]> git.sur5r.net Git - u-boot/commitdiff
arm: remove lubbock board support
authorMasahiro Yamada <yamada.m@jp.panasonic.com>
Fri, 4 Apr 2014 06:25:11 +0000 (15:25 +0900)
committerTom Rini <trini@ti.com>
Fri, 18 Apr 2014 14:42:30 +0000 (10:42 -0400)
Enough time has passed since this board was moved to Orphan. Remove.

 - Remove board/lubbock/*
 - Remove include/configs/lubbock.h
 - Cleanup defined(CONFIG_LUBBOCK)
 - Move the entry from boards.cfg to doc/README.scrapyard

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
board/lubbock/Makefile [deleted file]
board/lubbock/flash.c [deleted file]
board/lubbock/lubbock.c [deleted file]
boards.cfg
doc/README.scrapyard
drivers/net/lan91c96.h
include/configs/lubbock.h [deleted file]

diff --git a/board/lubbock/Makefile b/board/lubbock/Makefile
deleted file mode 100644 (file)
index 8aa513a..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
-
-obj-y  := lubbock.o flash.o
diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c
deleted file mode 100644 (file)
index f6bb22c..0000000
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];   /* info for FLASH chips    */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH32
-#undef FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH               ushort
-#define FLASH_PORT_WIDTHV              vu_short
-#define SWAP(x)               __swab16(x)
-#else
-#define FLASH_PORT_WIDTH               ulong
-#define FLASH_PORT_WIDTHV              vu_long
-#define SWAP(x)               __swab32(x)
-#endif
-
-#define FPW       FLASH_PORT_WIDTH
-#define FPWV   FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-       int i;
-       ulong size = 0;
-
-       for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-               switch (i) {
-               case 0:
-                       flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
-                       flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-                       break;
-               case 1:
-                       flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
-                       flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
-                       break;
-               default:
-                       panic ("configured too many flash banks!\n");
-                       break;
-               }
-               size += flash_info[i].size;
-       }
-
-       /* Protect monitor and environment sectors
-        */
-       flash_protect ( FLAG_PROTECT_SET,
-                       CONFIG_SYS_FLASH_BASE,
-                       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-                       &flash_info[0] );
-
-       flash_protect ( FLAG_PROTECT_SET,
-                       CONFIG_ENV_ADDR,
-                       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
-
-       return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-       int i;
-
-       if (info->flash_id == FLASH_UNKNOWN) {
-               return;
-       }
-
-       if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-               for (i = 0; i < info->sector_count; i++) {
-                       info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
-                       info->protect[i] = 0;
-               }
-       }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
-       int i;
-
-       if (info->flash_id == FLASH_UNKNOWN) {
-               printf ("missing or unknown FLASH type\n");
-               return;
-       }
-
-       switch (info->flash_id & FLASH_VENDMASK) {
-       case FLASH_MAN_INTEL:
-               printf ("INTEL ");
-               break;
-       default:
-               printf ("Unknown Vendor ");
-               break;
-       }
-
-       switch (info->flash_id & FLASH_TYPEMASK) {
-       case FLASH_28F128J3A:
-               printf ("28F128J3A\n");
-               break;
-       default:
-               printf ("Unknown Chip Type\n");
-               break;
-       }
-
-       printf ("  Size: %ld MB in %d Sectors\n",
-                       info->size >> 20, info->sector_count);
-
-       printf ("  Sector Start Addresses:");
-       for (i = 0; i < info->sector_count; ++i) {
-               if ((i % 5) == 0)
-                       printf ("\n   ");
-               printf (" %08lX%s",
-                       info->start[i],
-                       info->protect[i] ? " (RO)" : "     ");
