select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
- select SPL_STACK_R if !MACH_SUN9I
- select SPL_SYS_MALLOC_SIMPLE if !MACH_SUN9I
+ select SPL_STACK_R if SUPPORT_SPL
+ select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
select SYS_NS16550
select USB
select USB_STORAGE
# TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
machine-$(CONFIG_ORION5X) += orion5x
machine-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx
+machine-$(CONFIG_ARCH_SUNXI) += sunxi
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_STM32) += stm32
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += timer.o
-obj-y += board.o
-obj-y += clock.o
-obj-y += cpu_info.o
-obj-y += dram_helpers.o
-obj-y += pinmux.o
-ifndef CONFIG_MACH_SUN9I
-obj-y += usb_phy.o
-endif
-obj-$(CONFIG_MACH_SUN6I) += prcm.o
-obj-$(CONFIG_MACH_SUN8I) += prcm.o
-obj-$(CONFIG_MACH_SUN9I) += prcm.o
-obj-$(CONFIG_MACH_SUN6I) += p2wi.o
-obj-$(CONFIG_MACH_SUN8I) += rsb.o
-obj-$(CONFIG_MACH_SUN9I) += rsb.o
-obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
-obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
-obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
-obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o
-ifdef CONFIG_MACH_SUN8I_A83T
-obj-y += clock_sun8i_a83t.o
-else
-obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
-endif
-obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o
+
obj-$(CONFIG_MACH_SUN6I) += tzpc.o
obj-$(CONFIG_MACH_SUN8I_H3) += tzpc.o
-obj-$(CONFIG_AXP152_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP209_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP221_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP818_POWER) += pmic_bus.o
-
ifndef CONFIG_SPL_BUILD
ifdef CONFIG_ARMV7_PSCI
obj-$(CONFIG_MACH_SUN6I) += psci_sun6i.o
endif
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o
-obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
-obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o
-obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
-obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
-obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
-obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
-obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o
obj-y += fel_utils.o
endif
+++ /dev/null
-/*
- * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
- *
- * (C) Copyright 2007-2011
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * Some init for sunxi platform.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mmc.h>
-#include <i2c.h>
-#include <serial.h>
-#ifdef CONFIG_SPL_BUILD
-#include <spl.h>
-#endif
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/spl.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/timer.h>
-#include <asm/arch/tzpc.h>
-#include <asm/arch/mmc.h>
-
-#include <linux/compiler.h>
-
-struct fel_stash {
- uint32_t sp;
- uint32_t lr;
- uint32_t cpsr;
- uint32_t sctlr;
- uint32_t vbar;
- uint32_t cr;
-};
-
-struct fel_stash fel_stash __attribute__((section(".data")));
-
-static int gpio_init(void)
-{
-#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
- /* disable GPB22,23 as uart0 tx,rx to avoid conflict */
- sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
-#endif
-#if defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0);
-#else
- sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0);
-#endif
- sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
-#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I))
- sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB_UART0);
- sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN5I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB_UART0);
- sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN6I)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH_UART0);
- sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A33)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0);
- sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_H3)
- sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
- sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);
- sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0);
- sunxi_gpio_set_pull(SUNXI_GPH(13), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
- sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
- sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
- sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_GPB_UART2);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
- sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL_R_UART);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL_R_UART);
- sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
-#else
-#error Unsupported console port number. Please fix pin mux settings in board.c
-#endif
-
- return 0;
-}
-
-int spl_board_load_image(void)
-{
- debug("Returning to FEL sp=%x, lr=%x\n", fel_stash.sp, fel_stash.lr);
- return_to_fel(fel_stash.sp, fel_stash.lr);
-
- return 0;
-}
-
-void s_init(void)
-{
- /*
- * Undocumented magic taken from boot0, without this DRAM
- * access gets messed up (seems cache related).
- * The boot0 sources describe this as: "config ema for cache sram"
- */
-#if defined CONFIG_MACH_SUN6I
- setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
-#elif defined CONFIG_MACH_SUN8I_A23
- uint version;
-
- /* Unlock sram version info reg, read it, relock */
- setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
- version = readl(SUNXI_SRAMC_BASE + 0x24);
- clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
-
- if ((version & 0xffff0000) == 0x16500000)
- setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
- else /* 0x1661 ? */
- setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0);
-#endif
-
-#if defined CONFIG_MACH_SUN6I || \
- defined CONFIG_MACH_SUN7I || \
- defined CONFIG_MACH_SUN8I
- /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
- asm volatile(
- "mrc p15, 0, r0, c1, c0, 1\n"
- "orr r0, r0, #1 << 6\n"
- "mcr p15, 0, r0, c1, c0, 1\n");
-#endif
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_H3
- /* Enable non-secure access to some peripherals */
- tzpc_init();
-#endif
-
- clock_init();
- timer_init();
- gpio_init();
- i2c_init_board();
- eth_init_board();
-}
-
-#ifdef CONFIG_SPL_BUILD
-DECLARE_GLOBAL_DATA_PTR;
-
-/* The sunxi internal brom will try to loader external bootloader
- * from mmc0, nand flash, mmc2.
- */
-u32 spl_boot_device(void)
-{
- __maybe_unused struct mmc *mmc0, *mmc1;
- /*
- * When booting from the SD card or NAND memory, the "eGON.BT0"
- * signature is expected to be found in memory at the address 0x0004
- * (see the "mksunxiboot" tool, which generates this header).
- *
- * When booting in the FEL mode over USB, this signature is patched in
- * memory and replaced with something else by the 'fel' tool. This other
- * signature is selected in such a way, that it can't be present in a
- * valid bootable SD card image (because the BROM would refuse to
- * execute the SPL in this case).
- *
- * This checks for the signature and if it is not found returns to
- * the FEL code in the BROM to wait and receive the main u-boot
- * binary over USB. If it is found, it determines where SPL was
- * read from.
- */
- if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */
- return BOOT_DEVICE_BOARD;
-
- /* The BROM will try to boot from mmc0 first, so try that first. */
-#ifdef CONFIG_MMC
- mmc_initialize(gd->bd);
- mmc0 = find_mmc_device(0);
- if (sunxi_mmc_has_egon_boot_signature(mmc0))
- return BOOT_DEVICE_MMC1;
-#endif
-
- /* Fallback to booting NAND if enabled. */
- if (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT))
- return BOOT_DEVICE_NAND;
-
-#ifdef CONFIG_MMC
- if (CONFIG_MMC_SUNXI_SLOT_EXTRA == 2) {
- mmc1 = find_mmc_device(1);
- if (sunxi_mmc_has_egon_boot_signature(mmc1))
- return BOOT_DEVICE_MMC2;
- }
-#endif
-
- panic("Could not determine boot source\n");
- return -1; /* Never reached */
-}
-
-/* No confirmation data available in SPL yet. Hardcode bootmode */
-u32 spl_boot_mode(void)
-{
- return MMCSD_MODE_RAW;
-}
-
-void board_init_f(ulong dummy)
-{
- spl_init();
- preloader_console_init();
-
-#ifdef CONFIG_SPL_I2C_SUPPORT
- /* Needed early by sunxi_board_init if PMU is enabled */
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
- sunxi_board_init();
-}
-#endif
-
-void reset_cpu(ulong addr)
-{
-#ifdef CONFIG_SUNXI_GEN_SUN4I
- static const struct sunxi_wdog *wdog =
- &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-
- /* Set the watchdog for its shortest interval (.5s) and wait */
- writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
- writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
-
- while (1) {
- /* sun5i sometimes gets stuck without this */
- writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
- }
-#endif
-#ifdef CONFIG_SUNXI_GEN_SUN6I
- static const struct sunxi_wdog *wdog =
- ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-
- /* Set the watchdog for its shortest interval (.5s) and wait */
- writel(WDT_CFG_RESET, &wdog->cfg);
- writel(WDT_MODE_EN, &wdog->mode);
- writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
- while (1) { }
-#endif
-}
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
-}
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2007-2012
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/prcm.h>
-#include <asm/arch/sys_proto.h>
-
-__weak void clock_init_sec(void)
-{
-}
-
-int clock_init(void)
-{
-#ifdef CONFIG_SPL_BUILD
- clock_init_safe();
-#endif
- clock_init_uart();
- clock_init_sec();
-
- return 0;
-}
-
-/* These functions are shared between various SoCs so put them here. */
-#if defined CONFIG_SUNXI_GEN_SUN6I && !defined CONFIG_MACH_SUN9I
-int clock_twi_onoff(int port, int state)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- if (port == 5) {
- if (state)
- prcm_apb0_enable(
- PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
- else
- prcm_apb0_disable(
- PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
- return 0;
- }
-
- /* set the apb clock gate and reset for twi */
- if (state) {
- setbits_le32(&ccm->apb2_gate,
- CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port));
- setbits_le32(&ccm->apb2_reset_cfg,
- 1 << (APB2_RESET_TWI_SHIFT + port));
- } else {
- clrbits_le32(&ccm->apb2_reset_cfg,
- 1 << (APB2_RESET_TWI_SHIFT + port));
- clrbits_le32(&ccm->apb2_gate,
- CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port));
- }
-
- return 0;
-}
-#endif
+++ /dev/null
-/*
- * sun4i, sun5i and sun7i specific clock code
- *
- * (C) Copyright 2007-2012
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/sys_proto.h>
-
-#ifdef CONFIG_SPL_BUILD
-void clock_init_safe(void)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* Set safe defaults until PMU is configured */
- writel(AXI_DIV_1 << AXI_DIV_SHIFT |
- AHB_DIV_2 << AHB_DIV_SHIFT |
- APB0_DIV_1 << APB0_DIV_SHIFT |
- CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
- &ccm->cpu_ahb_apb0_cfg);
- writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg);
- sdelay(200);
- writel(AXI_DIV_1 << AXI_DIV_SHIFT |
- AHB_DIV_2 << AHB_DIV_SHIFT |
- APB0_DIV_1 << APB0_DIV_SHIFT |
- CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
- &ccm->cpu_ahb_apb0_cfg);
-#ifdef CONFIG_MACH_SUN7I
- setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_DMA);
-#endif
- writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
-#ifdef CONFIG_SUNXI_AHCI
- setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_SATA);
- setbits_le32(&ccm->pll6_cfg, 0x1 << CCM_PLL6_CTRL_SATA_EN_SHIFT);
-#endif
-}
-#endif
-
-void clock_init_uart(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* uart clock source is apb1 */
- writel(APB1_CLK_SRC_OSC24M|
- APB1_CLK_RATE_N_1|
- APB1_CLK_RATE_M(1),
- &ccm->apb1_clk_div_cfg);
-
- /* open the clock for uart */
- setbits_le32(&ccm->apb1_gate,
- CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX - 1));
-}
-
-int clock_twi_onoff(int port, int state)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* set the apb clock gate for twi */
- if (state)
- setbits_le32(&ccm->apb1_gate,
- CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
- else
- clrbits_le32(&ccm->apb1_gate,
- CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
-
- return 0;
-}
-
-#ifdef CONFIG_SPL_BUILD
-#define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \
- 0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \
- 8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \
- 0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \
- 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \
- (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \
- 2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \
- (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \
- (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \
- 0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \
- 0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \
- (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT)
-
-static struct {
- u32 pll1_cfg;
- unsigned int freq;
-} pll1_para[] = {
- /* This array must be ordered by frequency. */
- { PLL1_CFG(31, 1, 0, 0), 1488000000},
- { PLL1_CFG(30, 1, 0, 0), 1440000000},
- { PLL1_CFG(29, 1, 0, 0), 1392000000},
- { PLL1_CFG(28, 1, 0, 0), 1344000000},
- { PLL1_CFG(27, 1, 0, 0), 1296000000},
- { PLL1_CFG(26, 1, 0, 0), 1248000000},
- { PLL1_CFG(25, 1, 0, 0), 1200000000},
- { PLL1_CFG(24, 1, 0, 0), 1152000000},
- { PLL1_CFG(23, 1, 0, 0), 1104000000},
- { PLL1_CFG(22, 1, 0, 0), 1056000000},
- { PLL1_CFG(21, 1, 0, 0), 1008000000},
- { PLL1_CFG(20, 1, 0, 0), 960000000 },
- { PLL1_CFG(19, 1, 0, 0), 912000000 },
- { PLL1_CFG(16, 1, 0, 0), 768000000 },
- /* Final catchall entry 384MHz*/
- { PLL1_CFG(16, 0, 0, 0), 0 },
-
-};
-
-void clock_set_pll1(unsigned int hz)
-{
- int i = 0;
- int axi, ahb, apb0;
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* Find target frequency */
- while (pll1_para[i].freq > hz)
- i++;
-
- hz = pll1_para[i].freq;
- if (! hz)
- hz = 384000000;
-
- /* Calculate system clock divisors */
- axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */
- ahb = DIV_ROUND_UP(hz/axi, 204000000); /* Max 250MHz */
- apb0 = 2; /* Max 150MHz */
-
- printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0);
-
- /* Map divisors to register values */
- axi = axi - 1;
- if (ahb > 4)
- ahb = 3;
- else if (ahb > 2)
- ahb = 2;
- else if (ahb > 1)
- ahb = 1;
- else
- ahb = 0;
-
- apb0 = apb0 - 1;
-
- /* Switch to 24MHz clock while changing PLL1 */
- writel(AXI_DIV_1 << AXI_DIV_SHIFT |
- AHB_DIV_2 << AHB_DIV_SHIFT |
- APB0_DIV_1 << APB0_DIV_SHIFT |
- CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
- &ccm->cpu_ahb_apb0_cfg);
- sdelay(20);
-
- /* Configure sys clock divisors */
- writel(axi << AXI_DIV_SHIFT |
- ahb << AHB_DIV_SHIFT |
- apb0 << APB0_DIV_SHIFT |
- CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
- &ccm->cpu_ahb_apb0_cfg);
-
- /* Configure PLL1 at the desired frequency */
- writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg);
- sdelay(200);
-
- /* Switch CPU to PLL1 */
- writel(axi << AXI_DIV_SHIFT |
- ahb << AHB_DIV_SHIFT |
- apb0 << APB0_DIV_SHIFT |
- CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
- &ccm->cpu_ahb_apb0_cfg);
- sdelay(20);
-}
-#endif
-
-void clock_set_pll3(unsigned int clk)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- if (clk == 0) {
- clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN);
- return;
- }
-
- /* PLL3 rate = 3000000 * m */
- writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
- CCM_PLL3_CTRL_M(clk / 3000000), &ccm->pll3_cfg);
-}
-
-unsigned int clock_get_pll3(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- uint32_t rval = readl(&ccm->pll3_cfg);
- int m = ((rval & CCM_PLL3_CTRL_M_MASK) >> CCM_PLL3_CTRL_M_SHIFT);
- return 3000000 * m;
-}
-
-unsigned int clock_get_pll5p(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- uint32_t rval = readl(&ccm->pll5_cfg);
- int n = ((rval & CCM_PLL5_CTRL_N_MASK) >> CCM_PLL5_CTRL_N_SHIFT);
- int k = ((rval & CCM_PLL5_CTRL_K_MASK) >> CCM_PLL5_CTRL_K_SHIFT) + 1;
- int p = ((rval & CCM_PLL5_CTRL_P_MASK) >> CCM_PLL5_CTRL_P_SHIFT);
- return (24000000 * n * k) >> p;
-}
-
-unsigned int clock_get_pll6(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- uint32_t rval = readl(&ccm->pll6_cfg);
- int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
- int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
- return 24000000 * n * k / 2;
-}
-
-void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz)
-{
- int pll = clock_get_pll5p();
- int div = 1;
-
- while ((pll / div) > hz)
- div++;
-
- writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_RST | CCM_DE_CTRL_PLL5P |
- CCM_DE_CTRL_M(div), clk_cfg);
-}
+++ /dev/null
-/*
- * sun6i specific clock code
- *
- * (C) Copyright 2007-2012
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/prcm.h>
-#include <asm/arch/sys_proto.h>
-
-#ifdef CONFIG_SPL_BUILD
-void clock_init_safe(void)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_prcm_reg * const prcm =
- (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
-
- /* Set PLL ldo voltage without this PLL6 does not work properly */
- clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
- PRCM_PLL_CTRL_LDO_KEY);
- clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
- PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
- PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
- clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
