]> git.sur5r.net Git - u-boot/commitdiff
ARM: dts: at91: Add dts files for at91sam9x5ek
authorWenyou Yang <wenyou.yang@atmel.com>
Tue, 18 Apr 2017 05:49:34 +0000 (13:49 +0800)
committerSimon Glass <sjg@chromium.org>
Tue, 9 May 2017 18:14:15 +0000 (12:14 -0600)
The device tree source files of at91sam9x5ek board are copied from
the Linux v4.10, do the changes below.
 - Add the reg property for the pinctrl node.
 - Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's
   slibling nodes, instead of the child nodes.
 - Add the "u-boot,dm-pre-reloc" property to determine which nodes
   are used by the board_init_f stage.
 - Change the compatible of the spi flash to "spi-flash".
 - Add the spi0 aliases.
 - Fix the compilation warnings.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
21 files changed:
arch/arm/dts/Makefile
arch/arm/dts/at91sam9g15.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9g15ek.dts [new file with mode: 0644]
arch/arm/dts/at91sam9g25.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9g25ek.dts [new file with mode: 0644]
arch/arm/dts/at91sam9g35.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9g35ek.dts [new file with mode: 0644]
arch/arm/dts/at91sam9x25.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x25ek.dts [new file with mode: 0644]
arch/arm/dts/at91sam9x35.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x35ek.dts [new file with mode: 0644]
arch/arm/dts/at91sam9x5.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x5_can.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x5_isi.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x5_lcd.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x5_macb0.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x5_macb1.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x5_usart3.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x5cm.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x5dm.dtsi [new file with mode: 0644]
arch/arm/dts/at91sam9x5ek.dtsi [new file with mode: 0644]

index 4d656ce4cc3db87cbb57176a2ddb4d5955106607..092d2aac37ec1ec1bcf476da4c94122cc06a7a6a 100644 (file)
@@ -352,6 +352,13 @@ dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \
        keystone-k2e-evm.dtb \
        keystone-k2g-evm.dtb
 
+dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
+       at91sam9g15ek.dtb       \
+       at91sam9g25ek.dtb       \
+       at91sam9g35ek.dtb       \
+       at91sam9x25ek.dtb       \
+       at91sam9x35ek.dtb
+
 dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
        at91-sama5d2_xplained.dtb
 
diff --git a/arch/arm/dts/at91sam9g15.dtsi b/arch/arm/dts/at91sam9g15.dtsi
new file mode 100644 (file)
index 0000000..27de7dc
--- /dev/null
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9G15 SoC";
+       compatible = "atmel,at91sam9g15", "atmel,at91sam9x5";
+
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               atmel,mux-mask = <
+                                     /*    A         B          C     */
+                                      0xffffffff 0xffe0399f 0x00000000  /* pioA */
+                                      0x00040000 0x00047e3f 0x00000000  /* pioB */
+                                      0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+                                      0x003fffff 0x003f8000 0x00000000  /* pioD */
+                                     >;
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9g15ek.dts b/arch/arm/dts/at91sam9g15ek.dts
new file mode 100644 (file)
index 0000000..9fae925
--- /dev/null
@@ -0,0 +1,26 @@
+/*
+ * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g15.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9G15-EK";
+       compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+       ahb {
+               apb {
+                       hlcdc: hlcdc@f8038000 {
+                               u-boot,dm-pre-reloc;
+                               status = "okay";
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9g25.dtsi b/arch/arm/dts/at91sam9g25.dtsi
new file mode 100644 (file)
index 0000000..a7da0dd
--- /dev/null
@@ -0,0 +1,31 @@
+/*
+ * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_isi.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9G25 SoC";
+       compatible = "atmel,at91sam9g25", "atmel,at91sam9x5";
+
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               atmel,mux-mask = <
+                                     /*    A         B          C     */
+                                      0xffffffff 0xffe0399f 0xc000001c  /* pioA */
+                                      0x0007ffff 0x8000fe3f 0x00000000  /* pioB */
+                                      0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
+                                      0x003fffff 0x003f8000 0x00000000  /* pioD */
+                                     >;
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9g25ek.dts b/arch/arm/dts/at91sam9g25ek.dts
new file mode 100644 (file)
index 0000000..91a7177
--- /dev/null
@@ -0,0 +1,69 @@
+/*
+ * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9G25-EK";
+       compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+       ahb {
+               apb {
+                       spi0: spi@f0000000 {
+                               status = "disabled";
+                       };
+
+                       mmc1: mmc@f000c000 {
+                               status = "disabled";
+                       };
+
+                       i2c0: i2c@f8010000 {
+                               ov2640: camera@0x30 {
+                                       compatible = "ovti,ov2640";
+                                       reg = <0x30>;
+                                       pinctrl-names = "default";
+                                       pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+                                       resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+                                       pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+                                       clocks = <&pck0>;
+                                       clock-names = "xvclk";
+                                       assigned-clocks = <&pck0>;
+                                       assigned-clock-rates = <25000000>;
+                                       status = "okay";
+
+                                       port {
+                                               ov2640_0: endpoint {
+                                                       remote-endpoint = <&isi_0>;
+                                                       bus-width = <8>;
+                                               };
+                                       };
+                               };
+                       };
+
+                       macb0: ethernet@f802c000 {
+                               phy-mode = "rmii";
+                               status = "okay";
+                       };
+
+                       isi: isi@f8048000 {
+                               status = "okay";
+                               port {
+                                       isi_0: endpoint@0 {
+                                               reg = <0>;
+                                               remote-endpoint = <&ov2640_0>;
+                                               bus-width = <8>;
+                                               vsync-active = <1>;
+                                               hsync-active = <1>;
+                                       };
+                               };
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9g35.dtsi b/arch/arm/dts/at91sam9g35.dtsi
new file mode 100644 (file)
index 0000000..ff41158
--- /dev/null
@@ -0,0 +1,30 @@
+/*
+ * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9G35 SoC";
+       compatible = "atmel,at91sam9g35", "atmel,at91sam9x5";
+
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               atmel,mux-mask = <
+                                     /*    A         B          C     */
+                                      0xffffffff 0xffe0399f 0xc000000c  /* pioA */
+                                      0x000406ff 0x00047e3f 0x00000000  /* pioB */
+                                      0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+                                      0x003fffff 0x003f8000 0x00000000  /* pioD */
+                                     >;
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9g35ek.dts b/arch/arm/dts/at91sam9g35ek.dts
new file mode 100644 (file)
index 0000000..0cc084e
--- /dev/null
@@ -0,0 +1,31 @@
+/*
+ * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9G35-EK";
+       compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+       ahb {
+               apb {
+                       macb0: ethernet@f802c000 {
+                               phy-mode = "rmii";
+                               status = "okay";
+                       };
+
+                       hlcdc: hlcdc@f8038000 {
+                               u-boot,dm-pre-reloc;
+                               status = "okay";
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x25.dtsi b/arch/arm/dts/at91sam9x25.dtsi
new file mode 100644 (file)
index 0000000..3c5fa33
--- /dev/null
@@ -0,0 +1,32 @@
+/*
+ * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_macb1.dtsi"
+#include "at91sam9x5_can.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9X25 SoC";
+       compatible = "atmel,at91sam9x25", "atmel,at91sam9x5";
+
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               atmel,mux-mask = <
+                                     /*    A         B          C     */
+                                      0xffffffff 0xffe03fff 0xc000001c  /* pioA */
+                                      0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+                                      0x80000000 0xfffd0000 0xb83fffff  /* pioC */
+                                      0x003fffff 0x003f8000 0x00000000  /* pioD */
+                                     >;
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x25ek.dts b/arch/arm/dts/at91sam9x25ek.dts
new file mode 100644 (file)
index 0000000..4948648
--- /dev/null
@@ -0,0 +1,30 @@
+/*
+ * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9x25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9X25-EK";
+       compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+       ahb {
+               apb {
+                       macb0: ethernet@f802c000 {
+                               phy-mode = "rmii";
+                               status = "okay";
+                       };
+
+                       macb1: ethernet@f8030000 {
+                               phy-mode = "rmii";
+                               status = "okay";
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x35.dtsi b/arch/arm/dts/at91sam9x35.dtsi
new file mode 100644 (file)
index 0000000..d9054e8
--- /dev/null
@@ -0,0 +1,31 @@
+/*
+ * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_can.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9X35 SoC";
+       compatible = "atmel,at91sam9x35", "atmel,at91sam9x5";
+
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               atmel,mux-mask = <
+                                     /*    A         B          C     */
+                                      0xffffffff 0xffe03fff 0xc000000c  /* pioA */
+                                      0x000406ff 0x00047e3f 0x00000000  /* pioB */
+                                      0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+                                      0x003fffff 0x003f8000 0x00000000  /* pioD */
+                                     >;
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x35ek.dts b/arch/arm/dts/at91sam9x35ek.dts
new file mode 100644 (file)
index 0000000..3ca70c0
--- /dev/null
@@ -0,0 +1,30 @@
+/*
+ * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9x35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9X35-EK";
+       compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+       ahb {
+               apb {
+                       macb0: ethernet@f802c000 {
+                               phy-mode = "rmii";
+                               status = "okay";
+                       };
+                       hlcdc: hlcdc@f8038000 {
+                               u-boot,dm-pre-reloc;
+                               status = "okay";
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x5.dtsi b/arch/arm/dts/at91sam9x5.dtsi
new file mode 100644 (file)
index 0000000..a422c98
--- /dev/null
@@ -0,0 +1,1302 @@
+/*
+ * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
+ *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
+ *                   AT91SAM9X25, AT91SAM9X35 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+       model = "Atmel AT91SAM9x5 family SoC";
+       compatible = "atmel,at91sam9x5";
+       interrupt-parent = <&aic>;
+
+       aliases {
+               serial0 = &dbgu;
+               serial1 = &usart0;
+               serial2 = &usart1;
+               serial3 = &usart2;
+               gpio0 = &pioA;
+               gpio1 = &pioB;
+               gpio2 = &pioC;
+               gpio3 = &pioD;