-       }
-       printf ("\n");
-       return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
-{
-       volatile FPW value;
-
-       /* Write auto select command: read Manufacturer ID */
-       addr[0x5555] = (FPW) 0x00AA00AA;
-       addr[0x2AAA] = (FPW) 0x00550055;
-       addr[0x5555] = (FPW) 0x00900090;
-
-       mb ();
-       value = addr[0];
-
-       switch (value) {
-
-       case (FPW) INTEL_MANUFACT:
-               info->flash_id = FLASH_MAN_INTEL;
-               break;
-
-       default:
-               info->flash_id = FLASH_UNKNOWN;
-               info->sector_count = 0;
-               info->size = 0;
-               addr[0] = (FPW) 0x00FF00FF;     /* restore read mode */
-               return (0);                     /* no or unknown flash  */
-       }
-
-       mb ();
-       value = addr[1];                        /* device ID        */
-
-       switch (value) {
-
-       case (FPW) INTEL_ID_28F128J3A:
-               info->flash_id += FLASH_28F128J3A;
-               info->sector_count = 128;
-               info->size = 0x02000000;
-               break;                          /* => 16 MB     */
-
-       default:
-               info->flash_id = FLASH_UNKNOWN;
-               break;
-       }
-
-       if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-               printf ("** ERROR: sector count %d > max (%d) **\n",
-                       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-               info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-       }
-
-       addr[0] = (FPW) 0x00FF00FF;             /* restore read mode */
-
-       return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-       int prot, sect;
-       ulong type, start;
-       int rcode = 0;
-
-       if ((s_first < 0) || (s_first > s_last)) {
-               if (info->flash_id == FLASH_UNKNOWN) {
-                       printf ("- missing\n");
-               } else {
-                       printf ("- no sectors to erase\n");
-               }
-               return 1;
-       }
-
-       type = (info->flash_id & FLASH_VENDMASK);
-       if ((type != FLASH_MAN_INTEL)) {
-               printf ("Can't erase unknown flash type %08lx - aborted\n",
-                       info->flash_id);
-               return 1;
-       }
-
-       prot = 0;
-       for (sect = s_first; sect <= s_last; ++sect) {
-               if (info->protect[sect]) {
-                       prot++;
-               }
-       }
-
-       if (prot) {
-               printf ("- Warning: %d protected sectors will not be erased!\n",
-                       prot);
-       } else {
-               printf ("\n");
-       }
-
-       /* Disable interrupts which might cause a timeout here */
-       disable_interrupts();
-
-       /* Start erase on unprotected sectors */
-       for (sect = s_first; sect <= s_last; sect++) {
-               if (info->protect[sect] == 0) { /* not protected */
-                       FPWV *addr = (FPWV *) (info->start[sect]);
-                       FPW status;
-
-                       printf ("Erasing sector %2d ... ", sect);
-
-                       /* arm simple, non interrupt dependent timer */
-                       start = get_timer(0);
-
-                       *addr = (FPW) 0x00500050;       /* clear status register */
-                       *addr = (FPW) 0x00200020;       /* erase setup */
-                       *addr = (FPW) 0x00D000D0;       /* erase confirm */
-
-                       while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-                               if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-                                       printf ("Timeout\n");
-                                       *addr = (FPW) 0x00B000B0;       /* suspend erase     */
-                                       *addr = (FPW) 0x00FF00FF;       /* reset to read mode */
-                                       rcode = 1;
-                                       break;
-                               }
-                       }
-
-                       *addr = 0x00500050;     /* clear status register cmd.   */
-                       *addr = 0x00FF00FF;     /* resest to read mode          */
-
-                       printf (" done\n");
-               }
-       }