-
- clock_set_pll1(408000000);
-
- writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
- while (!(readl(&ccm->pll6_cfg) & CCM_PLL6_CTRL_LOCK))
- ;
-
- writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
-
- writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg);
- writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg);
-}
-#endif
-
-void clock_init_sec(void)
-{
-#ifdef CONFIG_MACH_SUN8I_H3
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- setbits_le32(&ccm->ccu_sec_switch,
- CCM_SEC_SWITCH_MBUS_NONSEC |
- CCM_SEC_SWITCH_BUS_NONSEC |
- CCM_SEC_SWITCH_PLL_NONSEC);
-#endif
-}
-
-void clock_init_uart(void)
-{
-#if CONFIG_CONS_INDEX < 5
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* uart clock source is apb2 */
- writel(APB2_CLK_SRC_OSC24M|
- APB2_CLK_RATE_N_1|
- APB2_CLK_RATE_M(1),
- &ccm->apb2_div);
-
- /* open the clock for uart */
- setbits_le32(&ccm->apb2_gate,
- CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
- CONFIG_CONS_INDEX - 1));
-
- /* deassert uart reset */
- setbits_le32(&ccm->apb2_reset_cfg,
- 1 << (APB2_RESET_UART_SHIFT +
- CONFIG_CONS_INDEX - 1));
-#else
- /* enable R_PIO and R_UART clocks, and de-assert resets */
- prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART);
-#endif
-}
-
-#ifdef CONFIG_SPL_BUILD
-void clock_set_pll1(unsigned int clk)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- const int p = 0;
- int k = 1;
- int m = 1;
-
- if (clk > 1152000000) {
- k = 2;
- } else if (clk > 768000000) {
- k = 3;
- m = 2;
- }
-
- /* Switch to 24MHz clock while changing PLL1 */
- writel(AXI_DIV_3 << AXI_DIV_SHIFT |
- ATB_DIV_2 << ATB_DIV_SHIFT |
- CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
- &ccm->cpu_axi_cfg);
-
- /*
- * sun6i: PLL1 rate = ((24000000 * n * k) >> 0) / m (p is ignored)
- * sun8i: PLL1 rate = ((24000000 * n * k) >> p) / m
- */
- writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) |
- CCM_PLL1_CTRL_N(clk / (24000000 * k / m)) |
- CCM_PLL1_CTRL_K(k) | CCM_PLL1_CTRL_M(m), &ccm->pll1_cfg);
- sdelay(200);
-
- /* Switch CPU to PLL1 */
- writel(AXI_DIV_3 << AXI_DIV_SHIFT |
- ATB_DIV_2 << ATB_DIV_SHIFT |
- CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
- &ccm->cpu_axi_cfg);
-}
-#endif
-
-void clock_set_pll3(unsigned int clk)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- const int m = 8; /* 3 MHz steps just like sun4i, sun5i and sun7i */
-
- if (clk == 0) {
- clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN);
- return;
- }
-
- /* PLL3 rate = 24000000 * n / m */
- writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
- CCM_PLL3_CTRL_N(clk / (24000000 / m)) | CCM_PLL3_CTRL_M(m),
- &ccm->pll3_cfg);
-}
-
-void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- const int max_n = 32;
- int k = 1, m = 2;
-
- if (sigma_delta_enable)
- writel(CCM_PLL5_PATTERN, &ccm->pll5_pattern_cfg);
-
- /* PLL5 rate = 24000000 * n * k / m */
- if (clk > 24000000 * k * max_n / m) {
- m = 1;
- if (clk > 24000000 * k * max_n / m)
- k = 2;
- }
- writel(CCM_PLL5_CTRL_EN |
- (sigma_delta_enable ? CCM_PLL5_CTRL_SIGMA_DELTA_EN : 0) |
- CCM_PLL5_CTRL_UPD |
- CCM_PLL5_CTRL_N(clk / (24000000 * k / m)) |
- CCM_PLL5_CTRL_K(k) | CCM_PLL5_CTRL_M(m), &ccm->pll5_cfg);
-
- udelay(5500);
-}
-
-#ifdef CONFIG_MACH_SUN6I
-void clock_set_mipi_pll(unsigned int clk)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- unsigned int k, m, n, value, diff;
- unsigned best_k = 0, best_m = 0, best_n = 0, best_diff = 0xffffffff;
- unsigned int src = clock_get_pll3();
-
- /* All calculations are in KHz to avoid overflows */
- clk /= 1000;
- src /= 1000;
-
- /* Pick the closest lower clock */
- for (k = 1; k <= 4; k++) {
- for (m = 1; m <= 16; m++) {
- for (n = 1; n <= 16; n++) {
- value = src * n * k / m;
- if (value > clk)
- continue;
-
- diff = clk - value;
- if (diff < best_diff) {
- best_diff = diff;
- best_k = k;
- best_m = m;
- best_n = n;
- }
- if (diff == 0)
- goto done;
- }
- }
- }
-
-done:
- writel(CCM_MIPI_PLL_CTRL_EN | CCM_MIPI_PLL_CTRL_LDO_EN |
- CCM_MIPI_PLL_CTRL_N(best_n) | CCM_MIPI_PLL_CTRL_K(best_k) |
- CCM_MIPI_PLL_CTRL_M(best_m), &ccm->mipi_pll_cfg);
-}
-#endif
-
-#ifdef CONFIG_MACH_SUN8I_A33
-void clock_set_pll11(unsigned int clk, bool sigma_delta_enable)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- if (sigma_delta_enable)
- writel(CCM_PLL11_PATTERN, &ccm->pll5_pattern_cfg);
-
- writel(CCM_PLL11_CTRL_EN | CCM_PLL11_CTRL_UPD |
- (sigma_delta_enable ? CCM_PLL11_CTRL_SIGMA_DELTA_EN : 0) |
- CCM_PLL11_CTRL_N(clk / 24000000), &ccm->pll11_cfg);
-
- while (readl(&ccm->pll11_cfg) & CCM_PLL11_CTRL_UPD)
- ;
-}
-#endif
-
-unsigned int clock_get_pll3(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- uint32_t rval = readl(&ccm->pll3_cfg);
- int n = ((rval & CCM_PLL3_CTRL_N_MASK) >> CCM_PLL3_CTRL_N_SHIFT) + 1;
- int m = ((rval & CCM_PLL3_CTRL_M_MASK) >> CCM_PLL3_CTRL_M_SHIFT) + 1;
-
- /* Multiply by 1000 after dividing by m to avoid integer overflows */
- return (24000 * n / m) * 1000;
-}
-
-unsigned int clock_get_pll6(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- uint32_t rval = readl(&ccm->pll6_cfg);
- int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
- int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
- return 24000000 * n * k / 2;
-}
-
-unsigned int clock_get_mipi_pll(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- uint32_t rval = readl(&ccm->mipi_pll_cfg);
- unsigned int n = ((rval & CCM_MIPI_PLL_CTRL_N_MASK) >> CCM_MIPI_PLL_CTRL_N_SHIFT) + 1;
- unsigned int k = ((rval & CCM_MIPI_PLL_CTRL_K_MASK) >> CCM_MIPI_PLL_CTRL_K_SHIFT) + 1;
- unsigned int m = ((rval & CCM_MIPI_PLL_CTRL_M_MASK) >> CCM_MIPI_PLL_CTRL_M_SHIFT) + 1;
- unsigned int src = clock_get_pll3();
-
- /* Multiply by 1000 after dividing by m to avoid integer overflows */
- return ((src / 1000) * n * k / m) * 1000;
-}
-
-void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz)
-{
- int pll = clock_get_pll6() * 2;
- int div = 1;
-
- while ((pll / div) > hz)
- div++;
-
- writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_PLL6_2X | CCM_DE_CTRL_M(div),
- clk_cfg);
-}
+++ /dev/null
-/*
- * A83 specific clock code
- *
- * (C) Copyright 2007-2012
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/prcm.h>
-#include <asm/arch/sys_proto.h>
-
-#ifdef CONFIG_SPL_BUILD
-void clock_init_safe(void)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- clock_set_pll1(408000000);
- /* enable pll_hsic, default is 480M */
- writel(PLL8_CFG_DEFAULT, &ccm->pll8_cfg);
- writel(readl(&ccm->pll8_cfg) | (0x1 << 31), &ccm->pll8_cfg);
- while (!(readl(&ccm->pll_stable_status) & (1 << 8))) {}
-
- /* switch to default 24MHz before changing to hsic */
- writel(0x0, &ccm->cci400_cfg);
- sdelay(50);
- writel(CCM_CCI400_CLK_SEL_HSIC, &ccm->cci400_cfg);
- sdelay(100);
-
- /* switch before changing pll6 */
- clrsetbits_le32(&ccm->ahb1_apb1_div, AHB1_CLK_SRC_MASK,
- AHB1_CLK_SRC_OSC24M);
- writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
- while (!(readl(&ccm->pll_stable_status) & (1 << 6))) {}
-
- writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
- writel(CCM_MBUS_RESET_RESET, &ccm->mbus_reset);
- writel(MBUS_CLK_DEFAULT, &ccm->mbus_clk_cfg);
-
- /* timestamp */
- writel(1, 0x01720000);
-}
-#endif
-
-void clock_init_uart(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* uart clock source is apb2 */
- writel(APB2_CLK_SRC_OSC24M|
- APB2_CLK_RATE_N_1|
- APB2_CLK_RATE_M(1),
- &ccm->apb2_div);
-
- /* open the clock for uart */
- setbits_le32(&ccm->apb2_gate,
- CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
- CONFIG_CONS_INDEX - 1));
-
- /* deassert uart reset */
- setbits_le32(&ccm->apb2_reset_cfg,
- 1 << (APB2_RESET_UART_SHIFT +
- CONFIG_CONS_INDEX - 1));
-}
-
-#ifdef CONFIG_SPL_BUILD
-void clock_set_pll1(unsigned int clk)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- const int p = 0;
-
- /* Switch to 24MHz clock while changing PLL1 */
- writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
- AXI_DIV_2 << AXI1_DIV_SHIFT |
- CPU_CLK_SRC_OSC24M << C0_CPUX_CLK_SRC_SHIFT |
- CPU_CLK_SRC_OSC24M << C1_CPUX_CLK_SRC_SHIFT,
- &ccm->cpu_axi_cfg);
-
- /* clk = 24*n/p, p is ignored if clock is >288MHz */
- writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
- CCM_PLL1_CTRL_N(clk / 24000000),
- &ccm->pll1_c0_cfg);
- while (!(readl(&ccm->pll_stable_status) & 0x01)) {}
-
- writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
- CCM_PLL1_CTRL_N(clk / (24000000)),
- &ccm->pll1_c1_cfg);
- while (!(readl(&ccm->pll_stable_status) & 0x02)) {}
-
- /* Switch CPU to PLL1 */
- writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
- AXI_DIV_2 << AXI1_DIV_SHIFT |
- CPU_CLK_SRC_PLL1 << C0_CPUX_CLK_SRC_SHIFT |
- CPU_CLK_SRC_PLL1 << C1_CPUX_CLK_SRC_SHIFT,
- &ccm->cpu_axi_cfg);
-}
-#endif
-
-void clock_set_pll5(unsigned int clk)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- unsigned int div1 = 0, div2 = 0;
-
- /* A83T PLL5 DDR rate = 24000000 * (n+1)/(div1+1)/(div2+1) */
- writel(CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD |
- CCM_PLL5_CTRL_N(clk / (24000000)) |
- div2 << CCM_PLL5_DIV2_SHIFT |
- div1 << CCM_PLL5_DIV1_SHIFT, &ccm->pll5_cfg);
-
- udelay(5500);
-}
-
-
-unsigned int clock_get_pll6(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- uint32_t rval = readl(&ccm->pll6_cfg);
- int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
- int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
- CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
- int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
- CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
- return 24000000 * n / div1 / div2;
-}
+++ /dev/null
-/*
- * sun9i specific clock code
- *
- * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/prcm.h>
-#include <asm/arch/sys_proto.h>
-
-void clock_init_uart(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* open the clock for uart */
- setbits_le32(&ccm->apb1_gate,
- CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT +
- CONFIG_CONS_INDEX - 1));
- /* deassert uart reset */
- setbits_le32(&ccm->apb1_reset_cfg,
- 1 << (APB1_RESET_UART_SHIFT +
- CONFIG_CONS_INDEX - 1));
-
- /* Dup with clock_init_safe(), drop once sun9i SPL support lands */
- writel(PLL4_CFG_DEFAULT, &ccm->pll4_periph0_cfg);
-}
-
-int clock_twi_onoff(int port, int state)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- if (port > 4)
- return -1;
-
- /* set the apb reset and clock gate for twi */
- if (state) {
- setbits_le32(&ccm->apb1_gate,
- CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
- setbits_le32(&ccm->apb1_reset_cfg,
- 1 << (APB1_RESET_TWI_SHIFT + port));
- } else {
- clrbits_le32(&ccm->apb1_reset_cfg,
- 1 << (APB1_RESET_TWI_SHIFT + port));
- clrbits_le32(&ccm->apb1_gate,
- CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
- }
-
- return 0;
-}
-
-unsigned int clock_get_pll4_periph0(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- uint32_t rval = readl(&ccm->pll4_periph0_cfg);
- int n = ((rval & CCM_PLL4_CTRL_N_MASK) >> CCM_PLL4_CTRL_N_SHIFT);
- int p = ((rval & CCM_PLL4_CTRL_P_MASK) >> CCM_PLL4_CTRL_P_SHIFT);
- int m = ((rval & CCM_PLL4_CTRL_M_MASK) >> CCM_PLL4_CTRL_M_SHIFT) + 1;
- const int k = 1;
-
- return ((24000000 * n * k) >> p) / m;
-}
+++ /dev/null
-/*
- * (C) Copyright 2007-2011
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/clock.h>
-#include <axp_pmic.h>
-#include <errno.h>
-
-#ifdef CONFIG_MACH_SUN6I
-int sunxi_get_ss_bonding_id(void)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- static int bonding_id = -1;
-
- if (bonding_id != -1)
- return bonding_id;
-
- /* Enable Security System */
- setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_SS);
- setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_SS);
-
- bonding_id = readl(SUNXI_SS_BASE);
- bonding_id = (bonding_id >> 16) & 0x7;
-
- /* Disable Security System again */
- clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_SS);
- clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_SS);
-
- return bonding_id;
-}
-#endif
-
-#ifdef CONFIG_DISPLAY_CPUINFO
-int print_cpuinfo(void)
-{
-#ifdef CONFIG_MACH_SUN4I
- puts("CPU: Allwinner A10 (SUN4I)\n");
-#elif defined CONFIG_MACH_SUN5I
- u32 val = readl(SUNXI_SID_BASE + 0x08);
- switch ((val >> 12) & 0xf) {
- case 0: puts("CPU: Allwinner A12 (SUN5I)\n"); break;
- case 3: puts("CPU: Allwinner A13 (SUN5I)\n"); break;
- case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break;
- default: puts("CPU: Allwinner A1X (SUN5I)\n");
- }
-#elif defined CONFIG_MACH_SUN6I
- switch (sunxi_get_ss_bonding_id()) {
- case SUNXI_SS_BOND_ID_A31:
- puts("CPU: Allwinner A31 (SUN6I)\n");
- break;
- case SUNXI_SS_BOND_ID_A31S:
- puts("CPU: Allwinner A31s (SUN6I)\n");
- break;
- default:
- printf("CPU: Allwinner A31? (SUN6I, id: %d)\n",
- sunxi_get_ss_bonding_id());
- }
-#elif defined CONFIG_MACH_SUN7I
- puts("CPU: Allwinner A20 (SUN7I)\n");
-#elif defined CONFIG_MACH_SUN8I_A23
- puts("CPU: Allwinner A23 (SUN8I)\n");
-#elif defined CONFIG_MACH_SUN8I_A33
- puts("CPU: Allwinner A33 (SUN8I)\n");
-#elif defined CONFIG_MACH_SUN8I_H3
- puts("CPU: Allwinner H3 (SUN8I)\n");
-#elif defined CONFIG_MACH_SUN9I
- puts("CPU: Allwinner A80 (SUN9I)\n");
-#elif defined CONFIG_MACH_SUN8I_A83T
- puts("CPU: Allwinner A83T (SUN8I)\n");
-#else
-#warning Please update cpu_info.c with correct CPU information
- puts("CPU: SUNXI Family\n");
-#endif
- return 0;
-}
-#endif
-
-int sunxi_get_sid(unsigned int *sid)
-{
-#ifdef CONFIG_AXP221_POWER
- return axp_get_sid(sid);
-#elif defined SUNXI_SID_BASE
- int i;
-
- for (i = 0; i< 4; i++)
- sid[i] = readl(SUNXI_SID_BASE + 4 * i);
-
- return 0;
-#else
- return -ENODEV;
-#endif
-}
+++ /dev/null
-/*
- * DRAM init helper functions
- *
- * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/dram.h>
-
-/*
- * Wait up to 1s for value to be set in given part of reg.
- */
-void mctl_await_completion(u32 *reg, u32 mask, u32 val)
-{
- unsigned long tmo = timer_get_us() + 1000000;
-
- while ((readl(reg) & mask) != val) {
- if (timer_get_us() > tmo)
- panic("Timeout initialising DRAM\n");
- }
-}
-
-/*
- * Test if memory at offset offset matches memory at begin of DRAM
- */
-bool mctl_mem_matches(u32 offset)
-{
- /* Try to write different values to RAM at two addresses */
- writel(0, CONFIG_SYS_SDRAM_BASE);
- writel(0xaa55aa55, CONFIG_SYS_SDRAM_BASE + offset);
- /* Check if the same value is actually observed when reading back */
- return readl(CONFIG_SYS_SDRAM_BASE) ==
- readl(CONFIG_SYS_SDRAM_BASE + offset);
-}
+++ /dev/null
-/*
- * sunxi DRAM controller initialization
- * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
- * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
- *
- * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c
- * and earlier U-Boot Allwiner A10 SPL work
- *
- * (C) Copyright 2007-2012
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Berg Xing <bergxing@allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Unfortunately the only documentation we have on the sun7i DRAM
- * controller is Allwinner boot0 + boot1 code, and that code uses
- * magic numbers & shifts with no explanations. Hence this code is
- * rather undocumented and full of magic.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dram.h>
-#include <asm/arch/timer.h>
-#include <asm/arch/sys_proto.h>
-
-#define CPU_CFG_CHIP_VER(n) ((n) << 6)
-#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3)
-#define CPU_CFG_CHIP_REV_A 0x0
-#define CPU_CFG_CHIP_REV_C1 0x1
-#define CPU_CFG_CHIP_REV_C2 0x2
-#define CPU_CFG_CHIP_REV_B 0x3
-
-/*
- * Wait up to 1s for mask to be clear in given reg.
- */
-static inline void await_bits_clear(u32 *reg, u32 mask)
-{
- mctl_await_completion(reg, mask, 0);
-}
-
-/*
- * Wait up to 1s for mask to be set in given reg.
- */
-static inline void await_bits_set(u32 *reg, u32 mask)
-{
- mctl_await_completion(reg, mask, mask);
-}
-
-/*
- * This performs the external DRAM reset by driving the RESET pin low and
- * then high again. According to the DDR3 spec, the RESET pin needs to be
- * kept low for at least 200 us.
- */
-static void mctl_ddr3_reset(void)
-{
- struct sunxi_dram_reg *dram =
- (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
-#ifdef CONFIG_MACH_SUN4I
- struct sunxi_timer_reg *timer =
- (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
- u32 reg_val;
-
- writel(0, &timer->cpu_cfg);
- reg_val = readl(&timer->cpu_cfg);
-
- if ((reg_val & CPU_CFG_CHIP_VER_MASK) !=
- CPU_CFG_CHIP_VER(CPU_CFG_CHIP_REV_A)) {
- setbits_le32(&dram->mcr, DRAM_MCR_RESET);
- udelay(200);
- clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
- } else
-#endif
- {
- clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
- udelay(200);
- setbits_le32(&dram->mcr, DRAM_MCR_RESET);
- }
- /* After the RESET pin is de-asserted, the DDR3 spec requires to wait
- * for additional 500 us before driving the CKE pin (Clock Enable)
- * high. The duration of this delay can be configured in the SDR_IDCR
- * (Initialization Delay Configuration Register) and applied
- * automatically by the DRAM controller during the DDR3 initialization
- * step. But SDR_IDCR has limited range on sun4i/sun5i hardware and
- * can't provide sufficient delay at DRAM clock frequencies higher than
- * 524 MHz (while Allwinner A13 supports DRAM clock frequency up to
- * 533 MHz according to the datasheet). Additionally, there is no
- * official documentation for the SDR_IDCR register anywhere, and
- * there is always a chance that we are interpreting it wrong.
