return ops->set_mode(dev, mode);
}
-int regulator_by_platname(const char *plat_name, struct udevice **devp)
+int regulator_get_by_platname(const char *plat_name, struct udevice **devp)
{
struct dm_regulator_uclass_platdata *uc_pdata;
struct udevice *dev;
+ int ret;
*devp = NULL;
- for (uclass_find_first_device(UCLASS_REGULATOR, &dev);
- dev;
- uclass_find_next_device(&dev)) {
+ for (ret = uclass_find_first_device(UCLASS_REGULATOR, &dev); dev;
+ ret = uclass_find_next_device(&dev)) {
+ if (ret)
+ continue;
+
uc_pdata = dev_get_uclass_platdata(dev);
if (!uc_pdata || strcmp(plat_name, uc_pdata->name))
continue;
return -ENODEV;
}
-int regulator_by_devname(const char *devname, struct udevice **devp)
+int regulator_get_by_devname(const char *devname, struct udevice **devp)
{
return uclass_get_device_by_name(UCLASS_REGULATOR, devname, devp);
}
-static int setting_failed(int ret, bool verbose, const char *fmt, ...)
+static int failed(int ret, bool verbose, const char *fmt, ...)
{
va_list args;
char buf[64];
return ret;
}
-int regulator_by_platname_autoset_and_enable(const char *platname,
- struct udevice **devp,
- bool verbose)
+int regulator_autoset(const char *platname,
+ struct udevice **devp,
+ bool verbose)
{
struct dm_regulator_uclass_platdata *uc_pdata;
struct udevice *dev;
- bool v = verbose;
int ret;
if (devp)
*devp = NULL;
- ret = regulator_by_platname(platname, &dev);
+ ret = regulator_get_by_platname(platname, &dev);
if (ret) {
error("Can get the regulator: %s!", platname);
return ret;
return -ENXIO;
}
- if (v)
+ if (!uc_pdata->always_on && !uc_pdata->boot_on)
+ goto retdev;
+
+ if (verbose)
printf("%s@%s: ", dev->name, uc_pdata->name);
/* Those values are optional (-ENODATA if unset) */
(uc_pdata->max_uV != -ENODATA) &&
(uc_pdata->min_uV == uc_pdata->max_uV)) {
ret = regulator_set_value(dev, uc_pdata->min_uV);
- if (setting_failed(ret, v, "set %d uV", uc_pdata->min_uV))
+ if (failed(ret, verbose, "set %d uV", uc_pdata->min_uV))
goto exit;
}
(uc_pdata->max_uA != -ENODATA) &&
(uc_pdata->min_uA == uc_pdata->max_uA)) {
ret = regulator_set_current(dev, uc_pdata->min_uA);
- if (setting_failed(ret, v, "; set %d uA", uc_pdata->min_uA))
+ if (failed(ret, verbose, "; set %d uA", uc_pdata->min_uA))
goto exit;
}
- if (!uc_pdata->always_on && !uc_pdata->boot_on)
- goto retdev;
-
ret = regulator_set_enable(dev, true);
- if (setting_failed(ret, v, "; enabling", uc_pdata->min_uA))
+ if (failed(ret, verbose, "; enabling", uc_pdata->min_uA))
goto exit;
retdev:
if (devp)
*devp = dev;
exit:
- if (v)
+ if (verbose)
printf("\n");
+
return ret;
}
-int regulator_by_platname_list_autoset_and_enable(const char *list_platname[],
- int list_entries,
- struct udevice *list_devp[],
- bool verbose)
+int regulator_list_autoset(const char *list_platname[],
+ struct udevice *list_devp[],
+ bool verbose)
{
struct udevice *dev;
- int i, ret, success = 0;
+ int error = 0, i = 0, ret;
- for (i = 0; i < list_entries; i++) {
+ while (list_platname[i]) {
ret = regulator_autoset(list_platname[i], &dev, verbose);
- if (!ret)
- success++;
+ if (ret & !error)
+ error = ret;
+
+ if (list_devp)
+ list_devp[i] = dev;
+
+ i++;
+ }
+
+ return error;
+}
+
+static bool regulator_name_is_unique(struct udevice *check_dev,
+ const char *check_name)
+{
+ struct dm_regulator_uclass_platdata *uc_pdata;
+ struct udevice *dev;
+ int check_len = strlen(check_name);
+ int ret;
+ int len;
- if (!list_devp)
+ for (ret = uclass_find_first_device(UCLASS_REGULATOR, &dev); dev;
+ ret = uclass_find_next_device(&dev)) {
+ if (ret || dev == check_dev)
continue;
- if (ret)
- list_devp[i] = NULL;
- else
- list_devp[i] = dev;
+ uc_pdata = dev_get_uclass_platdata(dev);
+ len = strlen(uc_pdata->name);
+ if (len != check_len)
+ continue;
+
+ if (!strcmp(uc_pdata->name, check_name))
+ return false;
}
- return (success != list_entries);
+ return true;
}
static int regulator_post_bind(struct udevice *dev)
struct dm_regulator_uclass_platdata *uc_pdata;
int offset = dev->of_offset;
const void *blob = gd->fdt_blob;
+ const char *property = "regulator-name";
uc_pdata = dev_get_uclass_platdata(dev);
if (!uc_pdata)
return -ENXIO;
/* Regulator's mandatory constraint */
- uc_pdata->name = fdt_getprop(blob, offset, "regulator-name", NULL);
+ uc_pdata->name = fdt_getprop(blob, offset, property, NULL);
if (!uc_pdata->name) {
debug("%s: dev: %s has no property 'regulator-name'\n",
__func__, dev->name);
- return -ENXIO;
+ return -EINVAL;
}
- return 0;
+ if (regulator_name_is_unique(dev, uc_pdata->name))
+ return 0;
+
