+ setbits_le32(&mctl_phy1->aciocr, MCTL_ACIOCR_DISABLE);
+ setbits_le32(&mctl_phy1->dxccr, MCTL_DXCCR_DISABLE);
+ clrbits_le32(&mctl_phy1->dsgcr, MCTL_DSGCR_ENABLE);
+ /*
+ * CH0 ?? this is what boot0 does. Leave as is until we can
+ * confirm this.
+ */
+ setbits_le32(&prcm->vdd_sys_pwroff,
+ PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF);
+ }
+}
+
+static void mctl_port_cfg(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* enable DRAM AXI clock for CPU access */
+ setbits_le32(&ccm->axi_gate, 1 << AXI_GATE_OFFSET_DRAM);
+
+ /* Bunch of magic writes performed by boot0 */
+ writel(0x00400302, &mctl_com->rmcr[0]);
+ writel(0x01000307, &mctl_com->rmcr[1]);
+ writel(0x00400302, &mctl_com->rmcr[2]);
+ writel(0x01000307, &mctl_com->rmcr[3]);
+ writel(0x01000307, &mctl_com->rmcr[4]);
+ writel(0x01000303, &mctl_com->rmcr[6]);
+ writel(0x01000303, &mctl_com->mmcr[0]);
+ writel(0x00400310, &mctl_com->mmcr[1]);
+ writel(0x01000307, &mctl_com->mmcr[2]);
+ writel(0x01000303, &mctl_com->mmcr[3]);
+ writel(0x01800303, &mctl_com->mmcr[4]);
+ writel(0x01800303, &mctl_com->mmcr[5]);
+ writel(0x01800303, &mctl_com->mmcr[6]);
+ writel(0x01800303, &mctl_com->mmcr[7]);
+ writel(0x01000303, &mctl_com->mmcr[8]);
+ writel(0x00000002, &mctl_com->mmcr[15]);
+ writel(0x00000310, &mctl_com->mbagcr[0]);
+ writel(0x00400310, &mctl_com->mbagcr[1]);
+ writel(0x00400310, &mctl_com->mbagcr[2]);
+ writel(0x00000307, &mctl_com->mbagcr[3]);
+ writel(0x00000317, &mctl_com->mbagcr[4]);
+ writel(0x00000307, &mctl_com->mbagcr[5]);
+}
+
+static bool mctl_mem_matches(u32 offset)
+{
+ const int match_count = 64;
+ int i, matches = 0;
+
+ for (i = 0; i < match_count; i++) {
+ if (readl(CONFIG_SYS_SDRAM_BASE + i * 4) ==
+ readl(CONFIG_SYS_SDRAM_BASE + offset + i * 4))
+ matches++;
+ }
+
+ return matches == match_count;
+}
+
+unsigned long sunxi_dram_init(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ u32 offset;
+ int bank, bus, columns;
+
+ /* Set initial parameters, these get modified by the autodetect code */
+ struct dram_sun6i_para para = {
+ .bus_width = 32,
+ .chan = 2,
+ .rank = 2,
+ .page_size = 4096,
+ .rows = 16,
+ };
+
+ mctl_sys_init();
+
+ mctl_dll_init(0, ¶);
+ mctl_dll_init(1, ¶);
+
+ setbits_le32(&mctl_com->ccr,
+ MCTL_CCR_MASTER_CLK_EN |
+ MCTL_CCR_CH0_CLK_EN |
+ MCTL_CCR_CH1_CLK_EN);
+
+ mctl_channel_init(0, ¶);
+ mctl_channel_init(1, ¶);
+ mctl_com_init(¶);
+ mctl_port_cfg();
+
+ /*
+ * Change to 1 ch / sequence / 8192 byte pages / 16 rows /
+ * 8 bit banks / 1 rank mode.
+ */
+ clrsetbits_le32(&mctl_com->cr,
+ MCTL_CR_CHANNEL_MASK | MCTL_CR_PAGE_SIZE_MASK |
+ MCTL_CR_ROW_MASK | MCTL_CR_BANK_MASK | MCTL_CR_RANK_MASK,
+ MCTL_CR_CHANNEL(1) | MCTL_CR_SEQUENCE |
+ MCTL_CR_PAGE_SIZE(8192) | MCTL_CR_ROW(16) |
+ MCTL_CR_BANK(1) | MCTL_CR_RANK(1));
+
+ /* Detect and set page size */
+ for (columns = 7; columns < 20; columns++) {
+ if (mctl_mem_matches(1 << columns))
+ break;
+ }
+ bus = (para.bus_width == 32) ? 2 : 1;
+ columns -= bus;
+ para.page_size = (1 << columns) * (bus << 1);
+ clrsetbits_le32(&mctl_com->cr, MCTL_CR_PAGE_SIZE_MASK,
+ MCTL_CR_PAGE_SIZE(para.page_size));
+
+ /* Detect and set rows */
+ for (para.rows = 11; para.rows < 16; para.rows++) {
+ offset = 1 << (para.rows + columns + bus);
+ if (mctl_mem_matches(offset))
+ break;
+ }
+ clrsetbits_le32(&mctl_com->cr, MCTL_CR_ROW_MASK,
+ MCTL_CR_ROW(para.rows));
+
+ /* Detect bank size */
+ offset = 1 << (para.rows + columns + bus + 2);
+ bank = mctl_mem_matches(offset) ? 0 : 1;
+
+ /* Restore interleave, chan and rank values, set bank size */
+ clrsetbits_le32(&mctl_com->cr,
+ MCTL_CR_CHANNEL_MASK | MCTL_CR_SEQUENCE |
+ MCTL_CR_BANK_MASK | MCTL_CR_RANK_MASK,
+ MCTL_CR_CHANNEL(para.chan) | MCTL_CR_BANK(bank) |
+ MCTL_CR_RANK(para.rank));
+
+ return 1 << (para.rank + para.rows + bank + columns + para.chan + bus);
+}
--- /dev/null
+/*
+ * Sunxi A31 Power Management Unit
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://linux-sunxi.org
+ *
+ * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work
+ *
+ * (C) Copyright 2006-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/p2wi.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+void p2wi_init(void)
+{
+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
+
+ /* Enable p2wi and PIO clk, and de-assert their resets */
+ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI);
+
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUNXI_GPL0_R_P2WI_SCK);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUNXI_GPL1_R_P2WI_SDA);
+
+ /* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */
+ writel(P2WI_CTRL_RESET, &p2wi->ctrl);
+ sdelay(0x100);
+ writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8),
+ &p2wi->cc);
+}
+
+int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data)
+{
+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
+ unsigned long tmo = timer_get_us() + 1000000;
+
+ writel(P2WI_PM_DEV_ADDR(slave_addr) |
+ P2WI_PM_CTRL_ADDR(ctrl_reg) |
+ P2WI_PM_INIT_DATA(init_data) |
+ P2WI_PM_INIT_SEND,
+ &p2wi->pm);
+
+ while ((readl(&p2wi->pm) & P2WI_PM_INIT_SEND)) {
+ if (timer_get_us() > tmo)
+ return -ETIME;
+ }
+
+ return 0;
+}
+
+static int p2wi_await_trans(void)
+{
+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
+ unsigned long tmo = timer_get_us() + 1000000;
+ int ret;
+ u8 reg;
+
+ while (1) {
+ reg = readl(&p2wi->status);
+ if (reg & P2WI_STAT_TRANS_ERR) {
+ ret = -EIO;
+ break;
+ }
+ if (reg & P2WI_STAT_TRANS_DONE) {
+ ret = 0;
+ break;
+ }
+ if (timer_get_us() > tmo) {
+ ret = -ETIME;
+ break;
+ }
+ }
+ writel(reg, &p2wi->status); /* Clear status bits */
+ return ret;
+}
+
+int p2wi_read(const u8 addr, u8 *data)
+{
+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
+ int ret;
+
+ writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
+ writel(P2WI_DATA_NUM_BYTES(1) |
+ P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes);
+ writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
+ writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
+
+ ret = p2wi_await_trans();
+
+ *data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK;
+ return ret;
+}
+
+int p2wi_write(const u8 addr, u8 data)
+{
+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUNXI_P2WI_BASE;
+
+ writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
+ writel(P2WI_DATA_BYTE_1(data), &p2wi->data0);
+ writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes);
+ writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
+ writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
+
+ return p2wi_await_trans();
+}
str r2, [r0]
dsb
- movw r0, #(SUNXI_CPUCFG_BASE & 0xffff)
- movt r0, #(SUNXI_CPUCFG_BASE >> 16)
+ movw r0, #(SUN7I_CPUCFG_BASE & 0xffff)
+ movt r0, #(SUN7I_CPUCFG_BASE >> 16)
@ CPU mask
and r1, r1, #3 @ only care about first cluster
config USE_PRIVATE_LIBGCC
default y if SPL_BUILD
-config SYS_CPU
- default "arm720t" if SPL_BUILD
- default "armv7" if !SPL_BUILD
-
source "arch/arm/cpu/armv7/tegra20/Kconfig"
source "arch/arm/cpu/armv7/tegra30/Kconfig"
source "arch/arm/cpu/armv7/tegra114/Kconfig"
The boot mode pins are latched when the system reset is deasserted
and determine which device the system should load a boot image from.
+config SOC_INIT
+ bool
+ default SPL_BUILD
+
+config DRAM_INIT
+ bool
+ default SPL_BUILD
+
+choice
+ prompt "DDR3 Frequency select"
+ depends on DRAM_INIT
+
+config DDR_FREQ_1600
+ bool "DDR3 1600"
+ depends on MACH_PH1_PRO4 || MACH_PH1_LD4
+
+config DDR_FREQ_1333
+ bool "DDR3 1333"
+ depends on MACH_PH1_LD4 || MACH_PH1_SLD8
+
+endchoice
+
+config DDR_FREQ
+ int
+ default 1333 if DDR_FREQ_1333
+ default 1600 if DDR_FREQ_1600
+
endmenu
obj-y += timer.o
obj-y += reset.o
obj-y += cache_uniphier.o
+obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o
obj-y += dram_init.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
--- /dev/null
+/*
+ * Copyright (C) 2012-2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/compiler.h>
+#include <asm/arch/led.h>
+#include <asm/arch/board.h>
+
+void __weak bcu_init(void)
+{
+};
+void sbc_init(void);
+void sg_init(void);
+void pll_init(void);
+void pin_init(void);
+void clkrst_init(void);
+
+int board_postclk_init(void)
+{
+#ifdef CONFIG_SOC_INIT
+ bcu_init();
+
+ sbc_init();
+
+ sg_init();
+
+ uniphier_board_reset();
+
+ pll_init();
+
+ uniphier_board_init();
+
+ led_write(B, 1, , );
+
+ clkrst_init();
+
+ led_write(B, 2, , );
+#endif
+ pin_init();
+
+ led_write(B, 3, , );
+
+ return 0;
+}
DECLARE_GLOBAL_DATA_PTR;
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#ifdef CONFIG_DRAM_INIT
led_write(B, 4, , );
{
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
obj-y += platdevice.o
obj-y += boot-mode.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \
- sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o
-obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \
- umc_init.o
+obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
+ clkrst_init.o
+obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
+obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o
+++ /dev/null
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/led.h>
-#include <asm/arch/board.h>
-
-void bcu_init(void);
-void sbc_init(void);
-void sg_init(void);
-void pll_init(void);
-void pin_init(void);
-void clkrst_init(void);
-
-int board_postclk_init(void)
-{
- bcu_init();
-
- sbc_init();
-
- sg_init();
-
- pll_init();
-
- uniphier_board_init();
-
- led_write(B, 1, , );
-
- clkrst_init();
-
- led_write(B, 2, , );
-
- pin_init();
-
- led_write(B, 3, , );
-
- return 0;
-}
SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
+
+/* USB : TODO for Masahiro Yamada: move base address to Device Tree */
+struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = {
+ {
+ .base = 0x5a800100,
+ },
+ {
+ .base = 0x5a810100,
+ },
+ {
+ .base = 0x5a820100,
+ },
+};
CONFIG_SDRAM1_SIZE / 0x08000000);
}
-#if CONFIG_DDR_FREQ != 1333 && CONFIG_DDR_FREQ != 1600
-#error Unsupported DDR Frequency.
-#endif
-
#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \
(CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \
CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
obj-y += platdevice.o
obj-y += boot-mode.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \
- sg_init.o pll_init.o clkrst_init.o pinctrl.o
-obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \
- umc_init.o
+obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o
+obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
+obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o
+++ /dev/null
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/led.h>
-#include <asm/arch/board.h>
-
-void sbc_init(void);
-void sg_init(void);
-void pll_init(void);
-void pin_init(void);
-void clkrst_init(void);
-
-int board_postclk_init(void)
-{
- sbc_init();
-
- sg_init();
-
- pll_init();
-
- uniphier_board_init();
-
- led_write(B, 1, , );
-
- clkrst_init();
-
- led_write(B, 2, , );
-
- pin_init();
-
- led_write(B, 3, , );
-
- return 0;
-}
sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */
#endif
+#ifdef CONFIG_USB_EHCI_UNIPHIER
+ sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */
+ sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */
+ sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */
+ sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */
+#endif
+
writel(1, SG_LOADPINCTRL);
}
SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
+
+/* USB : TODO for Masahiro Yamada: move base address to Device Tree */
+struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = {
+ {
+ .base = 0x5a800100,
+ },
+ {
+ .base = 0x5a810100,
+ },
+};
CONFIG_SDRAM1_SIZE / 0x08000000);
}
-#if CONFIG_DDR_FREQ != 1600
-#error Unsupported DDR frequency.
-#endif
-
#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \
(CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \
((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
obj-y += platdevice.o
obj-y += boot-mode.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \
- sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o
-obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \
- umc_init.o
+obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
+ clkrst_init.o
+obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
+obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o
+++ /dev/null
-#include "../ph1-ld4/board_postclk_init.c"
SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
+
+/* USB : TODO for Masahiro Yamada: move base address to Device Tree */
+struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = {
+ {
+ .base = 0x5a800100,
+ },
+ {
+ .base = 0x5a810100,
+ },
+ {
+ .base = 0x5a820100,
+ },
+};
CONFIG_SDRAM1_SIZE / 0x08000000);
}
-#if CONFIG_DDR_FREQ != 1333
-#error Unsupported DDR frequency.
-#endif
-
#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \
(CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \
CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1
#include <common.h>
#include <asm/io.h>
#include <asm/arch/sc-regs.h>
-#include <asm/arch/board.h>
void reset_cpu(unsigned long ignored)
{
u32 tmp;
- uniphier_board_reset();
-
writel(5, SC_IRQTIMSET); /* default value */
tmp = readl(SC_SLFRSTSEL);
config TARGET_ZYNQ_ZC770
bool "Zynq ZC770 Board"
+config TARGET_ZYNQ_ZYBO
+ bool "Zynq Zybo Board"
+
endchoice
config SYS_BOARD
default "zynq_microzed" if TARGET_ZYNQ_MICROZED
default "zynq_zc70x" if TARGET_ZYNQ_ZC70X
default "zynq_zc770" if TARGET_ZYNQ_ZC770
+ default "zynq_zybo" if TARGET_ZYNQ_ZYBO
endif
* first stage bootloader. To get ECC to work all memory has
* been initialized by writing any value.
*/
+ /* cppcheck-suppress nullPointer */
memset((void *)0, 0, 1 * 1024 * 1024);
} else {
puts("ECC disabled ");
+++ /dev/null
-if ARM64
-
-config SYS_CPU
- default "armv8"
-
-endif
dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zed.dtb \
+ zynq-zybo.dtb \
zynq-microzed.dtb \
zynq-zc770-xm010.dtb \
zynq-zc770-xm012.dtb \
zynq-zc770-xm013.dtb
dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb
+dtb-$(CONFIG_SOCFPGA) += socfpga_cyclone5_socrates.dtb
+
targets += $(dtb-y)
DTC_FLAGS += -R 4 -p 0x1000
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ timer0 = &timer0;
+ timer1 = &timer1;
+ timer2 = &timer2;
+ timer3 = &timer3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: intc@fffed000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xfffed000 0x1000>,
+ <0xfffec100 0x100>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@ffe01000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xffe01000 0x1000>;
+ interrupts = <0 104 4>,
+ <0 105 4>,
+ <0 106 4>,
+ <0 107 4>,
+ <0 108 4>,
+ <0 109 4>,
+ <0 110 4>,
+ <0 111 4>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ clocks = <&l4_main_clk>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ can0: can@ffc00000 {
+ compatible = "bosch,d_can";
+ reg = <0xffc00000 0x1000>;
+ interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+ clocks = <&can0_clk>;
+ status = "disabled";
+ };
+
+ can1: can@ffc01000 {
+ compatible = "bosch,d_can";
+ reg = <0xffc01000 0x1000>;
+ interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
+ clocks = <&can1_clk>;
+ status = "disabled";
+ };
+
+ clkmgr@ffd04000 {
+ compatible = "altr,clk-mgr";
+ reg = <0xffd04000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc1: osc1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ osc2: osc2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ f2s_periph_ref_clk: f2s_periph_ref_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ f2s_sdram_ref_clk: f2s_sdram_ref_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ main_pll: main_pll {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-pll-clock";
+ clocks = <&osc1>;
+ reg = <0x40>;
+
+ mpuclk: mpuclk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0xe0 0 9>;
+ reg = <0x48>;
+ };
+
+ mainclk: mainclk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0xe4 0 9>;
+ reg = <0x4C>;
+ };
+
+ dbg_base_clk: dbg_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0xe8 0 9>;
+ reg = <0x50>;
+ };
+
+ main_qspi_clk: main_qspi_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x54>;
+ };
+
+ main_nand_sdmmc_clk: main_nand_sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x58>;
+ };
+
+ cfg_h2f_usr0_clk: cfg_h2f_usr0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x5C>;
+ };
+ };
+
+ periph_pll: periph_pll {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-pll-clock";
+ clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
+ reg = <0x80>;
+
+ emac0_clk: emac0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x88>;
+ };
+
+ emac1_clk: emac1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x8C>;
+ };
+
+ per_qspi_clk: per_qsi_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x90>;
+ };
+
+ per_nand_mmc_clk: per_nand_mmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x94>;
+ };
+
+ per_base_clk: per_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x98>;
+ };
+
+ h2f_usr1_clk: h2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x9C>;
+ };
+ };
+
+ sdram_pll: sdram_pll {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-pll-clock";
+ clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
+ reg = <0xC0>;
+
+ ddr_dqs_clk: ddr_dqs_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&sdram_pll>;
+ reg = <0xC8>;
+ };
+
+ ddr_2x_dqs_clk: ddr_2x_dqs_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&sdram_pll>;
+ reg = <0xCC>;
+ };
+
+ ddr_dq_clk: ddr_dq_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&sdram_pll>;
+ reg = <0xD0>;
+ };
+
+ h2f_usr2_clk: h2f_usr2_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&sdram_pll>;
+ reg = <0xD4>;
+ };
+ };
+
+ mpu_periph_clk: mpu_periph_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&mpuclk>;
+ fixed-divider = <4>;
+ };
+
+ mpu_l2_ram_clk: mpu_l2_ram_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&mpuclk>;
+ fixed-divider = <2>;
+ };
+
+ l4_main_clk: l4_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ clk-gate = <0x60 0>;
+ };
+
+ l3_main_clk: l3_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&mainclk>;
+ fixed-divider = <1>;
+ };
+
+ l3_mp_clk: l3_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ div-reg = <0x64 0 2>;
+ clk-gate = <0x60 1>;
+ };
+
+ l3_sp_clk: l3_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ div-reg = <0x64 2 2>;
+ };
+
+ l4_mp_clk: l4_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>, <&per_base_clk>;
+ div-reg = <0x64 4 3>;
+ clk-gate = <0x60 2>;
+ };
+
+ l4_sp_clk: l4_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>, <&per_base_clk>;
+ div-reg = <0x64 7 3>;
+ clk-gate = <0x60 3>;
+ };
+
+ dbg_at_clk: dbg_at_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x68 0 2>;
+ clk-gate = <0x60 4>;
+ };
+
+ dbg_clk: dbg_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x68 2 2>;
+ clk-gate = <0x60 5>;
+ };
+
+ dbg_trace_clk: dbg_trace_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x6C 0 3>;
+ clk-gate = <0x60 6>;
+ };
+
+ dbg_timer_clk: dbg_timer_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ clk-gate = <0x60 7>;
+ };
+
+ cfg_clk: cfg_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&cfg_h2f_usr0_clk>;
+ clk-gate = <0x60 8>;
+ };
+
+ h2f_user0_clk: h2f_user0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&cfg_h2f_usr0_clk>;
+ clk-gate = <0x60 9>;
+ };
+
+ emac_0_clk: emac_0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&emac0_clk>;
+ clk-gate = <0xa0 0>;
+ };
+
+ emac_1_clk: emac_1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&emac1_clk>;
+ clk-gate = <0xa0 1>;
+ };
+
+ usb_mp_clk: usb_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 2>;
+ div-reg = <0xa4 0 3>;
+ };
+
+ spi_m_clk: spi_m_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 3>;
+ div-reg = <0xa4 3 3>;
+ };
+
+ can0_clk: can0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 4>;
+ div-reg = <0xa4 6 3>;
+ };
+
+ can1_clk: can1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 5>;
+ div-reg = <0xa4 9 3>;
+ };
+
+ gpio_db_clk: gpio_db_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 6>;
+ div-reg = <0xa8 0 24>;
+ };
+
+ h2f_user1_clk: h2f_user1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&h2f_usr1_clk>;
+ clk-gate = <0xa0 7>;
+ };
+
+ sdmmc_clk: sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 8>;
+ clk-phase = <0 135>;
+ };
+
+ nand_x_clk: nand_x_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 9>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 10>;
+ fixed-divider = <4>;
+ };
+
+ qspi_clk: qspi_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+ clk-gate = <0xa0 11>;
+ };
+ };
+ };
+
+ gmac0: ethernet@ff700000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+ reg = <0xff700000 0x2000>;
+ interrupts = <0 115 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+ clocks = <&emac0_clk>;
+ clock-names = "stmmaceth";
+ resets = <&rst EMAC0_RESET>;
+ reset-names = "stmmaceth";
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@ff702000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x60 2>;
+ reg = <0xff702000 0x2000>;
+ interrupts = <0 120 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+ clocks = <&emac1_clk>;
+ clock-names = "stmmaceth";
+ resets = <&rst EMAC1_RESET>;
+ reset-names = "stmmaceth";
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@ffc04000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc04000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 158 0x4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc05000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc05000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 159 0x4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc06000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc06000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 160 0x4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc07000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc07000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 161 0x4>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@ff708000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff708000 0x1000>;
+ clocks = <&per_base_clk>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <29>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 164 4>;
+ };
+ };
+
+ gpio1: gpio@ff709000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff709000 0x1000>;
+ clocks = <&per_base_clk>;
+ status = "disabled";
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <29>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 165 4>;
+ };
+ };
+
+ gpio2: gpio@ff70a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff70a000 0x1000>;
+ clocks = <&per_base_clk>;
+ status = "disabled";
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <27>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 166 4>;
+ };
+ };
+
+ sdr: sdr@ffc25000 {
+ compatible = "syscon";
+ reg = <0xffc25000 0x1000>;
+ };
+
+ sdramedac {
+ compatible = "altr,sdram-edac";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <0 39 4>;
+ };
+
+ L2: l2-cache@fffef000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xfffef000 0x1000>;
+ interrupts = <0 38 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <1 1 1>;
+ arm,data-latency = <2 1 1>;
+ };
+
+ mmc: dwmmc0@ff704000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 139 4>;
+ fifo-depth = <0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clock-names = "biu", "ciu";
+ };
+
+ /* Local timer */
+ timer@fffec600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xfffec600 0x100>;
+ interrupts = <1 13 0xf04>;
+ clocks = <&mpu_periph_clk>;
+ };
+
+ timer0: timer0@ffc08000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 167 4>;
+ reg = <0xffc08000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
+ };
+
+ timer1: timer1@ffc09000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 168 4>;
+ reg = <0xffc09000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
+ };
+
+ timer2: timer2@ffd00000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 169 4>;
+ reg = <0xffd00000 0x1000>;
+ clocks = <&osc1>;
+ clock-names = "timer";
+ };
+
+ timer3: timer3@ffd01000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 170 4>;
+ reg = <0xffd01000 0x1000>;
+ clocks = <&osc1>;
+ clock-names = "timer";
+ };
+
+ uart0: serial0@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02000 0x1000>;
+ interrupts = <0 162 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
+ };
+
+ uart1: serial1@ffc03000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc03000 0x1000>;
+ interrupts = <0 163 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
+ };
+
+ rst: rstmgr@ffd05000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0xffd05000 0x1000>;
+ };
+
+ usbphy0: usbphy@0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb00000 0xffff>;
+ interrupts = <0 125 4>;
+ clocks = <&usb_mp_clk>;
+ clock-names = "otg";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ffb40000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb40000 0xffff>;
+ interrupts = <0 128 4>;
+ clocks = <&usb_mp_clk>;
+ clock-names = "otg";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@ffd02000 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd02000 0x1000>;
+ interrupts = <0 171 4>;
+ clocks = <&osc1>;
+ status = "disabled";
+ };
+
+ watchdog1: watchdog@ffd03000 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd03000 0x1000>;
+ interrupts = <0 172 4>;
+ clocks = <&osc1>;
+ status = "disabled";
+ };
+
+ sysmgr: sysmgr@ffd08000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd08000 0x4000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+ soc {
+ clkmgr@ffd04000 {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+
+ mmc0: dwmmc0@ff704000 {
+ num-slots = <1>;
+ broken-cd;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ };
+
+ ethernet@ff702000 {
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>; /* probe for phy addr */
+ status = "okay";
+ };
+
+ sysmgr@ffd08000 {
+ cpu1-start-addr = <0xffd080c4>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "EBV SOCrates";
+ compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+};
+
+&gmac1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rtc: rtc@68 {
+ compatible = "stm,m41t82";
+ reg = <0x68>;
+ };
+};
+
+&mmc {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Digilent ZYBO board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZYBO Board";
+ compatible = "xlnx,zynq-zybo", "xlnx,zynq-7000";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x20000000>;
+ };
+};
#include <spl.h>
#if defined(CONFIG_MX6)
-/* determine boot device from SRC_SBMR1 register (BOOT_CFG[4:1]) */
+/* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */
u32 spl_boot_device(void)
{
struct src *psrc = (struct src *)SRC_BASE_ADDR;
- unsigned reg = readl(&psrc->sbmr1);
+ unsigned int gpr10_boot = readl(&psrc->gpr10) & (1 << 28);
+ unsigned reg = gpr10_boot ? readl(&psrc->gpr9) : readl(&psrc->sbmr1);
/* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
switch ((reg & 0x000000FF) >> 4) {
int i;
int ret;
char const *panel = getenv("panel");
+
if (!panel) {
for (i = 0; i < display_count; i++) {
struct display_info_t const *dev = displays+i;
break;
}
}
+
if (i < display_count) {
ret = ipuv3_fb_init(&displays[i].mode, 0,
displays[i].pixfmt);
if (!ret) {
- displays[i].enable(displays+i);
+ if (displays[i].enable)
+ displays[i].enable(displays + i);
+
printf("Display: %s (%ux%u)\n",
displays[i].mode.name,
displays[i].mode.xres,
#include <asm/ti-common/sys_proto.h>
#include <asm/arch/cpu.h>
-#define BOARD_REV_ID 0x0
-
u32 get_cpu_rev(void);
u32 get_sysboot_value(void);
#define KS2_NETCP_PDMA_SCHED_BASE 0x24186100
#define KS2_NETCP_PDMA_RX_FLOW_BASE 0x24189000
#define KS2_NETCP_PDMA_RX_FLOW_NUM 96
-#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001
-#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002
#define KS2_NETCP_PDMA_TX_SND_QUEUE 896
/* NETCP */
#define KS2_NETCP_PDMA_SCHED_BASE 0x02004c00
#define KS2_NETCP_PDMA_RX_FLOW_BASE 0x02005000
#define KS2_NETCP_PDMA_RX_FLOW_NUM 32
-#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001
-#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002
#define KS2_NETCP_PDMA_TX_SND_QUEUE 648
/* NETCP */
/* OSR memory size */
#define KS2_OSR_SIZE 0x100000
+/* SGMII SerDes */
+#define KS2_SGMII_SERDES2_BASE 0x02320000
+#define KS2_LANES_PER_SGMII_SERDES 2
+
/* Number of DSP cores */
#define KS2_NUM_DSPS 4
#define KS2_NETCP_PDMA_RX_FLOW_NUM 96
#define KS2_NETCP_PDMA_TX_SND_QUEUE 896
+/* NETCP */
+#define KS2_NETCP_BASE 0x26000000
+
#endif /* __ASM_ARCH_HARDWARE_K2L_H */
#define KS2_EDMA_QEESR 0x108c
#define KS2_EDMA_PARAM_1(x) (0x4020 + (4 * x))
+/* NETCP pktdma */
+#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001
+#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002
+
/* Chip Interrupt Controller */
#define KS2_CIC2_BASE 0x02608000
--- /dev/null
+/*
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SOCFPGA_GPIO_H
+#define _SOCFPGA_GPIO_H
+
+#endif /* _SOCFPGA_GPIO_H */
void socfpga_emac_reset(int enable);
void socfpga_watchdog_reset(void);
+void socfpga_spim_enable(void);
struct socfpga_reset_manager {
u32 status;
#define RSTMGR_PERMODRST_EMAC0_LSB 0
#define RSTMGR_PERMODRST_EMAC1_LSB 1
#define RSTMGR_PERMODRST_L4WD0_LSB 6
+#define RSTMGR_PERMODRST_SPIM0_LSB 18
+#define RSTMGR_PERMODRST_SPIM1_LSB 19
#endif /* _RESET_MANAGER_H_ */
int clock_init(void);
int clock_twi_onoff(int port, int state);
void clock_set_pll1(unsigned int hz);
+void clock_set_pll5(unsigned int hz);
unsigned int clock_get_pll5p(void);
unsigned int clock_get_pll6(void);
void clock_init_safe(void);
#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
#define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
#define CCM_USB_CTRL_PHYGATE (0x1 << 8)
+/* These 2 are sun6i only, define them as 0 on sun4i */
+#define CCM_USB_CTRL_PHY1_CLK 0
+#define CCM_USB_CTRL_PHY2_CLK 0
#endif /* _SUNXI_CLOCK_SUN4I_H */
#define CPU_CLK_SRC_OSC24M 1
#define CPU_CLK_SRC_PLL1 2
-#define PLL1_CFG_DEFAULT 0x90011b21
+#define CCM_PLL1_CTRL_M(n) ((((n) - 1) & 0x3) << 0)
+#define CCM_PLL1_CTRL_K(n) ((((n) - 1) & 0x3) << 4)
+#define CCM_PLL1_CTRL_N(n) ((((n) - 1) & 0x1f) << 8)
+#define CCM_PLL1_CTRL_MAGIC (0x1 << 16)
+#define CCM_PLL1_CTRL_EN (0x1 << 31)
+
+#define CCM_PLL5_CTRL_M(n) ((((n) - 1) & 0x3) << 0)
+#define CCM_PLL5_CTRL_K(n) ((((n) - 1) & 0x3) << 4)
+#define CCM_PLL5_CTRL_N(n) ((((n) - 1) & 0x1f) << 8)
+#define CCM_PLL5_CTRL_UPD (0x1 << 20)
+#define CCM_PLL5_CTRL_EN (0x1 << 31)
#define PLL6_CFG_DEFAULT 0x90041811
#define CCM_PLL6_CTRL_K_SHIFT 4
#define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT)
+#define AHB1_ABP1_DIV_DEFAULT 0x00002020
+
+#define AXI_GATE_OFFSET_DRAM 0
+
+#define AHB_GATE_OFFSET_USB_OHCI1 30
+#define AHB_GATE_OFFSET_USB_OHCI0 29
+#define AHB_GATE_OFFSET_USB_EHCI1 27
+#define AHB_GATE_OFFSET_USB_EHCI0 26
+#define AHB_GATE_OFFSET_MCTL 14
#define AHB_GATE_OFFSET_MMC3 11
#define AHB_GATE_OFFSET_MMC2 10
#define AHB_GATE_OFFSET_MMC1 9
#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
+#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
+#define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
+/* There is no global phy clk gate on sun6i, define as 0 */
+#define CCM_USB_CTRL_PHYGATE 0
+#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
+#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
+
+#define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */
+
+#define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8)
+#define CCM_DRAMCLK_CFG_DIV0_MASK (0xf << 8)
+#define CCM_DRAMCLK_CFG_UPD (0x1 << 16)
+#define CCM_DRAMCLK_CFG_RST (0x1 << 31)
+
+#define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */
+
+#define AHB_RESET_OFFSET_MCTL 14
#define AHB_RESET_OFFSET_MMC3 11
#define AHB_RESET_OFFSET_MMC2 10
#define AHB_RESET_OFFSET_MMC1 9
#define SUNXI_MMC1_BASE 0x01c10000
#define SUNXI_MMC2_BASE 0x01c11000
#define SUNXI_MMC3_BASE 0x01c12000
+#ifndef CONFIG_MACH_SUN6I
#define SUNXI_USB0_BASE 0x01c13000
#define SUNXI_USB1_BASE 0x01c14000
+#endif
#define SUNXI_SS_BASE 0x01c15000
#define SUNXI_HDMI_BASE 0x01c16000
#define SUNXI_SPI2_BASE 0x01c17000
#define SUNXI_SATA_BASE 0x01c18000
+#ifndef CONFIG_MACH_SUN6I
#define SUNXI_PATA_BASE 0x01c19000
#define SUNXI_ACE_BASE 0x01c1a000
#define SUNXI_TVE1_BASE 0x01c1b000
#define SUNXI_USB2_BASE 0x01c1c000
+#else
+#define SUNXI_USB0_BASE 0x01c19000
+#define SUNXI_USB1_BASE 0x01c1a000
+#define SUNXI_USB2_BASE 0x01c1b000
+#endif
#define SUNXI_CSI1_BASE 0x01c1d000
#define SUNXI_TZASC_BASE 0x01c1e000
#define SUNXI_SPI3_BASE 0x01c1f000
#define SUNXI_TP_BASE 0x01c25000
#define SUNXI_PMU_BASE 0x01c25400
-#define SUNXI_CPUCFG_BASE 0x01c25c00
+#define SUN7I_CPUCFG_BASE 0x01c25c00
#define SUNXI_UART0_BASE 0x01c28000
#define SUNXI_UART1_BASE 0x01c28400
#define SUNXI_GMAC_BASE 0x01c50000
#define SUNXI_DRAM_COM_BASE 0x01c62000
-#define SUNXI_DRAM_CTL_BASE 0x01c63000
-#define SUNXI_DRAM_PHY_CH1_BASE 0x01c65000
-#define SUNXI_DRAM_PHY_CH2_BASE 0x01c66000
+#define SUNXI_DRAM_CTL0_BASE 0x01c63000
+#define SUNXI_DRAM_CTL1_BASE 0x01c64000
+#define SUNXI_DRAM_PHY0_BASE 0x01c65000
+#define SUNXI_DRAM_PHY1_BASE 0x01c66000
/* module sram */
#define SUNXI_SRAM_C_BASE 0x01d00000
#define SUNXI_MP_BASE 0x01e80000
#define SUNXI_AVG_BASE 0x01ea0000
+#define SUNXI_RTC_BASE 0x01f00000
#define SUNXI_PRCM_BASE 0x01f01400
+#define SUN6I_CPUCFG_BASE 0x01f01c00
#define SUNXI_R_UART_BASE 0x01f02800
#define SUNXI_R_PIO_BASE 0x01f02c00
#define SUNXI_P2WI_BASE 0x01f03400
--- /dev/null
+/*
+ * Sunxi A31 CPUCFG register definition.