- * Better be safe than sorry, so add an explicit delay here. */
- udelay(500);
-}
-
-static void mctl_set_drive(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
-#ifdef CONFIG_MACH_SUN7I
- clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
-#else
- clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3),
-#endif
- DRAM_MCR_MODE_EN(0x3) |
- 0xffc);
-}
-
-static void mctl_itm_disable(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
- clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF);
-}
-
-static void mctl_itm_enable(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
- clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF);
-}
-
-static void mctl_itm_reset(void)
-{
- mctl_itm_disable();
- udelay(1); /* ITM reset needs a bit of delay */
- mctl_itm_enable();
- udelay(1);
-}
-
-static void mctl_enable_dll0(u32 phase)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
- clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
- ((phase >> 16) & 0x3f) << 6);
- clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE);
- udelay(2);
-
- clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE);
- udelay(22);
-
- clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET);
- udelay(22);
-}
-
-/* Get the number of DDR byte lanes */
-static u32 mctl_get_number_of_lanes(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- if ((readl(&dram->dcr) & DRAM_DCR_BUS_WIDTH_MASK) ==
- DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT))
- return 4;
- else
- return 2;
-}
-
-/*
- * Note: This differs from pm/standby in that it checks the bus width
- */
-static void mctl_enable_dllx(u32 phase)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 i, number_of_lanes;
-
- number_of_lanes = mctl_get_number_of_lanes();
-
- for (i = 1; i <= number_of_lanes; i++) {
- clrsetbits_le32(&dram->dllcr[i], 0xf << 14,
- (phase & 0xf) << 14);
- clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET,
- DRAM_DLLCR_DISABLE);
- phase >>= 4;
- }
- udelay(2);
-
- for (i = 1; i <= number_of_lanes; i++)
- clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET |
- DRAM_DLLCR_DISABLE);
- udelay(22);
-
- for (i = 1; i <= number_of_lanes; i++)
- clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE,
- DRAM_DLLCR_NRESET);
- udelay(22);
-}
-
-static u32 hpcr_value[32] = {
-#ifdef CONFIG_MACH_SUN5I
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0x1031, 0x1031, 0x0735, 0x1035,
- 0x1035, 0x0731, 0x1031, 0,
- 0x0301, 0x0301, 0x0301, 0x0301,
- 0x0301, 0x0301, 0x0301, 0
-#endif
-#ifdef CONFIG_MACH_SUN4I
- 0x0301, 0x0301, 0x0301, 0x0301,
- 0x0301, 0x0301, 0, 0,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0x1031, 0x1031, 0x0735, 0x5031,
- 0x1035, 0x0731, 0x1031, 0x0735,
- 0x1035, 0x1031, 0x0731, 0x1035,
- 0x1031, 0x0301, 0x0301, 0x0731
-#endif
-#ifdef CONFIG_MACH_SUN7I
- 0x0301, 0x0301, 0x0301, 0x0301,
- 0x0301, 0x0301, 0x0301, 0x0301,
- 0, 0, 0, 0,
- 0, 0, 0, 0,
- 0x1031, 0x1031, 0x0735, 0x1035,
- 0x1035, 0x0731, 0x1031, 0x0735,
- 0x1035, 0x1031, 0x0731, 0x1035,
- 0x0001, 0x1031, 0, 0x1031
- /* last row differs from boot0 source table
- * 0x1031, 0x0301, 0x0301, 0x0731
- * but boot0 code skips #28 and #30, and sets #29 and #31 to the
- * value from #28 entry (0x1031)
- */
-#endif
-};
-
-static void mctl_configure_hostport(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 i;
-
- for (i = 0; i < 32; i++)
- writel(hpcr_value[i], &dram->hpcr[i]);
-}
-
-static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk)
-{
- u32 reg_val;
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- u32 pll5p_clk, pll6x_clk;
- u32 pll5p_div, pll6x_div;
- u32 pll5p_rate, pll6x_rate;
-
- /* setup DRAM PLL */
- reg_val = readl(&ccm->pll5_cfg);
- reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */
- reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */
- reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */
- reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */
-#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
- /* Old kernels are hardcoded to P=1 (divide by 2) */
- reg_val |= CCM_PLL5_CTRL_P(1);
-#endif
- if (clk >= 540 && clk < 552) {
- /* dram = 540MHz */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
- } else if (clk >= 512 && clk < 528) {
- /* dram = 512MHz */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
- } else if (clk >= 496 && clk < 504) {
- /* dram = 496MHz */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
- } else if (clk >= 468 && clk < 480) {
- /* dram = 468MHz */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
- } else if (clk >= 396 && clk < 408) {
- /* dram = 396MHz */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
- } else {
- /* any other frequency that is a multiple of 24 */
- reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
- reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
- reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24));
- }
- reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */
- reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */
- writel(reg_val, &ccm->pll5_cfg);
- udelay(5500);
-
- setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK);
-
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
- /* reset GPS */
- clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE);
- setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
- udelay(1);
- clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
-#endif
-
- /* setup MBUS clock */
- if (!mbus_clk)
- mbus_clk = 300;
-
- /* PLL5P and PLL6 are the potential clock sources for MBUS */
- pll6x_clk = clock_get_pll6() / 1000000;
-#ifdef CONFIG_MACH_SUN7I
- pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */
-#endif
- pll5p_clk = clock_get_pll5p() / 1000000;
- pll6x_div = DIV_ROUND_UP(pll6x_clk, mbus_clk);
- pll5p_div = DIV_ROUND_UP(pll5p_clk, mbus_clk);
- pll6x_rate = pll6x_clk / pll6x_div;
- pll5p_rate = pll5p_clk / pll5p_div;
-
- if (pll6x_div <= 16 && pll6x_rate > pll5p_rate) {
- /* use PLL6 as the MBUS clock source */
- reg_val = CCM_MBUS_CTRL_GATE |
- CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
- CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
- CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(pll6x_div));
- } else if (pll5p_div <= 16) {
- /* use PLL5P as the MBUS clock source */
- reg_val = CCM_MBUS_CTRL_GATE |
- CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) |
- CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
- CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(pll5p_div));
- } else {
- panic("Bad mbus_clk\n");
- }
- writel(reg_val, &ccm->mbus_clk_cfg);
-
- /*
- * open DRAMC AHB & DLL register clock
- * close it first
- */
-#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
- clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
-#else
- clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
-#endif
- udelay(22);
-
- /* then open it */
-#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
- setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
-#else
- setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
-#endif
- udelay(22);
-}
-
-/*
- * The data from rslrX and rdgrX registers (X=rank) is stored
- * in a single 32-bit value using the following format:
- * bits [31:26] - DQS gating system latency for byte lane 3
- * bits [25:24] - DQS gating phase select for byte lane 3
- * bits [23:18] - DQS gating system latency for byte lane 2
- * bits [17:16] - DQS gating phase select for byte lane 2
- * bits [15:10] - DQS gating system latency for byte lane 1
- * bits [ 9:8 ] - DQS gating phase select for byte lane 1
- * bits [ 7:2 ] - DQS gating system latency for byte lane 0
- * bits [ 1:0 ] - DQS gating phase select for byte lane 0
- */
-static void mctl_set_dqs_gating_delay(int rank, u32 dqs_gating_delay)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 lane, number_of_lanes = mctl_get_number_of_lanes();
- /* rank0 gating system latency (3 bits per lane: cycles) */
- u32 slr = readl(rank == 0 ? &dram->rslr0 : &dram->rslr1);
- /* rank0 gating phase select (2 bits per lane: 90, 180, 270, 360) */
- u32 dgr = readl(rank == 0 ? &dram->rdgr0 : &dram->rdgr1);
- for (lane = 0; lane < number_of_lanes; lane++) {
- u32 tmp = dqs_gating_delay >> (lane * 8);
- slr &= ~(7 << (lane * 3));
- slr |= ((tmp >> 2) & 7) << (lane * 3);
- dgr &= ~(3 << (lane * 2));
- dgr |= (tmp & 3) << (lane * 2);
- }
- writel(slr, rank == 0 ? &dram->rslr0 : &dram->rslr1);
- writel(dgr, rank == 0 ? &dram->rdgr0 : &dram->rdgr1);
-}
-
-static int dramc_scan_readpipe(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 reg_val;
-
- /* data training trigger */
- clrbits_le32(&dram->csr, DRAM_CSR_FAILED);
- setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING);
-
- /* check whether data training process has completed */
- await_bits_clear(&dram->ccr, DRAM_CCR_DATA_TRAINING);
-
- /* check data training result */
- reg_val = readl(&dram->csr);
- if (reg_val & DRAM_CSR_FAILED)
- return -1;
-
- return 0;
-}
-
-static void dramc_clock_output_en(u32 on)
-{
-#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
- if (on)
- setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
- else
- clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
-#endif
-#ifdef CONFIG_MACH_SUN4I
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- if (on)
- setbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT);
- else
- clrbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT);
-#endif
-}
-
-/* tRFC in nanoseconds for different densities (from the DDR3 spec) */
-static const u16 tRFC_DDR3_table[6] = {
- /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */
- 90, 90, 110, 160, 300, 350
-};
-
-static void dramc_set_autorefresh_cycle(u32 clk, u32 density)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 tRFC, tREFI;
-
- tRFC = (tRFC_DDR3_table[density] * clk + 999) / 1000;
- tREFI = (7987 * clk) >> 10; /* <= 7.8us */
-
- writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr);
-}
-
-/* Calculate the value for A11, A10, A9 bits in MR0 (write recovery) */
-static u32 ddr3_write_recovery(u32 clk)
-{
- u32 twr_ns = 15; /* DDR3 spec says that it is 15ns for all speed bins */
- u32 twr_ck = (twr_ns * clk + 999) / 1000;
- if (twr_ck < 5)
- return 1;
- else if (twr_ck <= 8)
- return twr_ck - 4;
- else if (twr_ck <= 10)
- return 5;
- else
- return 6;
-}
-
-/*
- * If the dram->ppwrsctl (SDR_DPCR) register has the lowest bit set to 1, this
- * means that DRAM is currently in self-refresh mode and retaining the old
- * data. Since we have no idea what to do in this situation yet, just set this
- * register to 0 and initialize DRAM in the same way as on any normal reboot
- * (discarding whatever was stored there).
- *
- * Note: on sun7i hardware, the highest 16 bits need to be set to 0x1651 magic
- * value for this write operation to have any effect. On sun5i hadware this
- * magic value is not necessary. And on sun4i hardware the writes to this
- * register seem to have no effect at all.
- */
-static void mctl_disable_power_save(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- writel(0x16510000, &dram->ppwrsctl);
-}
-
-/*
- * After the DRAM is powered up or reset, the DDR3 spec requires to wait at
- * least 500 us before driving the CKE pin (Clock Enable) high. The dram->idct
- * (SDR_IDCR) register appears to configure this delay, which gets applied
- * right at the time when the DRAM initialization is activated in the
- * 'mctl_ddr3_initialize' function.
- */
-static void mctl_set_cke_delay(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
-
- /* The CKE delay is represented in DRAM clock cycles, multiplied by N
- * (where N=2 for sun4i/sun5i and N=3 for sun7i). Here it is set to
- * the maximum possible value 0x1ffff, just like in the Allwinner's
- * boot0 bootloader. The resulting delay value is somewhere between
- * ~0.4 ms (sun5i with 648 MHz DRAM clock speed) and ~1.1 ms (sun7i
- * with 360 MHz DRAM clock speed). */
- setbits_le32(&dram->idcr, 0x1ffff);
-}
-
-/*
- * This triggers the DRAM initialization. It performs sending the mode registers
- * to the DRAM among other things. Very likely the ZQCL command is also getting
- * executed (to do the initial impedance calibration on the DRAM side of the
- * wire). The memory controller and the PHY must be already configured before
- * calling this function.
- */
-static void mctl_ddr3_initialize(void)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- setbits_le32(&dram->ccr, DRAM_CCR_INIT);
- await_bits_clear(&dram->ccr, DRAM_CCR_INIT);
-}
-
-/*
- * Perform impedance calibration on the DRAM controller side of the wire.
- */
-static void mctl_set_impedance(u32 zq, bool odt_en)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 reg_val;
- u32 zprog = zq & 0xFF, zdata = (zq >> 8) & 0xFFFFF;
-
-#ifndef CONFIG_MACH_SUN7I
- /* Appears that some kind of automatically initiated default
- * ZQ calibration is already in progress at this point on sun4i/sun5i
- * hardware, but not on sun7i. So it is reasonable to wait for its
- * completion before doing anything else. */
- await_bits_set(&dram->zqsr, DRAM_ZQSR_ZDONE);
-#endif
-
- /* ZQ calibration is not really useful unless ODT is enabled */
- if (!odt_en)
- return;
-
-#ifdef CONFIG_MACH_SUN7I
- /* Enabling ODT in SDR_IOCR on sun7i hardware results in a deadlock
- * unless bit 24 is set in SDR_ZQCR1. Not much is known about the
- * SDR_ZQCR1 register, but there are hints indicating that it might
- * be related to periodic impedance re-calibration. This particular
- * magic value is borrowed from the Allwinner boot0 bootloader, and
- * using it helps to avoid troubles */
- writel((1 << 24) | (1 << 1), &dram->zqcr1);
-#endif
-
- /* Needed at least for sun5i, because it does not self clear there */
- clrbits_le32(&dram->zqcr0, DRAM_ZQCR0_ZCAL);
-
- if (zdata) {
- /* Set the user supplied impedance data */
- reg_val = DRAM_ZQCR0_ZDEN | zdata;
- writel(reg_val, &dram->zqcr0);
- /* no need to wait, this takes effect immediately */
- } else {
- /* Do the calibration using the external resistor */
- reg_val = DRAM_ZQCR0_ZCAL | DRAM_ZQCR0_IMP_DIV(zprog);
- writel(reg_val, &dram->zqcr0);
- /* Wait for the new impedance configuration to settle */
- await_bits_set(&dram->zqsr, DRAM_ZQSR_ZDONE);
- }
-
- /* Needed at least for sun5i, because it does not self clear there */
- clrbits_le32(&dram->zqcr0, DRAM_ZQCR0_ZCAL);
-
- /* Set I/O configure register */
- writel(DRAM_IOCR_ODT_EN, &dram->iocr);
-}
-
-static unsigned long dramc_init_helper(struct dram_para *para)
-{
- struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
- u32 reg_val;
- u32 density;
- int ret_val;
-
- /*
- * only single rank DDR3 is supported by this code even though the
- * hardware can theoretically support DDR2 and up to two ranks
- */
- if (para->type != DRAM_MEMORY_TYPE_DDR3 || para->rank_num != 1)
- return 0;
-
- /* setup DRAM relative clock */
- mctl_setup_dram_clock(para->clock, para->mbus_clock);
-
- /* Disable any pad power save control */
- mctl_disable_power_save();
-
- mctl_set_drive();
-
- /* dram clock off */
- dramc_clock_output_en(0);
-
-#ifdef CONFIG_MACH_SUN4I
- /* select dram controller 1 */
- writel(DRAM_CSEL_MAGIC, &dram->csel);
-#endif
-
- mctl_itm_disable();
- mctl_enable_dll0(para->tpr3);
-
- /* configure external DRAM */
- reg_val = DRAM_DCR_TYPE_DDR3;
- reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3);
-
- if (para->density == 256)
- density = DRAM_DCR_CHIP_DENSITY_256M;
- else if (para->density == 512)
- density = DRAM_DCR_CHIP_DENSITY_512M;
- else if (para->density == 1024)
- density = DRAM_DCR_CHIP_DENSITY_1024M;
- else if (para->density == 2048)
- density = DRAM_DCR_CHIP_DENSITY_2048M;
- else if (para->density == 4096)
- density = DRAM_DCR_CHIP_DENSITY_4096M;
- else if (para->density == 8192)
- density = DRAM_DCR_CHIP_DENSITY_8192M;
- else
- density = DRAM_DCR_CHIP_DENSITY_256M;
-
- reg_val |= DRAM_DCR_CHIP_DENSITY(density);
- reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1);
- reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
- reg_val |= DRAM_DCR_CMD_RANK_ALL;
- reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
- writel(reg_val, &dram->dcr);
-
- dramc_clock_output_en(1);
-
- mctl_set_impedance(para->zq, para->odt_en);
-
- mctl_set_cke_delay();
-
- mctl_ddr3_reset();
-
- udelay(1);
-
- await_bits_clear(&dram->ccr, DRAM_CCR_INIT);
-
- mctl_enable_dllx(para->tpr3);
-
- /* set refresh period */
- dramc_set_autorefresh_cycle(para->clock, density);
-
- /* set timing parameters */
- writel(para->tpr0, &dram->tpr0);
- writel(para->tpr1, &dram->tpr1);
- writel(para->tpr2, &dram->tpr2);
-
- reg_val = DRAM_MR_BURST_LENGTH(0x0);
-#if (defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I))
- reg_val |= DRAM_MR_POWER_DOWN;
-#endif
- reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
- reg_val |= DRAM_MR_WRITE_RECOVERY(ddr3_write_recovery(para->clock));
- writel(reg_val, &dram->mr);
-
- writel(para->emr1, &dram->emr);
- writel(para->emr2, &dram->emr2);
- writel(para->emr3, &dram->emr3);
-
- /* disable drift compensation and set passive DQS window mode */
- clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
-
-#ifdef CONFIG_MACH_SUN7I
- /* Command rate timing mode 2T & 1T */
- if (para->tpr4 & 0x1)
- setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T);
-#endif
- /* initialize external DRAM */
- mctl_ddr3_initialize();
-
- /* scan read pipe value */
- mctl_itm_enable();
-
- /* Hardware DQS gate training */
- ret_val = dramc_scan_readpipe();
-
- if (ret_val < 0)
- return 0;
-
- /* allow to override the DQS training results with a custom delay */
- if (para->dqs_gating_delay)
- mctl_set_dqs_gating_delay(0, para->dqs_gating_delay);
-
- /* set the DQS gating window type */
- if (para->active_windowing)
- clrbits_le32(&dram->ccr, DRAM_CCR_DQS_GATE);
- else
- setbits_le32(&dram->ccr, DRAM_CCR_DQS_GATE);
-
- mctl_itm_reset();
-
- /* configure all host port */
- mctl_configure_hostport();
-
- return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
-}
-
-unsigned long dramc_init(struct dram_para *para)
-{
- unsigned long dram_size, actual_density;
-
- /* If the dram configuration is not provided, use a default */
- if (!para)
- return 0;
-
- /* if everything is known, then autodetection is not necessary */
- if (para->io_width && para->bus_width && para->density)
- return dramc_init_helper(para);
-
- /* try to autodetect the DRAM bus width and density */
- para->io_width = 16;
- para->bus_width = 32;
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I)
- /* only A0-A14 address lines on A10/A13, limiting max density to 4096 */
- para->density = 4096;
-#else
- /* all A0-A15 address lines on A20, which allow density 8192 */
- para->density = 8192;
-#endif
-
- dram_size = dramc_init_helper(para);
- if (!dram_size) {
- /* if 32-bit bus width failed, try 16-bit bus width instead */
- para->bus_width = 16;
- dram_size = dramc_init_helper(para);
- if (!dram_size) {
- /* if 16-bit bus width also failed, then bail out */
- return dram_size;
- }
- }
-
- /* check if we need to adjust the density */
- actual_density = (dram_size >> 17) * para->io_width / para->bus_width;
-
- if (actual_density != para->density) {
- /* update the density and re-initialize DRAM again */
- para->density = actual_density;
- dram_size = dramc_init_helper(para);
- }
-
- return dram_size;
-}
+++ /dev/null
-/*
- * Sun6i platform dram controller init.
