i.mx6q: mx6qsabrelite: Add the ethernet function support

Signed-off-by: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
CC: Jason Liu <jason.hui@linaro.org>
CC: Stefano Babic <sbabic@denx.de>

diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index 233e652f41167b2c40b7ca67e86300814fe0dcb7..a53b01f35c63156f6e73100751c24f4116fe74ec 100644 (file)
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -29,6 +29,8 @@
 #include <asm/gpio.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
+#include <miiphy.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -40,6 +42,10 @@ DECLARE_GLOBAL_DATA_PTR;
        PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW |               \
        PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 
+#define ENET_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
+       PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED   |             \
+       PAD_CTL_DSE_40ohm   | PAD_CTL_HYS)
+
 int dram_init(void)
 {
        gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -77,6 +83,59 @@ iomux_v3_cfg_t usdhc4_pads[] = {
        MX6Q_PAD_NANDF_D6__GPIO_2_6    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 };
 
+iomux_v3_cfg_t enet_pads1[] = {
+       MX6Q_PAD_ENET_MDIO__ENET_MDIO           | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_ENET_MDC__ENET_MDC             | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL     | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       /* pin 35 - 1 (PHY_AD2) on reset */
+       MX6Q_PAD_RGMII_RXC__GPIO_6_30           | MUX_PAD_CTRL(NO_PAD_CTRL),
+       /* pin 32 - 1 - (MODE0) all */
+       MX6Q_PAD_RGMII_RD0__GPIO_6_25           | MUX_PAD_CTRL(NO_PAD_CTRL),
+       /* pin 31 - 1 - (MODE1) all */
+       MX6Q_PAD_RGMII_RD1__GPIO_6_27           | MUX_PAD_CTRL(NO_PAD_CTRL),
+       /* pin 28 - 1 - (MODE2) all */
+       MX6Q_PAD_RGMII_RD2__GPIO_6_28           | MUX_PAD_CTRL(NO_PAD_CTRL),
+       /* pin 27 - 1 - (MODE3) all */
+       MX6Q_PAD_RGMII_RD3__GPIO_6_29           | MUX_PAD_CTRL(NO_PAD_CTRL),
+       /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
+       MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24        | MUX_PAD_CTRL(NO_PAD_CTRL),
+       /* pin 42 PHY nRST */
+       MX6Q_PAD_EIM_D23__GPIO_3_23             | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+iomux_v3_cfg_t enet_pads2[] = {
+       MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3      | MUX_PAD_CTRL(ENET_PAD_CTRL),
+       MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL     | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static void setup_iomux_enet(void)
+{
+       gpio_direction_output(87, 0);  /* GPIO 3-23 */
+       gpio_direction_output(190, 1); /* GPIO 6-30 */
+       gpio_direction_output(185, 1); /* GPIO 6-25 */
+       gpio_direction_output(187, 1); /* GPIO 6-27 */
+       gpio_direction_output(188, 1); /* GPIO 6-28*/
+       gpio_direction_output(189, 1); /* GPIO 6-29 */
+       imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
+       gpio_direction_output(184, 1); /* GPIO 6-24 */
+
+       /* Need delay 10ms according to KSZ9021 spec */
+       udelay(1000 * 10);
+       gpio_direction_output(87, 1);  /* GPIO 3-23 */
+
+       imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
+}
+
 static void setup_iomux_uart(void)
 {
        imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
@@ -134,6 +193,55 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#define MII_1000BASET_CTRL             0x9
+#define MII_EXTENDED_CTRL              0xb
+#define MII_EXTENDED_DATAW             0xc
+
+int fecmxc_mii_postcall(int phy)
+{
+       /* prefer master mode */
+       miiphy_write("FEC", phy, MII_1000BASET_CTRL, 0x0f00);
+
+       /* min rx data delay */
+       miiphy_write("FEC", phy, MII_EXTENDED_CTRL, 0x8105);
+       miiphy_write("FEC", phy, MII_EXTENDED_DATAW, 0x0000);
+
+       /* max rx/tx clock delay, min rx/tx control delay */
+       miiphy_write("FEC", phy, MII_EXTENDED_CTRL, 0x8104);
+       miiphy_write("FEC", phy, MII_EXTENDED_DATAW, 0xf0f0);
+       miiphy_write("FEC", phy, MII_EXTENDED_CTRL, 0x104);
+
+       return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+       struct eth_device *dev;
+       int ret;
+
+       setup_iomux_enet();
+
+       ret = cpu_eth_init(bis);
+       if (ret) {
+               printf("FEC MXC: %s:failed\n", __func__);
+               return ret;
+       }
+
+       dev = eth_get_dev_by_name("FEC");
+       if (!dev) {
+               printf("FEC MXC: Unable to get FEC device entry\n");
+               return -EINVAL;
+       }
+
+       ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+       if (ret) {
+               printf("FEC MXC: Unable to register FEC mii postcall\n");
+               return ret;
+       }
+
+       return 0;
+}
+
 int board_early_init_f(void)
 {
        setup_iomux_uart();

diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index ba09f15a73808862acae0b32476e55e6bb8338ec..d650ee340ab25c629b5808d0e770c11b47a1ad82 100644 (file)
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -56,6 +56,17 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define        CONFIG_FEC_MXC
+#define        CONFIG_MII
+#define IMX_FEC_BASE                   ENET_BASE_ADDR
+#define        CONFIG_FEC_XCV_TYPE             RGMII
+#define CONFIG_ETHPRIME                        "FEC"
+#define CONFIG_FEC_MXC_PHYADDR         6
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX              1
@@ -66,8 +77,6 @@
 #include <config_cmd_default.h>
 
 #undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 
 #define CONFIG_BOOTDELAY               3