+ error("\"%s\" of dev: \"%s\", has nonunique value: \"%s\"",
+ property, dev->name, uc_pdata->name);
+
+ return -EINVAL;
}
static int regulator_pre_probe(struct udevice *dev)
* regulator constraints, like in the example below:
*
* ldo1 {
- * regulator-name = "VDD_MMC_1.8V"; (mandatory for bind)
+ * regulator-name = "VDD_MMC_1.8V"; (must be unique for proper bind)
* regulator-min-microvolt = <1000000>; (optional)
* regulator-max-microvolt = <1000000>; (optional)
* regulator-min-microamp = <1000>; (optional)
* regulator-boot-on; (optional)
* };
*
- * Please take a notice, that for the proper operation at least name constraint
- * is needed, e.g. for call the device_by_platname(...).
+ * Note: For the proper operation, at least name constraint is needed, since
+ * it can be used when calling regulator_get_by_platname(). And the mandatory
+ * rule for this name is, that it must be globally unique for the single dts.
*
* Regulator bind:
* For each regulator device, the device_bind() should be called with passed
* device tree offset. This is required for this uclass's '.post_bind' method,
- * which do the scan on the device node, for the 'regulator-name' constraint.
+ * which does the scan on the device node, for the 'regulator-name' constraint.
* If the parent is not a PMIC device, and the child is not bind by function:
* 'pmic_bind_childs()', then it's recommended to bind the device by call to
* dm_scan_fdt_node() - this is usually done automatically for bus devices,
* as a post bind method.
+ *
+ * Regulator get:
* Having the device's name constraint, we can call regulator_by_platname(),
- * to find interesting regulator. Before return, the regulator is probed,
+ * to find the required regulator. Before return, the regulator is probed,
* and the rest of its constraints are put into the device's uclass platform
* data, by the uclass regulator '.pre_probe' method.
*
/**
* The 'get/set_mode()' function calls should operate on a driver-
- * specific mode definitions, which should be found in:
- * field 'mode' of struct mode_desc.
+ * specific mode id definitions, which should be found in:
+ * field 'id' of struct dm_regulator_mode.
*
* get/set_mode - get/set operation mode of the given output number
* @dev - regulator device
* @return id/0 for get/set on success or negative errno if fail.
* Note:
* The field 'id' of struct type 'dm_regulator_mode', should be always
- * positive number, since the negative is reserved for the error.
+ * a positive number, since the negative is reserved for the error.
*/
int (*get_mode)(struct udevice *dev);
int (*set_mode)(struct udevice *dev, int mode_id);
int regulator_set_enable(struct udevice *dev, bool enable);
/**
- * regulator_get_mode: get mode of a given device regulator
+ * regulator_get_mode: get active operation mode id of a given regulator
*
* @dev - pointer to the regulator device
- * @return - positive mode number on success or -errno val if fails
+ * @return - positive mode 'id' number on success or -errno val if fails
* Note:
- * The regulator driver should return one of defined, mode number rather, than
- * the raw register value. The struct type 'mode_desc' provides a field 'mode'
- * for this purpose and register_value for a raw register value.
+ * The device can provide an array of operating modes, which is type of struct
+ * dm_regulator_mode. Each mode has it's own 'id', which should be unique inside
+ * that array. By calling this function, the driver should return an active mode
+ * id of the given regulator device.
*/
int regulator_get_mode(struct udevice *dev);
/**
- * regulator_set_mode: set given regulator mode
+ * regulator_set_mode: set the given regulator's, active mode id
*
- * @dev - pointer to the regulator device
- * @mode - mode type (field 'mode' of struct mode_desc)
- * @return - 0 on success or -errno value if fails
+ * @dev - pointer to the regulator device
+ * @mode_id - mode id to set ('id' field of struct type dm_regulator_mode)
+ * @return - 0 on success or -errno value if fails
* Note:
- * The regulator driver should take one of defined, mode number rather
- * than a raw register value. The struct type 'regulator_mode_desc' has
- * a mode field for this purpose and register_value for a raw register value.
+ * The device can provide an array of operating modes, which is type of struct
+ * dm_regulator_mode. Each mode has it's own 'id', which should be unique inside
+ * that array. By calling this function, the driver should set the active mode
+ * of a given regulator to given by "mode_id" argument.