- *
- * (C) Copyright 2007-2012
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Berg Xing <bergxing@allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dram.h>
-#include <asm/arch/prcm.h>
-
-#define DRAM_CLK (CONFIG_DRAM_CLK * 1000000)
-
-struct dram_sun6i_para {
- u8 bus_width;
- u8 chan;
- u8 rank;
- u8 rows;
- u16 page_size;
-};
-
-static void mctl_sys_init(void)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- const int dram_clk_div = 2;
-
- clock_set_pll5(DRAM_CLK * dram_clk_div, false);
-
- clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV0_MASK,
- CCM_DRAMCLK_CFG_DIV0(dram_clk_div) | CCM_DRAMCLK_CFG_RST |
- CCM_DRAMCLK_CFG_UPD);
- mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
-
- writel(MDFS_CLK_DEFAULT, &ccm->mdfs_clk_cfg);
-
- /* deassert mctl reset */
- setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
-
- /* enable mctl clock */
- setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
-}
-
-static void mctl_dll_init(int ch_index, struct dram_sun6i_para *para)
-{
- struct sunxi_mctl_phy_reg *mctl_phy;
-
- if (ch_index == 0)
- mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
- else
- mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
-
- /* disable + reset dlls */
- writel(MCTL_DLLCR_DISABLE, &mctl_phy->acdllcr);
- writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx0dllcr);
- writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx1dllcr);
- if (para->bus_width == 32) {
- writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx2dllcr);
- writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx3dllcr);
- }
- udelay(2);
-
- /* enable + reset dlls */
- writel(0, &mctl_phy->acdllcr);
- writel(0, &mctl_phy->dx0dllcr);
- writel(0, &mctl_phy->dx1dllcr);
- if (para->bus_width == 32) {
- writel(0, &mctl_phy->dx2dllcr);
- writel(0, &mctl_phy->dx3dllcr);
- }
- udelay(22);
-
- /* enable and release reset of dlls */
- writel(MCTL_DLLCR_NRESET, &mctl_phy->acdllcr);
- writel(MCTL_DLLCR_NRESET, &mctl_phy->dx0dllcr);
- writel(MCTL_DLLCR_NRESET, &mctl_phy->dx1dllcr);
- if (para->bus_width == 32) {
- writel(MCTL_DLLCR_NRESET, &mctl_phy->dx2dllcr);
- writel(MCTL_DLLCR_NRESET, &mctl_phy->dx3dllcr);
- }
- udelay(22);
-}
-
-static bool mctl_rank_detect(u32 *gsr0, int rank)
-{
- const u32 done = MCTL_DX_GSR0_RANK0_TRAIN_DONE << rank;
- const u32 err = MCTL_DX_GSR0_RANK0_TRAIN_ERR << rank;
-
- mctl_await_completion(gsr0, done, done);
- mctl_await_completion(gsr0 + 0x10, done, done);
-
- return !(readl(gsr0) & err) && !(readl(gsr0 + 0x10) & err);
-}
-
-static void mctl_channel_init(int ch_index, struct dram_sun6i_para *para)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- struct sunxi_mctl_ctl_reg *mctl_ctl;
- struct sunxi_mctl_phy_reg *mctl_phy;
-
- if (ch_index == 0) {
- mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
- mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
- } else {
- mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL1_BASE;
- mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
- }
-
- writel(MCTL_MCMD_NOP, &mctl_ctl->mcmd);
- mctl_await_completion(&mctl_ctl->mcmd, MCTL_MCMD_BUSY, 0);
-
- /* PHY initialization */
- writel(MCTL_PGCR, &mctl_phy->pgcr);
- writel(MCTL_MR0, &mctl_phy->mr0);
- writel(MCTL_MR1, &mctl_phy->mr1);
- writel(MCTL_MR2, &mctl_phy->mr2);
- writel(MCTL_MR3, &mctl_phy->mr3);
-
- writel((MCTL_TITMSRST << 18) | (MCTL_TDLLLOCK << 6) | MCTL_TDLLSRST,
- &mctl_phy->ptr0);
-
- writel((MCTL_TDINIT1 << 19) | MCTL_TDINIT0, &mctl_phy->ptr1);
- writel((MCTL_TDINIT3 << 17) | MCTL_TDINIT2, &mctl_phy->ptr2);
-
- writel((MCTL_TCCD << 31) | (MCTL_TRC << 25) | (MCTL_TRRD << 21) |
- (MCTL_TRAS << 16) | (MCTL_TRCD << 12) | (MCTL_TRP << 8) |
- (MCTL_TWTR << 5) | (MCTL_TRTP << 2) | (MCTL_TMRD << 0),
- &mctl_phy->dtpr0);
-
- writel((MCTL_TDQSCKMAX << 27) | (MCTL_TDQSCK << 24) |
- (MCTL_TRFC << 16) | (MCTL_TRTODT << 11) |
- ((MCTL_TMOD - 12) << 9) | (MCTL_TFAW << 3) | (0 << 2) |
- (MCTL_TAOND << 0), &mctl_phy->dtpr1);
-
- writel((MCTL_TDLLK << 19) | (MCTL_TCKE << 15) | (MCTL_TXPDLL << 10) |
- (MCTL_TEXSR << 0), &mctl_phy->dtpr2);
-
- writel(1, &mctl_ctl->dfitphyupdtype0);
- writel(MCTL_DCR_DDR3, &mctl_phy->dcr);
- writel(MCTL_DSGCR, &mctl_phy->dsgcr);
- writel(MCTL_DXCCR, &mctl_phy->dxccr);
- writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx0gcr);
- writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx1gcr);
- writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx2gcr);
- writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx3gcr);
-
- mctl_await_completion(&mctl_phy->pgsr, 0x03, 0x03);
-
- writel(CONFIG_DRAM_ZQ, &mctl_phy->zq0cr1);
-
- setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS);
- writel(MCTL_PIR_STEP1, &mctl_phy->pir);
- udelay(10);
- mctl_await_completion(&mctl_phy->pgsr, 0x1f, 0x1f);
-
- /* rank detect */
- if (!mctl_rank_detect(&mctl_phy->dx0gsr0, 1)) {
- para->rank = 1;
- clrbits_le32(&mctl_phy->pgcr, MCTL_PGCR_RANK);
- }
-
- /*
- * channel detect, check channel 1 dx0 and dx1 have rank 0, if not
- * assume nothing is connected to channel 1.
- */
- if (ch_index == 1 && !mctl_rank_detect(&mctl_phy->dx0gsr0, 0)) {
- para->chan = 1;
- clrbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN);
- return;
- }
-
- /* bus width detect, if dx2 and dx3 don't have rank 0, assume 16 bit */
- if (!mctl_rank_detect(&mctl_phy->dx2gsr0, 0)) {
- para->bus_width = 16;
- para->page_size = 2048;
- setbits_le32(&mctl_phy->dx2dllcr, MCTL_DLLCR_DISABLE);
- setbits_le32(&mctl_phy->dx3dllcr, MCTL_DLLCR_DISABLE);
- clrbits_le32(&mctl_phy->dx2gcr, MCTL_DX_GCR_EN);
- clrbits_le32(&mctl_phy->dx3gcr, MCTL_DX_GCR_EN);
- }
-
- setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS);
- writel(MCTL_PIR_STEP2, &mctl_phy->pir);
- udelay(10);
- mctl_await_completion(&mctl_phy->pgsr, 0x11, 0x11);
-
- if (readl(&mctl_phy->pgsr) & MCTL_PGSR_TRAIN_ERR_MASK)
- panic("Training error initialising DRAM\n");
-
- /* Move to configure state */
- writel(MCTL_SCTL_CONFIG, &mctl_ctl->sctl);
- mctl_await_completion(&mctl_ctl->sstat, 0x07, 0x01);
-
- /* Set number of clks per micro-second */
- writel(DRAM_CLK / 1000000, &mctl_ctl->togcnt1u);
- /* Set number of clks per 100 nano-seconds */
- writel(DRAM_CLK / 10000000, &mctl_ctl->togcnt100n);
- /* Set memory timing registers */
- writel(MCTL_TREFI, &mctl_ctl->trefi);
- writel(MCTL_TMRD, &mctl_ctl->tmrd);
- writel(MCTL_TRFC, &mctl_ctl->trfc);
- writel((MCTL_TPREA << 16) | MCTL_TRP, &mctl_ctl->trp);
- writel(MCTL_TRTW, &mctl_ctl->trtw);
- writel(MCTL_TAL, &mctl_ctl->tal);
- writel(MCTL_TCL, &mctl_ctl->tcl);
- writel(MCTL_TCWL, &mctl_ctl->tcwl);
- writel(MCTL_TRAS, &mctl_ctl->tras);
- writel(MCTL_TRC, &mctl_ctl->trc);
- writel(MCTL_TRCD, &mctl_ctl->trcd);
- writel(MCTL_TRRD, &mctl_ctl->trrd);
- writel(MCTL_TRTP, &mctl_ctl->trtp);
- writel(MCTL_TWR, &mctl_ctl->twr);
- writel(MCTL_TWTR, &mctl_ctl->twtr);
- writel(MCTL_TEXSR, &mctl_ctl->texsr);
- writel(MCTL_TXP, &mctl_ctl->txp);
- writel(MCTL_TXPDLL, &mctl_ctl->txpdll);
- writel(MCTL_TZQCS, &mctl_ctl->tzqcs);
- writel(MCTL_TZQCSI, &mctl_ctl->tzqcsi);
- writel(MCTL_TDQS, &mctl_ctl->tdqs);
- writel(MCTL_TCKSRE, &mctl_ctl->tcksre);
- writel(MCTL_TCKSRX, &mctl_ctl->tcksrx);
- writel(MCTL_TCKE, &mctl_ctl->tcke);
- writel(MCTL_TMOD, &mctl_ctl->tmod);
- writel(MCTL_TRSTL, &mctl_ctl->trstl);
- writel(MCTL_TZQCL, &mctl_ctl->tzqcl);
- writel(MCTL_TMRR, &mctl_ctl->tmrr);
- writel(MCTL_TCKESR, &mctl_ctl->tckesr);
- writel(MCTL_TDPD, &mctl_ctl->tdpd);
-
- /* Unknown magic performed by boot0 */
- setbits_le32(&mctl_ctl->dfiodtcfg, 1 << 3);
- clrbits_le32(&mctl_ctl->dfiodtcfg1, 0x1f);
-
- /* Select 16/32-bits mode for MCTL */
- if (para->bus_width == 16)
- setbits_le32(&mctl_ctl->ppcfg, 1);
-
- /* Set DFI timing registers */
- writel(MCTL_TCWL, &mctl_ctl->dfitphywrl);
- writel(MCTL_TCL - 1, &mctl_ctl->dfitrdden);
- writel(MCTL_DFITPHYRDL, &mctl_ctl->dfitphyrdl);
- writel(MCTL_DFISTCFG0, &mctl_ctl->dfistcfg0);
-
- writel(MCTL_MCFG_DDR3, &mctl_ctl->mcfg);
-
- /* DFI update configuration register */
- writel(MCTL_DFIUPDCFG_UPD, &mctl_ctl->dfiupdcfg);
-
- /* Move to access state */
- writel(MCTL_SCTL_ACCESS, &mctl_ctl->sctl);
- mctl_await_completion(&mctl_ctl->sstat, 0x07, 0x03);
-}
-
-static void mctl_com_init(struct dram_sun6i_para *para)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- struct sunxi_mctl_phy_reg * const mctl_phy1 =
- (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
- struct sunxi_prcm_reg * const prcm =
- (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
-
- writel(MCTL_CR_UNKNOWN | MCTL_CR_CHANNEL(para->chan) | MCTL_CR_DDR3 |
- ((para->bus_width == 32) ? MCTL_CR_BUSW32 : MCTL_CR_BUSW16) |
- MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
- MCTL_CR_BANK(1) | MCTL_CR_RANK(para->rank), &mctl_com->cr);
-
- /* Unknown magic performed by boot0 */
- setbits_le32(&mctl_com->dbgcr, (1 << 6));
-
- if (para->chan == 1) {
- /* Shutdown channel 1 */
- setbits_le32(&mctl_phy1->aciocr, MCTL_ACIOCR_DISABLE);
- setbits_le32(&mctl_phy1->dxccr, MCTL_DXCCR_DISABLE);
- clrbits_le32(&mctl_phy1->dsgcr, MCTL_DSGCR_ENABLE);
- /*
- * CH0 ?? this is what boot0 does. Leave as is until we can
- * confirm this.
- */
- setbits_le32(&prcm->vdd_sys_pwroff,
- PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF);
- }
-}
-
-static void mctl_port_cfg(void)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* enable DRAM AXI clock for CPU access */
- setbits_le32(&ccm->axi_gate, 1 << AXI_GATE_OFFSET_DRAM);
-
- /* Bunch of magic writes performed by boot0 */
- writel(0x00400302, &mctl_com->rmcr[0]);
- writel(0x01000307, &mctl_com->rmcr[1]);
- writel(0x00400302, &mctl_com->rmcr[2]);
- writel(0x01000307, &mctl_com->rmcr[3]);
- writel(0x01000307, &mctl_com->rmcr[4]);
- writel(0x01000303, &mctl_com->rmcr[6]);
- writel(0x01000303, &mctl_com->mmcr[0]);
- writel(0x00400310, &mctl_com->mmcr[1]);
- writel(0x01000307, &mctl_com->mmcr[2]);
- writel(0x01000303, &mctl_com->mmcr[3]);
- writel(0x01800303, &mctl_com->mmcr[4]);
- writel(0x01800303, &mctl_com->mmcr[5]);
- writel(0x01800303, &mctl_com->mmcr[6]);
- writel(0x01800303, &mctl_com->mmcr[7]);
- writel(0x01000303, &mctl_com->mmcr[8]);
- writel(0x00000002, &mctl_com->mmcr[15]);
- writel(0x00000310, &mctl_com->mbagcr[0]);
- writel(0x00400310, &mctl_com->mbagcr[1]);
- writel(0x00400310, &mctl_com->mbagcr[2]);
- writel(0x00000307, &mctl_com->mbagcr[3]);
- writel(0x00000317, &mctl_com->mbagcr[4]);
- writel(0x00000307, &mctl_com->mbagcr[5]);
-}
-
-unsigned long sunxi_dram_init(void)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- u32 offset;
- int bank, bus, columns;
-
- /* Set initial parameters, these get modified by the autodetect code */
- struct dram_sun6i_para para = {
- .bus_width = 32,
- .chan = 2,
- .rank = 2,
- .page_size = 4096,
- .rows = 16,
- };
-
- /* A31s only has one channel */
- if (sunxi_get_ss_bonding_id() == SUNXI_SS_BOND_ID_A31S)
- para.chan = 1;
-
- mctl_sys_init();
-
- mctl_dll_init(0, ¶);
- setbits_le32(&mctl_com->ccr, MCTL_CCR_CH0_CLK_EN);
-
- if (para.chan == 2) {
- mctl_dll_init(1, ¶);
- setbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN);
- }
-
- setbits_le32(&mctl_com->ccr, MCTL_CCR_MASTER_CLK_EN);
-
- mctl_channel_init(0, ¶);
- if (para.chan == 2)
- mctl_channel_init(1, ¶);
-
- mctl_com_init(¶);
- mctl_port_cfg();
-
- /*
- * Change to 1 ch / sequence / 8192 byte pages / 16 rows /
- * 8 bit banks / 1 rank mode.
- */
- clrsetbits_le32(&mctl_com->cr,
- MCTL_CR_CHANNEL_MASK | MCTL_CR_PAGE_SIZE_MASK |
- MCTL_CR_ROW_MASK | MCTL_CR_BANK_MASK | MCTL_CR_RANK_MASK,
- MCTL_CR_CHANNEL(1) | MCTL_CR_SEQUENCE |
- MCTL_CR_PAGE_SIZE(8192) | MCTL_CR_ROW(16) |
- MCTL_CR_BANK(1) | MCTL_CR_RANK(1));
-
- /* Detect and set page size */
- for (columns = 7; columns < 20; columns++) {
- if (mctl_mem_matches(1 << columns))
- break;
- }
- bus = (para.bus_width == 32) ? 2 : 1;
- columns -= bus;
- para.page_size = (1 << columns) * (bus << 1);
- clrsetbits_le32(&mctl_com->cr, MCTL_CR_PAGE_SIZE_MASK,
- MCTL_CR_PAGE_SIZE(para.page_size));
-
- /* Detect and set rows */
- for (para.rows = 11; para.rows < 16; para.rows++) {
- offset = 1 << (para.rows + columns + bus);
- if (mctl_mem_matches(offset))
- break;
- }
- clrsetbits_le32(&mctl_com->cr, MCTL_CR_ROW_MASK,
- MCTL_CR_ROW(para.rows));
-
- /* Detect bank size */
- offset = 1 << (para.rows + columns + bus + 2);
- bank = mctl_mem_matches(offset) ? 0 : 1;
-
- /* Restore interleave, chan and rank values, set bank size */
- clrsetbits_le32(&mctl_com->cr,
- MCTL_CR_CHANNEL_MASK | MCTL_CR_SEQUENCE |
- MCTL_CR_BANK_MASK | MCTL_CR_RANK_MASK,
- MCTL_CR_CHANNEL(para.chan) | MCTL_CR_BANK(bank) |
- MCTL_CR_RANK(para.rank));
-
- return 1 << (para.rank + para.rows + bank + columns + para.chan + bus);
-}
+++ /dev/null
-/*
- * Sun8i platform dram controller init.
- *
- * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Note this code uses a lot of magic hex values, that is because this code
- * simply replays the init sequence as done by the Allwinner boot0 code, so
- * we do not know what these values mean. There are no symbolic constants for
- * these magic values, since we do not know how to name them and making up
- * names for them is not useful.
- *
- * The register-layout of the sunxi_mctl_phy_reg-s looks a lot like the one
- * found in the TI Keystone2 documentation:
- * http://www.ti.com/lit/ug/spruhn7a/spruhn7a.pdf
- * "Table4-2 DDR3 PHY Registers"
- * This may be used as a (possible) reference for future work / cleanups.
- */
-
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dram.h>
-#include <asm/arch/prcm.h>
-
-static const struct dram_para dram_para = {
- .clock = CONFIG_DRAM_CLK,
- .type = 3,
- .zq = CONFIG_DRAM_ZQ,
- .odt_en = IS_ENABLED(CONFIG_DRAM_ODT_EN),
- .odt_correction = CONFIG_DRAM_ODT_CORRECTION,
- .para1 = 0, /* not used (only used when tpr13 bit 31 is set */
- .para2 = 0, /* not used (only used when tpr13 bit 31 is set */
- .mr0 = 6736,
- .mr1 = 4,
- .mr2 = 16,
- .mr3 = 0,
- /* tpr0 - 10 contain timing constants or-ed together in u32 vals */
- .tpr0 = 0x2ab83def,
- .tpr1 = 0x18082356,
- .tpr2 = 0x00034156,
- .tpr3 = 0x448c5533,
- .tpr4 = 0x08010d00,
- .tpr5 = 0x0340b20f,
- .tpr6 = 0x20d118cc,
- .tpr7 = 0x14062485,
- .tpr8 = 0x220d1d52,
- .tpr9 = 0x1e078c22,
- .tpr10 = 0x3c,
- .tpr11 = 0, /* not used */
- .tpr12 = 0, /* not used */
- .tpr13 = 0x30000,
-};
-
-static void mctl_sys_init(void)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* enable pll5, note the divide by 2 is deliberate! */
- clock_set_pll5(dram_para.clock * 1000000 / 2,
- dram_para.tpr13 & 0x40000);
-
- /* deassert ahb mctl reset */
- setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
-
- /* enable ahb mctl clock */
- setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
-}
-
-static void mctl_apply_odt_correction(u32 *reg, int correction)
-{
- int val;
-
- val = (readl(reg) >> 8) & 0xff;
- val += correction;
-
- /* clamp */
- if (val < 0)
- val = 0;
- else if (val > 255)
- val = 255;
-
- clrsetbits_le32(reg, 0xff00, val << 8);
-}
-
-static void mctl_init(u32 *bus_width)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
- struct sunxi_mctl_phy_reg * const mctl_phy =
- (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
-
- if (dram_para.tpr13 & 0x20)
- writel(0x40b, &mctl_phy->dcr);
- else
- writel(0x1000040b, &mctl_phy->dcr);
-
- if (dram_para.clock >= 480)
- writel(0x5c000, &mctl_phy->dllgcr);
- else
- writel(0xdc000, &mctl_phy->dllgcr);
-
- writel(0x0a003e3f, &mctl_phy->pgcr0);
- writel(0x03008421, &mctl_phy->pgcr1);
-
- writel(dram_para.mr0, &mctl_phy->mr0);
- writel(dram_para.mr1, &mctl_phy->mr1);
- writel(dram_para.mr2, &mctl_phy->mr2);
- writel(dram_para.mr3, &mctl_phy->mr3);
-
- if (!(dram_para.tpr13 & 0x10000)) {
- clrsetbits_le32(&mctl_phy->dx0gcr, 0x3800, 0x2000);
- clrsetbits_le32(&mctl_phy->dx1gcr, 0x3800, 0x2000);
- }
-
- /*
- * All the masking and shifting below converts what I assume are DDR
- * timing constants from Allwinner dram_para tpr format to the actual
- * timing registers format.
