]> git.sur5r.net Git - u-boot/commitdiff
i8042: Use functions to handle register access
authorSimon Glass <sjg@chromium.org>
Mon, 19 Oct 2015 03:17:19 +0000 (21:17 -0600)
committerSimon Glass <sjg@chromium.org>
Fri, 20 Nov 2015 03:13:40 +0000 (20:13 -0700)
At present the register access in kbd_reset() is quite primitive. This makes
it hard to follow.

Create functions to read and write data, both to a single register, and via
the command/data approach.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-on: Intel Crown Bay and QEMU
Tested-by: Bin Meng <bmeng.cn@gmail.com>
drivers/input/i8042.c

index 7b95b21f8a58110114ffd294e4442e79c7741097..dbd4b0062012281e097081a3c511732fd199a3a5 100644 (file)
@@ -446,53 +446,66 @@ static void kbd_conv_char(unsigned char scan_code)
        return;
 }
 
-static int kbd_reset(void)
+static int kbd_write(int reg, int value)
 {
-       u8 config;
-
-       /* controller self test */
-       if (kbd_input_empty() == 0)
-               return -1;
-       out8(I8042_CMD_REG, CMD_SELF_TEST);
-       if (kbd_output_full() == 0)
-               return -1;
-       if (in8(I8042_DATA_REG) != KBC_TEST_OK)
+       if (!kbd_input_empty())
                return -1;
+       out8(reg, value);
 
-       /* keyboard reset */
-       if (kbd_input_empty() == 0)
+       return 0;
+}
+
+static int kbd_read(int reg)
+{
+       if (!kbd_output_full())
                return -1;
-       out8(I8042_DATA_REG, CMD_RESET_KBD);
-       if (kbd_output_full() == 0)
+
+       return in8(reg);
+}
+
+static int kbd_cmd_read(int cmd)
+{
+       if (kbd_write(I8042_CMD_REG, cmd))
                return -1;
-       if (in8(I8042_DATA_REG) != KBD_ACK)
+
+       return kbd_read(I8042_DATA_REG);
+}
+
+static int kbd_cmd_write(int cmd, int data)
+{
+       if (kbd_write(I8042_CMD_REG, cmd))
                return -1;
-       if (kbd_output_full() == 0)
+
+       return kbd_write(I8042_DATA_REG, data);
+}
+
+static int kbd_reset(void)
+{
+       int config;
+
+       /* controller self test */
+       if (kbd_cmd_read(CMD_SELF_TEST) != KBC_TEST_OK)
                return -1;
-       if (in8(I8042_DATA_REG) != KBD_POR)
+
+       /* keyboard reset */
+       if (kbd_write(I8042_DATA_REG, CMD_RESET_KBD) ||
+           kbd_read(I8042_DATA_REG) != KBD_ACK ||
+           kbd_read(I8042_DATA_REG) != KBD_POR)
                return -1;
 
        /* set AT translation and disable irq */
-       if (kbd_input_empty() == 0)
-               return -1;
-       out8(I8042_CMD_REG, CMD_RD_CONFIG);
-       if (kbd_output_full() == 0)
+       config = kbd_cmd_read(CMD_RD_CONFIG);
+       if (config == -1)
                return -1;
-       config = in8(I8042_DATA_REG);
+
        config |= CONFIG_AT_TRANS;
        config &= ~(CONFIG_KIRQ_EN | CONFIG_MIRQ_EN);
-       if (kbd_input_empty() == 0)
+       if (kbd_cmd_write(CMD_WR_CONFIG, config))
                return -1;
-       out8(I8042_CMD_REG, CMD_WR_CONFIG);
-       if (kbd_input_empty() == 0)
-               return -1;
-       out8(I8042_DATA_REG, config);
 
        /* enable keyboard */
-       if (kbd_input_empty() == 0)
-               return -1;
-       out8(I8042_CMD_REG, CMD_KBD_EN);
-       if (kbd_input_empty() == 0)
+       if (kbd_write(I8042_CMD_REG, CMD_KBD_EN) ||
+           !kbd_input_empty())
                return -1;
 
        return 0;