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_CPUCFG_H
+#define _SUNXI_CPUCFG_H
+
+#ifndef __ASSEMBLY__
+
+struct sunxi_cpucfg_reg {
+ u8 res0[0x40]; /* 0x000 */
+ u32 cpu0_rst; /* 0x040 */
+ u32 cpu0_ctrl; /* 0x044 */
+ u32 cpu0_status; /* 0x048 */
+ u8 res1[0x34]; /* 0x04c */
+ u32 cpu1_rst; /* 0x080 */
+ u32 cpu1_ctrl; /* 0x084 */
+ u32 cpu1_status; /* 0x088 */
+ u8 res2[0x34]; /* 0x08c */
+ u32 cpu2_rst; /* 0x0c0 */
+ u32 cpu2_ctrl; /* 0x0c4 */
+ u32 cpu2_status; /* 0x0c8 */
+ u8 res3[0x34]; /* 0x0cc */
+ u32 cpu3_rst; /* 0x100 */
+ u32 cpu3_ctrl; /* 0x104 */
+ u32 cpu3_status; /* 0x108 */
+ u8 res4[0x78]; /* 0x10c */
+ u32 gen_ctrl; /* 0x184 */
+ u32 l2_status; /* 0x188 */
+ u8 res5[0x4]; /* 0x18c */
+ u32 event_in; /* 0x190 */
+ u8 res6[0xc]; /* 0x194 */
+ u32 super_standy_flag; /* 0x1a0 */
+ u32 priv0; /* 0x1a4 */
+ u32 priv1; /* 0x1a8 */
+ u8 res7[0x54]; /* 0x1ac */
+ u32 idle_cnt0_low; /* 0x200 */
+ u32 idle_cnt0_high; /* 0x204 */
+ u32 idle_cnt0_ctrl; /* 0x208 */
+ u8 res8[0x4]; /* 0x20c */
+ u32 idle_cnt1_low; /* 0x210 */
+ u32 idle_cnt1_high; /* 0x214 */
+ u32 idle_cnt1_ctrl; /* 0x218 */
+ u8 res9[0x4]; /* 0x21c */
+ u32 idle_cnt2_low; /* 0x220 */
+ u32 idle_cnt2_high; /* 0x224 */
+ u32 idle_cnt2_ctrl; /* 0x228 */
+ u8 res10[0x4]; /* 0x22c */
+ u32 idle_cnt3_low; /* 0x230 */
+ u32 idle_cnt3_high; /* 0x234 */
+ u32 idle_cnt3_ctrl; /* 0x238 */
+ u8 res11[0x4]; /* 0x23c */
+ u32 idle_cnt4_low; /* 0x240 */
+ u32 idle_cnt4_high; /* 0x244 */
+ u32 idle_cnt4_ctrl; /* 0x248 */
+ u8 res12[0x34]; /* 0x24c */
+ u32 cnt64_ctrl; /* 0x280 */
+ u32 cnt64_low; /* 0x284 */
+ u32 cnt64_high; /* 0x288 */
+};
+
+#endif /* __ASSEMBLY__ */
+#endif /* _SUNXI_CPUCFG_H */
#include <linux/types.h>
-struct sunxi_dram_reg {
- u32 ccr; /* 0x00 controller configuration register */
- u32 dcr; /* 0x04 dram configuration register */
- u32 iocr; /* 0x08 i/o configuration register */
- u32 csr; /* 0x0c controller status register */
- u32 drr; /* 0x10 dram refresh register */
- u32 tpr0; /* 0x14 dram timing parameters register 0 */
- u32 tpr1; /* 0x18 dram timing parameters register 1 */
- u32 tpr2; /* 0x1c dram timing parameters register 2 */
- u32 gdllcr; /* 0x20 global dll control register */
- u8 res0[0x28];
- u32 rslr0; /* 0x4c rank system latency register */
- u32 rslr1; /* 0x50 rank system latency register */
- u8 res1[0x8];
- u32 rdgr0; /* 0x5c rank dqs gating register */
- u32 rdgr1; /* 0x60 rank dqs gating register */
- u8 res2[0x34];
- u32 odtcr; /* 0x98 odt configuration register */
- u32 dtr0; /* 0x9c data training register 0 */
- u32 dtr1; /* 0xa0 data training register 1 */
- u32 dtar; /* 0xa4 data training address register */
- u32 zqcr0; /* 0xa8 zq control register 0 */
- u32 zqcr1; /* 0xac zq control register 1 */
- u32 zqsr; /* 0xb0 zq status register */
- u32 idcr; /* 0xb4 initializaton delay configure reg */
- u8 res3[0x138];
- u32 mr; /* 0x1f0 mode register */
- u32 emr; /* 0x1f4 extended mode register */
- u32 emr2; /* 0x1f8 extended mode register */
- u32 emr3; /* 0x1fc extended mode register */
- u32 dllctr; /* 0x200 dll control register */
- u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */
- /* 0x208 dll control register 1(byte 1) */
- /* 0x20c dll control register 2(byte 2) */
- /* 0x210 dll control register 3(byte 3) */
- /* 0x214 dll control register 4(byte 4) */
- u32 dqtr0; /* 0x218 dq timing register */
- u32 dqtr1; /* 0x21c dq timing register */
- u32 dqtr2; /* 0x220 dq timing register */
- u32 dqtr3; /* 0x224 dq timing register */
- u32 dqstr; /* 0x228 dqs timing register */
- u32 dqsbtr; /* 0x22c dqsb timing register */
- u32 mcr; /* 0x230 mode configure register */
- u8 res[0x8];
- u32 ppwrsctl; /* 0x23c pad power save control */
- u32 apr; /* 0x240 arbiter period register */
- u32 pldtr; /* 0x244 priority level data threshold reg */
- u8 res5[0x8];
- u32 hpcr[32]; /* 0x250 host port configure register */
- u8 res6[0x10];
- u32 csel; /* 0x2e0 controller select register */
-};
-
-struct dram_para {
- u32 clock;
- u32 mbus_clock;
- u32 type;
- u32 rank_num;
- u32 density;
- u32 io_width;
- u32 bus_width;
- u32 cas;
- u32 zq;
- u32 odt_en;
- u32 size;
- u32 tpr0;
- u32 tpr1;
- u32 tpr2;
- u32 tpr3;
- u32 tpr4;
- u32 tpr5;
- u32 emr1;
- u32 emr2;
- u32 emr3;
- u32 dqs_gating_delay;
- u32 active_windowing;
-};
-
-#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5)
-#define DRAM_CCR_DQS_GATE (0x1 << 14)
-#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17)
-#define DRAM_CCR_ITM_OFF (0x1 << 28)
-#define DRAM_CCR_DATA_TRAINING (0x1 << 30)
-#define DRAM_CCR_INIT (0x1 << 31)
-
-#define DRAM_MEMORY_TYPE_DDR1 1
-#define DRAM_MEMORY_TYPE_DDR2 2
-#define DRAM_MEMORY_TYPE_DDR3 3
-#define DRAM_MEMORY_TYPE_LPDDR2 4
-#define DRAM_MEMORY_TYPE_LPDDR 5
-#define DRAM_DCR_TYPE (0x1 << 0)
-#define DRAM_DCR_TYPE_DDR2 0x0
-#define DRAM_DCR_TYPE_DDR3 0x1
-#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1)
-#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3)
-#define DRAM_DCR_IO_WIDTH_8BIT 0x0
-#define DRAM_DCR_IO_WIDTH_16BIT 0x1
-#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3)
-#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7)
-#define DRAM_DCR_CHIP_DENSITY_256M 0x0
-#define DRAM_DCR_CHIP_DENSITY_512M 0x1
-#define DRAM_DCR_CHIP_DENSITY_1024M 0x2
-#define DRAM_DCR_CHIP_DENSITY_2048M 0x3
-#define DRAM_DCR_CHIP_DENSITY_4096M 0x4
-#define DRAM_DCR_CHIP_DENSITY_8192M 0x5
-#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6)
-#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7)
-#define DRAM_DCR_BUS_WIDTH_32BIT 0x3
-#define DRAM_DCR_BUS_WIDTH_16BIT 0x1
-#define DRAM_DCR_BUS_WIDTH_8BIT 0x0
-#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10)
-#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3)
-#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12)
-#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13)
-#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3)
-#define DRAM_DCR_MODE_SEQ 0x0
-#define DRAM_DCR_MODE_INTERLEAVE 0x1
-
-#define DRAM_CSR_DTERR (0x1 << 20)
-#define DRAM_CSR_DTIERR (0x1 << 21)
-#define DRAM_CSR_FAILED (DRAM_CSR_DTERR | DRAM_CSR_DTIERR)
-
-#define DRAM_DRR_TRFC(n) ((n) & 0xff)
-#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8)
-#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24)
-
-#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0)
-#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3)
-#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2)
-#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3)
-#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4)
-#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3)
-#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6)
-#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3)
-#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8)
-#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7)
-#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11)
-#define DRAM_MCR_RESET (0x1 << 12)
-#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13)
-#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3)
-#define DRAM_MCR_DCLK_OUT (0x1 << 16)
-
-#define DRAM_DLLCR_NRESET (0x1 << 30)
-#define DRAM_DLLCR_DISABLE (0x1 << 31)
-
-#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20)
-#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff)
-#define DRAM_ZQCR0_ZCAL (1 << 31) /* Starts ZQ calibration when set to 1 */
-#define DRAM_ZQCR0_ZDEN (1 << 28) /* Uses ZDATA instead of doing calibration */
-
-#define DRAM_ZQSR_ZDONE (1 << 31) /* ZQ calibration completion flag */
-
-#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0)
-#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3)
-
-#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0)
-#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7)
-#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4)
-#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7)
-#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9)
-#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7)
-#define DRAM_MR_POWER_DOWN (0x1 << 12)
-
-#define DRAM_CSEL_MAGIC 0x16237495
+/* dram regs definition */
+#if defined(CONFIG_MACH_SUN6I)
+#include <asm/arch/dram_sun6i.h>
+#else
+#include <asm/arch/dram_sun4i.h>
+#endif
unsigned long sunxi_dram_init(void);
-unsigned long dramc_init(struct dram_para *para);
#endif /* _SUNXI_DRAM_H */
--- /dev/null
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Sunxi platform dram register definition.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_DRAM_SUN4I_H
+#define _SUNXI_DRAM_SUN4I_H
+
+struct sunxi_dram_reg {
+ u32 ccr; /* 0x00 controller configuration register */
+ u32 dcr; /* 0x04 dram configuration register */
+ u32 iocr; /* 0x08 i/o configuration register */
+ u32 csr; /* 0x0c controller status register */
+ u32 drr; /* 0x10 dram refresh register */
+ u32 tpr0; /* 0x14 dram timing parameters register 0 */
+ u32 tpr1; /* 0x18 dram timing parameters register 1 */
+ u32 tpr2; /* 0x1c dram timing parameters register 2 */
+ u32 gdllcr; /* 0x20 global dll control register */
+ u8 res0[0x28];
+ u32 rslr0; /* 0x4c rank system latency register */
+ u32 rslr1; /* 0x50 rank system latency register */
+ u8 res1[0x8];
+ u32 rdgr0; /* 0x5c rank dqs gating register */
+ u32 rdgr1; /* 0x60 rank dqs gating register */
+ u8 res2[0x34];
+ u32 odtcr; /* 0x98 odt configuration register */
+ u32 dtr0; /* 0x9c data training register 0 */
+ u32 dtr1; /* 0xa0 data training register 1 */
+ u32 dtar; /* 0xa4 data training address register */
+ u32 zqcr0; /* 0xa8 zq control register 0 */
+ u32 zqcr1; /* 0xac zq control register 1 */
+ u32 zqsr; /* 0xb0 zq status register */
+ u32 idcr; /* 0xb4 initializaton delay configure reg */
+ u8 res3[0x138];
+ u32 mr; /* 0x1f0 mode register */
+ u32 emr; /* 0x1f4 extended mode register */
+ u32 emr2; /* 0x1f8 extended mode register */
+ u32 emr3; /* 0x1fc extended mode register */
+ u32 dllctr; /* 0x200 dll control register */
+ u32 dllcr[5]; /* 0x204 dll control register 0(byte 0) */
+ /* 0x208 dll control register 1(byte 1) */
+ /* 0x20c dll control register 2(byte 2) */
+ /* 0x210 dll control register 3(byte 3) */
+ /* 0x214 dll control register 4(byte 4) */
+ u32 dqtr0; /* 0x218 dq timing register */
+ u32 dqtr1; /* 0x21c dq timing register */
+ u32 dqtr2; /* 0x220 dq timing register */
+ u32 dqtr3; /* 0x224 dq timing register */
+ u32 dqstr; /* 0x228 dqs timing register */
+ u32 dqsbtr; /* 0x22c dqsb timing register */
+ u32 mcr; /* 0x230 mode configure register */
+ u8 res[0x8];
+ u32 ppwrsctl; /* 0x23c pad power save control */
+ u32 apr; /* 0x240 arbiter period register */
+ u32 pldtr; /* 0x244 priority level data threshold reg */
+ u8 res5[0x8];
+ u32 hpcr[32]; /* 0x250 host port configure register */
+ u8 res6[0x10];
+ u32 csel; /* 0x2e0 controller select register */
+};
+
+struct dram_para {
+ u32 clock;
+ u32 mbus_clock;
+ u32 type;
+ u32 rank_num;
+ u32 density;
+ u32 io_width;
+ u32 bus_width;
+ u32 cas;
+ u32 zq;
+ u32 odt_en;
+ u32 size;
+ u32 tpr0;
+ u32 tpr1;
+ u32 tpr2;
+ u32 tpr3;
+ u32 tpr4;
+ u32 tpr5;
+ u32 emr1;
+ u32 emr2;
+ u32 emr3;
+ u32 dqs_gating_delay;
+ u32 active_windowing;
+};
+
+#define DRAM_CCR_COMMAND_RATE_1T (0x1 << 5)
+#define DRAM_CCR_DQS_GATE (0x1 << 14)
+#define DRAM_CCR_DQS_DRIFT_COMP (0x1 << 17)
+#define DRAM_CCR_ITM_OFF (0x1 << 28)
+#define DRAM_CCR_DATA_TRAINING (0x1 << 30)
+#define DRAM_CCR_INIT (0x1 << 31)
+
+#define DRAM_MEMORY_TYPE_DDR1 1
+#define DRAM_MEMORY_TYPE_DDR2 2
+#define DRAM_MEMORY_TYPE_DDR3 3
+#define DRAM_MEMORY_TYPE_LPDDR2 4
+#define DRAM_MEMORY_TYPE_LPDDR 5
+#define DRAM_DCR_TYPE (0x1 << 0)
+#define DRAM_DCR_TYPE_DDR2 0x0
+#define DRAM_DCR_TYPE_DDR3 0x1
+#define DRAM_DCR_IO_WIDTH(n) (((n) & 0x3) << 1)
+#define DRAM_DCR_IO_WIDTH_MASK DRAM_DCR_IO_WIDTH(0x3)
+#define DRAM_DCR_IO_WIDTH_8BIT 0x0
+#define DRAM_DCR_IO_WIDTH_16BIT 0x1
+#define DRAM_DCR_CHIP_DENSITY(n) (((n) & 0x7) << 3)
+#define DRAM_DCR_CHIP_DENSITY_MASK DRAM_DCR_CHIP_DENSITY(0x7)
+#define DRAM_DCR_CHIP_DENSITY_256M 0x0
+#define DRAM_DCR_CHIP_DENSITY_512M 0x1
+#define DRAM_DCR_CHIP_DENSITY_1024M 0x2
+#define DRAM_DCR_CHIP_DENSITY_2048M 0x3
+#define DRAM_DCR_CHIP_DENSITY_4096M 0x4
+#define DRAM_DCR_CHIP_DENSITY_8192M 0x5
+#define DRAM_DCR_BUS_WIDTH(n) (((n) & 0x7) << 6)
+#define DRAM_DCR_BUS_WIDTH_MASK DRAM_DCR_BUS_WIDTH(0x7)
+#define DRAM_DCR_BUS_WIDTH_32BIT 0x3
+#define DRAM_DCR_BUS_WIDTH_16BIT 0x1
+#define DRAM_DCR_BUS_WIDTH_8BIT 0x0
+#define DRAM_DCR_RANK_SEL(n) (((n) & 0x3) << 10)
+#define DRAM_DCR_RANK_SEL_MASK DRAM_DCR_CMD_RANK(0x3)
+#define DRAM_DCR_CMD_RANK_ALL (0x1 << 12)
+#define DRAM_DCR_MODE(n) (((n) & 0x3) << 13)
+#define DRAM_DCR_MODE_MASK DRAM_DCR_MODE(0x3)
+#define DRAM_DCR_MODE_SEQ 0x0
+#define DRAM_DCR_MODE_INTERLEAVE 0x1
+
+#define DRAM_CSR_DTERR (0x1 << 20)
+#define DRAM_CSR_DTIERR (0x1 << 21)
+#define DRAM_CSR_FAILED (DRAM_CSR_DTERR | DRAM_CSR_DTIERR)
+
+#define DRAM_DRR_TRFC(n) ((n) & 0xff)
+#define DRAM_DRR_TREFI(n) (((n) & 0xffff) << 8)
+#define DRAM_DRR_BURST(n) ((((n) - 1) & 0xf) << 24)
+
+#define DRAM_MCR_MODE_NORM(n) (((n) & 0x3) << 0)
+#define DRAM_MCR_MODE_NORM_MASK DRAM_MCR_MOD_NORM(0x3)
+#define DRAM_MCR_MODE_DQ_OUT(n) (((n) & 0x3) << 2)
+#define DRAM_MCR_MODE_DQ_OUT_MASK DRAM_MCR_MODE_DQ_OUT(0x3)
+#define DRAM_MCR_MODE_ADDR_OUT(n) (((n) & 0x3) << 4)
+#define DRAM_MCR_MODE_ADDR_OUT_MASK DRAM_MCR_MODE_ADDR_OUT(0x3)
+#define DRAM_MCR_MODE_DQ_IN_OUT(n) (((n) & 0x3) << 6)
+#define DRAM_MCR_MODE_DQ_IN_OUT_MASK DRAM_MCR_MODE_DQ_IN_OUT(0x3)
+#define DRAM_MCR_MODE_DQ_TURNON_DELAY(n) (((n) & 0x7) << 8)
+#define DRAM_MCR_MODE_DQ_TURNON_DELAY_MASK DRAM_MCR_MODE_DQ_TURNON_DELAY(0x7)
+#define DRAM_MCR_MODE_ADDR_IN (0x1 << 11)
+#define DRAM_MCR_RESET (0x1 << 12)
+#define DRAM_MCR_MODE_EN(n) (((n) & 0x3) << 13)
+#define DRAM_MCR_MODE_EN_MASK DRAM_MCR_MOD_EN(0x3)
+#define DRAM_MCR_DCLK_OUT (0x1 << 16)
+
+#define DRAM_DLLCR_NRESET (0x1 << 30)
+#define DRAM_DLLCR_DISABLE (0x1 << 31)
+
+#define DRAM_ZQCR0_IMP_DIV(n) (((n) & 0xff) << 20)
+#define DRAM_ZQCR0_IMP_DIV_MASK DRAM_ZQCR0_IMP_DIV(0xff)
+#define DRAM_ZQCR0_ZCAL (1 << 31) /* Starts ZQ calibration when set to 1 */
+#define DRAM_ZQCR0_ZDEN (1 << 28) /* Uses ZDATA instead of doing calibration */
+
+#define DRAM_ZQSR_ZDONE (1 << 31) /* ZQ calibration completion flag */
+
+#define DRAM_IOCR_ODT_EN(n) ((((n) & 0x3) << 30) | ((n) & 0x3) << 0)
+#define DRAM_IOCR_ODT_EN_MASK DRAM_IOCR_ODT_EN(0x3)
+
+#define DRAM_MR_BURST_LENGTH(n) (((n) & 0x7) << 0)
+#define DRAM_MR_BURST_LENGTH_MASK DRAM_MR_BURST_LENGTH(0x7)
+#define DRAM_MR_CAS_LAT(n) (((n) & 0x7) << 4)
+#define DRAM_MR_CAS_LAT_MASK DRAM_MR_CAS_LAT(0x7)
+#define DRAM_MR_WRITE_RECOVERY(n) (((n) & 0x7) << 9)
+#define DRAM_MR_WRITE_RECOVERY_MASK DRAM_MR_WRITE_RECOVERY(0x7)
+#define DRAM_MR_POWER_DOWN (0x1 << 12)
+
+#define DRAM_CSEL_MAGIC 0x16237495
+
+unsigned long dramc_init(struct dram_para *para);
+
+#endif /* _SUNXI_DRAM_SUN4I_H */
--- /dev/null
+/*
+ * Sun6i platform dram controller register and constant defines
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_DRAM_SUN6I_H
+#define _SUNXI_DRAM_SUN6I_H
+
+struct sunxi_mctl_com_reg {
+ u32 cr; /* 0x00 */
+ u32 ccr; /* 0x04 controller configuration register */
+ u32 dbgcr; /* 0x08 */
+ u32 dbgcr1; /* 0x0c */
+ u32 rmcr[8]; /* 0x10 */
+ u32 mmcr[16]; /* 0x30 */
+ u32 mbagcr[6]; /* 0x70 */
+ u32 maer; /* 0x88 */
+ u8 res0[0x14]; /* 0x8c */
+ u32 mdfscr; /* 0x100 */
+ u32 mdfsmer; /* 0x104 */
+ u32 mdfsmrmr; /* 0x108 */
+ u32 mdfstr0; /* 0x10c */
+ u32 mdfstr1; /* 0x110 */
+ u32 mdfstr2; /* 0x114 */
+ u32 mdfstr3; /* 0x118 */
+ u32 mdfsgcr; /* 0x11c */
+ u8 res1[0x1c]; /* 0x120 */
+ u32 mdfsivr; /* 0x13c */
+ u8 res2[0x0c]; /* 0x140 */
+ u32 mdfstcr; /* 0x14c */
+};
+
+struct sunxi_mctl_ctl_reg {
+ u8 res0[0x04]; /* 0x00 */
+ u32 sctl; /* 0x04 */
+ u32 sstat; /* 0x08 */
+ u8 res1[0x34]; /* 0x0c */
+ u32 mcmd; /* 0x40 */
+ u8 res2[0x08]; /* 0x44 */
+ u32 cmdstat; /* 0x4c */
+ u32 cmdstaten; /* 0x50 */
+ u8 res3[0x0c]; /* 0x54 */
+ u32 mrrcfg0; /* 0x60 */
+ u32 mrrstat0; /* 0x64 */
+ u32 mrrstat1; /* 0x68 */
+ u8 res4[0x10]; /* 0x6c */
+ u32 mcfg1; /* 0x7c */
+ u32 mcfg; /* 0x80 */
+ u32 ppcfg; /* 0x84 */
+ u32 mstat; /* 0x88 */
+ u32 lp2zqcfg; /* 0x8c */
+ u8 res5[0x04]; /* 0x90 */
+ u32 dtustat; /* 0x94 */
+ u32 dtuna; /* 0x98 */
+ u32 dtune; /* 0x9c */
+ u32 dtuprd0; /* 0xa0 */
+ u32 dtuprd1; /* 0xa4 */
+ u32 dtuprd2; /* 0xa8 */
+ u32 dtuprd3; /* 0xac */
+ u32 dtuawdt; /* 0xb0 */
+ u8 res6[0x0c]; /* 0xb4 */
+ u32 togcnt1u; /* 0xc0 */
+ u8 res7[0x08]; /* 0xc4 */
+ u32 togcnt100n; /* 0xcc */
+ u32 trefi; /* 0xd0 */
+ u32 tmrd; /* 0xd4 */
+ u32 trfc; /* 0xd8 */
+ u32 trp; /* 0xdc */
+ u32 trtw; /* 0xe0 */
+ u32 tal; /* 0xe4 */
+ u32 tcl; /* 0xe8 */
+ u32 tcwl; /* 0xec */
+ u32 tras; /* 0xf0 */
+ u32 trc; /* 0xf4 */
+ u32 trcd; /* 0xf8 */
+ u32 trrd; /* 0xfc */
+ u32 trtp; /* 0x100 */
+ u32 twr; /* 0x104 */
+ u32 twtr; /* 0x108 */
+ u32 texsr; /* 0x10c */
+ u32 txp; /* 0x110 */
+ u32 txpdll; /* 0x114 */
+ u32 tzqcs; /* 0x118 */
+ u32 tzqcsi; /* 0x11c */
+ u32 tdqs; /* 0x120 */
+ u32 tcksre; /* 0x124 */
+ u32 tcksrx; /* 0x128 */
+ u32 tcke; /* 0x12c */
+ u32 tmod; /* 0x130 */
+ u32 trstl; /* 0x134 */
+ u32 tzqcl; /* 0x138 */
+ u32 tmrr; /* 0x13c */
+ u32 tckesr; /* 0x140 */
+ u32 tdpd; /* 0x144 */
+ u8 res8[0xb8]; /* 0x148 */
+ u32 dtuwactl; /* 0x200 */
+ u32 dturactl; /* 0x204 */
+ u32 dtucfg; /* 0x208 */
+ u32 dtuectl; /* 0x20c */
+ u32 dtuwd0; /* 0x210 */
+ u32 dtuwd1; /* 0x214 */
+ u32 dtuwd2; /* 0x218 */
+ u32 dtuwd3; /* 0x21c */
+ u32 dtuwdm; /* 0x220 */
+ u32 dturd0; /* 0x224 */
+ u32 dturd1; /* 0x228 */
+ u32 dturd2; /* 0x22c */
+ u32 dturd3; /* 0x230 */
+ u32 dtulfsrwd; /* 0x234 */
+ u32 dtulfsrrd; /* 0x238 */
+ u32 dtueaf; /* 0x23c */
+ u32 dfitctldly; /* 0x240 */
+ u32 dfiodtcfg; /* 0x244 */
+ u32 dfiodtcfg1; /* 0x248 */
+ u32 dfiodtrmap; /* 0x24c */
+ u32 dfitphywrd; /* 0x250 */
+ u32 dfitphywrl; /* 0x254 */
+ u8 res9[0x08]; /* 0x258 */
+ u32 dfitrdden; /* 0x260 */
+ u32 dfitphyrdl; /* 0x264 */
+ u8 res10[0x08]; /* 0x268 */
+ u32 dfitphyupdtype0; /* 0x270 */
+ u32 dfitphyupdtype1; /* 0x274 */
+ u32 dfitphyupdtype2; /* 0x278 */
+ u32 dfitphyupdtype3; /* 0x27c */
+ u32 dfitctrlupdmin; /* 0x280 */
+ u32 dfitctrlupdmax; /* 0x284 */
+ u32 dfitctrlupddly; /* 0x288 */
+ u8 res11[4]; /* 0x28c */
+ u32 dfiupdcfg; /* 0x290 */
+ u32 dfitrefmski; /* 0x294 */
+ u32 dfitcrlupdi; /* 0x298 */
+ u8 res12[0x10]; /* 0x29c */
+ u32 dfitrcfg0; /* 0x2ac */
+ u32 dfitrstat0; /* 0x2b0 */
+ u32 dfitrwrlvlen; /* 0x2b4 */
+ u32 dfitrrdlvlen; /* 0x2b8 */
+ u32 dfitrrdlvlgateen; /* 0x2bc */
+ u8 res13[0x04]; /* 0x2c0 */
+ u32 dfistcfg0; /* 0x2c4 */
+ u32 dfistcfg1; /* 0x2c8 */
+ u8 res14[0x04]; /* 0x2cc */
+ u32 dfitdramclken; /* 0x2d0 */
+ u32 dfitdramclkdis; /* 0x2d4 */
+ u8 res15[0x18]; /* 0x2d8 */
+ u32 dfilpcfg0; /* 0x2f0 */
+};
+
+struct sunxi_mctl_phy_reg {
+ u8 res0[0x04]; /* 0x00 */
+ u32 pir; /* 0x04 */
+ u32 pgcr; /* 0x08 phy general configuration register */
+ u32 pgsr; /* 0x0c */
+ u32 dllgcr; /* 0x10 */
+ u32 acdllcr; /* 0x14 */
+ u32 ptr0; /* 0x18 */
+ u32 ptr1; /* 0x1c */
+ u32 ptr2; /* 0x20 */
+ u32 aciocr; /* 0x24 */
+ u32 dxccr; /* 0x28 DATX8 common configuration register */
+ u32 dsgcr; /* 0x2c dram system general config register */
+ u32 dcr; /* 0x30 */
+ u32 dtpr0; /* 0x34 dram timing parameters register 0 */
+ u32 dtpr1; /* 0x38 dram timing parameters register 1 */
+ u32 dtpr2; /* 0x3c dram timing parameters register 2 */
+ u32 mr0; /* 0x40 mode register 0 */
+ u32 mr1; /* 0x44 mode register 1 */
+ u32 mr2; /* 0x48 mode register 2 */
+ u32 mr3; /* 0x4c mode register 3 */
+ u32 odtcr; /* 0x50 */
+ u32 dtar; /* 0x54 data training address register */
+ u32 dtd0; /* 0x58 */
+ u32 dtd1; /* 0x5c */
+ u8 res1[0x60]; /* 0x60 */
+ u32 dcuar; /* 0xc0 */
+ u32 dcudr; /* 0xc4 */
+ u32 dcurr; /* 0xc8 */
+ u32 dculr; /* 0xcc */
+ u32 dcugcr; /* 0xd0 */
+ u32 dcutpr; /* 0xd4 */
+ u32 dcusr0; /* 0xd8 */
+ u32 dcusr1; /* 0xdc */
+ u8 res2[0x20]; /* 0xe0 */
+ u32 bistrr; /* 0x100 */
+ u32 bistmskr0; /* 0x104 */
+ u32 bistmskr1; /* 0x108 */
+ u32 bistwcr; /* 0x10c */
+ u32 bistlsr; /* 0x110 */
+ u32 bistar0; /* 0x114 */
+ u32 bistar1; /* 0x118 */
+ u32 bistar2; /* 0x11c */
+ u32 bistupdr; /* 0x120 */
+ u32 bistgsr; /* 0x124 */
+ u32 bistwer; /* 0x128 */
+ u32 bistber0; /* 0x12c */
+ u32 bistber1; /* 0x130 */
+ u32 bistber2; /* 0x134 */
+ u32 bistwcsr; /* 0x138 */
+ u32 bistfwr0; /* 0x13c */
+ u32 bistfwr1; /* 0x140 */
+ u8 res3[0x3c]; /* 0x144 */
+ u32 zq0cr0; /* 0x180 zq 0 control register 0 */
+ u32 zq0cr1; /* 0x184 zq 0 control register 1 */
+ u32 zq0sr0; /* 0x188 zq 0 status register 0 */
+ u32 zq0sr1; /* 0x18c zq 0 status register 1 */
+ u8 res4[0x30]; /* 0x190 */
+ u32 dx0gcr; /* 0x1c0 */
+ u32 dx0gsr0; /* 0x1c4 */
+ u32 dx0gsr1; /* 0x1c8 */
+ u32 dx0dllcr; /* 0x1cc */
+ u32 dx0dqtr; /* 0x1d0 */
+ u32 dx0dqstr; /* 0x1d4 */
+ u8 res5[0x28]; /* 0x1d8 */
+ u32 dx1gcr; /* 0x200 */
+ u32 dx1gsr0; /* 0x204 */
+ u32 dx1gsr1; /* 0x208 */
+ u32 dx1dllcr; /* 0x20c */
+ u32 dx1dqtr; /* 0x210 */
+ u32 dx1dqstr; /* 0x214 */
+ u8 res6[0x28]; /* 0x218 */
+ u32 dx2gcr; /* 0x240 */
+ u32 dx2gsr0; /* 0x244 */
+ u32 dx2gsr1; /* 0x248 */
+ u32 dx2dllcr; /* 0x24c */
+ u32 dx2dqtr; /* 0x250 */
+ u32 dx2dqstr; /* 0x254 */
+ u8 res7[0x28]; /* 0x258 */
+ u32 dx3gcr; /* 0x280 */
+ u32 dx3gsr0; /* 0x284 */
+ u32 dx3gsr1; /* 0x288 */
+ u32 dx3dllcr; /* 0x28c */
+ u32 dx3dqtr; /* 0x290 */
+ u32 dx3dqstr; /* 0x294 */
+};
+
+/*
+ * DRAM common (sunxi_mctl_com_reg) register constants.
+ */
+#define MCTL_CR_RANK_MASK (3 << 0)
+#define MCTL_CR_RANK(x) (((x) - 1) << 0)
+#define MCTL_CR_BANK_MASK (3 << 2)
+#define MCTL_CR_BANK(x) ((x) << 2)
+#define MCTL_CR_ROW_MASK (0xf << 4)
+#define MCTL_CR_ROW(x) (((x) - 1) << 4)
+#define MCTL_CR_PAGE_SIZE_MASK (0xf << 8)
+#define MCTL_CR_PAGE_SIZE(x) ((fls(x) - 4) << 8)
+#define MCTL_CR_BUSW_MASK (3 << 12)
+#define MCTL_CR_BUSW16 (1 << 12)
+#define MCTL_CR_BUSW32 (3 << 12)
+#define MCTL_CR_SEQUENCE (1 << 15)
+#define MCTL_CR_DDR3 (3 << 16)
+#define MCTL_CR_CHANNEL_MASK (1 << 19)
+#define MCTL_CR_CHANNEL(x) (((x) - 1) << 19)
+#define MCTL_CR_UNKNOWN ((1 << 22) | (1 << 20))
+#define MCTL_CCR_CH0_CLK_EN (1 << 0)
+#define MCTL_CCR_CH1_CLK_EN (1 << 1)
+#define MCTL_CCR_MASTER_CLK_EN (1 << 2)
+
+/*
+ * DRAM control (sunxi_mctl_ctl_reg) register constants.
+ * Note that we use constant values for a lot of the timings, this is what
+ * the original boot0 bootloader does.
+ */
+#define MCTL_SCTL_CONFIG 1
+#define MCTL_SCTL_ACCESS 2
+#define MCTL_MCMD_NOP 0x88000000
+#define MCTL_MCMD_BUSY 0x80000000
+#define MCTL_MCFG_DDR3 0x70061
+#define MCTL_TREFI 78
+#define MCTL_TMRD 4
+#define MCTL_TRFC 115
+#define MCTL_TRP 9
+#define MCTL_TPREA 0
+#define MCTL_TRTW 2
+#define MCTL_TAL 0
+#define MCTL_TCL 9
+#define MCTL_TCWL 8
+#define MCTL_TRAS 18
+#define MCTL_TRC 23
+#define MCTL_TRCD 9
+#define MCTL_TRRD 4
+#define MCTL_TRTP 4
+#define MCTL_TWR 8
+#define MCTL_TWTR 4
+#define MCTL_TEXSR 512
+#define MCTL_TXP 4
+#define MCTL_TXPDLL 14
+#define MCTL_TZQCS 64
+#define MCTL_TZQCSI 0
+#define MCTL_TDQS 1
+#define MCTL_TCKSRE 5
+#define MCTL_TCKSRX 5
+#define MCTL_TCKE 4
+#define MCTL_TMOD 12
+#define MCTL_TRSTL 80
+#define MCTL_TZQCL 512
+#define MCTL_TMRR 2
+#define MCTL_TCKESR 5
+#define MCTL_TDPD 0
+#define MCTL_DFITPHYRDL 15
+#define MCTL_DFIUPDCFG_UPD (1 << 1)
+#define MCTL_DFISTCFG0 5
+
+/*
+ * DRAM phy (sunxi_mctl_phy_reg) register values / constants.
+ */
+#define MCTL_PIR_CLEAR_STATUS (1 << 28)
+#define MCTL_PIR_STEP1 0xe9
+#define MCTL_PIR_STEP2 0x81
+#define MCTL_PGCR_RANK (1 << 19)
+#define MCTL_PGCR 0x018c0202
+#define MCTL_PGSR_TRAIN_ERR_MASK (3 << 5)
+/* constants for both acdllcr as well as dx#dllcr */
+#define MCTL_DLLCR_NRESET (1 << 30)
+#define MCTL_DLLCR_DISABLE (1 << 31)
+/* ptr constants these are or-ed together to get the final ptr# values */
+#define MCTL_TITMSRST 10
+#define MCTL_TDLLLOCK 2250
+#define MCTL_TDLLSRST 23
+#define MCTL_TDINIT0 217000
+#define MCTL_TDINIT1 160
+#define MCTL_TDINIT2 87000
+#define MCTL_TDINIT3 433
+/* end ptr constants */
+#define MCTL_ACIOCR_DISABLE ((3 << 18) | (1 << 8) | (1 << 3))
+#define MCTL_DXCCR_DISABLE ((1 << 3) | (1 << 2))
+#define MCTL_DXCCR 0x800
+#define MCTL_DSGCR_ENABLE (1 << 28)
+#define MCTL_DSGCR 0xf200001b
+#define MCTL_DCR_DDR3 0x0b
+/* dtpr constants these are or-ed together to get the final dtpr# values */
+#define MCTL_TCCD 0
+#define MCTL_TDQSCKMAX 1
+#define MCTL_TDQSCK 1
+#define MCTL_TRTODT 0
+#define MCTL_TFAW 20
+#define MCTL_TAOND 0
+#define MCTL_TDLLK 512
+/* end dtpr constants */
+#define MCTL_MR0 0x1a50
+#define MCTL_MR1 0x4
+#define MCTL_MR2 ((MCTL_TCWL - 5) << 3)
+#define MCTL_MR3 0x0
+#define MCTL_DX_GCR_EN (1 << 0)
+#define MCTL_DX_GCR 0x880
+#define MCTL_DX_GSR0_RANK0_TRAIN_DONE (1 << 0)
+#define MCTL_DX_GSR0_RANK1_TRAIN_DONE (1 << 1)
+#define MCTL_DX_GSR0_RANK0_TRAIN_ERR (1 << 4)
+#define MCTL_DX_GSR0_RANK1_TRAIN_ERR (1 << 5)
+
+#endif /* _SUNXI_DRAM_SUN6I_H */
#define SUN4I_GPI4_SDC3 2
+#define SUNXI_GPL0_R_P2WI_SCK 3
+#define SUNXI_GPL1_R_P2WI_SDA 3
+
#define SUN8I_GPL2_R_UART_TX 2
#define SUN8I_GPL3_R_UART_RX 2
--- /dev/null
+/*
+ * Sunxi platform Push-Push i2c register definition.
