dm: pci: Disable PCI compatibility functions by default

We eventually need to drop the compatibility functions for driver model. As
a first step, create a configuration option to enable them and hide them
when the option is disabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 8db07081ff26fe306aed58be2af6890273c042e0..fbfb204e6ec87f3e926e52ecd3e5bcf749cdfd1e 100644 (file)
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -7,6 +7,7 @@ config TEGRA_COMMON
        select DM_I2C
        select DM_KEYBOARD
        select DM_PCI
+       select DM_PCI_COMPAT
        select DM_SERIAL
        select DM_SPI
        select DM_SPI_FLASH

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 16ba4f438ceac67e9cae4fef7774576dea7c63e7..7e7cb612d7c2d6c9f19ebb57a085aa5451abb2aa 100644 (file)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -93,6 +93,9 @@ config SYS_X86_START16
        depends on X86_RESET_VECTOR
        default 0xfffff800
 
+config DM_PCI_COMPAT
+       default y       # Until we finish moving over to the new API
+
 config BOARD_ROMSIZE_KB_512
        bool
 config BOARD_ROMSIZE_KB_1024

diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index c4e1be3234cf9e0d7d2df17bd59c768a95840440..fb1b09fcf23e3f89038bb2c050608591e621ab08 100644 (file)
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -49,6 +49,7 @@ CONFIG_SPI_FLASH_SST=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_DM_ETH=y
 CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCI_SANDBOX=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index c219c19679bd7939b13464e131e2286a9c795721..26aa2b0930a03b911f97180d2ef6237dcc5627bb 100644 (file)
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -9,6 +9,15 @@ config DM_PCI
          available PCI devices, allows scanning of PCI buses and provides
          device configuration support.
 
+config DM_PCI_COMPAT
+       bool "Enable compatible functions for PCI"
+       depends on DM_PCI
+       help
+         Enable compatibility functions for PCI so that old code can be used
+         with CONFIG_DM_PCI enabled. This should be used as an interim
+         measure when porting a board to use driver model for PCI. Once the
+         board is fully supported, this option should be disabled.
+
 config PCI_SANDBOX
        bool "Sandbox PCI support"
        depends on SANDBOX && DM_PCI

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 1f8f86f80313b0cda70aba495b05495e88e2ab94..6b761b453d92e4ff3b2656ddc7fc9afad4bdac50 100644 (file)
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -6,7 +6,8 @@
 #
 
 ifneq ($(CONFIG_DM_PCI),)
-obj-$(CONFIG_PCI) += pci-uclass.o pci_compat.o
+obj-$(CONFIG_PCI) += pci-uclass.o
+obj-$(CONFIG_DM_PCI_COMPAT) += pci_compat.o
 obj-$(CONFIG_PCI_SANDBOX) += pci_sandbox.o
 obj-$(CONFIG_SANDBOX) += pci-emul-uclass.o
 obj-$(CONFIG_X86) += pci_x86.o

diff --git a/include/pci.h b/include/pci.h
index c4f657784be52bb6a6779502bc2206d549489ab5..2adca850b4f9dec777b3c9239afea4dd357fde58 100644 (file)
--- a/include/pci.h
+++ b/include/pci.h
@@ -656,6 +656,7 @@ extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose,
        pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags))
 
 /* For driver model these are defined in macros in pci_compat.c */
+#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT)
 extern int pci_hose_read_config_byte(struct pci_controller *hose,
                                     pci_dev_t dev, int where, u8 *val);
 extern int pci_hose_read_config_word(struct pci_controller *hose,
@@ -668,6 +669,7 @@ extern int pci_hose_write_config_word(struct pci_controller *hose,
                                      pci_dev_t dev, int where, u16 val);
 extern int pci_hose_write_config_dword(struct pci_controller *hose,
                                       pci_dev_t dev, int where, u32 val);
+#endif
 
 #ifndef CONFIG_DM_PCI
 extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val);
@@ -678,6 +680,13 @@ extern int pci_write_config_word(pci_dev_t dev, int where, u16 val);
 extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val);
 #endif
 
+void pciauto_region_init(struct pci_region *res);
+void pciauto_region_align(struct pci_region *res, pci_size_t size);
+void pciauto_config_init(struct pci_controller *hose);
+int pciauto_region_allocate(struct pci_region *res, pci_size_t size,
+                           pci_addr_t *bar);
+
+#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT)
 extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose,
                                               pci_dev_t dev, int where, u8 *val);
 extern int pci_hose_read_config_word_via_dword(struct pci_controller *hose,
@@ -696,9 +705,6 @@ extern int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev);
 extern int pci_hose_scan(struct pci_controller *hose);
 extern int pci_hose_scan_bus(struct pci_controller *hose, int bus);
 
-extern void pciauto_region_init(struct pci_region* res);
-extern void pciauto_region_align(struct pci_region *res, pci_size_t size);
-extern int pciauto_region_allocate(struct pci_region* res, pci_size_t size, pci_addr_t *bar);
 extern void pciauto_setup_device(struct pci_controller *hose,
                                 pci_dev_t dev, int bars_num,
                                 struct pci_region *mem,
@@ -708,7 +714,6 @@ extern void pciauto_prescan_setup_bridge(struct pci_controller *hose,
                                 pci_dev_t dev, int sub_bus);
 extern void pciauto_postscan_setup_bridge(struct pci_controller *hose,
                                 pci_dev_t dev, int sub_bus);
-extern void pciauto_config_init(struct pci_controller *hose);
 extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
 
 extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index);
@@ -739,6 +744,7 @@ extern void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev,
                                unsigned short device,
                                unsigned short class);
 #endif
+#endif /* !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) */
 
 const char * pci_class_str(u8 class);
 int pci_last_busno(void);
@@ -747,6 +753,7 @@ int pci_last_busno(void);
 extern void pci_mpc85xx_init (struct pci_controller *hose);
 #endif
 
+#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT)
 /**
  * pci_write_bar32() - Write the address of a BAR including control bits
  *
@@ -783,6 +790,7 @@ u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum);
  */
 pci_dev_t pci_hose_find_devices(struct pci_controller *hose, int busnum,
                                struct pci_device_id *ids, int *indexp);
+#endif /* !CONFIG_DM_PCI || CONFIG_DM_PCI_COMPAT */
 
 /* Access sizes for PCI reads and writes */
 enum pci_size_t {
@@ -1041,6 +1049,7 @@ int dm_pci_write_config32(struct udevice *dev, int offset, u32 value);
  */
 int pci_write_config32(pci_dev_t pcidev, int offset, u32 value);
 
+#ifdef CONFIG_DM_PCI_COMPAT
 /* Compatibility with old naming */
 static inline int pci_write_config_dword(pci_dev_t pcidev, int offset,
                                         u32 value)
@@ -1093,6 +1102,19 @@ static inline int pci_read_config_byte(pci_dev_t pcidev, int offset,
        return pci_read_config8(pcidev, offset, valuep);
 }
 
+#endif /* CONFIG_DM_PCI_COMPAT */
+
+/**
+ * dm_pciauto_config_device() - configure a device ready for use
+ *
+ * Space is allocated for each PCI base address register (BAR) so that the
+ * devices are mapped into memory and I/O space ready for use.
+ *
+ * @dev:       Device to configure
+ * @return 0 if OK, -ve on error
+ */
+int dm_pciauto_config_device(struct udevice *dev);
+
 /**
  * pci_conv_32_to_size() - convert a 32-bit read value to the given size
  *