+               tcb0 = &tcb0;
+               tcb1 = &tcb1;
+               i2c0 = &i2c0;
+               i2c1 = &i2c1;
+               i2c2 = &i2c2;
+               ssc0 = &ssc0;
+               pwm0 = &pwm0;
+               spi0 = &spi0;
+       };
+
+       cpus {
+               #address-cells = <0>;
+               #size-cells = <0>;
+
+               cpu {
+                       compatible = "arm,arm926ej-s";
+                       device_type = "cpu";
+               };
+       };
+
+       memory {
+               reg = <0x20000000 0x10000000>;
+       };
+
+       clocks {
+               slow_xtal: slow_xtal {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <0>;
+               };
+
+               main_xtal: main_xtal {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <0>;
+               };
+
+               adc_op_clk: adc_op_clk{
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <1000000>;
+               };
+       };
+
+       sram: sram@00300000 {
+               compatible = "mmio-sram";
+               reg = <0x00300000 0x8000>;
+       };
+
+       ahb {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               u-boot,dm-pre-reloc;
+
+               apb {
+                       compatible = "simple-bus";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+                       u-boot,dm-pre-reloc;
+
+                       aic: interrupt-controller@fffff000 {
+                               #interrupt-cells = <3>;
+                               compatible = "atmel,at91rm9200-aic";
+                               interrupt-controller;
+                               reg = <0xfffff000 0x200>;
+                               atmel,external-irqs = <31>;
+                       };
+
+                       ramc0: ramc@ffffe800 {
+                               compatible = "atmel,at91sam9g45-ddramc";
+                               reg = <0xffffe800 0x200>;
+                               clocks = <&ddrck>;
+                               clock-names = "ddrck";
+                       };
+
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91sam9x5-pmc", "syscon";
+                               reg = <0xfffffc00 0x200>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               interrupt-controller;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               #interrupt-cells = <1>;
+                               u-boot,dm-pre-reloc;
+
+                               main_rc_osc: main_rc_osc {
+                                       compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
+                                       clock-frequency = <12000000>;
+                                       clock-accuracy = <50000000>;
+                               };
+
+                               main_osc: main_osc {
+                                       compatible = "atmel,at91rm9200-clk-main-osc";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+                                       clocks = <&main_xtal>;
+                               };
+
+                               main: mainck {
+                                       compatible = "atmel,at91sam9x5-clk-main";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
+                                       clocks = <&main_rc_osc>, <&main_osc>;
+                               };
+
+                               plla: pllack@0 {
+                                       compatible = "atmel,at91rm9200-clk-pll";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+                                       clocks = <&main>;
+                                       reg = <0>;
+                                       atmel,clk-input-range = <2000000 32000000>;
+                                       #atmel,pll-clk-output-range-cells = <4>;
+                                       atmel,pll-clk-output-ranges = <745000000 800000000 0 0
+                                                                      695000000 750000000 1 0
+                                                                      645000000 700000000 2 0
+                                                                      595000000 650000000 3 0
+                                                                      545000000 600000000 0 1
+                                                                      495000000 555000000 1 1
+                                                                      445000000 500000000 2 1
+                                                                      400000000 450000000 3 1>;
+                               };
+
+                               plladiv: plladivck {
+                                       compatible = "atmel,at91sam9x5-clk-plldiv";
+                                       #clock-cells = <0>;
+                                       clocks = <&plla>;
+                               };
+
+                               utmi: utmick {
+                                       compatible = "atmel,at91sam9x5-clk-utmi";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc AT91_PMC_LOCKU>;
+                                       clocks = <&main>;
+                               };
+
+                               mck: masterck {
+                                       compatible = "atmel,at91sam9x5-clk-master";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+                                       clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+                                       atmel,clk-output-range = <0 133333333>;
+                                       atmel,clk-divisors = <1 2 4 3>;
+                                       atmel,master-clk-have-div3-pres;
+                                       u-boot,dm-pre-reloc;
+
+                               };
+
+                               usb: usbck {
+                                       compatible = "atmel,at91sam9x5-clk-usb";
+                                       #clock-cells = <0>;
+                                       clocks = <&plladiv>, <&utmi>;
+                               };
+
+                               prog: progck {
+                                       compatible = "atmel,at91sam9x5-clk-programmable";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       interrupt-parent = <&pmc>;
+                                       clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+                                       prog0: prog@0 {
+                                               #clock-cells = <0>;
+                                               reg = <0>;
+                                               interrupts = <AT91_PMC_PCKRDY(0)>;
+                                       };
+
+                                       prog1: prog@1 {
+                                               #clock-cells = <0>;
+                                               reg = <1>;
+                                               interrupts = <AT91_PMC_PCKRDY(1)>;
+                                       };
+                               };
+
+                               smd: smdclk {
+                                       compatible = "atmel,at91sam9x5-clk-smd";
+                                       #clock-cells = <0>;
+                                       clocks = <&plladiv>, <&utmi>;
+                               };
+
+                               systemck {
+                                       compatible = "atmel,at91rm9200-clk-system";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       ddrck: ddrck@2 {
+                                               #clock-cells = <0>;
+                                               reg = <2>;
+                                               clocks = <&mck>;
+                                       };
+
+                                       smdck: smdck@4 {
+                                               #clock-cells = <0>;
+                                               reg = <4>;
+                                               clocks = <&smd>;
+                                       };
+
+                                       uhpck: uhpck@6 {
+                                               #clock-cells = <0>;
+                                               reg = <6>;
+                                               clocks = <&usb>;
+                                       };
+
+                                       udpck: udpck@7 {
+                                               #clock-cells = <0>;
+                                               reg = <7>;
+                                               clocks = <&usb>;
+                                       };
+
+                                       pck0: pck0@8 {
+                                               #clock-cells = <0>;
+                                               reg = <8>;
+                                               clocks = <&prog0>;
+                                       };
+
+                                       pck1: pck1@9 {
+                                               #clock-cells = <0>;
+                                               reg = <9>;
+                                               clocks = <&prog1>;
+                                       };
+                               };
+
+                               periphck {
+                                       compatible = "atmel,at91sam9x5-clk-peripheral";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       clocks = <&mck>;
+                                       u-boot,dm-pre-reloc;
+
+
+                                       pioAB_clk: pioAB_clk@2 {
+                                               #clock-cells = <0>;
+                                               reg = <2>;
+                                       };
+
+                                       pioCD_clk: pioCD_clk@3 {
+                                               #clock-cells = <0>;
+                                               reg = <3>;
+                                       };
+
+                                       smd_clk: smd_clk@4 {
+                                               #clock-cells = <0>;
+                                               reg = <4>;
+                                       };
+
+                                       usart0_clk: usart0_clk@5 {
+                                               #clock-cells = <0>;
+                                               reg = <5>;
+                                       };
+
+                                       usart1_clk: usart1_clk@6 {
+                                               #clock-cells = <0>;
+                                               reg = <6>;
+                                       };
+
+                                       usart2_clk: usart2_clk@7 {
+                                               #clock-cells = <0>;
+                                               reg = <7>;
+                                       };
+
+                                       twi0_clk: twi0_clk@9 {
+                                               reg = <9>;
+                                               #clock-cells = <0>;
+                                       };
+
+                                       twi1_clk: twi1_clk@10 {
+                                               #clock-cells = <0>;
+                                               reg = <10>;
+                                       };
+
+                                       twi2_clk: twi2_clk@11 {
+                                               #clock-cells = <0>;
+                                               reg = <11>;
+                                       };
+
+                                       mci0_clk: mci0_clk@12 {
+                                               #clock-cells = <0>;
+                                               reg = <12>;
+                                       };
+
+                                       spi0_clk: spi0_clk@13 {
+                                               #clock-cells = <0>;
+                                               reg = <13>;
+                                       };
+
+                                       spi1_clk: spi1_clk@14 {
+                                               #clock-cells = <0>;
+                                               reg = <14>;
+                                       };
+
+                                       uart0_clk: uart0_clk@15 {
+                                               #clock-cells = <0>;
+                                               reg = <15>;
+                                       };
+
+                                       uart1_clk: uart1_clk@16 {
+                                               #clock-cells = <0>;
+                                               reg = <16>;
+                                       };
+
+                                       tcb0_clk: tcb0_clk@17 {
+                                               #clock-cells = <0>;
+                                               reg = <17>;
+                                       };
+
+                                       pwm_clk: pwm_clk@18 {
+                                               #clock-cells = <0>;
