Sync device trees with Linux for easier DT life.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 0>;
};
serial1: serial@54006900 {
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 1>;
};
serial2: serial@54006a00 {
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 2>;
};
serial3: serial@54006b00 {
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 3>;
};
system_bus: system-bus@58c00000 {
reg = <0x59801000 0x400>;
};
- mio: mioctrl@59810000 {
- /* specify compatible in each SoC DTSI */
+ mioctrl@59810000 {
+ compatible = "socionext,uniphier-mioctrl",
+ "simple-mfd", "syscon";
reg = <0x59810000 0x800>;
- #clock-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ mio_clk: clock {
+ #clock-cells = <1>;
+ };
+
+ mio_rst: reset {
+ #reset-cells = <1>;
+ };
};
- peri: perictrl@59820000 {
- /* specify compatible in each SoC DTSI */
+ perictrl@59820000 {
+ compatible = "socionext,uniphier-perictrl",
+ "simple-mfd", "syscon";
reg = <0x59820000 0x200>;
- #clock-cells = <1>;
+
+ peri_clk: clock {
+ #clock-cells = <1>;
+ };
+
+ peri_rst: reset {
+ #reset-cells = <1>;
+ };
};
timer@60000200 {
};
soc-glue@5f800000 {
- compatible = "simple-mfd", "syscon";
+ compatible = "socionext,uniphier-soc-glue",
+ "simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
u-boot,dm-pre-reloc;
};
};
- sysctrl: sysctrl@61840000 {
- /* specify compatible in each SoC DTSI */
+ sysctrl@61840000 {
+ compatible = "socionext,uniphier-sysctrl",
+ "simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
- #clock-cells = <1>;
- clock-names = "ref";
- clocks = <&refclk>;
+
+ sys_clk: clock {
+ #clock-cells = <1>;
+ };
+
+ sys_rst: reset {
+ #reset-cells = <1>;
+ };
};
nand: nand@68000000 {
clock-frequency = <25000000>;
};
- uart_clk: uart_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <58820000>;
- };
-
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
timer {
compatible = "arm,armv8-timer";
- interrupts = <1 13 0xf01>,
- <1 14 0xf01>,
- <1 11 0xf01>,
- <1 10 0xf01>;
+ interrupts = <1 13 4>,
+ <1 14 4>,
+ <1 11 4>,
+ <1 10 4>;
};
soc {
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 0>;
clock-frequency = <58820000>;
};
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 1>;
clock-frequency = <58820000>;
};
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 2>;
clock-frequency = <58820000>;
};
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 3>;
clock-frequency = <58820000>;
};
reg = <0x59801000 0x400>;
};
+ perictrl@59820000 {
+ compatible = "socionext,uniphier-perictrl",
+ "simple-mfd", "syscon";
+ reg = <0x59820000 0x200>;
+
+ peri_clk: clock {
+ compatible = "socionext,uniphier-ld11-peri-clock";
+ #clock-cells = <1>;
+ };
+
+ peri_rst: reset {
+ compatible = "socionext,uniphier-ld11-peri-reset";
+ #reset-cells = <1>;
+ };
+ };
+
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
interrupts = <0 243 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio 3>, <&mio 6>;
+ clocks = <&mio_clk 3>, <&mio_clk 6>;
};
usb1: usb@5a810100 {
interrupts = <0 244 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio 4>, <&mio 6>;
+ clocks = <&mio_clk 4>, <&mio_clk 6>;
};
usb2: usb@5a820100 {
interrupts = <0 245 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio 5>, <&mio 6>;
+ clocks = <&mio_clk 5>, <&mio_clk 6>;
