Prepare USB layer for ehci

Prepare USB layer for ehci support

Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>

diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 423a29f33e2d9c28b98fa841d1b078741c8a5bd6..c95f61bd5e1155fb2178aecd59d46965902e7b10 100644 (file)
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -310,7 +310,7 @@ void usb_show_tree_graph(struct usb_device *dev, char *pre)
        pre[index] = 0;
        printf(" %s (%s, %dmA)\n", usb_get_class_desc(
                                        dev->config.if_desc[0].bInterfaceClass),
-                                       dev->slow ? "1.5MBit/s" : "12MBit/s",
+                                       dev->speed ? "1.5MBit/s" : "12MBit/s",
                                        dev->config.MaxPower * 2);
        if (strlen(dev->mf) || strlen(dev->prod) || strlen(dev->serial))
                printf(" %s  %s %s %s\n", pre, dev->mf, dev->prod, dev->serial);

diff --git a/common/usb.c b/common/usb.c
index ee181528c8899617421c8d33deed35c6cf0cfc33..313845234f885c7f81426790ec0545527791cc8b 100644 (file)
--- a/common/usb.c
+++ b/common/usb.c
@@ -1136,7 +1136,7 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)
 
        /* Allocate a new device struct for it */
        usb = usb_alloc_new_device();
-       usb->slow = (portstatus & USB_PORT_STAT_LOW_SPEED) ? 1 : 0;
+       usb->speed = (portstatus & USB_PORT_STAT_LOW_SPEED) ? 1 : 0;
 
        dev->children[port] = usb;
        usb->parent = dev;

diff --git a/include/usb.h b/include/usb.h
index 510df95d628e887fc49eaf3b9c58367f254e43e0..cd6f37a197c1dc671dcf7c779a81ae416560987d 100644 (file)
--- a/include/usb.h
+++ b/include/usb.h
@@ -138,7 +138,7 @@ enum {
 
 struct usb_device {
        int     devnum;                 /* Device number on USB bus */
-       int     slow;                   /* Slow device? */
+       int     speed;                  /* full/low/high */
        char    mf[32];                 /* manufacturer */
        char    prod[32];               /* product */
        char    serial[32];             /* serial number */
@@ -171,6 +171,7 @@ struct usb_device {
        unsigned long status;
        int act_len;                    /* transfered bytes */
        int maxchild;                   /* Number of ports if hub */
+       int portnr;
        struct usb_device *parent;
        struct usb_device *children[USB_MAXCHILDREN];
 };
@@ -180,8 +181,9 @@ struct usb_device {
  */
 
 #if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
-       defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_SL811HS) || \
-       defined(CONFIG_USB_ISP116X_HCD) || defined(CONFIG_USB_R8A66597_HCD)
+       defined(CONFI_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
+       defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
+       defined(CONFIG_USB_R8A66597_HCD)
 
 int usb_lowlevel_init(void);
 int usb_lowlevel_stop(void);
@@ -279,7 +281,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
  *  - endpoint number (4 bits)
  *  - current Data0/1 state (1 bit)
  *  - direction (1 bit)
- *  - speed (1 bit)
+ *  - speed (2 bits)
  *  - max packet size (2 bits: 8, 16, 32 or 64)
  *  - pipe type (2 bits: control, interrupt, bulk, isochronous)
  *
@@ -296,7 +298,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
  *  - device:          bits 8-14
  *  - endpoint:                bits 15-18
  *  - Data0/1:         bit 19
- *  - speed:           bit 26          (0 = Full, 1 = Low Speed)
+ *  - speed:           bit 26          (0 = Full, 1 = Low Speed, 2 = High)
  *  - pipe type:       bits 30-31      (00 = isochronous, 01 = interrupt,
  *                                      10 = control, 11 = bulk)
  *
@@ -308,8 +310,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 /* Create various pipes... */
 #define create_pipe(dev,endpoint) \
                (((dev)->devnum << 8) | (endpoint << 15) | \
-               ((dev)->slow << 26) | (dev)->maxpacketsize)
-#define default_pipe(dev) ((dev)->slow << 26)
+               ((dev)->speed << 26) | (dev)->maxpacketsize)
+#define default_pipe(dev) ((dev)->speed << 26)
 
 #define usb_sndctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \
                                         create_pipe(dev, endpoint))
@@ -359,7 +361,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 #define usb_pipe_endpdev(pipe) (((pipe) >> 8) & 0x7ff)
 #define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf)
 #define usb_pipedata(pipe)     (((pipe) >> 19) & 1)
-#define usb_pipeslow(pipe)     (((pipe) >> 26) & 1)
+#define usb_pipespeed(pipe)    (((pipe) >> 26) & 3)
+#define usb_pipeslow(pipe)     (usb_pipespeed(pipe) == USB_SPEED_LOW)
 #define usb_pipetype(pipe)     (((pipe) >> 30) & 3)
 #define usb_pipeisoc(pipe)     (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
 #define usb_pipeint(pipe)      (usb_pipetype((pipe)) == PIPE_INTERRUPT)

diff --git a/include/usb_defs.h b/include/usb_defs.h
index 353019fc1660f228f09b48c0fb1be41cb886a98a..8032e5712524ee322842e3eebf16a438eb4d99a7 100644 (file)
--- a/include/usb_defs.h
+++ b/include/usb_defs.h
@@ -80,6 +80,12 @@
 #define USB_DIR_OUT           0
 #define USB_DIR_IN            0x80
 
+/* USB device speeds */
+#define USB_SPEED_FULL         0x0     /* 12Mbps */
+#define USB_SPEED_LOW          0x1     /* 1.5Mbps */
+#define USB_SPEED_HIGH         0x2     /* 480Mbps */
+#define USB_SPEED_RESERVED     0x3
+
 /* Descriptor types */
 #define USB_DT_DEVICE        0x01
 #define USB_DT_CONFIG        0x02
@@ -202,6 +208,7 @@
 #define USB_PORT_FEAT_RESET          4
 #define USB_PORT_FEAT_POWER          8
 #define USB_PORT_FEAT_LOWSPEED       9
+#define USB_PORT_FEAT_HIGHSPEED      10
 #define USB_PORT_FEAT_C_CONNECTION   16
 #define USB_PORT_FEAT_C_ENABLE       17
 #define USB_PORT_FEAT_C_SUSPEND      18
@@ -216,6 +223,9 @@
 #define USB_PORT_STAT_RESET         0x0010
 #define USB_PORT_STAT_POWER         0x0100
 #define USB_PORT_STAT_LOW_SPEED     0x0200
+#define USB_PORT_STAT_HIGH_SPEED    0x0400     /* support for EHCI */
+#define USB_PORT_STAT_SPEED    \
+       (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED)
 
 /* wPortChange bits */
 #define USB_PORT_STAT_C_CONNECTION  0x0001