]> git.sur5r.net Git - u-boot/commitdiff
tsec: Clean up Broadcom PHY status parsing
authorPeter Tyser <ptyser@xes-inc.com>
Mon, 9 Nov 2009 19:09:44 +0000 (13:09 -0600)
committerBen Warren <biggerbadderben@gmail.com>
Mon, 1 Feb 2010 06:34:34 +0000 (22:34 -0800)
- Remove unnecessary printing "Enet starting in <speed>/<duplex>"
    This same information is already printed during normal ethernet
    operation in the form "Speed: 1000, full duplex".

- Add a check for link before determining link speed and duplex
    If there is no link, speed/duplex don't matter.  This also removes
    the annoying and unneeded "Auto-neg error, defaulting to 10BT/HD"
    message that occurs when no link is detected.

- Whitespace and line > 80 characters cleanup

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
drivers/net/tsec.c

index 67441d4ea7aa3cafe268b93c540366bb10e2f8a2..76902bcd83505d2262d7f45737375d26156f2b1f 100644 (file)
@@ -488,50 +488,41 @@ uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
  */
 uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
 {
+       /* If there is no link, speed and duplex don't matter */
+       if (!priv->link)
+               return 0;
 
-       switch((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >> MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT){
-
-               case 1:
-                       printf("Enet starting in 10BT/HD\n");
-                       priv->duplexity = 0;
-                       priv->speed = 10;
-                       break;
-
-               case 2:
-                       printf("Enet starting in 10BT/FD\n");
-                       priv->duplexity = 1;
-                       priv->speed = 10;
-                       break;
-
-               case 3:
-                       printf("Enet starting in 100BT/HD\n");
-                       priv->duplexity = 0;
-                       priv->speed = 100;
-                       break;
-
-               case 5:
-                       printf("Enet starting in 100BT/FD\n");
-                       priv->duplexity = 1;
-                       priv->speed = 100;
-                       break;
-
-               case 6:
-                       printf("Enet starting in 1000BT/HD\n");
-                       priv->duplexity = 0;
-                       priv->speed = 1000;
-                       break;
-
-               case 7:
-                       printf("Enet starting in 1000BT/FD\n");
-                       priv->duplexity = 1;
-                       priv->speed = 1000;
-                       break;
-
-               default:
-                       printf("Auto-neg error, defaulting to 10BT/HD\n");
-                       priv->duplexity = 0;
-                       priv->speed = 10;
-                       break;
+       switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
+               MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
+       case 1:
+               priv->duplexity = 0;
+               priv->speed = 10;
+               break;
+       case 2:
+               priv->duplexity = 1;
+               priv->speed = 10;
+               break;
+       case 3:
+               priv->duplexity = 0;
+               priv->speed = 100;
+               break;
+       case 5:
+               priv->duplexity = 1;
+               priv->speed = 100;
+               break;
+       case 6:
+               priv->duplexity = 0;
+               priv->speed = 1000;
+               break;
+       case 7:
+               priv->duplexity = 1;
+               priv->speed = 1000;
+               break;
+       default:
+               printf("Auto-neg error, defaulting to 10BT/HD\n");
+               priv->duplexity = 0;
+               priv->speed = 10;
+               break;
        }
 
        return 0;