};
- mio: mioctrl@5b3e0000 {
- compatible = "socionext,ph1-ld11-mioctrl";
+ mioctrl@5b3e0000 {
+ compatible = "socionext,uniphier-mioctrl",
+ "simple-mfd", "syscon";
reg = <0x5b3e0000 0x800>;
- #clock-cells = <1>;
+
+ mio_clk: clock {
+ compatible = "socionext,uniphier-ld11-mio-clock";
+ #clock-cells = <1>;
+ };
+
+ mio_rst: reset {
+ compatible = "socionext,uniphier-ld11-mio-reset";
+ #reset-cells = <1>;
+ resets = <&sys_rst 7>;
+ };
};
soc-glue@5f800000 {
- compatible = "simple-mfd", "syscon";
+ compatible = "socionext,uniphier-soc-glue",
+ "simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
u-boot,dm-pre-reloc;
#interrupt-cells = <3>;
interrupts = <1 9 4>;
};
+
+ sysctrl@61840000 {
+ compatible = "socionext,uniphier-ld11-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0x61840000 0x4000>;
+
+ sys_clk: clock {
+ compatible = "socionext,uniphier-ld11-clock";
+ #clock-cells = <1>;
+ };
+
+ sys_rst: reset {
+ compatible = "socionext,uniphier-ld11-reset";
+ #reset-cells = <1>;
+ };
+ };
};
};
clock-frequency = <25000000>;
};
- uart_clk: uart_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <58820000>;
- };
-
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
timer {
compatible = "arm,armv8-timer";
- interrupts = <1 13 0xf01>,
- <1 14 0xf01>,
- <1 11 0xf01>,
- <1 10 0xf01>;
+ interrupts = <1 13 4>,
+ <1 14 4>,
+ <1 11 4>,
+ <1 10 4>;
};
soc {
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 0>;
clock-frequency = <58820000>;
};
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 1>;
clock-frequency = <58820000>;
};
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 2>;
clock-frequency = <58820000>;
};
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- clocks = <&uart_clk>;
+ clocks = <&peri_clk 3>;
clock-frequency = <58820000>;
};
reg = <0x59801000 0x400>;
};
- mio: mioctrl@59810000 {
- compatible = "socionext,ph1-ld20-mioctrl";
+ mioctrl@59810000 {
+ compatible = "socionext,uniphier-mioctrl",
+ "simple-mfd", "syscon";
reg = <0x59810000 0x800>;
- #clock-cells = <1>;
+
+ mio_clk: clock {
+ compatible = "socionext,uniphier-ld20-mio-clock";
+ #clock-cells = <1>;
+ };
+
+ mio_rst: reset {
+ compatible = "socionext,uniphier-ld20-mio-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ perictrl@59820000 {
+ compatible = "socionext,uniphier-perictrl",
+ "simple-mfd", "syscon";
+ reg = <0x59820000 0x200>;
+
+ peri_clk: clock {
+ compatible = "socionext,uniphier-ld20-peri-clock";
+ #clock-cells = <1>;
+ };
+
+ peri_rst: reset {
+ compatible = "socionext,uniphier-ld20-peri-reset";
+ #reset-cells = <1>;
+ };
};
sd: sdhc@5a400000 {
interrupts = <0 76 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd>;
- clocks = <&mio 0>;
+ clocks = <&mio_clk 0>;
bus-width = <4>;
};
soc-glue@5f800000 {
- compatible = "simple-mfd", "syscon";
+ compatible = "socionext,uniphier-soc-glue",
+ "simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
u-boot,dm-pre-reloc;
#interrupt-cells = <3>;
interrupts = <1 9 4>;
};
+
+ sysctrl@61840000 {
+ compatible = "socionext,uniphier-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0x61840000 0x4000>;
+
+ sys_clk: clock {
+ compatible = "socionext,uniphier-ld20-clock";
+ #clock-cells = <1>;
+ };
+
+ sys_rst: reset {
+ compatible = "socionext,uniphier-ld20-reset";