-       return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-       ulong cp, wp;
-       FPW data;
-       int count, i, l, rc, port_width;
-
-       if (info->flash_id == FLASH_UNKNOWN) {
-               return 4;
-       }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
-       wp = (addr & ~1);
-       port_width = 2;
-#else
-       wp = (addr & ~3);
-       port_width = 4;
-#endif
-
-       /*
-        * handle unaligned start bytes
-        */
-       if ((l = addr - wp) != 0) {
-               data = 0;
-               for (i = 0, cp = wp; i < l; ++i, ++cp) {
-                       data = (data << 8) | (*(uchar *) cp);
-               }
-               for (; i < port_width && cnt > 0; ++i) {
-                       data = (data << 8) | *src++;
-                       --cnt;
-                       ++cp;
-               }
-               for (; cnt == 0 && i < port_width; ++i, ++cp) {
-                       data = (data << 8) | (*(uchar *) cp);
-               }
-
-               if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-                       return (rc);
-               }
-               wp += port_width;
-       }
-
-       /*
-        * handle word aligned part
-        */
-       count = 0;
-       while (cnt >= port_width) {
-               data = 0;
-               for (i = 0; i < port_width; ++i) {
-                       data = (data << 8) | *src++;
-               }
-               if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-                       return (rc);
-               }
-               wp += port_width;
-               cnt -= port_width;
-               if (count++ > 0x800) {
-                       spin_wheel ();
-                       count = 0;
-               }
-       }
-
-       if (cnt == 0) {
-               return (0);
-       }
-
-       /*
-        * handle unaligned tail bytes
-        */
-       data = 0;
-       for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-               data = (data << 8) | *src++;
-               --cnt;
-       }
-       for (; i < port_width; ++i, ++cp) {
-               data = (data << 8) | (*(uchar *) cp);
-       }
-
-       return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
-{
-       FPWV *addr = (FPWV *) dest;
-       ulong status;
-       ulong start;
-
-       /* Check if Flash is (sufficiently) erased */
-       if ((*addr & data) != data) {
-               printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
-               return (2);
-       }
-       /* Disable interrupts which might cause a timeout here */
-       disable_interrupts();
-
-       *addr = (FPW) 0x00400040;       /* write setup */
-       *addr = data;
-
-       /* arm simple, non interrupt dependent timer */
-       start = get_timer(0);
-
-       /* wait while polling the status register */
-       while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-                       *addr = (FPW) 0x00FF00FF;       /* restore read mode */
-                       return (1);
-               }
-       }
-
-       *addr = (FPW) 0x00FF00FF;       /* restore read mode */
-
-       return (0);
-}
-
-void inline spin_wheel (void)
-{
-       static int p = 0;
-       static char w[] = "\\/-";
-
-       printf ("\010%c", w[p]);
-       (++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c
deleted file mode 100644 (file)
index 0daff9a..0000000
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-mmc.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-       /* We have RAM, disable cache */
-       dcache_disable();
-       icache_disable();
-
-       /* arch number of Lubbock-Board */
-       gd->bd->bi_arch_number = MACH_TYPE_LUBBOCK;
-
-       /* adress of boot parameters */
-       gd->bd->bi_boot_params = 0xa0000100;
-
-       /* Configure GPIO6 and GPIO8 as OUT, AF1. */
-       setbits_le32(GPDR0, (1 << 6) | (1 << 8));
-       clrsetbits_le32(GAFR0_L, (3 << 12) | (3 << 16), (1 << 12) | (1 << 16));
-
-       return 0;
-}
-
-#ifdef CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
-       pxa_mmc_register(0);
-       return 0;
-}
-#endif
-
-int board_late_init(void)
-{
-       setenv("stdout", "serial");
-       setenv("stderr", "serial");
-       return 0;
-}
-
-int dram_init(void)
-{
-       pxa2xx_dram_init();
-       gd->ram_size = PHYS_SDRAM_1_SIZE;
-       return 0;
-}
-
-void dram_init_banksize(void)
