S: Maintained
T: git git://git.denx.de/u-boot-uniphier.git
F: arch/arm/mach-uniphier/
-F: configs/ph1_*_defconfig
+F: configs/uniphier_*_defconfig
N: uniphier
ARM ZYNQ
VERSION = 2016
PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME =
# *DOCUMENTATION*
reg = < 0xe0040000 0x100 >;
interrupts = < 8 >;
};
+
+ ohci@0xe0060000 {
+ compatible = "generic-ohci";
+ reg = < 0xe0060000 0x100 >;
+ interrupts = < 8 >;
+ };
};
bool "Support sunxi (Allwinner) SoCs"
select CMD_USB
select DM
- select DM_GPIO
select DM_ETH
+ select DM_GPIO
+ select DM_KEYBOARD
select DM_SERIAL
select DM_USB
select OF_CONTROL
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a10s-wobo-i5.dtb \
sun5i-a13-ampe-a76.dtb \
+ sun5i-a13-empire-electronix-d709.dtb \
sun5i-a13-hsg-h702.dtb \
sun5i-a13-inet-86vs.dtb \
sun5i-a13-inet-98v-rev2.dtb \
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Empire Electronix D709 tablet";
+ compatible = "empire-electronix,d709", "allwinner,sun5i-a13";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <8>;
+ /* TODO: backlight uses axp gpio1 as enable pin */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+
+ mmccard: mmccard@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PG2";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins>;
+ status = "okay";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_usb0_vbus {
+ gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb0_vbus_pin_a {
+ allwinner,pins = "PG12";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_ldo3>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source commonly used by UniPhier ARM SoCs
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+ X11
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ interrupts = <0 33 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart_clk>;
+ };
+
+ serial1: serial@54006900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ interrupts = <0 35 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart_clk>;
+ };
+
+ serial2: serial@54006a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ interrupts = <0 37 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ clocks = <&uart_clk>;
+ };
+
+ serial3: serial@54006b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ interrupts = <0 177 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ clocks = <&uart_clk>;
+ };
+
+ system-bus-controller@58c00000 {
+ compatible = "socionext,uniphier-system-bus-controller";
+ reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ };
+
+ pinctrl: pinctrl@5f801000 {
+ /* specify compatible in each SoC DTSI */
+ reg = <0x5f801000 0xe00>;
+ };
+
+ nand: nand@68000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
+ };
+};
+
+/include/ "uniphier-pinctrl.dtsi"
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &serial0;
+ stdout-path = "serial0:115200n8";
};
aliases {
* SPDX-License-Identifier: GPL-2.0+ X11
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-ld4";
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
};
clock-frequency = <100000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
-
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- clock-frequency = <36864000>;
- };
-
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- clock-frequency = <36864000>;
- };
-
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- clock-frequency = <36864000>;
- };
-
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 29 4>;
- clocks = <&uart_clk>;
- clock-frequency = <36864000>;
- };
-
- i2c0: i2c@58400000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58400000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58480000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58480000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(512 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
- /* chip-internal connection for DMD */
- i2c2: i2c@58500000 {
- compatible = "socionext,uniphier-i2c";
- reg = <0x58500000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <400000>;
- };
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58400000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- i2c3: i2c@58580000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58580000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
+ i2c1: i2c@58480000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58480000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
- };
+ /* chip-internal connection for DMD */
+ i2c2: i2c@58500000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58500000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <400000>;
+ };
- usb0: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>;
- interrupts = <0 80 4>;
- };
+ i2c3: i2c@58580000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58580000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- usb1: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1>;
- interrupts = <0 81 4>;
- };
+ usb0: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ interrupts = <0 80 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ };
- usb2: usb@5a820100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a820100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2>;
- interrupts = <0 82 4>;
- };
+ usb1: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ interrupts = <0 81 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ };
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-ld4-pinctrl",
- "syscon";
- reg = <0x5f801000 0xe00>;
- };
+ usb2: usb@5a820100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ interrupts = <0 82 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ };
+};
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x104>;
- clocks = <&arm_timer_clk>;
- };
+&serial0 {
+ clock-frequency = <36864000>;
+};
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x104>;
- clocks = <&arm_timer_clk>;
- };
+&serial1 {
+ clock-frequency = <36864000>;
+};
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+&serial2 {
+ clock-frequency = <36864000>;
+};
- nand: nand@68000000 {
- compatible = "denali,denali-nand-dt";
- reg = <0x68000000 0x20>, <0x68100000 0x1000>;
- reg-names = "nand_data", "denali_reg";
- };
- };
+&serial3 {
+ interrupts = <0 29 4>;
+ clock-frequency = <36864000>;
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,ph1-ld4-pinctrl", "syscon";
+};
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &serial0;
+ stdout-path = "serial0:115200n8";
};
aliases {
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &serial0;
+ stdout-path = "serial0:115200n8";
};
aliases {
* SPDX-License-Identifier: GPL-2.0+ X11
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-pro4";
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
};
clock-frequency = <50000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
-
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- clock-frequency = <73728000>;
- };
-
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- clock-frequency = <73728000>;
- };
-
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- clock-frequency = <73728000>;
- };
-
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 29 4>;
- clocks = <&uart_clk>;
- clock-frequency = <73728000>;
- };
-
- i2c0: i2c@58780000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58780000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58781000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58781000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(768 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
- i2c2: i2c@58782000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58782000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- i2c3: i2c@58783000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58783000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- /* i2c4 does not exist */
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- /* chip-internal connection for DMD */
- i2c5: i2c@58785000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58785000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 25 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- /* chip-internal connection for HDMI */
- i2c6: i2c@58786000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58786000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 26 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
+ /* i2c4 does not exist */
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
- };
+ /* chip-internal connection for DMD */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- usb2: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2>;
- interrupts = <0 80 4>;
- };
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- usb3: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb3>;
- interrupts = <0 81 4>;
- };
+ usb2: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ interrupts = <0 80 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ };
- usb0: usb@65a00000 {
- compatible = "socionext,uniphier-xhci", "generic-xhci";
- status = "disabled";
- reg = <0x65a00000 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>;
- interrupts = <0 134 4>;
- };
+ usb3: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ interrupts = <0 81 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ };
- usb1: usb@65c00000 {
- compatible = "socionext,uniphier-xhci", "generic-xhci";
- status = "disabled";
- reg = <0x65c00000 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1>;
- interrupts = <0 137 4>;
- };
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-xhci", "generic-xhci";
+ status = "disabled";
+ reg = <0x65a00000 0x100>;
+ interrupts = <0 134 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ };
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-pro4-pinctrl",
- "syscon";
- reg = <0x5f801000 0xe00>;
- };
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-xhci", "generic-xhci";
+ status = "disabled";
+ reg = <0x65c00000 0x100>;
+ interrupts = <0 137 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ };
+};
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x304>;
- clocks = <&arm_timer_clk>;
- };
+&serial0 {
+ clock-frequency = <73728000>;
+};
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x304>;
- clocks = <&arm_timer_clk>;
- };
+&serial1 {
+ clock-frequency = <73728000>;
+};
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+&serial2 {
+ clock-frequency = <73728000>;
+};
- nand: nand@68000000 {
- compatible = "denali,denali-nand-dt";
- reg = <0x68000000 0x20>, <0x68100000 0x1000>;
- reg-names = "nand_data", "denali_reg";
- };
- };
+&serial3 {
+ clock-frequency = <73728000>;
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,ph1-pro4-pinctrl", "syscon";
+};
};
chosen {
- bootargs = "console=ttyS1,115200";
- stdout-path = &serial1;
+ stdout-path = "serial1:115200n8";
};
aliases {
* SPDX-License-Identifier: GPL-2.0+ X11
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-pro5";
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
};
clock-frequency = <50000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
-
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- };
-
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- };
-
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- };
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>;
+ interrupts = <0 190 4>, <0 191 4>;
+ cache-unified;
+ cache-size = <(2 * 1024 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ next-level-cache = <&l3>;
