]> git.sur5r.net Git - u-boot/commitdiff
ARM: kirkwood: Add device-tree for guruplug
authorChris Packham <judge.packham@gmail.com>
Tue, 8 May 2018 10:34:14 +0000 (22:34 +1200)
committerStefan Roese <sr@denx.de>
Thu, 17 May 2018 15:35:25 +0000 (17:35 +0200)
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
arch/arm/dts/kirkwood-guruplug-server-plus.dts [new file with mode: 0644]
configs/guruplug_defconfig

diff --git a/arch/arm/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/dts/kirkwood-guruplug-server-plus.dts
new file mode 100644 (file)
index 0000000..ff1260e
--- /dev/null
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+       model = "Globalscale Technologies Guruplug Server Plus";
+       compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8 earlyprintk";
+               stdout-path = &uart0;
+       };
+
+       ocp@f1000000 {
+               pinctrl: pin-controller@10000 {
+                       pmx_led_health_r: pmx-led-health-r {
+                               marvell,pins = "mpp46";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_health_g: pmx-led-health-g {
+                               marvell,pins = "mpp47";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_wmode_r: pmx-led-wmode-r {
+                               marvell,pins = "mpp48";
+                               marvell,function = "gpio";
+                       };
+                       pmx_led_wmode_g: pmx-led-wmode-g {
+                               marvell,pins = "mpp49";
+                               marvell,function = "gpio";
+                       };
+               };
+               serial@12000 {
+                       status = "ok";
+               };
+
+               sata@80000 {
+                       status = "okay";
+                       nr-ports = <1>;
+               };
+
+               /* AzureWave AW-GH381 WiFi/BT */
+               mvsdio@90000 {
+                       status = "okay";
+                       non-removable;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
+                             &pmx_led_wmode_r &pmx_led_wmode_g >;
+               pinctrl-names = "default";
+
+               health-r {
+                       label = "guruplug:red:health";
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+               };
+               health-g {
+                       label = "guruplug:green:health";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+               };
+               wmode-r {
+                       label = "guruplug:red:wmode";
+                       gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+               };
+               wmode-g {
+                       label = "guruplug:green:wmode";
+                       gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&nand {
+       status = "okay";
+
+       partition@0 {
+               label = "u-boot";
+               reg = <0x00000000 0x00100000>;
+               read-only;
+       };
+
+       partition@100000 {
+               label = "uImage";
+               reg = <0x00100000 0x00400000>;
+       };
+
+       partition@500000 {
+               label = "data";
+               reg = <0x00500000 0x1fb00000>;
+       };
+};
+
+&mdio {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               /* Marvell 88E1121R */
+               compatible = "ethernet-phy-id0141.0cb0",
+                            "ethernet-phy-ieee802.3-c22";
+               reg = <0>;
+       };
+
+       ethphy1: ethernet-phy@1 {
+               /* Marvell 88E1121R */
+               compatible = "ethernet-phy-id0141.0cb0",
+                            "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&eth0 {
+       status = "okay";
+       ethernet0-port@0 {
+               phy-handle = <&ethphy0>;
+               phy-connection-type = "rgmii-id";
+       };
+};
+
+&eth1 {
+       status = "okay";
+       ethernet1-port@0 {
+               phy-handle = <&ethphy1>;
+               phy-connection-type = "rgmii-id";
+       };
+};
index 5389cdd07e3c3d4f89a0150cb7c29cedf060a6b6..da3895d4db9a2f3757c0d57d2989bc4658140fce 100644 (file)
@@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
 CONFIG_SYS_TEXT_BASE=0x600000
 CONFIG_TARGET_GURUPLUG=y
 CONFIG_IDENT_STRING="\nMarvell-GuruPlug"
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-guruplug-server-plus"
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
@@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896K(uboot),128K(uboot_env),-@1M(root)"
 CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_MVSATA_IDE=y
 # CONFIG_MMC is not set
@@ -34,4 +36,3 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_LZMA=y
-CONFIG_OF_LIBFDT=y