+                                               reg = <18>;
+                                       };
+
+                                       adc_clk: adc_clk@19 {
+                                               #clock-cells = <0>;
+                                               reg = <19>;
+                                       };
+
+                                       dma0_clk: dma0_clk@20 {
+                                               #clock-cells = <0>;
+                                               reg = <20>;
+                                       };
+
+                                       dma1_clk: dma1_clk@21 {
+                                               #clock-cells = <0>;
+                                               reg = <21>;
+                                       };
+
+                                       uhphs_clk: uhphs_clk@22 {
+                                               #clock-cells = <0>;
+                                               reg = <22>;
+                                       };
+
+                                       udphs_clk: udphs_clk@23 {
+                                               #clock-cells = <0>;
+                                               reg = <23>;
+                                       };
+
+                                       mci1_clk: mci1_clk@26 {
+                                               #clock-cells = <0>;
+                                               reg = <26>;
+                                       };
+
+                                       ssc0_clk: ssc0_clk@28 {
+                                               #clock-cells = <0>;
+                                               reg = <28>;
+                                       };
+                               };
+                       };
+
+                       rstc@fffffe00 {
+                               compatible = "atmel,at91sam9g45-rstc";
+                               reg = <0xfffffe00 0x10>;
+                               clocks = <&clk32k>;
+                       };
+
+                       shdwc@fffffe10 {
+                               compatible = "atmel,at91sam9x5-shdwc";
+                               reg = <0xfffffe10 0x10>;
+                               clocks = <&clk32k>;
+                       };
+
+                       pit: timer@fffffe30 {
+                               compatible = "atmel,at91sam9260-pit";
+                               reg = <0xfffffe30 0xf>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&mck>;
+                       };
+
+                       sckc@fffffe50 {
+                               compatible = "atmel,at91sam9x5-sckc";
+                               reg = <0xfffffe50 0x4>;
+
+                               slow_osc: slow_osc {
+                                       compatible = "atmel,at91sam9x5-clk-slow-osc";
+                                       #clock-cells = <0>;
+                                       clocks = <&slow_xtal>;
+                               };
+
+                               slow_rc_osc: slow_rc_osc {
+                                       compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+                                       #clock-cells = <0>;
+                                       clock-frequency = <32768>;
+                                       clock-accuracy = <50000000>;
+                               };
+
+                               clk32k: slck {
+                                       compatible = "atmel,at91sam9x5-clk-slow";
+                                       #clock-cells = <0>;
+                                       clocks = <&slow_rc_osc>, <&slow_osc>;
+                               };
+                       };
+
+                       tcb0: timer@f8008000 {
+                               compatible = "atmel,at91sam9x5-tcb";
+                               reg = <0xf8008000 0x100>;
+                               interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&tcb0_clk>, <&clk32k>;
+                               clock-names = "t0_clk", "slow_clk";
+                       };
+
+                       tcb1: timer@f800c000 {
+                               compatible = "atmel,at91sam9x5-tcb";
+                               reg = <0xf800c000 0x100>;
+                               interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&tcb0_clk>, <&clk32k>;
+                               clock-names = "t0_clk", "slow_clk";
+                       };
+
+                       dma0: dma-controller@ffffec00 {
+                               compatible = "atmel,at91sam9g45-dma";
+                               reg = <0xffffec00 0x200>;
+                               interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+                               #dma-cells = <2>;
+                               clocks = <&dma0_clk>;
+                               clock-names = "dma_clk";
+                       };
+
+                       dma1: dma-controller@ffffee00 {
+                               compatible = "atmel,at91sam9g45-dma";
+                               reg = <0xffffee00 0x200>;
+                               interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+                               #dma-cells = <2>;
+                               clocks = <&dma1_clk>;
+                               clock-names = "dma_clk";
+                       };
+
+                       pinctrl@fffff400 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+                               ranges = <0xfffff400 0xfffff400 0x800>;
+                               reg = <0xfffff400 0x200         /* pioA */
+                                      0xfffff600 0x200         /* pioB */
+                                      0xfffff800 0x200         /* pioC */
+                                      0xfffffa00 0x200         /* pioD */
+                                      >;
+                               u-boot,dm-pre-reloc;
+
+
+                               /* shared pinctrl settings */
+                               dbgu {
+                                       u-boot,dm-pre-reloc;
+                                       pinctrl_dbgu: dbgu-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+                                                        AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+                               };
+
+                               usart0 {
+                                       pinctrl_usart0: usart0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */
+                                                        AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA1 periph A */
+                                       };
+
+                                       pinctrl_usart0_rts: usart0_rts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA2 periph A */
+                                       };
+
+                                       pinctrl_usart0_cts: usart0_cts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA3 periph A */
+                                       };
+
+                                       pinctrl_usart0_sck: usart0_sck-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA4 periph A */
+                                       };
+                               };
+
+                               usart1 {
+                                       pinctrl_usart1: usart1-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */
+                                                        AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA6 periph A */
+                                       };
+
+                                       pinctrl_usart1_rts: usart1_rts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */
+                                       };
+
+                                       pinctrl_usart1_cts: usart1_cts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */
+                                       };
+
+                                       pinctrl_usart1_sck: usart1_sck-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */
+                                       };
+                               };
+
+                               usart2 {
+                                       pinctrl_usart2: usart2-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
+                                                        AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA8 periph A */
+                                       };
+
+                                       pinctrl_usart2_rts: usart2_rts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB0 periph B */
+                                       };
+
+                                       pinctrl_usart2_cts: usart2_cts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB1 periph B */
+                                       };
+
+                                       pinctrl_usart2_sck: usart2_sck-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB2 periph B */
+                                       };
+                               };
+
+                               uart0 {
+                                       pinctrl_uart0: uart0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC8 periph C */
+                                                        AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;       /* PC9 periph C with pullup */
+                                       };
+                               };
+
+                               uart1 {
+                                       pinctrl_uart1: uart1-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC16 periph C */
+                                                        AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;      /* PC17 periph C with pullup */
+                                       };
+                               };
+
+                               nand {
+                                       pinctrl_nand: nand-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD0 periph A Read Enable */
+                                                        AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD1 periph A Write Enable */
+                                                        AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD2 periph A Address Latch Enable */
+                                                        AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD3 periph A Command Latch Enable */
+                                                        AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP      /* PD4 gpio Chip Enable pin pull_up */
+                                                        AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP      /* PD5 gpio RDY/BUSY pin pull_up */
+                                                        AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD6 periph A Data bit 0 */
+                                                        AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD7 periph A Data bit 1 */
+                                                        AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD8 periph A Data bit 2 */
+                                                        AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD9 periph A Data bit 3 */
+                                                        AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD10 periph A Data bit 4 */
+                                                        AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD11 periph A Data bit 5 */
+                                                        AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD12 periph A Data bit 6 */
+                                                        AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */
+                                       };
+
+                                       pinctrl_nand_16bits: nand_16bits-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD14 periph A Data bit 8 */
+                                                        AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD15 periph A Data bit 9 */
+                                                        AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD16 periph A Data bit 10 */
+                                                        AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD17 periph A Data bit 11 */
+                                                        AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD18 periph A Data bit 12 */
+                                                        AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD19 periph A Data bit 13 */
+                                                        AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD20 periph A Data bit 14 */
+                                                        AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */
+                                       };
+                               };
+
+                               mmc0 {