+ *
+ * (c) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://linux-sunxi.org
+ *
+ * (c)Copyright 2006-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_P2WI_H
+#define _SUNXI_P2WI_H
+
+#include <linux/types.h>
+
+#define P2WI_CTRL_RESET (0x1 << 0)
+#define P2WI_CTRL_IRQ_EN (0x1 << 1)
+#define P2WI_CTRL_TRANS_ABORT (0x1 << 6)
+#define P2WI_CTRL_TRANS_START (0x1 << 7)
+
+#define __P2WI_CC_CLK(n) (((n) & 0xff) << 0)
+#define P2WI_CC_CLK_MASK __P2WI_CC_CLK_DIV(0xff)
+#define __P2WI_CC_CLK_DIV(n) (((n) >> 1) - 1)
+#define P2WI_CC_CLK_DIV(n) \
+ __P2WI_CC_CLK(__P2WI_CC_CLK_DIV(n))
+#define P2WI_CC_SDA_OUT_DELAY(n) (((n) & 0x7) << 8)
+#define P2WI_CC_SDA_OUT_DELAY_MASK P2WI_CC_SDA_OUT_DELAY(0x7)
+
+#define P2WI_IRQ_TRANS_DONE (0x1 << 0)
+#define P2WI_IRQ_TRANS_ERR (0x1 << 1)
+#define P2WI_IRQ_LOAD_BUSY (0x1 << 2)
+
+#define P2WI_STAT_TRANS_DONE (0x1 << 0)
+#define P2WI_STAT_TRANS_ERR (0x1 << 1)
+#define P2WI_STAT_LOAD_BUSY (0x1 << 2)
+#define __P2WI_STAT_TRANS_ERR(n) (((n) & 0xff) << 8)
+#define P2WI_STAT_TRANS_ERR_MASK __P2WI_STAT_TRANS_ERR_ID(0xff)
+#define __P2WI_STAT_TRANS_ERR_BYTE_1 0x01
+#define __P2WI_STAT_TRANS_ERR_BYTE_2 0x02
+#define __P2WI_STAT_TRANS_ERR_BYTE_3 0x04
+#define __P2WI_STAT_TRANS_ERR_BYTE_4 0x08
+#define __P2WI_STAT_TRANS_ERR_BYTE_5 0x10
+#define __P2WI_STAT_TRANS_ERR_BYTE_6 0x20
+#define __P2WI_STAT_TRANS_ERR_BYTE_7 0x40
+#define __P2WI_STAT_TRANS_ERR_BYTE_8 0x80
+#define P2WI_STAT_TRANS_ERR_BYTE_1 \
+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_1)
+#define P2WI_STAT_TRANS_ERR_BYTE_2 \
+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_2)
+#define P2WI_STAT_TRANS_ERR_BYTE_3 \
+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_3)
+#define P2WI_STAT_TRANS_ERR_BYTE_4 \
+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_4)
+#define P2WI_STAT_TRANS_ERR_BYTE_5 \
+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_5)
+#define P2WI_STAT_TRANS_ERR_BYTE_6 \
+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_6)
+#define P2WI_STAT_TRANS_ERR_BYTE_7 \
+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_7)
+#define P2WI_STAT_TRANS_ERR_BYTE_8 \
+ __P2WI_STAT_TRANS_ERR(__P2WI_STAT_TRANS_ERR_BYTE_8)
+
+#define P2WI_DATADDR_BYTE_1(n) (((n) & 0xff) << 0)
+#define P2WI_DATADDR_BYTE_1_MASK P2WI_DATADDR_BYTE_1(0xff)
+#define P2WI_DATADDR_BYTE_2(n) (((n) & 0xff) << 8)
+#define P2WI_DATADDR_BYTE_2_MASK P2WI_DATADDR_BYTE_2(0xff)
+#define P2WI_DATADDR_BYTE_3(n) (((n) & 0xff) << 16)
+#define P2WI_DATADDR_BYTE_3_MASK P2WI_DATADDR_BYTE_3(0xff)
+#define P2WI_DATADDR_BYTE_4(n) (((n) & 0xff) << 24)
+#define P2WI_DATADDR_BYTE_4_MASK P2WI_DATADDR_BYTE_4(0xff)
+#define P2WI_DATADDR_BYTE_5(n) (((n) & 0xff) << 0)
+#define P2WI_DATADDR_BYTE_5_MASK P2WI_DATADDR_BYTE_5(0xff)
+#define P2WI_DATADDR_BYTE_6(n) (((n) & 0xff) << 8)
+#define P2WI_DATADDR_BYTE_6_MASK P2WI_DATADDR_BYTE_6(0xff)
+#define P2WI_DATADDR_BYTE_7(n) (((n) & 0xff) << 16)
+#define P2WI_DATADDR_BYTE_7_MASK P2WI_DATADDR_BYTE_7(0xff)
+#define P2WI_DATADDR_BYTE_8(n) (((n) & 0xff) << 24)
+#define P2WI_DATADDR_BYTE_8_MASK P2WI_DATADDR_BYTE_8(0xff)
+
+#define __P2WI_DATA_NUM_BYTES(n) (((n) & 0x7) << 0)
+#define P2WI_DATA_NUM_BYTES_MASK __P2WI_DATA_NUM_BYTES(0x7)
+#define P2WI_DATA_NUM_BYTES(n) __P2WI_DATA_NUM_BYTES((n) - 1)
+#define P2WI_DATA_NUM_BYTES_READ (0x1 << 4)
+
+#define P2WI_DATA_BYTE_1(n) (((n) & 0xff) << 0)
+#define P2WI_DATA_BYTE_1_MASK P2WI_DATA_BYTE_1(0xff)
+#define P2WI_DATA_BYTE_2(n) (((n) & 0xff) << 8)
+#define P2WI_DATA_BYTE_2_MASK P2WI_DATA_BYTE_2(0xff)
+#define P2WI_DATA_BYTE_3(n) (((n) & 0xff) << 16)
+#define P2WI_DATA_BYTE_3_MASK P2WI_DATA_BYTE_3(0xff)
+#define P2WI_DATA_BYTE_4(n) (((n) & 0xff) << 24)
+#define P2WI_DATA_BYTE_4_MASK P2WI_DATA_BYTE_4(0xff)
+#define P2WI_DATA_BYTE_5(n) (((n) & 0xff) << 0)
+#define P2WI_DATA_BYTE_5_MASK P2WI_DATA_BYTE_5(0xff)
+#define P2WI_DATA_BYTE_6(n) (((n) & 0xff) << 8)
+#define P2WI_DATA_BYTE_6_MASK P2WI_DATA_BYTE_6(0xff)
+#define P2WI_DATA_BYTE_7(n) (((n) & 0xff) << 16)
+#define P2WI_DATA_BYTE_7_MASK P2WI_DATA_BYTE_7(0xff)
+#define P2WI_DATA_BYTE_8(n) (((n) & 0xff) << 24)
+#define P2WI_DATA_BYTE_8_MASK P2WI_DATA_BYTE_8(0xff)
+
+#define P2WI_LINECTRL_SDA_CTRL_EN (0x1 << 0)
+#define P2WI_LINECTRL_SDA_OUT_HIGH (0x1 << 1)
+#define P2WI_LINECTRL_SCL_CTRL_EN (0x1 << 2)
+#define P2WI_LINECTRL_SCL_OUT_HIGH (0x1 << 3)
+#define P2WI_LINECTRL_SDA_STATE_HIGH (0x1 << 4)
+#define P2WI_LINECTRL_SCL_STATE_HIGH (0x1 << 5)
+
+#define P2WI_PM_DEV_ADDR(n) (((n) & 0xff) << 0)
+#define P2WI_PM_DEV_ADDR_MASK P2WI_PM_DEV_ADDR(0xff)
+#define P2WI_PM_CTRL_ADDR(n) (((n) & 0xff) << 8)
+#define P2WI_PM_CTRL_ADDR_MASK P2WI_PM_CTRL_ADDR(0xff)
+#define P2WI_PM_INIT_DATA(n) (((n) & 0xff) << 16)
+#define P2WI_PM_INIT_DATA_MASK P2WI_PM_INIT_DATA(0xff)
+#define P2WI_PM_INIT_SEND (0x1 << 31)
+
+struct sunxi_p2wi_reg {
+ u32 ctrl; /* 0x00 control */
+ u32 cc; /* 0x04 clock control */
+ u32 irq; /* 0x08 interrupt */
+ u32 status; /* 0x0c status */
+ u32 dataddr0; /* 0x10 data address 0 */
+ u32 dataddr1; /* 0x14 data address 1 */
+ u32 numbytes; /* 0x18 num bytes */
+ u32 data0; /* 0x1c data buffer 0 */
+ u32 data1; /* 0x20 data buffer 1 */
+ u32 linectrl; /* 0x24 line control */
+ u32 pm; /* 0x28 power management */
+};
+
+void p2wi_init(void);
+int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data);
+int p2wi_read(const u8 addr, u8 *data);
+int p2wi_write(const u8 addr, u8 data);
+
+#endif /* _SUNXI_P2WI_H */
#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
+#define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
#define PRCM_CLK_1WIRE_GATE (0x1 << 31)
--- /dev/null
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PLAT_UNIPHIER_EHCI_H
+#define __PLAT_UNIPHIER_EHCI_H
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include "mio-regs.h"
+
+struct uniphier_ehci_platform_data {
+ unsigned long base;
+};
+
+extern struct uniphier_ehci_platform_data uniphier_ehci_platdata[];
+
+static inline void uniphier_ehci_reset(int index, int on)
+{
+ u32 tmp;
+
+ tmp = readl(MIO_USB_RSTCTRL(index));
+ if (on)
+ tmp &= ~MIO_USB_RSTCTRL_XRST;
+ else
+ tmp |= MIO_USB_RSTCTRL_XRST;
+ writel(tmp, MIO_USB_RSTCTRL(index));
+}
+
+#endif /* __PLAT_UNIPHIER_EHCI_H */
--- /dev/null
+/*
+ * UniPhier MIO (Media I/O) registers
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef ARCH_MIO_REGS_H
+#define ARCH_MIO_REGS_H
+
+#define MIO_BASE 0x59810000
+
+#define MIO_CLKCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0020)
+#define MIO_RSTCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0110)
+#define MIO_USB_RSTCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0114)
+
+#define MIO_USB_RSTCTRL_XRST (0x1 << 0)
+
+#endif /* ARCH_MIO_REGS_H */
.platdata = &serial_device##n \
};
+#include <asm/arch/ehci-uniphier.h>
+
#endif /* ARCH_PLATDEVICE_H */
#define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ (0x2 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A (0x3 << 16)
-#ifndef __ASSEMBLY__
+#ifdef __ASSEMBLY__
+
+ .macro set_pinsel, n, value, ra, rd
+ ldr \ra, =SG_PINSEL_ADDR(\n)
+ ldr \rd, [\ra]
+ and \rd, \rd, #SG_PINSEL_MASK(\n)
+ orr \rd, \rd, #SG_PINSEL_MODE(\n, \value)
+ str \rd, [\ra]
+ .endm
+
+#else
+
#include <linux/types.h>
#include <asm/io.h>
0 : wfi
ldr \wreg2, [\xreg1, GICC_AIAR]
str \wreg2, [\xreg1, GICC_AEOIR]
- and \wreg2, \wreg2, #3ff
+ and \wreg2, \wreg2, #0x3ff
cbnz \wreg2, 0b
.endm
#endif
* \param size size of memory region to change
* \param option dcache option to select
*/
-void mmu_set_region_dcache_behaviour(u32 start, int size,
+void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
enum dcache_option option);
/**
--- /dev/null
+/*
+ * arch/arm/include/debug/8250.S
+ *
+ * Copyright (C) 1994-2013 Russell King
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <linux/serial_reg.h>
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT
+ .endm
+
+#ifdef CONFIG_DEBUG_UART_8250_WORD
+ .macro store, rd, rx:vararg
+ str \rd, \rx
+ .endm
+
+ .macro load, rd, rx:vararg
+ ldr \rd, \rx
+ .endm
+#else
+ .macro store, rd, rx:vararg
+ strb \rd, \rx
+ .endm
+
+ .macro load, rd, rx:vararg
+ ldrb \rd, \rx
+ .endm
+#endif
+
+#define UART_SHIFT CONFIG_DEBUG_UART_8250_SHIFT
+
+ .macro senduart,rd,rx
+ store \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: load \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ .macro waituart,rd,rx
+#ifdef CONFIG_DEBUG_UART_8250_FLOW_CONTROL
+1001: load \rd, [\rx, #UART_MSR << UART_SHIFT]
+ tst \rd, #UART_MSR_CTS
+ beq 1001b
+#endif
+ .endm
obj-y += cache-cp15.o
endif
+obj-$(CONFIG_DEBUG_LL) += debug.o
+
# For EABI conformant tool chains, provide eabi_compat()
ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
extra-y += eabi_compat.o
#include <common.h>
#include <command.h>
#include <image.h>
-#include <vxworks.h>
#include <u-boot/zlib.h>
#include <asm/byteorder.h>
#include <libfdt.h>
debug("%s: Warning: not implemented\n", __func__);
}
-void mmu_set_region_dcache_behaviour(u32 start, int size,
+void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
enum dcache_option option)
{
u32 *page_table = (u32 *)gd->arch.tlb_addr;
- u32 upto, end;
+ unsigned long upto, end;
end = ALIGN(start + size, MMU_SECTION_SIZE) >> MMU_SECTION_SHIFT;
start = start >> MMU_SECTION_SHIFT;
- debug("%s: start=%x, size=%x, option=%d\n", __func__, start, size,
+ debug("%s: start=%pa, size=%zu, option=%d\n", __func__, &start, size,
option);
for (upto = start; upto < end; upto++)
set_section_dcache(upto, option);
--- /dev/null
+/*
+ * linux/arch/arm/kernel/debug.S
+ *
+ * Copyright (C) 1994-1999 Russell King
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * 32-bit debugging code
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ .text
+
+/*
+ * Some debugging routines (useful if you've got MM problems and
+ * printk isn't working). For DEBUGGING ONLY!!! Do not leave
+ * references to these in a production kernel!
+ */
+
+#if !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
+#endif
+
+#ifdef CONFIG_MMU
+ .macro addruart_current, rx, tmp1, tmp2
+ addruart \tmp1, \tmp2, \rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ moveq \rx, \tmp1
+ movne \rx, \tmp2
+ .endm
+
+#else /* !CONFIG_MMU */
+ .macro addruart_current, rx, tmp1, tmp2
+ addruart \rx, \tmp1, \tmp2
+ .endm
+
+#endif /* CONFIG_MMU */
+
+/*
+ * Useful debugging routines
+ */
+ENTRY(printhex8)
+ mov r1, #8
+ b printhex
+ENDPROC(printhex8)
+
+ENTRY(printhex4)
+ mov r1, #4
+ b printhex
+ENDPROC(printhex4)
+
+ENTRY(printhex2)
+ mov r1, #2
+printhex: adr r2, hexbuf
+ add r3, r2, r1
+ mov r1, #0
+ strb r1, [r3]
+1: and r1, r0, #15
+ mov r0, r0, lsr #4
+ cmp r1, #10
+ addlt r1, r1, #'0'
+ addge r1, r1, #'a' - 10
+ strb r1, [r3, #-1]!
+ teq r3, r2
+ bne 1b
+ mov r0, r2
+ b printascii
+ENDPROC(printhex2)
+
+hexbuf: .space 16
+
+ .ltorg
+
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
+ENTRY(printascii)
+ addruart_current r3, r1, r2
+ b 2f
+1: waituart r2, r3
+ senduart r1, r3
+ busyuart r2, r3
+ teq r1, #'\n'
+ moveq r1, #'\r'
+ beq 1b
+2: teq r0, #0
+ ldrneb r1, [r0], #1
+ teqne r1, #0
+ bne 1b
+ mov pc, lr
+ENDPROC(printascii)
+
+ENTRY(printch)
+ addruart_current r3, r1, r2
+ mov r1, r0
+ mov r0, #0
+ b 1b
+ENDPROC(printch)
+
+#ifdef CONFIG_MMU
+ENTRY(debug_ll_addr)
+ addruart r2, r3, ip
+ str r2, [r0]
+ str r3, [r1]
+ mov pc, lr
+ENDPROC(debug_ll_addr)
+#endif
+
+#else
+
+ENTRY(printascii)
+ mov r1, r0
+ mov r0, #0x04 @ SYS_WRITE0
+ ARM( svc #0x123456 )
+ THUMB( svc #0xab )
+ mov pc, lr
+ENDPROC(printascii)
+
+ENTRY(printch)
+ adr r1, hexbuf
+ strb r0, [r1]
+ mov r0, #0x03 @ SYS_WRITEC
+ ARM( svc #0x123456 )
+ THUMB( svc #0xab )
+ mov pc, lr
+ENDPROC(printch)
+
+ENTRY(debug_ll_addr)
+ mov r2, #0
+ str r2, [r0]
+ str r2, [r1]
+ mov pc, lr
+ENDPROC(debug_ll_addr)
+
+#endif
uint32_t *hibernate_magic = 0;
SSYNC();
+ /* cppcheck-suppress nullPointer */
if (hibernate_magic[0] == 0xDEADBEEF) {
serial_putc('c');
bfin_write_EVT15(hibernate_magic[1]);
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_CPU CONFIG_BFIN_CPU
+
#endif
config TARGET_JUPITER
bool "Support jupiter"
-config TARGET_MCC200
- bool "Support mcc200"
-
config TARGET_MOTIONPRO
bool "Support motionpro"
source "board/manroland/hmi1001/Kconfig"
source "board/manroland/mucmc52/Kconfig"
source "board/manroland/uc101/Kconfig"
-source "board/mcc200/Kconfig"
source "board/motionpro/Kconfig"
source "board/munices/Kconfig"
source "board/phytec/pcm030/Kconfig"
bl cpu_init_f
/* run 1st part of board init code (in Flash)*/
+ li r3, 0 /* clear boot_flag for calling board_init_f */
bl board_init_f
/* NOTREACHED - board_init_f() does not return */
SET_SDHC_LIODN(1, 552),
- SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+ SET_USB_LIODN(1, "fsl-usb2-dr", 553),
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
#endif
/* Change flash's physical address */
- out_be32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0);
- out_be32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
- out_be32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
+ ifc_out32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0);
+ ifc_out32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
+ ifc_out32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
return ;
}
setup_ifc_sram = (void *)SRAM_BASE_ADDR;
dst = (u32 *) SRAM_BASE_ADDR;
src = (u32 *) setup_ifc;
- for (i = 0; i < 1024; i++)
+ for (i = 0; i < 1024; i++) {
+ /* cppcheck-suppress nullPointer */
*dst++ = *src++;
+ }
+ /* cppcheck-suppress nullPointer */
setup_ifc_sram();
/* CLEANUP */
#endif
#if defined(CONFIG_FSL_IFC)
- ccr = in_be32(&ifc_regs->ifc_ccr);
+ ccr = ifc_in32(&ifc_regs->ifc_ccr);
ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
sys_info->freq_localbus = sys_info->freq_systembus / ccr;
#define MEMAC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */
#define MEMAC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */
#define MEMAC_CMD_CFG_RXTX_EN (MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN)
+#define MEMAC_CMD_CFG_NO_LEN_CHK 0x20000 /* Payload length check disable */
/* HASHTABLE_CTRL - Hashtable control register */
#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */
#define MDIO_STAT_PRE (1 << 5)
#define MDIO_STAT_ENC (1 << 6)
#define MDIO_STAT_HOLD_15_CLK (7 << 2)
+#define MDIO_STAT_NEG (1 << 23)
#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f)
#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5)
#define IIC_EXTSTS_XFRA 0x01
#define IIC_EXTSTS_ICT 0x02
#define IIC_EXTSTS_LA 0x04
+#define IIC_EXTSTS_BCS_MASK 0x70
+#define IIC_EXTSTS_BCS_FREE 0x40
/* XTCNTLSS Register Bit definition */
#define IIC_XTCNTLSS_SRST 0x01
#include <common.h>
#include <os.h>
+#include <cli.h>
#include <asm/getopt.h>
#include <asm/io.h>
#include <asm/sections.h>
/* Execute command if required */
if (state->cmd) {
+ cli_init();
+
run_command_list(state->cmd, -1, 0);
if (!state->interactive)
os_exit(state->exit_type);
bootargs = getenv("bootargs");
/* Clear zero page */
+ /* cppcheck-suppress nullPointer */
memset(param, 0, 0x1000);
/* Set commandline */
if TARGET_DB_MV784MP_GP
-config SYS_CPU
- string
- default "armv7"
-
config SYS_BOARD
- string
default "db-mv784mp-gp"
config SYS_VENDOR
- string
default "Marvell"
config SYS_SOC
- string
default "armada-xp"
config SYS_CONFIG_NAME
- string
default "db-mv784mp-gp"
endif
#include <asm/arch/reset_manager.h>
#include <asm/io.h>
+#include <usb.h>
+#include <usb/s3c_udc.h>
+#include <usb_mass_storage.h>
+
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+
+#ifdef CONFIG_USB_GADGET
+struct s3c_plat_otg_data socfpga_otg_data = {
+ .regs_otg = CONFIG_USB_DWC2_REG_ADDR,
+ .usb_gusbcfg = 0x1417,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ return s3c_udc_probe(&socfpga_otg_data);
+}
+
+int g_dnl_board_usb_cable_connected(void)
+{
+ return 1;
+}
+#endif
gpio_direction_input(IMX_GPIO_NR(4, 5));
ret = gpio_get_value(IMX_GPIO_NR(4, 5));
} else {
- gpio_direction_input(IMX_GPIO_NR(1, 4));
- ret = !gpio_get_value(IMX_GPIO_NR(1, 4));
+ gpio_direction_input(IMX_GPIO_NR(1, 5));
+ ret = !gpio_get_value(IMX_GPIO_NR(1, 5));
}
return ret;
void board_show_activity (ulong timestamp)
{
#ifdef CONFIG_STATUS_LED
- if ((timestamp % (CONFIG_SYS_HZ / 2) == 0)
+ if ((timestamp % (CONFIG_SYS_HZ / 2)) == 0)
lcd_heartbeat ();
#endif
}
#include <i2c.h>
#include <usb.h>
#include <mmc.h>
-#include <nand.h>
#include <twl4030.h>
-#include <bmp_layout.h>
#include <linux/compiler.h>
#include <asm/io.h>
+#include <asm/errno.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/ehci-omap.h>
#include <asm/gpio.h>
+#include "../common/common.h"
#include "../common/eeprom.h"
DECLARE_GLOBAL_DATA_PTR;
"NAND",
};
-static u32 gpmc_net_config[GPMC_MAX_REG] = {
- NET_GPMC_CONFIG1,
- NET_GPMC_CONFIG2,
- NET_GPMC_CONFIG3,
- NET_GPMC_CONFIG4,
- NET_GPMC_CONFIG5,
- NET_GPMC_CONFIG6,
- 0
-};
-
-#ifdef CONFIG_LCD
-#ifdef CONFIG_CMD_NAND
-static int splash_load_from_nand(u32 bmp_load_addr)
-{
- struct bmp_header *bmp_hdr;
- int res, splash_screen_nand_offset = 0x100000;
- size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
-
- if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
- goto splash_address_too_high;
-
- res = nand_read_skip_bad(&nand_info[nand_curr_device],
- splash_screen_nand_offset, &bmp_header_size,
- NULL, nand_info[nand_curr_device].size,
- (u_char *)bmp_load_addr);
- if (res < 0)
- return res;
-
- bmp_hdr = (struct bmp_header *)bmp_load_addr;
- bmp_size = le32_to_cpu(bmp_hdr->file_size);
-
- if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
- goto splash_address_too_high;
-
- return nand_read_skip_bad(&nand_info[nand_curr_device],
- splash_screen_nand_offset, &bmp_size,
- NULL, nand_info[nand_curr_device].size,
- (u_char *)bmp_load_addr);
-
-splash_address_too_high:
- printf("Error: splashimage address too high. Data overwrites U-Boot "
- "and/or placed beyond DRAM boundaries.\n");
-
- return -1;
-}
-#else
-static inline int splash_load_from_nand(void)
-{
- return -1;
-}
-#endif /* CONFIG_CMD_NAND */
-
#ifdef CONFIG_SPL_BUILD
/*
* Routine: get_board_mem_timings
}
#endif
+#define CM_T35_SPLASH_NAND_OFFSET 0x100000
+
int splash_screen_prepare(void)
{
- char *env_splashimage_value;
- u32 bmp_load_addr;
-
- env_splashimage_value = getenv("splashimage");
- if (env_splashimage_value == NULL)
- return -1;
-
- bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
- if (bmp_load_addr == 0) {
- printf("Error: bad splashimage address specified\n");
- return -1;
- }
-
- return splash_load_from_nand(bmp_load_addr);
+ return cl_splash_screen_prepare(CM_T35_SPLASH_NAND_OFFSET);
}
-#endif /* CONFIG_LCD */
/*
* Routine: board_init
return 0;
}
-static u32 cm_t3x_rev;
-
/*
* Routine: get_board_rev
* Description: read system revision
*/
u32 get_board_rev(void)
{
- if (!cm_t3x_rev)
- cm_t3x_rev = cl_eeprom_get_board_rev();
-
- return cm_t3x_rev;
+ return cl_eeprom_get_board_rev();
};
-/*
- * Routine: misc_init_r
- * Description: display die ID
- */
int misc_init_r(void)
{
- u32 board_rev = get_board_rev();
- u32 rev_major = board_rev / 100;
- u32 rev_minor = board_rev - (rev_major * 100);
-
- if ((rev_minor / 10) * 10 == rev_minor)
- rev_minor = rev_minor / 10;
-
- printf("PCB: %u.%u\n", rev_major, rev_minor);
+ cl_print_pcb_info();
dieid_num_r();
return 0;
}
#endif
-/*
- * Routine: setup_net_chip_gmpc
- * Description: Setting up the configuration GPMC registers specific to the
- * Ethernet hardware.
- */
-static void setup_net_chip_gmpc(void)
-{
- struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
- enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
- CM_T3X_SMC911X_BASE, GPMC_SIZE_16M);
- enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
- SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
-
- /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
- writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
-
- /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
-
- /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
- &ctrl_base->gpmc_nadv_ale);
-}
-
#ifdef CONFIG_SYS_I2C_OMAP34XX
/*
* Routine: reset_net_chip
* Description: reset the Ethernet controller via TPS65930 GPIO
*/
-static void reset_net_chip(void)
+static int cm_t3x_reset_net_chip(int gpio)
{
/* Set GPIO1 of TPS65930 as output */
twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x03,
twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C,
0x02);
mdelay(1);
+ return 0;
}
#else
-static inline void reset_net_chip(void) {}
+static inline int cm_t3x_reset_net_chip(int gpio) { return 0; }
#endif
#ifdef CONFIG_SMC911X
return eth_setenv_enetaddr("ethaddr", enetaddr);
}
-
/*
* Routine: board_eth_init
* Description: initialize module and base-board Ethernet chips
{
int rc = 0, rc1 = 0;
- setup_net_chip_gmpc();
- reset_net_chip();
-
rc1 = handle_mac_address();
if (rc1)
printf("No MAC address found! ");
- rc1 = smc911x_initialize(0, CM_T3X_SMC911X_BASE);
+ rc1 = cl_omap3_smc911x_init(0, 5, CM_T3X_SMC911X_BASE,
+ cm_t3x_reset_net_chip, -EINVAL);
if (rc1 > 0)
rc++;
- rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
+ rc1 = cl_omap3_smc911x_init(1, 4, SB_T35_SMC911X_BASE, NULL, -EINVAL);
if (rc1 > 0)
rc++;
}
#endif
-void __weak get_board_serial(struct tag_serialnr *serialnr)
-{
- /*
- * This corresponds to what happens when we can communicate with the
- * eeprom but don't get a valid board serial value.
- */
- serialnr->low = 0;
- serialnr->high = 0;
-};
-
#ifdef CONFIG_USB_EHCI_OMAP
struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#define SB_T35_USB_HUB_RESET_GPIO 167
int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
u8 val;
int offset;
- if (gpio_request(SB_T35_USB_HUB_RESET_GPIO, "SB-T35 usb hub reset")) {
- printf("Error: can't obtain GPIO %d for SB-T35 usb hub reset",
- SB_T35_USB_HUB_RESET_GPIO);
- return -1;
- }
-
- gpio_direction_output(SB_T35_USB_HUB_RESET_GPIO, 0);
- udelay(10);
- gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
- udelay(1000);
+ cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst");
offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1;
twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val);
int ehci_hcd_stop(void)
{
+ cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO);
return omap_ehci_hcd_stop();
}
#endif /* CONFIG_USB_EHCI_OMAP */
--- /dev/null
+if TARGET_CM_T3517
+
+config SYS_BOARD
+ default "cm_t3517"
+
+config SYS_VENDOR
+ default "compulab"
+
+config SYS_CONFIG_NAME
+ default "cm_t3517"
+
+endif
--- /dev/null
+CM_T3517 BOARD
+M: Igor Grinberg <grinberg@compulab.co.il>
+S: Maintained
+F: board/compulab/cm_t3517/
+F: include/configs/cm_t3517.h
+F: configs/cm_t3517_defconfig
--- /dev/null
+#
+# (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+#
+# Authors: Igor Grinberg <grinberg@compulab.co.il>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += cm_t3517.o mux.o
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <status_led.h>
+#include <net.h>
+#include <netdev.h>
+#include <usb.h>
+#include <mmc.h>
+#include <linux/compiler.h>
+#include <linux/usb/musb.h>
+
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/am35x_def.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/musb.h>
+#include <asm/omap_musb.h>
+#include <asm/ehci-omap.h>
+
+#include "../common/common.h"
+#include "../common/eeprom.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "CM-T3517 board",
+ "NAND 128/512M",
+};
+
+#ifdef CONFIG_USB_MUSB_AM35X
+static struct musb_hdrc_config cm_t3517_musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 16,
+ .ram_bits = 12,
+};
+
+static struct omap_musb_board_data cm_t3517_musb_board_data = {
+ .set_phy_power = am35x_musb_phy_power,
+ .clear_irq = am35x_musb_clear_irq,
+ .reset = am35x_musb_reset,
+};
+
+static struct musb_hdrc_platform_data cm_t3517_musb_pdata = {
+#if defined(CONFIG_MUSB_HOST)
+ .mode = MUSB_HOST,
+#elif defined(CONFIG_MUSB_GADGET)
+ .mode = MUSB_PERIPHERAL,
+#else
+#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#endif
+ .config = &cm_t3517_musb_config,
+ .power = 250,
+ .platform_ops = &am35x_ops,
+ .board_data = &cm_t3517_musb_board_data,
+};
+
+static void cm_t3517_musb_init(void)
+{
+ /*
+ * Set up USB clock/mode in the DEVCONF2 register.
+ * USB2.0 PHY reference clock is 13 MHz
+ */
+ clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+ CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE,
+ CONF2_REFFREQ_13MHZ | CONF2_SESENDEN |
+ CONF2_VBDTCTEN | CONF2_DATPOL);
+
+ if (musb_register(&cm_t3517_musb_pdata, &cm_t3517_musb_board_data,
+ (void *)AM35XX_IPSS_USBOTGSS_BASE))
+ printf("Failed initializing AM35x MUSB!\n");
+}
+#else
+static inline void am3517_evm_musb_init(void) {}
+#endif
+
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+#endif
+
+ cm_t3517_musb_init();
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ cl_print_pcb_info();
+ dieid_num_r();
+
+ return 0;
+}
+
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#define SB_T35_CD_GPIO 144
+#define SB_T35_WP_GPIO 59
+
+int board_mmc_init(bd_t *bis)
+{
+ return omap_mmc_init(0, 0, 0, SB_T35_CD_GPIO, SB_T35_WP_GPIO);
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+#define CONTROL_EFUSE_EMAC_LSB 0x48002380
+#define CONTROL_EFUSE_EMAC_MSB 0x48002384
+
+static int am3517_get_efuse_enetaddr(u8 *enetaddr)
+{
+ u32 lsb = __raw_readl(CONTROL_EFUSE_EMAC_LSB);
+ u32 msb = __raw_readl(CONTROL_EFUSE_EMAC_MSB);
+
+ enetaddr[0] = (u8)((msb >> 16) & 0xff);
+ enetaddr[1] = (u8)((msb >> 8) & 0xff);
+ enetaddr[2] = (u8)(msb & 0xff);
+ enetaddr[3] = (u8)((lsb >> 16) & 0xff);
+ enetaddr[4] = (u8)((lsb >> 8) & 0xff);
+ enetaddr[5] = (u8)(lsb & 0xff);
+
+ return is_valid_ether_addr(enetaddr);
+}
+
+static inline int cm_t3517_init_emac(bd_t *bis)
+{
+ int ret = cpu_eth_init(bis);
+
+ if (ret > 0)
+ return ret;
+
+ printf("Failed initializing EMAC! ");
+ return 0;
+}
+#else /* !CONFIG_DRIVER_TI_EMAC */
+static inline int am3517_get_efuse_enetaddr(u8 *enetaddr) { return 1; }
+static inline int cm_t3517_init_emac(bd_t *bis) { return 0; }
+#endif /* CONFIG_DRIVER_TI_EMAC */
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int cm_t3517_handle_mac_address(void)
+{
+ unsigned char enetaddr[6];
+ int ret;
+
+ ret = eth_getenv_enetaddr("ethaddr", enetaddr);
+ if (ret)
+ return 0;
+
+ ret = cl_eeprom_read_mac_addr(enetaddr);
+ if (ret) {
+ ret = am3517_get_efuse_enetaddr(enetaddr);
+ if (ret)
+ return ret;
+ }
+
+ if (!is_valid_ether_addr(enetaddr))
+ return -1;
+
+ return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+#define SB_T35_ETH_RST_GPIO 164
+
+/*
+ * Routine: board_eth_init
+ * Description: initialize module and base-board Ethernet chips
+ */
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0, rc1 = 0;
+
+ rc1 = cm_t3517_handle_mac_address();
+ if (rc1)
+ printf("No MAC address found! ");
+
+ rc1 = cm_t3517_init_emac(bis);
+ if (rc1 > 0)
+ rc++;
+
+ rc1 = cl_omap3_smc911x_init(0, 4, CONFIG_SMC911X_BASE,
+ NULL, SB_T35_ETH_RST_GPIO);
+ if (rc1 > 0)
+ rc++;
+
+ return rc;
+}
+
+#ifdef CONFIG_USB_EHCI_OMAP
+static struct omap_usbhs_board_data cm_t3517_usbhs_bdata = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+};
+
+#define CM_T3517_USB_HUB_RESET_GPIO 152
+#define SB_T35_USB_HUB_RESET_GPIO 98
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ cl_usb_hub_init(CM_T3517_USB_HUB_RESET_GPIO, "cm-t3517 hub rst");
+ cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst");
+
+ return omap_ehci_hcd_init(index, &cm_t3517_usbhs_bdata, hccr, hcor);
+}
+
+int ehci_hcd_stop(void)
+{
+ cl_usb_hub_deinit(CM_T3517_USB_HUB_RESET_GPIO);
+ cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO);
+
+ return omap_ehci_hcd_stop();
+}
+#endif /* CONFIG_USB_EHCI_OMAP */
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+
+void set_muxconf_regs(void)
+{
+ /* SDRC */
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7));
+
+ /* GPMC */
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0));
+
+ /* SB-T35 Ethernet */
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0));
+ /* DVI enable */
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPIO_54*/
+ /* DataImage backlight */
+ MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | DIS | M4));/*GPIO_58*/
+
+ /* SB-T35 SD/MMC WP GPIO59 */
+ MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M4)); /*GPIO_59*/
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0));
+ /* SB-T35 Audio Enable GPIO61 */
+ MUX_VAL(CP(GPMC_NBE1), (IDIS | PTU | EN | M4)); /*GPIO_61*/
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0));
+ /* SB-T35 Ethernet IRQ GPIO65 */
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)); /*GPIO_65*/
+
+ /* UART3 Console */
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0));
+ /* RTC V3020 nCS GPIO163 */
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | EN | M4)); /*GPIO_163*/
+ /* SB-T35 Ethernet nRESET GPIO164 */
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)); /*GPIO_164*/
+
+ /* SB-T35 SD/MMC CD GPIO144 */
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)); /*GPIO_144*/
+ /* WIFI nRESET GPIO145 */
+ MUX_VAL(CP(UART2_RTS), (IEN | PTD | EN | M4)); /*GPIO_145*/
+ /* USB1 PHY Reset GPIO 146 */
+ MUX_VAL(CP(UART2_TX), (IEN | PTD | EN | M4)); /*GPIO_146*/
+ /* USB2 PHY Reset GPIO 147 */
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)); /*GPIO_147*/
+
+ /* MMC1 */
+ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0));
+
+ /* DSS */
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0));
+
+ /* I2C */
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0));
+
+ /* SB-T35 USB HUB Reset GPIO98 */
+ MUX_VAL(CP(CCDC_WEN), (IDIS | PTU | EN | M4)); /*GPIO_98*/
+ /* CM-T3517 USB HUB Reset GPIO152 */
+ MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)); /*GPIO_152*/
+
+ /* RMII */
+ MUX_VAL(CP(RMII_MDIO_DATA), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(RMII_MDIO_CLK), (M0));
+ MUX_VAL(CP(RMII_RXD0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_RXD1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_RXER), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_TXD0), (IDIS | M0));
+ MUX_VAL(CP(RMII_TXD1), (IDIS | M0));
+ MUX_VAL(CP(RMII_TXEN), (IDIS | M0));
+ MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTU | DIS | M0));
+
+ /* Green LED GPIO186 */
+ MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*GPIO_186*/
+
+ /* SPI */
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/
+ MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTU | EN | M1)); /*MCSPI4_CS0*/
+ /* LCD reset GPIO157 */
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)); /*GPIO_157*/
+
+ /* RTC V3020 CS Enable GPIO160 */
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTD | EN | M4)); /*GPIO_160*/
+ /* SB-T35 LVDS Transmitter SHDN GPIO162 */
+ MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | DIS | M4)); /*GPIO_162*/
+
+ /* USB0 - mUSB */
+ MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0));
+ /* USB1 EHCI */
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT0*/
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT1*/
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT2*/
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT3*/
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT4*/
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT5*/
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT6*/
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT7*/
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DIR*/
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_NXT*/
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/
+ /* USB2 EHCI */
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT0*/
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT1*/
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)); /*HSUSB2_DT2*/
+ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)); /*HSUSB2_DT3*/
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)); /*HSUSB2_DT4*/
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)); /*HSUSB2_DT5*/
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)); /*HSUSB2_DT6*/
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)); /*HSUSB2_DT7*/
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DIR*/
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_NXT*/
+ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/
+ MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/
+
+ /* SYS_BOOT */
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTU | DIS | M4)); /*GPIO_2*/
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTU | DIS | M4)); /*GPIO_3*/
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTU | DIS | M4)); /*GPIO_4*/
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTU | DIS | M4)); /*GPIO_5*/
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTU | DIS | M4)); /*GPIO_6*/
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTU | DIS | M4)); /*GPIO_7*/
+}
#define SB_T54_CD_GPIO 228
#define SB_T54_WP_GPIO 229
-int board_mmc_getcd(struct mmc *mmc)
-{
- return !gpio_get_value(SB_T54_CD_GPIO);
-}
-
int board_mmc_init(bd_t *bis)
{
int ret0, ret1;
- ret0 = omap_mmc_init(0, 0, 0, -1, SB_T54_WP_GPIO);
+ ret0 = omap_mmc_init(0, 0, 0, SB_T54_CD_GPIO, SB_T54_WP_GPIO);
if (ret0)
printf("cm_t54: failed to initialize mmc0\n");
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_SYS_I2C) += eeprom.o
-obj-$(CONFIG_LCD) += omap3_display.o
+obj-y += common.o
+obj-$(CONFIG_SYS_I2C) += eeprom.o
+obj-$(CONFIG_LCD) += omap3_display.o
+obj-$(CONFIG_SPLASH_SCREEN) += splash.o
+obj-$(CONFIG_SMC911X) += omap3_smc911x.o
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/bootm.h>
+#include <asm/gpio.h>
+
+#include "common.h"
+#include "eeprom.h"
+
+void cl_print_pcb_info(void)
+{
+ u32 board_rev = get_board_rev();
+ u32 rev_major = board_rev / 100;
+ u32 rev_minor = board_rev - (rev_major * 100);
+
+ if ((rev_minor / 10) * 10 == rev_minor)
+ rev_minor = rev_minor / 10;
+
+ printf("PCB: %u.%u\n", rev_major, rev_minor);
+}
+
+#ifdef CONFIG_SERIAL_TAG
+void __weak get_board_serial(struct tag_serialnr *serialnr)
+{
+ /*
+ * This corresponds to what happens when we can communicate with the
+ * eeprom but don't get a valid board serial value.