+ };
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 177 4>;
- clocks = <&uart_clk>;
- };
+ l3: l3-cache@500c8000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(2 * 1024 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <256>;
+ cache-level = <3>;
+ };
- i2c0: i2c@58780000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58780000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- i2c1: i2c@58781000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58781000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- i2c2: i2c@58782000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58782000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- i2c3: i2c@58783000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58783000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- /* i2c4 does not exist */
-
- /* chip-internal connection for DMD */
- i2c5: i2c@58785000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58785000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 25 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
+ /* i2c4 does not exist */
- /* chip-internal connection for HDMI */
- i2c6: i2c@58786000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58786000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 26 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
+ /* chip-internal connection for DMD */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
- };
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-pro5-pinctrl", "syscon";
- reg = <0x5f801000 0xe00>;
- };
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-xhci", "generic-xhci";
+ status = "disabled";
+ reg = <0x65a00000 0x100>;
+ interrupts = <0 134 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ };
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x304>;
- clocks = <&arm_timer_clk>;
- };
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-xhci", "generic-xhci";
+ status = "disabled";
+ reg = <0x65c00000 0x100>;
+ interrupts = <0 137 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
+ };
+};
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x304>;
- clocks = <&arm_timer_clk>;
- };
+&serial0 {
+ clock-frequency = <73728000>;
+};
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+&serial1 {
+ clock-frequency = <73728000>;
+};
- usb0: usb@65a00000 {
- compatible = "socionext,uniphier-xhci", "generic-xhci";
- status = "disabled";
- reg = <0x65a00000 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>;
- interrupts = <0 134 4>;
- };
+&serial2 {
+ clock-frequency = <73728000>;
+};
- usb1: usb@65c00000 {
- compatible = "socionext,uniphier-xhci", "generic-xhci";
- status = "disabled";
- reg = <0x65c00000 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
- interrupts = <0 137 4>;
- };
- };
+&serial3 {
+ clock-frequency = <73728000>;
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,ph1-pro5-pinctrl", "syscon";
+};
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &serial0;
+ stdout-path = "serial0:115200n8";
};
aliases {
};
chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &serial0;
+ stdout-path = "serial0:115200n8";
};
aliases {
* SPDX-License-Identifier: GPL-2.0+ X11
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-sld8";
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
};
clock-frequency = <100000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
-
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- clock-frequency = <80000000>;
- };
-
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- clock-frequency = <80000000>;
- };
-
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- clock-frequency = <80000000>;
- };
-
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 29 4>;
- clocks = <&uart_clk>;
- clock-frequency = <80000000>;
- };
-
- i2c0: i2c@58400000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58400000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58480000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58480000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(256 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
- /* chip-internal connection for DMD */
- i2c2: i2c@58500000 {
- compatible = "socionext,uniphier-i2c";
- reg = <0x58500000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <400000>;
- };
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58400000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- i2c3: i2c@58580000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58580000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
+ i2c1: i2c@58480000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58480000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
- };
+ /* chip-internal connection for DMD */
+ i2c2: i2c@58500000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58500000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <400000>;
+ };
- usb0: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>;
- interrupts = <0 80 4>;
- };
+ i2c3: i2c@58580000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58580000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- usb1: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1>;
- interrupts = <0 81 4>;
- };
+ usb0: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ interrupts = <0 80 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ };
- usb2: usb@5a820100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a820100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2>;
- interrupts = <0 82 4>;
- };
+ usb1: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ interrupts = <0 81 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ };
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-sld8-pinctrl",
- "syscon";
- reg = <0x5f801000 0xe00>;
- };
+ usb2: usb@5a820100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ interrupts = <0 82 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ };
+};
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x104>;
- clocks = <&arm_timer_clk>;
- };
+&serial0 {
+ clock-frequency = <80000000>;
+};
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x104>;
- clocks = <&arm_timer_clk>;
- };
+&serial1 {
+ clock-frequency = <80000000>;
+};
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+&serial2 {
+ clock-frequency = <80000000>;
+};
- nand: nand@68000000 {
- compatible = "denali,denali-nand-dt";
- reg = <0x68000000 0x20>, <0x68100000 0x1000>;
- reg-names = "nand_data", "denali_reg";
- };
- };
+&serial3 {
+ interrupts = <0 29 4>;
+ clock-frequency = <80000000>;
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,ph1-sld8-pinctrl", "syscon";
+};
*/
&pinctrl {
+ pinctrl_emmc: emmc_grp {
+ groups = "emmc", "emmc_dat8";
+ function = "emmc";
+ };
+
pinctrl_i2c0: i2c0_grp {
groups = "i2c0";
function = "i2c0";
function = "i2c3";
};
+ pinctrl_sd: sd_grp {
+ groups = "sd";
+ function = "sd";
+ };
+
+ pinctrl_sd1: sd1_grp {
+ groups = "sd1";
+ function = "sd1";
+ };
+
pinctrl_uart0: uart0_grp {
groups = "uart0";
function = "uart0";
};
chosen {
- bootargs = "console=ttyS2,115200";
- stdout-path = &serial2;
+ stdout-path = "serial2:115200n8";
};
aliases {
};
chosen {
- bootargs = "console=ttyS2,115200";
- stdout-path = &serial2;
+ stdout-path = "serial2:115200n8";
};
aliases {
* SPDX-License-Identifier: GPL-2.0+ X11
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,proxstream2";
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ next-level-cache = <&l2>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ next-level-cache = <&l2>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
+ next-level-cache = <&l2>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
+ next-level-cache = <&l2>;
};
};
clock-frequency = <50000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
-
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- clock-frequency = <88900000>;
- };
-
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- clock-frequency = <88900000>;
- };
-
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- clock-frequency = <88900000>;
- };
-
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 177 4>;
- clocks = <&uart_clk>;
- clock-frequency = <88900000>;
- };
-
- i2c0: i2c@58780000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58780000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+ cache-unified;
+ cache-size = <(1280 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
- i2c1: i2c@58781000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58781000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- i2c2: i2c@58782000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58782000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- i2c3: i2c@58783000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58783000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ interrupts = <0 43 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- /* chip-internal connection for DMD */
- i2c4: i2c@58784000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58784000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 45 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- /* chip-internal connection for STM */
- i2c5: i2c@58785000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58785000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 25 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
+ /* chip-internal connection for DMD */
+ i2c4: i2c@58784000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58784000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 45 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- /* chip-internal connection for HDMI */
- i2c6: i2c@58786000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58786000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 26 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
+ /* chip-internal connection for STM */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- system-bus-controller-misc@59800000 {
- compatible = "socionext,uniphier-system-bus-controller-misc",
- "syscon";
- reg = <0x59800000 0x2000>;
- };
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,proxstream2-pinctrl", "syscon";
- reg = <0x5f801000 0xe00>;
- };
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-xhci", "generic-xhci";
+ status = "disabled";
+ reg = <0x65a00000 0x100>;
+ interrupts = <0 134 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+ };
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0xf04>;
- clocks = <&arm_timer_clk>;
- };
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-xhci", "generic-xhci";
+ status = "disabled";
+ reg = <0x65c00000 0x100>;
+ interrupts = <0 137 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+ };
+};
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0xf04>;
- clocks = <&arm_timer_clk>;
- };
+&serial0 {
+ clock-frequency = <88900000>;
+};
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+&serial1 {
+ clock-frequency = <88900000>;
+};
- usb0: usb@65a00000 {
- compatible = "socionext,uniphier-xhci", "generic-xhci";
- status = "disabled";
- reg = <0x65a00000 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
- interrupts = <0 134 4>;
- };
+&serial2 {
+ clock-frequency = <88900000>;
+};
- usb1: usb@65c00000 {
- compatible = "socionext,uniphier-xhci", "generic-xhci";
- status = "disabled";