- */
-
- writel((dram_para.tpr0 & 0x000fffff), &mctl_phy->ptr2);
- writel((dram_para.tpr1 & 0x1fffffff), &mctl_phy->ptr3);
- writel((dram_para.tpr0 & 0x3ff00000) >> 2 |
- (dram_para.tpr2 & 0x0003ffff), &mctl_phy->ptr4);
-
- writel(dram_para.tpr3, &mctl_phy->dtpr0);
- writel(dram_para.tpr4, &mctl_phy->dtpr2);
-
- writel(0x01000081, &mctl_phy->dtcr);
-
- if (dram_para.clock <= 240 || !dram_para.odt_en) {
- clrbits_le32(&mctl_phy->dx0gcr, 0x600);
- clrbits_le32(&mctl_phy->dx1gcr, 0x600);
- }
- if (dram_para.clock <= 240) {
- writel(0, &mctl_phy->odtcr);
- writel(0, &mctl_ctl->odtmap);
- }
-
- writel(((dram_para.tpr5 & 0x0f00) << 12) |
- ((dram_para.tpr5 & 0x00f8) << 9) |
- ((dram_para.tpr5 & 0x0007) << 8),
- &mctl_ctl->rfshctl0);
-
- writel(((dram_para.tpr5 & 0x0003f000) << 12) |
- ((dram_para.tpr5 & 0x00fc0000) >> 2) |
- ((dram_para.tpr5 & 0x3f000000) >> 16) |
- ((dram_para.tpr6 & 0x0000003f) >> 0),
- &mctl_ctl->dramtmg0);
-
- writel(((dram_para.tpr6 & 0x000007c0) << 10) |
- ((dram_para.tpr6 & 0x0000f800) >> 3) |
- ((dram_para.tpr6 & 0x003f0000) >> 16),
- &mctl_ctl->dramtmg1);
-
- writel(((dram_para.tpr6 & 0x0fc00000) << 2) |
- ((dram_para.tpr7 & 0x0000001f) << 16) |
- ((dram_para.tpr7 & 0x000003e0) << 3) |
- ((dram_para.tpr7 & 0x0000fc00) >> 10),
- &mctl_ctl->dramtmg2);
-
- writel(((dram_para.tpr7 & 0x03ff0000) >> 16) |
- ((dram_para.tpr6 & 0xf0000000) >> 16),
- &mctl_ctl->dramtmg3);
-
- writel(((dram_para.tpr7 & 0x3c000000) >> 2 ) |
- ((dram_para.tpr8 & 0x00000007) << 16) |
- ((dram_para.tpr8 & 0x00000038) << 5) |
- ((dram_para.tpr8 & 0x000003c0) >> 6),
- &mctl_ctl->dramtmg4);
-
- writel(((dram_para.tpr8 & 0x00003c00) << 14) |
- ((dram_para.tpr8 & 0x0003c000) << 2) |
- ((dram_para.tpr8 & 0x00fc0000) >> 10) |
- ((dram_para.tpr8 & 0x0f000000) >> 24),
- &mctl_ctl->dramtmg5);
-
- writel(0x00000008, &mctl_ctl->dramtmg8);
-
- writel(((dram_para.tpr8 & 0xf0000000) >> 4) |
- ((dram_para.tpr9 & 0x00007c00) << 6) |
- ((dram_para.tpr9 & 0x000003e0) << 3) |
- ((dram_para.tpr9 & 0x0000001f) >> 0),
- &mctl_ctl->pitmg0);
-
- setbits_le32(&mctl_ctl->pitmg1, 0x80000);
-
- writel(((dram_para.tpr9 & 0x003f8000) << 9) | 0x2001,
- &mctl_ctl->sched);
-
- writel((dram_para.mr0 << 16) | dram_para.mr1, &mctl_ctl->init3);
- writel((dram_para.mr2 << 16) | dram_para.mr3, &mctl_ctl->init4);
-
- writel(0x00000000, &mctl_ctl->pimisc);
- writel(0x80000000, &mctl_ctl->upd0);
-
- writel(((dram_para.tpr9 & 0xffc00000) >> 22) |
- ((dram_para.tpr10 & 0x00000fff) << 16),
- &mctl_ctl->rfshtmg);
-
- if (dram_para.tpr13 & 0x20)
- writel(0x01040001, &mctl_ctl->mstr);
- else
- writel(0x01040401, &mctl_ctl->mstr);
-
- if (!(dram_para.tpr13 & 0x20000)) {
- writel(0x00000002, &mctl_ctl->pwrctl);
- writel(0x00008001, &mctl_ctl->pwrtmg);
- }
-
- writel(0x00000001, &mctl_ctl->rfshctl3);
- writel(0x00000001, &mctl_ctl->pimisc);
-
- /* deassert dram_clk_cfg reset */
- setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
-
- setbits_le32(&mctl_com->ccr, 0x80000);
-
- /* zq stuff */
- writel((dram_para.zq >> 8) & 0xff, &mctl_phy->zqcr1);
-
- writel(0x00000003, &mctl_phy->pir);
- udelay(10);
- mctl_await_completion(&mctl_phy->pgsr0, 0x09, 0x09);
-
- writel(readl(&mctl_phy->zqsr0) | 0x10000000, &mctl_phy->zqcr2);
- writel(dram_para.zq & 0xff, &mctl_phy->zqcr1);
-
- /* A23-v1.0 SDK uses 0xfdf3, A23-v2.0 SDK uses 0x5f3 */
- writel(0x000005f3, &mctl_phy->pir);
- udelay(10);
- mctl_await_completion(&mctl_phy->pgsr0, 0x03, 0x03);
-
- if (readl(&mctl_phy->dx1gsr0) & 0x1000000) {
- *bus_width = 8;
- writel(0, &mctl_phy->dx1gcr);
- writel(dram_para.zq & 0xff, &mctl_phy->zqcr1);
- writel(0x5f3, &mctl_phy->pir);
- udelay(10000);
- setbits_le32(&mctl_ctl->mstr, 0x1000);
- } else
- *bus_width = 16;
-
- if (dram_para.odt_correction) {
- mctl_apply_odt_correction(&mctl_phy->dx0lcdlr1,
- dram_para.odt_correction);
- mctl_apply_odt_correction(&mctl_phy->dx1lcdlr1,
- dram_para.odt_correction);
- }
-
- mctl_await_completion(&mctl_ctl->statr, 0x01, 0x01);
-
- writel(0x08003e3f, &mctl_phy->pgcr0);
- writel(0x00000000, &mctl_ctl->rfshctl3);
-}
-
-unsigned long sunxi_dram_init(void)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- const u32 columns = 13;
- u32 bus, bus_width, offset, page_size, rows;
-
- mctl_sys_init();
- mctl_init(&bus_width);
-
- if (bus_width == 16) {
- page_size = 8;
- bus = 1;
- } else {
- page_size = 7;
- bus = 0;
- }
-
- if (!(dram_para.tpr13 & 0x80000000)) {
- /* Detect and set rows */
- writel(0x000310f4 | MCTL_CR_PAGE_SIZE(page_size),
- &mctl_com->cr);
- setbits_le32(&mctl_com->swonr, 0x0003ffff);
- for (rows = 11; rows < 16; rows++) {
- offset = 1 << (rows + columns + bus);
- if (mctl_mem_matches(offset))
- break;
- }
- clrsetbits_le32(&mctl_com->cr, MCTL_CR_ROW_MASK,
- MCTL_CR_ROW(rows));
- } else {
- rows = (dram_para.para1 >> 16) & 0xff;
- writel(((dram_para.para2 & 0x000000f0) << 11) |
- ((rows - 1) << 4) |
- ((dram_para.para1 & 0x0f000000) >> 22) |
- 0x31000 | MCTL_CR_PAGE_SIZE(page_size),
- &mctl_com->cr);
- setbits_le32(&mctl_com->swonr, 0x0003ffff);
- }
-
- /* Setup DRAM master priority? If this is left out things still work */
- writel(0x00000008, &mctl_com->mcr0_0);
- writel(0x0001000d, &mctl_com->mcr1_0);
- writel(0x00000004, &mctl_com->mcr0_1);
- writel(0x00000080, &mctl_com->mcr1_1);
- writel(0x00000004, &mctl_com->mcr0_2);
- writel(0x00000019, &mctl_com->mcr1_2);
- writel(0x00000004, &mctl_com->mcr0_3);
- writel(0x00000080, &mctl_com->mcr1_3);
- writel(0x00000004, &mctl_com->mcr0_4);
- writel(0x01010040, &mctl_com->mcr1_4);
- writel(0x00000004, &mctl_com->mcr0_5);
- writel(0x0001002f, &mctl_com->mcr1_5);
- writel(0x00000004, &mctl_com->mcr0_6);
- writel(0x00010020, &mctl_com->mcr1_6);
- writel(0x00000004, &mctl_com->mcr0_7);
- writel(0x00010020, &mctl_com->mcr1_7);
- writel(0x00000008, &mctl_com->mcr0_8);
- writel(0x00000001, &mctl_com->mcr1_8);
- writel(0x00000008, &mctl_com->mcr0_9);
- writel(0x00000005, &mctl_com->mcr1_9);
- writel(0x00000008, &mctl_com->mcr0_10);
- writel(0x00000003, &mctl_com->mcr1_10);
- writel(0x00000008, &mctl_com->mcr0_11);
- writel(0x00000005, &mctl_com->mcr1_11);
- writel(0x00000008, &mctl_com->mcr0_12);
- writel(0x00000003, &mctl_com->mcr1_12);
- writel(0x00000008, &mctl_com->mcr0_13);
- writel(0x00000004, &mctl_com->mcr1_13);
- writel(0x00000008, &mctl_com->mcr0_14);
- writel(0x00000002, &mctl_com->mcr1_14);
- writel(0x00000008, &mctl_com->mcr0_15);
- writel(0x00000003, &mctl_com->mcr1_15);
- writel(0x00010138, &mctl_com->bwcr);
-
- return 1 << (rows + columns + bus);
-}
+++ /dev/null
-/*
- * Sun8i a33 platform dram controller init.
- *
- * (C) Copyright 2007-2015 Allwinner Technology Co.
- * Jerry Wang <wangflord@allwinnertech.com>
- * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
- * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dram.h>
-#include <asm/arch/prcm.h>
-
-/* PLL runs at 2x dram-clk, controller runs at PLL / 4 (dram-clk / 2) */
-#define DRAM_CLK_MUL 2
-#define DRAM_CLK_DIV 4
-#define DRAM_SIGMA_DELTA_ENABLE 1
-
-struct dram_para {
- u8 cs1;
- u8 seq;
- u8 bank;
- u8 rank;
- u8 rows;
- u8 bus_width;
- u16 page_size;
-};
-
-static void mctl_set_cr(struct dram_para *para)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
-
- writel(MCTL_CR_CS1_CONTROL(para->cs1) | MCTL_CR_UNKNOWN |
- MCTL_CR_CHANNEL(1) | MCTL_CR_DDR3 |
- (para->seq ? MCTL_CR_SEQUENCE : 0) |
- ((para->bus_width == 16) ? MCTL_CR_BUSW16 : MCTL_CR_BUSW8) |
- MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
- MCTL_CR_BANK(para->bank) | MCTL_CR_RANK(para->rank),
- &mctl_com->cr);
-}
-
-static void auto_detect_dram_size(struct dram_para *para)
-{
- u8 orig_rank = para->rank;
- int rows, columns;
-
- /* Row detect */
- para->page_size = 512;
- para->seq = 1;
- para->rows = 16;
- para->rank = 1;
- mctl_set_cr(para);
- for (rows = 11 ; rows < 16 ; rows++) {
- if (mctl_mem_matches(1 << (rows + 9))) /* row-column */
- break;
- }
-
- /* Column (page size) detect */
- para->rows = 11;
- para->page_size = 8192;
- mctl_set_cr(para);
- for (columns = 9 ; columns < 13 ; columns++) {
- if (mctl_mem_matches(1 << columns))
- break;
- }
-
- para->seq = 0;
- para->rank = orig_rank;
- para->rows = rows;
- para->page_size = 1 << columns;
- mctl_set_cr(para);
-}
-
-static inline int ns_to_t(int nanoseconds)
-{
- const unsigned int ctrl_freq =
- CONFIG_DRAM_CLK * DRAM_CLK_MUL / DRAM_CLK_DIV;
-
- return (ctrl_freq * nanoseconds + 999) / 1000;
-}
-
-static void auto_set_timing_para(struct dram_para *para)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
- u32 reg_val;
-
- u8 tccd = 2;
- u8 tfaw = ns_to_t(50);
- u8 trrd = max(ns_to_t(10), 4);
- u8 trcd = ns_to_t(15);
- u8 trc = ns_to_t(53);
- u8 txp = max(ns_to_t(8), 3);
- u8 twtr = max(ns_to_t(8), 4);
- u8 trtp = max(ns_to_t(8), 4);
- u8 twr = max(ns_to_t(15), 3);
- u8 trp = ns_to_t(15);
- u8 tras = ns_to_t(38);
-
- u16 trefi = ns_to_t(7800) / 32;
- u16 trfc = ns_to_t(350);
-
- /* Fixed timing parameters */
- u8 tmrw = 0;
- u8 tmrd = 4;
- u8 tmod = 12;
- u8 tcke = 3;
- u8 tcksrx = 5;
- u8 tcksre = 5;
- u8 tckesr = 4;
- u8 trasmax = 24;
- u8 tcl = 6; /* CL 12 */
- u8 tcwl = 4; /* CWL 8 */
- u8 t_rdata_en = 4;
- u8 wr_latency = 2;
-
- u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */
- u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1; /* 360ns */
- u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
- u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
-
- u8 twtp = tcwl + 2 + twr; /* WL + BL / 2 + tWR */
- u8 twr2rd = tcwl + 2 + twtr; /* WL + BL / 2 + tWTR */
- u8 trd2wr = tcl + 2 + 1 - tcwl; /* RL + BL / 2 + 2 - WL */
-
- /* Set work mode register */
- mctl_set_cr(para);
- /* Set mode register */
- writel(MCTL_MR0, &mctl_ctl->mr0);
- writel(MCTL_MR1, &mctl_ctl->mr1);
- writel(MCTL_MR2, &mctl_ctl->mr2);
- writel(MCTL_MR3, &mctl_ctl->mr3);
- /* Set dram timing */
- reg_val = (twtp << 24) | (tfaw << 16) | (trasmax << 8) | (tras << 0);
- writel(reg_val, &mctl_ctl->dramtmg0);
- reg_val = (txp << 16) | (trtp << 8) | (trc << 0);
- writel(reg_val, &mctl_ctl->dramtmg1);
- reg_val = (tcwl << 24) | (tcl << 16) | (trd2wr << 8) | (twr2rd << 0);
- writel(reg_val, &mctl_ctl->dramtmg2);
- reg_val = (tmrw << 16) | (tmrd << 12) | (tmod << 0);
- writel(reg_val, &mctl_ctl->dramtmg3);
- reg_val = (trcd << 24) | (tccd << 16) | (trrd << 8) | (trp << 0);
- writel(reg_val, &mctl_ctl->dramtmg4);
- reg_val = (tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | (tcke << 0);
- writel(reg_val, &mctl_ctl->dramtmg5);
- /* Set two rank timing and exit self-refresh timing */
- reg_val = readl(&mctl_ctl->dramtmg8);
- reg_val &= ~(0xff << 8);
- reg_val &= ~(0xff << 0);
- reg_val |= (0x33 << 8);
- reg_val |= (0x8 << 0);
- writel(reg_val, &mctl_ctl->dramtmg8);
- /* Set phy interface time */
- reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8)
- | (wr_latency << 0);
- /* PHY interface write latency and read latency configure */
- writel(reg_val, &mctl_ctl->pitmg0);
- /* Set phy time PTR0-2 use default */
- writel(((tdinit0 << 0) | (tdinit1 << 20)), &mctl_ctl->ptr3);
- writel(((tdinit2 << 0) | (tdinit3 << 20)), &mctl_ctl->ptr4);
- /* Set refresh timing */
- reg_val = (trefi << 16) | (trfc << 0);
- writel(reg_val, &mctl_ctl->rfshtmg);
-}
-
-static void mctl_set_pir(u32 val)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- writel(val, &mctl_ctl->pir);
- mctl_await_completion(&mctl_ctl->pgsr0, 0x1, 0x1);
-}
-
-static void mctl_data_train_cfg(struct dram_para *para)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- if (para->rank == 2)
- clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x3 << 24);
- else
- clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x1 << 24);
-}
-
-static int mctl_train_dram(struct dram_para *para)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- mctl_data_train_cfg(para);
- mctl_set_pir(0x5f3);
-
- return ((readl(&mctl_ctl->pgsr0) >> 20) & 0xff) ? -EIO : 0;
-}
-
-static int mctl_channel_init(struct dram_para *para)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- u32 low_data_lines_status; /* Training status of datalines 0 - 7 */
- u32 high_data_lines_status; /* Training status of datalines 8 - 15 */
-
- auto_set_timing_para(para);
-
- /* Disable dram VTC */
- clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0);
-
- /* Set ODT */
- if ((CONFIG_DRAM_CLK > 400) && IS_ENABLED(CONFIG_DRAM_ODT_EN)) {
- setbits_le32(DXnGCR0(0), 0x3 << 9);
- setbits_le32(DXnGCR0(1), 0x3 << 9);
- } else {
- clrbits_le32(DXnGCR0(0), 0x3 << 9);
- clrbits_le32(DXnGCR0(1), 0x3 << 9);
- }
-
- /* set PLL configuration */
- if (CONFIG_DRAM_CLK >= 480)
- setbits_le32(&mctl_ctl->pllgcr, 0x1 << 18);
- else
- setbits_le32(&mctl_ctl->pllgcr, 0x3 << 18);
-
- /* Auto detect dram config, set 2 rank and 16bit bus-width */
- para->cs1 = 0;
- para->rank = 2;
- para->bus_width = 16;
- mctl_set_cr(para);
-
- /* Open DQS gating */
- clrbits_le32(&mctl_ctl->pgcr2, (0x3 << 6));
- clrbits_le32(&mctl_ctl->dqsgmr, (0x1 << 8) | (0x7));
-
- mctl_data_train_cfg(para);
-
- /* ZQ calibration */
- writel(CONFIG_DRAM_ZQ & 0xff, &mctl_ctl->zqcr1);
- /* CA calibration */
- mctl_set_pir(0x00000003);
- /* More ZQ calibration */
- writel(readl(&mctl_ctl->zqsr0) | 0x10000000, &mctl_ctl->zqcr2);
- writel((CONFIG_DRAM_ZQ >> 8) & 0xff, &mctl_ctl->zqcr1);
-
- /* DQS gate training */
- if (mctl_train_dram(para) != 0) {
- low_data_lines_status = (readl(DXnGSR0(0)) >> 24) & 0x03;
- high_data_lines_status = (readl(DXnGSR0(1)) >> 24) & 0x03;
-
- if (low_data_lines_status == 0x3)
- return -EIO;
-
- /* DRAM has only one rank */
- para->rank = 1;
- mctl_set_cr(para);
-
- if (low_data_lines_status == high_data_lines_status)
- goto done; /* 16 bit bus, 1 rank */
-
- if (!(low_data_lines_status & high_data_lines_status)) {
- /* Retry 16 bit bus-width with CS1 set */
- para->cs1 = 1;
- mctl_set_cr(para);
- if (mctl_train_dram(para) == 0)
- goto done;
- }
-
- /* Try 8 bit bus-width */
- writel(0x0, DXnGCR0(1)); /* Disable high DQ */
- para->cs1 = 0;
- para->bus_width = 8;
- mctl_set_cr(para);
- if (mctl_train_dram(para) != 0)
- return -EIO;
- }
-done:
- /* Check the dramc status */
- mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
-
- /* Close DQS gating */
- setbits_le32(&mctl_ctl->pgcr2, 0x3 << 6);
-
- /* Enable master access */
- writel(0xffffffff, &mctl_com->maer);
-
- return 0;
-}
-
-static void mctl_sys_init(struct dram_para *para)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
-
- clrsetbits_le32(&ccm->dram_pll_cfg, CCM_DRAMPLL_CFG_SRC_MASK,
- CCM_DRAMPLL_CFG_SRC_PLL11);
-
- clock_set_pll11(CONFIG_DRAM_CLK * 1000000 * DRAM_CLK_MUL,
- DRAM_SIGMA_DELTA_ENABLE);
-
- clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV_MASK,
- CCM_DRAMCLK_CFG_DIV(DRAM_CLK_DIV) |
- CCM_DRAMCLK_CFG_RST | CCM_DRAMCLK_CFG_UPD);
- mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
-
- setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
- setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
- setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
- setbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
-
- /* Set dram master access priority */
- writel(0x0, &mctl_com->mapr);
- writel(0x0f802f01, &mctl_ctl->sched);
- writel(0x0000400f, &mctl_ctl->clken); /* normal */
-
- udelay(250);
-}
-
-unsigned long sunxi_dram_init(void)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- struct dram_para para = {
- .cs1 = 0,
- .bank = 1,
- .rank = 1,
- .rows = 15,
- .bus_width = 16,
- .page_size = 2048,
- };
-
- mctl_sys_init(¶);
-
- if (mctl_channel_init(¶) != 0)
- return 0;
-
- auto_detect_dram_size(¶);
-
- /* Enable master software clk */
- writel(readl(&mctl_com->swonr) | 0x3ffff, &mctl_com->swonr);
-
- /* Set DRAM ODT MAP */
- if (para.rank == 2)
- writel(0x00000303, &mctl_ctl->odtmap);
- else
- writel(0x00000201, &mctl_ctl->odtmap);
-
- return para.page_size * (para.bus_width / 8) *
- (1 << (para.bank + para.rank + para.rows));
-}
+++ /dev/null
-/*
- * Sun8i a33 platform dram controller init.