+ */
+ serialnr->low = 0;
+ serialnr->high = 0;
+};
+#endif
+
+#ifdef CONFIG_CMD_USB
+int cl_usb_hub_init(int gpio, const char *label)
+{
+ if (gpio_request(gpio, label)) {
+ printf("Error: can't obtain GPIO%d for %s", gpio, label);
+ return -1;
+ }
+
+ gpio_direction_output(gpio, 0);
+ udelay(10);
+ gpio_set_value(gpio, 1);
+ udelay(1000);
+ return 0;
+}
+
+void cl_usb_hub_deinit(int gpio)
+{
+ gpio_free(gpio);
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CL_COMMON_
+#define _CL_COMMON_
+
+#include <asm/errno.h>
+
+void cl_print_pcb_info(void);
+
+#ifdef CONFIG_CMD_USB
+int cl_usb_hub_init(int gpio, const char *label);
+void cl_usb_hub_deinit(int gpio);
+#else /* !CONFIG_CMD_USB */
+static inline int cl_usb_hub_init(int gpio, const char *label)
+{
+ return -ENOSYS;
+}
+static inline void cl_usb_hub_deinit(int gpio) {}
+#endif /* CONFIG_CMD_USB */
+
+#ifdef CONFIG_SPLASH_SCREEN
+int cl_splash_screen_prepare(int nand_offset);
+#else /* !CONFIG_SPLASH_SCREEN */
+static inline int cl_splash_screen_prepare(int nand_offset)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_SPLASH_SCREEN */
+
+#ifdef CONFIG_SMC911X
+int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
+ int (*reset)(int), int rst_gpio);
+#else /* !CONFIG_SMC911X */
+static inline int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
+ int (*reset)(int), int rst_gpio)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_SMC911X */
+
+#endif /* _CL_COMMON_ */
return cl_eeprom_read(offset, buf, 6);
}
+static u32 board_rev;
+
/*
* Routine: cl_eeprom_get_board_rev
* Description: read system revision from eeprom
*/
u32 cl_eeprom_get_board_rev(void)
{
- u32 rev = 0;
char str[5]; /* Legacy representation can contain at most 4 digits */
uint offset = BOARD_REV_OFFSET_LEGACY;
+ if (board_rev)
+ return board_rev;
+
if (cl_eeprom_setup_layout())
return 0;
if (cl_eeprom_layout != LAYOUT_LEGACY)
offset = BOARD_REV_OFFSET;
- if (cl_eeprom_read(offset, (uchar *)&rev, BOARD_REV_SIZE))
+ if (cl_eeprom_read(offset, (uchar *)&board_rev, BOARD_REV_SIZE))
return 0;
/*
* representation. i.e. for rev 1.00: 0x100 --> 0x64
*/
if (cl_eeprom_layout == LAYOUT_LEGACY) {
- sprintf(str, "%x", rev);
- rev = simple_strtoul(str, NULL, 10);
+ sprintf(str, "%x", board_rev);
+ board_rev = simple_strtoul(str, NULL, 10);
}
- return rev;
+ return board_rev;
};
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+
+#include "common.h"
+
+static u32 cl_omap3_smc911x_gpmc_net_config[GPMC_MAX_REG] = {
+ NET_GPMC_CONFIG1,
+ NET_GPMC_CONFIG2,
+ NET_GPMC_CONFIG3,
+ NET_GPMC_CONFIG4,
+ NET_GPMC_CONFIG5,
+ NET_GPMC_CONFIG6,
+ 0
+};
+
+static void cl_omap3_smc911x_setup_net_chip_gmpc(int cs, u32 base_addr)
+{
+ struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+ enable_gpmc_cs_config(cl_omap3_smc911x_gpmc_net_config,
+ &gpmc_cfg->cs[cs], base_addr, GPMC_SIZE_16M);
+
+ /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+ writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
+
+ /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+
+ /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+ &ctrl_base->gpmc_nadv_ale);
+}
+
+#ifdef CONFIG_OMAP_GPIO
+static int cl_omap3_smc911x_reset_net_chip(int gpio)
+{
+ int err;
+
+ if (!gpio_is_valid(gpio))
+ return -EINVAL;
+
+ err = gpio_request(gpio, "eth rst");
+ if (err)
+ return err;
+
+ /* Set gpio as output and send a pulse */
+ gpio_direction_output(gpio, 1);
+ udelay(1);
+ gpio_set_value(gpio, 0);
+ mdelay(40);
+ gpio_set_value(gpio, 1);
+ mdelay(1);
+
+ return 0;
+}
+#else /* !CONFIG_OMAP_GPIO */
+static inline int cl_omap3_smc911x_reset_net_chip(int gpio) { return 0; }
+#endif /* CONFIG_OMAP_GPIO */
+
+int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
+ int (*reset)(int), int rst_gpio)
+{
+ int ret;
+
+ cl_omap3_smc911x_setup_net_chip_gmpc(cs, base_addr);
+
+ if (reset)
+ reset(rst_gpio);
+ else
+ cl_omap3_smc911x_reset_net_chip(rst_gpio);
+
+ ret = smc911x_initialize(id, base_addr);
+ if (ret > 0)
+ return ret;
+
+ printf("Failed initializing SMC911x! ");
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <bmp_layout.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static int splash_load_from_nand(u32 bmp_load_addr, int nand_offset)
+{
+ struct bmp_header *bmp_hdr;
+ int res;
+ size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
+
+ if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
+ goto splash_address_too_high;
+
+ res = nand_read_skip_bad(&nand_info[nand_curr_device],
+ nand_offset, &bmp_header_size,
+ NULL, nand_info[nand_curr_device].size,
+ (u_char *)bmp_load_addr);
+ if (res < 0)
+ return res;
+
+ bmp_hdr = (struct bmp_header *)bmp_load_addr;
+ bmp_size = le32_to_cpu(bmp_hdr->file_size);
+
+ if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
+ goto splash_address_too_high;
+
+ return nand_read_skip_bad(&nand_info[nand_curr_device],
+ nand_offset, &bmp_size,
+ NULL, nand_info[nand_curr_device].size,
+ (u_char *)bmp_load_addr);
+
+splash_address_too_high:
+ printf("Error: splashimage address too high. Data overwrites U-Boot "
+ "and/or placed beyond DRAM boundaries.\n");
+
+ return -1;
+}
+#else
+static inline int splash_load_from_nand(u32 bmp_load_addr, int nand_offset)
+{
+ return -1;
+}
+#endif /* CONFIG_CMD_NAND */
+
+int cl_splash_screen_prepare(int nand_offset)
+{
+ char *env_splashimage_value;
+ u32 bmp_load_addr;
+
+ env_splashimage_value = getenv("splashimage");
+ if (env_splashimage_value == NULL)
+ return -1;
+
+ bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
+ if (bmp_load_addr == 0) {
+ printf("Error: bad splashimage address specified\n");
+ return -1;
+ }
+
+ return splash_load_from_nand(bmp_load_addr, nand_offset);
+}
{
block_dev_desc_t *stor_dev = NULL;
long sz;
- int i, res, cnt, old_ctrlc;
+ int i, res, old_ctrlc;
char buffer[32];
char str[80];
int n;
clear_ctrlc ();
break;
}
- cnt++;
} while (res < 0);
}
*/
int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- unsigned int *ptr = 0;
+ unsigned int *ptr;
int count = 0;
int count2 = 0;
int i;
* Mark sync address
*/
ptr = 0;
+ /* cppcheck-suppress nullPointer */
*ptr = 0xffffffff;
puts("\nWaiting for image from pci host -");
/*
* Wait for host to write the start address
*/
+ /* cppcheck-suppress nullPointer */
while (*ptr == 0xffffffff) {
count++;
if (!(count % 100)) {
#include <fdt_support.h>
#include <fsl_mdio.h>
#include <tsec.h>
+#include <jffs2/load_kernel.h>
+#include <mtd_node.h>
+#include <flash.h>
#include <netdev.h>
}
#if defined(CONFIG_OF_BOARD_SETUP)
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+struct node_info nodes[] = {
+ { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
+};
+#endif
void ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
size = getenv_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+ fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+#endif
fdt_fixup_dr_usb(blob, bd);
}
#include <hwconfig.h>
#include <i2c.h>
#include <fsl_ddr_sdram.h>
+#include <jffs2/load_kernel.h>
+#include <mtd_node.h>
+#include <flash.h>
#ifdef CONFIG_PCI
#include <pci.h>
}
#if defined(CONFIG_OF_BOARD_SETUP)
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+struct node_info nodes[] = {
+ { "cfi-flash", MTD_DEV_TYPE_NOR, },
+ { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
+};
+#endif
void ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
#endif
fdt_fixup_memory(blob, (u64)base, (u64)size);
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+ fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+#endif
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 porbmsr = in_be32(&gur->porbmsr);
FREESCALE MX28EVK
==================
-Supported hardware: only MX28EVK rev D is supported in U-boot.
+Supported hardware: MX28EVK rev C and D are supported in U-boot.
Files of the MX28EVK port
--------------------------
if (!p)
return -ENODEV;
+ setenv("fdt_file", "imx53-qsb.dtb");
+
/* Set VDDA to 1.25V */
val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val);
if (!p)
return -ENODEV;
+ setenv("fdt_file", "imx53-qsrb.dtb");
+
/* Set VDDGP to 1.25V for 1GHz on SW1 */
pmic_reg_read(p, REG_SW_0, &val);
val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_250V_MC34708;
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
+ PAD_CTL_SRE_FAST)
+#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
+
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
int dram_init(void)
}
#endif
+#ifdef CONFIG_NAND_MXS
+static iomux_v3_cfg_t gpmi_pads[] = {
+ MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL0),
+ MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+ MX6_PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(GPMI_PAD_CTRL1),
+};
+
+static void setup_gpmi_nand(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ /* config gpmi nand iomux */
+ imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
+
+ /* gate ENFC_CLK_ROOT clock first,before clk source switch */
+ clrbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
+ clrbits_le32(&mxc_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK);
+
+ /* config gpmi and bch clock to 100 MHz */
+ clrsetbits_le32(&mxc_ccm->cs2cdr,
+ MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
+ MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
+ MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
+ MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
+ MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
+
+ /* enable ENFC_CLK_ROOT clock */
+ setbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK);
+
+ /* enable gpmi and bch clock gating */
+ setbits_le32(&mxc_ccm->CCGR4,
+ MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+ MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+ MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
+
+ /* enable apbh clock gating */
+ setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
+}
+#endif
+
int mx6_rgmii_rework(struct phy_device *phydev)
{
unsigned short val;
#ifdef CONFIG_VIDEO_IPUV3
setup_display();
#endif
+
+#ifdef CONFIG_NAND_MXS
+ setup_gpmi_nand();
+#endif
return 0;
}
#include <i2c.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
+#include <asm/arch/mx6-ddr.h>
+
DECLARE_GLOBAL_DATA_PTR;
+#define BOOT_CFG 0x020D8004
+
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
int dram_init(void)
{
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
-
+ gd->ram_size = imx_ddr_size();
return 0;
}
-iomux_v3_cfg_t const uart1_pads[] = {
+static iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-iomux_v3_cfg_t const enet_pads[] = {
+static iomux_v3_cfg_t const enet_pads[] = {
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
gpio_set_value(IMX_GPIO_NR(1, 25), 1);
}
-iomux_v3_cfg_t const usdhc2_pads[] = {
+static iomux_v3_cfg_t const usdhc2_pads[] = {
MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
-iomux_v3_cfg_t const usdhc3_pads[] = {
+static iomux_v3_cfg_t const usdhc3_pads[] = {
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
-iomux_v3_cfg_t const usdhc4_pads[] = {
+static iomux_v3_cfg_t const usdhc4_pads[] = {
MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
-iomux_v3_cfg_t const ecspi1_pads[] = {
+static iomux_v3_cfg_t const ecspi1_pads[] = {
MX6_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
int board_mmc_init(bd_t *bis)
{
- s32 status = 0;
+#ifndef CONFIG_SPL_BUILD
+ int ret;
int i;
/*
printf("Warning: you configured more USDHC controllers"
"(%d) then supported by the board (%d)\n",
i + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return status;
+ return -EINVAL;
}
- status |= fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ if (ret)
+ return ret;
}
- return status;
+ return 0;
+#else
+ unsigned reg = readl(BOOT_CFG) >> 11;
+ /*
+ * Upon reading BOOT_CFG register the following map is done:
+ * Bit 11 and 12 of BOOT_CFG register can determine the current
+ * mmc port
+ * 0x1 SD1
+ * 0x2 SD2
+ * 0x3 SD4
+ */
+
+ switch (reg & 0x3) {
+ case 0x1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ case 0x2:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ case 0x3:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
+ break;
+ }
+
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+#endif
}
#endif
puts("Board: MX6-SabreSD\n");
return 0;
}
+
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+#include <libfdt.h>
+
+const struct mx6dq_iomux_ddr_regs mx6_ddr_ioregs = {
+ .dram_sdclk_0 = 0x00020030,
+ .dram_sdclk_1 = 0x00020030,
+ .dram_cas = 0x00020030,
+ .dram_ras = 0x00020030,
+ .dram_reset = 0x00020030,
+ .dram_sdcke0 = 0x00003000,
+ .dram_sdcke1 = 0x00003000,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdodt0 = 0x00003030,
+ .dram_sdodt1 = 0x00003030,
+ .dram_sdqs0 = 0x00000030,
+ .dram_sdqs1 = 0x00000030,
+ .dram_sdqs2 = 0x00000030,
+ .dram_sdqs3 = 0x00000030,
+ .dram_sdqs4 = 0x00000030,
+ .dram_sdqs5 = 0x00000030,
+ .dram_sdqs6 = 0x00000030,
+ .dram_sdqs7 = 0x00000030,
+ .dram_dqm0 = 0x00020030,
+ .dram_dqm1 = 0x00020030,
+ .dram_dqm2 = 0x00020030,
+ .dram_dqm3 = 0x00020030,
+ .dram_dqm4 = 0x00020030,
+ .dram_dqm5 = 0x00020030,
+ .dram_dqm6 = 0x00020030,
+ .dram_dqm7 = 0x00020030,
+};
+
+const struct mx6dq_iomux_grp_regs mx6_grp_ioregs = {
+ .grp_ddr_type = 0x000C0000,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_ddrpke = 0x00000000,
+ .grp_addds = 0x00000030,
+ .grp_ctlds = 0x00000030,
+ .grp_ddrmode = 0x00020000,
+ .grp_b0ds = 0x00000030,
+ .grp_b1ds = 0x00000030,
+ .grp_b2ds = 0x00000030,
+ .grp_b3ds = 0x00000030,
+ .grp_b4ds = 0x00000030,
+ .grp_b5ds = 0x00000030,
+ .grp_b6ds = 0x00000030,
+ .grp_b7ds = 0x00000030,
+};
+
+const struct mx6_mmdc_calibration mx6_mmcd_calib = {
+ .p0_mpwldectrl0 = 0x001F001F,
+ .p0_mpwldectrl1 = 0x001F001F,
+ .p1_mpwldectrl0 = 0x00440044,
+ .p1_mpwldectrl1 = 0x00440044,
+ .p0_mpdgctrl0 = 0x434B0350,
+ .p0_mpdgctrl1 = 0x034C0359,
+ .p1_mpdgctrl0 = 0x434B0350,
+ .p1_mpdgctrl1 = 0x03650348,
+ .p0_mprddlctl = 0x4436383B,
+ .p1_mprddlctl = 0x39393341,
+ .p0_mpwrdlctl = 0x35373933,
+ .p1_mpwrdlctl = 0x48254A36,
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+ .mem_speed = 1600,
+ .density = 4,
+ .width = 64,
+ .banks = 8,
+ .rowaddr = 14,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+};
+
+/*
+ * This section require the differentiation
+ * between iMX6 Sabre Families.
+ * But for now, it will configure only for
+ * SabreSD.
+ */
+static void spl_dram_init(void)
+{
+ struct mx6_ddr_sysinfo sysinfo = {
+ /* width of data bus:0=16,1=32,2=64 */
+ .dsize = mem_ddr.width/32,
+ /* config for full 4GB range so that get_mem_size() works */
+ .cs_density = 32, /* 32Gb per CS */
+ /* single chip select */
+ .ncs = 1,
+ .cs1_mirror = 0,
+ .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */
+#ifdef RTT_NOM_120OHM
+ .rtt_nom = 2 /*DDR3_RTT_120_OHM*/, /* RTT_Nom = RZQ/2 */
+#else
+ .rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */
+#endif
+ .walat = 1, /* Write additional latency */
+ .ralat = 5, /* Read additional latency */
+ .mif3_mode = 3, /* Command prediction working mode */
+ .bi_on = 1, /* Bank interleaving enabled */
+ .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
+ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
+ };
+
+ mx6dq_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+ mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr);
+}
+
+void board_init_f(ulong dummy)
+{
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ /* iomux and setup of i2c */
+ board_early_init_f();
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* load/boot image from boot device */
+ board_init_r(NULL, 0);
+}
+
+void reset_cpu(ulong addr)
+{
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+/* set the default clock gate to save power */
+DATA 4 0x020c4068 0x00C03F3F
+DATA 4 0x020c406c 0x0030FC03
+DATA 4 0x020c4070 0x0FFFC000
+DATA 4 0x020c4074 0x3FF00000
+DATA 4 0x020c4078 0x00FFF300
+DATA 4 0x020c407c 0x0F0000C3
+DATA 4 0x020c4080 0x000003FF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4 0x020e0010 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4 0x020e0018 0x007F007F
+DATA 4 0x020e001c 0x007F007F
+
+/*
+ * Setup CCM_CCOSR register as follows:
+ *
+ * cko1_en = 1 --> CKO1 enabled
+ * cko1_div = 111 --> divide by 8
+ * cko1_sel = 1011 --> ahb_clk_root
+ *
+ * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+ */
+DATA 4 0x020c4060 0x000000fb
#PBI commands
+#Software Workaround for errata A-007662 to train PCIe2 controller in Gen2 speed
+09250100 00000400
+09250108 00002000
+#Software Workaround for errata A-008007 to reset PVR register
+09000010 0000000b
+09000014 c0000000
+09000018 81d00017
+89020400 a1000000
+091380c0 000f0000
+89020400 00000000
#Initialize CPC1
09010000 00200400
09138000 00000000
#
obj-$(CONFIG_T4240RDB) += t4240rdb.o
+obj-y += cpld.o
obj-y += ddr.o
obj-y += eth.o
obj-$(CONFIG_PCI) += pci.o
--- /dev/null
+/**
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * This file provides support for the board-specific CPLD used on some Freescale
+ * reference boards.
+ *
+ * The following macros need to be defined:
+ *
+ * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the
+ * CPLD register map
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#include "cpld.h"
+
+u8 cpld_read(unsigned int reg)
+{
+ void *p = (void *)CONFIG_SYS_CPLD_BASE;
+
+ return in_8(p + reg);
+}
+
+void cpld_write(unsigned int reg, u8 value)
+{
+ void *p = (void *)CONFIG_SYS_CPLD_BASE;
+
+ out_8(p + reg, value);
+}
+
+/**
+ * Set the boot bank to the alternate bank
+ */
+void cpld_set_altbank(void)
+{
+ u8 val, curbank, altbank, override;
+
+ val = CPLD_READ(vbank);
+ curbank = val & CPLD_BANK_SEL_MASK;
+
+ switch (curbank) {
+ case CPLD_SELECT_BANK0:
+ altbank = CPLD_SELECT_BANK4;
+ CPLD_WRITE(vbank, altbank);
+ override = CPLD_READ(software_on);
+ CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN);
+ CPLD_WRITE(sys_reset, CPLD_SYSTEM_RESET);
+ break;
+ case CPLD_SELECT_BANK4:
+ altbank = CPLD_SELECT_BANK0;
+ CPLD_WRITE(vbank, altbank);
+ override = CPLD_READ(software_on);
+ CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN);
+ CPLD_WRITE(sys_reset, CPLD_SYSTEM_RESET);
+ break;
+ default:
+ printf("CPLD Altbank Fail: Invalid value!\n");
+ return;
+ }
+}
+
+/**
+ * Set the boot bank to the default bank
+ */
+void cpld_set_defbank(void)
+{
+ u8 val;
+
+ val = CPLD_DEFAULT_BANK;
+
+ CPLD_WRITE(global_reset, val);
+}
+
+#ifdef DEBUG
+static void cpld_dump_regs(void)
+{
+ printf("chip_id1 = 0x%02x\n", CPLD_READ(chip_id1));
+ printf("chip_id2 = 0x%02x\n", CPLD_READ(chip_id2));
+ printf("sw_maj_ver = 0x%02x\n", CPLD_READ(sw_maj_ver));
+ printf("sw_min_ver = 0x%02x\n", CPLD_READ(sw_min_ver));
+ printf("hw_ver = 0x%02x\n", CPLD_READ(hw_ver));
+ printf("software_on = 0x%02x\n", CPLD_READ(software_on));
+ printf("cfg_rcw_src = 0x%02x\n", CPLD_READ(cfg_rcw_src));
+ printf("res0 = 0x%02x\n", CPLD_READ(res0));
+ printf("vbank = 0x%02x\n", CPLD_READ(vbank));
+ printf("sw1_sysclk = 0x%02x\n", CPLD_READ(sw1_sysclk));
+ printf("sw2_status = 0x%02x\n", CPLD_READ(sw2_status));
+ printf("sw3_status = 0x%02x\n", CPLD_READ(sw3_status));
+ printf("sw4_status = 0x%02x\n", CPLD_READ(sw4_status));
+ printf("sys_reset = 0x%02x\n", CPLD_READ(sys_reset));
+ printf("global_reset = 0x%02x\n", CPLD_READ(global_reset));
+ printf("res1 = 0x%02x\n", CPLD_READ(res1));
+ putc('\n');
+}
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int rc = 0;
+
+ if (argc <= 1)
+ return cmd_usage(cmdtp);
+
+ if (strcmp(argv[1], "reset") == 0) {
+ if (strcmp(argv[2], "altbank") == 0)
+ cpld_set_altbank();
+ else
+ cpld_set_defbank();
+#ifdef DEBUG
+ } else if (strcmp(argv[1], "dump") == 0) {
+ cpld_dump_regs();
+#endif
+ } else
+ rc = cmd_usage(cmdtp);
+
+ return rc;
+}
+
+U_BOOT_CMD(
+ cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
+ "Reset the board or alternate bank",
+ "reset - reset to default bank\n"
+ "cpld reset altbank - reset to alternate bank\n"
+#ifdef DEBUG
+ "cpld dump - display the CPLD registers\n"
+#endif
+ );
+#endif
--- /dev/null
+/**
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * This file provides support for the ngPIXIS, a board-specific FPGA used on
+ * some Freescale reference boards.
+ */
+
+/*
+ * CPLD register set. Feel free to add board-specific #ifdefs where necessary.
+ */
+struct cpld_data {
+ u8 chip_id1; /* 0x00 - CPLD Chip ID1 Register */
+ u8 chip_id2; /* 0x01 - CPLD Chip ID2 Register */
+ u8 sw_maj_ver; /* 0x02 - CPLD Code Major Version Register */
+ u8 sw_min_ver; /* 0x03 - CPLD Code Minor Version Register */
+ u8 hw_ver; /* 0x04 - PCBA Version Register */
+ u8 software_on; /* 0x05 - Override Physical Switch Enable Register */
+ u8 cfg_rcw_src; /* 0x06 - RCW Source Location Control Register */
+ u8 res0; /* 0x07 - not used */
+ u8 vbank; /* 0x08 - Flash Bank Selection Control Register */
+ u8 sw1_sysclk; /* 0x09 - SW1 Status Read Back Register */
+ u8 sw2_status; /* 0x0a - SW2 Status Read Back Register */
+ u8 sw3_status; /* 0x0b - SW3 Status Read Back Register */
+ u8 sw4_status; /* 0x0c - SW4 Status Read Back Register */
+ u8 sys_reset; /* 0x0d - Reset System With Reserving Registers Value*/
+ u8 global_reset;/* 0x0e - Reset System With Default Registers Value */
+ u8 res1; /* 0x0f - not used */
+};
+
+#define CPLD_BANK_SEL_MASK 0x07
+#define CPLD_BANK_SEL_EN 0x04
+#define CPLD_SYSTEM_RESET 0x01
+#define CPLD_SELECT_BANK0 0x00
+#define CPLD_SELECT_BANK4 0x04
+#define CPLD_DEFAULT_BANK 0x01
+
+/* Pointer to the CPLD register set */
+
+u8 cpld_read(unsigned int reg);
+void cpld_write(unsigned int reg, u8 value);
+
+#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
+#define CPLD_WRITE(reg, value) \
+ cpld_write(offsetof(struct cpld_data, reg), value)
+
#ifdef CONFIG_SYS_QMAN_MEM_PHYS
SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
#endif
+#ifdef CONFIG_SYS_CPLD_BASE_PHYS
+ SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#endif
#ifdef CONFIG_SYS_DCSRBAR_PHYS
/* Limit DCSR to 32M to access NPC Trace Buffer */
SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
#include <fm_eth.h>
#include "t4rdb.h"
+#include "cpld.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
struct cpu_type *cpu = gd->arch.cpu;
+ u8 sw;
printf("Board: %sRDB, ", cpu->name);
+ printf("Board rev: 0x%02x CPLD ver: 0x%02x%02x, ",
+ CPLD_READ(hw_ver), CPLD_READ(sw_maj_ver), CPLD_READ(sw_min_ver));
+
+ sw = CPLD_READ(vbank);
+ sw = sw & CPLD_BANK_SEL_MASK;
+
+ if (sw <= 7)
+ printf("vBank: %d\n", sw);
+ else
+ printf("Unsupported Bank=%x\n", sw);
puts("SERDES Reference Clocks:\n");
printf(" SERDES1=100MHz SERDES2=156.25MHz\n"
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 16, BOOKE_PAGESZ_64K, 1),
#endif
+#ifdef CONFIG_SYS_CPLD_BASE
+ SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
+ MAS3_SW|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 17, BOOKE_PAGESZ_4K, 1),
+#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
testboot = (testpin != 0) && (s);
if (verbose) {
printf("testpin = %d\n", testpin);
+ /* cppcheck-suppress nullPointer */
printf("test_bank = %s\n", s ? s : "not set");
printf("boot test app : %s\n", (testboot) ? "yes" : "no");
}
if TARGET_KOSAGI_NOVENA
-config SYS_CPU
- default "armv7"
-
config SYS_BOARD
default "novena"
if (memcmp(&e.mac, "\0\0\0\0\0\0", 6) &&
memcmp(&e.mac, "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
- char ethaddr[9];
+ char ethaddr[18];
sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
e.mac[0],
if TARGET_MAXBCM
-config SYS_CPU
- string
- default "armv7"
-
config SYS_BOARD
- string
default "maxbcm"
config SYS_SOC
- string
default "armada-xp"
config SYS_CONFIG_NAME
- string
default "maxbcm"
endif
+++ /dev/null
-if TARGET_MCC200
-
-config SYS_BOARD
- default "mcc200"
-
-config SYS_CONFIG_NAME
- default "mcc200"
-
-endif
+++ /dev/null
-MCC200 BOARD
-#M: -
-S: Maintained
-F: board/mcc200/
-F: include/configs/mcc200.h
-F: configs/mcc200_defconfig
-F: configs/mcc200_COM12_defconfig
-F: configs/mcc200_COM12_highboot_defconfig
-F: configs/mcc200_COM12_highboot_SDRAM_defconfig
-F: configs/mcc200_COM12_SDRAM_defconfig
-F: configs/mcc200_highboot_defconfig
-F: configs/mcc200_highboot_SDRAM_defconfig
-F: configs/mcc200_SDRAM_defconfig
-F: configs/prs200_defconfig
-F: configs/prs200_DDR_defconfig
-F: configs/prs200_highboot_defconfig
-F: configs/prs200_highboot_DDR_defconfig
+++ /dev/null
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := mcc200.o lcd.o auto_update.o
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <image.h>
-#include <asm/byteorder.h>
-#include <usb.h>
-#include <part.h>
-
-#ifdef CONFIG_AUTO_UPDATE
-
-#ifndef CONFIG_USB_OHCI
-#error "must define CONFIG_USB_OHCI"
-#endif
-
-#ifndef CONFIG_USB_STORAGE
-#error "must define CONFIG_USB_STORAGE"
-#endif
-
-#ifndef CONFIG_SYS_HUSH_PARSER
-#error "must define CONFIG_SYS_HUSH_PARSER"
-#endif
-
-#if !defined(CONFIG_CMD_FAT)
-#error "must define CONFIG_CMD_FAT"
-#endif
-
-#undef AU_DEBUG
-
-#undef debug
-#ifdef AU_DEBUG
-#define debug(fmt,args...) printf (fmt ,##args)
-#else
-#define debug(fmt,args...)
-#endif /* AU_DEBUG */
-
-/* possible names of files on the USB stick. */
-#define AU_FIRMWARE "u-boot.img"
-#define AU_KERNEL "kernel.img"
-#define AU_ROOTFS "rootfs.img"
-
-struct flash_layout {
- long start;
- long end;
-};
-
-/* layout of the FLASH. ST = start address, ND = end address. */
-#define AU_FL_FIRMWARE_ST 0xfC000000
-#define AU_FL_FIRMWARE_ND 0xfC03FFFF
-#define AU_FL_KERNEL_ST 0xfC0C0000
-#define AU_FL_KERNEL_ND 0xfC1BFFFF
-#define AU_FL_ROOTFS_ST 0xFC1C0000
-#define AU_FL_ROOTFS_ND 0xFCFBFFFF
-
-static int au_usb_stor_curr_dev; /* current device */
-
-/* index of each file in the following arrays */
-#define IDX_FIRMWARE 0
-#define IDX_KERNEL 1
-#define IDX_ROOTFS 2
-
-/* max. number of files which could interest us */
-#define AU_MAXFILES 3
-
-/* pointers to file names */
-char *aufile[AU_MAXFILES] = {
- AU_FIRMWARE,
- AU_KERNEL,
- AU_ROOTFS
-};
-
-/* sizes of flash areas for each file */
-long ausize[AU_MAXFILES] = {
- (AU_FL_FIRMWARE_ND + 1) - AU_FL_FIRMWARE_ST,
- (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST,
- (AU_FL_ROOTFS_ND + 1) - AU_FL_ROOTFS_ST,
-};
-
-/* array of flash areas start and end addresses */
-struct flash_layout aufl_layout[AU_MAXFILES] = {
- { AU_FL_FIRMWARE_ST, AU_FL_FIRMWARE_ND, },
- { AU_FL_KERNEL_ST, AU_FL_KERNEL_ND, },
- { AU_FL_ROOTFS_ST, AU_FL_ROOTFS_ND, },
-};
-
-ulong totsize;
-
-/* where to load files into memory */
-#define LOAD_ADDR ((unsigned char *)0x00200000)
-
-/* the root file system is the largest image */
-#define MAX_LOADSZ ausize[IDX_ROOTFS]
-
-/*i2c address of the keypad status*/
-#define I2C_PSOC_KEYPAD_ADDR 0x53
-
-/* keypad mask */
-#define KEYPAD_ROW 2
-#define KEYPAD_COL 2
-#define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))&0xFF)
-#define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))>>8)
-
-/* externals */
-extern int fat_register_device(block_dev_desc_t *, int);
-extern int file_fat_detectfs(void);
-extern long file_fat_read(const char *, void *, unsigned long);
-extern int i2c_read (unsigned char, unsigned int, int , unsigned char* , int);
-extern int flash_sect_erase(ulong, ulong);
-extern int flash_sect_protect (int, ulong, ulong);
-extern int flash_write (char *, ulong, ulong);
-extern int u_boot_hush_start(void);
-#ifdef CONFIG_PROGRESSBAR
-extern void show_progress(int, int);
-extern void lcd_puts (char *);
-extern void lcd_enable(void);
-#endif
-
-int au_check_cksum_valid(int idx, long nbytes)
-{
- image_header_t *hdr;
-
- hdr = (image_header_t *)LOAD_ADDR;
-#if defined(CONFIG_FIT)
- if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
- puts ("Non legacy image format not supported\n");
- return -1;
- }
-#endif
-
- if (nbytes != image_get_image_size (hdr)) {
- printf ("Image %s bad total SIZE\n", aufile[idx]);
- return -1;
- }
- /* check the data CRC */
- if (!image_check_dcrc (hdr)) {
- printf ("Image %s bad data checksum\n", aufile[idx]);
- return -1;
- }
- return 0;
-}
-
-int au_check_header_valid(int idx, long nbytes)
-{
- image_header_t *hdr;
- unsigned long checksum, fsize;
-
- hdr = (image_header_t *)LOAD_ADDR;
-#if defined(CONFIG_FIT)
- if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
- puts ("Non legacy image format not supported\n");
- return -1;
- }
-#endif
-
- /* check the easy ones first */
-#undef CHECK_VALID_DEBUG
-#ifdef CHECK_VALID_DEBUG
- printf("magic %#x %#x ", image_get_magic (hdr), IH_MAGIC);
- printf("arch %#x %#x ", image_get_arch (hdr), IH_ARCH_ARM);
- printf("size %#x %#lx ", image_get_data_size (hdr), nbytes);
- printf("type %#x %#x ", image_get_type (hdr), IH_TYPE_KERNEL);
-#endif
- if (nbytes < image_get_header_size ()) {
- printf ("Image %s bad header SIZE\n", aufile[idx]);
- ausize[idx] = 0;
- return -1;
- }
- if (!image_check_magic (hdr) || !image_check_arch (hdr, IH_ARCH_PPC)) {
- printf ("Image %s bad MAGIC or ARCH\n", aufile[idx]);
- ausize[idx] = 0;
- return -1;
- }
- /* check the hdr CRC */
- if (!image_check_hcrc (hdr)) {
- printf ("Image %s bad header checksum\n", aufile[idx]);
- ausize[idx] = 0;
- return -1;
- }
- /* check the type - could do this all in one gigantic if() */
- if ((idx == IDX_FIRMWARE) && !image_check_type (hdr, IH_TYPE_FIRMWARE)) {
- printf ("Image %s wrong type\n", aufile[idx]);
- ausize[idx] = 0;
- return -1;
- }
- if ((idx == IDX_KERNEL) && !image_check_type (hdr, IH_TYPE_KERNEL)) {
- printf ("Image %s wrong type\n", aufile[idx]);
- ausize[idx] = 0;
- return -1;
- }
- if ((idx == IDX_ROOTFS) &&
- (!image_check_type (hdr, IH_TYPE_RAMDISK) &&
- !image_check_type (hdr, IH_TYPE_FILESYSTEM))) {
- printf ("Image %s wrong type\n", aufile[idx]);
- ausize[idx] = 0;
- return -1;
- }
- /* recycle checksum */
- checksum = image_get_data_size (hdr);
-
- fsize = checksum + image_get_header_size ();
- /* for kernel and ramdisk the image header must also fit into flash */
- if (idx == IDX_KERNEL || image_check_type (hdr, IH_TYPE_RAMDISK))
- checksum += image_get_header_size ();
-
- /* check the size does not exceed space in flash. HUSH scripts */
- if ((ausize[idx] != 0) && (ausize[idx] < checksum)) {
- printf ("Image %s is bigger than FLASH\n", aufile[idx]);
- ausize[idx] = 0;
- return -1;
- }
- /* Update with the real filesize */
- ausize[idx] = fsize;
-
- return checksum; /* return size to be written to flash */
-}
-
-int au_do_update(int idx, long sz)
-{
- image_header_t *hdr;
- char *addr;
- long start, end;
- int off, rc;
- uint nbytes;
-
- hdr = (image_header_t *)LOAD_ADDR;
-#if defined(CONFIG_FIT)
- if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
- puts ("Non legacy image format not supported\n");
- return -1;
- }
-#endif
-
- /* execute a script */
- if (image_check_type (hdr, IH_TYPE_SCRIPT)) {
- addr = (char *)((char *)hdr + image_get_header_size ());
- /* stick a NULL at the end of the script, otherwise */
- /* parse_string_outer() runs off the end. */
- addr[image_get_data_size (hdr)] = 0;
- addr += 8;
- run_command_list(addr, -1, 0);
- return 0;
- }
-
- start = aufl_layout[idx].start;
- end = aufl_layout[idx].end;
-
- /* unprotect the address range */
- /* this assumes that ONLY the firmware is protected! */
- if (idx == IDX_FIRMWARE) {
-#undef AU_UPDATE_TEST
-#ifdef AU_UPDATE_TEST
- /* erase it where Linux goes */
- start = aufl_layout[1].start;
- end = aufl_layout[1].end;
-#endif
- flash_sect_protect(0, start, end);
- }
-
- /*
- * erase the address range.
