]> git.sur5r.net Git - u-boot/commitdiff
sunxi: Add defconfig and dts for the NanoPi NEO
authorJelle van der Waa <jelle@vdwaa.nl>
Tue, 13 Sep 2016 16:03:23 +0000 (18:03 +0200)
committerHans de Goede <hdegoede@redhat.com>
Sun, 18 Sep 2016 12:39:16 +0000 (14:39 +0200)
The NanoPi NEO is a simple h3 board with 512MB RAM, ethernet, one usb
and one usb OTG connector.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
arch/arm/dts/Makefile
arch/arm/dts/sun8i-h3-nanopi-neo.dts [new file with mode: 0644]
board/sunxi/MAINTAINERS
configs/nanopi_neo_defconfig [new file with mode: 0644]

index a4ab06964e208c380edb412521dc5e41874f1729..1d41d485558d4b3f4df131d51d5b4eaf6f3a06c4 100644 (file)
@@ -261,7 +261,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
        sun8i-h3-orangepi-pc.dtb \
        sun8i-h3-orangepi-pc-plus.dtb \
        sun8i-h3-orangepi-plus.dtb \
-       sun8i-h3-orangepi-plus2e.dtb
+       sun8i-h3-orangepi-plus2e.dtb \
+       sun8i-h3-nanopi-neo.dtb
 dtb-$(CONFIG_MACH_SUN50I) += \
        sun50i-a64-pine64-plus.dtb \
        sun50i-a64-pine64.dtb
diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/dts/sun8i-h3-nanopi-neo.dts
new file mode 100644 (file)
index 0000000..3d64caf
--- /dev/null
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+       model = "FriendlyARM NanoPi NEO";
+       compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+               pwr {
+                       label = "nanopi:green:pwr";
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+                       default-state = "on";
+               };
+
+               status {
+                       label = "nanopi:blue:status";
+                       gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+               };
+       };
+};
+
+&ehci3 {
+       status = "okay";
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+       cd-inverted;
+       status = "okay";
+};
+
+&ohci3 {
+       status = "okay";
+};
+
+&pio {
+       leds_opc: led-pins {
+               allwinner,pins = "PA10";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+};
+
+&r_pio {
+       leds_r_opc: led-pins {
+               allwinner,pins = "PL10";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usbphy {
+       /* USB VBUS is always on */
+       status = "okay";
+};
index 6f13cf68df47265ed908bf7ff1b41367669e280b..f7129b7d53a5bd668ea1ca7530df27570dded0e3 100644 (file)
@@ -217,6 +217,11 @@ M: Siarhei Siamashka <siarhei.siamashka@gmail.com>
 S:     Maintained
 F:     configs/MSI_Primo81_defconfig
 
+NANOPI-NEO BOARD
+M:     Jelle van der Waa <jelle@vdwaa.nl>
+S:     Maintained
+F:     configs/nanopi_neo_defconfig
+
 R16 EVB PARROT BOARD
 M:     Quentin Schulz <quentin.schulz@free-electrons.com>
 S:     Maintained
diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig
new file mode 100644 (file)
index 0000000..536c9cd
--- /dev/null
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC0_CD_PIN="PF6"
+# CONFIG_VIDEO is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SUN8I_EMAC=y