- reg = <0x65c00000 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
- interrupts = <0 137 4>;
- };
- };
+&serial3 {
+ clock-frequency = <88900000>;
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,proxstream2-pinctrl", "syscon";
+};
obj-y += lowlevel_init.o
obj-y += init_page_table.o
-obj-y += boards.o
-obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/ umc/ ddrphy/
+obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/ dram/
obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/
obj-$(CONFIG_DEBUG_LL) += debug_ll.o
endif
obj-y += timer.o
+obj-y += boards.o
obj-y += soc_info.o
obj-y += boot-mode/
#include <common.h>
#include <spl.h>
+#include <libfdt.h>
#include <nand.h>
#include <linux/io.h>
#include <../drivers/mtd/nand/denali.h>
#endif
}
+struct uniphier_fdt_file {
+ const char *compatible;
+ const char *file_name;
+};
+
+static const struct uniphier_fdt_file uniphier_fdt_files[] = {
+ { "socionext,ph1-ld4-ref", "uniphier-ph1-ld4-ref.dtb", },
+ { "socionext,ph1-ld6b-ref", "uniphier-ph1-ld6b-ref.dtb", },
+ { "socionext,ph1-ld10-ref", "uniphier-ph1-ld10-ref.dtb", },
+ { "socionext,ph1-pro4-ref", "uniphier-ph1-pro4-ref.dtb", },
+ { "socionext,ph1-pro5-4kbox", "uniphier-ph1-pro5-4kbox.dtb", },
+ { "socionext,ph1-sld3-ref", "uniphier-ph1-sld3-ref.dtb", },
+ { "socionext,ph1-sld8-ref", "uniphier-ph1-sld8-ref.dtb", },
+ { "socionext,proxstream2-gentil", "uniphier-proxstream2-gentil.dtb", },
+ { "socionext,proxstream2-vodka", "uniphier-proxstream2-vodka.dtb", },
+};
+
+static void uniphier_set_fdt_file(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ int i;
+
+ /* lookup DTB file name based on the compatible string */
+ for (i = 0; i < ARRAY_SIZE(uniphier_fdt_files); i++) {
+ if (!fdt_node_check_compatible(gd->fdt_blob, 0,
+ uniphier_fdt_files[i].compatible)) {
+ setenv("fdt_file", uniphier_fdt_files[i].file_name);
+ return;
+ }
+ }
+}
+
int board_late_init(void)
{
puts("MODE: ");
return -1;
}
+ uniphier_set_fdt_file();
+
return 0;
}
* SPDX-License-Identifier: GPL-2.0+
*/
+#include <common.h>
#include <libfdt.h>
#include <linux/kernel.h>
#include <mach/init.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
static const struct uniphier_board_data ph1_sld3_data = {
.dram_ch0_base = 0x80000000,
};
#endif
-#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \
- defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
static const struct uniphier_board_data proxstream2_data = {
+ .dram_ch0_base = 0x80000000,
+ .dram_ch0_size = 0x40000000,
+ .dram_ch0_width = 32,
+ .dram_ch1_base = 0xc0000000,
+ .dram_ch1_size = 0x20000000,
+ .dram_ch1_width = 32,
+ .dram_ch2_base = 0xe0000000,
+ .dram_ch2_size = 0x20000000,
+ .dram_ch2_width = 16,
+ .dram_freq = 2133,
+};
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+static const struct uniphier_board_data ph1_ld6b_data = {
.dram_ch0_base = 0x80000000,
.dram_ch0_size = 0x40000000,
.dram_ch0_width = 32,
{ "socionext,proxstream2", &proxstream2_data, },
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
- { "socionext,ph1-ld6b", &proxstream2_data, },
+ { "socionext,ph1-ld6b", &ph1_ld6b_data, },
#endif
};
-const struct uniphier_board_data *uniphier_get_board_param(const void *fdt)
+const struct uniphier_board_data *uniphier_get_board_param(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(uniphier_boards); i++) {
- if (!fdt_node_check_compatible(fdt, 0,
+ if (!fdt_node_check_compatible(gd->fdt_blob, 0,
uniphier_boards[i].compatible))
return uniphier_boards[i].param;
}
printf(FS "(+" PRINTF_FORMAT ")", readl(&dx->lcdlr[1]) & 0xff);
}
-void wbdl_dump(void)
+static void wbdl_dump(void)
{
printf("\n--- Write Bit Delay Line ---\n");
printf(" DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DM DQS (WDQD)\n");
printf(FS "(+" PRINTF_FORMAT ")", (readl(&dx->lcdlr[1]) >> 8) & 0xff);
}
-void rbdl_dump(void)
+static void rbdl_dump(void)
{
printf("\n--- Read Bit Delay Line ---\n");
printf(" DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DM (RDQSD)\n");
}
}
-void wld_dump(void)
+static void wld_dump(void)
{
printf("\n--- Write Leveling Delay ---\n");
printf(" Rank0 Rank1 Rank2 Rank3\n");
}
}
-void dqsgd_dump(void)
+static void dqsgd_dump(void)
{
printf("\n--- DQS Gating Delay ---\n");
printf(" Rank0 Rank1 Rank2 Rank3\n");
printf(FS PRINTF_FORMAT, (mdl >> (8 * i)) & 0xff);
}
-void mdl_dump(void)
+static void mdl_dump(void)
{
printf("\n--- Master Delay Line ---\n");
printf(" IPRD TPRD MDLD\n");
{ u32 __iomem *p = &phy->x; printf("%3d: %-10s: %p : %08x\n", \
p - (u32 *)phy, #x, p, readl(p)); }
-void reg_dump(void)
+static void reg_dump(void)
{
int ch, p;
struct ddrphy __iomem *phy;
case 0x2F:
puts("PH1-LD6b (MN2WS0320)");
break;
+ case 0x31:
+ puts("PH1-sLD11 ()");
+ break;
+ case 0x32:
+ puts("PH1-LD10 ()");
+ break;
default:
printf("Unknown Processor ID (0x%x)\n", revision);
return -1;
}
- if (model > 1)
- printf(" model %d", model);
+ printf(" model %d", model);
printf(" (rev. %d)\n", rev);
+++ /dev/null
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += ddrphy-training.o ddrphy-ph1-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += ddrphy-training.o ddrphy-ph1-pro4.o
-obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += ddrphy-training.o ddrphy-ph1-sld8.o
+++ /dev/null
-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/ddrphy-regs.h>
-
-int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
-{
- u32 tmp;
-
- writel(0x0300c473, &phy->pgcr[1]);
- if (freq == 1333) {
- writel(0x0a806844, &phy->ptr[0]);
- writel(0x208e0124, &phy->ptr[1]);
- } else {
- writel(0x0c807d04, &phy->ptr[0]);
- writel(0x2710015E, &phy->ptr[1]);
- }
- writel(0x00083DEF, &phy->ptr[2]);
- if (freq == 1333) {
- writel(0x0f051616, &phy->ptr[3]);
- writel(0x06ae08d6, &phy->ptr[4]);
- } else {
- writel(0x12061A80, &phy->ptr[3]);
- writel(0x08027100, &phy->ptr[4]);
- }
- writel(0xF004001A, &phy->dsgcr);
-
- /* change the value of the on-die pull-up/pull-down registors */
- tmp = readl(&phy->dxccr);
- tmp &= ~0x0ee0;
- tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
- writel(tmp, &phy->dxccr);
-
- writel(0x0000040B, &phy->dcr);
- if (freq == 1333) {
- writel(0x85589955, &phy->dtpr[0]);
- if (size == 1)
- writel(0x1a8253c0, &phy->dtpr[1]);
- else
- writel(0x1a8363c0, &phy->dtpr[1]);
- writel(0x5002c200, &phy->dtpr[2]);
- writel(0x00000b51, &phy->mr0);
- } else {
- writel(0x999cbb66, &phy->dtpr[0]);
- if (size == 1)
- writel(0x1a82dbc0, &phy->dtpr[1]);
- else
- writel(0x1a878400, &phy->dtpr[1]);
- writel(0xa00214f8, &phy->dtpr[2]);
- writel(0x00000d71, &phy->mr0);
- }
- writel(0x00000006, &phy->mr1);
- if (freq == 1333)
- writel(0x00000290, &phy->mr2);
- else
- writel(0x00000298, &phy->mr2);
-
- writel(0x00000800, &phy->mr3);
-
- while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
- ;
-
- writel(0x0300C473, &phy->pgcr[1]);
- writel(0x0000005D, &phy->zq[0].cr[1]);
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/ddrphy-regs.h>
-
-int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
-{
- u32 tmp;
-
- writel(0x0300c473, &phy->pgcr[1]);
- if (freq == 1333) {
- writel(0x0a806844, &phy->ptr[0]);
- writel(0x208e0124, &phy->ptr[1]);
- } else {
- writel(0x0c807d04, &phy->ptr[0]);
- writel(0x2710015E, &phy->ptr[1]);
- }
- writel(0x00083DEF, &phy->ptr[2]);
- if (freq == 1333) {
- writel(0x0f051616, &phy->ptr[3]);
- writel(0x06ae08d6, &phy->ptr[4]);
- } else {
- writel(0x12061A80, &phy->ptr[3]);
- writel(0x08027100, &phy->ptr[4]);
- }
- writel(0xF004001A, &phy->dsgcr);
-
- /* change the value of the on-die pull-up/pull-down registors */
- tmp = readl(&phy->dxccr);
- tmp &= ~0x0ee0;
- tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
- writel(tmp, &phy->dxccr);
-
- writel(0x0000040B, &phy->dcr);
- if (freq == 1333) {
- writel(0x85589955, &phy->dtpr[0]);
- if (size == 1)
- writel(0x1a8363c0, &phy->dtpr[1]);
- else
- writel(0x1a8363c0, &phy->dtpr[1]);
- writel(0x5002c200, &phy->dtpr[2]);
- writel(0x00000b51, &phy->mr0);
- } else {
- writel(0x999cbb66, &phy->dtpr[0]);
- if (size == 1)
- writel(0x1a878400, &phy->dtpr[1]);
- else
- writel(0x1a878400, &phy->dtpr[1]);
- writel(0xa00214f8, &phy->dtpr[2]);
- writel(0x00000d71, &phy->mr0);
- }
- writel(0x00000006, &phy->mr1);
- if (freq == 1333)
- writel(0x00000290, &phy->mr2);
- else
- writel(0x00000298, &phy->mr2);
-
- writel(0x00000000, &phy->mr3);
-
- while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
- ;
-
- writel(0x0300C473, &phy->pgcr[1]);
- writel(0x0000005D, &phy->zq[0].cr[1]);
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/ddrphy-regs.h>
-
-int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
-{
- u32 tmp;
-
- writel(0x0300c473, &phy->pgcr[1]);
- if (freq == 1333) {
- writel(0x0a806844, &phy->ptr[0]);
- writel(0x208e0124, &phy->ptr[1]);
- } else {
- writel(0x0c807d04, &phy->ptr[0]);
- writel(0x2710015E, &phy->ptr[1]);
- }
- writel(0x00083DEF, &phy->ptr[2]);
- if (freq == 1333) {
- writel(0x0f051616, &phy->ptr[3]);
- writel(0x06ae08d6, &phy->ptr[4]);
- } else {
- writel(0x12061A80, &phy->ptr[3]);
- writel(0x08027100, &phy->ptr[4]);
- }
- writel(0xF004001A, &phy->dsgcr);
-
- /* change the value of the on-die pull-up/pull-down registors */
- tmp = readl(&phy->dxccr);
- tmp &= ~0x0ee0;
- tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
- writel(tmp, &phy->dxccr);
-
- writel(0x0000040B, &phy->dcr);
- if (freq == 1333) {
- writel(0x85589955, &phy->dtpr[0]);
- if (size == 1)
- writel(0x1a8363c0, &phy->dtpr[1]);
- else
- writel(0x1a8363c0, &phy->dtpr[1]);
- writel(0x5002c200, &phy->dtpr[2]);
- writel(0x00000b51, &phy->mr0);
- } else {
- writel(0x999cbb66, &phy->dtpr[0]);
- if (size == 1)
- writel(0x1a878400, &phy->dtpr[1]);
- else
- writel(0x1a878400, &phy->dtpr[1]);
- writel(0xa00214f8, &phy->dtpr[2]);
- writel(0x00000d71, &phy->mr0);
- }
- writel(0x00000006, &phy->mr1);
- if (freq == 1333)
- writel(0x00000290, &phy->mr2);
- else
- writel(0x00000298, &phy->mr2);
-
-#ifdef CONFIG_DDR_STANDARD
- writel(0x00000000, &phy->mr3);
-#else
- writel(0x00000800, &phy->mr3);
-#endif
-
- while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
- ;
-
- writel(0x0300C473, &phy->pgcr[1]);
- writel(0x0000005D, &phy->zq[0].cr[1]);
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/ddrphy-regs.h>
-
-void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank)
-{
- int dx;
- u32 __iomem tmp, *p;
-
- for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) {
- p = &phy->dx[dx].gcr;
-
- tmp = readl(p);
- /* Specify the rank that should be write leveled */
- tmp &= ~DXGCR_WLRKEN_MASK;
- tmp |= (1 << (DXGCR_WLRKEN_SHIFT + rank)) & DXGCR_WLRKEN_MASK;
- writel(tmp, p);
- }
-
- p = &phy->dtcr;
-
- tmp = readl(p);
- /* Specify the rank used during data bit deskew and eye centering */
- tmp &= ~DTCR_DTRANK_MASK;
- tmp |= (rank << DTCR_DTRANK_SHIFT) & DTCR_DTRANK_MASK;
- /* Use Multi-Purpose Register for DQS gate training */
- tmp |= DTCR_DTMPR;
- /* Specify the rank enabled for data-training */
- tmp &= ~DTCR_RNKEN_MASK;
- tmp |= (1 << (DTCR_RNKEN_SHIFT + rank)) & DTCR_RNKEN_MASK;
- writel(tmp, p);
-}
-
-struct ddrphy_init_sequence {
- char *description;
- u32 init_flag;
- u32 done_flag;
- u32 err_flag;
-};
-
-static struct ddrphy_init_sequence init_sequence[] = {
- {
- "DRAM Initialization",
- PIR_DRAMRST | PIR_DRAMINIT,
- PGSR0_DIDONE,
- PGSR0_DIERR
- },
- {
- "Write Leveling",
- PIR_WL,
- PGSR0_WLDONE,