- */
- debug ("flash_sect_erase(%lx, %lx);\n", start, end);
- flash_sect_erase(start, end);
- mdelay(100);
-#ifdef CONFIG_PROGRESSBAR
- show_progress(end - start, totsize);
-#endif
-
- /* strip the header - except for the kernel and ramdisk */
- if (image_check_type (hdr, IH_TYPE_KERNEL) ||
- image_check_type (hdr, IH_TYPE_RAMDISK)) {
- addr = (char *)hdr;
- off = image_get_header_size ();
- nbytes = image_get_image_size (hdr);
- } else {
- addr = (char *)((char *)hdr + image_get_header_size ());
-#ifdef AU_UPDATE_TEST
- /* copy it to where Linux goes */
- if (idx == IDX_FIRMWARE)
- start = aufl_layout[1].start;
-#endif
- off = 0;
- nbytes = image_get_data_size (hdr);
- }
-
- /* copy the data from RAM to FLASH */
- debug ("flash_write(%p, %lx %x)\n", addr, start, nbytes);
- rc = flash_write(addr, start, nbytes);
- if (rc != 0) {
- printf("Flashing failed due to error %d\n", rc);
- return -1;
- }
-
-#ifdef CONFIG_PROGRESSBAR
- show_progress(nbytes, totsize);
-#endif
-
- /* check the data CRC of the copy */
- if (crc32 (0, (uchar *)(start + off), image_get_data_size (hdr)) !=
- image_get_dcrc (hdr)) {
- printf ("Image %s Bad Data Checksum after COPY\n", aufile[idx]);
- return -1;
- }
-
- /* protect the address range */
- /* this assumes that ONLY the firmware is protected! */
- if (idx == IDX_FIRMWARE)
- flash_sect_protect(1, start, end);
- return 0;
-}
-
-/*
- * this is called from board_init() after the hardware has been set up
- * and is usable. That seems like a good time to do this.
- * Right now the return value is ignored.
- */
-int do_auto_update(void)
-{
- block_dev_desc_t *stor_dev;
- long sz;
- int i, res = 0, cnt, old_ctrlc;
- char *env;
- long start, end;
-
-#if 0 /* disable key-press detection to speed up boot-up time */
- uchar keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0};
-
- /*
- * Read keypad status
- */
- i2c_read(I2C_PSOC_KEYPAD_ADDR, 0, 0, keypad_status1, 2);
- mdelay(500);
- i2c_read(I2C_PSOC_KEYPAD_ADDR, 0, 0, keypad_status2, 2);
-
- /*
- * Check keypad
- */
- if ( !(keypad_status1[1] & KEYPAD_MASK_LO) ||
- (keypad_status1[1] != keypad_status2[1])) {
- return 0;
- }
-
-#endif
- au_usb_stor_curr_dev = -1;
- /* start USB */
- if (usb_stop() < 0) {
- debug ("usb_stop failed\n");
- return -1;
- }
- if (usb_init() < 0) {
- debug ("usb_init failed\n");
- return -1;
- }
- /*
- * check whether a storage device is attached (assume that it's
- * a USB memory stick, since nothing else should be attached).
- */
- au_usb_stor_curr_dev = usb_stor_scan(0);
- if (au_usb_stor_curr_dev == -1) {
- debug ("No device found. Not initialized?\n");
- res = -1;
- goto xit;
- }
- /* check whether it has a partition table */
- stor_dev = get_dev("usb", 0);
- if (stor_dev == NULL) {
- debug ("uknown device type\n");
- res = -1;
- goto xit;
- }
- if (fat_register_device(stor_dev, 1) != 0) {
- debug ("Unable to use USB %d:%d for fatls\n",
- au_usb_stor_curr_dev, 1);
- res = -1;
- goto xit;
- }
- if (file_fat_detectfs() != 0) {
- debug ("file_fat_detectfs failed\n");
- }
-
- /*
- * now check whether start and end are defined using environment
- * variables.
- */
- start = -1;
- end = 0;
- env = getenv("firmware_st");
- if (env != NULL)
- start = simple_strtoul(env, NULL, 16);
- env = getenv("firmware_nd");
- if (env != NULL)
- end = simple_strtoul(env, NULL, 16);
- if (start >= 0 && end && end > start) {
- ausize[IDX_FIRMWARE] = (end + 1) - start;
- aufl_layout[IDX_FIRMWARE].start = start;
- aufl_layout[IDX_FIRMWARE].end = end;
- }
- start = -1;
- end = 0;
- env = getenv("kernel_st");
- if (env != NULL)
- start = simple_strtoul(env, NULL, 16);
- env = getenv("kernel_nd");
- if (env != NULL)
- end = simple_strtoul(env, NULL, 16);
- if (start >= 0 && end && end > start) {
- ausize[IDX_KERNEL] = (end + 1) - start;
- aufl_layout[IDX_KERNEL].start = start;
- aufl_layout[IDX_KERNEL].end = end;
- }
- start = -1;
- end = 0;
- env = getenv("rootfs_st");
- if (env != NULL)
- start = simple_strtoul(env, NULL, 16);
- env = getenv("rootfs_nd");
- if (env != NULL)
- end = simple_strtoul(env, NULL, 16);
- if (start >= 0 && end && end > start) {
- ausize[IDX_ROOTFS] = (end + 1) - start;
- aufl_layout[IDX_ROOTFS].start = start;
- aufl_layout[IDX_ROOTFS].end = end;
- }
-
- /* make certain that HUSH is runnable */
- u_boot_hush_start();
- /* make sure that we see CTRL-C and save the old state */
- old_ctrlc = disable_ctrlc(0);
-
- /* validate the images first */
- for (i = 0; i < AU_MAXFILES; i++) {
- ulong imsize;
- /* just read the header */
- sz = file_fat_read(aufile[i], LOAD_ADDR, image_get_header_size ());
- debug ("read %s sz %ld hdr %d\n",
- aufile[i], sz, image_get_header_size ());
- if (sz <= 0 || sz < image_get_header_size ()) {
- debug ("%s not found\n", aufile[i]);
- ausize[i] = 0;
- continue;
- }
- /* au_check_header_valid() updates ausize[] */
- if ((imsize = au_check_header_valid(i, sz)) < 0) {
- debug ("%s header not valid\n", aufile[i]);
- continue;
- }
- /* totsize accounts for image size and flash erase size */
- totsize += (imsize + (aufl_layout[i].end - aufl_layout[i].start));
- }
-
-#ifdef CONFIG_PROGRESSBAR
- if (totsize) {
- lcd_puts(" Update in progress\n");
- lcd_enable();
- }
-#endif
-
- /* just loop thru all the possible files */
- for (i = 0; i < AU_MAXFILES && totsize; i++) {
- if (!ausize[i]) {
- continue;
- }
- sz = file_fat_read(aufile[i], LOAD_ADDR, ausize[i]);
-
- debug ("read %s sz %ld hdr %d\n",
- aufile[i], sz, image_get_header_size ());
-
- if (sz != ausize[i]) {
- printf ("%s: size %ld read %ld?\n", aufile[i], ausize[i], sz);
- continue;
- }
-
- if (sz <= 0 || sz <= image_get_header_size ()) {
- debug ("%s not found\n", aufile[i]);
- continue;
- }
- if (au_check_cksum_valid(i, sz) < 0) {
- debug ("%s checksum not valid\n", aufile[i]);
- continue;
- }
- /* this is really not a good idea, but it's what the */
- /* customer wants. */
- cnt = 0;
- do {
- res = au_do_update(i, sz);
- /* let the user break out of the loop */
- if (ctrlc() || had_ctrlc()) {
- clear_ctrlc();
- break;
- }
- cnt++;
-#ifdef AU_TEST_ONLY
- } while (res < 0 && cnt < (AU_MAXFILES + 1));
- if (cnt < (AU_MAXFILES + 1))
-#else
- } while (res < 0);
-#endif
- }
-
- /* restore the old state */
- disable_ctrlc(old_ctrlc);
-#ifdef CONFIG_PROGRESSBAR
- if (totsize) {
- if (!res) {
- lcd_puts("\n Update completed\n");
- } else {
- lcd_puts("\n Update error\n");
- }
- lcd_enable();
- }
-#endif
- xit:
- usb_stop();
- return res;
-}
-#endif /* CONFIG_AUTO_UPDATE */
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <lcd.h>
-#include <mpc5xxx.h>
-#include <malloc.h>
-
-#ifdef CONFIG_LCD
-
-#undef SWAPPED_LCD /* For the previous h/w version */
-/*
- * The name of the device used for communication
- * with the PSoC.
- */
-#define PSOC_PSC MPC5XXX_PSC2
-#define PSOC_BAUD 230400UL
-
-#define RTS_ASSERT 1
-#define RTS_NEGATE 0
-#define CTS_ASSERT 1
-#define CTS_NEGATE 0
-
-/*
- * Dimensions in pixels
- */
-#define LCD_WIDTH 160
-#define LCD_HEIGHT 100
-
-/*
- * Dimensions in bytes
- */
-#define LCD_BUF_SIZE ((LCD_WIDTH*LCD_HEIGHT)>>3)
-
-#if LCD_BPP != LCD_MONOCHROME
-#error "MCC200 support only monochrome displays (1 bpp)!"
-#endif
-
-#define PSOC_RETRIES 10 /* each of PSOC_WAIT_TIME */
-#define PSOC_WAIT_TIME 10 /* usec */
-
-#include <video_font.h>
-#define FONT_WIDTH VIDEO_FONT_WIDTH
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * LCD information
- */
-vidinfo_t panel_info = {
- LCD_WIDTH, LCD_HEIGHT, LCD_BPP
-};
-
-
-/*
- * The device we use to communicate with PSoC
- */
-int serial_inited = 0;
-
-/*
- * Imported functions to support the PSoC protocol
- */
-extern int serial_init_dev (unsigned long dev_base);
-extern void serial_setrts_dev (unsigned long dev_base, int s);
-extern int serial_getcts_dev (unsigned long dev_base);
-extern void serial_putc_raw_dev(unsigned long dev_base, const char c);
-
-/*
- * Just stubs for our driver, needed for compiling compabilty with
- * the common LCD driver code.
- */
-void lcd_initcolregs (void)
-{
-}
-
-void lcd_ctrl_init (void *lcdbase)
-{
-}
-
-/*
- * Function sends the contents of the frame-buffer to the LCD
- */
-void lcd_enable (void)
-{
- int i, retries, fb_size;
-
- if (!serial_inited) {
- unsigned long baud;
-
- baud = gd->baudrate;
- gd->baudrate = PSOC_BAUD;
- serial_init_dev(PSOC_PSC);
- gd->baudrate = baud;
- serial_setrts_dev (PSOC_PSC, RTS_ASSERT);
- serial_inited = 1;
- }
-
- /*
- * Implement PSoC communication protocol:
- * 1. Assert RTS, wait CTS assertion
- * 2. Transmit data
- * 3. Negate RTS, wait CTS negation
- */
-
- /* 1 */
- serial_setrts_dev (PSOC_PSC, RTS_ASSERT);
- for (retries = PSOC_RETRIES; retries; retries--) {
- if (serial_getcts_dev(PSOC_PSC) == CTS_ASSERT)
- break;
- udelay (PSOC_WAIT_TIME);
- }
- if (!retries) {
- printf ("%s Error: PSoC doesn't respond on "
- "RTS ASSERT\n", __FUNCTION__);
- }
-
- /* 2 */
- fb_size = panel_info.vl_row * (panel_info.vl_col >> 3);
-
-#if !defined(SWAPPED_LCD)
- for (i=0; i<fb_size; i++) {
- serial_putc_raw_dev(PSOC_PSC, ((char *)gd->fb_base)[i]);
- }
-#else
- {
- int x, y, pwidth;
- char *p = (char *)gd->fb_base;
-
- pwidth = ((panel_info.vl_col+7) >> 3);
- for (y=0; y<panel_info.vl_row; y++) {
- i = y * pwidth;
- for (x=0; x<pwidth; x+=5) {
- serial_putc_raw_dev (PSOC_PSC, (p[i+x+2]<<4 & 0xF0) | (p[i+x+3]>>4 & 0x0F));
- serial_putc_raw_dev (PSOC_PSC, (p[i+x+3]<<4 & 0xF0) | (p[i+x+4]>>4 & 0x0F));
- serial_putc_raw_dev (PSOC_PSC, (p[i+x+4]<<4 & 0xF0) | (p[i+x]>>4 & 0x0F));
- serial_putc_raw_dev (PSOC_PSC, (p[i+x]<<4 & 0xF0) | (p[i+x+1]>>4 & 0x0F));
- serial_putc_raw_dev (PSOC_PSC, (p[i+x+1]<<4 & 0xF0) | (p[i+x+2]>>4 & 0x0F));
- }
- }
- }
-#endif
-
- /* 3 */
- serial_setrts_dev (PSOC_PSC, RTS_NEGATE);
- for (retries = PSOC_RETRIES; retries; retries--) {
- if (serial_getcts_dev(PSOC_PSC) == CTS_NEGATE)
- break;
- udelay (PSOC_WAIT_TIME);
- }
-
- return;
-}
-#ifdef CONFIG_PROGRESSBAR
-
-void show_progress (int size, int tot)
-{
- int cnt;
- int i;
- static int rc = 0;
-
- rc += size;
-
- cnt = ((LCD_WIDTH/FONT_WIDTH) * rc) / tot;
-
- rc -= (cnt * tot) / (LCD_WIDTH/FONT_WIDTH);
-
- for (i = 0; i < cnt; i++) {
- lcd_putc(0xdc);
- }
-
- if (cnt) {
- lcd_enable(); /* MCC200-specific - send the framebuffer to PSoC */
- }
-}
-
-#endif
-
-int bmp_display(ulong addr, int x, int y)
-{
- int ret;
- bmp_image_t *bmp = (bmp_image_t *)addr;
-
- if (!bmp) {
- printf("There is no valid bmp file at the given address\n");
- return 1;
- }
-
- ret = lcd_display_bitmap((ulong)bmp, x, y);
-
- if ((unsigned long)bmp != addr)
- free(bmp);
-
- return ret;
-}
-
-#endif /* CONFIG_LCD */
+++ /dev/null
-/*
- * (C) Copyright 2003-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <asm/processor.h>
-
-/* Two MT48LC8M32B2 for 32 MB */
-/* #include "mt48lc8m32b2-6-7.h" */
-
-/* One MT48LC16M32S2 for 64 MB */
-/* #include "mt48lc16m32s2-75.h" */
-#if defined (CONFIG_MCC200_SDRAM)
-#include "mt48lc16m16a2-75.h"
-#else
-#include "mt46v16m16-75.h"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[]; /* FLASH chips info */
-
-extern int do_auto_update(void);
-ulong flash_get_size (ulong base, int banknum);
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
- __asm__ volatile ("sync");
-
-#if SDRAM_DDR
- /* set mode register: extended mode */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
- __asm__ volatile ("sync");
-
- /* set mode register: reset DLL */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
- __asm__ volatile ("sync");
-#endif
-
- /* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* auto refresh */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* set mode register */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
- __asm__ volatile ("sync");
-
- /* normal operation */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
- __asm__ volatile ("sync");
-
- udelay(10);
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- * is something else than 0x00000000.
- */
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
- ulong dramsize2 = 0;
- uint svr, pvr;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
- __asm__ volatile ("sync");
-
-#if SDRAM_DDR
- /* set tap delay */
- *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
- __asm__ volatile ("sync");
-#endif
-
- /* find RAM size using SDRAM CS0 only */
- sdram_start(0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20)) {
- dramsize = 0;
- }
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
- } else {
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
- }
-
- /* let SDRAM CS1 start right after CS0 */
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
-
- /* find RAM size using SDRAM CS1 only */
- if (!dramsize)
- sdram_start(0);
- test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
- if (!dramsize) {
- sdram_start(1);
- test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
- }
- if (test1 > test2) {
- sdram_start(0);
- dramsize2 = test1;
- } else {
- dramsize2 = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize2 < (1 << 20)) {
- dramsize2 = 0;
- }
-
- /* set SDRAM CS1 size according to the amount of RAM found */
- if (dramsize2 > 0) {
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
- | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
- } else {
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
- }
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
- if (dramsize >= 0x13) {
- dramsize = (1 << (dramsize - 0x13)) << 20;
- } else {
- dramsize = 0;
- }
-
- /* retrieve size of memory connected to SDRAM CS1 */
- dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
- if (dramsize2 >= 0x13) {
- dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
- } else {
- dramsize2 = 0;
- }
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- /*
- * On MPC5200B we need to set the special configuration delay in the
- * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
- * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
- *
- * "The SDelay should be written to a value of 0x00000004. It is
- * required to account for changes caused by normal wafer processing
- * parameters."
- */
- svr = get_svr();
- pvr = get_pvr();
- if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
- *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
- __asm__ volatile ("sync");
- }
-
- return dramsize + dramsize2;
-}
-
-int checkboard (void)
-{
-#if defined(CONFIG_PRS200)
- puts ("Board: PRS200\n");
-#else
- puts ("Board: MCC200\n");
-#endif
- return 0;
-}
-
-int misc_init_r (void)
-{
- ulong flash_sup_end, snum;
-
- /*
- * Adjust flash start and offset to detected values
- */
- gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
- gd->bd->bi_flashoffset = 0;
-
- /*
- * Check if boot FLASH isn't max size
- */
- if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH_BASE)) {
- /* adjust mapping */
- *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
- START_REG(gd->bd->bi_flashstart);
- *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
- STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize);
-
- /*
- * Re-check to get correct base address
- */
- flash_get_size(gd->bd->bi_flashstart, CONFIG_SYS_MAX_FLASH_BANKS - 1);
-
- /*
- * Re-do flash protection upon new addresses
- */
- flash_protect (FLAG_PROTECT_CLEAR,
- gd->bd->bi_flashstart, 0xffffffff,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
- /* Monitor protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
- /* Environment protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
- /* Redundant environment protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
- }
-
- if (gd->bd->bi_flashsize > (32 << 20)) {
- /* Unprotect the upper bank of the Flash */
- *(volatile int*)MPC5XXX_CS0_CFG |= (1 << 6);
- flash_protect (FLAG_PROTECT_CLEAR,
- flash_info[0].start[0] + flash_info[0].size / 2,
- (flash_info[0].start[0] - 1) + flash_info[0].size,
- &flash_info[0]);
- *(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6);
- printf ("Warning: Only 32 of 64 MB of Flash are accessible from U-Boot\n");
- flash_info[0].size = 32 << 20;
- for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20);
- flash_info[0].start[snum] < flash_sup_end;
- snum++);
- flash_info[0].sector_count = snum;
- }
-
-#ifdef CONFIG_AUTO_UPDATE
- do_auto_update();
-#endif
- return (0);
-}
-
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
- pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
- debug ("init_ide_reset\n");
-
-}
-
-void ide_set_reset (int idereset)
-{
- debug ("ide_reset(%d)\n", idereset);
-
-}
-#endif
-
-#if defined(CONFIG_CMD_DOC)
-void doc_init (void)
-{
- doc_probe (CONFIG_SYS_DOC_BASE);
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_DDR 1 /* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE 0x018D0000
-#define SDRAM_EMODE 0x40090000
-#define SDRAM_CONTROL 0x714f0f00
-#define SDRAM_CONFIG1 0x73722930
-#define SDRAM_CONFIG2 0x47770000
-#define SDRAM_TAPDELAY 0x10000000
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_DDR 0 /* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE 0x00CD0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xD2322800
-#define SDRAM_CONFIG2 0x8AD70000
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_DDR 0 /* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE 0x00CD0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xD2322800
-#define SDRAM_CONFIG2 0x8AD70000
+++ /dev/null
-/*
- * Configuration Registers for the MT48LC8M32B2 SDRAM on the MPC5200 platform
- */
-
-#define SDRAM_DDR 0 /* is SDR */
-
-/* Settings for XLB = 132 MHz */
-
-#define SDRAM_MODE 0x008d0000 /* CL-3 BURST-8 -> Mode Register MBAR + 0x0100 */
-#define SDRAM_CONTROL 0x504f0000 /* Control Register MBAR + 0x0104 */
-#define SDRAM_CONFIG1 0xc2222900 /* Delays between commands -> Configuration Register 1 MBAR + 0x0108 */
-#define SDRAM_CONFIG2 0x88c70000 /* Delays between commands -> Configuration Register 2 MBAR + 0x010C */
FLASH_BUS *addr = (FLASH_BUS *) 0;
+ /* cppcheck-suppress nullPointer */
*addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
+ /* cppcheck-suppress nullPointer */
return *addr;
}
#endif /* #ifdef CONFIG_FACTORYSET */
/* Set rgmii mode and enable rmii clock to be sourced from chip */
- writel(RGMII_MODE_ENABLE , &cdev->miisel);
+ writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
rv = cpsw_register(&cpsw_data);
if (rv < 0)
config MACH_SUN6I
bool "sun6i (Allwinner A31)"
select CPU_V7
+ select SUPPORT_SPL
config MACH_SUN7I
bool "sun7i (Allwinner A20)"
bool "MELE_M3"
depends on MACH_SUN7I
+config TARGET_MELE_M9
+ bool "MELE_M9"
+ depends on MACH_SUN6I
+
config TARGET_MINI_X_1GB
bool "MINI_X_1GB"
depends on MACH_SUN4I
slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
support for this.
+config USB1_VBUS_PIN
+ string "Vbus enable pin for usb1 (ehci0)"
+ default "PH6" if MACH_SUN4I || MACH_SUN7I
+ default "PH27" if MACH_SUN6I
+ ---help---
+ Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
+ a string in the format understood by sunxi_name_to_gpio, e.g.
+ PH1 for pin 1 of port H.
+
+config USB2_VBUS_PIN
+ string "Vbus enable pin for usb2 (ehci1)"
+ default "PH3" if MACH_SUN4I || MACH_SUN7I
+ default "PH24" if MACH_SUN6I
+ ---help---
+ See USB1_VBUS_PIN help text.
+
endif
F: configs/Mele_A1000_defconfig
F: configs/Mele_A1000G_defconfig
F: configs/Mele_M3_defconfig
+F: configs/Mele_M9_defconfig
F: configs/Mini-X_defconfig
F: configs/Mini-X-1Gb_defconfig
F: include/configs/sun5i.h
#ifdef CONFIG_AXP209_POWER
#include <axp209.h>
#endif
+#ifdef CONFIG_AXP221_POWER
+#include <axp221.h>
+#endif
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dram.h>
power_failed |= axp209_set_ldo2(3000);
power_failed |= axp209_set_ldo3(2800);
power_failed |= axp209_set_ldo4(2800);
+#endif
+#ifdef CONFIG_AXP221_POWER
+ power_failed = axp221_init();
+ power_failed |= axp221_set_dcdc1(3000);
+ power_failed |= axp221_set_dcdc2(1200);
+ power_failed |= axp221_set_dcdc3(1200);
+ power_failed |= axp221_set_dcdc4(1200);
+ power_failed |= axp221_set_dcdc5(1500);
+#if CONFIG_AXP221_DLDO1_VOLT != -1
+ power_failed |= axp221_set_dldo1(CONFIG_AXP221_DLDO1_VOLT);
+#endif
+#if CONFIG_AXP221_DLDO4_VOLT != -1
+ power_failed |= axp221_set_dldo4(CONFIG_AXP221_DLDO4_VOLT);
+#endif
+#if CONFIG_AXP221_ALDO1_VOLT != -1
+ power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT);
+#endif
+#if CONFIG_AXP221_ALDO2_VOLT != -1
+ power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT);
+#endif
+#if CONFIG_AXP221_ALDO3_VOLT != -1
+ power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT);
+#endif
#endif
printf("DRAM:");
* need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain"
* of the GMAC clk register to 3.
*/
-#ifdef CONFIG_BANANAPI
+#ifdef CONFIG_TARGET_BANANAPI
setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10);
#endif
--- /dev/null
+if TARGET_TBS2910
+
+config SYS_CPU
+ string
+ default "armv7"
+
+config SYS_BOARD
+ string
+ default "tbs2910"
+
+config SYS_VENDOR
+ string
+ default "tbs"
+
+config SYS_SOC
+ string
+ default "mx6"
+
+config SYS_CONFIG_NAME
+ string
+ default "tbs2910"
+
+endif
--- /dev/null
+TBS2910 BOARD
+M: Soeren Moch <smoch@web.de>
+S: Maintained
+F: board/tbs/tbs2910/
+F: configs/tbs2910_defconfig
+F: include/configs/tbs2910.h
--- /dev/null
+#
+# Copyright (C) 2014 Soeren Moch <smoch@web.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := tbs2910.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Soeren Moch <smoch@web.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/errno.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/sata.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <i2c.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+#define WEAK_PULLUP (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_SRE_SLOW)
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
+
+#ifdef CONFIG_SYS_I2C
+/* I2C1, SGTL5000 */
+static struct i2c_pads_info i2c_pad_info0 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | I2C_PAD,
+ .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | I2C_PAD,
+ .gp = IMX_GPIO_NR(5, 27)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | I2C_PAD,
+ .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | I2C_PAD,
+ .gp = IMX_GPIO_NR(5, 26)
+ }
+};
+
+/* I2C2 HDMI */
+static struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
+ .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
+ .gp = IMX_GPIO_NR(4, 12)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
+ .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
+ .gp = IMX_GPIO_NR(4, 13)
+ }
+};
+
+/* I2C3, CON11, DS1307, PCIe_SMB */
+static struct i2c_pads_info i2c_pad_info2 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | I2C_PAD,
+ .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | I2C_PAD,
+ .gp = IMX_GPIO_NR(1, 3)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | I2C_PAD,
+ .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | I2C_PAD,
+ .gp = IMX_GPIO_NR(1, 6)
+ }
+};
+#endif /* CONFIG_SYS_I2C */
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const uart2_pads[] = {
+ MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const enet_pads[] = {
+ MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ /* AR8035 PHY Reset */
+ MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const pcie_pads[] = {
+ /* W_DISABLE# */
+ MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
+ /* PERST# */
+ MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+int dram_init(void)
+{
+ gd->ram_size = 2048ul * 1024 * 1024;
+ return 0;
+}
+
+static void setup_iomux_enet(void)
+{
+ imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
+
+ /* Reset AR8035 PHY */
+ gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
+ udelay(500);
+ gpio_set_value(IMX_GPIO_NR(1, 25), 1);
+}
+
+static void setup_pcie(void)
+{
+ imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
+}
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+ imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+ MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+static iomux_v3_cfg_t const usdhc4_pads[] = {
+ MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+static struct fsl_esdhc_cfg usdhc_cfg[3] = {
+ {USDHC2_BASE_ADDR},
+ {USDHC3_BASE_ADDR},
+ {USDHC4_BASE_ADDR},
+};
+
+#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 2)
+#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 0)
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC2_BASE_ADDR:
+ ret = !gpio_get_value(USDHC2_CD_GPIO);
+ break;
+ case USDHC3_BASE_ADDR:
+ ret = !gpio_get_value(USDHC3_CD_GPIO);
+ break;
+ case USDHC4_BASE_ADDR:
+ ret = 1; /* eMMC/uSDHC4 is always present */
+ break;
+ }
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ s32 status = 0;
+ int i;
+
+ /*
+ * (U-boot device node) (Physical Port)
+ * mmc0 SD2
+ * mmc1 SD3
+ * mmc2 eMMC
+ */
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ switch (i) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ gpio_direction_input(USDHC2_CD_GPIO);
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ gpio_direction_input(USDHC3_CD_GPIO);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ break;
+ case 2:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers"
+ "(%d) then supported by the board (%d)\n",
+ i + 1, CONFIG_SYS_FSL_USDHC_NUM);
+ return status;
+ }
+
+ status |= fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ }
+ return status;
+}
+#endif /* CONFIG_FSL_ESDHC */
+
+#ifdef CONFIG_VIDEO_IPUV3
+static void do_enable_hdmi(struct display_info_t const *dev)
+{
+ imx_enable_hdmi_phy();
+}
+
+struct display_info_t const displays[] = {{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_hdmi,
+ .enable = do_enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ /* 1024x768@60Hz (VESA)*/
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15384,
+ .left_margin = 160,
+ .right_margin = 24,
+ .upper_margin = 29,
+ .lower_margin = 3,
+ .hsync_len = 136,
+ .vsync_len = 6,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+size_t display_count = ARRAY_SIZE(displays);
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ int reg;
+ s32 timeout = 100000;
+
+ enable_ipu_clock();
+ imx_setup_hdmi();
+
+ /* set video pll to 455MHz (24MHz * (37+11/12) / 2) */
+ reg = readl(&ccm->analog_pll_video);
+ reg |= BM_ANADIG_PLL_VIDEO_POWERDOWN;
+ writel(reg, &ccm->analog_pll_video);
+
+ reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
+ reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(37);
+ reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
+ reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1);
+ writel(reg, &ccm->analog_pll_video);
+
+ writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
+ writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);
+
+ reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
+ writel(reg, &ccm->analog_pll_video);
+
+ while (timeout--)
+ if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
+ break;
+ if (timeout < 0)
+ printf("Warning: video pll lock timeout!\n");
+
+ reg = readl(&ccm->analog_pll_video);
+ reg |= BM_ANADIG_PLL_VIDEO_ENABLE;
+ reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
+ writel(reg, &ccm->analog_pll_video);
+
+ /* select video pll for ldb_di0_clk */
+ reg = readl(&ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK);
+ writel(reg, &ccm->cs2cdr);
+
+ /* select ldb_di0_clk / 7 for ldb_di0_ipu_clk */
+ reg = readl(&ccm->cscmr2);
+ reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
+ writel(reg, &ccm->cscmr2);
+
+ /* select ldb_di0_ipu_clk for ipu1_di0_clk -> 65MHz pixclock */
+ reg = readl(&ccm->chsccdr);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+ writel(reg, &ccm->chsccdr);
+}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
+int board_eth_init(bd_t *bis)
+{
+ setup_iomux_enet();
+ setup_pcie();
+ return cpu_eth_init(bis);
+}
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+ return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+ {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+ /* 8 bit bus width */
+ {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_VIDEO_IPUV3
+ setup_display();
+#endif
+#ifdef CONFIG_SYS_I2C
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+ setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+#endif
+#ifdef CONFIG_DWC_AHSATA
+ setup_sata();
+#endif
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: TBS2910 Matrix ARM mini PC\n");
+ return 0;
+}
board you may want something other than UART0 as for example the IDK
uses UART3 so enter 4 here.
+config NOR
+ bool "Support for NOR flash"
+ help
+ The AM335x SoC supports having a NOR flash connected to the GPMC.
+ In practice this is seen as a NOR flash module connected to the
+ "memory cape" for the BeagleBone family.
+
+config NOR_BOOT
+ bool "Support for booting from NOR flash"
+ depends on NOR
+ help
+ Enabling this will make a U-Boot binary that is capable of being
+ booted via NOR. In this case we will enable certain pinmux early
+ as the ROM only partially sets up pinmux. We also default to using
+ NOR for environment.
endif
if TARGET_K2L_EVM
config SYS_BOARD
- string
default "ks2_evm"
config SYS_VENDOR
- string
default "ti"
config SYS_CONFIG_NAME
- string
default "k2l_evm"
endif
Author: Murali Karicheri <m-karicheri2@ti.com>
-This README has information on the u-boot port for K2HK, K2E boards.
+This README has information on the u-boot port for K2HK, K2E, and K2L EVM boards.
Documentation for this board can be found at
http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
+https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
The K2HK board is based on Texas Instruments Keystone2 family of SoCs: K2H, K2K.
More details on these SoCs are available at company websites
K2H: http://www.ti.com/product/tci6638k2h
The K2E SoC details are available at
- K2E http://www.ti.com/lit/ds/symlink/66ak2e05.pdf
+ http://www.ti.com/lit/ds/symlink/66ak2e05.pdf
+
+The K2L SoC details are available at
+ http://www.ti.com/lit/ds/symlink/tci6630k2l.pdf
Board configuration:
====================
+------+-------+-------+-----------+-----------+-------+-------+----+
|K2HK |2 |512MB |6MB |4(2) |2 |3 |3 |
|K2E |4 |512MB |2MB |8(2) |2 |3 |3 |
+|K2L |2 |512MB |2MB |4(2) |4 |3 |3 |
+------+-------+-------+-----------+-----------+-------+-------+----+
There are only 2 eth port installed on the boards.
Board configuration files:
include/configs/k2hk_evm.h
include/configs/k2e_evm.h
+include/configs/k2l_evm.h
+include/configs/k2l_evm.h
As u-boot is migrating to Kconfig there is also board defconfig files
configs/k2e_evm_defconfig
configs/k2hk_evm_defconfig
+configs/k2l_evm_defconfig
Supported boot modes:
- SPI NOR boot
Build instructions:
===================
-Examples for k2hk, for k2e just replace k2hk prefix accordingly.
+Examples for k2hk, for k2e and k2l just replace k2hk prefix accordingly.
Don't forget to add ARCH=arm and CROSS_COMPILE.
To build u-boot.bin
on EVM. Follow instructions at
K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup
K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup
+K2L http://processors.wiki.ti.com/index.php/TCIEVMK2L_Hardware_Setup
+
to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode"
and Power ON the EVM. Follow instructions to connect serial port of EVM to
PC and start TeraTerm or Hyper Terminal.
2. Suspend Target. Select Run -> Suspend from top level menu
CortexA15_1 (Free Running)"
3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000
- through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E EVM
- using CCS", but using address 0x87000000.
+ through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E/K2L
+ EVM using CCS", but using address 0x87000000.
4. Free Run the target as described earlier (step 4) to get u-boot prompt
5. At the U-Boot console type following to setup u-boot environment variables.
setenv addr_uboot 0x87000000
int nbanks;
u64 size[2];
u64 start[2];
- char name[32];
int nodeoffset;
u32 ddr3a_size;
int unitrd_fixup = 0;
}
/* reserve memory at start of bank */
- sprintf(name, "mem_reserve_head");
- env = getenv(name);
+ env = getenv("mem_reserve_head");
if (env) {
start[0] += ustrtoul(env, &endp, 0);
size[0] -= ustrtoul(env, &endp, 0);
}
- sprintf(name, "mem_reserve");
- env = getenv(name);
+ env = getenv("mem_reserve");
if (env)
size[0] -= ustrtoul(env, &endp, 0);
#include <common.h>
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
-#include <asm/ti-common/ti-aemif.h>
+#include <asm/ti-common/keystone_net.h>
DECLARE_GLOBAL_DATA_PTR;
static struct pll_init_data pa_pll_config =
PASS_PLL_983;
+#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
+struct eth_priv_t eth_priv_cfg[] = {
+ {
+ .int_name = "K2L_EMAC",
+ .rx_flow = 0,
+ .phy_addr = 0,
+ .slave_port = 1,
+ .sgmii_link_type = SGMII_LINK_MAC_PHY,
+ },
+ {
+ .int_name = "K2L_EMAC1",
+ .rx_flow = 8,
+ .phy_addr = 1,
+ .slave_port = 2,
+ .sgmii_link_type = SGMII_LINK_MAC_PHY,
+ },
+ {
+ .int_name = "K2L_EMAC2",
+ .rx_flow = 16,
+ .phy_addr = 2,
+ .slave_port = 3,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+ {
+ .int_name = "K2L_EMAC3",
+ .rx_flow = 32,
+ .phy_addr = 3,
+ .slave_port = 4,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+};
+
+int get_num_eth_ports(void)
+{
+ return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
+}
+#endif
+
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
ps7_init.[ch]
+ps7_init_gpl.[ch]
obj-y := board.o
-# Please copy ps7_init.c/h from hw project to this directory
+# Please copy ps7_init_gpl.c/h from hw project to this directory
obj-$(CONFIG_SPL_BUILD) += \
- $(if $(wildcard $(srctree)/$(src)/ps7_init.c), ps7_init.o)
+ $(if $(wildcard $(srctree)/$(src)/ps7_init_gpl.c), ps7_init_gpl.o, \
+ $(if $(wildcard $(srctree)/$(src)/ps7_init.c), ps7_init.o legacy.o))
# Suppress "warning: function declaration isn't a prototype"
+CFLAGS_REMOVE_ps7_init_gpl.o := -Wstrict-prototypes
CFLAGS_REMOVE_ps7_init.o := -Wstrict-prototypes
--- /dev/null
+
+#warning usage of ps7_init files is deprecated please use ps7_init_gpl
#define XIL_IO_H
/*
- * This empty file is here because ps7_init.c exported by hw project
+ * This empty file is here because ps7_init_gpl.c exported by hw project
* has #include "xil_io.h" line.