+ #reset-cells = <1>;
+ };
+ };
};
};
clock-frequency = <50000000>;
};
- uart_clk: uart_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <36864000>;
- };
-
iobus_clk: iobus_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
- clocks = <&mio 0>;
+ clocks = <&mio_clk 0>;
bus-width = <4>;
};
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_emmc>;
pinctrl-1 = <&pinctrl_emmc_1v8>;
- clocks = <&mio 1>;
+ clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio 3>, <&mio 6>;
+ clocks = <&mio_clk 3>, <&mio_clk 6>;
};
usb1: usb@5a810100 {
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio 4>, <&mio 6>;
+ clocks = <&mio_clk 4>, <&mio_clk 6>;
};
usb2: usb@5a820100 {
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio 5>, <&mio 6>;
+ clocks = <&mio_clk 5>, <&mio_clk 6>;
};
aidet@61830000 {
clock-frequency = <36864000>;
};
-&mio {
- compatible = "socionext,ph1-ld4-mioctrl";
- clock-names = "stdmac", "ehci";
- clocks = <&sysctrl 10>, <&sysctrl 18>;
+&mio_clk {
+ compatible = "socionext,uniphier-ld4-mio-clock";
+};
+
+&mio_rst {
+ compatible = "socionext,uniphier-ld4-mio-reset";
+};
+
+&peri_clk {
+ compatible = "socionext,uniphier-ld4-peri-clock";
};
-&peri {
- compatible = "socionext,ph1-ld4-perictrl";
- clock-names = "uart", "i2c";
- clocks = <&sysctrl 3>, <&sysctrl 4>;
+&peri_rst {
+ compatible = "socionext,uniphier-ld4-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-ld4-pinctrl";
};
-&sysctrl {
- compatible = "socionext,ph1-ld4-sysctrl";
+&sys_clk {
+ compatible = "socionext,uniphier-ld4-clock";
+};
+
+&sys_rst {
+ compatible = "socionext,uniphier-ld4-reset";
};
u-boot,dm-pre-reloc;
};
-&mio {
+&mio_clk {
u-boot,dm-pre-reloc;
};
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
- clocks = <&mio 0>;
+ clocks = <&mio_clk 0>;
bus-width = <4>;
};
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_emmc>;
pinctrl-1 = <&pinctrl_emmc_1v8>;
- clocks = <&mio 1>;
+ clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd1>;
pinctrl-1 = <&pinctrl_sd1_1v8>;
- clocks = <&mio 2>;
+ clocks = <&mio_clk 2>;
bus-width = <4>;
};
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio 3>, <&mio 6>;
+ clocks = <&mio_clk 3>, <&mio_clk 6>;
};
usb3: usb@5a810100 {
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
- clocks = <&mio 4>, <&mio 6>;
+ clocks = <&mio_clk 4>, <&mio_clk 6>;
};
aidet@5fc20000 {
clock-frequency = <73728000>;
};
-&mio {
- compatible = "socionext,ph1-pro4-mioctrl";
- clock-names = "stdmac", "ehci";
- clocks = <&sysctrl 10>, <&sysctrl 18>;
+&mio_clk {
+ compatible = "socionext,uniphier-pro4-mio-clock";
};
-&peri {
- compatible = "socionext,ph1-pro4-perictrl";
- clock-names = "uart", "fi2c";
- clocks = <&sysctrl 3>, <&sysctrl 4>;
+&mio_rst {
+ compatible = "socionext,uniphier-pro4-mio-reset";
+};
+
+&peri_clk {
+ compatible = "socionext,uniphier-pro4-peri-clock";
+};
+
+&peri_rst {
+ compatible = "socionext,uniphier-pro4-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-pro4-pinctrl";
};
-&sysctrl {
- compatible = "socionext,ph1-pro4-sysctrl";
+&sys_clk {
+ compatible = "socionext,uniphier-pro4-clock";
+};
+
+&sys_rst {
+ compatible = "socionext,uniphier-pro4-reset";
};
clock-frequency = <50000000>;
};
- uart_clk: uart_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <73728000>;