- PGSR0_WLERR
- },
- {
- "Read DQS Gate Training",
- PIR_QSGATE,
- PGSR0_QSGDONE,
- PGSR0_QSGERR
- },
- {
- "Write Leveling Adjustment",
- PIR_WLADJ,
- PGSR0_WLADONE,
- PGSR0_WLAERR
- },
- {
- "Read Bit Deskew",
- PIR_RDDSKW,
- PGSR0_RDDONE,
- PGSR0_RDERR
- },
- {
- "Write Bit Deskew",
- PIR_WRDSKW,
- PGSR0_WDDONE,
- PGSR0_WDERR
- },
- {
- "Read Eye Training",
- PIR_RDEYE,
- PGSR0_REDONE,
- PGSR0_REERR
- },
- {
- "Write Eye Training",
- PIR_WREYE,
- PGSR0_WEDONE,
- PGSR0_WEERR
- }
-};
-
-int ddrphy_training(struct ddrphy __iomem *phy)
-{
- int i;
- u32 pgsr0;
- u32 init_flag = PIR_INIT;
- u32 done_flag = PGSR0_IDONE;
- int timeout = 50000; /* 50 msec is long enough */
-#ifdef DISPLAY_ELAPSED_TIME
- ulong start = get_timer(0);
-#endif
-
- for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
- init_flag |= init_sequence[i].init_flag;
- done_flag |= init_sequence[i].done_flag;
- }
-
- writel(init_flag, &phy->pir);
-
- do {
- if (--timeout < 0) {
- printf("%s: error: timeout during DDR training\n",
- __func__);
- return -1;
- }
- udelay(1);
- pgsr0 = readl(&phy->pgsr[0]);
- } while ((pgsr0 & done_flag) != done_flag);
-
- for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
- if (pgsr0 & init_sequence[i].err_flag) {
- printf("%s: error: %s failed\n", __func__,
- init_sequence[i].description);
- return -1;
- }
- }
-
-#ifdef DISPLAY_ELAPSED_TIME
- printf("%s: info: elapsed time %ld msec\n", get_timer(start));
-#endif
-
- return 0;
-}
--- /dev/null
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += umc-ph1-ld4.o \
+ ddrphy-training.o ddrphy-ph1-ld4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += umc-ph1-pro4.o \
+ ddrphy-training.o ddrphy-ph1-pro4.o
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += umc-ph1-sld8.o \
+ ddrphy-training.o ddrphy-ph1-sld8.o
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <mach/ddrphy-regs.h>
+
+int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
+{
+ u32 tmp;
+
+ writel(0x0300c473, &phy->pgcr[1]);
+ if (freq == 1333) {
+ writel(0x0a806844, &phy->ptr[0]);
+ writel(0x208e0124, &phy->ptr[1]);
+ } else {
+ writel(0x0c807d04, &phy->ptr[0]);
+ writel(0x2710015E, &phy->ptr[1]);
+ }
+ writel(0x00083DEF, &phy->ptr[2]);
+ if (freq == 1333) {
+ writel(0x0f051616, &phy->ptr[3]);
+ writel(0x06ae08d6, &phy->ptr[4]);
+ } else {
+ writel(0x12061A80, &phy->ptr[3]);
+ writel(0x08027100, &phy->ptr[4]);
+ }
+ writel(0xF004001A, &phy->dsgcr);
+
+ /* change the value of the on-die pull-up/pull-down registors */
+ tmp = readl(&phy->dxccr);
+ tmp &= ~0x0ee0;
+ tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
+ writel(tmp, &phy->dxccr);
+
+ writel(0x0000040B, &phy->dcr);
+ if (freq == 1333) {
+ writel(0x85589955, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a8253c0, &phy->dtpr[1]);
+ else
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ writel(0x5002c200, &phy->dtpr[2]);
+ writel(0x00000b51, &phy->mr0);
+ } else {
+ writel(0x999cbb66, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a82dbc0, &phy->dtpr[1]);
+ else
+ writel(0x1a878400, &phy->dtpr[1]);
+ writel(0xa00214f8, &phy->dtpr[2]);
+ writel(0x00000d71, &phy->mr0);
+ }
+ writel(0x00000006, &phy->mr1);
+ if (freq == 1333)
+ writel(0x00000290, &phy->mr2);
+ else
+ writel(0x00000298, &phy->mr2);
+
+ writel(0x00000800, &phy->mr3);
+
+ while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
+ ;
+
+ writel(0x0300C473, &phy->pgcr[1]);
+ writel(0x0000005D, &phy->zq[0].cr[1]);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <mach/ddrphy-regs.h>
+
+int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
+{
+ u32 tmp;
+
+ writel(0x0300c473, &phy->pgcr[1]);
+ if (freq == 1333) {
+ writel(0x0a806844, &phy->ptr[0]);
+ writel(0x208e0124, &phy->ptr[1]);
+ } else {
+ writel(0x0c807d04, &phy->ptr[0]);
+ writel(0x2710015E, &phy->ptr[1]);
+ }
+ writel(0x00083DEF, &phy->ptr[2]);
+ if (freq == 1333) {
+ writel(0x0f051616, &phy->ptr[3]);
+ writel(0x06ae08d6, &phy->ptr[4]);
+ } else {
+ writel(0x12061A80, &phy->ptr[3]);
+ writel(0x08027100, &phy->ptr[4]);
+ }
+ writel(0xF004001A, &phy->dsgcr);
+
+ /* change the value of the on-die pull-up/pull-down registors */
+ tmp = readl(&phy->dxccr);
+ tmp &= ~0x0ee0;
+ tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
+ writel(tmp, &phy->dxccr);
+
+ writel(0x0000040B, &phy->dcr);
+ if (freq == 1333) {
+ writel(0x85589955, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ else
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ writel(0x5002c200, &phy->dtpr[2]);
+ writel(0x00000b51, &phy->mr0);
+ } else {
+ writel(0x999cbb66, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a878400, &phy->dtpr[1]);
+ else
+ writel(0x1a878400, &phy->dtpr[1]);
+ writel(0xa00214f8, &phy->dtpr[2]);
+ writel(0x00000d71, &phy->mr0);
+ }
+ writel(0x00000006, &phy->mr1);
+ if (freq == 1333)
+ writel(0x00000290, &phy->mr2);
+ else
+ writel(0x00000298, &phy->mr2);
+
+ writel(0x00000000, &phy->mr3);
+
+ while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
+ ;
+
+ writel(0x0300C473, &phy->pgcr[1]);
+ writel(0x0000005D, &phy->zq[0].cr[1]);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <mach/ddrphy-regs.h>
+
+int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size)
+{
+ u32 tmp;
+
+ writel(0x0300c473, &phy->pgcr[1]);
+ if (freq == 1333) {
+ writel(0x0a806844, &phy->ptr[0]);
+ writel(0x208e0124, &phy->ptr[1]);
+ } else {
+ writel(0x0c807d04, &phy->ptr[0]);
+ writel(0x2710015E, &phy->ptr[1]);
+ }
+ writel(0x00083DEF, &phy->ptr[2]);
+ if (freq == 1333) {
+ writel(0x0f051616, &phy->ptr[3]);
+ writel(0x06ae08d6, &phy->ptr[4]);
+ } else {
+ writel(0x12061A80, &phy->ptr[3]);
+ writel(0x08027100, &phy->ptr[4]);
+ }
+ writel(0xF004001A, &phy->dsgcr);
+
+ /* change the value of the on-die pull-up/pull-down registors */
+ tmp = readl(&phy->dxccr);
+ tmp &= ~0x0ee0;
+ tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM;
+ writel(tmp, &phy->dxccr);
+
+ writel(0x0000040B, &phy->dcr);
+ if (freq == 1333) {
+ writel(0x85589955, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ else
+ writel(0x1a8363c0, &phy->dtpr[1]);
+ writel(0x5002c200, &phy->dtpr[2]);
+ writel(0x00000b51, &phy->mr0);
+ } else {
+ writel(0x999cbb66, &phy->dtpr[0]);
+ if (size == 1)
+ writel(0x1a878400, &phy->dtpr[1]);
+ else
+ writel(0x1a878400, &phy->dtpr[1]);
+ writel(0xa00214f8, &phy->dtpr[2]);
+ writel(0x00000d71, &phy->mr0);
+ }
+ writel(0x00000006, &phy->mr1);
+ if (freq == 1333)
+ writel(0x00000290, &phy->mr2);
+ else
+ writel(0x00000298, &phy->mr2);
+
+#ifdef CONFIG_DDR_STANDARD
+ writel(0x00000000, &phy->mr3);
+#else
+ writel(0x00000800, &phy->mr3);
+#endif
+
+ while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE))
+ ;
+
+ writel(0x0300C473, &phy->pgcr[1]);
+ writel(0x0000005D, &phy->zq[0].cr[1]);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <mach/ddrphy-regs.h>
+
+void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank)
+{
+ int dx;
+ u32 __iomem tmp, *p;
+
+ for (dx = 0; dx < NR_DATX8_PER_DDRPHY; dx++) {
+ p = &phy->dx[dx].gcr;
+
+ tmp = readl(p);
+ /* Specify the rank that should be write leveled */
+ tmp &= ~DXGCR_WLRKEN_MASK;
+ tmp |= (1 << (DXGCR_WLRKEN_SHIFT + rank)) & DXGCR_WLRKEN_MASK;
+ writel(tmp, p);
+ }
+
+ p = &phy->dtcr;
+
+ tmp = readl(p);
+ /* Specify the rank used during data bit deskew and eye centering */
+ tmp &= ~DTCR_DTRANK_MASK;
+ tmp |= (rank << DTCR_DTRANK_SHIFT) & DTCR_DTRANK_MASK;
+ /* Use Multi-Purpose Register for DQS gate training */
+ tmp |= DTCR_DTMPR;
+ /* Specify the rank enabled for data-training */
+ tmp &= ~DTCR_RANKEN_MASK;
+ tmp |= (1 << (DTCR_RANKEN_SHIFT + rank)) & DTCR_RANKEN_MASK;
+ writel(tmp, p);
+}
+
+struct ddrphy_init_sequence {
+ char *description;
+ u32 init_flag;
+ u32 done_flag;
+ u32 err_flag;
+};
+
+static const struct ddrphy_init_sequence init_sequence[] = {
+ {
+ "DRAM Initialization",
+ PIR_DRAMRST | PIR_DRAMINIT,
+ PGSR0_DIDONE,
+ PGSR0_DIERR
+ },
+ {
+ "Write Leveling",
+ PIR_WL,
+ PGSR0_WLDONE,
+ PGSR0_WLERR
+ },
+ {
+ "Read DQS Gate Training",
+ PIR_QSGATE,
+ PGSR0_QSGDONE,
+ PGSR0_QSGERR
+ },
+ {
+ "Write Leveling Adjustment",
+ PIR_WLADJ,
+ PGSR0_WLADONE,
+ PGSR0_WLAERR
+ },
+ {
+ "Read Bit Deskew",
+ PIR_RDDSKW,
+ PGSR0_RDDONE,
+ PGSR0_RDERR
+ },
+ {
+ "Write Bit Deskew",
+ PIR_WRDSKW,
+ PGSR0_WDDONE,
+ PGSR0_WDERR
+ },
+ {
+ "Read Eye Training",
+ PIR_RDEYE,
+ PGSR0_REDONE,
+ PGSR0_REERR
+ },
+ {
+ "Write Eye Training",
+ PIR_WREYE,
+ PGSR0_WEDONE,
+ PGSR0_WEERR
+ }
+};
+
+int ddrphy_training(struct ddrphy __iomem *phy)
+{
+ int i;
+ u32 pgsr0;
+ u32 init_flag = PIR_INIT;
+ u32 done_flag = PGSR0_IDONE;
+ int timeout = 50000; /* 50 msec is long enough */
+#ifdef DISPLAY_ELAPSED_TIME
+ ulong start = get_timer(0);
+#endif
+
+ for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
+ init_flag |= init_sequence[i].init_flag;
+ done_flag |= init_sequence[i].done_flag;
+ }
+
+ writel(init_flag, &phy->pir);
+
+ do {
+ if (--timeout < 0) {
+ printf("%s: error: timeout during DDR training\n",
+ __func__);
+ return -ETIMEDOUT;
+ }
+ udelay(1);
+ pgsr0 = readl(&phy->pgsr[0]);
+ } while ((pgsr0 & done_flag) != done_flag);
+
+ for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
+ if (pgsr0 & init_sequence[i].err_flag) {
+ printf("%s: error: %s failed\n", __func__,
+ init_sequence[i].description);
+ return -EIO;
+ }
+ }
+
+#ifdef DISPLAY_ELAPSED_TIME
+ printf("%s: info: elapsed time %ld msec\n", get_timer(start));
+#endif
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/init.h>
+#include <mach/umc-regs.h>
+#include <mach/ddrphy-regs.h>
+
+static void umc_start_ssif(void __iomem *ssif_base)
+{
+ writel(0x00000000, ssif_base + 0x0000b004);
+ writel(0xffffffff, ssif_base + 0x0000c004);
+ writel(0x000fffcf, ssif_base + 0x0000c008);
+ writel(0x00000001, ssif_base + 0x0000b000);
+ writel(0x00000001, ssif_base + 0x0000c000);
+ writel(0x03010101, ssif_base + UMC_MDMCHSEL);
+ writel(0x03010100, ssif_base + UMC_DMDCHSEL);
+
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
+
+ writel(0x00000001, ssif_base + UMC_CPURST);
+ writel(0x00000001, ssif_base + UMC_IDSRST);
+ writel(0x00000001, ssif_base + UMC_IXMRST);
+ writel(0x00000001, ssif_base + UMC_MDMRST);
+ writel(0x00000001, ssif_base + UMC_MDDRST);
+ writel(0x00000001, ssif_base + UMC_SIORST);
+ writel(0x00000001, ssif_base + UMC_VIORST);
+ writel(0x00000001, ssif_base + UMC_FRCRST);
+ writel(0x00000001, ssif_base + UMC_RGLRST);
+ writel(0x00000001, ssif_base + UMC_AIORST);
+ writel(0x00000001, ssif_base + UMC_DMDRST);
+}
+
+static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
+ int size, int freq)
+{
+ if (freq == 1333) {
+ writel(0x45990b11, dramcont + UMC_CMDCTLA);
+ writel(0x16958924, dramcont + UMC_CMDCTLB);
+ writel(0x5101046A, dramcont + UMC_INITCTLA);
+
+ if (size == 1)
+ writel(0x27028B0A, dramcont + UMC_INITCTLB);
+ else if (size == 2)
+ writel(0x38028B0A, dramcont + UMC_INITCTLB);
+
+ writel(0x000FF0FF, dramcont + UMC_INITCTLC);
+ writel(0x00000b51, dramcont + UMC_DRMMR0);
+ } else if (freq == 1600) {
+ writel(0x36BB0F17, dramcont + UMC_CMDCTLA);
+ writel(0x18C6AA24, dramcont + UMC_CMDCTLB);
+ writel(0x5101387F, dramcont + UMC_INITCTLA);
+
+ if (size == 1)
+ writel(0x2F030D3F, dramcont + UMC_INITCTLB);
+ else if (size == 2)
+ writel(0x43030D3F, dramcont + UMC_INITCTLB);
+
+ writel(0x00FF00FF, dramcont + UMC_INITCTLC);
+ writel(0x00000d71, dramcont + UMC_DRMMR0);
+ }