*/
o_string temp=NULL_O_STRING;
int rcode;
#ifdef __U_BOOT__
- int code = 0;
+ int code = 1;
#endif
do {
ctx.type = flag;
}
b_free(&temp);
/* loop on syntax errors, return on EOF */
- } while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP) &&
+ } while (rcode != 1 && !(flag & FLAG_EXIT_FROM_LOOP) &&
(inp->peek != static_peek || b_peek(inp)));
#ifndef __U_BOOT__
return 0;
#ifdef __U_BOOT__
char *p = NULL;
int rcode;
- if ( !s || !*s)
+ if (!s)
return 1;
+ if (!*s)
+ return 0;
if (!(p = strchr(s, '\n')) || *++p) {
p = xmalloc(strlen(s) + 2);
strcpy(p, s);
-de <net.h>
-
-#if !defined(CONFIG_UPDATE_TFTP)
-#error "CONFIG_UPDATE_TFTP required"
-#endif
-
-static int do_fitupd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong addr = 0Un the root directory of the source tree for details.
+/*
+ * (C) Copyright 2011
+ * Andreas Pretzsch, carpe noctem engineering, apr@cn-eng.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
mem_malloc_end = start + size;
mem_malloc_brk = start;
+ debug("using memory %#lx-%#lx for malloc()\n", mem_malloc_start,
+ mem_malloc_end);
+
memset((void *)mem_malloc_start, 0, size);
malloc_bin_reloc();
INTERNAL_SIZE_T nb;
#ifdef CONFIG_SYS_MALLOC_F_LEN
- if (!(gd->flags & GD_FLG_RELOC)) {
+ if (gd && !(gd->flags & GD_FLG_RELOC)) {
ulong new_ptr;
void *ptr;
}
} else {
debug("## No Flattened Device Tree\n");
- return 0;
+ goto error;
}
} else {
debug("## No Flattened Device Tree\n");
- return 0;
+ goto error;
}
*of_flat_tree = fdt_blob;
}
#endif
-#if defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
+#if defined(CONFIG_MPC823)
#define FB_PUT_BYTE(fb, from) *(fb)++ = (255 - *(from)++)
#else
#define FB_PUT_BYTE(fb, from) *(fb)++ = *(from)++
int lcd_display_bitmap(ulong bmp_image, int x, int y)
{
-#if !defined(CONFIG_MCC200)
ushort *cmap = NULL;
-#endif
ushort *cmap_base = NULL;
ushort i, j;
uchar *fb;
debug("Display-bmp: %d x %d with %d colors\n",
(int)width, (int)height, (int)colors);
-#if !defined(CONFIG_MCC200)
- /* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */
if (bmp_bpix == 8) {
cmap = configuration_get_cmap();
cmap_base = cmap;
#endif
}
}
-#endif
- /*
- * BMP format for Monochrome assumes that the state of a
- * pixel is described on a per Bit basis, not per Byte.
- * So, in case of Monochrome BMP we should align widths
- * on a byte boundary and convert them from Bit to Byte
- * units.
- * Probably, PXA250 and MPC823 process 1bpp BMP images in
- * their own ways, so make the converting to be MCC200
- * specific.
- */
-#if defined(CONFIG_MCC200)
- if (bpix == 1) {
- width = ((width + 7) & ~7) >> 3;
- x = ((x + 7) & ~7) >> 3;
- pwidth= ((pwidth + 7) & ~7) >> 3;
- }
-#endif
padded_width = (width & 0x3 ? (width & ~0x3) + 4 : width);
perq = usb_stor_buf[0];
modi = usb_stor_buf[1];
- if ((perq & 0x1f) == 0x1f) {
- /* skip unknown devices */
+ /*
+ * Skip unknown devices (0x1f) and enclosure service devices (0x0d),
+ * they would not respond to test_unit_ready .
+ */
+ if (((perq & 0x1f) == 0x1f) || ((perq & 0x1f) == 0x0d)) {
return 0;
}
if ((modi&0x80) == 0x80) {
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI"
CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb"
CONFIG_MMC_SUNXI_SLOT_EXTRA=1
+CONFIG_USB1_VBUS_PIN="PB10"
+S:CONFIG_MMC0_CD_PIN="PG1"
+S:CONFIG_MMC1_CD_PIN="PG13"
+S:CONFIG_ARM=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb"
+CONFIG_USB1_VBUS_PIN="PG11"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
+CONFIG_USB1_VBUS_PIN="PG11"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
CONFIG_FDTFILE="sun5i-a10s-auxtek-t004.dtb"
+CONFIG_USB1_VBUS_PIN="PG13"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN6I=y
-CONFIG_TARGET_COLOMBUS=y
+CONFIG_SPL=y
CONFIG_FDTFILE="sun6i-a31-colombus.dtb"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN6I=y
++S:CONFIG_TARGET_COLOMBUS=y
--- /dev/null
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI"
+CONFIG_FDTFILE="sun6i-a31-m9.dtb"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN6I=y
++S:CONFIG_TARGET_MELE_M9=y
+# Ethernet phy power
++S:CONFIG_AXP221_DLDO1_VOLT=3300
+# USB hub power
++S:CONFIG_AXP221_DLDO4_VOLT=3300
+# Wifi power
++S:CONFIG_AXP221_ALDO1_VOLT=3300
+# HDMI power ?
++S:CONFIG_AXP221_ALDO2_VOLT=1800
++S:CONFIG_AXP221_ALDO3_VOLT=3000
+# No Vbus gpio for usb1
++S:CONFIG_USB1_VBUS_PIN=""
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="NAND,NOR"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_CONS_INDEX=1
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_EVM=y
+CONFIG_NOR=y
-CONFIG_SYS_EXTRA_OPTIONS="NOR,NOR_BOOT"
CONFIG_CONS_INDEX=1
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+CONFIG_NOR=y
+CONFIG_NOR_BOOT=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
CONFIG_FDTFILE="sun4i-a10-ba10-tvbox.dtb"
+CONFIG_USB1_VBUS_PIN="PH12"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN4I=y
--- /dev/null
+CONFIG_SPL=n
++S:CONFIG_ARM=y
++S:CONFIG_OMAP34XX=y
++S:CONFIG_TARGET_CM_T3517=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="CONSOLE_COM12,MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="CONSOLE_COM12"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="CONSOLE_COM12,SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="CONSOLE_COM12,SYS_TEXT_BASE=0xFFF00000"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFFF00000"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
--- /dev/null
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6sabresd_spl.cfg,SPL,MX6Q"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_MX6SABRESD=y
+
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/kosagi/novena/setup.cfg,MX6Q,SPL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/kosagi/novena/setup.cfg,MX6Q"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_KOSAGI_NOVENA=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_DM_SERIAL=y
CONFIG_UNIPHIER_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
S:CONFIG_SPL_NAND_DENALI=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_DM_SERIAL=y
CONFIG_UNIPHIER_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
S:CONFIG_SPL_NAND_DENALI=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_DM_SERIAL=y
CONFIG_UNIPHIER_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
S:CONFIG_SPL_NAND_DENALI=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="PRS200"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="PRS200,MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="PRS200,SYS_TEXT_BASE=0xFFF00000"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
+++ /dev/null
-CONFIG_SYS_EXTRA_OPTIONS="PRS200,SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM"
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MCC200=y
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
CONFIG_FDTFILE="sun5i-a10s-r7-tv-dongle.dtb"
+CONFIG_USB1_VBUS_PIN="PG13"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
+S:CONFIG_MACH_SUN5I=y
--- /dev/null
+CONFIG_SPL=y
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_SOCFPGA_CYCLONE5=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates"
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q"
+CONFIG_ARM=y
+CONFIG_TARGET_TBS2910=y
--- /dev/null
+CONFIG_SPL=y
++S:CONFIG_ARM=y
++S:CONFIG_ZYNQ=y
++S:CONFIG_TARGET_ZYNQ_ZYBO=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="zynq-zybo"
image that can be flashed on the board NAND/SPI flash. The make target
which uses mkimage to produce such an image is "u-boot.kwb". For example:
- export BUILD_DIR=/tmp/build
+ export KBUILD_OUTPUT=/tmp/build
make distclean
make yourboard_config
- make $BUILD_DIR/u-boot.kwb
+ make u-boot.kwb
Board specific configuration file specifications:
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
-TOP5200 powerpc mpc5200 - - Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
-TOP860 powerpc mpc860 - - Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
-TOP9000 arm at91sam9xeXXX - - Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
+PRS200 powerpc mpc5200 - -
+MCC200 powerpc mpc5200 - -
+TOP5200 powerpc mpc5200 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
+TOP860 powerpc mpc860 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
+TOP9000 arm at91sam9xeXXX d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
TQM8272 powerpc mpc8260 f06f9a1 2014-10-27 Wolfgang Denk <wd@denx.de>
TQM8260 powerpc mpc8260 ccc1950 2014-10-27 Wolfgang Denk <wd@denx.de>
IDS8247 powerpc mpc8260 6afb357 2014-10-27 Heiko Schocher <hs@denx.de>
{
u32 j;
- if (qm_cfg == NULL)
- return;
-
queue_close(qm_cfg->qpool_num);
qm_cfg->mngr_cfg->link_ram_base0 = 0;
{
u32 regd;
- if (!qm_cfg)
- return;
-
cpu_to_bus((u32 *)hd, sizeof(struct qm_host_desc)/4);
regd = (u32)hd | ((sizeof(struct qm_host_desc) >> 4) - 1);
writel(regd, &qm_cfg->queue[qnum].ptr_size_thresh);
{
u32 uhd;
- if (!qm_cfg)
- return NULL;
-
uhd = readl(&qm_cfg->queue[qnum].ptr_size_thresh) & ~0xf;
if (uhd)
cpu_to_bus((u32 *)uhd, sizeof(struct qm_host_desc)/4);
struct qm_host_desc *qm_pop_from_free_pool(void)
{
- if (!qm_cfg)
- return NULL;
-
return qm_pop(qm_cfg->qpool_num);
}
* generic value.
*/
#ifndef CONFIG_I2C_TIMEOUT
-#define CONFIG_I2C_TIMEOUT 10000
+#define CONFIG_I2C_TIMEOUT 100000
#endif
#define I2C_READ_BIT 1
*
* Typical case is a Write of an addr followd by a Read. The
* IBM FAQ does not cover this. On the last byte of the write
- * we don't set the creg CHT bit, and on the first bytes of the
- * read we set the RPST bit.
+ * we don't set the creg CHT bit but the RPST bit.
*
* It does not support address only transfers, there must be
* a data part. If you want to write the address yourself, put
if ((!cmd_type && (ptr == addr)) || ((tran + bc) != cnt))
creg |= IIC_CNTL_CHT;
+ /* last part of address, prepare for repeated start on read */
+ if (cmd_type && (ptr == addr) && ((tran + bc) == cnt))
+ creg |= IIC_CNTL_RPST;
+
if (reading) {
creg |= IIC_CNTL_READ;
} else {
/* Transfer aborted? */
if (status & IIC_EXTSTS_XFRA)
result = IIC_NOK_XFRA;
+ /* Is bus free?
+ * If error happened during combined xfer
+ * IIC interface is usually stuck in some strange
+ * state without a valid stop condition.
+ * Brute, but working: generate stop, then soft reset.
+ */
+ if ((status & IIC_EXTSTS_BCS_MASK)
+ != IIC_EXTSTS_BCS_FREE){
+ u8 mdcntl = in_8(&i2c->mdcntl);
+
+ /* Generate valid stop condition */
+ out_8(&i2c->xtcntlss, IIC_XTCNTLSS_SRST);
+ out_8(&i2c->directcntl, IIC_DIRCNTL_SCC);
+ udelay(10);
+ out_8(&i2c->directcntl,
+ IIC_DIRCNTL_SCC | IIC_DIRCNTL_SDAC);
+ out_8(&i2c->xtcntlss, 0);
+
+ ppc4xx_i2c_init(adap, (mdcntl & IIC_MDCNTL_FSM)
+ ? 400000 : 100000, 0);
+ }
} else if ( status & IIC_STS_PT) {
result = IIC_NOK_TOUT;
}
cnt = data_len;
tran = 0;
reading = cmd_type;
- if (reading)
- creg = IIC_CNTL_RPST;
}
}
return result;
/* set slave address, receive */
writel((chip << 1) | 1, &dev->icmar);
- /* clear status */
- writel(0, &dev->icmsr);
/* start master receive */
writel(MCR_MDBS | MCR_MIE | MCR_ESG, &dev->icmcr);
+ /* clear status */
+ writel(0, &dev->icmsr);
while ((readl(&dev->icmsr) & (MSR_MAT | MSR_MDR))
!= (MSR_MAT | MSR_MDR))
# SPDX-License-Identifier: GPL-2.0+
#
+obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o
+obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o
obj-$(CONFIG_BFIN_SDH) += bfin_sdh.o
obj-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
+obj-$(CONFIG_DWMMC) += dw_mmc.o
+obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
obj-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
obj-$(CONFIG_FTSDC010) += ftsdc010_mci.o
obj-$(CONFIG_FTSDC021) += ftsdc021_sdhci.o
obj-$(CONFIG_GENERIC_MMC) += mmc.o
obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
+obj-$(CONFIG_KONA_SDHCI) += kona_sdhci.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
-obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o
+obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
obj-$(CONFIG_MV_SDHCI) += mv_sdhci.o
+obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o
obj-$(CONFIG_MXC_MMC) += mxcmmc.o
obj-$(CONFIG_MXS_MMC) += mxsmmc.o
obj-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
-obj-$(CONFIG_SDHCI) += sdhci.o
-obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o
-obj-$(CONFIG_KONA_SDHCI) += kona_sdhci.o
+obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
obj-$(CONFIG_S3C_SDI) += s3c_sdi.o
obj-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
+obj-$(CONFIG_SDHCI) += sdhci.o
obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o
+obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o
obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
-obj-$(CONFIG_DWMMC) += dw_mmc.o
-obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
-obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
-obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
-obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
+
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
else
obj-$(CONFIG_GENERIC_MMC) += mmc_write.o
endif
-obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o
+
if (cd_gpio < 0)
return 1;
- return gpio_get_value(cd_gpio);
+ /* NOTE: assumes card detect signal is active-low */
+ return !gpio_get_value(cd_gpio);
}
static int omap_hsmmc_getwp(struct mmc *mmc)
if (wp_gpio < 0)
return 0;
+ /* NOTE: assumes write protect signal is active-high */
return gpio_get_value(wp_gpio);
}
#endif
{
struct memac *regs = mac->base;
- setbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN);
+ setbits_be32(®s->command_config,
+ MEMAC_CMD_CFG_RXTX_EN | MEMAC_CMD_CFG_NO_LEN_CHK);
}
static void memac_disable_mac(struct fsl_enet_mac *mac)
if_mode &= ~IF_MODE_MASK;
if_mode |= (IF_MODE_GMII);
break;
+ case PHY_INTERFACE_MODE_XGMII:
+ if_mode &= ~IF_MODE_MASK;
+ if_mode |= IF_MODE_XGMII;
+ break;
default:
break;
}
- /* Enable automatic speed selection */
- if_mode |= IF_MODE_EN_AUTO;
+ /* Enable automatic speed selection for Non-XGMII */
+ if (type != PHY_INTERFACE_MODE_XGMII)
+ if_mode |= IF_MODE_EN_AUTO;
if (type == PHY_INTERFACE_MODE_RGMII) {
if_mode &= ~IF_MODE_EN_AUTO;
u32 c45 = 1;
if (dev_addr == MDIO_DEVAD_NONE) {
+ if (!strcmp(bus->name, DEFAULT_FM_TGEC_MDIO_NAME))
+ return 0xffff;
c45 = 0; /* clause 22 */
dev_addr = regnum & 0x1f;
clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
* is zero, so MDIO clock is disabled.
* So, for proper functioning of MDIO, MDIO_CLK_DIV bits needs to
* be properly initialized.
+ * NEG bit default should be '1' as per FMAN-v3 RM, but on platform
+ * like T2080QDS, this bit default is '0', which leads to MDIO failure
+ * on XAUI PHY, so set this bit definitely.
*/
setbits_be32(&((struct memac_mdio_controller *)info->regs)->mdio_stat,
- MDIO_STAT_CLKDIV(258));
+ MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG);
return mdio_register(bus);
}
writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN);
writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL);
-#ifdef CONFIG_K2E_EVM
+#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L)
/* Map RX packet flow priority to 0 */
writel(0, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RX_PRI_MAP);
#endif
keystone2_net_serdes_setup();
+ if (sys_has_mdio)
+ keystone2_mdio_reset(mdio_bus);
+
keystone_sgmii_config(phy_dev, eth_priv->slave_port - 1,
eth_priv->sgmii_link_type);
&ks2_serdes_sgmii_156p25mhz,
CONFIG_KSNET_SERDES_LANES_PER_SGMII);
-#ifdef CONFIG_SOC_K2E
+#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L)
ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII2_BASE,
&ks2_serdes_sgmii_156p25mhz,
CONFIG_KSNET_SERDES_LANES_PER_SGMII);
return 0;
}
+/**
+ * m88e1518_phy_writebits - write bits to a register
+ */
+void m88e1518_phy_writebits(struct phy_device *phydev,
+ u8 reg_num, u16 offset, u16 len, u16 data)
+{
+ u16 reg, mask;
+
+ if ((len + offset) >= 16)
+ mask = 0 - (1 << offset);
+ else
+ mask = (1 << (len + offset)) - (1 << offset);
+
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, reg_num);
+
+ reg &= ~mask;
+ reg |= data << offset;
+
+ phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg);
+}
+
+static int m88e1518_config(struct phy_device *phydev)
+{
+ /*
+ * As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512
+ * /88E1514 Rev A0, Errata Section 3.1
+ */
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x00ff); /* page 0xff */
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x214B);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2144);
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x0C28);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2146);
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xB233);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x214D);
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xCC0C);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2159);
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000); /* reg page 0 */
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 18); /* reg page 18 */
+ /* Write HWCFG_MODE = SGMII to Copper */
+ m88e1518_phy_writebits(phydev, 20, 0, 3, 1);
+
+ /* Phy reset */
+ m88e1518_phy_writebits(phydev, 20, 15, 1, 1);
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); /* reg page 18 */
+ udelay(100);
+ }
+
+ return m88e1111s_config(phydev);
+}
+
/* Marvell 88E1118 */
static int m88e1118_config(struct phy_device *phydev)
{
.uid = 0x1410dd1,
.mask = 0xffffff0,
.features = PHY_GBIT_FEATURES,
- .config = &m88e1111s_config,
+ .config = &m88e1518_config,
.startup = &m88e1011s_startup,
.shutdown = &genphy_shutdown,
};
static void smc911x_halt(struct eth_device *dev)
{
smc911x_reset(dev);
+ smc911x_handle_mac_address(dev);
}
static int smc911x_rx(struct eth_device *dev)
rdes0 = le32_to_cpu(rxptr->rdes0);
#ifdef RX_DEBUG
- printf("%s(): rxptr->rdes0=%x:%x\n", __FUNCTION__, rxptr->rdes0);
+ printf("%s(): rxptr->rdes0=%x\n", __FUNCTION__, rxptr->rdes0);
#endif
if (!(rdes0 & 0x80000000)) { /* packet owner check */
if ((rdes0 & 0x300) != 0x300) {
+config AXP221_POWER
+ boolean "axp221 pmic support"
+ depends on MACH_SUN6I
+ default y
+ ---help---
+ Say y here to enable support for the axp221 pmic found on most sun6i
+ (A31) boards.
+
+config AXP221_DLDO1_VOLT
+ int "axp221 dldo1 voltage"
+ depends on AXP221_POWER
+ default -1
+ ---help---
+ Set the voltage (mV) to program the axp221 dldo1 at, set to -1 to
+ disable dldo1.
+
+config AXP221_DLDO4_VOLT
+ int "axp221 dldo4 voltage"
+ depends on AXP221_POWER
+ default -1
+ ---help---
+ Set the voltage (mV) to program the axp221 dldo4 at, set to -1 to
+ disable dldo4.
+
+config AXP221_ALDO1_VOLT
+ int "axp221 aldo1 voltage"
+ depends on AXP221_POWER
+ default -1
+ ---help---
+ Set the voltage (mV) to program the axp221 aldo1 at, set to -1 to
+ disable aldo1.
+
+config AXP221_ALDO2_VOLT
+ int "axp221 aldo2 voltage"
+ depends on AXP221_POWER
+ default -1
+ ---help---
+ Set the voltage (mV) to program the axp221 aldo2 at, set to -1 to
+ disable aldo2.
+
+config AXP221_ALDO3_VOLT
+ int "axp221 aldo3 voltage"
+ depends on AXP221_POWER
+ default -1
+ ---help---
+ Set the voltage (mV) to program the axp221 aldo3 at, set to -1 to
+ disable aldo3.
obj-$(CONFIG_AXP152_POWER) += axp152.o
obj-$(CONFIG_AXP209_POWER) += axp209.o
+obj-$(CONFIG_AXP221_POWER) += axp221.o
obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o
obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o
obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o
--- /dev/null
+/*
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/arch/p2wi.h>
+#include <axp221.h>
+
+static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
+{
+ if (mvolt < min)
+ mvolt = min;
+ else if (mvolt > max)
+ mvolt = max;
+
+ return (mvolt - min) / div;
+}
+
+static int axp221_setbits(u8 reg, u8 bits)
+{
+ int ret;
+ u8 val;
+
+ ret = p2wi_read(reg, &val);
+ if (ret)
+ return ret;
+
+ val |= bits;
+ return p2wi_write(reg, val);
+}
+
+int axp221_set_dcdc1(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100);
+
+ ret = p2wi_write(AXP221_DCDC1_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL2,
+ AXP221_OUTPUT_CTRL2_DCDC1_EN);
+}
+
+int axp221_set_dcdc2(unsigned int mvolt)
+{
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
+
+ return p2wi_write(AXP221_DCDC2_CTRL, cfg);
+}
+
+int axp221_set_dcdc3(unsigned int mvolt)
+{
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20);
+
+ return p2wi_write(AXP221_DCDC3_CTRL, cfg);
+}
+
+int axp221_set_dcdc4(unsigned int mvolt)
+{
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
+
+ return p2wi_write(AXP221_DCDC4_CTRL, cfg);
+}
+
+int axp221_set_dcdc5(unsigned int mvolt)
+{
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50);
+
+ return p2wi_write(AXP221_DCDC5_CTRL, cfg);
+}
+
+int axp221_set_dldo1(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_DLDO1_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL2,
+ AXP221_OUTPUT_CTRL2_DLDO1_EN);
+}
+
+int axp221_set_dldo2(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_DLDO2_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL2,
+ AXP221_OUTPUT_CTRL2_DLDO2_EN);
+}
+
+int axp221_set_dldo3(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_DLDO3_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL2,
+ AXP221_OUTPUT_CTRL2_DLDO3_EN);
+}
+
+int axp221_set_dldo4(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_DLDO4_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL2,
+ AXP221_OUTPUT_CTRL2_DLDO4_EN);
+}
+
+int axp221_set_aldo1(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_ALDO1_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL1,
+ AXP221_OUTPUT_CTRL1_ALDO1_EN);
+}
+
+int axp221_set_aldo2(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_ALDO2_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL1,
+ AXP221_OUTPUT_CTRL1_ALDO2_EN);
+}
+
+int axp221_set_aldo3(unsigned int mvolt)
+{
+ int ret;
+ u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
+
+ ret = p2wi_write(AXP221_ALDO3_CTRL, cfg);
+ if (ret)
+ return ret;
+
+ return axp221_setbits(AXP221_OUTPUT_CTRL3,
+ AXP221_OUTPUT_CTRL3_ALDO3_EN);
+}
+
+int axp221_init(void)
+{
+ u8 axp_chip_id;
+ int ret;
+
+ p2wi_init();
+ ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
+ AXP221_INIT_DATA);
+ if (ret)
+ return ret;
+
+ ret = p2wi_read(AXP221_CHIP_ID, &axp_chip_id);
+ if (ret)
+ return ret;
+
+ if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
+ return -ENODEV;
+
+ return 0;
+}
static struct spi_slave *slave;
-void pmic_spi_free(struct spi_slave *slave)
-{
- if (slave)
- spi_free_slave(slave);
-}
-
-struct spi_slave *pmic_spi_probe(struct pmic *p)
-{
- return spi_setup_slave(p->bus,
- p->hw.spi.cs,
- p->hw.spi.clk,
- p->hw.spi.mode);
-}
-
static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write)
{
u32 pmic_tx, pmic_rx;
u32 tmp;
if (!slave) {
- slave = pmic_spi_probe(p);
+ slave = spi_setup_slave(p->bus, p->hw.spi.cs, p->hw.spi.clk,
+ p->hw.spi.mode);
if (!slave)
return -1;
tmp = cpu_to_be32(pmic_tx);
if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
- pmic_spi_flags)) {
- spi_release_bus(slave);
- return -1;
- }
+ pmic_spi_flags))
+ goto err;
if (write) {
pmic_tx = p->hw.spi.prepare_tx(reg, val, 0);
tmp = cpu_to_be32(pmic_tx);
if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
- pmic_spi_flags)) {
- spi_release_bus(slave);
- return -1;
- }
+ pmic_spi_flags))
+ goto err;
}
spi_release_bus(slave);
*val = cpu_to_be32(pmic_rx);
return 0;
+
+err:
+ spi_release_bus(slave);
+ return -1;
}
int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
+#include <linux/serial_reg.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <dm/device.h>
#define thr rbr
-/*
- * These are the definitions for the Line Control Register
- */
-#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
-
-/*
- * These are the definitions for the Line Status Register
- */
-#define UART_LSR_DR 0x01 /* Data ready */
-#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
-
struct uniphier_serial_private_data {
struct uniphier_serial __iomem *membase;
};
const unsigned int mode_x_div = 16;
unsigned int divisor;
- writeb(UART_LCR_WLS_8, &port->lcr);
+ writeb(UART_LCR_WLEN8, &port->lcr);
divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate);
+config USB_ARCH_HAS_HCD
+ def_bool y
+
+config USB
+ bool "Support for Host-side USB"
+ depends on USB_ARCH_HAS_HCD
+ ---help---
+ Universal Serial Bus (USB) is a specification for a serial bus
+ subsystem which offers higher speeds and more features than the
+ traditional PC serial port. The bus supplies power to peripherals
+ and allows for hot swapping. Up to 127 USB peripherals can be
+ connected to a single USB host in a tree structure.
+
+ The USB host is the root of the tree, the peripherals are the
+ leaves and the inner nodes are special USB devices called hubs.
+ Most PCs now have USB host ports, used to connect peripherals
+ such as scanners, keyboards, mice, modems, cameras, disks,
+ flash memory, network links, and printers to the PC.
+
+ Say Y here if your computer has a host-side USB port and you want
+ to use USB devices. You then need to say Y to at least one of the
+ Host Controller Driver (HCD) options below. Choose a USB 1.1
+ controller, such as "UHCI HCD support" or "OHCI HCD support",
+ and "EHCI HCD (USB 2.0) support" except for older systems that
+ do not have USB 2.0 support. It doesn't normally hurt to select
+ them all if you are not certain.
+
+ If your system has a device-side USB port, used in the peripheral
+ side of the USB protocol, see the "USB Gadget" framework instead.
+
+ After choosing your HCD, then select drivers for the USB peripherals
+ you'll be using. You may want to check out the information provided
+ in <file:Documentation/usb/> and especially the links given in
+ <file:Documentation/usb/usb-help.txt>.
+
+if USB
+
+source "drivers/usb/host/Kconfig"
+
+config USB_STORAGE
+ bool "USB Mass Storage support"
+ ---help---
+ Say Y here if you want to connect USB mass storage devices to your
+ board's USB port.
+
+endif
# new USB host ethernet layer dependencies
obj-$(CONFIG_USB_HOST_ETHER) += usb_ether.o
-ifdef CONFIG_USB_ETHER_ASIX
-obj-y += asix.o
-endif
+obj-$(CONFIG_USB_ETHER_ASIX) += asix.o
obj-$(CONFIG_USB_ETHER_MCS7830) += mcs7830.o
obj-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o
ifdef CONFIG_USB_GADGET
obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
+obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o
obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
obj-$(CONFIG_CI_UDC) += ci_udc.o
obj-$(CONFIG_THOR_FUNCTION) += f_thor.o
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/gpio.h>
#include "regs-otg.h"
#include <usb/lin_gadget_compat.h>
struct usb_gadget_driver *driver);
static int udc_enable(struct s3c_udc *dev);
static void udc_set_address(struct s3c_udc *dev, unsigned char address);
-static void reconfig_usbd(void);
+static void reconfig_usbd(struct s3c_udc *dev);
static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed);
static void nuke(struct s3c_ep *ep, int status);
static int s3c_udc_set_halt(struct usb_ep *_ep, int value);
void __iomem *regs_otg;
struct s3c_usbotg_reg *reg;
-struct s3c_usbotg_phy *phy;
-static unsigned int usb_phy_ctrl;
bool dfu_usb_get_reset(void)
{
return !!(readl(®->gintsts) & INT_RESET);
}
-void otg_phy_init(struct s3c_udc *dev)
-{
- dev->pdata->phy_control(1);
-
- /*USB PHY0 Enable */
- printf("USB PHY0 Enable\n");
-
- /* Enable PHY */
- writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl);
-
- if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */
- writel((readl(&phy->phypwr)
- &~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN)
- &~FORCE_SUSPEND_0), &phy->phypwr);
- else /* C110 GONI */
- writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
- &~FORCE_SUSPEND_0), &phy->phypwr);
-
- if (s5p_cpu_id == 0x4412)
- writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
- EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
- &phy->phyclk); /* PLL 24Mhz */
- else
- writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
- CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
-
- writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
- | PHY_SW_RST0, &phy->rstcon);
- udelay(10);
- writel(readl(&phy->rstcon)
- &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon);
- udelay(10);
-}
-
-void otg_phy_off(struct s3c_udc *dev)
-{
- /* reset controller just in case */
- writel(PHY_SW_RST0, &phy->rstcon);
- udelay(20);
- writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon);
- udelay(20);
-
- writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN
- | FORCE_SUSPEND_0, &phy->phypwr);
-
- writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl);
-
- writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)),
- &phy->phyclk);
-
- udelay(10000);
-
- dev->pdata->phy_control(0);
-}
+__weak void otg_phy_init(struct s3c_udc *dev) {}
+__weak void otg_phy_off(struct s3c_udc *dev) {}
/***********************************************************/
debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
otg_phy_init(dev);
- reconfig_usbd();
+ reconfig_usbd(dev);
debug_cond(DEBUG_SETUP != 0,
"S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n",
udc_reinit(dev);
}
-static void reconfig_usbd(void)
+static void reconfig_usbd(struct s3c_udc *dev)
{
/* 2. Soft-reset OTG Core and then unreset again. */
int i;
unsigned int uTemp = writel(CORE_SOFT_RESET, ®->grstctl);
+ uint32_t dflt_gusbcfg;
debug("Reseting OTG controller\n");
- writel(0<<15 /* PHY Low Power Clock sel*/
+ dflt_gusbcfg =
+ 0<<15 /* PHY Low Power Clock sel*/
|1<<14 /* Non-Periodic TxFIFO Rewind Enable*/
|0x5<<10 /* Turnaround time*/
|0<<9 | 0<<8 /* [0:HNP disable,1:HNP enable][ 0:SRP disable*/
|0<<6 /* 0: high speed utmi+, 1: full speed serial*/
|0<<4 /* 0: utmi+, 1:ulpi*/
|1<<3 /* phy i/f 0:8bit, 1:16bit*/
- |0x7<<0, /* HS/FS Timeout**/
- ®->gusbcfg);
+ |0x7<<0; /* HS/FS Timeout**/
+
+ if (dev->pdata->usb_gusbcfg)
+ dflt_gusbcfg = dev->pdata->usb_gusbcfg;
+
+ writel(dflt_gusbcfg, ®->gusbcfg);
/* 3. Put the OTG device core in the disconnected state.*/
uTemp = readl(®->dctl);
dev->pdata = pdata;
- phy = (struct s3c_usbotg_phy *)pdata->regs_phy;
reg = (struct s3c_usbotg_reg *)pdata->regs_otg;
- usb_phy_ctrl = pdata->usb_phy_ctrl;
/* regs_otg = (void *)pdata->regs_otg; */
--- /dev/null
+/*
+ * drivers/usb/gadget/s3c_udc_otg.c
+ * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers
+ *
+ * Copyright (C) 2008 for Samsung Electronics
+ *
+ * BSP Support for Samsung's UDC driver
+ * available at:
+ * git://git.kernel.org/pub/scm/linux/kernel/git/kki_ap/linux-2.6-samsung.git
+ *
+ * State machine bugfixes:
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Ported to u-boot:
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ * Lukasz Majewski <l.majewski@samsumg.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <linux/list.h>
+#include <malloc.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <asm/io.h>
+
+#include <asm/mach-types.h>
+
+#include "regs-otg.h"
+#include <usb/lin_gadget_compat.h>
+
+#include <usb/s3c_udc.h>
+
+void otg_phy_init(struct s3c_udc *dev)
+{
+ unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
+ struct s3c_usbotg_phy *phy =
+ (struct s3c_usbotg_phy *)dev->pdata->regs_phy;
+
+ dev->pdata->phy_control(1);
+
+ /* USB PHY0 Enable */
+ printf("USB PHY0 Enable\n");
+
+ /* Enable PHY */
+ writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl);
+
+ if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */
+ writel((readl(&phy->phypwr)
+ &~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN)
+ &~FORCE_SUSPEND_0), &phy->phypwr);
+ else /* C110 GONI */
+ writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
+ &~FORCE_SUSPEND_0), &phy->phypwr);
+
+ if (s5p_cpu_id == 0x4412)
+ writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
+ EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
+ &phy->phyclk); /* PLL 24Mhz */
+ else
+ writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
+ CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
+
+ writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
+ | PHY_SW_RST0, &phy->rstcon);
+ udelay(10);
+ writel(readl(&phy->rstcon)
+ &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon);
+ udelay(10);
+}
+
+void otg_phy_off(struct s3c_udc *dev)
+{
+ unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
+ struct s3c_usbotg_phy *phy =
+ (struct s3c_usbotg_phy *)dev->pdata->regs_phy;
+
+ /* reset controller just in case */
+ writel(PHY_SW_RST0, &phy->rstcon);
+ udelay(20);
+ writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon);
+ udelay(20);
+
+ writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN
+ | FORCE_SUSPEND_0, &phy->phypwr);
+
+ writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl);
+
+ writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)),
+ &phy->phyclk);
+
+ udelay(10000);
+
+ dev->pdata->phy_control(0);
+}
debug_cond(DEBUG_ISR,
"\t\tOTG core got reset (%d)!!\n",
reset_available);
- reconfig_usbd();
+ reconfig_usbd(dev);
dev->ep0state = WAIT_FOR_SETUP;
reset_available = 0;
s3c_udc_pre_setup();
--- /dev/null
+#
+# USB Host Controller Drivers
+#
+comment "USB Host Controller Drivers"
+
+config USB_XHCI_HCD
+ bool "xHCI HCD (USB 3.0) support"
+ ---help---
+ The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+ "SuperSpeed" host controller hardware.
+
+config USB_XHCI
+ bool
+ default USB_XHCI_HCD
+ ---help---
+ TODO: rename after most boards switch to Kconfig
+
+if USB_XHCI_HCD
+
+endif
+
+config USB_EHCI_HCD
+ bool "EHCI HCD (USB 2.0) support"
+ ---help---
+ The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
+ "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
+ If your USB host controller supports USB 2.0, you will likely want to
+ configure this Host Controller Driver.
+
+ EHCI controllers are packaged with "companion" host controllers (OHCI
+ or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
+ will connect to EHCI if the device is high speed, otherwise they
+ connect to a companion controller. If you configure EHCI, you should
+ probably configure the OHCI (for NEC and some other vendors) USB Host
+ Controller Driver or UHCI (for Via motherboards) Host Controller
+ Driver too.
+
+ You may want to read <file:Documentation/usb/ehci.txt>.
+
+config USB_EHCI
+ bool
+ default USB_EHCI_HCD
+ ---help---
+ TODO: rename after most boards switch to Kconfig
+
+if USB_EHCI_HCD
+
+config USB_EHCI_UNIPHIER
+ bool "Support for Panasonic UniPhier on-chip EHCI USB controller"
+ depends on ARCH_UNIPHIER
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on Panasonic
+ UniPhier SoCs.