- *
- * (C) Copyright 2007-2015 Allwinner Technology Co.
- * Jerry Wang <wangflord@allwinnertech.com>
- * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
- * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dram.h>
-#include <asm/arch/prcm.h>
-
-#define DRAM_CLK_MUL 2
-#define DRAM_CLK_DIV 1
-
-struct dram_para {
- u8 cs1;
- u8 seq;
- u8 bank;
- u8 rank;
- u8 rows;
- u8 bus_width;
- u8 dram_type;
- u16 page_size;
-};
-
-static void mctl_set_cr(struct dram_para *para)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
-
- writel(MCTL_CR_CS1_CONTROL(para->cs1) | MCTL_CR_UNKNOWN |
- MCTL_CR_CHANNEL(1) | MCTL_CR_DRAM_TYPE(para->dram_type) |
- (para->seq ? MCTL_CR_SEQUENCE : 0) |
- ((para->bus_width == 16) ? MCTL_CR_BUSW16 : MCTL_CR_BUSW8) |
- MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
- MCTL_CR_BANK(para->bank) | MCTL_CR_RANK(para->rank),
- &mctl_com->cr);
-}
-
-static void auto_detect_dram_size(struct dram_para *para)
-{
- u8 orig_rank = para->rank;
- int rows, columns;
-
- /* Row detect */
- para->page_size = 512;
- para->seq = 1;
- para->rows = 16;
- para->rank = 1;
- mctl_set_cr(para);
- for (rows = 11 ; rows < 16 ; rows++) {
- if (mctl_mem_matches(1 << (rows + 9))) /* row-column */
- break;
- }
-
- /* Column (page size) detect */
- para->rows = 11;
- para->page_size = 8192;
- mctl_set_cr(para);
- for (columns = 9 ; columns < 13 ; columns++) {
- if (mctl_mem_matches(1 << columns))
- break;
- }
-
- para->seq = 0;
- para->rank = orig_rank;
- para->rows = rows;
- para->page_size = 1 << columns;
- mctl_set_cr(para);
-}
-
-static inline int ns_to_t(int nanoseconds)
-{
- const unsigned int ctrl_freq =
- CONFIG_DRAM_CLK * DRAM_CLK_MUL / DRAM_CLK_DIV;
-
- return (ctrl_freq * nanoseconds + 999) / 1000;
-}
-
-static void auto_set_timing_para(struct dram_para *para)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- u32 reg_val;
-
- u8 tccd = 2;
- u8 tfaw = ns_to_t(50);
- u8 trrd = max(ns_to_t(10), 4);
- u8 trcd = ns_to_t(15);
- u8 trc = ns_to_t(53);
- u8 txp = max(ns_to_t(8), 3);
- u8 twtr = max(ns_to_t(8), 4);
- u8 trtp = max(ns_to_t(8), 4);
- u8 twr = max(ns_to_t(15), 3);
- u8 trp = ns_to_t(15);
- u8 tras = ns_to_t(38);
-
- u16 trefi = ns_to_t(7800) / 32;
- u16 trfc = ns_to_t(350);
-
- /* Fixed timing parameters */
- u8 tmrw = 0;
- u8 tmrd = 4;
- u8 tmod = 12;
- u8 tcke = 3;
- u8 tcksrx = 5;
- u8 tcksre = 5;
- u8 tckesr = 4;
- u8 trasmax = 24;
- u8 tcl = 6; /* CL 12 */
- u8 tcwl = 4; /* CWL 8 */
- u8 t_rdata_en = 4;
- u8 wr_latency = 2;
-
- u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */
- u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1; /* 360ns */
- u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
- u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
-
- u8 twtp = tcwl + 2 + twr; /* WL + BL / 2 + tWR */
- u8 twr2rd = tcwl + 2 + twtr; /* WL + BL / 2 + tWTR */
- u8 trd2wr = tcl + 2 + 1 - tcwl; /* RL + BL / 2 + 2 - WL */
-
- /* Set work mode register */
- mctl_set_cr(para);
- /* Set mode register */
- if (para->dram_type == DRAM_TYPE_DDR3) {
- writel(MCTL_MR0, &mctl_ctl->mr0);
- writel(MCTL_MR1, &mctl_ctl->mr1);
- writel(MCTL_MR2, &mctl_ctl->mr2);
- writel(MCTL_MR3, &mctl_ctl->mr3);
- } else if (para->dram_type == DRAM_TYPE_LPDDR3) {
- writel(MCTL_LPDDR3_MR0, &mctl_ctl->mr0);
- writel(MCTL_LPDDR3_MR1, &mctl_ctl->mr1);
- writel(MCTL_LPDDR3_MR2, &mctl_ctl->mr2);
- writel(MCTL_LPDDR3_MR3, &mctl_ctl->mr3);
-
- /* timing parameters for LPDDR3 */
- tfaw = max(ns_to_t(50), 4);
- trrd = max(ns_to_t(10), 2);
- trcd = max(ns_to_t(24), 2);
- trc = ns_to_t(70);
- txp = max(ns_to_t(8), 2);
- twtr = max(ns_to_t(8), 2);
- trtp = max(ns_to_t(8), 2);
- trp = max(ns_to_t(27), 2);
- tras = ns_to_t(42);
- trefi = ns_to_t(3900) / 32;
- trfc = ns_to_t(210);
- tmrw = 5;
- tmrd = 5;
- tckesr = 5;
- tcwl = 3; /* CWL 8 */
- t_rdata_en = 5;
- tdinit0 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
- tdinit1 = (100 * CONFIG_DRAM_CLK) / 1000 + 1; /* 100ns */
- tdinit2 = (11 * CONFIG_DRAM_CLK) + 1; /* 200us */
- tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
- twtp = tcwl + 4 + twr + 1; /* CWL + BL/2 + tWR */
- twr2rd = tcwl + 4 + 1 + twtr; /* WL + BL / 2 + tWTR */
- trd2wr = tcl + 4 + 5 - tcwl + 1; /* RL + BL / 2 + 2 - WL */
- }
- /* Set dram timing */
- reg_val = (twtp << 24) | (tfaw << 16) | (trasmax << 8) | (tras << 0);
- writel(reg_val, &mctl_ctl->dramtmg0);
- reg_val = (txp << 16) | (trtp << 8) | (trc << 0);
- writel(reg_val, &mctl_ctl->dramtmg1);
- reg_val = (tcwl << 24) | (tcl << 16) | (trd2wr << 8) | (twr2rd << 0);
- writel(reg_val, &mctl_ctl->dramtmg2);
- reg_val = (tmrw << 16) | (tmrd << 12) | (tmod << 0);
- writel(reg_val, &mctl_ctl->dramtmg3);
- reg_val = (trcd << 24) | (tccd << 16) | (trrd << 8) | (trp << 0);
- writel(reg_val, &mctl_ctl->dramtmg4);
- reg_val = (tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | (tcke << 0);
- writel(reg_val, &mctl_ctl->dramtmg5);
- /* Set two rank timing and exit self-refresh timing */
- reg_val = readl(&mctl_ctl->dramtmg8);
- reg_val &= ~(0xff << 8);
- reg_val &= ~(0xff << 0);
- reg_val |= (0x33 << 8);
- reg_val |= (0x8 << 0);
- writel(reg_val, &mctl_ctl->dramtmg8);
- /* Set phy interface time */
- reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8)
- | (wr_latency << 0);
- /* PHY interface write latency and read latency configure */
- writel(reg_val, &mctl_ctl->pitmg0);
- /* Set phy time PTR0-2 use default */
- writel(((tdinit0 << 0) | (tdinit1 << 20)), &mctl_ctl->ptr3);
- writel(((tdinit2 << 0) | (tdinit3 << 20)), &mctl_ctl->ptr4);
- /* Set refresh timing */
- reg_val = (trefi << 16) | (trfc << 0);
- writel(reg_val, &mctl_ctl->rfshtmg);
-}
-
-static void mctl_set_pir(u32 val)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- writel(val, &mctl_ctl->pir);
- mctl_await_completion(&mctl_ctl->pgsr0, 0x1, 0x1);
-}
-
-static void mctl_data_train_cfg(struct dram_para *para)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- if (para->rank == 2)
- clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x3 << 24);
- else
- clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x1 << 24);
-}
-
-static int mctl_train_dram(struct dram_para *para)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- mctl_data_train_cfg(para);
- mctl_set_pir(0x5f3);
-
- return ((readl(&mctl_ctl->pgsr0) >> 20) & 0xff) ? -EIO : 0;
-}
-
-static void set_master_priority(void)
-{
- writel(0x00a0000d, MCTL_MASTER_CFG0(0));
- writel(0x00500064, MCTL_MASTER_CFG1(0));
- writel(0x07000009, MCTL_MASTER_CFG0(1));
- writel(0x00000600, MCTL_MASTER_CFG1(1));
- writel(0x01000009, MCTL_MASTER_CFG0(3));
- writel(0x00000064, MCTL_MASTER_CFG1(3));
- writel(0x08000009, MCTL_MASTER_CFG0(4));
- writel(0x00000640, MCTL_MASTER_CFG1(4));
- writel(0x20000308, MCTL_MASTER_CFG0(8));
- writel(0x00001000, MCTL_MASTER_CFG1(8));
- writel(0x02800009, MCTL_MASTER_CFG0(9));
- writel(0x00000100, MCTL_MASTER_CFG1(9));
- writel(0x01800009, MCTL_MASTER_CFG0(5));
- writel(0x00000100, MCTL_MASTER_CFG1(5));
- writel(0x01800009, MCTL_MASTER_CFG0(7));
- writel(0x00000100, MCTL_MASTER_CFG1(7));
- writel(0x00640009, MCTL_MASTER_CFG0(6));
- writel(0x00000032, MCTL_MASTER_CFG1(6));
- writel(0x0100000d, MCTL_MASTER_CFG0(2));
- writel(0x00500080, MCTL_MASTER_CFG1(2));
-}
-
-static int mctl_channel_init(struct dram_para *para)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- u32 low_data_lines_status; /* Training status of datalines 0 - 7 */
- u32 high_data_lines_status; /* Training status of datalines 8 - 15 */
- u32 i, rval;
-
- auto_set_timing_para(para);
-
- /* Set dram master access priority */
- writel(0x000101a0, &mctl_com->bwcr);
- /* set cpu high priority */
- writel(0x1, &mctl_com->mapr);
- set_master_priority();
- udelay(250);
-
- /* Disable dram VTC */
- clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0 | 0x1 << 30);
- clrsetbits_le32(&mctl_ctl->pgcr1, 0x1 << 24, 0x1 << 26);
-
- writel(0x94be6fa3, MCTL_PROTECT);
- udelay(100);
- clrsetbits_le32(MX_UPD2, 0xfff << 16, 0x50 << 16);
- writel(0x0, MCTL_PROTECT);
- udelay(100);
-
-
- /* Set ODT */
- if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
- rval = 0x0;
- else
- rval = 0x2;
-
- for (i = 0 ; i < 11 ; i++) {
- clrsetbits_le32(DATX0IOCR(i), (0x3 << 24) | (0x3 << 16),
- rval << 24);
- clrsetbits_le32(DATX1IOCR(i), (0x3 << 24) | (0x3 << 16),
- rval << 24);
- clrsetbits_le32(DATX2IOCR(i), (0x3 << 24) | (0x3 << 16),
- rval << 24);
- clrsetbits_le32(DATX3IOCR(i), (0x3 << 24) | (0x3 << 16),
- rval << 24);
- }
-
- for (i = 0; i < 31; i++)
- clrsetbits_le32(CAIOCR(i), 0x3 << 26 | 0x3 << 16, 0x2 << 26);
-
- /* set PLL configuration */
- if (CONFIG_DRAM_CLK >= 480)
- setbits_le32(&mctl_ctl->pllgcr, 0x1 << 19);
- else
- setbits_le32(&mctl_ctl->pllgcr, 0x3 << 19);
-
- /* Auto detect dram config, set 2 rank and 16bit bus-width */
- para->cs1 = 0;
- para->rank = 2;
- para->bus_width = 16;
- mctl_set_cr(para);
-
- /* Open DQS gating */
- clrbits_le32(&mctl_ctl->pgcr2, (0x3 << 6));
- clrbits_le32(&mctl_ctl->dqsgmr, (0x1 << 8) | (0x7));
-
- if (para->dram_type == DRAM_TYPE_LPDDR3)
- clrsetbits_le32(&mctl_ctl->dxccr, (0x1 << 27) | (0x3<<6) ,
- 0x1 << 31);
- if (readl(&mctl_com->cr) & 0x1)
- writel(0x00000303, &mctl_ctl->odtmap);
- else
- writel(0x00000201, &mctl_ctl->odtmap);
-
- mctl_data_train_cfg(para);
- /* ZQ calibration */
- clrsetbits_le32(ZQnPR(0), 0x000000ff, CONFIG_DRAM_ZQ & 0xff);
- clrsetbits_le32(ZQnPR(1), 0x000000ff, (CONFIG_DRAM_ZQ >> 8) & 0xff);
- /* CA calibration */
-
- if (para->dram_type == DRAM_TYPE_DDR3)
- mctl_set_pir(0x0201f3 | 0x1<<10);
- else
- mctl_set_pir(0x020173 | 0x1<<10);
-
- /* DQS gate training */
- if (mctl_train_dram(para) != 0) {
- low_data_lines_status = (readl(DXnGSR0(0)) >> 24) & 0x03;
- high_data_lines_status = (readl(DXnGSR0(1)) >> 24) & 0x03;
-
- if (low_data_lines_status == 0x3)
- return -EIO;
-
- /* DRAM has only one rank */
- para->rank = 1;
- mctl_set_cr(para);
-
- if (low_data_lines_status == high_data_lines_status)
- goto done; /* 16 bit bus, 1 rank */
-
- if (!(low_data_lines_status & high_data_lines_status)) {
- /* Retry 16 bit bus-width with CS1 set */
- para->cs1 = 1;
- mctl_set_cr(para);
- if (mctl_train_dram(para) == 0)
- goto done;
- }
-
- /* Try 8 bit bus-width */
- writel(0x0, DXnGCR0(1)); /* Disable high DQ */
- para->cs1 = 0;
- para->bus_width = 8;
- mctl_set_cr(para);
- if (mctl_train_dram(para) != 0)
- return -EIO;
- }
-done:
- /* Check the dramc status */
- mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
-
- /* Close DQS gating */
- setbits_le32(&mctl_ctl->pgcr2, 0x3 << 6);
-
- /* set PGCR3,CKE polarity */
- writel(0x00aa0060, &mctl_ctl->pgcr3);
- /* Enable master access */
- writel(0xffffffff, &mctl_com->maer);
-
- return 0;
-}
-
-static void mctl_sys_init(struct dram_para *para)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- clrbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE);
- clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
- clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
- clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
- clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
- udelay(1000);
- clrbits_le32(&ccm->dram_clk_cfg, 0x01<<31);
-
- clock_set_pll5(CONFIG_DRAM_CLK * 1000000 * DRAM_CLK_MUL);
-
- clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV_MASK,
- CCM_DRAMCLK_CFG_DIV(DRAM_CLK_DIV) |
- CCM_DRAMCLK_CFG_RST | CCM_DRAMCLK_CFG_UPD);
- mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
-
- setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
- setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
- setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
- setbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE);
-
- para->rank = 2;
- para->bus_width = 16;
- mctl_set_cr(para);
-
- /* Set dram master access priority */
- writel(0x0000e00f, &mctl_ctl->clken); /* normal */
-
- udelay(250);
-}
-
-unsigned long sunxi_dram_init(void)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- struct dram_para para = {
- .cs1 = 0,
- .bank = 1,
- .rank = 1,
- .rows = 15,
- .bus_width = 16,
- .page_size = 2048,
- };
-
-#if defined(CONFIG_MACH_SUN8I_A83T)
-#if (CONFIG_DRAM_TYPE == 3) || (CONFIG_DRAM_TYPE == 7)
- para.dram_type = CONFIG_DRAM_TYPE;
-#else
-#error Unsupported DRAM type, Please set DRAM type (3:DDR3, 7:LPDDR3)
-#endif
-#endif
- setbits_le32(SUNXI_PRCM_BASE + 0x1e0, 0x1 << 8);
-
- writel(0, (SUNXI_PRCM_BASE + 0x1e8));
- udelay(10);
-
- mctl_sys_init(¶);
-
- if (mctl_channel_init(¶) != 0)
- return 0;
-
- auto_detect_dram_size(¶);
-
- /* Enable master software clk */
- writel(readl(&mctl_com->swonr) | 0x3ffff, &mctl_com->swonr);
-
- /* Set DRAM ODT MAP */
- if (para.rank == 2)
- writel(0x00000303, &mctl_ctl->odtmap);
- else
- writel(0x00000201, &mctl_ctl->odtmap);
-
- return para.page_size * (para.bus_width / 8) *
- (1 << (para.bank + para.rank + para.rows));
-}
+++ /dev/null
-/*
- * sun8i H3 platform dram controller init
- *
- * (C) Copyright 2007-2015 Allwinner Technology Co.