+
+ writel(0x00000006, dramcont + UMC_DRMMR1);
+
+ if (freq == 1333)
+ writel(0x00000290, dramcont + UMC_DRMMR2);
+ else if (freq == 1600)
+ writel(0x00000298, dramcont + UMC_DRMMR2);
+
+ writel(0x00000800, dramcont + UMC_DRMMR3);
+
+ if (freq == 1333) {
+ if (size == 1)
+ writel(0x00240512, dramcont + UMC_SPCCTLA);
+ else if (size == 2)
+ writel(0x00350512, dramcont + UMC_SPCCTLA);
+
+ writel(0x00ff0006, dramcont + UMC_SPCCTLB);
+ writel(0x000a00ac, dramcont + UMC_RDATACTL_D0);
+ } else if (freq == 1600) {
+ if (size == 1)
+ writel(0x002B0617, dramcont + UMC_SPCCTLA);
+ else if (size == 2)
+ writel(0x003F0617, dramcont + UMC_SPCCTLA);
+
+ writel(0x00ff0008, dramcont + UMC_SPCCTLB);
+ writel(0x000c00ae, dramcont + UMC_RDATACTL_D0);
+ }
+
+ writel(0x04060806, dramcont + UMC_WDATACTL_D0);
+ writel(0x04a02000, dramcont + UMC_DATASET);
+ writel(0x00000000, ca_base + 0x2300);
+ writel(0x00400020, dramcont + UMC_DCCGCTL);
+ writel(0x00000003, dramcont + 0x7000);
+ writel(0x0000000f, dramcont + 0x8000);
+ writel(0x000000c3, dramcont + 0x8004);
+ writel(0x00000071, dramcont + 0x8008);
+ writel(0x0000003b, dramcont + UMC_DICGCTLA);
+ writel(0x020a0808, dramcont + UMC_DICGCTLB);
+ writel(0x00000004, dramcont + UMC_FLOWCTLG);
+ writel(0x80000201, ca_base + 0xc20);
+ writel(0x0801e01e, dramcont + UMC_FLOWCTLA);
+ writel(0x00200000, dramcont + UMC_FLOWCTLB);
+ writel(0x00004444, dramcont + UMC_FLOWCTLC);
+ writel(0x200a0a00, dramcont + UMC_SPCSETB);
+ writel(0x00000000, dramcont + UMC_SPCSETD);
+ writel(0x00000520, dramcont + UMC_DFICUPDCTLA);
+}
+
+static int umc_init_sub(int freq, int size_ch0, int size_ch1)
+{
+ void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
+ void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
+ void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
+ void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
+ void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
+ void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
+ void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
+
+ umc_dram_init_start(dramcont0);
+ umc_dram_init_start(dramcont1);
+ umc_dram_init_poll(dramcont0);
+ umc_dram_init_poll(dramcont1);
+
+ writel(0x00000101, dramcont0 + UMC_DIOCTLA);
+
+ ph1_ld4_ddrphy_init(phy0_0, freq, size_ch0);
+
+ ddrphy_prepare_training(phy0_0, 0);
+ ddrphy_training(phy0_0);
+
+ writel(0x00000101, dramcont1 + UMC_DIOCTLA);
+
+ ph1_ld4_ddrphy_init(phy1_0, freq, size_ch1);
+
+ ddrphy_prepare_training(phy1_0, 1);
+ ddrphy_training(phy1_0);
+
+ umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
+ umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
+
+ umc_start_ssif(ssif_base);
+
+ return 0;
+}
+
+int ph1_ld4_umc_init(const struct uniphier_board_data *bd)
+{
+ if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) &&
+ (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) &&
+ (bd->dram_freq == 1333 || bd->dram_freq == 1600) &&
+ bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) {
+ return umc_init_sub(bd->dram_freq,
+ bd->dram_ch0_size / SZ_128M,
+ bd->dram_ch1_size / SZ_128M);
+ } else {
+ pr_err("Unsupported DDR configuration\n");
+ return -EINVAL;
+ }
+}
--- /dev/null
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/init.h>
+#include <mach/umc-regs.h>
+#include <mach/ddrphy-regs.h>
+
+static void umc_start_ssif(void __iomem *ssif_base)
+{
+ writel(0x00000001, ssif_base + 0x0000b004);
+ writel(0xffffffff, ssif_base + 0x0000c004);
+ writel(0x07ffffff, ssif_base + 0x0000c008);
+ writel(0x00000001, ssif_base + 0x0000b000);
+ writel(0x00000001, ssif_base + 0x0000c000);
+
+ writel(0x03010100, ssif_base + UMC_HDMCHSEL);
+ writel(0x03010101, ssif_base + UMC_MDMCHSEL);
+ writel(0x03010100, ssif_base + UMC_DVCCHSEL);
+ writel(0x03010100, ssif_base + UMC_DMDCHSEL);
+
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
+ writel(0x00000000, ssif_base + 0x0000c044); /* DCGIV_SSIF_REG */
+
+ writel(0x00000001, ssif_base + UMC_CPURST);
+ writel(0x00000001, ssif_base + UMC_IDSRST);
+ writel(0x00000001, ssif_base + UMC_IXMRST);
+ writel(0x00000001, ssif_base + UMC_HDMRST);
+ writel(0x00000001, ssif_base + UMC_MDMRST);
+ writel(0x00000001, ssif_base + UMC_HDDRST);
+ writel(0x00000001, ssif_base + UMC_MDDRST);
+ writel(0x00000001, ssif_base + UMC_SIORST);
+ writel(0x00000001, ssif_base + UMC_GIORST);
+ writel(0x00000001, ssif_base + UMC_HD2RST);
+ writel(0x00000001, ssif_base + UMC_VIORST);
+ writel(0x00000001, ssif_base + UMC_DVCRST);
+ writel(0x00000001, ssif_base + UMC_RGLRST);
+ writel(0x00000001, ssif_base + UMC_VPERST);
+ writel(0x00000001, ssif_base + UMC_AIORST);
+ writel(0x00000001, ssif_base + UMC_DMDRST);
+}
+
+static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
+ int size, int freq)
+{
+ writel(0x66bb0f17, dramcont + UMC_CMDCTLA);
+ writel(0x18c6aa44, dramcont + UMC_CMDCTLB);
+ writel(0x5101387f, dramcont + UMC_INITCTLA);
+ writel(0x43030d3f, dramcont + UMC_INITCTLB);
+ writel(0x00ff00ff, dramcont + UMC_INITCTLC);
+ writel(0x00000d71, dramcont + UMC_DRMMR0);
+ writel(0x00000006, dramcont + UMC_DRMMR1);
+ writel(0x00000298, dramcont + UMC_DRMMR2);
+ writel(0x00000000, dramcont + UMC_DRMMR3);
+ writel(0x003f0617, dramcont + UMC_SPCCTLA);
+ writel(0x00ff0008, dramcont + UMC_SPCCTLB);
+ writel(0x000c00ae, dramcont + UMC_RDATACTL_D0);
+ writel(0x000c00ae, dramcont + UMC_RDATACTL_D1);
+ writel(0x04060802, dramcont + UMC_WDATACTL_D0);
+ writel(0x04060802, dramcont + UMC_WDATACTL_D1);
+ writel(0x04a02000, dramcont + UMC_DATASET);
+ writel(0x00000000, ca_base + 0x2300);
+ writel(0x00400020, dramcont + UMC_DCCGCTL);
+ writel(0x0000000f, dramcont + 0x7000);
+ writel(0x0000000f, dramcont + 0x8000);
+ writel(0x000000c3, dramcont + 0x8004);
+ writel(0x00000071, dramcont + 0x8008);
+ writel(0x00000004, dramcont + UMC_FLOWCTLG);
+ writel(0x00000000, dramcont + 0x0060);
+ writel(0x80000201, ca_base + 0xc20);
+ writel(0x0801e01e, dramcont + UMC_FLOWCTLA);
+ writel(0x00200000, dramcont + UMC_FLOWCTLB);
+ writel(0x00004444, dramcont + UMC_FLOWCTLC);
+ writel(0x200a0a00, dramcont + UMC_SPCSETB);
+ writel(0x00010000, dramcont + UMC_SPCSETD);
+ writel(0x80000020, dramcont + UMC_DFICUPDCTLA);
+}
+
+static int umc_init_sub(int freq, int size_ch0, int size_ch1)
+{
+ void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
+ void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
+ void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
+ void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
+ void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
+ void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
+ void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1);
+ void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
+ void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1);
+
+ umc_dram_init_start(dramcont0);
+ umc_dram_init_start(dramcont1);
+ umc_dram_init_poll(dramcont0);
+ umc_dram_init_poll(dramcont1);
+
+ writel(0x00000101, dramcont0 + UMC_DIOCTLA);
+
+ ph1_pro4_ddrphy_init(phy0_0, freq, size_ch0);
+
+ ddrphy_prepare_training(phy0_0, 0);
+ ddrphy_training(phy0_0);
+
+ writel(0x00000103, dramcont0 + UMC_DIOCTLA);
+
+ ph1_pro4_ddrphy_init(phy0_1, freq, size_ch0);
+
+ ddrphy_prepare_training(phy0_1, 1);
+ ddrphy_training(phy0_1);
+
+ writel(0x00000101, dramcont1 + UMC_DIOCTLA);
+
+ ph1_pro4_ddrphy_init(phy1_0, freq, size_ch1);
+
+ ddrphy_prepare_training(phy1_0, 0);
+ ddrphy_training(phy1_0);
+
+ writel(0x00000103, dramcont1 + UMC_DIOCTLA);
+
+ ph1_pro4_ddrphy_init(phy1_1, freq, size_ch1);
+
+ ddrphy_prepare_training(phy1_1, 1);
+ ddrphy_training(phy1_1);
+
+ umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
+ umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
+
+ umc_start_ssif(ssif_base);
+
+ return 0;
+}
+
+int ph1_pro4_umc_init(const struct uniphier_board_data *bd)
+{
+ if (((bd->dram_ch0_size == SZ_512M && bd->dram_ch0_width == 32) ||
+ (bd->dram_ch0_size == SZ_256M && bd->dram_ch0_width == 16)) &&
+ ((bd->dram_ch1_size == SZ_512M && bd->dram_ch1_width == 32) ||
+ (bd->dram_ch1_size == SZ_256M && bd->dram_ch1_width == 16)) &&
+ bd->dram_freq == 1600) {
+ return umc_init_sub(bd->dram_freq,
+ bd->dram_ch0_size / SZ_128M,
+ bd->dram_ch1_size / SZ_128M);
+ } else {
+ pr_err("Unsupported DDR configuration\n");
+ return -EINVAL;
+ }
+}
--- /dev/null
+/*
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/init.h>
+#include <mach/umc-regs.h>
+#include <mach/ddrphy-regs.h>
+
+static void umc_start_ssif(void __iomem *ssif_base)
+{
+ writel(0x00000000, ssif_base + 0x0000b004);
+ writel(0xffffffff, ssif_base + 0x0000c004);
+ writel(0x000fffcf, ssif_base + 0x0000c008);
+ writel(0x00000001, ssif_base + 0x0000b000);
+ writel(0x00000001, ssif_base + 0x0000c000);
+ writel(0x03010101, ssif_base + UMC_MDMCHSEL);
+ writel(0x03010100, ssif_base + UMC_DMDCHSEL);
+
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
+ writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
+
+ writel(0x00000001, ssif_base + UMC_CPURST);
+ writel(0x00000001, ssif_base + UMC_IDSRST);
+ writel(0x00000001, ssif_base + UMC_IXMRST);
+ writel(0x00000001, ssif_base + UMC_MDMRST);
+ writel(0x00000001, ssif_base + UMC_MDDRST);
+ writel(0x00000001, ssif_base + UMC_SIORST);
+ writel(0x00000001, ssif_base + UMC_VIORST);
+ writel(0x00000001, ssif_base + UMC_FRCRST);
+ writel(0x00000001, ssif_base + UMC_RGLRST);
+ writel(0x00000001, ssif_base + UMC_AIORST);
+ writel(0x00000001, ssif_base + UMC_DMDRST);
+}
+
+static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
+ int size, int freq)
+{
+#ifdef CONFIG_DDR_STANDARD
+ writel(0x55990b11, dramcont + UMC_CMDCTLA);
+ writel(0x16958944, dramcont + UMC_CMDCTLB);
+#else
+ writel(0x45990b11, dramcont + UMC_CMDCTLA);
+ writel(0x16958924, dramcont + UMC_CMDCTLB);
+#endif
+
+ writel(0x5101046A, dramcont + UMC_INITCTLA);
+
+ if (size == 1)
+ writel(0x27028B0A, dramcont + UMC_INITCTLB);
+ else if (size == 2)
+ writel(0x38028B0A, dramcont + UMC_INITCTLB);
+
+ writel(0x00FF00FF, dramcont + UMC_INITCTLC);
+ writel(0x00000b51, dramcont + UMC_DRMMR0);
+ writel(0x00000006, dramcont + UMC_DRMMR1);
+ writel(0x00000290, dramcont + UMC_DRMMR2);
+
+#ifdef CONFIG_DDR_STANDARD
+ writel(0x00000000, dramcont + UMC_DRMMR3);
+#else
+ writel(0x00000800, dramcont + UMC_DRMMR3);
+#endif
+
+ if (size == 1)
+ writel(0x00240512, dramcont + UMC_SPCCTLA);
+ else if (size == 2)
+ writel(0x00350512, dramcont + UMC_SPCCTLA);
+
+ writel(0x00ff0006, dramcont + UMC_SPCCTLB);
+ writel(0x000a00ac, dramcont + UMC_RDATACTL_D0);
+ writel(0x04060806, dramcont + UMC_WDATACTL_D0);
+ writel(0x04a02000, dramcont + UMC_DATASET);
+ writel(0x00000000, ca_base + 0x2300);
+ writel(0x00400020, dramcont + UMC_DCCGCTL);
+ writel(0x00000003, dramcont + 0x7000);
+ writel(0x0000004f, dramcont + 0x8000);
+ writel(0x000000c3, dramcont + 0x8004);
+ writel(0x00000077, dramcont + 0x8008);
+ writel(0x0000003b, dramcont + UMC_DICGCTLA);
+ writel(0x020a0808, dramcont + UMC_DICGCTLB);
+ writel(0x00000004, dramcont + UMC_FLOWCTLG);
+ writel(0x80000201, ca_base + 0xc20);
+ writel(0x0801e01e, dramcont + UMC_FLOWCTLA);
+ writel(0x00200000, dramcont + UMC_FLOWCTLB);
+ writel(0x00004444, dramcont + UMC_FLOWCTLC);
+ writel(0x200a0a00, dramcont + UMC_SPCSETB);
+ writel(0x00000000, dramcont + UMC_SPCSETD);
+ writel(0x00000520, dramcont + UMC_DFICUPDCTLA);
+}
+
+static int umc_init_sub(int freq, int size_ch0, int size_ch1)
