imply HASH_VERIFY
imply LZMA
imply SCSI
+ imply CMD_SATA
config SH
bool "SuperH architecture"
bool "Advantech dms-ba16"
select BOARD_LATE_INIT
select MX6Q
+ imply CMD_SATA
config TARGET_APALIS_IMX6
bool "Toradex Apalis iMX6 board"
select DM
select DM_SERIAL
select DM_THERMAL
+ imply CMD_SATA
config TARGET_ARISTAINETOS
bool "aristainetos"
config TARGET_GW_VENTANA
bool "gw_ventana"
select SUPPORT_SPL
+ imply CMD_SATA
config TARGET_KOSAGI_NOVENA
bool "Kosagi Novena"
config TARGET_OT1200
bool "Bachmann OT1200"
select SUPPORT_SPL
+ imply CMD_SATA
config TARGET_PICO_IMX6UL
bool "PICO-IMX6UL-EMMC"
config MV78260
bool
select ARMADA_XP
+ imply CMD_SATA
config MV78460
bool
bool "Support theadorable Armada XP"
select BOARD_LATE_INIT if USB
select MV78260
+ imply CMD_SATA
config TARGET_CONTROLCENTERDC
bool "Support CONTROLCENTERDC"
config TARGET_MPC837XEMDS
bool "Support MPC837XEMDS"
select BOARD_EARLY_INIT_F
+ imply CMD_SATA
config TARGET_MPC837XERDB
bool "Support MPC837XERDB"
select PHYS_64BIT
select ARCH_P3041
select BOARD_LATE_INIT if CHAIN_OF_TRUST
+ imply CMD_SATA
config TARGET_P4080DS
bool "Support P4080DS"
select PHYS_64BIT
select ARCH_P4080
select BOARD_LATE_INIT if CHAIN_OF_TRUST
+ imply CMD_SATA
config TARGET_P5020DS
bool "Support P5020DS"
select PHYS_64BIT
select ARCH_P5020
select BOARD_LATE_INIT if CHAIN_OF_TRUST
+ imply CMD_SATA
config TARGET_P5040DS
bool "Support P5040DS"
select PHYS_64BIT
select ARCH_P5040
select BOARD_LATE_INIT if CHAIN_OF_TRUST
+ imply CMD_SATA
config TARGET_MPC8536DS
bool "Support MPC8536DS"
select ARCH_MPC8536
# Use DDR3 controller with DDR2 DIMMs on this board
select SYS_FSL_DDRC_GEN3
+ imply CMD_SATA
config TARGET_MPC8541CDS
bool "Support MPC8541CDS"
select SUPPORT_SPL
select SUPPORT_TPL
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_P1010RDB_PB
bool "Support P1010RDB_PB"
select SUPPORT_SPL
select SUPPORT_TPL
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_P1022DS
bool "Support P1022DS"
select ARCH_P1022
select SUPPORT_SPL
select SUPPORT_TPL
+ imply CMD_SATA
config TARGET_P1023RDB
bool "Support P1023RDB"
select SUPPORT_TPL
select ARCH_P1020
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_P1020RDB_PC
bool "Support P1020RDB-PC"
select SUPPORT_TPL
select ARCH_P1020
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_P1020RDB_PD
bool "Support P1020RDB-PD"
select SUPPORT_TPL
select ARCH_P1020
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_P1020UTM
bool "Support P1020UTM"
select SUPPORT_TPL
select ARCH_P1020
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_P1021RDB
bool "Support P1021RDB"
select SUPPORT_TPL
select ARCH_P1021
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_P1024RDB
bool "Support P1024RDB"
select SUPPORT_TPL
select ARCH_P1024
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_P1025RDB
bool "Support P1025RDB"
select SUPPORT_TPL
select ARCH_P1025
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_P2020RDB
bool "Support P2020RDB-PC"
select SUPPORT_TPL
select ARCH_P2020
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_P1_TWR
bool "Support p1_twr"
select ARCH_P2041
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_QEMU_PPCE500
bool "Support qemu-ppce500"
select SUPPORT_SPL
select PHYS_64BIT
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_T1023RDB
bool "Support T1023RDB"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select PHYS_64BIT
imply CMD_EEPROM
+ imply CMD_SATA
config TARGET_T1040RDB
bool "Support T1040RDB"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_T1040D4RDB
bool "Support T1040D4RDB"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_T1042RDB
bool "Support T1042RDB"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_T1042D4RDB
bool "Support T1042D4RDB"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_T1042RDB_PI
bool "Support T1042RDB_PI"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_T2080QDS
bool "Support T2080QDS"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_T2080RDB
bool "Support T2080RDB"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_T2081QDS
bool "Support T2081QDS"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_T4160RDB
bool "Support T4160RDB"
select BOARD_LATE_INIT if CHAIN_OF_TRUST
select SUPPORT_SPL
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_T4240RDB
bool "Support T4240RDB"
select ARCH_T4240
select SUPPORT_SPL
select PHYS_64BIT
+ imply CMD_SATA
config TARGET_CONTROLCENTERD
bool "Support controlcenterd"
config TARGET_UCP1020
bool "Support uCP1020"
select ARCH_P1020
+ imply CMD_SATA
config TARGET_CYRUS_P5020
bool "Support Varisys Cyrus P5020"
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
+ imply CMD_SATA
config ARCH_MPC8540
bool
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_IFC
imply CMD_EEPROM
+ imply CMD_SATA
config ARCH_P1011
bool
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
+ imply CMD_SATA
config ARCH_P1021
bool
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
+ imply CMD_SATA
config ARCH_P1022
bool
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
imply CMD_EEPROM
+ imply CMD_SATA
config ARCH_P1025
bool
select SYS_FSL_SEC_COMPAT_2
select SYS_PPC_E500_USE_DEBUG_TLB
select FSL_ELBC
+ imply CMD_SATA
config ARCH_P2020
bool
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select FSL_ELBC
+ imply CMD_SATA
config ARCH_P4080
bool
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_4
select FSL_ELBC
+ imply CMD_SATA
config ARCH_P5020
bool
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
select FSL_ELBC
+ imply CMD_SATA
config ARCH_P5040
bool
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
select FSL_ELBC
+ imply CMD_SATA
config ARCH_QEMU_E500
bool
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
select FSL_IFC
+ imply CMD_SATA
config ARCH_T1042
bool
select SYS_FSL_SEC_BE
select SYS_FSL_SEC_COMPAT_5
select FSL_IFC
+ imply CMD_SATA
config ARCH_T2080
bool
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
select FSL_IFC
+ imply CMD_SATA
config ARCH_T2081
bool
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
select FSL_IFC
+ imply CMD_SATA
config ARCH_T4240
bool
select SYS_FSL_SEC_COMPAT_4
select SYS_PPC64
select FSL_IFC
+ imply CMD_SATA
config BOOKE
bool
help
The 'fdtboot' command allows booting an image from a floppy disk.