- * Jerry Wang <wangflord@allwinnertech.com>
- * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
- * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- * (C) Copyright 2015 Jens Kuske <jenskuske@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dram.h>
-#include <linux/kconfig.h>
-
-struct dram_para {
- u32 read_delays;
- u32 write_delays;
- u16 page_size;
- u8 bus_width;
- u8 dual_rank;
- u8 row_bits;
-};
-
-static inline int ns_to_t(int nanoseconds)
-{
- const unsigned int ctrl_freq = CONFIG_DRAM_CLK / 2;
-
- return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000);
-}
-
-static u32 bin_to_mgray(int val)
-{
- static const u8 lookup_table[32] = {
- 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05,
- 0x0c, 0x0d, 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09,
- 0x18, 0x19, 0x1a, 0x1b, 0x1e, 0x1f, 0x1c, 0x1d,
- 0x14, 0x15, 0x16, 0x17, 0x12, 0x13, 0x10, 0x11,
- };
-
- return lookup_table[clamp(val, 0, 31)];
-}
-
-static int mgray_to_bin(u32 val)
-{
- static const u8 lookup_table[32] = {
- 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05,
- 0x0e, 0x0f, 0x0c, 0x0d, 0x08, 0x09, 0x0a, 0x0b,
- 0x1e, 0x1f, 0x1c, 0x1d, 0x18, 0x19, 0x1a, 0x1b,
- 0x10, 0x11, 0x12, 0x13, 0x16, 0x17, 0x14, 0x15,
- };
-
- return lookup_table[val & 0x1f];
-}
-
-static void mctl_phy_init(u32 val)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- writel(val | PIR_INIT, &mctl_ctl->pir);
- mctl_await_completion(&mctl_ctl->pgsr[0], PGSR_INIT_DONE, 0x1);
-}
-
-static void mctl_dq_delay(u32 read, u32 write)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
- int i, j;
- u32 val;
-
- for (i = 0; i < 4; i++) {
- val = DATX_IOCR_WRITE_DELAY((write >> (i * 4)) & 0xf) |
- DATX_IOCR_READ_DELAY(((read >> (i * 4)) & 0xf) * 2);
-
- for (j = DATX_IOCR_DQ(0); j <= DATX_IOCR_DM; j++)
- writel(val, &mctl_ctl->datx[i].iocr[j]);
- }
-
- clrbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
-
- for (i = 0; i < 4; i++) {
- val = DATX_IOCR_WRITE_DELAY((write >> (16 + i * 4)) & 0xf) |
- DATX_IOCR_READ_DELAY((read >> (16 + i * 4)) & 0xf);
-
- writel(val, &mctl_ctl->datx[i].iocr[DATX_IOCR_DQS]);
- writel(val, &mctl_ctl->datx[i].iocr[DATX_IOCR_DQSN]);
- }
-
- setbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
-
- udelay(1);
-}
-
-static void mctl_set_master_priority(void)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
-
- /* enable bandwidth limit windows and set windows size 1us */
- writel(0x00010190, &mctl_com->bwcr);
-
- /* set cpu high priority */
- writel(0x00000001, &mctl_com->mapr);
-
- writel(0x0200000d, &mctl_com->mcr[0][0]);
- writel(0x00800100, &mctl_com->mcr[0][1]);
- writel(0x06000009, &mctl_com->mcr[1][0]);
- writel(0x01000400, &mctl_com->mcr[1][1]);
- writel(0x0200000d, &mctl_com->mcr[2][0]);
- writel(0x00600100, &mctl_com->mcr[2][1]);
- writel(0x0100000d, &mctl_com->mcr[3][0]);
- writel(0x00200080, &mctl_com->mcr[3][1]);
- writel(0x07000009, &mctl_com->mcr[4][0]);
- writel(0x01000640, &mctl_com->mcr[4][1]);
- writel(0x0100000d, &mctl_com->mcr[5][0]);
- writel(0x00200080, &mctl_com->mcr[5][1]);
- writel(0x01000009, &mctl_com->mcr[6][0]);
- writel(0x00400080, &mctl_com->mcr[6][1]);
- writel(0x0100000d, &mctl_com->mcr[7][0]);
- writel(0x00400080, &mctl_com->mcr[7][1]);
- writel(0x0100000d, &mctl_com->mcr[8][0]);
- writel(0x00400080, &mctl_com->mcr[8][1]);
- writel(0x04000009, &mctl_com->mcr[9][0]);
- writel(0x00400100, &mctl_com->mcr[9][1]);
- writel(0x2000030d, &mctl_com->mcr[10][0]);
- writel(0x04001800, &mctl_com->mcr[10][1]);
- writel(0x04000009, &mctl_com->mcr[11][0]);
- writel(0x00400120, &mctl_com->mcr[11][1]);
-}
-
-static void mctl_set_timing_params(struct dram_para *para)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- u8 tccd = 2;
- u8 tfaw = ns_to_t(50);
- u8 trrd = max(ns_to_t(10), 4);
- u8 trcd = ns_to_t(15);
- u8 trc = ns_to_t(53);
- u8 txp = max(ns_to_t(8), 3);
- u8 twtr = max(ns_to_t(8), 4);
- u8 trtp = max(ns_to_t(8), 4);
- u8 twr = max(ns_to_t(15), 3);
- u8 trp = ns_to_t(15);
- u8 tras = ns_to_t(38);
- u16 trefi = ns_to_t(7800) / 32;
- u16 trfc = ns_to_t(350);
-
- u8 tmrw = 0;
- u8 tmrd = 4;
- u8 tmod = 12;
- u8 tcke = 3;
- u8 tcksrx = 5;
- u8 tcksre = 5;
- u8 tckesr = 4;
- u8 trasmax = 24;
-
- u8 tcl = 6; /* CL 12 */
- u8 tcwl = 4; /* CWL 8 */
- u8 t_rdata_en = 4;
- u8 wr_latency = 2;
-
- u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */
- u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1; /* 360ns */
- u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
- u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
-
- u8 twtp = tcwl + 2 + twr; /* WL + BL / 2 + tWR */
- u8 twr2rd = tcwl + 2 + twtr; /* WL + BL / 2 + tWTR */
- u8 trd2wr = tcl + 2 + 1 - tcwl; /* RL + BL / 2 + 2 - WL */
-
- /* set mode register */
- writel(0x1c70, &mctl_ctl->mr[0]); /* CL=11, WR=12 */
- writel(0x40, &mctl_ctl->mr[1]);
- writel(0x18, &mctl_ctl->mr[2]); /* CWL=8 */
- writel(0x0, &mctl_ctl->mr[3]);
-
- /* set DRAM timing */
- writel(DRAMTMG0_TWTP(twtp) | DRAMTMG0_TFAW(tfaw) |
- DRAMTMG0_TRAS_MAX(trasmax) | DRAMTMG0_TRAS(tras),
- &mctl_ctl->dramtmg[0]);
- writel(DRAMTMG1_TXP(txp) | DRAMTMG1_TRTP(trtp) | DRAMTMG1_TRC(trc),
- &mctl_ctl->dramtmg[1]);
- writel(DRAMTMG2_TCWL(tcwl) | DRAMTMG2_TCL(tcl) |
- DRAMTMG2_TRD2WR(trd2wr) | DRAMTMG2_TWR2RD(twr2rd),
- &mctl_ctl->dramtmg[2]);
- writel(DRAMTMG3_TMRW(tmrw) | DRAMTMG3_TMRD(tmrd) | DRAMTMG3_TMOD(tmod),
- &mctl_ctl->dramtmg[3]);
- writel(DRAMTMG4_TRCD(trcd) | DRAMTMG4_TCCD(tccd) | DRAMTMG4_TRRD(trrd) |
- DRAMTMG4_TRP(trp), &mctl_ctl->dramtmg[4]);
- writel(DRAMTMG5_TCKSRX(tcksrx) | DRAMTMG5_TCKSRE(tcksre) |
- DRAMTMG5_TCKESR(tckesr) | DRAMTMG5_TCKE(tcke),
- &mctl_ctl->dramtmg[5]);
-
- /* set two rank timing */
- clrsetbits_le32(&mctl_ctl->dramtmg[8], (0xff << 8) | (0xff << 0),
- (0x66 << 8) | (0x10 << 0));
-
- /* set PHY interface timing, write latency and read latency configure */
- writel((0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) |
- (wr_latency << 0), &mctl_ctl->pitmg[0]);
-
- /* set PHY timing, PTR0-2 use default */
- writel(PTR3_TDINIT0(tdinit0) | PTR3_TDINIT1(tdinit1), &mctl_ctl->ptr[3]);
- writel(PTR4_TDINIT2(tdinit2) | PTR4_TDINIT3(tdinit3), &mctl_ctl->ptr[4]);
-
- /* set refresh timing */
- writel(RFSHTMG_TREFI(trefi) | RFSHTMG_TRFC(trfc), &mctl_ctl->rfshtmg);
-}
-
-static void mctl_zq_calibration(struct dram_para *para)
-{
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- int i;
- u16 zq_val[6];
- u8 val;
-
- writel(0x0a0a0a0a, &mctl_ctl->zqdr[2]);
-
- for (i = 0; i < 6; i++) {
- u8 zq = (CONFIG_DRAM_ZQ >> (i * 4)) & 0xf;
-
- writel((zq << 20) | (zq << 16) | (zq << 12) |
- (zq << 8) | (zq << 4) | (zq << 0),
- &mctl_ctl->zqcr);
-
- writel(PIR_CLRSR, &mctl_ctl->pir);
- mctl_phy_init(PIR_ZCAL);
-
- zq_val[i] = readl(&mctl_ctl->zqdr[0]) & 0xff;
- writel(REPEAT_BYTE(zq_val[i]), &mctl_ctl->zqdr[2]);
-
- writel(PIR_CLRSR, &mctl_ctl->pir);
- mctl_phy_init(PIR_ZCAL);
-
- val = readl(&mctl_ctl->zqdr[0]) >> 24;
- zq_val[i] |= bin_to_mgray(mgray_to_bin(val) - 1) << 8;
- }
-
- writel((zq_val[1] << 16) | zq_val[0], &mctl_ctl->zqdr[0]);
- writel((zq_val[3] << 16) | zq_val[2], &mctl_ctl->zqdr[1]);
- writel((zq_val[5] << 16) | zq_val[4], &mctl_ctl->zqdr[2]);
-}
-
-static void mctl_set_cr(struct dram_para *para)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
-
- writel(MCTL_CR_BL8 | MCTL_CR_2T | MCTL_CR_DDR3 | MCTL_CR_INTERLEAVED |
- MCTL_CR_EIGHT_BANKS | MCTL_CR_BUS_WIDTH(para->bus_width) |
- (para->dual_rank ? MCTL_CR_DUAL_RANK : MCTL_CR_SINGLE_RANK) |
- MCTL_CR_PAGE_SIZE(para->page_size) |
- MCTL_CR_ROW_BITS(para->row_bits), &mctl_com->cr);
-}
-
-static void mctl_sys_init(struct dram_para *para)
-{
- struct sunxi_ccm_reg * const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- clrbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
- clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
- clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
- clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
- clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
- udelay(10);
-
- clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
- udelay(1000);
-
- clock_set_pll5(CONFIG_DRAM_CLK * 2 * 1000000, false);
- clrsetbits_le32(&ccm->dram_clk_cfg,
- CCM_DRAMCLK_CFG_DIV_MASK | CCM_DRAMCLK_CFG_SRC_MASK,
- CCM_DRAMCLK_CFG_DIV(1) | CCM_DRAMCLK_CFG_SRC_PLL5 |
- CCM_DRAMCLK_CFG_UPD);
- mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
-
- setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
- setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
- setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
- setbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
-
- setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
- udelay(10);
-
- writel(0xc00e, &mctl_ctl->clken);
- udelay(500);
-}
-
-static int mctl_channel_init(struct dram_para *para)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- unsigned int i;
-
- mctl_set_cr(para);
- mctl_set_timing_params(para);
- mctl_set_master_priority();
-
- /* setting VTC, default disable all VT */
- clrbits_le32(&mctl_ctl->pgcr[0], (1 << 30) | 0x3f);
- clrsetbits_le32(&mctl_ctl->pgcr[1], 1 << 24, 1 << 26);
-
- /* increase DFI_PHY_UPD clock */
- writel(PROTECT_MAGIC, &mctl_com->protect);
- udelay(100);
- clrsetbits_le32(&mctl_ctl->upd2, 0xfff << 16, 0x50 << 16);
- writel(0x0, &mctl_com->protect);
- udelay(100);
-
- /* set dramc odt */
- for (i = 0; i < 4; i++)
- clrsetbits_le32(&mctl_ctl->datx[i].gcr, (0x3 << 4) |
- (0x1 << 1) | (0x3 << 2) | (0x3 << 12) |
- (0x3 << 14),
- IS_ENABLED(CONFIG_DRAM_ODT_EN) ? 0x0 : 0x2);
-
- /* AC PDR should always ON */
- setbits_le32(&mctl_ctl->aciocr, 0x1 << 1);
-
- /* set DQS auto gating PD mode */
- setbits_le32(&mctl_ctl->pgcr[2], 0x3 << 6);
-
- /* dx ddr_clk & hdr_clk dynamic mode */
- clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
-
- /* dphy & aphy phase select 270 degree */
- clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
- (0x1 << 10) | (0x2 << 8));
-
- /* set half DQ */
- if (para->bus_width != 32) {
- writel(0x0, &mctl_ctl->datx[2].gcr);
- writel(0x0, &mctl_ctl->datx[3].gcr);
- }
-
- /* data training configuration */
- clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24,
- (para->dual_rank ? 0x3 : 0x1) << 24);
-
-
- if (para->read_delays || para->write_delays) {
- mctl_dq_delay(para->read_delays, para->write_delays);
- udelay(50);
- }
-
- mctl_zq_calibration(para);
-
- mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST | PIR_DRAMRST |
- PIR_DRAMINIT | PIR_QSGATE);
-
- /* detect ranks and bus width */
- if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20)) {
- /* only one rank */
- if (((readl(&mctl_ctl->datx[0].gsr[0]) >> 24) & 0x2) ||
- ((readl(&mctl_ctl->datx[1].gsr[0]) >> 24) & 0x2)) {
- clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24, 0x1 << 24);
- para->dual_rank = 0;
- }
-
- /* only half DQ width */
- if (((readl(&mctl_ctl->datx[2].gsr[0]) >> 24) & 0x1) ||
- ((readl(&mctl_ctl->datx[3].gsr[0]) >> 24) & 0x1)) {
- writel(0x0, &mctl_ctl->datx[2].gcr);
- writel(0x0, &mctl_ctl->datx[3].gcr);
- para->bus_width = 16;
- }
-
- mctl_set_cr(para);
- udelay(20);
-
- /* re-train */
- mctl_phy_init(PIR_QSGATE);
- if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20))
- return 1;
- }
-
- /* check the dramc status */
- mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
-
- /* liuke added for refresh debug */
- setbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31);
- udelay(10);
- clrbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31);
- udelay(10);
-
- /* set PGCR3, CKE polarity */
- writel(0x00aa0060, &mctl_ctl->pgcr[3]);
-
- /* power down zq calibration module for power save */
- setbits_le32(&mctl_ctl->zqcr, ZQCR_PWRDOWN);
-
- /* enable master access */
- writel(0xffffffff, &mctl_com->maer);
-
- return 0;
-}
-
-static void mctl_auto_detect_dram_size(struct dram_para *para)
-{
- /* detect row address bits */
- para->page_size = 512;
- para->row_bits = 16;
- mctl_set_cr(para);
-
- for (para->row_bits = 11; para->row_bits < 16; para->row_bits++)
- if (mctl_mem_matches((1 << (para->row_bits + 3)) * para->page_size))
- break;
-
- /* detect page size */
- para->page_size = 8192;
- mctl_set_cr(para);
-
- for (para->page_size = 512; para->page_size < 8192; para->page_size *= 2)
- if (mctl_mem_matches(para->page_size))
- break;
-}
-
-unsigned long sunxi_dram_init(void)
-{
- struct sunxi_mctl_com_reg * const mctl_com =
- (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
- struct sunxi_mctl_ctl_reg * const mctl_ctl =
- (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
-
- struct dram_para para = {
- .read_delays = 0x00007979, /* dram_tpr12 */
- .write_delays = 0x6aaa0000, /* dram_tpr11 */
- .dual_rank = 0,
- .bus_width = 32,
- .row_bits = 15,
- .page_size = 4096,
- };
-
- mctl_sys_init(¶);
- if (mctl_channel_init(¶))
- return 0;
-
- if (para.dual_rank)
- writel(0x00000303, &mctl_ctl->odtmap);
- else
- writel(0x00000201, &mctl_ctl->odtmap);
- udelay(1);
-
- /* odt delay */
- writel(0x0c000400, &mctl_ctl->odtcfg);
-
- /* clear credit value */
- setbits_le32(&mctl_com->cccr, 1 << 31);
- udelay(10);
-
- mctl_auto_detect_dram_size(¶);
- mctl_set_cr(¶);
-
- return (1 << (para.row_bits + 3)) * para.page_size *
- (para.dual_rank ? 2 : 1);
-}
+++ /dev/null
-/*
- * Sunxi A31 Power Management Unit
- *
- * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
- * http://linux-sunxi.org
- *
- * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work
- *
- * (C) Copyright 2006-2013
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Berg Xing <bergxing@allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/p2wi.h>
-#include <asm/arch/prcm.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-
-void p2wi_init(void)
-{
- struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
-
- /* Enable p2wi and PIO clk, and de-assert their resets */
- prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI);
-
- sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA);
-
- /* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */
- writel(P2WI_CTRL_RESET, &p2wi->ctrl);
- sdelay(0x100);
- writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8),
- &p2wi->cc);
-}
-
-int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data)
-{
- struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
- unsigned long tmo = timer_get_us() + 1000000;
-
- writel(P2WI_PM_DEV_ADDR(slave_addr) |
- P2WI_PM_CTRL_ADDR(ctrl_reg) |
- P2WI_PM_INIT_DATA(init_data) |
- P2WI_PM_INIT_SEND,
- &p2wi->pm);
-
- while ((readl(&p2wi->pm) & P2WI_PM_INIT_SEND)) {
- if (timer_get_us() > tmo)
- return -ETIME;
- }
-
- return 0;
-}
-
-static int p2wi_await_trans(void)
-{
- struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
- unsigned long tmo = timer_get_us() + 1000000;
- int ret;
- u8 reg;
-
- while (1) {
- reg = readl(&p2wi->status);
- if (reg & P2WI_STAT_TRANS_ERR) {
- ret = -EIO;
- break;
- }
- if (reg & P2WI_STAT_TRANS_DONE) {
- ret = 0;
- break;
- }
- if (timer_get_us() > tmo) {
- ret = -ETIME;
- break;
- }
- }
- writel(reg, &p2wi->status); /* Clear status bits */
- return ret;
-}
-
-int p2wi_read(const u8 addr, u8 *data)
-{
- struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
- int ret;
-
- writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
- writel(P2WI_DATA_NUM_BYTES(1) |
- P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes);
- writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
- writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
-
- ret = p2wi_await_trans();
-
- *data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK;
- return ret;
-}
-
-int p2wi_write(const u8 addr, u8 data)
-{
- struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
-
- writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
- writel(P2WI_DATA_BYTE_1(data), &p2wi->data0);
- writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes);
- writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
- writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
-
- return p2wi_await_trans();
-}
+++ /dev/null
-/*
- * (C) Copyright 2007-2011
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/gpio.h>
-
-void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val)
-{
- u32 index = GPIO_CFG_INDEX(bank_offset);
- u32 offset = GPIO_CFG_OFFSET(bank_offset);
-
- clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset);
-}
-
-void sunxi_gpio_set_cfgpin(u32 pin, u32 val)
-{
- u32 bank = GPIO_BANK(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
-
- sunxi_gpio_set_cfgbank(pio, pin, val);
-}
-
-int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset)
-{
- u32 index = GPIO_CFG_INDEX(bank_offset);
- u32 offset = GPIO_CFG_OFFSET(bank_offset);
- u32 cfg;
-
- cfg = readl(&pio->cfg[0] + index);
- cfg >>= offset;
-
- return cfg & 0xf;
-}
-
-int sunxi_gpio_get_cfgpin(u32 pin)
-{
- u32 bank = GPIO_BANK(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
-
- return sunxi_gpio_get_cfgbank(pio, pin);
-}
-
-int sunxi_gpio_set_drv(u32 pin, u32 val)
-{
- u32 bank = GPIO_BANK(pin);
- u32 index = GPIO_DRV_INDEX(pin);
- u32 offset = GPIO_DRV_OFFSET(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
-
- clrsetbits_le32(&pio->drv[0] + index, 0x3 << offset, val << offset);
-
- return 0;
-}
-
-int sunxi_gpio_set_pull(u32 pin, u32 val)
-{
- u32 bank = GPIO_BANK(pin);
- u32 index = GPIO_PULL_INDEX(pin);
- u32 offset = GPIO_PULL_OFFSET(pin);
- struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
-
- clrsetbits_le32(&pio->pull[0] + index, 0x3 << offset, val << offset);
-