-{
-       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-       int rc = 0;
-#ifdef CONFIG_LAN91C96
-       rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
-       return rc;
-}
-#endif
index 6dd9e7513a03d4e329abf1f4543ee74f3d73ab9a..c83aff3b141938a2c5f5e744af742414f03c0c1b 100644 (file)
@@ -1241,4 +1241,3 @@ Orphan  powerpc     ppc4xx         -           sandburst       metrobox
 # The following were move to "Orphan" in September, 2013
 Orphan  arm         arm1136        mx31        -               imx31_phycore       imx31_phycore_eet                    imx31_phycore:IMX31_PHYCORE_EET                                                                                                   (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 Orphan  arm         arm1136        mx31        freescale       -                   mx31ads                              -                                                                                                                                 (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-Orphan  arm         pxa            -           -               -                   lubbock                              -                                                                                                                                 (dead address) Kyle Harris <kharris@nexus-tech.net>
index 0e4d329ed18ed37f484f1f6902ea1ea816d4467c..15c39e767582de2d0372420b58ed898ae4a1c4c2 100644 (file)
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+lubbock          arm         pxa            -           2014-04-04  Kyle Harris <kharris@nexus-tech.net>
 MOUSSE           powerpc     mpc824x        -           2014-04-04
 rsdproto         powerpc     mpc8260        -           2014-04-04
 RPXsuper         powerpc     mpc8260        -           2014-04-04
index 2f0d640adec80a6754c7948accab8bfd1b25315b..3e914ce5ad5d56f9d47cbd609da820e4db03b29a 100644 (file)
@@ -58,13 +58,7 @@ typedef unsigned long int            dword;
 
 #ifdef CONFIG_CPU_PXA25X
 
-#ifdef CONFIG_LUBBOCK
-#define        SMC_IO_SHIFT    2
-#undef USE_32_BIT
-
-#else
 #define        SMC_IO_SHIFT    0
-#endif
 
 #define        SMCREG(edev, r) ((edev)->iobase+((r)<<SMC_IO_SHIFT))
 
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
deleted file mode 100644 (file)
index 4ffe165..0000000
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the LUBBOCK board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_CPU_PXA25X              1       /* This is an PXA250 CPU    */
-#define CONFIG_LUBBOCK         1       /* on an LUBBOCK Board      */
-#define CONFIG_LCD             1
-#ifdef CONFIG_LCD
-#define CONFIG_PXA_LCD
-#define CONFIG_SHARP_LM8V31
-#endif
-#define CONFIG_MMC
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_DOS_PARTITION
-#define        CONFIG_SYS_TEXT_BASE    0x0
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN      (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE 0x0C000000
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART         1       /* we use FFUART on LUBBOCK */
-#define CONFIG_CONS_INDEX      3
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE                115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FAT
-
-
-#define CONFIG_BOOTDELAY       3
-#define CONFIG_ETHADDR         08:00:3e:26:0a:5b
-#define CONFIG_NETMASK         255.255.0.0
-#define CONFIG_IPADDR          192.168.0.21
-#define CONFIG_SERVERIP                192.168.0.250
-#define CONFIG_BOOTCOMMAND     "bootm 80000"
-#define CONFIG_BOOTARGS                "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_TIMESTAMP
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE   230400          /* speed to run kgdb serial port */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER         1
-
-#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT              "$ "            /* Monitor Command Prompt */
-#else
-#endif
-#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
-#define CONFIG_SYS_DEVICE_NULLDEV      1
-
-#define CONFIG_SYS_MEMTEST_START       0xa0400000      /* memtest works on     */
-#define CONFIG_SYS_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
-
-#define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
-
-#define CONFIG_SYS_CPUSPEED            0x161           /* set core clock to 400/200/100 MHz */
-
-#ifdef CONFIG_MMC
