ARM: imx: cm_fx6: env: support distro boot command

The current default environment of the cm_fx6 is not suitable for
booting modern distributions.

Instead of extending the custom environment, let's use the distro
boot command, which has been developed for precisely this use case.

If the distro boot command fails, fall back to the old behavior
(except for USB drives where the old behaviour is completely covered
by the distro boot command). That way it is still possible to create
"rescue SD cards" for old installations (e.g. if one messes up the
on-flash environment).

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
index bcf2b77190247c15f1b1901b46092d9e4bffff38..33e610ccb42d484383ebacf97a3ce71fe0a2bdfd 100644 (file)
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -12,9 +12,11 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
 # CONFIG_CMD_BMODE is not set
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-cm-fx6"
 CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
+CONFIG_BOOTCOMMAND="run distro_bootcmd; run legacy_bootcmd"
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
 CONFIG_SPL_I2C_SUPPORT=y

diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index f511bc221c3eab6c055e0979760bdeca44c8730f..2cd127bcc3f700c945a13afced340ecb90e27fda 100644 (file)
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -13,6 +13,10 @@
 
 #include "mx6_common.h"
 
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#endif
+
 /* Machine config */
 #define CONFIG_SYS_LITTLE_ENDIAN
 #define CONFIG_MACH_TYPE               4273
@@ -62,6 +66,7 @@
 #define CONFIG_ENV_SIZE                        (8 * 1024)
 #define CONFIG_ENV_OFFSET              (768 * 1024)
 
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
@@ -126,7 +131,6 @@
        "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
        "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
        "setupnandboot=setenv storagetype nand;\0" \
-       "setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
        "storagebootcmd=echo Booting from ${storagetype} ...;" \
                        "run ${storagetype}args; run doboot;\0" \
        "trybootk=if run loadkernel; then " \
@@ -141,29 +145,33 @@
                "run setboottypem;" \
                "run trybootk;" \
                "run setboottypez;" \
-               "run trybootk;\0"
-
-#define CONFIG_BOOTCOMMAND \
-       "run setupmmcboot;" \
-       "mmc dev ${storagedev};" \
-       "if mmc rescan; then " \
-               "run trybootsmz;" \
-       "fi;" \
-       "run setupusbboot;" \
-       "if usb start; then "\
-               "if run loadscript; then " \
-                       "run bootscript;" \
+               "run trybootk;\0" \
+       "legacy_bootcmd=" \
+               "run setupmmcboot;" \
+               "mmc dev ${storagedev};" \
+               "if mmc rescan; then " \
+                       "run trybootsmz;" \
                "fi;" \
-       "fi;" \
-       "run setupsataboot;" \
-       "if sata init; then " \
-               "run trybootsmz;" \
-       "fi;" \
-       "run setupnandboot;" \
-       "run nandboot;"
+               "run setupsataboot;" \
+               "if sata init; then " \
+                       "run trybootsmz;" \
+               "fi;" \
+               "run setupnandboot;" \
+               "run nandboot;\0" \
+       BOOTENV
 
 #define CONFIG_PREBOOT         "usb start;sf probe"
 
+#define BOOT_TARGET_DEVICES(func) \
+       func(USB, usb, 0) \
+       func(MMC, mmc, 2) \
+       func(SATA, sata, 0)
+
+#include <config_distro_bootcmd.h>
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS
+#endif
+
 /* SPI */
 #define CONFIG_SPI
 #define CONFIG_MXC_SPI