+                                       pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA17 periph A */
+                                                        AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA16 periph A with pullup */
+                                                        AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA15 periph A with pullup */
+                                       };
+
+                                       pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA18 periph A with pullup */
+                                                        AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA19 periph A with pullup */
+                                                        AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA20 periph A with pullup */
+                                       };
+                               };
+
+                               mmc1 {
+                                       pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA13 periph B */
+                                                        AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* PA12 periph B with pullup */
+                                                        AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;      /* PA11 periph B with pullup */
+                                       };
+
+                                       pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */
+                                                        AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */
+                                                        AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;       /* PA4 periph B with pullup */
+                                       };
+                               };
+
+                               ssc0 {
+                                       pinctrl_ssc0_tx: ssc0_tx-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA24 periph B */
+                                                        AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA25 periph B */
+                                                        AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */
+                                       };
+
+                                       pinctrl_ssc0_rx: ssc0_rx-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
+                                                        AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
+                                                        AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
+                                       };
+                               };
+
+                               spi0 {
+                                       pinctrl_spi0: spi0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA11 periph A SPI0_MISO pin */
+                                                        AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA12 periph A SPI0_MOSI pin */
+                                                        AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */
+                                       };
+                               };
+
+                               spi1 {
+                                       pinctrl_spi1: spi1-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA21 periph B SPI1_MISO pin */
+                                                        AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA22 periph B SPI1_MOSI pin */
+                                                        AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */
+                                       };
+                               };
+
+                               i2c0 {
+                                       pinctrl_i2c0: i2c0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA30 periph A I2C0 data */
+                                                        AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */
+                                       };
+                               };
+
+                               i2c1 {
+                                       pinctrl_i2c1: i2c1-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC0 periph C I2C1 data */
+                                                        AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* PC1 periph C I2C1 clock */
+                                       };
+                               };
+
+                               i2c2 {
+                                       pinctrl_i2c2: i2c2-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB4 periph B I2C2 data */
+                                                        AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB5 periph B I2C2 clock */
+                                       };
+                               };
+
+                               i2c_gpio0 {
+                                       pinctrl_i2c_gpio0: i2c_gpio0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */
+                                                        AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;       /* PA31 gpio multidrive I2C0 clock */
+                                       };
+                               };
+
+                               i2c_gpio1 {
+                                       pinctrl_i2c_gpio1: i2c_gpio1-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PC0 gpio multidrive I2C1 data */
+                                                        AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PC1 gpio multidrive I2C1 clock */
+                                       };
+                               };
+
+                               i2c_gpio2 {
+                                       pinctrl_i2c_gpio2: i2c_gpio2-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PB4 gpio multidrive I2C2 data */
+                                                        AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PB5 gpio multidrive I2C2 clock */
+                                       };
+                               };
+
+                               pwm0 {
+                                       pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+                               };
+
+                               tcb0 {
+                                       pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+                                               atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+                                               atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+                                               atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+                                               atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+                                               atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+                                               atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+                                               atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+                                               atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+                                               atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+                               };
+
+                               tcb1 {
+                                       pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+                                               atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+                                               atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+                                               atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+                                               atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+                                               atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+                                               atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+                                               atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+                                               atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+                                               atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+                                       };
+                               };
+                       };
+
+                       pioA: gpio@fffff400 {
+                               compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+                               reg = <0xfffff400 0x200>;
+                               interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                               clocks = <&pioAB_clk>;
+                       };
+
+                       pioB: gpio@fffff600 {
+                               compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+                               reg = <0xfffff600 0x200>;
+                               interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               #gpio-lines = <19>;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                               clocks = <&pioAB_clk>;
+                       };
+
+                       pioC: gpio@fffff800 {
+                               compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+                               reg = <0xfffff800 0x200>;
+                               interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                               clocks = <&pioCD_clk>;
+                       };
+
+                       pioD: gpio@fffffa00 {
+                               compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+                               reg = <0xfffffa00 0x200>;
+                               interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+                               #gpio-cells = <2>;
+                               gpio-controller;
+                               #gpio-lines = <22>;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                               clocks = <&pioCD_clk>;
+                       };
+
+                       ssc0: ssc@f0010000 {
+                               compatible = "atmel,at91sam9g45-ssc";
+                               reg = <0xf0010000 0x4000>;
+                               interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+                               dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
+                                      <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
+                               dma-names = "tx", "rx";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+                               clocks = <&ssc0_clk>;
+                               clock-names = "pclk";
+                               status = "disabled";
+                       };
+
+                       mmc0: mmc@f0008000 {
+                               compatible = "atmel,hsmci";
+                               reg = <0xf0008000 0x600>;
+                               interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+                               dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
+                               dma-names = "rxtx";
+                               pinctrl-names = "default";
+                               clocks = <&mci0_clk>;
+                               clock-names = "mci_clk";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       mmc1: mmc@f000c000 {
+                               compatible = "atmel,hsmci";
+                               reg = <0xf000c000 0x600>;
+                               interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+                               dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
+                               dma-names = "rxtx";
+                               pinctrl-names = "default";
+                               clocks = <&mci1_clk>;
+                               clock-names = "mci_clk";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               status = "disabled";
+                       };
+
+                       dbgu: serial@fffff200 {
+                               compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                               reg = <0xfffff200 0x200>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_dbgu>;
+                               dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
+                                      <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+                               dma-names = "tx", "rx";
+                               clocks = <&mck>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       usart0: serial@f801c000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xf801c000 0x200>;
+                               interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart0>;
+                               dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