+
+endif
obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
+obj-$(CONFIG_USB_EHCI_UNIPHIER) += ehci-uniphier.o
obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
#include "ehci.h"
#if defined(CONFIG_R8A7740)
-static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
+static u32 usb_base_address[] = {
0xC6700000
};
#elif defined(CONFIG_R8A7790)
-static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
+static u32 usb_base_address[] = {
0xEE080000, /* USB0 (EHCI) */
0xEE0A0000, /* USB1 */
0xEE0C0000, /* USB2 */
};
#elif defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \
defined(CONFIG_R8A7794)
-static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
+static u32 usb_base_address[] = {
0xEE080000, /* USB0 (EHCI) */
0xEE0C0000, /* USB1 */
};
if (!i)
printf("error : ehci(%d) reset failed.\n", index);
- if (index == (CONFIG_USB_MAX_CONTROLLER_COUNT - 1))
+ if (index == (ARRAY_SIZE(usb_base_address) - 1))
setbits_le32(SMSTPCR7, SMSTPCR703);
return 0;
*/
#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <common.h>
#include "ehci.h"
-#define SUNXI_USB1_IO_BASE 0x01c14000
-#define SUNXI_USB2_IO_BASE 0x01c1c000
-
#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
-#define SUNXI_USB_CSR 0x01c13404
+#define SUNXI_USB_CSR 0x404
#define SUNXI_USB_PASSBY_EN 1
#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
int usb_rst_mask;
int ahb_clk_mask;
int gpio_vbus;
- void *csr;
int irq;
int id;
} sunxi_echi_hcd[] = {
{
- .usb_rst_mask = CCM_USB_CTRL_PHY1_RST,
+ .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0,
- .gpio_vbus = CONFIG_SUNXI_USB_VBUS0_GPIO,
- .csr = (void *)SUNXI_USB_CSR,
+#ifndef CONFIG_MACH_SUN6I
.irq = 39,
+#else
+ .irq = 72,
+#endif
.id = 1,
},
#if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1)
{
- .usb_rst_mask = CCM_USB_CTRL_PHY2_RST,
+ .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
.ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1,
- .gpio_vbus = CONFIG_SUNXI_USB_VBUS1_GPIO,
- .csr = (void *)SUNXI_USB_CSR,
+#ifndef CONFIG_MACH_SUN6I
.irq = 40,
+#else
+ .irq = 74,
+#endif
.id = 2,
}
#endif
static void *get_io_base(int hcd_id)
{
- if (hcd_id == 1)
- return (void *)SUNXI_USB1_IO_BASE;
- else if (hcd_id == 2)
- return (void *)SUNXI_USB2_IO_BASE;
- else
+ switch (hcd_id) {
+ case 0:
+ return (void *)SUNXI_USB0_BASE;
+ case 1:
+ return (void *)SUNXI_USB1_BASE;
+ case 2:
+ return (void *)SUNXI_USB2_BASE;
+ default:
return NULL;
+ }
+}
+
+static int get_vbus_gpio(int hcd_id)
+{
+ switch (hcd_id) {
+ case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
+ case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
+ }
+ return -1;
}
static void usb_phy_write(struct sunxi_ehci_hcd *sunxi_ehci, int addr,
int data, int len)
{
int j = 0, usbc_bit = 0;
- void *dest = sunxi_ehci->csr;
+ void *dest = get_io_base(0) + SUNXI_USB_CSR;
usbc_bit = 1 << (sunxi_ehci->id * 2);
for (j = 0; j < len; j++) {
usb_phy_write(sunxi_ehci, 0x20, 0x14, 5);
/* threshold adjustment disconnect */
-#ifdef CONFIG_MACH_SUN4I
+#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I
usb_phy_write(sunxi_ehci, 0x2a, 3, 2);
#else
usb_phy_write(sunxi_ehci, 0x2a, 2, 2);
setbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask);
setbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask);
+#ifdef CONFIG_MACH_SUN6I
+ setbits_le32(&ccm->ahb_reset0_cfg, sunxi_ehci->ahb_clk_mask);
+#endif
sunxi_usb_phy_init(sunxi_ehci);
sunxi_usb_passby(sunxi_ehci, SUNXI_USB_PASSBY_EN);
- gpio_direction_output(sunxi_ehci->gpio_vbus, 1);
+ if (sunxi_ehci->gpio_vbus != -1)
+ gpio_direction_output(sunxi_ehci->gpio_vbus, 1);
}
static void sunxi_ehci_disable(struct sunxi_ehci_hcd *sunxi_ehci)
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- gpio_direction_output(sunxi_ehci->gpio_vbus, 0);
+ if (sunxi_ehci->gpio_vbus != -1)
+ gpio_direction_output(sunxi_ehci->gpio_vbus, 0);
sunxi_usb_passby(sunxi_ehci, !SUNXI_USB_PASSBY_EN);
+#ifdef CONFIG_MACH_SUN6I
+ clrbits_le32(&ccm->ahb_reset0_cfg, sunxi_ehci->ahb_clk_mask);
+#endif
clrbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask);
clrbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask);
}
struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
int err;
+ sunxi_ehci->gpio_vbus = get_vbus_gpio(sunxi_ehci->id);
+
/* enable common PHY only once */
if (index == 0)
setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
- err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus");
- if (err)
- return err;
+ if (sunxi_ehci->gpio_vbus != -1) {
+ err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus");
+ if (err)
+ return err;
+ }
sunxi_ehci_enable(sunxi_ehci);
sunxi_ehci_disable(sunxi_ehci);
- err = gpio_free(sunxi_ehci->gpio_vbus);
- if (err)
- return err;
+ if (sunxi_ehci->gpio_vbus != -1) {
+ err = gpio_free(sunxi_ehci->gpio_vbus);
+ if (err)
+ return err;
+ }
/* disable common PHY only once, for the last enabled hcd */
if (enabled_hcd_count == 1)
--- /dev/null
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/arch/ehci-uniphier.h>
+#include "ehci.h"
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
+ struct ehci_hcor **hcor)
+{
+ struct ehci_hccr *cr;
+ struct ehci_hcor *or;
+
+ uniphier_ehci_reset(index, 0);
+
+ cr = (struct ehci_hccr *)(uniphier_ehci_platdata[index].base);
+ or = (void *)cr + HC_LENGTH(ehci_readl(&cr->cr_capbase));
+
+ *hccr = cr;
+ *hcor = or;
+
+ return 0;
+}
+
+int ehci_hcd_stop(int index)
+{
+ uniphier_ehci_reset(index, 1);
+
+ return 0;
+}
uint32_t or_usbcmd;
#define CMD_PARK (1 << 11) /* enable "park" */
#define CMD_PARK_CNT(c) (((c) >> 8) & 3) /* how many transfers to park */
-#define CMD_ASE (1 << 5) /* async schedule enable */
#define CMD_LRESET (1 << 7) /* partial reset */
-#define CMD_IAAD (1 << 5) /* "doorbell" interrupt */
+#define CMD_IAAD (1 << 6) /* "doorbell" interrupt */
+#define CMD_ASE (1 << 5) /* async schedule enable */
#define CMD_PSE (1 << 4) /* periodic schedule enable */
#define CMD_RESET (1 << 1) /* reset HC not bus */
#define CMD_RUN (1 << 0) /* start/stop HC */
static void video_puts(struct stdio_dev *dev, const char *s)
{
+ int flush = cfb_do_flush_cache;
int count = strlen(s);
+ /* temporarily disable cache flush */
+ cfb_do_flush_cache = 0;
+
while (count--)
video_putc(dev, *s++);
+
+ if (flush) {
+ cfb_do_flush_cache = flush;
+ flush_cache(VIDEO_FB_ADRS, VIDEO_SIZE);
+ }
}
/*
uint64_t crc = salt;
if (table[128] == 0) {
- uint64_t *ct;
+ uint64_t *ct = NULL;
int i, j;
for (i = 0; i < 256; i++) {
for (ct = table + i, *ct = i, j = 8; j > 0; j--)
}
printf("unknown ZAP type\n");
+ free(zapbuf);
return ZFS_ERR_BAD_FS;
}
return ret;
}
printf("unknown ZAP type\n");
+ free(zapbuf);
return 0;
}
ubbest = malloc(sizeof(*ubbest));
if (!ubbest) {
+ free(ub_array);
zfs_unmount(data);
return 0;
}
if (err) {
printf("couldn't zio_read object directory\n");
zfs_unmount(data);
+ free(osp);
free(ubbest);
return 0;
}
hdrsize = SA_HDR_SIZE(((sa_hdr_phys_t *) sahdrp));
file->size = *(uint64_t *) ((char *) sahdrp + hdrsize + SA_SIZE_OFFSET);
+ if ((data->dnode.dn.dn_bonuslen == 0) &&
+ (data->dnode.dn.dn_flags & DNODE_FLAG_SPILL_BLKPTR))
+ free(sahdrp);
} else {
file->size = zfs_to_cpu64(((znode_phys_t *) DN_BONUS(&data->dnode.dn))->zp_size, data->dnode.endian);
}
--- /dev/null
+/*
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * X-Powers AXP221 Power Management IC driver
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define AXP221_CHIP_ADDR 0x68
+#define AXP221_CTRL_ADDR 0x3e
+#define AXP221_INIT_DATA 0x3e
+
+#define AXP221_CHIP_ID 0x03
+#define AXP221_OUTPUT_CTRL1 0x10
+#define AXP221_OUTPUT_CTRL1_ALDO1_EN (1 << 6)
+#define AXP221_OUTPUT_CTRL1_ALDO2_EN (1 << 7)
+#define AXP221_OUTPUT_CTRL2 0x12
+#define AXP221_OUTPUT_CTRL2_DLDO1_EN (1 << 3)
+#define AXP221_OUTPUT_CTRL2_DLDO2_EN (1 << 4)
+#define AXP221_OUTPUT_CTRL2_DLDO3_EN (1 << 5)
+#define AXP221_OUTPUT_CTRL2_DLDO4_EN (1 << 6)
+#define AXP221_OUTPUT_CTRL2_DCDC1_EN (1 << 7)
+#define AXP221_OUTPUT_CTRL3 0x13
+#define AXP221_OUTPUT_CTRL3_ALDO3_EN (1 << 7)
+#define AXP221_DLDO1_CTRL 0x15
+#define AXP221_DLDO2_CTRL 0x16
+#define AXP221_DLDO3_CTRL 0x17
+#define AXP221_DLDO4_CTRL 0x18
+#define AXP221_DCDC1_CTRL 0x21
+#define AXP221_DCDC2_CTRL 0x22
+#define AXP221_DCDC3_CTRL 0x23
+#define AXP221_DCDC4_CTRL 0x24
+#define AXP221_DCDC5_CTRL 0x25
+#define AXP221_ALDO1_CTRL 0x28
+#define AXP221_ALDO2_CTRL 0x28
+#define AXP221_ALDO3_CTRL 0x2a
+
+int axp221_set_dcdc1(unsigned int mvolt);
+int axp221_set_dcdc2(unsigned int mvolt);
+int axp221_set_dcdc3(unsigned int mvolt);
+int axp221_set_dcdc4(unsigned int mvolt);
+int axp221_set_dcdc5(unsigned int mvolt);
+int axp221_set_dldo1(unsigned int mvolt);
+int axp221_set_dldo2(unsigned int mvolt);
+int axp221_set_dldo3(unsigned int mvolt);
+int axp221_set_dldo4(unsigned int mvolt);
+int axp221_set_aldo1(unsigned int mvolt);
+int axp221_set_aldo2(unsigned int mvolt);
+int axp221_set_aldo3(unsigned int mvolt);
+int axp221_init(void);
#define CONFIG_HAS_FSL_DR_USB
#endif
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT "nand0=ff800000.flash,"
+#define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:1m(uboot)," \
+ "8m(kernel),512k(dtb),-(fs)"
+/*
+ * Override partitions in device tree using info
+ * in "mtdparts" environment variable
+ */
+#ifdef CONFIG_CMD_MTDPARTS
+#define CONFIG_FDT_FIXUP_PARTITIONS
+#endif
+
/*
* Environment Configuration
*/
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#endif
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash,"
+#define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \
+ "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \
+ "8m(kernel),512k(dtb),-(fs)"
+#endif
+/*
+ * Override partitions in device tree using info
+ * in "mtdparts" environment variable
+ */
+#ifdef CONFIG_CMD_MTDPARTS
+#define CONFIG_FDT_FIXUP_PARTITIONS
+#endif
+
/*
* Environment Configuration
*/
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
#endif
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#ifdef CONFIG_PHYS_64BIT
+#define MTDIDS_DEFAULT "nor0=fe8000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \
+ "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
+ "512k(dtb),768k(u-boot)"
+#else
+#define MTDIDS_DEFAULT "nor0=e8000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \
+ "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
+ "512k(dtb),768k(u-boot)"
+#endif
+
/*
* Environment
*/
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
+/* CPLD on IFC */
+#define CONFIG_SYS_CPLD_BASE 0xffdf0000
+#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
+#define CONFIG_SYS_CSPR3_EXT (0xf)
+#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+
+#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024)
+#define CONFIG_SYS_CSOR3 0x0
+
+/* CPLD Timing parameters for IFC CS3 */
+#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
+ FTIM0_GPCM_TEADC(0x0e) | \
+ FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
+ FTIM1_GPCM_TRAD(0x1f))
+#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
+ FTIM2_GPCM_TCH(0x0) | \
+ FTIM2_GPCM_TWP(0x1f))
+#define CONFIG_SYS_CS3_FTIM3 0x0
+
#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
+#ifndef CONFIG_SPL_USBETH_SUPPORT
+/* Fastboot */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
+#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000
+
+/* To support eMMC booting */
+#define CONFIG_STORAGE_EMMC
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
+#endif
+
#ifdef CONFIG_MUSB_HOST
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
/* USB TI's IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0403
-#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
+#define CONFIG_G_DNL_VENDOR_NUM 0x0451
+#define CONFIG_G_DNL_PRODUCT_NUM 0xD022
#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
#endif /* CONFIG_MUSB_GADGET */
# define CONFIG_CMD_FAT
# define CONFIG_CMD_MMC
# define CONFIG_DOS_PARTITION
+# define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
# endif
# ifdef CONFIG_MMC_SPI
# define CONFIG_CMD_MMC_SPI
--- /dev/null
+/*
+ * (C) Copyright 2013 CompuLab, Ltd.
+ * Author: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * Configuration settings for the CompuLab CM-T3517 board
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_OMAP /* in a TI OMAP core */
+#define CONFIG_CM_T3517 /* working with CM-T3517 */
+#define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
+/*
+ * This is needed for the DMA stuff.
+ * Although the default iss 64, we still define it
+ * to be on the safe side once the default is changed.
+ */
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_OF_LIBFDT
+/*
+ * The early kernel mapping on ARM currently only maps from the base of DRAM
+ * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000.
+ * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
+ * so that leaves DRAM base to DRAM base + 0x4000 available.
+ */
+#define CONFIG_SYS_BOOTMAPSZ 0x4000
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SERIAL_TAG
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3 3 /* UART3 */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
+ 115200}
+
+#define CONFIG_OMAP_GPIO
+
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#define CONFIG_USB_MUSB_AM35X
+
+#ifndef CONFIG_USB_MUSB_AM35X
+#define CONFIG_USB_OMAP3
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
+#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
+#else /* !CONFIG_USB_MUSB_AM35X */
+#define CONFIG_MUSB_HOST
+#define CONFIG_MUSB_PIO_ONLY
+#endif /* CONFIG_USB_MUSB_AM35X */
+
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
+ "1920k(u-boot),256k(u-boot-env),"\
+ "4m(kernel),-(fs)"
+
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_GPIO
+
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMLS /* List all found images */
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_BUS 0
+#define CONFIG_I2C_MULTI_BUS
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_SYS_NAND_QUIET_TEST
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
+ /* to access nand */
+#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
+ /* to access nand at */
+ /* CS0 */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
+ /* devices */
+
+/* Environment information */
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x82000000\0" \
+ "baudrate=115200\0" \
+ "console=ttyO2,115200n8\0" \
+ "mpurate=auto\0" \
+ "vram=12M\0" \
+ "dvimode=1024x768MR-16@60\0" \
+ "defaultdisplay=dvi\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
+ "mmcrootfstype=ext4\0" \
+ "nandroot=/dev/mtdblock4 rw\0" \
+ "nandrootfstype=ubifs\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "vram=${vram} " \
+ "omapfb.mode=dvi:${dvimode} " \
+ "omapdss.def_disp=${defaultdisplay} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "vram=${vram} " \
+ "omapfb.mode=dvi:${dvimode} " \
+ "omapdss.def_disp=${defaultdisplay} " \
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${loadaddr} 2a0000 400000; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run nandboot; " \
+ "fi; " \
+ "fi; " \
+ "else run nandboot; fi"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_TIMESTAMP
+#define CONFIG_SYS_AUTOLOAD "no"
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT "CM-T3517 # "
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000)
+
+/*
+ * AM3517 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+#define CONFIG_SYS_CS0_SIZE (256 << 20)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+#define CONFIG_ENV_IS_IN_NAND
+#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
+#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
+
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_MII
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20))
+#endif /* CONFIG_CMD_NET */
+
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* Status LED */
+#define CONFIG_STATUS_LED /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_GPIO_LED
+#define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */
+#define GREEN_LED_DEV 0
+#define STATUS_LED_BIT GREEN_LED_GPIO
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT GREEN_LED_DEV
+
+/* GPIO banks */
+#ifdef CONFIG_STATUS_LED
+#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
+#endif
+
+/* Display Configuration */
+#define CONFIG_OMAP3_GPIO_2
+#define CONFIG_OMAP3_GPIO_5
+#define CONFIG_VIDEO_OMAP3
+#define LCD_BPP LCD_COLOR16
+
+#define CONFIG_LCD
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASHIMAGE_GUARD
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_SCF0403_LCD
+
+#define CONFIG_OMAP3_SPI
+
+#endif /* __CONFIG_H */
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW 2
/* U-Boot general configuration */
#define CONFIG_SYS_PROMPT "K2E EVM # "
-#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\
- "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0"
-
-#define KS2_FDT_NAME "name_fdt=k2e-evm.dtb\0"
-#define KS2_ADDR_MON "addr_mon=0x0c140000\0"
-#define KS2_NAME_MON "name_mon=skern-k2e-evm.bin\0"
-#define NAME_UBOOT "name_uboot=u-boot-spi-k2e-evm.gph\0"
-#define NAME_UBI "name_ubi=k2e-evm-ubifs.ubi\0"
+#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+ "addr_mon=0x0c140000\0" \
+ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \
+ "name_fdt=uImage-k2e-evm.dtb\0" \
+ "name_mon=skern-k2e-evm.bin\0" \
+ "name_ubi=k2e-evm-ubifs.ubi\0" \
+ "name_uboot=u-boot-spi-k2e-evm.gph\0" \
+ "name_fs=arago-console-image-k2e-evm.cpio.gz\0"
#include <configs/ks2_evm.h>
#define CONFIG_SYS_NAND_PAGE_2K
/* Network */
-#define CONFIG_DRIVER_TI_KEYSTONE_NET
-#define CONFIG_TI_KSNAV
-#define CONFIG_KSNAV_PKTDMA_NETCP
#define CONFIG_KSNET_NETCP_V1_5
#define CONFIG_KSNET_CPSW_NUM_PORTS 9
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
-/* SerDes */
-#define CONFIG_TI_KEYSTONE_SERDES
-
#endif /* __CONFIG_K2E_EVM_H */
/* U-Boot general configuration */
#define CONFIG_SYS_PROMPT "K2HK EVM # "
-#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\
- "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0"
-
-#define KS2_FDT_NAME "name_fdt=k2hk-evm.dtb\0"
-#define KS2_ADDR_MON "addr_mon=0x0c5f0000\0"
-#define KS2_NAME_MON "name_mon=skern-k2hk-evm.bin\0"
-#define NAME_UBOOT "name_uboot=u-boot-spi-k2hk-evm.gph\0"
-#define NAME_UBI "name_ubi=k2hk-evm-ubifs.ubi\0"
+#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+ "addr_mon=0x0c5f0000\0" \
+ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \
+ "name_fdt=uImage-k2hk-evm.dtb\0" \
+ "name_mon=skern-k2hk-evm.bin\0" \
+ "name_ubi=k2hk-evm-ubifs.ubi\0" \
+ "name_uboot=u-boot-spi-k2hk-evm.gph\0" \
+ "name_fs=arago-console-image-k2hk-evm.cpio.gz\0"
#include <configs/ks2_evm.h>
#define CONFIG_SYS_NAND_PAGE_2K
/* Network */
-#define CONFIG_DRIVER_TI_KEYSTONE_NET
-#define CONFIG_TI_KSNAV
-#define CONFIG_KSNAV_PKTDMA_NETCP
#define CONFIG_KSNET_NETCP_V1_0
#define CONFIG_KSNET_CPSW_NUM_PORTS 5
-/* SerDes */
-#define CONFIG_TI_KEYSTONE_SERDES
-
#endif /* __CONFIG_K2HK_EVM_H */
/* U-Boot general configuration */
#define CONFIG_SYS_PROMPT "K2L EVM # "
-#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\
- "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0"
-
-#define KS2_FDT_NAME "name_fdt=k2l-evm.dtb\0"
-#define KS2_ADDR_MON "addr_mon=0x0c140000\0"
-#define KS2_NAME_MON "name_mon=skern-k2l-evm.bin\0"
-#define NAME_UBOOT "name_uboot=u-boot-spi-k2l-evm.gph\0"
-#define NAME_UBI "name_ubi=k2l-evm-ubifs.ubi\0"
+#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+ "addr_mon=0x0c140000\0" \
+ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0" \
+ "name_fdt=uImage-k2l-evm.dtb\0" \
+ "name_mon=skern-k2l-evm.bin\0" \
+ "name_ubi=k2l-evm-ubifs.ubi\0" \
+ "name_uboot=u-boot-spi-k2l-evm.gph\0" \
+ "name_fs=arago-console-image-k2l-evm.cpio.gz\0"
#include <configs/ks2_evm.h>
/* NAND Configuration */
#define CONFIG_SYS_NAND_PAGE_4K
+/* Network */
+#define CONFIG_KSNET_NETCP_V1_5
+#define CONFIG_KSNET_CPSW_NUM_PORTS 5
+#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
+
#endif /* __CONFIG_K2L_EVM_H */
#ifndef __CONFIG_KM83XX_H
#define __CONFIG_KM83XX_H
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
#include "km-powerpc.h"
#ifndef _CONFIG_KM_ARM_H
#define _CONFIG_KM_ARM_H
+#define CONFIG_SYS_GENERIC_BOARD
+
/* We got removed from Linux mach-types.h */
#define MACH_TYPE_KM_KIRKWOOD 2255
#define CONFIG_PHYS_64BIT
#define CONFIG_PPC_P2041
-#define CONFIG_SYS_TEXT_BASE 0xfff80000
+#define CONFIG_SYS_TEXT_BASE 0xfff40000
#define CONFIG_KM_DEF_NETDEV "netdev=eth0\0"
#define CONFIG_NAND_ECC_BCH
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
/* common KM defines */
#include "keymile-common.h"
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
/* Serial Port - controlled on board with jumper J8
#error ("Board unsupported")
#endif
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
#define CONFIG_SYS_TEXT_BASE 0xFE000000
/* include common defines/options for all Keymile boards */
#define CONFIG_SYS_SGMII_RATESCALE 2
/* Keyston Navigator Configuration */
+#define CONFIG_TI_KSNAV
#define CONFIG_KSNAV_QM_BASE_ADDRESS KS2_QM_BASE_ADDRESS
#define CONFIG_KSNAV_QM_CONF_BASE KS2_QM_CONF_BASE
#define CONFIG_KSNAV_QM_DESC_SETUP_BASE KS2_QM_DESC_SETUP_BASE
#define CONFIG_KSNAV_QM_QPOOL_NUM KS2_QM_QPOOL_NUM
/* NETCP pktdma */
+#define CONFIG_KSNAV_PKTDMA_NETCP
#define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE KS2_NETCP_PDMA_CTRL_BASE
#define CONFIG_KSNAV_NETCP_PDMA_TX_BASE KS2_NETCP_PDMA_TX_BASE
#define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM KS2_NETCP_PDMA_TX_CH_NUM
#define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE KS2_NETCP_PDMA_TX_SND_QUEUE
/* Keystone net */
+#define CONFIG_DRIVER_TI_KEYSTONE_NET
#define CONFIG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR
#define CONFIG_KSNET_NETCP_BASE KS2_NETCP_BASE
#define CONFIG_KSNET_SERDES_SGMII_BASE KS2_SGMII_SERDES_BASE
#define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE
#define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES
+/* SerDes */
+#define CONFIG_TI_KEYSTONE_SERDES
+
/* AEMIF */
#define CONFIG_TI_AEMIF
#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
#define CONFIG_CMD_SF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
/* U-Boot general configuration */
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_EXTRA_ENV_SETTINGS \
- "boot=ramfs\0" \
+ CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+ "boot=ubi\0" \
"tftp_root=/\0" \
"nfs_root=/export\0" \
"mem_lpae=1\0" \
"mem_reserve=512M\0" \
"addr_fdt=0x87000000\0" \
"addr_kern=0x88000000\0" \
- KS2_ADDR_MON \
"addr_uboot=0x87000000\0" \
"addr_fs=0x82000000\0" \
"addr_ubi=0x82000000\0" \
"addr_secdb_key=0xc000000\0" \
"fdt_high=0xffffffff\0" \
- KS2_FDT_NAME \
- "name_fs=arago-console-image.cpio.gz\0" \
- "name_kern=uImage\0" \
- KS2_NAME_MON \
- NAME_UBOOT \
- NAME_UBI \
+ "name_kern=uImage-keystone-evm.bin\0" \
"run_mon=mon_install ${addr_mon}\0" \
"run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
"init_net=run args_all args_net\0" \
"init_ubi=run args_all args_ubi; " \
- "ubi part ubifs; ubifsmount boot;" \
+ "ubi part ubifs; ubifsmount ubi:boot;" \
"ubifsload ${addr_secdb_key} securedb.key.bin;\0" \
"get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
"get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
"burn_uboot_nand=nand erase 0 0x100000; " \
"nand write ${addr_uboot} 0 ${filesize}\0" \
"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \
- KS2_ARGS_UBI \
"args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
"${nfs_options} ip=dhcp\0" \
+++ /dev/null
-/*
- * (C) Copyright 2006-2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC5200
-#define CONFIG_MCC200 1 /* MCC200 board */
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFC000000 boot low (standard configuration)
- * 0xFFF00000 boot high
- * 0x00100000 boot from RAM (for testing only)
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xFC000000
-#endif
-
-#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_HIGH_BATS 1 /* High BATs supported */
-
-/*
- * Serial console configuration
- *
- * To select console on the one of 8 external UARTs,
- * define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART,
- * or as 5, 6, 7, or 8 for the second Quad UART.
- * COM11, COM12, COM13, COM14 are located on the second Quad UART.
- *
- * CONFIG_PSC_CONSOLE must be undefined in this case.
- */
-#if !defined(CONFIG_PRS200)
-/* MCC200 configuration: */
-#ifdef CONFIG_CONSOLE_COM12
-#define CONFIG_QUART_CONSOLE 6 /* console is on UARTF of QUART2 */
-#else
-#define CONFIG_QUART_CONSOLE 8 /* console is on UARTH of QUART2 */
-#endif
-#else
-/* PRS200 configuration: */
-#undef CONFIG_QUART_CONSOLE
-#endif /* CONFIG_PRS200 */
-/*
- * To select console on PSC1, define CONFIG_PSC_CONSOLE as 1
- * and undefine CONFIG_QUART_CONSOLE.
- */
-#if !defined(CONFIG_PRS200)
-/* MCC200 configuration: */
-#define CONFIG_PSC_CONSOLE 1 /* PSC1 may be COM */
-#define CONFIG_PSC_CONSOLE2 2 /* PSC2 is PSoC */
-#else
-/* PRS200 configuration: */
-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#endif
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_MII 1
-
-#define CONFIG_DOS_PARTITION
-
-/* USB */
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
-/* automatic software updates (see board/mcc200/auto_update.c) */
-#define CONFIG_AUTO_UPDATE 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_USB
-
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#ifdef CONFIG_PRS200
-# define CONFIG_SYS__BOARDNAME "prs200"
-# define CONFIG_SYS__LINUX_CONSOLE "ttyS0"
-#else
-# define CONFIG_SYS__BOARDNAME "mcc200"
-# define CONFIG_SYS__LINUX_CONSOLE "ttyEU5"
-#endif
-
-/* Network */
-#define CONFIG_ETHADDR 00:17:17:ff:00:00
-#define CONFIG_IPADDR 10.76.9.29
-#define CONFIG_SERVERIP 10.76.9.1
-
-#include <version.h> /* For U-Boot version */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "ubootver=" U_BOOT_VERSION "\0" \
- "netdev=eth0\0" \
- "hostname=" CONFIG_SYS__BOARDNAME "\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/mtdblock2 " \
- "rootfstype=cramfs\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addcons=setenv bootargs ${bootargs} " \
- "console=${console},${baudrate} " \
- "ubootver=${ubootver} board=${board}\0" \
- "flash_nfs=run nfsargs addip addcons;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addcons;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};" \
- "run nfsargs addip addcons;bootm\0" \
- "console=" CONFIG_SYS__LINUX_CONSOLE "\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "bootfile=/tftpboot/" CONFIG_SYS__BOARDNAME "/uImage\0" \
- "load=tftp 200000 /tftpboot/" CONFIG_SYS__BOARDNAME "/u-boot.bin\0" \
- "text_base=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
- "kernel_addr=0xFC0C0000\0" \
- "update=protect off ${text_base} +${filesize};" \
- "era ${text_base} +${filesize};" \
- "cp.b 200000 ${text_base} ${filesize}\0" \
- "unlock=yes\0" \
- ""
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
-
-/*
- * IPB Bus clocking configuration.
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
-
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at 0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!)
- * 0xFE000000 for 32 MB
- * 0xFF000000 for 16 MB
- * 0xFF800000 for 8 MB
- */
-#define CONFIG_SYS_FLASH_BASE 0xfc000000
-#define CONFIG_SYS_FLASH_SIZE 0x04000000
-
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
-
-#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-
-#if CONFIG_SYS_TEXT_BASE == CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_LOWBOOT 1
-#endif
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR 0xf0000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */
-
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*
- * Ethernet configuration
- */
-/* #define CONFIG_MPC5xxx_FEC 1 */
-/* #define CONFIG_MPC5xxx_FEC_MII100 */
-/*
- * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
- */
-/* #define CONFIG_MPC5xxx_FEC_MII10 */
-#define CONFIG_PHY_ADDR 1
-
-/*
- * LCD Splash Screen
- */
-#if !defined(CONFIG_PRS200)
-#define CONFIG_LCD 1
-#define CONFIG_PROGRESSBAR 1
-#endif
-
-#if defined(CONFIG_LCD)
-#define CONFIG_SPLASH_SCREEN 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-#define LCD_BPP LCD_MONOCHROME
-#endif
-
-/*
- * GPIO configuration
- */
-/* 0x10000004 = 32MB SDRAM */
-/* 0x90000004 = 64MB SDRAM */
-#if defined(CONFIG_LCD)
-/* set PSC2 in UART mode */
-#define CONFIG_SYS_GPS_PORT_CONFIG 0x00000044
-#else
-#define CONFIG_SYS_GPS_PORT_CONFIG 0x00000004
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL HID0_ICE
-
-#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_BOOTCS_CFG 0x0004fb00
-#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
-
-/* Quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */
-#define CONFIG_SYS_CS2_START 0x80000000
-#define CONFIG_SYS_CS2_SIZE 0x00001000
-#define CONFIG_SYS_CS2_CFG 0x1d300
-
-/* Second Quad UART @0x80010000 */
-#define CONFIG_SYS_CS1_START 0x80010000
-#define CONFIG_SYS_CS1_SIZE 0x00001000
-#define CONFIG_SYS_CS1_CFG 0x1d300
-
-/* Leica - build revision resistors */
-/*
-#define CONFIG_SYS_CS3_START 0x80020000
-#define CONFIG_SYS_CS3_SIZE 0x00000004
-#define CONFIG_SYS_CS3_CFG 0x1d300
-*/
-
-/*
- * Select one of quarts as a default
- * console. If undefined - PSC console
- * wil be default
- */
-#define CONFIG_SYS_CS_BURST 0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE 0x33333333
-
-#define CONFIG_SYS_RESET_ADDRESS 0xff000000
-
-/*
- * QUART Expanders support
- */
-#if defined(CONFIG_QUART_CONSOLE)
-/*
- * We'll use NS16550 chip routines,
- */
-#define CONFIG_SYS_NS16550 1
-#define CONFIG_SYS_NS16550_SERIAL 1
-#define CONFIG_CONS_INDEX 1
-/*
- * To achieve necessary offset on SC16C554
- * A0-A2 (register select) pins with NS16550
- * functions (in struct NS16550), REG_SIZE
- * should be 4, because A0-A2 pins are connected
- * to DA2-DA4 address bus lines.
- */
-#define CONFIG_SYS_NS16550_REG_SIZE 4
-/*
- * LocalPlus Bus already inited in cpu_init_f(),
- * so can work with QUART's chip selects.
- * One of four SC16C554 UARTs is selected with
- * A3-A4 (DA5-DA6) lines.
- */
-#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200)
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
-#elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
-#else
-#error "Wrong QUART expander number."
-#endif
-
-/*
- * SC16C554 chip's external crystal oscillator frequency
- * is 7.3728 MHz
- */
-#define CONFIG_SYS_NS16550_CLK 7372800
-#endif /* CONFIG_QUART_CONSOLE */
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK 0x0001BBBB
-#define CONFIG_USB_CONFIG 0x00005000
-
-#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
-#define CONFIG_AUTOBOOT_STOP_STR "432"
-#define CONFIG_SILENT_CONSOLE 1
-
-#endif /* __CONFIG_H */
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
- "fdt_file=imx53-qsb.dtb\0" \
"fdt_addr=0x71000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
+/* NAND flash command */
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+
+/* NAND stuff */
+#define CONFIG_NAND_MXS
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+
#endif /* __MX6QSABREAUTO_CONFIG_H */
#define CONFIG_ENV_IS_IN_MMC
#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_ENV_OFFSET (8 * 64 * 1024)
#endif
#define CONFIG_OF_LIBFDT
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#include "imx6_spl.h"
+#endif
+
#define CONFIG_MACH_TYPE 3980
#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONSOLE_DEV "ttymxc0"
* High Level Configuration Options
*/
#define CONFIG_MPC5200
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* running at 33.000000MHz */
#define CONFIG_REVISION_TAG 1
-#define CONFIG_SUPPORT_RAW_INITRD
-
/* define to enable boot progress via leds */
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
#ifdef CONFIG_MX6Q
#define CONFIG_CMD_SATA
#endif
#define __SW_BOOT_NAND 0x44
#define __SW_BOOT_PCIE 0x74
#define CONFIG_SYS_L2_SIZE (256 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=ec000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \
+ "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
#endif
#if defined(CONFIG_P1021RDB)
#define __SW_BOOT_NAND 0xec
#define __SW_BOOT_PCIE 0x6c
#define CONFIG_SYS_L2_SIZE (256 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#ifdef CONFIG_PHYS_64BIT
+#define MTDIDS_DEFAULT "nor0=fef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
+ "256k(dtb),4608k(kernel),9728k(fs)," \
+ "256k(qe-ucode-firmware),1280k(u-boot)"
+#else
+#define MTDIDS_DEFAULT "nor0=ef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
+ "256k(dtb),4608k(kernel),9728k(fs)," \
+ "256k(qe-ucode-firmware),1280k(u-boot)"
+#endif
#endif
#if defined(CONFIG_P1024RDB)
#define __SW_BOOT_NAND 0xe8
#define __SW_BOOT_PCIE 0xa8
#define CONFIG_SYS_L2_SIZE (512 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#ifdef CONFIG_PHYS_64BIT
+#define MTDIDS_DEFAULT "nor0=fef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
+ "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
+#else
+#define MTDIDS_DEFAULT "nor0=ef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
+ "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
+#endif
#endif
#ifdef CONFIG_SDCARD
#endif /* CONFIG_UEC_ETH5 */
#endif /* CONFIG_TWR-P1025 */
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=ec000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:256k(vsc7385-firmware)," \
+ "256k(dtb),5632k(kernel),57856k(fs)," \
+ "256k(qe-ucode-firmware),1280k(u-boot)"
+
/*
* Environment
*/
#define CONFIG_DDR_NUM_CH0 1
#define CONFIG_DDR_NUM_CH1 1
-#define CONFIG_DDR_FREQ 1600
-
/*
* Memory Size & Mapping
*/
#define CONFIG_DDR_NUM_CH0 2
#define CONFIG_DDR_NUM_CH1 2
-#define CONFIG_DDR_FREQ 1600
-
#define CONFIG_UNIPHIER_SMP
/*
#define CONFIG_DDR_NUM_CH0 1
#define CONFIG_DDR_NUM_CH1 1
-#define CONFIG_DDR_FREQ 1333
-
/* #define CONFIG_DDR_STANDARD */
/*
#define CONFIG_SYS_MAX_I2C_BUS 7
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
#define CONFIG_USB_GADGET_DUALSPEED
/*
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_SYS_GENERIC_BOARD
+
/*
* Top level Makefile configuration choices
*/
#undef CONFIG_BOARD_COMMON
#undef CONFIG_USB_GADGET
#undef CONFIG_USB_GADGET_S3C_UDC_OTG
+#undef CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
#undef CONFIG_CMD_USB_MASS_STORAGE
#undef CONFIG_REVISION_TAG
#undef CONFIG_CMD_THOR_DOWNLOAD
*/
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x0
-#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS
+/*
+ * EPCS/EPCQx1 Serial Flash Controller
+ */
+#ifdef CONFIG_ALTERA_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_BAR
+/*
+ * The base address is configurable in QSys, each board must specify the
+ * base address based on it's particular FPGA configuration. Please note
+ * that the address here is incremented by 0x400 from the Base address
+ * selected in QSys, since the SPI registers are at offset +0x400.