-#define        CONFIG_GENERIC_MMC
-#define        CONFIG_PXA_MMC_GENERIC
-#define CONFIG_CMD_MMC
-#define CONFIG_SYS_MMC_BASE            0xF0000000
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS   4          /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1           0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE      0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2           0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE      0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3           0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE      0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4           0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE      0x00000000 /* 0 MB */
-
-#define PHYS_FLASH_1           0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2           0x04000000 /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE                0x02000000 /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE   0x02000000 /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE   0x00040000 /* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_DRAM_BASE           0xa0000000
-#define CONFIG_SYS_DRAM_SIZE           0x04000000
-
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define        CONFIG_SYS_INIT_SP_ADDR         0xfffff800
-
-#define FPGA_REGS_BASE_PHYSICAL 0x08000000
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPSR0_VAL           0x00008000
-#define CONFIG_SYS_GPSR1_VAL           0x00FC0382
-#define CONFIG_SYS_GPSR2_VAL           0x0001FFFF
-#define CONFIG_SYS_GPCR0_VAL           0x00000000
-#define CONFIG_SYS_GPCR1_VAL           0x00000000
-#define CONFIG_SYS_GPCR2_VAL           0x00000000
-#define CONFIG_SYS_GPDR0_VAL           0x0060A800
-#define CONFIG_SYS_GPDR1_VAL           0x00FF0382
-#define CONFIG_SYS_GPDR2_VAL           0x0001C000
-#define CONFIG_SYS_GAFR0_L_VAL         0x98400000
-#define CONFIG_SYS_GAFR0_U_VAL         0x00002950
-#define CONFIG_SYS_GAFR1_L_VAL         0x000A9558
-#define CONFIG_SYS_GAFR1_U_VAL         0x0005AAAA
-#define CONFIG_SYS_GAFR2_L_VAL         0xA0000000
-#define CONFIG_SYS_GAFR2_U_VAL         0x00000002
-
-#define CONFIG_SYS_PSSR_VAL            0x20
-
-#define        CONFIG_SYS_CCCR                 CCCR_L27|CCCR_M2|CCCR_N10
-#define        CONFIG_SYS_CKEN                 0x0
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL            0x23F223F2
-#define CONFIG_SYS_MSC1_VAL            0x3FF1A441
-#define CONFIG_SYS_MSC2_VAL            0x7FF97FF1
-#define CONFIG_SYS_MDCNFG_VAL          0x00001AC9
-#define CONFIG_SYS_MDREFR_VAL          0x00018018
-#define CONFIG_SYS_MDMRS_VAL           0x00000000
-
-#define        CONFIG_SYS_FLYCNFG_VAL          0x00000000
-#define        CONFIG_SYS_SXCNFG_VAL           0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL            0x00000000
-#define CONFIG_SYS_MCMEM0_VAL          0x00010504
-#define CONFIG_SYS_MCMEM1_VAL          0x00010504
-#define CONFIG_SYS_MCATT0_VAL          0x00010504
-#define CONFIG_SYS_MCATT1_VAL          0x00010504
-#define CONFIG_SYS_MCIO0_VAL           0x00004715
-#define CONFIG_SYS_MCIO1_VAL           0x00004715
-
-#define _LED                   0x08000010
-#define LED_BLANK              0x08000040
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT      128  /* max number of sectors on one chip    */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* NOTE: many default partitioning schemes assume the kernel starts at the
- * second sector, not an environment.  You have been warned!
- */
-#define        CONFIG_SYS_MONITOR_LEN          PHYS_FLASH_SECT_SIZE
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR                (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
-#define CONFIG_ENV_SECT_SIZE   PHYS_FLASH_SECT_SIZE
-#define CONFIG_ENV_SIZE                (PHYS_FLASH_SECT_SIZE / 16)
-
-
-/*
- * FPGA Offsets
- */
-#define WHOAMI_OFFSET          0x00
-#define HEXLED_OFFSET          0x10
-#define BLANKLED_OFFSET                0x40
-#define DISCRETELED_OFFSET     0x40
-#define CNFG_SWITCHES_OFFSET   0x50
-#define USER_SWITCHES_OFFSET   0x60
-#define MISC_WR_OFFSET         0x80
-#define MISC_RD_OFFSET         0x90
-#define INT_MASK_OFFSET                0xC0
-#define INT_CLEAR_OFFSET       0xD0
-#define GP_OFFSET              0x100
-
-#endif /* __CONFIG_H */