+{
+ void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
+ void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
+ void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
+ void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
+ void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
+ void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
+ void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
+
+ umc_dram_init_start(dramcont0);
+ umc_dram_init_start(dramcont1);
+ umc_dram_init_poll(dramcont0);
+ umc_dram_init_poll(dramcont1);
+
+ writel(0x00000101, dramcont0 + UMC_DIOCTLA);
+
+ ph1_sld8_ddrphy_init(phy0_0, freq, size_ch0);
+
+ ddrphy_prepare_training(phy0_0, 0);
+ ddrphy_training(phy0_0);
+
+ writel(0x00000101, dramcont1 + UMC_DIOCTLA);
+
+ ph1_sld8_ddrphy_init(phy1_0, freq, size_ch1);
+
+ ddrphy_prepare_training(phy1_0, 1);
+ ddrphy_training(phy1_0);
+
+ umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
+ umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
+
+ umc_start_ssif(ssif_base);
+
+ return 0;
+}
+
+int ph1_sld8_umc_init(const struct uniphier_board_data *bd)
+{
+ if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) &&
+ (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) &&
+ bd->dram_freq == 1333 &&
+ bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) {
+ return umc_init_sub(bd->dram_freq,
+ bd->dram_ch0_size / SZ_128M,
+ bd->dram_ch1_size / SZ_128M);
+ } else {
+ pr_err("Unsupported DDR configuration\n");
+ return -EINVAL;
+ }
+}
#ifndef ARCH_DDRPHY_REGS_H
#define ARCH_DDRPHY_REGS_H
+#include <linux/bitops.h>
#include <linux/compiler.h>
#ifndef __ASSEMBLY__
#endif /* __ASSEMBLY__ */
-#define PIR_INIT (1 << 0) /* Initialization Trigger */
-#define PIR_ZCAL (1 << 1) /* Impedance Calibration */
-#define PIR_PLLINIT (1 << 4) /* PLL Initialization */
-#define PIR_DCAL (1 << 5) /* DDL Calibration */
-#define PIR_PHYRST (1 << 6) /* PHY Reset */
-#define PIR_DRAMRST (1 << 7) /* DRAM Reset */
-#define PIR_DRAMINIT (1 << 8) /* DRAM Initialization */
-#define PIR_WL (1 << 9) /* Write Leveling */
-#define PIR_QSGATE (1 << 10) /* Read DQS Gate Training */
-#define PIR_WLADJ (1 << 11) /* Write Leveling Adjust */
-#define PIR_RDDSKW (1 << 12) /* Read Data Bit Deskew */
-#define PIR_WRDSKW (1 << 13) /* Write Data Bit Deskew */
-#define PIR_RDEYE (1 << 14) /* Read Data Eye Training */
-#define PIR_WREYE (1 << 15) /* Write Data Eye Training */
-#define PIR_LOCKBYP (1 << 28) /* PLL Lock Bypass */
-#define PIR_DCALBYP (1 << 29) /* DDL Calibration Bypass */
-#define PIR_ZCALBYP (1 << 30) /* Impedance Calib Bypass */
-#define PIR_INITBYP (1 << 31) /* Initialization Bypass */
-
-#define PGSR0_IDONE (1 << 0) /* Initialization Done */
-#define PGSR0_PLDONE (1 << 1) /* PLL Lock Done */
-#define PGSR0_DCDONE (1 << 2) /* DDL Calibration Done */
-#define PGSR0_ZCDONE (1 << 3) /* Impedance Calibration Done */
-#define PGSR0_DIDONE (1 << 4) /* DRAM Initialization Done */
-#define PGSR0_WLDONE (1 << 5) /* Write Leveling Done */
-#define PGSR0_QSGDONE (1 << 6) /* DQS Gate Training Done */
-#define PGSR0_WLADONE (1 << 7) /* Write Leveling Adjust Done */
-#define PGSR0_RDDONE (1 << 8) /* Read Bit Deskew Done */
-#define PGSR0_WDDONE (1 << 9) /* Write Bit Deskew Done */
-#define PGSR0_REDONE (1 << 10) /* Read Eye Training Done */
-#define PGSR0_WEDONE (1 << 11) /* Write Eye Training Done */
-#define PGSR0_IERR (1 << 16) /* Initialization Error */
-#define PGSR0_PLERR (1 << 17) /* PLL Lock Error */
-#define PGSR0_DCERR (1 << 18) /* DDL Calibration Error */
-#define PGSR0_ZCERR (1 << 19) /* Impedance Calib Error */
-#define PGSR0_DIERR (1 << 20) /* DRAM Initialization Error */
-#define PGSR0_WLERR (1 << 21) /* Write Leveling Error */
-#define PGSR0_QSGERR (1 << 22) /* DQS Gate Training Error */
-#define PGSR0_WLAERR (1 << 23) /* Write Leveling Adj Error */
-#define PGSR0_RDERR (1 << 24) /* Read Bit Deskew Error */
-#define PGSR0_WDERR (1 << 25) /* Write Bit Deskew Error */
-#define PGSR0_REERR (1 << 26) /* Read Eye Training Error */
-#define PGSR0_WEERR (1 << 27) /* Write Eye Training Error */
+#define PIR_INIT BIT(0) /* Initialization Trigger */
+#define PIR_ZCAL BIT(1) /* Impedance Calibration */
+#define PIR_PLLINIT BIT(4) /* PLL Initialization */
+#define PIR_DCAL BIT(5) /* DDL Calibration */
+#define PIR_PHYRST BIT(6) /* PHY Reset */
+#define PIR_DRAMRST BIT(7) /* DRAM Reset */
+#define PIR_DRAMINIT BIT(8) /* DRAM Initialization */
+#define PIR_WL BIT(9) /* Write Leveling */
+#define PIR_QSGATE BIT(10) /* Read DQS Gate Training */
+#define PIR_WLADJ BIT(11) /* Write Leveling Adjust */
+#define PIR_RDDSKW BIT(12) /* Read Data Bit Deskew */
+#define PIR_WRDSKW BIT(13) /* Write Data Bit Deskew */
+#define PIR_RDEYE BIT(14) /* Read Data Eye Training */
+#define PIR_WREYE BIT(15) /* Write Data Eye Training */
+#define PIR_LOCKBYP BIT(28) /* PLL Lock Bypass */
+#define PIR_DCALBYP BIT(29) /* DDL Calibration Bypass */
+#define PIR_ZCALBYP BIT(30) /* Impedance Calib Bypass */
+#define PIR_INITBYP BIT(31) /* Initialization Bypass */
+
+#define PGSR0_IDONE BIT(0) /* Initialization Done */
+#define PGSR0_PLDONE BIT(1) /* PLL Lock Done */
+#define PGSR0_DCDONE BIT(2) /* DDL Calibration Done */
+#define PGSR0_ZCDONE BIT(3) /* Impedance Calibration Done */
+#define PGSR0_DIDONE BIT(4) /* DRAM Initialization Done */
+#define PGSR0_WLDONE BIT(5) /* Write Leveling Done */
+#define PGSR0_QSGDONE BIT(6) /* DQS Gate Training Done */
+#define PGSR0_WLADONE BIT(7) /* Write Leveling Adjust Done */
+#define PGSR0_RDDONE BIT(8) /* Read Bit Deskew Done */
+#define PGSR0_WDDONE BIT(9) /* Write Bit Deskew Done */
+#define PGSR0_REDONE BIT(10) /* Read Eye Training Done */
+#define PGSR0_WEDONE BIT(11) /* Write Eye Training Done */
+#define PGSR0_IERR BIT(16) /* Initialization Error */
+#define PGSR0_PLERR BIT(17) /* PLL Lock Error */
+#define PGSR0_DCERR BIT(18) /* DDL Calibration Error */
+#define PGSR0_ZCERR BIT(19) /* Impedance Calib Error */
+#define PGSR0_DIERR BIT(20) /* DRAM Initialization Error */
+#define PGSR0_WLERR BIT(21) /* Write Leveling Error */
+#define PGSR0_QSGERR BIT(22) /* DQS Gate Training Error */
+#define PGSR0_WLAERR BIT(23) /* Write Leveling Adj Error */
+#define PGSR0_RDERR BIT(24) /* Read Bit Deskew Error */
+#define PGSR0_WDERR BIT(25) /* Write Bit Deskew Error */
+#define PGSR0_REERR BIT(26) /* Read Eye Training Error */
+#define PGSR0_WEERR BIT(27) /* Write Eye Training Error */
#define PGSR0_DTERR_SHIFT 28 /* Data Training Error Status*/
#define PGSR0_DTERR (7 << (PGSR0_DTERR_SHIFT))
-#define PGSR0_APLOCK (1 << 31) /* AC PLL Lock */
+#define PGSR0_APLOCK BIT(31) /* AC PLL Lock */
#define DXCCR_DQSRES_OPEN (0 << 5)
#define DXCCR_DQSRES_688_OHM (1 << 5)
#define DTCR_DTRANK_SHIFT 4 /* Data Training Rank */
#define DTCR_DTRANK_MASK (0x3 << (DTCR_DTRANK_SHIFT))
-#define DTCR_DTMPR (1 << 6) /* Data Training using MPR */
-#define DTCR_RNKEN_SHIFT 24 /* Rank Enable */
-#define DTCR_RNKEN_MASK (0xf << (DTCR_RNKEN_SHIFT))
+#define DTCR_DTMPR BIT(6) /* Data Training using MPR */
+#define DTCR_RANKEN_SHIFT 24 /* Rank Enable */
+#define DTCR_RANKEN_MASK (0xf << (DTCR_RANKEN_SHIFT))
#define DXGCR_WLRKEN_SHIFT 26 /* Write Level Rank Enable */
#define DXGCR_WLRKEN_MASK (0xf << (DXGCR_WLRKEN_SHIFT))
unsigned int dram_freq;
};
-const struct uniphier_board_data *uniphier_get_board_param(const void *fdt);
+const struct uniphier_board_data *uniphier_get_board_param(void);
int ph1_sld3_init(const struct uniphier_board_data *bd);
int ph1_ld4_init(const struct uniphier_board_data *bd);
SOC_UNIPHIER_PH1_PRO5,
SOC_UNIPHIER_PROXSTREAM2,
SOC_UNIPHIER_PH1_LD6B,
+ SOC_UNIPHIER_PH1_SLD11,
+ SOC_UNIPHIER_PH1_LD10,
SOC_UNIPHIER_UNKNOWN,
};
IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + \
IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + \
IS_ENABLED(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + \
- IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
+ IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + \
+ IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_SLD11) + \
+ IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD10)
#define UNIPHIER_MULTI_SOC ((UNIPHIER_NR_ENABLED_SOCS) > 1)
#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
return SOC_UNIPHIER_PH1_LD6B;
#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD11)
+ return SOC_UNIPHIER_PH1_SLD11;
+#endif
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD10)
+ return SOC_UNIPHIER_PH1_LD10;
+#endif
return SOC_UNIPHIER_UNKNOWN;
}
#endif
+int uniphier_get_soc_model(void);
+int uniphier_get_soc_revision(void);
+
#endif /* __MACH_SOC_INFO_H__ */
#include <mach/init.h>
#include <mach/soc_info.h>
-DECLARE_GLOBAL_DATA_PTR;
-
void spl_board_init(void)
{
const struct uniphier_board_data *param;
- param = uniphier_get_board_param(gd->fdt_blob);
+ param = uniphier_get_board_param();
if (!param)
hang();
case 0x2F:
ret = SOC_UNIPHIER_PH1_LD6B;
break;
+#endif
+#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD11
+ case 0x31:
+ ret = SOC_UNIPHIER_PH1_SLD11;
+ break;
+#endif
+#ifdef CONFIG_ARCH_UNIPHIER_PH1_LD10
+ case 0x32:
+ ret = SOC_UNIPHIER_PH1_LD10;
+ break;
#endif
default:
ret = SOC_UNIPHIER_UNKNOWN;
return ret;
}
#endif
+
+int uniphier_get_soc_model(void)
+{
+ return (readl(SG_REVISION) & SG_REVISION_MODEL_MASK) >>
+ SG_REVISION_MODEL_SHIFT;
+}
+
+int uniphier_get_soc_revision(void)
+{
+ return (readl(SG_REVISION) & SG_REVISION_REV_MASK) >>
+ SG_REVISION_REV_SHIFT;
+}
+++ /dev/null
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += umc-ph1-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += umc-ph1-pro4.o
-obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += umc-ph1-sld8.o
+++ /dev/null
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-#include <mach/init.h>
-#include <mach/umc-regs.h>
-#include <mach/ddrphy-regs.h>
-
-static void umc_start_ssif(void __iomem *ssif_base)
-{
- writel(0x00000000, ssif_base + 0x0000b004);
- writel(0xffffffff, ssif_base + 0x0000c004);
- writel(0x000fffcf, ssif_base + 0x0000c008);
- writel(0x00000001, ssif_base + 0x0000b000);
- writel(0x00000001, ssif_base + 0x0000c000);
- writel(0x03010101, ssif_base + UMC_MDMCHSEL);
- writel(0x03010100, ssif_base + UMC_DMDCHSEL);
-
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
-
- writel(0x00000001, ssif_base + UMC_CPURST);
- writel(0x00000001, ssif_base + UMC_IDSRST);
- writel(0x00000001, ssif_base + UMC_IXMRST);
- writel(0x00000001, ssif_base + UMC_MDMRST);
- writel(0x00000001, ssif_base + UMC_MDDRST);
- writel(0x00000001, ssif_base + UMC_SIORST);
- writel(0x00000001, ssif_base + UMC_VIORST);
- writel(0x00000001, ssif_base + UMC_FRCRST);
- writel(0x00000001, ssif_base + UMC_RGLRST);
- writel(0x00000001, ssif_base + UMC_AIORST);
- writel(0x00000001, ssif_base + UMC_DMDRST);
-}
-
-static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
- int size, int freq)
-{
- if (freq == 1333) {
- writel(0x45990b11, dramcont + UMC_CMDCTLA);
- writel(0x16958924, dramcont + UMC_CMDCTLB);
- writel(0x5101046A, dramcont + UMC_INITCTLA);
-
- if (size == 1)
- writel(0x27028B0A, dramcont + UMC_INITCTLB);
- else if (size == 2)
- writel(0x38028B0A, dramcont + UMC_INITCTLB);
-
- writel(0x000FF0FF, dramcont + UMC_INITCTLC);
- writel(0x00000b51, dramcont + UMC_DRMMR0);
- } else if (freq == 1600) {
- writel(0x36BB0F17, dramcont + UMC_CMDCTLA);