+                                      <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+                               dma-names = "tx", "rx";
+                               clocks = <&usart0_clk>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       usart1: serial@f8020000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xf8020000 0x200>;
+                               interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart1>;
+                               dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
+                                      <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+                               dma-names = "tx", "rx";
+                               clocks = <&usart1_clk>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       usart2: serial@f8024000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xf8024000 0x200>;
+                               interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart2>;
+                               dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
+                                      <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+                               dma-names = "tx", "rx";
+                               clocks = <&usart2_clk>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       i2c0: i2c@f8010000 {
+                               compatible = "atmel,at91sam9x5-i2c";
+                               reg = <0xf8010000 0x100>;
+                               interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+                               dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
+                                      <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_i2c0>;
+                               clocks = <&twi0_clk>;
+                               status = "disabled";
+                       };
+
+                       i2c1: i2c@f8014000 {
+                               compatible = "atmel,at91sam9x5-i2c";
+                               reg = <0xf8014000 0x100>;
+                               interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+                               dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
+                                      <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_i2c1>;
+                               clocks = <&twi1_clk>;
+                               status = "disabled";
+                       };
+
+                       i2c2: i2c@f8018000 {
+                               compatible = "atmel,at91sam9x5-i2c";
+                               reg = <0xf8018000 0x100>;
+                               interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+                               dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
+                                      <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
+                               dma-names = "tx", "rx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_i2c2>;
+                               clocks = <&twi2_clk>;
+                               status = "disabled";
+                       };
+
+                       uart0: serial@f8040000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xf8040000 0x200>;
+                               interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_uart0>;
+                               clocks = <&uart0_clk>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       uart1: serial@f8044000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xf8044000 0x200>;
+                               interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_uart1>;
+                               clocks = <&uart1_clk>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       adc0: adc@f804c000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "atmel,at91sam9x5-adc";
+                               reg = <0xf804c000 0x100>;
+                               interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&adc_clk>,
+                                        <&adc_op_clk>;
+                               clock-names = "adc_clk", "adc_op_clk";
+                               atmel,adc-use-external-triggers;
+                               atmel,adc-channels-used = <0xffff>;
+                               atmel,adc-vref = <3300>;
+                               atmel,adc-startup-time = <40>;
+                               atmel,adc-sample-hold-time = <11>;
+                               atmel,adc-res = <8 10>;
+                               atmel,adc-res-names = "lowres", "highres";
+                               atmel,adc-use-res = "highres";
+
+                               trigger0 {
+                                       trigger-name = "external-rising";
+                                       trigger-value = <0x1>;
+                                       trigger-external;
+                               };
+
+                               trigger1 {
+                                       trigger-name = "external-falling";
+                                       trigger-value = <0x2>;
+                                       trigger-external;
+                               };
+
+                               trigger2 {
+                                       trigger-name = "external-any";
+                                       trigger-value = <0x3>;
+                                       trigger-external;
+                               };
+
+                               trigger3 {
+                                       trigger-name = "continuous";
+                                       trigger-value = <0x6>;
+                               };
+                       };
+
+                       spi0: spi@f0000000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "atmel,at91rm9200-spi";
+                               reg = <0xf0000000 0x100>;
+                               interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+                               dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
+                                      <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
+                               dma-names = "tx", "rx";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_spi0>;
+                               clocks = <&spi0_clk>;
+                               clock-names = "spi_clk";
+                               status = "disabled";
+                       };
+
+                       spi1: spi@f0004000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "atmel,at91rm9200-spi";
+                               reg = <0xf0004000 0x100>;
+                               interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+                               dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
+                                      <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
+                               dma-names = "tx", "rx";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_spi1>;
+                               clocks = <&spi1_clk>;
+                               clock-names = "spi_clk";
+                               status = "disabled";
+                       };
+
+                       usb2: gadget@f803c000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "atmel,at91sam9g45-udc";
+                               reg = <0x00500000 0x80000
+                                      0xf803c000 0x400>;
+                               interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&utmi>, <&udphs_clk>;
+                               clock-names = "hclk", "pclk";
+                               status = "disabled";
+
+                               ep@0 {
+                                       reg = <0>;
+                                       atmel,fifo-size = <64>;
+                                       atmel,nb-banks = <1>;
+                               };
+
+                               ep@1 {
+                                       reg = <1>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <2>;
+                                       atmel,can-dma;
+                                       atmel,can-isoc;
+                               };
+
+                               ep@2 {
+                                       reg = <2>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <2>;
+                                       atmel,can-dma;
+                                       atmel,can-isoc;
+                               };
+
+                               ep@3 {
+                                       reg = <3>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <3>;
+                                       atmel,can-dma;
+                               };
+
+                               ep@4 {
+                                       reg = <4>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <3>;
+                                       atmel,can-dma;
+                               };
+
+                               ep@5 {
+                                       reg = <5>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <3>;
+                                       atmel,can-dma;
+                                       atmel,can-isoc;
+                               };
+
+                               ep@6 {
+                                       reg = <6>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <3>;
+                                       atmel,can-dma;
+                                       atmel,can-isoc;
+                               };
+                       };
+
+                       watchdog@fffffe40 {
+                               compatible = "atmel,at91sam9260-wdt";
+                               reg = <0xfffffe40 0x10>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&clk32k>;
+                               atmel,watchdog-type = "hardware";
+                               atmel,reset-type = "all";
+                               atmel,dbg-halt;
+                               status = "disabled";
+                       };
+
+                       rtc@fffffeb0 {
+                               compatible = "atmel,at91sam9x5-rtc";
+                               reg = <0xfffffeb0 0x40>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&clk32k>;
+                               status = "disabled";
+                       };
+
+                       pwm0: pwm@f8034000 {
+                               compatible = "atmel,at91sam9rl-pwm";
+                               reg = <0xf8034000 0x300>;
+                               interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+                               clocks = <&pwm_clk>;
+                               #pwm-cells = <3>;
+                               status = "disabled";
+                       };
+               };
+
+               nand0: nand@40000000 {
+                       compatible = "atmel,at91rm9200-nand";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       reg = <0x40000000 0x10000000
+                              0xffffe000 0x600         /* PMECC Registers */
+                              0xffffe600 0x200         /* PMECC Error Location Registers */
+                              0x00108000 0x18000       /* PMECC looup table in ROM code  */
+                             >;
+                       atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
+                       atmel,nand-addr-offset = <21>;
+                       atmel,nand-cmd-offset = <22>;
+                       atmel,nand-has-dma;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_nand>;
+                       gpios = <&pioD 5 GPIO_ACTIVE_HIGH
+                                &pioD 4 GPIO_ACTIVE_HIGH
+                                0
+                               >;
+                       status = "disabled";
+               };
+
+               usb0: ohci@00600000 {
+                       compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+                       reg = <0x00600000 0x100000>;
+                       interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+                       clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+                       clock-names = "ohci_clk", "hclk", "uhpck";
+                       status = "disabled";
+               };
+
+               usb1: ehci@00700000 {
+                       compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+                       reg = <0x00700000 0x100000>;
+                       interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+                       clocks = <&utmi>, <&uhphs_clk>;
+                       clock-names = "usb_clk", "ehci_clk";
+                       status = "disabled";
+               };
+       };
+
+       i2c-gpio-0 {
+               compatible = "i2c-gpio";
+               gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+                        &pioA 31 GPIO_ACTIVE_HIGH /* scl */
+                       >;
+               i2c-gpio,sda-open-drain;
+               i2c-gpio,scl-open-drain;
+               i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_i2c_gpio0>;