+ * #define CONFIG_SYS_SPI_BASE 0xff240400
+ */
+#endif
+
/*
* Ethernet on SoC (EMAC)
*/
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
#endif
+ /*
+ * I2C support
+ */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DW
+#define CONFIG_SYS_I2C_BUS_MAX 4
+#define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS
+#define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS
+#define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS
+#define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS
+/* Using standard mode which the speed up to 100Kb/s */
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SPEED1 100000
+#define CONFIG_SYS_I2C_SPEED2 100000
+#define CONFIG_SYS_I2C_SPEED3 100000
+/* Address of device when used as slave */
+#define CONFIG_SYS_I2C_SLAVE 0x02
+#define CONFIG_SYS_I2C_SLAVE1 0x02
+#define CONFIG_SYS_I2C_SLAVE2 0x02
+#define CONFIG_SYS_I2C_SLAVE3 0x02
+#ifndef __ASSEMBLY__
+/* Clock supplied to I2C controller in unit of MHz */
+unsigned int cm_get_l4_sp_clk_hz(void);
+#define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000)
+#endif
+#define CONFIG_CMD_I2C
+
/*
* Serial Driver
*/
*/
#endif
+/*
+ * USB Gadget (DFU, UMS)
+ */
+#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+
+/* USB Composite download gadget - g_dnl */
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_MASS_STORAGE
+
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024)
+#define DFU_DEFAULT_POLL_TIMEOUT 300
+
+/* USB IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x0525 /* NetChip */
+#define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /* Linux-USB File-backed Storage Gadget */
+#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
+#define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM
+#ifndef CONFIG_G_DNL_MANUFACTURER
+#define CONFIG_G_DNL_MANUFACTURER "Altera"
+#endif
+#endif
+
/*
* U-Boot environment
*/
/* Booting Linux */
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTFILE "zImage"
-#define CONFIG_BOOTARGS "console=ttyS0" __stringify(CONFIG_BAUDRATE)
+#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_BOOTCOMMAND "run ramboot"
#else
#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI
-
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#ifndef CONFIG_SUNXI_USB_VBUS0_GPIO
-#define CONFIG_SUNXI_USB_VBUS0_GPIO SUNXI_GPH(6)
-#endif
-#ifndef CONFIG_SUNXI_USB_VBUS1_GPIO
-#define CONFIG_SUNXI_USB_VBUS1_GPIO SUNXI_GPH(3)
-#endif
#endif
/*
/*
* A31 specific configuration
*/
+#define CONFIG_CLK_FULL_SPEED 1008000000
#define CONFIG_SYS_PROMPT "sun6i# "
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_SUNXI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
/*
* Include common sunxi configuration where most the settings are
*/
#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI
-
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#ifndef CONFIG_SUNXI_USB_VBUS0_GPIO
-#define CONFIG_SUNXI_USB_VBUS0_GPIO SUNXI_GPH(6)
-#endif
-#ifndef CONFIG_SUNXI_USB_VBUS1_GPIO
-#define CONFIG_SUNXI_USB_VBUS1_GPIO SUNXI_GPH(3)
-#endif
#endif
#define CONFIG_ARMV7_VIRT 1
--- /dev/null
+/*
+ * Copyright (C) 2014 Soeren Moch <smoch@web.de>
+ *
+ * Configuration settings for the TBS2910 MatrixARM board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __TBS2910_CONFIG_H
+#define __TBS2910_CONFIG_H
+
+#include "mx6_common.h"
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+/* General configuration */
+#define CONFIG_MX6
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+#define CONFIG_SYS_THUMB_BUILD
+
+#define CONFIG_MACH_TYPE 3980
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MXC_GPIO
+#define CONFIG_CMD_GPIO
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "Matrix U-Boot> "
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HZ 1000
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024)
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END \
+ (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
+
+#define CONFIG_SYS_TEXT_BASE 0x80000000
+#define CONFIG_SYS_BOOTMAPSZ 0x6C000000
+#define CONFIG_SYS_LOAD_ADDR 0x10800000
+
+/* Serial console */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_CONS_INDEX 1
+
+/* *** Command definition *** */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_CMD_TIME
+
+/* Filesystems / image support */
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_FS_GENERIC
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
+#define CONFIG_FIT
+
+/* MMC */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_USDHC_NUM 3
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+
+/* Ethernet */
+#define CONFIG_FEC_MXC
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 4
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+/* Framebuffer */
+#define CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_CFB_CONSOLE_ANSI
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_CMD_HDMIDETECT
+#endif
+
+/* PCI */
+#define CONFIG_CMD_PCI
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCIE_IMX
+#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
+#endif
+
+/* SATA */
+#define CONFIG_CMD_SATA
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_DWC_AHSATA_PORT_ID 0
+#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
+/* USB */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_KEYBOARD
+#ifdef CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_SYS_STDIO_DEREGISTER
+#define CONFIG_PREBOOT "if hdmidet; then usb start; fi"
+#endif /* CONFIG_USB_KEYBOARD */
+#endif /* CONFIG_CMD_USB */
+
+/* RTC */
+#define CONFIG_CMD_DATE
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_RTC_DS1307
+#define CONFIG_SYS_RTC_BUS_NUM 2
+#endif
+
+/* I2C */
+#define CONFIG_CMD_I2C
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_I2C_EDID
+#endif
+
+/* Fuses */
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+/* Flash and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 2
+#define CONFIG_SYS_MMC_ENV_PART 1
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_OFFSET (384 * 1024)
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
+ "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
+ "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
+ "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
+ "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
+ "${bootargs_mmc3}\0" \
+ "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
+ "rdinit=/sbin/init enable_wait_mode=off\0" \
+ "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
+ "mmc read 0x10800000 0x800 0x4000; bootm\0" \
+ "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
+ "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
+ "run bootargs_upd; " \
+ "bootm 0x10800000 0x10d00000\0" \
+ "console=ttymxc0\0" \
+ "fan=gpio set 92\0" \
+ "stdin=serial,usbkbd\0" \
+ "stdout=serial,vga\0" \
+ "stderr=serial,vga\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc rescan; " \
+ "if run bootcmd_up1; then " \
+ "run bootcmd_up2; " \
+ "else " \
+ "run bootcmd_mmc; " \
+ "fi"
+
+#endif /* __TBS2910_CONFIG_H * */
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
/*
* Common filesystems support. When we have removable storage we
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SYS_MALLOC_F_LEN 0x7000
+#define CONFIG_SYS_MALLOC_F_LEN 0x2000
/*-----------------------------------------------------------------------
* MMU and Cache Setting
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+/* USB */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_DOS_PARTITION
+
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
#define CONFIG_SYS_TEXT_BASE 0x84000000
-#if defined(CONFIG_SPL_BUILD)
#define CONFIG_BOARD_POSTCLK_INIT
-#else
+
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
--- /dev/null
+/*
+ * (C) Copyright 2012 Xilinx
+ * (C) Copyright 2014 Digilent Inc.
+ *
+ * Configuration for Zynq Development Board - ZYBO
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZYBO_H
+#define __CONFIG_ZYNQ_ZYBO_H
+
+#define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+
+/* Define ZYBO PS Clock Frequency to 50MHz */
+#define CONFIG_ZYNQ_PS_CLK_FREQ 50000000UL
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZYBO_H */
--- /dev/null
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+
+/* MPUMODRST */
+#define CPU0_RESET 0
+#define CPU1_RESET 1
+#define WDS_RESET 2
+#define SCUPER_RESET 3
+#define L2_RESET 4
+
+/* PERMODRST */
+#define EMAC0_RESET 32
+#define EMAC1_RESET 33
+#define USB0_RESET 34
+#define USB1_RESET 35
+#define NAND_RESET 36
+#define QSPI_RESET 37
+#define L4WD0_RESET 38
+#define L4WD1_RESET 39
+#define OSC1TIMER0_RESET 40
+#define OSC1TIMER1_RESET 41
+#define SPTIMER0_RESET 42
+#define SPTIMER1_RESET 43
+#define I2C0_RESET 44
+#define I2C1_RESET 45
+#define I2C2_RESET 46
+#define I2C3_RESET 47
+#define UART0_RESET 48
+#define UART1_RESET 49
+#define SPIM0_RESET 50
+#define SPIM1_RESET 51
+#define SPIS0_RESET 52
+#define SPIS1_RESET 53
+#define SDMMC_RESET 54
+#define CAN0_RESET 55
+#define CAN1_RESET 56
+#define GPIO0_RESET 57
+#define GPIO1_RESET 58
+#define GPIO2_RESET 59
+#define DMA_RESET 60
+#define SDR_RESET 61
+
+/* PER2MODRST */
+#define DMAIF0_RESET 64
+#define DMAIF1_RESET 65
+#define DMAIF2_RESET 66
+#define DMAIF3_RESET 67
+#define DMAIF4_RESET 68
+#define DMAIF5_RESET 69
+#define DMAIF6_RESET 70
+#define DMAIF7_RESET 71
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET 96
+#define LWHPS2FPGA_RESET 97
+#define FPGA2HPS_RESET 98
+
+/* MISCMODRST*/
+#define ROM_RESET 128
+#define OCRAM_RESET 129
+#define SYSMGR_RESET 130
+#define SYSMGRCOLD_RESET 131
+#define FPGAMGR_RESET 132
+#define ACPIDMAP_RESET 133
+#define S2F_RESET 134
+#define S2FCOLD_RESET 135
+#define NRSTPIN_RESET 136
+#define TIMESTAMPCOLD_RESET 137
+#define CLKMGRCOLD_RESET 138
+#define SCANMGR_RESET 139
+#define FRZCTRLCOLD_RESET 140
+#define SYSDBG_RESET 141
+#define DBG_RESET 142
+#define TAPCOLD_RESET 143
+#define SDRCOLD_RESET 144
+
+#endif
void *priv; /* Pointer to driver-specific data */
} vidinfo_t;
-#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_MCC200, CONFIG_ATMEL_LCD */
+#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */
extern vidinfo_t panel_info;
--- /dev/null
+/*
+ * include/linux/serial_reg.h
+ *
+ * Copyright (C) 1992, 1994 by Theodore Ts'o.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * These are the UART port assignments, expressed as offsets from the base
+ * register. These assignments should hold for any serial port based on
+ * a 8250, 16450, or 16550(A).
+ */
+
+#ifndef _LINUX_SERIAL_REG_H
+#define _LINUX_SERIAL_REG_H
+
+/*
+ * DLAB=0
+ */
+#define UART_RX 0 /* In: Receive buffer */
+#define UART_TX 0 /* Out: Transmit buffer */
+
+#define UART_IER 1 /* Out: Interrupt Enable Register */
+#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
+#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
+#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
+/*
+ * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1
+ */
+#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */
+
+#define UART_IIR 2 /* In: Interrupt ID Register */
+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
+#define UART_IIR_ID 0x0e /* Mask for the interrupt ID */
+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+
+#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */
+
+#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */
+#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */
+#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */
+
+#define UART_FCR 2 /* Out: FIFO Control Register */
+#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
+#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
+/*
+ * Note: The FIFO trigger levels are chip specific:
+ * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11
+ * PC16550D: 1 4 8 14 xx xx xx xx
+ * TI16C550A: 1 4 8 14 xx xx xx xx
+ * TI16C550C: 1 4 8 14 xx xx xx xx
+ * ST16C550: 1 4 8 14 xx xx xx xx
+ * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2
+ * NS16C552: 1 4 8 14 xx xx xx xx
+ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654
+ * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750
+ * TI16C752: 8 16 56 60 8 16 32 56
+ * Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA
+ */
+#define UART_FCR_R_TRIG_00 0x00
+#define UART_FCR_R_TRIG_01 0x40
+#define UART_FCR_R_TRIG_10 0x80
+#define UART_FCR_R_TRIG_11 0xc0
+#define UART_FCR_T_TRIG_00 0x00
+#define UART_FCR_T_TRIG_01 0x10
+#define UART_FCR_T_TRIG_10 0x20
+#define UART_FCR_T_TRIG_11 0x30
+
+#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
+#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
+#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
+#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
+#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
+/* 16650 definitions */
+#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
+#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
+#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
+#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
+#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
+#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
+#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
+#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
+#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */
+
+#define UART_LCR 3 /* Out: Line Control Register */
+/*
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
+#define UART_LCR_SBC 0x40 /* Set break control */
+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
+#define UART_LCR_EPAR 0x10 /* Even parity select */
+#define UART_LCR_PARITY 0x08 /* Parity Enable */
+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */
+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
+
+/*
+ * Access to some registers depends on register access / configuration
+ * mode.
+ */
+#define UART_LCR_CONF_MODE_A UART_LCR_DLAB /* Configutation mode A */
+#define UART_LCR_CONF_MODE_B 0xBF /* Configutation mode B */
+
+#define UART_MCR 4 /* Out: Modem Control Register */
+#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
+#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
+#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
+#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+#define UART_MCR_OUT2 0x08 /* Out2 complement */
+#define UART_MCR_OUT1 0x04 /* Out1 complement */
+#define UART_MCR_RTS 0x02 /* RTS complement */
+#define UART_MCR_DTR 0x01 /* DTR complement */
+
+#define UART_LSR 5 /* In: Line Status Register */
+#define UART_LSR_FIFOE 0x80 /* Fifo error */
+#define UART_LSR_TEMT 0x40 /* Transmitter empty */
+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
+#define UART_LSR_BI 0x10 /* Break interrupt indicator */
+#define UART_LSR_FE 0x08 /* Frame error indicator */
+#define UART_LSR_PE 0x04 /* Parity error indicator */
+#define UART_LSR_OE 0x02 /* Overrun error indicator */
+#define UART_LSR_DR 0x01 /* Receiver data ready */
+#define UART_LSR_BRK_ERROR_BITS 0x1E /* BI, FE, PE, OE bits */
+
+#define UART_MSR 6 /* In: Modem Status Register */
+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
+#define UART_MSR_RI 0x40 /* Ring Indicator */
+#define UART_MSR_DSR 0x20 /* Data Set Ready */
+#define UART_MSR_CTS 0x10 /* Clear to Send */
+#define UART_MSR_DDCD 0x08 /* Delta DCD */
+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
+#define UART_MSR_DDSR 0x02 /* Delta DSR */
+#define UART_MSR_DCTS 0x01 /* Delta CTS */
+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
+
+#define UART_SCR 7 /* I/O: Scratch Register */
+
+/*
+ * DLAB=1
+ */
+#define UART_DLL 0 /* Out: Divisor Latch Low */
+#define UART_DLM 1 /* Out: Divisor Latch High */
+
+/*
+ * LCR=0xBF (or DLAB=1 for 16C660)
+ */
+#define UART_EFR 2 /* I/O: Extended Features Register */
+#define UART_XR_EFR 9 /* I/O: Extended Features Register (XR17D15x) */
+#define UART_EFR_CTS 0x80 /* CTS flow control */
+#define UART_EFR_RTS 0x40 /* RTS flow control */
+#define UART_EFR_SCD 0x20 /* Special character detect */
+#define UART_EFR_ECB 0x10 /* Enhanced control bit */
+/*
+ * the low four bits control software flow control
+ */
+
+/*
+ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
+ */
+#define UART_XON1 4 /* I/O: Xon character 1 */
+#define UART_XON2 5 /* I/O: Xon character 2 */
+#define UART_XOFF1 6 /* I/O: Xoff character 1 */
+#define UART_XOFF2 7 /* I/O: Xoff character 2 */
+
+/*
+ * EFR[4]=1 MCR[6]=1, TI16C752
+ */
+#define UART_TI752_TCR 6 /* I/O: transmission control register */
+#define UART_TI752_TLR 7 /* I/O: trigger level register */
+
+/*
+ * LCR=0xBF, XR16C85x
+ */
+#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
+ * In: Fifo count
+ * Out: Fifo custom trigger levels */
+/*
+ * These are the definitions for the Programmable Trigger Register
+ */
+#define UART_TRG_1 0x01
+#define UART_TRG_4 0x04
+#define UART_TRG_8 0x08
+#define UART_TRG_16 0x10
+#define UART_TRG_32 0x20
+#define UART_TRG_64 0x40
+#define UART_TRG_96 0x60
+#define UART_TRG_120 0x78
+#define UART_TRG_128 0x80
+
+#define UART_FCTR 1 /* Feature Control Register */
+#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */
+#define UART_FCTR_RTS_4DELAY 0x01
+#define UART_FCTR_RTS_6DELAY 0x02
+#define UART_FCTR_RTS_8DELAY 0x03
+#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */
+#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */
+#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */
+#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */
+#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */
+#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */
+#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */
+#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */
+#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */
+
+/*
+ * LCR=0xBF, FCTR[6]=1
+ */
+#define UART_EMSR 7 /* Extended Mode Select Register */
+#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */
+#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */
+
+/*
+ * The Intel XScale on-chip UARTs define these bits
+ */
+#define UART_IER_DMAE 0x80 /* DMA Requests Enable */
+#define UART_IER_UUE 0x40 /* UART Unit Enable */
+#define UART_IER_NRZE 0x20 /* NRZ coding Enable */
+#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */
+
+#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */
+
+#define UART_FCR_PXAR1 0x00 /* receive FIFO threshold = 1 */
+#define UART_FCR_PXAR8 0x40 /* receive FIFO threshold = 8 */
+#define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */
+#define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */
+
+/*
+ * Intel MID on-chip HSU (High Speed UART) defined bits
+ */
+#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */
+#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */
+#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */
+
+#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */
+#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */
+#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */
+
+#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */
+#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */
+
+#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */
+#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */
+
+/*
+ * These register definitions are for the 16C950
+ */
+#define UART_ASR 0x01 /* Additional Status Register */
+#define UART_RFL 0x03 /* Receiver FIFO level */
+#define UART_TFL 0x04 /* Transmitter FIFO level */
+#define UART_ICR 0x05 /* Index Control Register */
+
+/* The 16950 ICR registers */
+#define UART_ACR 0x00 /* Additional Control Register */
+#define UART_CPR 0x01 /* Clock Prescalar Register */
+#define UART_TCR 0x02 /* Times Clock Register */
+#define UART_CKS 0x03 /* Clock Select Register */
+#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */
+#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */
+#define UART_FCL 0x06 /* Flow Control Level Lower */
+#define UART_FCH 0x07 /* Flow Control Level Higher */
+#define UART_ID1 0x08 /* ID #1 */
+#define UART_ID2 0x09 /* ID #2 */
+#define UART_ID3 0x0A /* ID #3 */
+#define UART_REV 0x0B /* Revision */
+#define UART_CSR 0x0C /* Channel Software Reset */
+#define UART_NMR 0x0D /* Nine-bit Mode Register */
+#define UART_CTR 0xFF
+
+/*
+ * The 16C950 Additional Control Register
+ */
+#define UART_ACR_RXDIS 0x01 /* Receiver disable */
+#define UART_ACR_TXDIS 0x02 /* Transmitter disable */
+#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */
+#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */
+#define UART_ACR_ICRRD 0x40 /* ICR Read enable */
+#define UART_ACR_ASREN 0x80 /* Additional status enable */
+
+
+
+/*
+ * These definitions are for the RSA-DV II/S card, from
+ *
+ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
+ */
+
+#define UART_RSA_BASE (-8)
+
+#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
+
+#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
+#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
+#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
+#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
+
+#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
+
+#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
+#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
+#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
+
+#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
+
+#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
+#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
+#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
+#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
+#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
+
+#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
+
+#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
+
+#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
+
+#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
+
+/*
+ * The RSA DSV/II board has two fixed clock frequencies. One is the
+ * standard rate, and the other is 8 times faster.
+ */
+#define SERIAL_RSA_BAUD_BASE (921600)
+#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
+
+/*
+ * Extra serial register definitions for the internal UARTs
+ * in TI OMAP processors.
+ */
+#define UART_OMAP_MDR1 0x08 /* Mode definition register */
+#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */
+#define UART_OMAP_SCR 0x10 /* Supplementary control register */
+#define UART_OMAP_SSR 0x11 /* Supplementary status register */
+#define UART_OMAP_EBLR 0x12 /* BOF length register */
+#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */
+#define UART_OMAP_MVER 0x14 /* Module version register */
+#define UART_OMAP_SYSC 0x15 /* System configuration register */
+#define UART_OMAP_SYSS 0x16 /* System status register */
+#define UART_OMAP_WER 0x17 /* Wake-up enable register */
+
+/*
+ * These are the definitions for the MDR1 register
+ */
+#define UART_OMAP_MDR1_16X_MODE 0x00 /* UART 16x mode */
+#define UART_OMAP_MDR1_SIR_MODE 0x01 /* SIR mode */
+#define UART_OMAP_MDR1_16X_ABAUD_MODE 0x02 /* UART 16x auto-baud */
+#define UART_OMAP_MDR1_13X_MODE 0x03 /* UART 13x mode */
+#define UART_OMAP_MDR1_MIR_MODE 0x04 /* MIR mode */
+#define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */
+#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */
+#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */
+
+/*
+ * These are definitions for the Exar XR17V35X and XR17(C|D)15X
+ */
+#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */
+#define UART_EXAR_SLEEP 0x8b /* Sleep mode */
+#define UART_EXAR_DVID 0x8d /* Device identification */
+
+#define UART_EXAR_FCTR 0x08 /* Feature Control Register */
+#define UART_FCTR_EXAR_IRDA 0x08 /* IrDa data encode select */
+#define UART_FCTR_EXAR_485 0x10 /* Auto 485 half duplex dir ctl */
+#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */
+#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */
+#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */
+#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */
+
+#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */
+#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */
+
+#endif /* _LINUX_SERIAL_REG_H */
+
/* Voltage Selection in PM Receiver Module */
#define TWL4030_PM_RECEIVER_VAUX2_VSEL_18 0x05
+#define TWL4030_PM_RECEIVER_VAUX2_VSEL_28 0x09
+#define TWL4030_PM_RECEIVER_VAUX3_VSEL_18 0x01
#define TWL4030_PM_RECEIVER_VAUX3_VSEL_28 0x03
#define TWL4030_PM_RECEIVER_VPLL2_VSEL_18 0x05
#define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03
#include <usb_defs.h>
#include <linux/usb/ch9.h>
+#include <asm/cache.h>
+#include <part.h>
/*
* The EHCI spec says that we must align to at least 32 bytes. However,
unsigned int regs_otg;
unsigned int usb_phy_ctrl;
unsigned int usb_flags;
+ unsigned int usb_gusbcfg;
};
#endif
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
# Usage:
# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
+build := -f $(srctree)/scripts/Makefile.build obj
###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj=
# Usage:
# $(Q)$(MAKE) $(modbuiltin)=dir
-modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj
+modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj
# Prefix -I with $(srctree) if it is not an absolute path.
# skip if -I has no parameter
arg-check = $(if $(strip $(cmd_$@)),,1)
endif
-# >'< substitution is for echo to work,
-# >$< substitution to preserve $ when reloading .cmd file
-# note: when using inline perl scripts [perl -e '...$$t=1;...']
-# in $(cmd_xxx) double $$ your perl vars
-make-cmd = $(subst \\,\\\\,$(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1))))))
+# Replace >$< with >$$< to preserve $ when reloading the .cmd file
+# (needed for make)
+# Replace >#< with >\#< to avoid starting a comment in the .cmd file
+# (needed for make)
+# Replace >'< with >'\''< to be able to enclose the whole string in '...'
+# (needed for the shell)
+make-cmd = $(call escsq,$(subst \#,\\\#,$(subst $$,$$$$,$(cmd_$(1)))))
# Find any prerequisites that is newer than target or that does not exist.
# PHONY targets skipped in both cases.
if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
@set -e; \
$(echo-cmd) $(cmd_$(1)); \
- echo 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
+ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
# Execute the command and also postprocess generated .d dependencies file.
if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \
create_symlink:
ifneq ($(KBUILD_SRC),)
$(Q)mkdir -p include/asm
+ $(Q)ln -fsn $(KBUILD_SRC)/arch/$(ARCH)/include/asm/arch-$(if $(SOC),$(SOC),$(CPU)) \
+ include/asm/arch
+else
+ $(Q)ln -fsn arch-$(if $(SOC),$(SOC),$(CPU)) \
+ arch/$(ARCH)/include/asm/arch
endif
- $(Q)ln -fsn $(srctree)/arch/$(ARCH)/include/asm/arch-$(if $(SOC),$(SOC),$(CPU)) \
- $(if $(KBUILD_SRC),,arch/$(ARCH)/)include/asm/arch
PHONY += FORCE
FORCE:
# ===========================================================================
-ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
+ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
lib-target := $(obj)/lib.a
endif
-ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),)
+ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
builtin-target := $(obj)/built-in.o
endif
quiet_cmd_link_multi-m = LD [M] $@
cmd_link_multi-m = $(cmd_link_multi-y)
-# We would rather have a list of rules like
-# foo.o: $(foo-objs)
-# but that's not so easy, so we rather make all composite objects depend
-# on the set of all their parts
-$(multi-used-y) : %.o: $(multi-objs-y) FORCE
+$(multi-used-y): FORCE
$(call if_changed,link_multi-y)
+$(call multi_depend, $(multi-used-y), .o, -objs -y)
-$(multi-used-m) : %.o: $(multi-objs-m) FORCE
+$(multi-used-m): FORCE
$(call if_changed,link_multi-m)
@{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
+$(call multi_depend, $(multi-used-m), .o, -objs -y)
targets += $(multi-used-y) $(multi-used-m)
# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+clean := -f $(srctree)/scripts/Makefile.clean obj
# The filename Kbuild has precedence over Makefile
kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
subdir-y += $(__subdir-y)
__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
subdir-m += $(__subdir-m)
-__subdir-n := $(patsubst %/,%,$(filter %/, $(obj-n)))
-subdir-n += $(__subdir-n)
__subdir- := $(patsubst %/,%,$(filter %/, $(obj-)))
subdir- += $(__subdir-)
# Subdirectories we need to descend into
subdir-ym := $(sort $(subdir-y) $(subdir-m))
-subdir-ymn := $(sort $(subdir-ym) $(subdir-n) $(subdir-))
+subdir-ymn := $(sort $(subdir-ym) $(subdir-))
# Add subdir path
# Will compile qconf as a C++ program, and menu as a C program.
# They are linked as C++ code to the executable qconf
-# hostprogs-y := conf
-# conf-objs := conf.o libkconfig.so
-# libkconfig-objs := expr.o type.o
-# Will create a shared library named libkconfig.so that consists of
-# expr.o and type.o (they are both compiled as C code and the object files
-# are made as position independent code).
-# conf.c is compiled as a C program, and conf.o is linked together with
-# libkconfig.so as the executable conf.
-# Note: Shared libraries consisting of C++ files are not supported
-
__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
# C code
# Executables compiled from a single .c file
-host-csingle := $(foreach m,$(__hostprogs),$(if $($(m)-objs),,$(m)))
+host-csingle := $(foreach m,$(__hostprogs), \
+ $(if $($(m)-objs)$($(m)-cxxobjs),,$(m)))
# C executables linked based on several .o files
host-cmulti := $(foreach m,$(__hostprogs),\
host-cobjs := $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
# C++ code
-# C++ executables compiled from at least on .cc file
+# C++ executables compiled from at least one .cc file
# and zero or more .c files
host-cxxmulti := $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m)))
# C++ Object (.o) files compiled from .cc files
host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
-# Shared libaries (only .c supported)
-# Shared libraries (.so) - all .so files referenced in "xxx-objs"
-host-cshlib := $(sort $(filter %.so, $(host-cobjs)))
-# Remove .so files from "xxx-objs"
-host-cobjs := $(filter-out %.so,$(host-cobjs))
-
-#Object (.o) files used by the shared libaries
-host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
-
# output directory for programs/.o files
-# hostprogs-y := tools/build may have been specified. Retrieve directory
-host-objdirs := $(foreach f,$(__hostprogs), $(if $(dir $(f)),$(dir $(f))))
-# directory of .o files from prog-objs notation
-host-objdirs += $(foreach f,$(host-cmulti), \
- $(foreach m,$($(f)-objs), \
- $(if $(dir $(m)),$(dir $(m)))))
-# directory of .o files from prog-cxxobjs notation
-host-objdirs += $(foreach f,$(host-cxxmulti), \
- $(foreach m,$($(f)-cxxobjs), \
- $(if $(dir $(m)),$(dir $(m)))))
+# hostprogs-y := tools/build may have been specified.
+# Retrieve also directory of .o files from prog-objs or prog-cxxobjs notation
+host-objdirs := $(dir $(__hostprogs) $(host-cobjs) $(host-cxxobjs))
host-objdirs := $(strip $(sort $(filter-out ./,$(host-objdirs))))
host-cobjs := $(addprefix $(obj)/,$(host-cobjs))
host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti))
host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs))
-host-cshlib := $(addprefix $(obj)/,$(host-cshlib))
-host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
host-objdirs := $(addprefix $(obj)/,$(host-objdirs))
obj-dirs += $(host-objdirs)
cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
$(addprefix $(obj)/,$($(@F)-objs)) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cmulti): $(obj)/%: $(host-cobjs) $(host-cshlib) FORCE
+$(host-cmulti): FORCE
$(call if_changed,host-cmulti)
+$(call multi_depend, $(host-cmulti), , -objs)
# Create .o file from a single .c file
# host-cobjs -> .o
$(foreach o,objs cxxobjs,\
$(addprefix $(obj)/,$($(@F)-$(o)))) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) $(host-cshlib) FORCE
+$(host-cxxmulti): FORCE
$(call if_changed,host-cxxmulti)
+$(call multi_depend, $(host-cxxmulti), , -objs -cxxobjs)
# Create .o file from a single .cc (C++) file
quiet_cmd_host-cxxobjs = HOSTCXX $@
$(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
$(call if_changed_dep,host-cxxobjs)
-# Compile .c file, create position independent .o file
-# host-cshobjs -> .o
-quiet_cmd_host-cshobjs = HOSTCC -fPIC $@
- cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
-$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE
- $(call if_changed_dep,host-cshobjs)
-
-# Link a shared library, based on position independent .o files
-# *.o -> .so shared library (host-cshlib)
-quiet_cmd_host-cshlib = HOSTLLD -shared $@
- cmd_host-cshlib = $(HOSTCC) $(HOSTLDFLAGS) -shared -o $@ \
- $(addprefix $(obj)/,$($(@F:.so=-objs))) \
- $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cshlib): $(obj)/%: $(host-cshobjs) FORCE
- $(call if_changed,host-cshlib)
-
targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
- $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
+ $(host-cxxmulti) $(host-cxxobjs)
modname-multi = $(sort $(foreach m,$(multi-used),\
$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
+# Useful for describing the dependency of composite objects
+# Usage:
+# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
+define multi_depend
+$(foreach m, $(notdir $1), \
+ $(eval $(obj)/$m: \
+ $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
+endef
+
ifdef REGENERATE_PARSERS
# GPERF
%_defconfig: $(obj)/conf
$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
+configfiles=$(wildcard $(srctree)/kernel/configs/$(1).config $(srctree)/arch/$(SRCARCH)/configs/$(1).config)
+
+define mergeconfig
+$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target))
+$(if $(call configfiles,$(1)),, $(error No configuration exists for this target on this architecture))
+$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(call configfiles,$(1))
+$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
+endef
+
+PHONY += kvmconfig
+kvmconfig:
+ $(call mergeconfig,kvm_guest)
+
+PHONY += tinyconfig
+tinyconfig: allnoconfig
+ $(call mergeconfig,tiny)
+
# Help text used by make help
help:
@echo ' config - Update current config utilising a line-oriented program'
@echo ' randconfig - New config with random answer to all options'
@echo ' listnewconfig - List new options'
@echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value'
+# @echo ' kvmconfig - Enable additional options for guest kernel support'
+# @echo ' tinyconfig - Configure the tiniest possible kernel'
# lxdialog stuff
check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
qconf-objs := zconf.tab.o
gconf-objs := gconf.o zconf.tab.o
-hostprogs-y := conf
-
-ifeq ($(MAKECMDGOALS),nconfig)
- hostprogs-y += nconf
-endif
-
-ifeq ($(MAKECMDGOALS),menuconfig)
- hostprogs-y += mconf
-endif
-
-ifeq ($(MAKECMDGOALS),update-po-config)
- hostprogs-y += kxgettext
-endif
-
-ifeq ($(MAKECMDGOALS),xconfig)
- qconf-target := 1
-endif
-ifeq ($(MAKECMDGOALS),gconfig)
- gconf-target := 1
-endif
-
-
-ifeq ($(qconf-target),1)
- hostprogs-y += qconf
-endif
-
-ifeq ($(gconf-target),1)
- hostprogs-y += gconf
-endif
+hostprogs-y := conf nconf mconf kxgettext qconf gconf
clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck
clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
-clean-files += mconf qconf gconf nconf
clean-files += config.pot linux.pot
# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
HOSTLOADLIBES_nconf = $(shell \
- pkg-config --libs menu panel ncurses 2>/dev/null \
+ pkg-config --libs menuw panelw ncursesw 2>/dev/null \
+ || pkg-config --libs menu panel ncurses 2>/dev/null \
|| echo "-lmenu -lpanel -lncurses" )
$(obj)/qconf.o: $(obj)/.tmp_qtcheck
-ifeq ($(qconf-target),1)
+ifeq ($(MAKECMDGOALS),xconfig)
$(obj)/.tmp_qtcheck: $(src)/Makefile
-include $(obj)/.tmp_qtcheck
$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
-ifeq ($(gconf-target),1)
+ifeq ($(MAKECMDGOALS),gconfig)
-include $(obj)/.tmp_gtkcheck
# GTK needs some extra effort, too...
/* item list manipulation for lxdialog use */
#define MAXITEMSTR 200
struct dialog_item {
- char str[MAXITEMSTR]; /* promtp displayed */
+ char str[MAXITEMSTR]; /* prompt displayed */
char tag;
void *data; /* pointer to menu item - used by menubox+checklist */
int selected; /* Set to 1 by dialog_*() function if selected. */
sub dump_function($$) {
my $prototype = shift;
my $file = shift;
+ my $noret = 0;
$prototype =~ s/^static +//;
$prototype =~ s/^extern +//;
$prototype =~ s/^noinline +//;
$prototype =~ s/__init +//;
$prototype =~ s/__init_or_module +//;
+ $prototype =~ s/__meminit +//;
$prototype =~ s/__must_check +//;
$prototype =~ s/__weak +//;
- $prototype =~ s/^#\s*define\s+//; #ak added
+ my $define = $prototype =~ s/^#\s*define\s+//; #ak added
$prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//;
# Yes, this truly is vile. We are looking for:
# - atomic_set (macro)
# - pci_match_device, __copy_to_user (long return type)
- if ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
+ if ($define && $prototype =~ m/^()([a-zA-Z0-9_~:]+)\s+/) {
+ # This is an object-like macro, it has no return type and no parameter
+ # list.
+ # Function-like macros are not allowed to have spaces between
+ # declaration_name and opening parenthesis (notice the \s+).
+ $return_type = $1;
+ $declaration_name = $2;
+ $noret = 1;
+ } elsif ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
$prototype =~ m/^(\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
$prototype =~ m/^(\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
$prototype =~ m/^(\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
# of warnings goes sufficiently down, the check is only performed in
# verbose mode.
# TODO: always perform the check.
- if ($verbose) {
+ if ($verbose && !$noret) {
check_return_section($file, $declaration_name, $return_type);
}
#endif
#endif
+ assert(run_command("", 0) == 0);
+ assert(run_command(" ", 0) == 0);
+
+ assert(run_command("'", 0) == 1);
+
printf("%s: Everything went swimmingly\n", __func__);
return 0;
}
#HOSTCFLAGS_mpc86x_clk.o := -pedantic
quiet_cmd_wrap = WRAP $@
-cmd_wrap = echo "\#include <$(srctree)/$(patsubst $(obj)/%,%,$@)>" >$@
+cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@
$(obj)/lib/%.c $(obj)/common/%.c:
$(call cmd,wrap)
#endif
static inline ulong getenvsize (void)
{
- ulong rc = CUR_ENVSIZE - sizeof(long);
+ ulong rc = CUR_ENVSIZE - sizeof(uint32_t);
if (HaveRedundEnv)
rc -= sizeof (char);
"\t\tkey1=value1\n"
"\t\tkey2=value2\n"
"\t\t...\n"
+ "\tEmpty lines are skipped, and lines with a # in the first\n"
+ "\tcolumn are treated as comments (also skipped).\n"
"\t-r : the environment has multiple copies in flash\n"
"\t-b : the target is big endian (default is little endian)\n"
"\t-p <byte> : fill the image with <byte> bytes instead of 0xff bytes\n"
/* Replace newlines separating variables with \0 */
for (fp = 0, ep = 0 ; fp < filesize ; fp++) {
if (filebuf[fp] == '\n') {
- if (ep == 0) {
+ if (fp == 0 || filebuf[fp-1] == '\n') {
/*
- * Newlines at the beginning of the file ?
- * Ignore them.
+ * Skip empty lines.
*/
continue;
} else if (filebuf[fp-1] == '\\') {
/* End of a variable */
envptr[ep++] = '\0';
}
+ } else if ((fp == 0 || filebuf[fp-1] == '\n') && filebuf[fp] == '#') {
+ /* Comment, skip the line. */
+ while (++fp < filesize && filebuf[fp] != '\n')
+ continue;
} else {
envptr[ep++] = filebuf[fp];
}