source "board/intel/crownbay/Kconfig"
 
+config PCIE_ECAM_BASE
+       hex
+    default 0xe0000000
+       help
+         This is the memory-mapped address of PCI configuration space, which
+         is only available through the Enhanced Configuration Access
+         Mechanism (ECAM) with PCI Express. It can be set up almost
+         anywhere. Before it is set up, it is possible to access PCI
+         configuration space through I/O access, but memory access is more
+         convenient. Using this, PCI can be scanned and configured. This
+         should be set to a region that does not conflict with memory
+         assigned to PCI devices - i.e. the memory and prefetch regions, as
+         passed to pci_set_region().
+
 endmenu
 
                .mchbar = DEFAULT_MCHBAR,
                .dmibar = DEFAULT_DMIBAR,
                .epbar = DEFAULT_EPBAR,
-               .pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
+               .pciexbar = CONFIG_PCIE_ECAM_BASE,
                .smbusbar = SMBUS_IO_BASE,
                .wdbbar = 0x4000000,
                .wdbsize = 0x1000,
 
 #define DEFAULT_EPBAR          0xfed19000      /* 4 KB */
 #define DEFAULT_RCBABASE       0xfed1c000
 /* 4 KB per PCIe device */
-#define DEFAULT_PCIEXBAR       CONFIG_MMCONF_BASE_ADDRESS
+#define DEFAULT_PCIEXBAR       CONFIG_PCIE_ECAM_BASE
 
 /* Device 0:0.0 PCI configuration space (Host Bridge) */
 #define EPBAR          0x40
 
        select MARK_GRAPHICS_MEM_WRCOMB
        select BOARD_ROMSIZE_KB_8192
 
-config MMCONF_BASE_ADDRESS
-       hex
+config PCIE_ECAM_BASE
        default 0xf0000000
 
 config EARLY_POST_CROS_EC