+config CMD_SATA
+ bool "sata - Access SATA subsystem"
+ help
+ SATA (Serial Advanced Technology Attachment) is a serial bus
+ standard for connecting to hard drives and other storage devices.
+ This command provides information about attached devices and allows
+ reading, writing and other operations.
+
+ SATA replaces PATA (originally just ATA), which stands for Parallel AT
+ Attachment, where AT refers to an IBM AT (Advanced Technology)
+ computer released in 1984.
+
endmenu
CONFIG_HUSH_PARSER=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SATA=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_IDE=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SATA=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_IDE=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SATA=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_MMC=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SATA=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SATA=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SATA=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_SF=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BMP=y
CONFIG_CMD_SF=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BMP=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SATA=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MMC=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
+CONFIG_CMD_SATA=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_DM=y
#ifdef CONFIG_FSL_SATA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
/*
#define CONFIG_SUPPORT_VFAT
#endif
-#ifdef CONFIG_SATA_SIL3114
- #define CONFIG_CMD_SATA
-#endif
-
#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE)
#endif
#ifdef CONFIG_FSL_SATA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
/*
#ifdef CONFIG_FSL_SATA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
/*
#ifdef CONFIG_FSL_SATA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
-#define CONFIG_CMD_SATA
#define CONFIG_LBA48
#endif /* #ifdef CONFIG_FSL_SATA */
#ifdef CONFIG_FSL_SATA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
#ifdef CONFIG_MMC
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_PCIE3
-#define CONFIG_CMD_SATA
#define CONFIG_SATA_SIL
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_LIBATA
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
/*
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
/*
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
/*
#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
/*
#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
/*
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CMD_SATA
#define CONFIG_SATA_SIL
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_LIBATA
#define CONFIG_MXC_OCOTP
/* SATA Configs */
-#define CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_DWC_AHSATA_PORT_ID 0
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#define CONFIG_BOUNCE_BUFFER
-#ifdef CONFIG_MX6Q
-#define CONFIG_CMD_SATA
-#endif
-
/*
* SATA Configs
*/
#define CONFIG_IMX_HDMI
/* SATA */
-#define CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_DWC_AHSATA_PORT_ID 0
#define CONFIG_SYS_I2C_EEPROM_BUS 2
/* SATA */
-#define CONFIG_CMD_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_LIBATA
#define CONFIG_LBA48
*/
#define CONFIG_LIBATA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
#ifdef CONFIG_FMAN_ENET
*/
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SATA
/* I2C */
#define CONFIG_SYS_I2C
/*
* SATA Configs
*/
-#define CONFIG_CMD_SATA
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
*/
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_SATA
/*
* Memory configurations
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_CMD_SATA
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 2
-#ifdef CONFIG_MX6Q
-#define CONFIG_CMD_SATA
-#endif
-
/*
* SATA Configs
*/
/* U-Boot Commands */
#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SATA
/* U-Boot general configurations */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#ifdef CONFIG_MX6Q
-#define CONFIG_CMD_SATA
-#endif
-
/*
* SATA Configs
*/
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CMD_SATA
#define CONFIG_SATA_SIL
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_LIBATA
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CMD_SATA
#define CONFIG_SATA_SIL3114
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_LIBATA
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 8
#define CONFIG_SYS_SCSI_MAX_LUN 4
-#define CONFIG_CMD_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 2
#define CONFIG_SYSTEMACE
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
#endif
#ifdef CONFIG_FMAN_ENET
#endif
/* SATA */
-#define CONFIG_CMD_SATA
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
/*
* Commands configuration
*/
-#define CONFIG_CMD_SATA
/*
* The debugging version enables USB support via defconfig.
/* SATA Configs */
-#define CONFIG_CMD_SATA
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
/* SATA Configs */
-#define CONFIG_CMD_SATA
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
CONFIG_CMD_REGINFO
CONFIG_CMD_REISER
CONFIG_CMD_SANDBOX
-CONFIG_CMD_SATA
CONFIG_CMD_SAVES
CONFIG_CMD_SCSI
CONFIG_CMD_SDRAM