- };
-
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
interrupts = <0 78 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
- clocks = <&mio 1>;
+ clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
- clocks = <&mio 0>;
+ clocks = <&mio_clk 0>;
bus-width = <4>;
};
clock-frequency = <73728000>;
};
-&mio {
- compatible = "socionext,ph1-pro5-mioctrl";
- clock-names = "stdmac";
- clocks = <&sysctrl 10>;
+&mio_clk {
+ compatible = "socionext,uniphier-pro5-mio-clock";
+};
+
+&mio_rst {
+ compatible = "socionext,uniphier-pro5-mio-reset";
+};
+
+&peri_clk {
+ compatible = "socionext,uniphier-pro5-peri-clock";
};
-&peri {
- compatible = "socionext,ph1-pro5-perictrl";
- clock-names = "uart", "fi2c";
- clocks = <&sysctrl 3>, <&sysctrl 4>;
+&peri_rst {
+ compatible = "socionext,uniphier-pro5-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-pro5-pinctrl";
};
-&sysctrl {
- compatible = "socionext,ph1-pro5-sysctrl";
+&sys_clk {
+ compatible = "socionext,uniphier-pro5-clock";
+};
+
+&sys_rst {
+ compatible = "socionext,uniphier-pro5-reset";
};
u-boot,dm-pre-reloc;
};
-&mio {
- u-boot,dm-pre-reloc;
-};
-
&emmc {
u-boot,dm-pre-reloc;
};
clock-frequency = <50000000>;
};
- uart_clk: uart_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <36864000>;
- };
-
iobus_clk: iobus_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart_clk>;
clock-frequency = <36864000>;
};
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart_clk>;
clock-frequency = <36864000>;
};
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- clocks = <&uart_clk>;
clock-frequency = <36864000>;
};
reg = <0x59801000 0x400>;
};
- mio: mioctrl@59810000 {
- compatible = "socionext,ph1-sld3-mioctrl";
+ mioctrl@59810000 {
+ compatible = "socionext,uniphier-mioctrl",
+ "simple-mfd", "syscon";
reg = <0x59810000 0x800>;
- #clock-cells = <1>;
- clock-names = "stdmac", "ehci";
- clocks = <&sysctrl 10>, <&sysctrl 18>;
+ u-boot,dm-pre-reloc;
+
+ mio_clk: clock {
+ compatible = "socionext,uniphier-sld3-mio-clock";
+ #clock-cells = <1>;
+ u-boot,dm-pre-reloc;
+ };
+
+ mio_rst: reset {
+ compatible = "socionext,uniphier-sld3-mio-reset";
+ #reset-cells = <1>;
+ };
};
emmc: sdhc@5a400000 {
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_emmc>;
pinctrl-1 = <&pinctrl_emmc_1v8>;
- clocks = <&mio 1>;
+ clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
- clocks = <&mio 0>;
+ clocks = <&mio_clk 0>;
bus-width = <4>;
};
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio 3>, <&mio 6>;
+ clocks = <&mio_clk 3>, <&mio_clk 6>;
};
usb1: usb@5a810100 {
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio 4>, <&mio 6>;
+ clocks = <&mio_clk 4>, <&mio_clk 6>;
};
usb2: usb@5a820100 {
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio 5>, <&mio 6>;
+ clocks = <&mio_clk 5>, <&mio_clk 6>;
};
usb3: usb@5a830100 {
interrupts = <0 83 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
- clocks = <&mio 7>, <&mio 6>;
+ clocks = <&mio_clk 7>, <&mio_clk 6>;
};
soc-glue@5f800000 {
reg = <0xf1830000 0x200>;
};
- sysctrl: sysctrl@f1840000 {
- compatible = "socionext,ph1-sld3-sysctrl";
+ sysctrl@f1840000 {
+ compatible = "socionext,uniphier-sysctrl",
+ "simple-mfd", "syscon";
reg = <0xf1840000 0x4000>;
- #clock-cells = <1>;
- clock-names = "ref";