+               status = "disabled";
+       };
+
+       i2c-gpio-1 {
+               compatible = "i2c-gpio";
+               gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
+                        &pioC 1 GPIO_ACTIVE_HIGH /* scl */
+                       >;
+               i2c-gpio,sda-open-drain;
+               i2c-gpio,scl-open-drain;
+               i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_i2c_gpio1>;
+               status = "disabled";
+       };
+
+       i2c-gpio-2 {
+               compatible = "i2c-gpio";
+               gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+                        &pioB 5 GPIO_ACTIVE_HIGH /* scl */
+                       >;
+               i2c-gpio,sda-open-drain;
+               i2c-gpio,scl-open-drain;
+               i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_i2c_gpio2>;
+               status = "disabled";
+       };
+};
diff --git a/arch/arm/dts/at91sam9x5_can.dtsi b/arch/arm/dts/at91sam9x5_can.dtsi
new file mode 100644 (file)
index 0000000..9727b77
--- /dev/null
@@ -0,0 +1,71 @@
+/*
+ * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       ahb {
+               apb {
+                       pmc: pmc@fffffc00 {
+                               periphck {
+                                       can0_clk: can0_clk@29 {
+                                               #clock-cells = <0>;
+                                               reg = <29>;
+                                       };
+
+                                       can1_clk: can1_clk@30 {
+                                               #clock-cells = <0>;
+                                               reg = <30>;
+                                       };
+                               };
+                       };
+
+                       can0: can@f8000000 {
+                               compatible = "atmel,at91sam9x5-can";
+                               reg = <0xf8000000 0x300>;
+                               interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_can0_rx_tx>;
+                               clocks = <&can0_clk>;
+                               clock-names = "can_clk";
+                               status = "disabled";
+                       };
+
+                       can1: can@f8004000 {
+                               compatible = "atmel,at91sam9x5-can";
+                               reg = <0xf8004000 0x300>;
+                               interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_can1_rx_tx>;
+                               clocks = <&can1_clk>;
+                               clock-names = "can_clk";
+                               status = "disabled";
+                       };
+
+                       pinctrl@fffff400 {
+                               can0 {
+                                       pinctrl_can0_rx_tx: can0_rx_tx {
+                                               atmel,pins =
+                                                       <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE    /* CANRX0, conflicts with DRXD */
+                                                       AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* CANTX0, conflicts with DTXD */
+                                       };
+                               };
+
+                               can1 {
+                                       pinctrl_can1_rx_tx: can1_rx_tx {
+                                               atmel,pins =
+                                                       <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE    /* CANRX1, conflicts with RXD1 */
+                                                       AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;   /* CANTX1, conflicts with TXD1 */
+                                       };
+                               };
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x5_isi.dtsi b/arch/arm/dts/at91sam9x5_isi.dtsi
new file mode 100644 (file)
index 0000000..2c5075f
--- /dev/null
@@ -0,0 +1,72 @@
+/*
+ * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * Image Sensor Interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               isi {
+                                       pinctrl_isi_data_0_7: isi-0-data-0-7 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE    /* ISI_D0, conflicts with LCDDAT0 */
+                                                       AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE     /* ISI_D1, conflicts with LCDDAT1 */
+                                                       AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE     /* ISI_D2, conflicts with LCDDAT2 */
+                                                       AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE     /* ISI_D3, conflicts with LCDDAT3 */
+                                                       AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE     /* ISI_D4, conflicts with LCDDAT4 */
+                                                       AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE     /* ISI_D5, conflicts with LCDDAT5 */
+                                                       AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_NONE     /* ISI_D6, conflicts with LCDDAT6 */
+                                                       AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_NONE     /* ISI_D7, conflicts with LCDDAT7 */
+                                                       AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE    /* ISI_PCK, conflicts with LCDDAT12 */
+                                                       AT91_PIOC 14 AT91_PERIPH_B AT91_PINCTRL_NONE    /* ISI_HSYNC, conflicts with LCDDAT14 */
+                                                       AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* ISI_VSYNC, conflicts with LCDDAT13 */
+                                       };
+
+                                       pinctrl_isi_data_8_9: isi-0-data-8-9 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE    /* ISI_D8, conflicts with LCDDAT8 */
+                                                       AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;   /* ISI_D9, conflicts with LCDDAT9 */
+                                       };
+
+                                       pinctrl_isi_data_10_11: isi-0-data-10-11 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE   /* ISI_D10, conflicts with LCDDAT10 */
+                                                       AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* ISI_D11, conflicts with LCDDAT11 */
+                                       };
+                               };
+                       };
+
+                       pmc: pmc@fffffc00 {
+                               periphck {
+                                       isi_clk: isi_clk@25 {
+                                               #clock-cells = <0>;
+                                               reg = <25>;
+                                       };
+                               };
+                       };
+
+                       isi: isi@f8048000 {
+                               compatible = "atmel,at91sam9g45-isi";
+                               reg = <0xf8048000 0x4000>;
+                               interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_isi_data_0_7>;
+                               clocks = <&isi_clk>;
+                               clock-names = "isi_clk";
+                               status = "disabled";
+                               port {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                               };
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x5_lcd.dtsi b/arch/arm/dts/at91sam9x5_lcd.dtsi
new file mode 100644 (file)
index 0000000..96b7095
--- /dev/null
@@ -0,0 +1,146 @@
+/*
+ * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * LCD controller.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       ahb {
+               apb {
+                       hlcdc: hlcdc@f8038000 {
+                               compatible = "atmel,at91sam9x5-hlcdc";
+                               reg = <0xf8038000 0x4000>;
+                               interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+                               clock-names = "periph_clk","sys_clk", "slow_clk";
+                               status = "disabled";
+                       };
+
+                       pinctrl@fffff400 {
+                               lcd {
+                                       pinctrl_lcd_base: lcd-base-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDVSYNC */
+                                                        AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDHSYNC */
+                                                        AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDDISP */
+                                                        AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDDEN */
+                                                        AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
+                                       };
+
+                                       pinctrl_lcd_pwm: lcd-pwm-0 {
+                                               atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;    /* LCDPWM */
+                                       };
+
+                                       pinctrl_lcd_rgb444: lcd-rgb-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD0 pin */
+                                                        AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD1 pin */
+                                                        AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD2 pin */
+                                                        AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD3 pin */
+                                                        AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD4 pin */
+                                                        AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD5 pin */
+                                                        AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD6 pin */
+                                                        AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD7 pin */
+                                                        AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD8 pin */
+                                                        AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD9 pin */
+                                                        AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD10 pin */
+                                                        AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */
+                                       };
+
+                                       pinctrl_lcd_rgb565: lcd-rgb-1 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD0 pin */
+                                                        AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD1 pin */
+                                                        AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD2 pin */
+                                                        AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD3 pin */
+                                                        AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD4 pin */
+                                                        AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD5 pin */
+                                                        AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD6 pin */
+                                                        AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD7 pin */
+                                                        AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD8 pin */
+                                                        AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD9 pin */
+                                                        AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD10 pin */
+                                                        AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD11 pin */
+                                                        AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD12 pin */
+                                                        AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD13 pin */
+                                                        AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD14 pin */
+                                                        AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */
+                                       };
+
+                                       pinctrl_lcd_rgb666: lcd-rgb-2 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD0 pin */
+                                                        AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD1 pin */
+                                                        AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD2 pin */