- writel(0x18C6AA24, dramcont + UMC_CMDCTLB);
- writel(0x5101387F, dramcont + UMC_INITCTLA);
-
- if (size == 1)
- writel(0x2F030D3F, dramcont + UMC_INITCTLB);
- else if (size == 2)
- writel(0x43030D3F, dramcont + UMC_INITCTLB);
-
- writel(0x00FF00FF, dramcont + UMC_INITCTLC);
- writel(0x00000d71, dramcont + UMC_DRMMR0);
- }
-
- writel(0x00000006, dramcont + UMC_DRMMR1);
-
- if (freq == 1333)
- writel(0x00000290, dramcont + UMC_DRMMR2);
- else if (freq == 1600)
- writel(0x00000298, dramcont + UMC_DRMMR2);
-
- writel(0x00000800, dramcont + UMC_DRMMR3);
-
- if (freq == 1333) {
- if (size == 1)
- writel(0x00240512, dramcont + UMC_SPCCTLA);
- else if (size == 2)
- writel(0x00350512, dramcont + UMC_SPCCTLA);
-
- writel(0x00ff0006, dramcont + UMC_SPCCTLB);
- writel(0x000a00ac, dramcont + UMC_RDATACTL_D0);
- } else if (freq == 1600) {
- if (size == 1)
- writel(0x002B0617, dramcont + UMC_SPCCTLA);
- else if (size == 2)
- writel(0x003F0617, dramcont + UMC_SPCCTLA);
-
- writel(0x00ff0008, dramcont + UMC_SPCCTLB);
- writel(0x000c00ae, dramcont + UMC_RDATACTL_D0);
- }
-
- writel(0x04060806, dramcont + UMC_WDATACTL_D0);
- writel(0x04a02000, dramcont + UMC_DATASET);
- writel(0x00000000, ca_base + 0x2300);
- writel(0x00400020, dramcont + UMC_DCCGCTL);
- writel(0x00000003, dramcont + 0x7000);
- writel(0x0000000f, dramcont + 0x8000);
- writel(0x000000c3, dramcont + 0x8004);
- writel(0x00000071, dramcont + 0x8008);
- writel(0x0000003b, dramcont + UMC_DICGCTLA);
- writel(0x020a0808, dramcont + UMC_DICGCTLB);
- writel(0x00000004, dramcont + UMC_FLOWCTLG);
- writel(0x80000201, ca_base + 0xc20);
- writel(0x0801e01e, dramcont + UMC_FLOWCTLA);
- writel(0x00200000, dramcont + UMC_FLOWCTLB);
- writel(0x00004444, dramcont + UMC_FLOWCTLC);
- writel(0x200a0a00, dramcont + UMC_SPCSETB);
- writel(0x00000000, dramcont + UMC_SPCSETD);
- writel(0x00000520, dramcont + UMC_DFICUPDCTLA);
-}
-
-static int umc_init_sub(int freq, int size_ch0, int size_ch1)
-{
- void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
- void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
- void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
- void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
- void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
- void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
- void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
-
- umc_dram_init_start(dramcont0);
- umc_dram_init_start(dramcont1);
- umc_dram_init_poll(dramcont0);
- umc_dram_init_poll(dramcont1);
-
- writel(0x00000101, dramcont0 + UMC_DIOCTLA);
-
- ph1_ld4_ddrphy_init(phy0_0, freq, size_ch0);
-
- ddrphy_prepare_training(phy0_0, 0);
- ddrphy_training(phy0_0);
-
- writel(0x00000101, dramcont1 + UMC_DIOCTLA);
-
- ph1_ld4_ddrphy_init(phy1_0, freq, size_ch1);
-
- ddrphy_prepare_training(phy1_0, 1);
- ddrphy_training(phy1_0);
-
- umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
- umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
-
- umc_start_ssif(ssif_base);
-
- return 0;
-}
-
-int ph1_ld4_umc_init(const struct uniphier_board_data *bd)
-{
- if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) &&
- (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) &&
- (bd->dram_freq == 1333 || bd->dram_freq == 1600) &&
- bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) {
- return umc_init_sub(bd->dram_freq,
- bd->dram_ch0_size / SZ_128M,
- bd->dram_ch1_size / SZ_128M);
- } else {
- pr_err("Unsupported DDR configuration\n");
- return -EINVAL;
- }
-}
+++ /dev/null
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-#include <mach/init.h>
-#include <mach/umc-regs.h>
-#include <mach/ddrphy-regs.h>
-
-static void umc_start_ssif(void __iomem *ssif_base)
-{
- writel(0x00000001, ssif_base + 0x0000b004);
- writel(0xffffffff, ssif_base + 0x0000c004);
- writel(0x07ffffff, ssif_base + 0x0000c008);
- writel(0x00000001, ssif_base + 0x0000b000);
- writel(0x00000001, ssif_base + 0x0000c000);
-
- writel(0x03010100, ssif_base + UMC_HDMCHSEL);
- writel(0x03010101, ssif_base + UMC_MDMCHSEL);
- writel(0x03010100, ssif_base + UMC_DVCCHSEL);
- writel(0x03010100, ssif_base + UMC_DMDCHSEL);
-
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
- writel(0x00000000, ssif_base + 0x0000c044); /* DCGIV_SSIF_REG */
-
- writel(0x00000001, ssif_base + UMC_CPURST);
- writel(0x00000001, ssif_base + UMC_IDSRST);
- writel(0x00000001, ssif_base + UMC_IXMRST);
- writel(0x00000001, ssif_base + UMC_HDMRST);
- writel(0x00000001, ssif_base + UMC_MDMRST);
- writel(0x00000001, ssif_base + UMC_HDDRST);
- writel(0x00000001, ssif_base + UMC_MDDRST);
- writel(0x00000001, ssif_base + UMC_SIORST);
- writel(0x00000001, ssif_base + UMC_GIORST);
- writel(0x00000001, ssif_base + UMC_HD2RST);
- writel(0x00000001, ssif_base + UMC_VIORST);
- writel(0x00000001, ssif_base + UMC_DVCRST);
- writel(0x00000001, ssif_base + UMC_RGLRST);
- writel(0x00000001, ssif_base + UMC_VPERST);
- writel(0x00000001, ssif_base + UMC_AIORST);
- writel(0x00000001, ssif_base + UMC_DMDRST);
-}
-
-static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
- int size, int freq)
-{
- writel(0x66bb0f17, dramcont + UMC_CMDCTLA);
- writel(0x18c6aa44, dramcont + UMC_CMDCTLB);
- writel(0x5101387f, dramcont + UMC_INITCTLA);
- writel(0x43030d3f, dramcont + UMC_INITCTLB);
- writel(0x00ff00ff, dramcont + UMC_INITCTLC);
- writel(0x00000d71, dramcont + UMC_DRMMR0);
- writel(0x00000006, dramcont + UMC_DRMMR1);
- writel(0x00000298, dramcont + UMC_DRMMR2);
- writel(0x00000000, dramcont + UMC_DRMMR3);
- writel(0x003f0617, dramcont + UMC_SPCCTLA);
- writel(0x00ff0008, dramcont + UMC_SPCCTLB);
- writel(0x000c00ae, dramcont + UMC_RDATACTL_D0);
- writel(0x000c00ae, dramcont + UMC_RDATACTL_D1);
- writel(0x04060802, dramcont + UMC_WDATACTL_D0);
- writel(0x04060802, dramcont + UMC_WDATACTL_D1);
- writel(0x04a02000, dramcont + UMC_DATASET);
- writel(0x00000000, ca_base + 0x2300);
- writel(0x00400020, dramcont + UMC_DCCGCTL);
- writel(0x0000000f, dramcont + 0x7000);
- writel(0x0000000f, dramcont + 0x8000);
- writel(0x000000c3, dramcont + 0x8004);
- writel(0x00000071, dramcont + 0x8008);
- writel(0x00000004, dramcont + UMC_FLOWCTLG);
- writel(0x00000000, dramcont + 0x0060);
- writel(0x80000201, ca_base + 0xc20);
- writel(0x0801e01e, dramcont + UMC_FLOWCTLA);
- writel(0x00200000, dramcont + UMC_FLOWCTLB);
- writel(0x00004444, dramcont + UMC_FLOWCTLC);
- writel(0x200a0a00, dramcont + UMC_SPCSETB);
- writel(0x00010000, dramcont + UMC_SPCSETD);
- writel(0x80000020, dramcont + UMC_DFICUPDCTLA);
-}
-
-static int umc_init_sub(int freq, int size_ch0, int size_ch1)
-{
- void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
- void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
- void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
- void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
- void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
- void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
- void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1);
- void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
- void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1);
-
- umc_dram_init_start(dramcont0);
- umc_dram_init_start(dramcont1);
- umc_dram_init_poll(dramcont0);
- umc_dram_init_poll(dramcont1);
-
- writel(0x00000101, dramcont0 + UMC_DIOCTLA);
-
- ph1_pro4_ddrphy_init(phy0_0, freq, size_ch0);
-
- ddrphy_prepare_training(phy0_0, 0);
- ddrphy_training(phy0_0);
-
- writel(0x00000103, dramcont0 + UMC_DIOCTLA);
-
- ph1_pro4_ddrphy_init(phy0_1, freq, size_ch0);
-
- ddrphy_prepare_training(phy0_1, 1);
- ddrphy_training(phy0_1);
-
- writel(0x00000101, dramcont1 + UMC_DIOCTLA);
-
- ph1_pro4_ddrphy_init(phy1_0, freq, size_ch1);
-
- ddrphy_prepare_training(phy1_0, 0);
- ddrphy_training(phy1_0);
-
- writel(0x00000103, dramcont1 + UMC_DIOCTLA);
-
- ph1_pro4_ddrphy_init(phy1_1, freq, size_ch1);
-
- ddrphy_prepare_training(phy1_1, 1);
- ddrphy_training(phy1_1);
-
- umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
- umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
-
- umc_start_ssif(ssif_base);
-
- return 0;
-}
-
-int ph1_pro4_umc_init(const struct uniphier_board_data *bd)
-{
- if (((bd->dram_ch0_size == SZ_512M && bd->dram_ch0_width == 32) ||
- (bd->dram_ch0_size == SZ_256M && bd->dram_ch0_width == 16)) &&
- ((bd->dram_ch1_size == SZ_512M && bd->dram_ch1_width == 32) ||
- (bd->dram_ch1_size == SZ_256M && bd->dram_ch1_width == 16)) &&
- bd->dram_freq == 1600) {
- return umc_init_sub(bd->dram_freq,
- bd->dram_ch0_size / SZ_128M,
- bd->dram_ch1_size / SZ_128M);
- } else {
- pr_err("Unsupported DDR configuration\n");
- return -EINVAL;
- }
-}
+++ /dev/null
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
-#include <mach/init.h>
-#include <mach/umc-regs.h>
-#include <mach/ddrphy-regs.h>
-
-static void umc_start_ssif(void __iomem *ssif_base)
-{
- writel(0x00000000, ssif_base + 0x0000b004);
- writel(0xffffffff, ssif_base + 0x0000c004);
- writel(0x000fffcf, ssif_base + 0x0000c008);
- writel(0x00000001, ssif_base + 0x0000b000);
- writel(0x00000001, ssif_base + 0x0000c000);
- writel(0x03010101, ssif_base + UMC_MDMCHSEL);
- writel(0x03010100, ssif_base + UMC_DMDCHSEL);
-
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC);
- writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST);
-
- writel(0x00000001, ssif_base + UMC_CPURST);
- writel(0x00000001, ssif_base + UMC_IDSRST);
- writel(0x00000001, ssif_base + UMC_IXMRST);
- writel(0x00000001, ssif_base + UMC_MDMRST);
- writel(0x00000001, ssif_base + UMC_MDDRST);
- writel(0x00000001, ssif_base + UMC_SIORST);
- writel(0x00000001, ssif_base + UMC_VIORST);
- writel(0x00000001, ssif_base + UMC_FRCRST);
- writel(0x00000001, ssif_base + UMC_RGLRST);
- writel(0x00000001, ssif_base + UMC_AIORST);
- writel(0x00000001, ssif_base + UMC_DMDRST);
-}
-
-static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
- int size, int freq)
-{
-#ifdef CONFIG_DDR_STANDARD
- writel(0x55990b11, dramcont + UMC_CMDCTLA);
- writel(0x16958944, dramcont + UMC_CMDCTLB);
-#else
- writel(0x45990b11, dramcont + UMC_CMDCTLA);
- writel(0x16958924, dramcont + UMC_CMDCTLB);
-#endif
-
- writel(0x5101046A, dramcont + UMC_INITCTLA);
-
- if (size == 1)
- writel(0x27028B0A, dramcont + UMC_INITCTLB);
- else if (size == 2)
- writel(0x38028B0A, dramcont + UMC_INITCTLB);
-
- writel(0x00FF00FF, dramcont + UMC_INITCTLC);
- writel(0x00000b51, dramcont + UMC_DRMMR0);
- writel(0x00000006, dramcont + UMC_DRMMR1);
- writel(0x00000290, dramcont + UMC_DRMMR2);
-
-#ifdef CONFIG_DDR_STANDARD
- writel(0x00000000, dramcont + UMC_DRMMR3);
-#else
- writel(0x00000800, dramcont + UMC_DRMMR3);
-#endif
-
- if (size == 1)
- writel(0x00240512, dramcont + UMC_SPCCTLA);
- else if (size == 2)
- writel(0x00350512, dramcont + UMC_SPCCTLA);
-
- writel(0x00ff0006, dramcont + UMC_SPCCTLB);
- writel(0x000a00ac, dramcont + UMC_RDATACTL_D0);
- writel(0x04060806, dramcont + UMC_WDATACTL_D0);
- writel(0x04a02000, dramcont + UMC_DATASET);
- writel(0x00000000, ca_base + 0x2300);
- writel(0x00400020, dramcont + UMC_DCCGCTL);
- writel(0x00000003, dramcont + 0x7000);
- writel(0x0000004f, dramcont + 0x8000);
- writel(0x000000c3, dramcont + 0x8004);
- writel(0x00000077, dramcont + 0x8008);
- writel(0x0000003b, dramcont + UMC_DICGCTLA);
- writel(0x020a0808, dramcont + UMC_DICGCTLB);
- writel(0x00000004, dramcont + UMC_FLOWCTLG);
