mx53ard: Move to booting zImage

Move to booting a zImage kernel by default to align with the other
i.MX boards.

While at it, adjust the fdt_addr so that we can boot a standard
mainline kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index fdb4134b132f11147337e7aa1c7e10151b3f1ecc..25a4630e1e03a8172d8ba8f27c21441dc2fa3b62 100644 (file)
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -31,6 +31,8 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MXC_GPIO
 
+#define CONFIG_CMD_BOOTZ
+
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR_AXI
 #define CONFIG_NAND_MXC
@@ -93,12 +95,12 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
-       "uimage=uImage\0" \
+       "uimage=zImage\0" \
        "console=ttymxc0\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
        "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-       "fdt_addr=0x71000000\0" \
+       "fdt_addr=0x78000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
@@ -130,16 +132,16 @@
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \
-                               "bootm ${loadaddr} - ${fdt_addr}; " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
                        "else " \
                                "if test ${boot_fdt} = try; then " \
-                                       "bootm; " \
+                                       "bootz; " \
                                "else " \
                                        "echo WARN: Cannot load the DT; " \
                                "fi; " \
                        "fi; " \
                "else " \
-                       "bootm; " \
+                       "bootz; " \
                "fi;\0" \
        "netargs=setenv bootargs console=${console},${baudrate} " \
                "root=/dev/nfs " \
@@ -154,16 +156,16 @@
                "${get_cmd} ${uimage}; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-                               "bootm ${loadaddr} - ${fdt_addr}; " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
                        "else " \
                                "if test ${boot_fdt} = try; then " \
-                                       "bootm; " \
+                                       "bootz; " \
                                "else " \
                                        "echo WARN: Cannot load the DT; " \
                                "fi; " \
                        "fi; " \
                "else " \
-                       "bootm; " \
+                       "bootz; " \
                "fi;\0"
 
 #define CONFIG_BOOTCOMMAND \