+                                                        AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD3 pin */
+                                                        AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD4 pin */
+                                                        AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD5 pin */
+                                                        AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD6 pin */
+                                                        AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD7 pin */
+                                                        AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD8 pin */
+                                                        AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD9 pin */
+                                                        AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD10 pin */
+                                                        AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD11 pin */
+                                                        AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD12 pin */
+                                                        AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD13 pin */
+                                                        AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD14 pin */
+                                                        AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD15 pin */
+                                                        AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD16 pin */
+                                                        AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */
+                                       };
+
+                                       pinctrl_lcd_rgb888: lcd-rgb-3 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD0 pin */
+                                                        AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD1 pin */
+                                                        AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD2 pin */
+                                                        AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD3 pin */
+                                                        AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD4 pin */
+                                                        AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD5 pin */
+                                                        AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD6 pin */
+                                                        AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD7 pin */
+                                                        AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD8 pin */
+                                                        AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* LCDD9 pin */
+                                                        AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD10 pin */
+                                                        AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD11 pin */
+                                                        AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD12 pin */
+                                                        AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD13 pin */
+                                                        AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD14 pin */
+                                                        AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD15 pin */
+                                                        AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD16 pin */
+                                                        AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD17 pin */
+                                                        AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD18 pin */
+                                                        AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD19 pin */
+                                                        AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD20 pin */
+                                                        AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD21 pin */
+                                                        AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE   /* LCDD22 pin */
+                                                        AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
+                                       };
+                               };
+                       };
+
+                       pmc: pmc@fffffc00 {
+                               periphck {
+                                       lcdc_clk: lcdc_clk@25 {
+                                               #clock-cells = <0>;
+                                               reg = <25>;
+                                       };
+                               };
+
+                               systemck {
+                                       lcdck: lcdck@3 {
+                                               #clock-cells = <0>;
+                                               reg = <3>;
+                                               clocks = <&mck>;
+                                       };
+                               };
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x5_macb0.dtsi b/arch/arm/dts/at91sam9x5_macb0.dtsi
new file mode 100644 (file)
index 0000000..1540e60
--- /dev/null
@@ -0,0 +1,67 @@
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               macb0 {
+                                       pinctrl_macb0_rmii: macb0_rmii-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB0 periph A */
+                                                        AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB1 periph A */
+                                                        AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB2 periph A */
+                                                        AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB3 periph A */
+                                                        AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB4 periph A */
+                                                        AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB5 periph A */
+                                                        AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB6 periph A */
+                                                        AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB7 periph A */
+                                                        AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB9 periph A */
+                                                        AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
+                                       };
+
+                                       pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB8 periph A */
+                                                        AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB11 periph A */
+                                                        AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB12 periph A */
+                                                        AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB13 periph A */
+                                                        AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB14 periph A */
+                                                        AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB15 periph A */
+                                                        AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB16 periph A */
+                                                        AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
+                                       };
+                               };
+                       };
+
+                       pmc: pmc@fffffc00 {
+                               periphck {
+                                       macb0_clk: macb0_clk@24 {
+                                               #clock-cells = <0>;
+                                               reg = <24>;
+                                       };
+                               };
+                       };
+
+                       macb0: ethernet@f802c000 {
+                               compatible = "cdns,at91sam9260-macb", "cdns,macb";
+                               reg = <0xf802c000 0x100>;
+                               interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_macb0_rmii>;
+                               clocks = <&macb0_clk>, <&macb0_clk>;
+                               clock-names = "hclk", "pclk";
+                               status = "disabled";
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x5_macb1.dtsi b/arch/arm/dts/at91sam9x5_macb1.dtsi
new file mode 100644 (file)
index 0000000..be2eab4
--- /dev/null
@@ -0,0 +1,55 @@
+/*
+ * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
+ * Ethernet interfaces.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               macb1 {
+                                       pinctrl_macb1_rmii: macb1_rmii-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC16 periph B */
+                                                        AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC18 periph B */
+                                                        AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC19 periph B */
+                                                        AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC20 periph B */
+                                                        AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC21 periph B */
+                                                        AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC27 periph B */
+                                                        AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC28 periph B */
+                                                        AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC29 periph B */
+                                                        AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PC30 periph B */
+                                                        AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
+                                       };
+                               };
+                       };
+
+                       pmc: pmc@fffffc00 {
+                               periphck {
+                                       macb1_clk: macb1_clk@27 {
+                                               #clock-cells = <0>;
+                                               reg = <27>;
+                                       };
+                               };
+                       };
+
+                       macb1: ethernet@f8030000 {
+                               compatible = "cdns,at91sam9260-macb", "cdns,macb";
+                               reg = <0xf8030000 0x100>;
+                               interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_macb1_rmii>;
+                               clocks = <&macb1_clk>, <&macb1_clk>;
+                               clock-names = "hclk", "pclk";
+                               status = "disabled";
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x5_usart3.dtsi b/arch/arm/dts/at91sam9x5_usart3.dtsi
new file mode 100644 (file)
index 0000000..5259219
--- /dev/null
@@ -0,0 +1,69 @@
+/*
+ * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 4 USART.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       aliases {
+               serial4 = &usart3;
+       };
+
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               usart3 {
+                                       pinctrl_usart3: usart3-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* PC22 periph B with pullup */
+                                                        AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;         /* PC23 periph B */
+                                       };
+
+                                       pinctrl_usart3_rts: usart3_rts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;         /* PC24 periph B */
+                                       };
+
+                                       pinctrl_usart3_cts: usart3_cts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;         /* PC25 periph B */
+                                       };
+
+                                       pinctrl_usart3_sck: usart3_sck-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;         /* PC26 periph B */
+                                       };
+                               };
+                       };
+