- clocks = <&refclk>;
+
+ sys_clk: clock {
+ compatible = "socionext,uniphier-sld3-clock";
+ #clock-cells = <1>;
+ };
+
+ sys_rst: reset {
+ compatible = "socionext,uniphier-sld3-reset";
+ #reset-cells = <1>;
+ };
};
nand: nand@f8000000 {
clock-frequency = <50000000>;
};
- uart_clk: uart_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <80000000>;
- };
-
iobus_clk: iobus_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
- clocks = <&mio 0>;
+ clocks = <&mio_clk 0>;
bus-width = <4>;
};
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_emmc>;
pinctrl-1 = <&pinctrl_emmc_1v8>;
- clocks = <&mio 1>;
+ clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio 3>, <&mio 6>;
+ clocks = <&mio_clk 3>, <&mio_clk 6>;
};
usb1: usb@5a810100 {
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio 4>, <&mio 6>;
+ clocks = <&mio_clk 4>, <&mio_clk 6>;
};
usb2: usb@5a820100 {
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio 5>, <&mio 6>;
+ clocks = <&mio_clk 5>, <&mio_clk 6>;
};
aidet@61830000 {
clock-frequency = <80000000>;
};
-&mio {
- compatible = "socionext,ph1-sld8-mioctrl";
- clock-names = "stdmac", "ehci";
- clocks = <&sysctrl 10>, <&sysctrl 18>;
+&mio_clk {
+ compatible = "socionext,uniphier-sld8-mio-clock";
+};
+
+&mio_rst {
+ compatible = "socionext,uniphier-sld8-mio-reset";
+};
+
+&peri_clk {
+ compatible = "socionext,uniphier-sld8-peri-clock";
};
-&peri {
- compatible = "socionext,ph1-sld8-perictrl";
- clock-names = "uart", "i2c";
- clocks = <&sysctrl 3>, <&sysctrl 4>;
+&peri_rst {
+ compatible = "socionext,uniphier-sld8-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-sld8-pinctrl";
};
-&sysctrl {
- compatible = "socionext,ph1-sld8-sysctrl";
+&sys_clk {
+ compatible = "socionext,uniphier-sld8-clock";
+};
+
+&sys_rst {
+ compatible = "socionext,uniphier-sld8-reset";
};
u-boot,dm-pre-reloc;
};
-&mio {
+&mio_clk {
u-boot,dm-pre-reloc;
};
u-boot,dm-pre-reloc;
};
-&mio {
+&mio_clk {
u-boot,dm-pre-reloc;
};
clock-frequency = <50000000>;
};
- uart_clk: uart_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <88900000>;
- };
-
i2c_clk: i2c_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
interrupts = <0 78 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
- clocks = <&mio 1>;
+ clocks = <&mio_clk 1>;
bus-width = <8>;
non-removable;
};
pinctrl-names = "default", "1.8v";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_1v8>;
- clocks = <&mio 0>;
+ clocks = <&mio_clk 0>;
bus-width = <4>;
};
clock-frequency = <88900000>;
};
-&mio {
- compatible = "socionext,proxstream2-mioctrl";
- clock-names = "stdmac";
- clocks = <&sysctrl 10>;
+&mio_clk {
+ compatible = "socionext,uniphier-pxs2-mio-clock";
+};
+
+&mio_rst {
+ compatible = "socionext,uniphier-pxs2-mio-reset";
+};
+
+&peri_clk {
+ compatible = "socionext,uniphier-pxs2-peri-clock";
};
-&peri {
- compatible = "socionext,proxstream2-perictrl";
- clock-names = "uart", "fi2c";
- clocks = <&sysctrl 3>, <&sysctrl 4>;
+&peri_rst {
+ compatible = "socionext,uniphier-pxs2-peri-reset";
};
&pinctrl {
compatible = "socionext,uniphier-pxs2-pinctrl";
};
-&sysctrl {
- compatible = "socionext,proxstream2-sysctrl";
+&sys_clk {
+ compatible = "socionext,uniphier-pxs2-clock";
+};
+
+&sys_rst {
+ compatible = "socionext,uniphier-pxs2-reset";
};