*/
-int regulator_set_mode(struct udevice *dev, int mode);
+int regulator_set_mode(struct udevice *dev, int mode_id);
/**
- * regulator_by_platname_autoset_and_enable: setup the regulator given by
- * its uclass's platform data '.name'. The setup depends on constraints found
- * in device's uclass's platform data (struct dm_regulator_uclass_platdata):
+ * regulator_autoset: setup the regulator given by its uclass's platform data
+ * name field. The setup depends on constraints found in device's uclass's
+ * platform data (struct dm_regulator_uclass_platdata):
+ * - Enable - will set - if any of: 'always_on' or 'boot_on' is set to true,
+ * or if both are unset, then the function returns
* - Voltage value - will set - if '.min_uV' and '.max_uV' values are equal
* - Current limit - will set - if '.min_uA' and '.max_uA' values are equal
- * - Enable - will set - if any of: '.always_on' or '.boot_on', is set to true
*
* The function returns on first encountered error.
*
* @platname - expected string for dm_regulator_uclass_platdata .name field
- * @devp - returned pointer to the regulator device - if non-NULL passed
- * @verbose - (true/false) print regulator setup info, or be quiet
+ * @devp - returned pointer to the regulator device - if non-NULL passed
+ * @verbose - (true/false) print regulator setup info, or be quiet
* @return: 0 on success or negative value of errno.
*
* The returned 'regulator' device can be used with:
* - regulator_get/set_*
- * For shorter call name, the below macro regulator_autoset() can be used.
*/
-int regulator_by_platname_autoset_and_enable(const char *platname,
- struct udevice **devp,
- bool verbose);
-
-#define regulator_autoset(platname, devp, verbose) \
- regulator_by_platname_autoset_and_enable(platname, devp, verbose)
+int regulator_autoset(const char *platname,
+ struct udevice **devp,
+ bool verbose);
/**
- * regulator_by_platname_list_autoset_and_enable: setup the regulators given by
- * list of its uclass's platform data '.name'. The setup depends on constraints
- * found in device's uclass's platform data. The function loops with calls to:
- * regulator_by_platname_autoset_and_enable() for each name of list.
+ * regulator_list_autoset: setup the regulators given by list of their uclass's
+ * platform data name field. The setup depends on constraints found in device's
+ * uclass's platform data. The function loops with calls to:
+ * regulator_autoset() for each name from the list.
*
* @list_platname - an array of expected strings for .name field of each
* regulator's uclass platdata
- * @list_entries - number of regulator's name list entries
* @list_devp - an array of returned pointers to the successfully setup
* regulator devices if non-NULL passed
* @verbose - (true/false) print each regulator setup info, or be quiet
- * @return 0 on successfully setup of all list entries or 1 otwerwise.
+ * @return 0 on successfully setup of all list entries, otherwise first error.
*
* The returned 'regulator' devices can be used with:
* - regulator_get/set_*
- * For shorter call name, the below macro regulator_list_autoset() can be used.
+ *
+ * Note: The list must ends with NULL entry, like in the "platname" list below:
+ * char *my_regulators[] = {
+ * "VCC_3.3V",
+ * "VCC_1.8V",
+ * NULL,
+ * };
*/
-int regulator_by_platname_list_autoset_and_enable(const char *list_platname[],
- int list_entries,
- struct udevice *list_devp[],
- bool verbose);
-
-#define regulator_list_autoset(namelist, entries, devlist, verbose) \
- regulator_by_platname_list_autoset_and_enable(namelist, entries, \
- devlist, verbose)
+int regulator_list_autoset(const char *list_platname[],
+ struct udevice *list_devp[],
+ bool verbose);
/**
- * regulator_by_devname: returns the pointer to the pmic regulator device.
- * Search by name, found in regulator device's name.
+ * regulator_get_by_devname: returns the pointer to the pmic regulator device.
+ * Search by name, found in regulator device's name.
*
* @devname - expected string for 'dev->name' of regulator device
* @devp - returned pointer to the regulator device
* @return 0 on success or negative value of errno.
*
- * The returned 'regulator' device can be used with:
+ * The returned 'regulator' device is probed and can be used with:
* - regulator_get/set_*
*/
-int regulator_by_devname(const char *devname, struct udevice **devp);
+int regulator_get_by_devname(const char *devname, struct udevice **devp);
/**
- * regulator_by_platname: returns the pointer to the pmic regulator device.
- * Search by name, found in regulator uclass platdata.
+ * regulator_get_by_platname: returns the pointer to the pmic regulator device.
+ * Search by name, found in regulator uclass platdata.
*
* @platname - expected string for uc_pdata->name of regulator uclass platdata
* @devp - returned pointer to the regulator device
* @return 0 on success or negative value of errno.
*
- * The returned 'regulator' device can be used with:
+ * The returned 'regulator' device is probed and can be used with:
* - regulator_get/set_*
*/
-int regulator_by_platname(const char *platname, struct udevice **devp);
+int regulator_get_by_platname(const char *platname, struct udevice **devp);
#endif /* _INCLUDE_REGULATOR_H_ */
projects / u-boot / commitdiff