+                       pmc: pmc@fffffc00 {
+                               periphck {
+                                       usart3_clk: usart3_clk@8 {
+                                               #clock-cells = <0>;
+                                               reg = <8>;
+                                       };
+                               };
+                       };
+
+                       usart3: serial@f8028000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xf8028000 0x200>;
+                               interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart3>;
+                               dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
+                                      <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+                               dma-names = "tx", "rx";
+                               clocks = <&usart3_clk>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x5cm.dtsi b/arch/arm/dts/at91sam9x5cm.dtsi
new file mode 100644 (file)
index 0000000..b098ad8
--- /dev/null
@@ -0,0 +1,100 @@
+/*
+ * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+       memory {
+               reg = <0x20000000 0x8000000>;
+       };
+
+       clocks {
+               slow_xtal {
+                       clock-frequency = <32768>;
+               };
+
+               main_xtal {
+                       clock-frequency = <12000000>;
+               };
+       };
+
+       ahb {
+               apb {
+                       pinctrl@fffff400 {
+                               1wire_cm {
+                                       pinctrl_1wire_cm: 1wire_cm-0 {
+                                               atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
+                                       };
+                               };
+                       };
+
+                       rtc@fffffeb0 {
+                               status = "okay";
+                       };
+               };
+
+               nand0: nand@40000000 {
+                       nand-bus-width = <8>;
+                       nand-ecc-mode = "hw";
+                       atmel,has-pmecc;        /* Enable PMECC */
+                       atmel,pmecc-cap = <2>;
+                       atmel,pmecc-sector-size = <512>;
+                       nand-on-flash-bbt;
+                       status = "okay";
+
+                       at91bootstrap@0 {
+                               label = "at91bootstrap";
+                               reg = <0x0 0x40000>;
+                       };
+
+                       uboot@40000 {
+                               label = "u-boot";
+                               reg = <0x40000 0x80000>;
+                       };
+
+                       ubootenv@c0000 {
+                               label = "U-Boot Env";
+                               reg = <0xc0000 0x140000>;
+                       };
+
+                       kernel@200000 {
+                               label = "kernel";
+                               reg = <0x200000 0x600000>;
+                       };
+
+                       rootfs@800000 {
+                               label = "rootfs";
+                               reg = <0x800000 0x1f800000>;
+                       };
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               pb18 {
+                       label = "pb18";
+                       gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "heartbeat";
+               };
+
+               pd21 {
+                       label = "pd21";
+                       gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       1wire_cm {
+               compatible = "w1-gpio";
+               gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
+               linux,open-drain;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_1wire_cm>;
+               status = "okay";
+       };
+
+};
diff --git a/arch/arm/dts/at91sam9x5dm.dtsi b/arch/arm/dts/at91sam9x5dm.dtsi
new file mode 100644 (file)
index 0000000..a620366
--- /dev/null
@@ -0,0 +1,66 @@
+/*
+ * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Free Electrons
+ *
+ *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+       ahb {
+               apb {
+                       i2c0: i2c@f8010000 {
+                               qt1070: keyboard@1b {
+                                       compatible = "qt1070";
+                                       reg = <0x1b>;
+                                       interrupt-parent = <&pioA>;
+                                       interrupts = <7 0x0>;
+                                       pinctrl-names = "default";
+                                       pinctrl-0 = <&pinctrl_qt1070_irq>;
+                                       wakeup-source;
+                               };
+                       };
+
+                       hlcdc: hlcdc@f8038000 {
+                               atmel,vl-bpix = <4>;
+                               atmel,guard-time = <1>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888>;
+
+                               display-timings {
+                                       u-boot,dm-pre-reloc;
+                                       800x480 {
+                                               clock-frequency = <24000000>;
+                                               hactive = <800>;
+                                               vactive = <480>;
+                                               hsync-len = <128>;
+                                               hfront-porch = <64>;
+                                               hback-porch = <64>;
+                                               vfront-porch = <22>;
+                                               vback-porch = <21>;
+                                               vsync-len = <2>;
+                                               u-boot,dm-pre-reloc;
+                                       };
+                               };
+                       };
+
+                       adc0: adc@f804c000 {
+                               atmel,adc-ts-wires = <4>;
+                               atmel,adc-ts-pressure-threshold = <10000>;
+                               status = "okay";
+                       };
+
+                       pinctrl@fffff400 {
+                               board {
+                                       pinctrl_qt1070_irq: qt1070_irq {
+                                               atmel,pins =
+                                                       <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+                                       };
+                               };
+                       };
+               };
+       };
+};
diff --git a/arch/arm/dts/at91sam9x5ek.dtsi b/arch/arm/dts/at91sam9x5ek.dtsi
new file mode 100644 (file)
index 0000000..f2a532d
--- /dev/null
@@ -0,0 +1,167 @@
+/*
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "at91sam9x5cm.dtsi"
+
+/ {
+       model = "Atmel AT91SAM9X5-EK";
+       compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+       chosen {
+               bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+               stdout-path = "serial0:115200n8";
+               u-boot,dm-pre-reloc;
+       };
+
+       ahb {
+               apb {
+                       mmc0: mmc@f0008000 {
+                               pinctrl-0 = <
+                                       &pinctrl_board_mmc0
+                                       &pinctrl_mmc0_slot0_clk_cmd_dat0
+                                       &pinctrl_mmc0_slot0_dat1_3>;
+                               status = "okay";
+                               slot@0 {
+                                       reg = <0>;
+                                       bus-width = <4>;
+                                       cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+                               };
+                       };
+
+                       mmc1: mmc@f000c000 {
+                               pinctrl-0 = <
+                                       &pinctrl_board_mmc1
+                                       &pinctrl_mmc1_slot0_clk_cmd_dat0
+                                       &pinctrl_mmc1_slot0_dat1_3>;
+                               status = "okay";
+                               slot@0 {
+                                       reg = <0>;
+                                       bus-width = <4>;
+                                       cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+                               };
+                       };
+
+                       dbgu: serial@fffff200 {
+                               u-boot,dm-pre-reloc;
+                               status = "okay";
+                       };
+
+                       usart0: serial@f801c000 {
+                               status = "okay";
+                       };
+
+                       usb2: gadget@f803c000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_board_usb2>;
+                               atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+                               status = "okay";
+                       };
+
+                       i2c0: i2c@f8010000 {
+                               status = "okay";
+
+                               wm8731: wm8731@1a {
+                                       compatible = "wm8731";
+                                       reg = <0x1a>;
+                               };
+                       };
+
+                       adc0: adc@f804c000 {
+                               atmel,adc-ts-wires = <4>;
+                               atmel,adc-ts-pressure-threshold = <10000>;
+                               status = "okay";
+                       };
+
+                       pinctrl@fffff400 {
+                               camera_sensor {
+                                       pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */
+                                       };
+
+                                       pinctrl_sensor_power: sensor_power-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_sensor_reset: sensor_reset-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+                               };
+
+                               mmc0 {
+                                       pinctrl_board_mmc0: mmc0-board {
+                                               atmel,pins =
+                                                       <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;  /* PD15 gpio CD pin pull up and deglitch */
+                                       };
+                               };
+
+                               mmc1 {
+                                       pinctrl_board_mmc1: mmc1-board {
+                                               atmel,pins =
+                                                       <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;  /* PD14 gpio CD pin pull up and deglitch */
+                                       };
+                               };
+
+                               usb2 {
+                                       pinctrl_board_usb2: usb2-board {
+                                               atmel,pins =
+                                                       <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;          /* PB16 gpio vbus sense, deglitch */
+                                       };
+                               };
+                       };
+
+                       spi0: spi@f0000000 {
+                               status = "okay";
+                               cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+                               spi_flash@0 {
+                                       compatible = "spi-flash";
+                                       spi-max-frequency = <50000000>;
+                                       reg = <0>;
+                               };
+                       };
+
+                       watchdog@fffffe40 {
+                               status = "okay";
+                       };
+
+                       ssc0: ssc@f0010000 {
+                               status = "okay";
+                       };
+               };
+
+               usb0: ohci@00600000 {
+                       status = "okay";
+                       num-ports = <3>;
+                       atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+                                          &pioD 19 GPIO_ACTIVE_LOW
+                                          &pioD 20 GPIO_ACTIVE_LOW
+                                         >;
+               };
+
+               usb1: ehci@00700000 {
+                       status = "okay";
+               };
+       };
+
+       sound {
+               compatible = "atmel,sam9x5-wm8731-audio";
+
+               atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+               atmel,audio-routing =
+                       "Headphone Jack", "RHPOUT",
+                       "Headphone Jack", "LHPOUT",
+                       "LLINEIN", "Line In Jack",
+                       "RLINEIN", "Line In Jack";
+
+               atmel,ssc-controller = <&ssc0>;
+               atmel,audio-codec = <&wm8731>;
+       };
+};