arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode

When booting in JTAG mode, there is no way to use soft break-points, and
no way of knowing when SPL has finished executing (so the user can issue
a 'halt' command to load u-boot.bin for example)

Add a debug output and simple loop to stop execution at the completion of
the SPL initialisation as a pseudo break-point when booting in JTAG mode

Signed-off-by: Graeme Russ <gruss@tss-engineering.com>

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
index 2a5f8175d06ba830c127c9ec070b3a75fc979e1c..d7956e57de213819ff313b10045c66e5370bbee9 100644 (file)
--- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
@@ -157,6 +157,11 @@ void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr,
        data->boot_mode_idx = bootmode;
 
        mxs_power_wait_pswitch();
+
+       if (mxs_boot_modes[data->boot_mode_idx].boot_pads == MXS_BM_JTAG) {
+               debug("SPL: Waiting for JTAG user\n");
+               asm volatile ("x: b x");
+       }
 }
 
 /* Support aparatus */

diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h
index 062f3de1d05bfd4de1011762b55fbb6311c84fc9..46787237540c2c697fd253bc76bb0c97a3089144 100644 (file)
--- a/arch/arm/include/asm/arch-mxs/sys_proto.h
+++ b/arch/arm/include/asm/arch-mxs/sys_proto.h
@@ -74,6 +74,23 @@ static const struct mxs_pair mxs_boot_modes[] = {
 #endif
 };
 
+#define MXS_BM_USB                     0x00
+#define MXS_BM_I2C_MASTER_3V3          0x01
+#define MXS_BM_I2C_MASTER_1V8          0x11
+#define MXS_BM_SPI2_MASTER_3V3_NOR     0x02
+#define MXS_BM_SPI2_MASTER_1V8_NOR     0x12
+#define MXS_BM_SPI3_MASTER_3V3_NOR     0x03
+#define MXS_BM_SPI3_MASTER_1V8_NOR     0x13
+#define MXS_BM_NAND_3V3                        0x04
+#define MXS_BM_NAND_1V8                        0x14
+#define MXS_BM_JTAG                    0x06
+#define MXS_BM_SPI3_MASTER_3V3_EEPROM  0x08
+#define MXS_BM_SPI3_MASTER_1V8_EEPROM  0x18
+#define MXS_BM_SDMMC0_3V3              0x09
+#define MXS_BM_SDMMC0_1V8              0x19
+#define MXS_BM_SDMMC1_3V3              0x0a
+#define MXS_BM_SDMMC1_1V8              0x1a
+
 struct mxs_spl_data {
        uint8_t         boot_mode_idx;
        uint32_t        mem_dram_size;