tegra20-tec.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
- tegra20-whistler.dtb \
tegra20-colibri.dtb \
tegra30-apalis.dtb \
tegra30-beaver.dtb \
+++ /dev/null
-/dts-v1/;
-
-#include "tegra20.dtsi"
-
-/ {
- model = "NVIDIA Tegra20 Whistler evaluation board";
- compatible = "nvidia,whistler", "nvidia,tegra20";
-
- chosen {
- stdout-path = &uarta;
- };
-
- aliases {
- i2c0 = "/i2c@7000d000";
- usb0 = "/usb@c5008000";
- mmc0 = "/sdhci@c8000600";
- mmc1 = "/sdhci@c8000400";
- };
-
- memory {
- device_type = "memory";
- reg = < 0x00000000 0x20000000 >;
- };
-
- serial@70006000 {
- clock-frequency = < 216000000 >;
- };
-
- i2c@7000d000 {
- status = "okay";
- clock-frequency = <100000>;
-
- pmic@3c {
- compatible = "maxim,max8907b";
- reg = <0x3c>;
-
- clk_32k: clock {
- compatible = "fixed-clock";
- /*
- * leave out for now due to CPP:
- * #clock-cells = <0>;
- */
- clock-frequency = <32768>;
- };
- };
- };
-
- usb@c5008000 {
- status = "okay";
- };
-
- sdhci@c8000400 {
- status = "okay";
- wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
- bus-width = <8>;
- };
-
- sdhci@c8000600 {
- status = "okay";
- bus-width = <8>;
- non-removable;
- };
-
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg=<0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
-};
bool "NVIDIA Tegra20 Ventana evaluation board"
select BOARD_LATE_INIT
-config TARGET_WHISTLER
- bool "NVIDIA Tegra20 Whistler evaluation board"
- select BOARD_LATE_INIT
-
config TARGET_COLIBRI_T20
bool "Toradex Colibri T20 board"
select BOARD_LATE_INIT
source "board/avionic-design/tec/Kconfig"
source "board/compulab/trimslice/Kconfig"
source "board/nvidia/ventana/Kconfig"
-source "board/nvidia/whistler/Kconfig"
source "board/toradex/colibri_t20/Kconfig"
endif
+++ /dev/null
-if TARGET_WHISTLER
-
-config SYS_BOARD
- default "whistler"
-
-config SYS_VENDOR
- default "nvidia"
-
-config SYS_CONFIG_NAME
- default "whistler"
-
-endif
+++ /dev/null
-WHISTLER BOARD
-M: Tom Warren <twarren@nvidia.com>
-M: Stephen Warren <swarren@nvidia.com>
-S: Maintained
-F: board/nvidia/whistler/
-F: include/configs/whistler.h
-F: configs/whistler_defconfig
+++ /dev/null
-#
-# (C) Copyright 2010-2012
-# NVIDIA Corporation <www.nvidia.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := whistler.o
+++ /dev/null
-/*
- * (C) Copyright 2010-2012
- * NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/io.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/funcmux.h>
-#include <asm/arch/pinmux.h>
-#include <asm/gpio.h>
-#include <i2c.h>
-
-#ifdef CONFIG_MMC_SDHCI_TEGRA
-/*
- * Routine: pin_mux_mmc
- * Description: setup the pin muxes/tristate values for the SDMMC(s)
- */
-void pin_mux_mmc(void)
-{
- struct udevice *dev;
- uchar val;
- int ret;
-
- /* Turn on MAX8907B LDO12 to 2.8V for J40 power */
- ret = i2c_get_chip_for_busnum(0, 0x3c, 1, &dev);
- if (ret) {
- printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
- return;
- }
- val = 0x29;
- ret = dm_i2c_write(dev, 0x46, &val, 1);
- if (ret)
- printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
- val = 0x00;
- ret = dm_i2c_write(dev, 0x45, &val, 1);
- if (ret)
- printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
- val = 0x1f;
- ret = dm_i2c_write(dev, 0x44, &val, 1);
- if (ret)
- printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
-
- funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
- funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
-}
-#endif
-
-/* this is a weak define that we are overriding */
-void pin_mux_usb(void)
-{
- struct udevice *dev;
- uchar val;
- int ret;
-
- /*
- * This is a hack. This should be represented in DT using the
- * vbus-gpio property. However, U-Boot's DT support doesn't
- * support any GPIO controller other than the Tegra's yet.
- */
-
- /* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
- ret = i2c_get_chip_for_busnum(0, 0x20, 1, &dev);
- if (ret) {
- printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
- return;
- }
- val = 0x03;
- ret = dm_i2c_write(dev, 2, &val, 1);
- if (ret)
- printf("i2c_write 0 0x20 2 failed: %d\n", ret);
- val = 0xfc;
- ret = dm_i2c_write(dev, 6, &val, 1);
- if (ret)
- printf("i2c_write 0 0x20 6 failed: %d\n", ret);
-}
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_TEGRA=y
-CONFIG_TEGRA20=y
-CONFIG_TARGET_WHISTLER=y
-CONFIG_DEFAULT_DEVICE_TREE="tegra20-whistler"
-CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_STDIO_DEREGISTER=y
-CONFIG_SYS_PROMPT="Tegra20 (Whistler) # "
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_EXT4_WRITE=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_ISO_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_SPL_DM=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
+++ /dev/null
-/*
- * (C) Copyright 2010-2012
- * NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/sizes.h>
-#include "tegra20-common.h"
-
-/* High-level configuration options */
-#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler"
-
-/* Board-specific serial config */
-#define CONFIG_TEGRA_ENABLE_UARTA
-#define CONFIG_TEGRA_UARTA_UAA_UAB
-#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-
-#define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER
-
-/* I2C */
-#define CONFIG_SYS_I2C_TEGRA
-
-/*
- * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes
- * the user plugged the standard 8GB MoviNAND card into J29/HSMMC/POP. If
- * they didn't, the boot sector layout may be different. However, use of that
- * particular card is standard practice as far as I know.
- */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_SYS_MMC_ENV_PART 2
-
-/* USB Host support */
-#define CONFIG_USB_EHCI_TEGRA
-
-/* USB networking support */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-
-/* General networking support */
-
-#include "tegra-common-post.h"
-
-#endif /* __CONFIG_H */
projects / u-boot / commitdiff