- writel(0x80000201, ca_base + 0xc20);
- writel(0x0801e01e, dramcont + UMC_FLOWCTLA);
- writel(0x00200000, dramcont + UMC_FLOWCTLB);
- writel(0x00004444, dramcont + UMC_FLOWCTLC);
- writel(0x200a0a00, dramcont + UMC_SPCSETB);
- writel(0x00000000, dramcont + UMC_SPCSETD);
- writel(0x00000520, dramcont + UMC_DFICUPDCTLA);
-}
-
-static int umc_init_sub(int freq, int size_ch0, int size_ch1)
-{
- void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
- void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
- void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1);
- void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0);
- void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1);
- void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0);
- void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
-
- umc_dram_init_start(dramcont0);
- umc_dram_init_start(dramcont1);
- umc_dram_init_poll(dramcont0);
- umc_dram_init_poll(dramcont1);
-
- writel(0x00000101, dramcont0 + UMC_DIOCTLA);
-
- ph1_sld8_ddrphy_init(phy0_0, freq, size_ch0);
-
- ddrphy_prepare_training(phy0_0, 0);
- ddrphy_training(phy0_0);
-
- writel(0x00000101, dramcont1 + UMC_DIOCTLA);
-
- ph1_sld8_ddrphy_init(phy1_0, freq, size_ch1);
-
- ddrphy_prepare_training(phy1_0, 1);
- ddrphy_training(phy1_0);
-
- umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
- umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
-
- umc_start_ssif(ssif_base);
-
- return 0;
-}
-
-int ph1_sld8_umc_init(const struct uniphier_board_data *bd)
-{
- if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) &&
- (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) &&
- bd->dram_freq == 1333 &&
- bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) {
- return umc_init_sub(bd->dram_freq,
- bd->dram_ch0_size / SZ_128M,
- bd->dram_ch1_size / SZ_128M);
- } else {
- pr_err("Unsupported DDR configuration\n");
- return -EINVAL;
- }
-}
F: configs/Auxtek-T003_defconfig
F: configs/Auxtek-T004_defconfig
F: configs/CHIP_defconfig
+F: configs/Empire_electronix_d709_defconfig
F: configs/inet98v_rev2_defconfig
F: configs/mk802_a10s_defconfig
F: configs/q8_a13_tablet_defconfig
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=480
CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_MMC3_CD_PIN="PH0"
+CONFIG_MMC3_PINS="PH"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=3
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_USB0_VBUS_DET="PH5"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN5I=y
+CONFIG_DRAM_CLK=432
+CONFIG_DRAM_EMR1=0
+CONFIG_MMC0_CD_PIN="PG0"
+CONFIG_USB0_VBUS_PIN="PG12"
+CONFIG_USB0_VBUS_DET="PG1"
+CONFIG_USB0_ID_DET="PG2"
+CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:210,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_POWER="AXP0-0"
+CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-d709"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_USB_MUSB_HOST=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
+CONFIG_SUNXI_NO_PMIC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_USE_PRIVATE_LIBGCC=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ARCH_UNIPHIER_PH1_LD4=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref"
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_SIMPLE_BUS=y
-CONFIG_NAND_DENALI=y
-CONFIG_SYS_NAND_DENALI_64BIT=y
-CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
-CONFIG_SPL_NAND_DENALI=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ARCH_UNIPHIER_PH1_LD6B=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld6b-ref"
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_SIMPLE_BUS=y
-CONFIG_NAND_DENALI=y
-CONFIG_SYS_NAND_DENALI_64BIT=y
-CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
-CONFIG_SPL_NAND_DENALI=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_STORAGE=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ARCH_UNIPHIER_PH1_PRO4=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref"
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_SIMPLE_BUS=y
-CONFIG_NAND_DENALI=y
-CONFIG_SYS_NAND_DENALI_64BIT=y
-CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
-CONFIG_SPL_NAND_DENALI=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_STORAGE=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ARCH_UNIPHIER_PH1_PRO5=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro5-4kbox"
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_SIMPLE_BUS=y
-CONFIG_NAND_DENALI=y
-CONFIG_SYS_NAND_DENALI_64BIT=y
-CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
-CONFIG_SPL_NAND_DENALI=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_STORAGE=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_ARCH_UNIPHIER_PH1_SLD3=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld3-ref"
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NAND_DENALI=y
-CONFIG_SYS_NAND_DENALI_64BIT=y
-CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
-CONFIG_SPL_NAND_DENALI=y
-CONFIG_UNIPHIER_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ARCH_UNIPHIER_PH1_SLD8=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref"
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_SIMPLE_BUS=y
-CONFIG_NAND_DENALI=y
-CONFIG_SYS_NAND_DENALI_64BIT=y
-CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
-CONFIG_SPL_NAND_DENALI=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PH1_LD4=y
+CONFIG_ARCH_UNIPHIER_PH1_SLD8=y
+CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_TEXT_BASE=0x84000000
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_MISC is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
+CONFIG_NAND_DENALI=y
+CONFIG_SYS_NAND_DENALI_64BIT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_SPL_NAND_DENALI=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_UNIPHIER_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PH1_PRO4=y
+CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_TEXT_BASE=0x84000000
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_MISC is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
+CONFIG_NAND_DENALI=y
+CONFIG_SYS_NAND_DENALI_64BIT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_SPL_NAND_DENALI=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_UNIPHIER_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_STORAGE=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PH1_PRO5=y
+CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_TEXT_BASE=0x84000000
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro5-4kbox"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_MISC is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
+CONFIG_NAND_DENALI=y
+CONFIG_SYS_NAND_DENALI_64BIT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_SPL_NAND_DENALI=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_UNIPHIER_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_STORAGE=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PROXSTREAM2=y
+CONFIG_ARCH_UNIPHIER_PH1_LD6B=y
+CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_TEXT_BASE=0x84000000
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-proxstream2-vodka"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_MISC is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_SIMPLE_BUS=y
+CONFIG_NAND_DENALI=y
+CONFIG_SYS_NAND_DENALI_64BIT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_SPL_NAND_DENALI=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_UNIPHIER_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_STORAGE=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_ARCH_UNIPHIER_PH1_SLD3=y
+CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_TEXT_BASE=0x84000000
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld3-ref"
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_MISC is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NAND_DENALI=y
+CONFIG_SYS_NAND_DENALI_64BIT=y
+CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_SPL_NAND_DENALI=y
+CONFIG_UNIPHIER_SERIAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
Compile the source
------------------
-PH1-sLD3:
- $ make ph1_sld3_defconfig
+PH1-sLD3 reference board:
+ $ make uniphier_sld3_defconfig
$ make CROSS_COMPILE=arm-linux-gnueabi-
-PH1-LD4:
- $ make ph1_ld4_defconfig
+PH1-LD4 reference board:
+ $ make uniphier_ld4_sld8_defconfig
$ make CROSS_COMPILE=arm-linux-gnueabi-
-PH1-Pro4:
- $ make ph1_pro4_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabi-
+PH1-sLD8 reference board:
+ $ make uniphier_ld4_sld8_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-sld8-ref
-PH1-sLD8:
- $ make ph1_sld8_defconfig
+PH1-Pro4 reference board:
+ $ make uniphier_pro4_defconfig
$ make CROSS_COMPILE=arm-linux-gnueabi-
-PH1-Pro5:
- $ make ph1_pro5_defconfig
+PH1-Pro5 4KBOX Board:
+ $ make uniphier_pro5_defconfig
$ make CROSS_COMPILE=arm-linux-gnueabi-
-ProXstream2:
- $ make pxs2_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabi-
+ProXstream2 Gentil board:
+ $ make uniphier_pxs2_ld6b_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-proxstream2-gentil
-PH1-LD6b:
- $ make ph1_ld6b_defconfig
+ProXstream2 Vodka board:
+ $ make uniphier_pxs2_ld6b_defconfig
$ make CROSS_COMPILE=arm-linux-gnueabi-
+PH1-LD6b reference board:
+ $ make uniphier_pxs2_ld6b_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-ld6b-ref
+
You may wish to change the "CROSS_COMPILE=arm-linux-gnueabi-"
to use your favorite compiler.
#define CONFIG_MII
#define CONFIG_PHY_GIGE
+/*
+ * USB 1.1 configuration
+ */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
+
/*
* Commands still not supported in Kconfig
*/
#ifdef CONFIG_MMC
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
+#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
+#define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
+#else
+#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
+#endif
#else
#define BOOT_TARGET_DEVICES_MMC(func)
+#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
#endif
#ifdef CONFIG_AHCI
#define BOOT_TARGET_DEVICES(func) \
func(FEL, fel, na) \
BOOT_TARGET_DEVICES_MMC(func) \
+ BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
BOOT_TARGET_DEVICES_SCSI(func) \
BOOT_TARGET_DEVICES_USB(func) \
func(PXE, pxe, na) \
"tftpboot=tftpboot $fit_addr_r $bootfile &&" \
"bootm $fit_addr_r\0"
#else
-#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_BOOTFILE "zImage"
#define LINUXBOOT_ENV_SETTINGS \
"fdt_addr=0x00100000\0" \
"fdt_addr_r=0x84100000\0" \
"fdt_size=0x00008000\0" \
- "fdt_file=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"kernel_addr=0x00200000\0" \
- "kernel_addr_r=0x84200000\0" \
+ "kernel_addr_r=0x80208000\0" \
"kernel_size=0x00800000\0" \
"ramdisk_addr=0x00a00000\0" \
"ramdisk_addr_r=0x84a00000\0" \
"norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
"setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \
"setexpr fdt_addr $nor_base + $fdt_addr &&" \
- "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
+ "bootz $kernel_addr $ramdisk_addr $fdt_addr\0" \
"nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
"nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
- "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
+ "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
"tftpboot $fdt_addr_r $fdt_file &&" \
- "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
+ "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
projects / u-boot / commitdiff