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * Sunxi PMIC bus access helpers
- *
- * The axp152 & axp209 use an i2c bus, the axp221 uses the p2wi bus and the
- * axp223 uses the rsb bus, these functions abstract this.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/p2wi.h>
-#include <asm/arch/rsb.h>
-#include <i2c.h>
-#include <asm/arch/pmic_bus.h>
-
-#define AXP152_I2C_ADDR 0x30
-
-#define AXP209_I2C_ADDR 0x34
-
-#define AXP221_CHIP_ADDR 0x68
-#define AXP221_CTRL_ADDR 0x3e
-#define AXP221_INIT_DATA 0x3e
-
-/* AXP818 device and runtime addresses are same as AXP223 */
-#define AXP223_DEVICE_ADDR 0x3a3
-#define AXP223_RUNTIME_ADDR 0x2d
-
-int pmic_bus_init(void)
-{
- /* This cannot be 0 because it is used in SPL before BSS is ready */
- static int needs_init = 1;
- __maybe_unused int ret;
-
- if (!needs_init)
- return 0;
-
-#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
-# ifdef CONFIG_MACH_SUN6I
- p2wi_init();
- ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
- AXP221_INIT_DATA);
-# else
- ret = rsb_init();
- if (ret)
- return ret;
-
- ret = rsb_set_device_address(AXP223_DEVICE_ADDR, AXP223_RUNTIME_ADDR);
-# endif
- if (ret)
- return ret;
-#endif
-
- needs_init = 0;
- return 0;
-}
-
-int pmic_bus_read(u8 reg, u8 *data)
-{
-#ifdef CONFIG_AXP152_POWER
- return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1);
-#elif defined CONFIG_AXP209_POWER
- return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
-#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
-# ifdef CONFIG_MACH_SUN6I
- return p2wi_read(reg, data);
-# else
- return rsb_read(AXP223_RUNTIME_ADDR, reg, data);
-# endif
-#endif
-}
-
-int pmic_bus_write(u8 reg, u8 data)
-{
-#ifdef CONFIG_AXP152_POWER
- return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1);
-#elif defined CONFIG_AXP209_POWER
- return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
-#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
-# ifdef CONFIG_MACH_SUN6I
- return p2wi_write(reg, data);
-# else
- return rsb_write(AXP223_RUNTIME_ADDR, reg, data);
-# endif
-#endif
-}
-
-int pmic_bus_setbits(u8 reg, u8 bits)
-{
- int ret;
- u8 val;
-
- ret = pmic_bus_read(reg, &val);
- if (ret)
- return ret;
-
- val |= bits;
- return pmic_bus_write(reg, val);
-}
-
-int pmic_bus_clrbits(u8 reg, u8 bits)
-{
- int ret;
- u8 val;
-
- ret = pmic_bus_read(reg, &val);
- if (ret)
- return ret;
-
- val &= ~bits;
- return pmic_bus_write(reg, val);
-}
+++ /dev/null
-/*
- * Sunxi A31 Power Management Unit
- *
- * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
- * http://linux-sunxi.org
- *
- * Based on sun6i sources and earlier U-Boot Allwinner A10 SPL work
- *
- * (C) Copyright 2006-2013
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Berg Xing <bergxing@allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/prcm.h>
-#include <asm/arch/sys_proto.h>
-
-/* APB0 clock gate and reset bit offsets are the same. */
-void prcm_apb0_enable(u32 flags)
-{
- struct sunxi_prcm_reg *prcm =
- (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
-
- /* open the clock for module */
- setbits_le32(&prcm->apb0_gate, flags);
-
- /* deassert reset for module */
- setbits_le32(&prcm->apb0_reset, flags);
-}
-
-void prcm_apb0_disable(u32 flags)
-{
- struct sunxi_prcm_reg *prcm =
- (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
-
- /* assert reset for module */
- clrbits_le32(&prcm->apb0_reset, flags);
-
- /* close the clock for module */
- clrbits_le32(&prcm->apb0_gate, flags);
-}
+++ /dev/null
-/*
- * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * Based on allwinner u-boot sources rsb code which is:
- * (C) Copyright 2007-2013
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * lixiang <lixiang@allwinnertech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <errno.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/prcm.h>
-#include <asm/arch/rsb.h>
-
-static int rsb_set_device_mode(void);
-
-static void rsb_cfg_io(void)
-{
-#ifdef CONFIG_MACH_SUN8I
- sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_GPL_R_RSB);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_GPL_R_RSB);
- sunxi_gpio_set_pull(SUNXI_GPL(0), 1);
- sunxi_gpio_set_pull(SUNXI_GPL(1), 1);
- sunxi_gpio_set_drv(SUNXI_GPL(0), 2);
- sunxi_gpio_set_drv(SUNXI_GPL(1), 2);
-#elif defined CONFIG_MACH_SUN9I
- sunxi_gpio_set_cfgpin(SUNXI_GPN(0), SUN9I_GPN_R_RSB);
- sunxi_gpio_set_cfgpin(SUNXI_GPN(1), SUN9I_GPN_R_RSB);
- sunxi_gpio_set_pull(SUNXI_GPN(0), 1);
- sunxi_gpio_set_pull(SUNXI_GPN(1), 1);
- sunxi_gpio_set_drv(SUNXI_GPN(0), 2);
- sunxi_gpio_set_drv(SUNXI_GPN(1), 2);
-#else
-#error unsupported MACH_SUNXI
-#endif
-}
-
-static void rsb_set_clk(void)
-{
- struct sunxi_rsb_reg * const rsb =
- (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
- u32 div = 0;
- u32 cd_odly = 0;
-
- /* Source is Hosc24M, set RSB clk to 3Mhz */
- div = 24000000 / 3000000 / 2 - 1;
- cd_odly = div >> 1;
- if (!cd_odly)
- cd_odly = 1;
-
- writel((cd_odly << 8) | div, &rsb->ccr);
-}
-
-int rsb_init(void)
-{
- struct sunxi_rsb_reg * const rsb =
- (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
-
- /* Enable RSB and PIO clk, and de-assert their resets */
- prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_RSB);
-
- /* Setup external pins */
- rsb_cfg_io();
-
- writel(RSB_CTRL_SOFT_RST, &rsb->ctrl);
- rsb_set_clk();
-
- return rsb_set_device_mode();
-}
-
-static int rsb_await_trans(void)
-{
- struct sunxi_rsb_reg * const rsb =
- (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
- unsigned long tmo = timer_get_us() + 1000000;
- u32 stat;
- int ret;
-
- while (1) {
- stat = readl(&rsb->stat);
- if (stat & RSB_STAT_LBSY_INT) {
- ret = -EBUSY;
- break;
- }
- if (stat & RSB_STAT_TERR_INT) {
- ret = -EIO;
- break;
- }
- if (stat & RSB_STAT_TOVER_INT) {
- ret = 0;
- break;
- }
- if (timer_get_us() > tmo) {
- ret = -ETIME;
- break;
- }
- }
- writel(stat, &rsb->stat); /* Clear status bits */
-
- return ret;
-}
-
-static int rsb_set_device_mode(void)
-{
- struct sunxi_rsb_reg * const rsb =
- (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
- unsigned long tmo = timer_get_us() + 1000000;
-
- writel(RSB_DMCR_DEVICE_MODE_START | RSB_DMCR_DEVICE_MODE_DATA,
- &rsb->dmcr);
-
- while (readl(&rsb->dmcr) & RSB_DMCR_DEVICE_MODE_START) {
- if (timer_get_us() > tmo)
- return -ETIME;
- }
-
- return rsb_await_trans();
-}
-
-static int rsb_do_trans(void)
-{
- struct sunxi_rsb_reg * const rsb =
- (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
-
- setbits_le32(&rsb->ctrl, RSB_CTRL_START_TRANS);
- return rsb_await_trans();
-}
-
-int rsb_set_device_address(u16 device_addr, u16 runtime_addr)
-{
- struct sunxi_rsb_reg * const rsb =
- (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
-
- writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_addr) |
- RSB_DEVADDR_DEVICE_ADDR(device_addr), &rsb->devaddr);
- writel(RSB_CMD_SET_RTSADDR, &rsb->cmd);
-
- return rsb_do_trans();
-}
-
-int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data)
-{
- struct sunxi_rsb_reg * const rsb =
- (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
-
- writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
- writel(reg_addr, &rsb->addr);
- writel(data, &rsb->data);
- writel(RSB_CMD_BYTE_WRITE, &rsb->cmd);
-
- return rsb_do_trans();
-}
-
-int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data)
-{
- struct sunxi_rsb_reg * const rsb =
- (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
- int ret;
-
- writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
- writel(reg_addr, &rsb->addr);
- writel(RSB_CMD_BYTE_READ, &rsb->cmd);
-
- ret = rsb_do_trans();
- if (ret)
- return ret;
-
- *data = readl(&rsb->data) & 0xff;
-
- return 0;
-}
+++ /dev/null
-/*
- * Sunxi usb-phy code
- *
- * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
- * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/usb_phy.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <errno.h>
-
-#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
-#ifdef CONFIG_MACH_SUN8I_A33
-#define SUNXI_USB_CSR 0x410
-#else
-#define SUNXI_USB_CSR 0x404
-#endif
-#define SUNXI_USB_PASSBY_EN 1
-
-#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
-#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
-#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
-#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
-
-#define REG_PHY_UNK_H3 0x420
-#define REG_PMU_UNK_H3 0x810
-
-static struct sunxi_usb_phy {
- int usb_rst_mask;
- int gpio_vbus;
- int gpio_vbus_det;
- int gpio_id_det;
- int id;
- int init_count;
- int power_on_count;
- int base;
-} sunxi_usb_phy[] = {
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
- .id = 0,
- .base = SUNXI_USB0_BASE,
- },
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
- .id = 1,
- .base = SUNXI_USB1_BASE,
- },
-#if CONFIG_SUNXI_USB_PHYS >= 3
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
- .id = 2,
- .base = SUNXI_USB2_BASE,
- },
-#endif
-#if CONFIG_SUNXI_USB_PHYS >= 4
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY3_RST | CCM_USB_CTRL_PHY3_CLK,
- .id = 3,
- .base = SUNXI_USB3_BASE,
- }
-#endif
-};
-
-static int get_vbus_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
- case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
- case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
- case 3: return sunxi_name_to_gpio(CONFIG_USB3_VBUS_PIN);
- }
- return -EINVAL;
-}
-
-static int get_vbus_detect_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
- }
- return -EINVAL;
-}
-
-static int get_id_detect_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET);
- }
- return -EINVAL;
-}
-
-static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
- int data, int len)
-{
- int j = 0, usbc_bit = 0;
- void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
-
-#ifdef CONFIG_MACH_SUN8I_A33
- /* CSR needs to be explicitly initialized to 0 on A33 */
- writel(0, dest);
-#endif
-
- usbc_bit = 1 << (phy->id * 2);
- for (j = 0; j < len; j++) {
- /* set the bit address to be written */
- clrbits_le32(dest, 0xff << 8);
- setbits_le32(dest, (addr + j) << 8);
-
- clrbits_le32(dest, usbc_bit);
- /* set data bit */
- if (data & 0x1)
- setbits_le32(dest, 1 << 7);
- else
- clrbits_le32(dest, 1 << 7);
-
- setbits_le32(dest, usbc_bit);
-
- clrbits_le32(dest, usbc_bit);
-
- data >>= 1;
- }
-}
-
-#if defined CONFIG_MACH_SUN8I_H3
-static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
-{
- if (phy->id == 0)
- clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
-
- clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02);
-}
-#else
-static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
-{
- /* The following comments are machine
- * translated from Chinese, you have been warned!
- */
-
- /* Regulation 45 ohms */
- if (phy->id == 0)
- usb_phy_write(phy, 0x0c, 0x01, 1);
-
- /* adjust PHY's magnitude and rate */
- usb_phy_write(phy, 0x20, 0x14, 5);
-
- /* threshold adjustment disconnect */
-#if defined CONFIG_MACH_SUN5I || defined CONFIG_MACH_SUN7I
- usb_phy_write(phy, 0x2a, 2, 2);
-#else
- usb_phy_write(phy, 0x2a, 3, 2);
-#endif
-
- return;
-}
-#endif
-
-static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
-{
- unsigned long bits = 0;
- void *addr;
-
- addr = (void *)phy->base + SUNXI_USB_PMU_IRQ_ENABLE;
-
- bits = SUNXI_EHCI_AHB_ICHR8_EN |
- SUNXI_EHCI_AHB_INCR4_BURST_EN |
- SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
- SUNXI_EHCI_ULPI_BYPASS_EN;
-
- if (enable)
- setbits_le32(addr, bits);
- else
- clrbits_le32(addr, bits);
-
- return;
-}
-
-void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
-}
-
-void sunxi_usb_phy_init(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- phy->init_count++;
- if (phy->init_count != 1)
- return;
-
- setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
-
- sunxi_usb_phy_config(phy);
-
- if (phy->id != 0)
- sunxi_usb_phy_passby(phy, SUNXI_USB_PASSBY_EN);
-}
-
-void sunxi_usb_phy_exit(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- phy->init_count--;
- if (phy->init_count != 0)
- return;
-
- if (phy->id != 0)
- sunxi_usb_phy_passby(phy, !SUNXI_USB_PASSBY_EN);
-
- clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
-}
-
-void sunxi_usb_phy_power_on(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- phy->power_on_count++;
- if (phy->power_on_count != 1)
- return;
-
- if (phy->gpio_vbus >= 0)
- gpio_set_value(phy->gpio_vbus, 1);
-}
-
-void sunxi_usb_phy_power_off(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- phy->power_on_count--;
- if (phy->power_on_count != 0)
- return;
-
- if (phy->gpio_vbus >= 0)
- gpio_set_value(phy->gpio_vbus, 0);
-}
-
-int sunxi_usb_phy_power_is_on(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- return phy->power_on_count > 0;
-}
-
-int sunxi_usb_phy_vbus_detect(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- int err, retries = 3;
-
- if (phy->gpio_vbus_det < 0)
- return phy->gpio_vbus_det;
-
- err = gpio_get_value(phy->gpio_vbus_det);
- /*
- * Vbus may have been provided by the board and just been turned of
- * some milliseconds ago on reset, what we're measuring then is a
- * residual charge on Vbus, sleep a bit and try again.
- */
- while (err > 0 && retries--) {
- mdelay(100);
- err = gpio_get_value(phy->gpio_vbus_det);
- }
-
- return err;
-}
-
-int sunxi_usb_phy_id_detect(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- if (phy->gpio_id_det < 0)
- return phy->gpio_id_det;
-
- return gpio_get_value(phy->gpio_id_det);
-}
-
-int sunxi_usb_phy_probe(void)
-{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_usb_phy *phy;
- int i, ret = 0;
-
- for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
- phy = &sunxi_usb_phy[i];
-
- phy->gpio_vbus = get_vbus_gpio(i);
- if (phy->gpio_vbus >= 0) {
- ret = gpio_request(phy->gpio_vbus, "usb_vbus");
- if (ret)
- return ret;
- ret = gpio_direction_output(phy->gpio_vbus, 0);
- if (ret)
- return ret;
- }
-
- phy->gpio_vbus_det = get_vbus_detect_gpio(i);
- if (phy->gpio_vbus_det >= 0) {
- ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
- if (ret)
- return ret;
- ret = gpio_direction_input(phy->gpio_vbus_det);
- if (ret)
- return ret;
- }
-
- phy->gpio_id_det = get_id_detect_gpio(i);
- if (phy->gpio_id_det >= 0) {
- ret = gpio_request(phy->gpio_id_det, "usb_id_det");
- if (ret)
- return ret;
- ret = gpio_direction_input(phy->gpio_id_det);
- if (ret)
- return ret;
- sunxi_gpio_set_pull(phy->gpio_id_det,
- SUNXI_GPIO_PULL_UP);
- }
- }
-
- setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
- return 0;
-}
-
-int sunxi_usb_phy_remove(void)
-{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_usb_phy *phy;
- int i;
-
- clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
- for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
- phy = &sunxi_usb_phy[i];
-
- if (phy->gpio_vbus >= 0)
- gpio_free(phy->gpio_vbus);
-
- if (phy->gpio_vbus_det >= 0)
- gpio_free(phy->gpio_vbus_det);
-
- if (phy->gpio_id_det >= 0)
- gpio_free(phy->gpio_id_det);
- }
-
- return 0;
-}
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-plus.dtb
+dtb-$(CONFIG_MACH_SUN50I) += \
+ pine64_plus.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
--- /dev/null
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ * based on the Allwinner H3 dtsi:
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ compatible = "allwinner,a64";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <2>;
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <3>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2", "arm,psci";
+ method = "smc";
+ cpu_suspend = <0xc4000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0xc4000003>;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ pll1: clk@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll1";
+ };
+
+ pll6: clk@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun6i-a31-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6", "pll6x2";
+ };
+
+ pll6d2: pll6d2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&pll6 0>;
+ clock-output-names = "pll6d2";
+ };
+
+ /* dummy clock until pll6 can be reused */
+ pll8: pll8_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <1>;
+ clock-output-names = "pll8";
+ };
+
+ cpu: cpu_clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-cpu-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+ clock-output-names = "cpu";
+ };
+
+ axi: axi_clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-axi-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&cpu>;
+ clock-output-names = "axi";
+ };
+
+ ahb1: ahb1_clk@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun6i-a31-ahb1-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+ clock-output-names = "ahb1";
+ };
+
+ ahb2: ahb2_clk@01c2005c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-h3-ahb2-clk";
+ reg = <0x01c2005c 0x4>;
+ clocks = <&ahb1>, <&pll6d2>;
+ clock-output-names = "ahb2";
+ };
+
+ apb1: apb1_clk@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb0-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&ahb1>;
+ clock-output-names = "apb1";
+ };
+
+ apb2: apb2_clk@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb1-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6 1>, <&pll6 1>;
+ clock-output-names = "apb2";
+ };
+
+ bus_gates: clk@01c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,a64-bus-gates-clk",
+ "allwinner,sun8i-h3-bus-gates-clk";
+ reg = <0x01c20060 0x14>;
+ clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
+ clock-names = "ahb1", "ahb2", "apb1", "apb2";
+ clock-indices = <1>,
+ <5>, <6>, <8>,
+ <9>, <10>, <13>,
+ <14>, <17>, <18>,
+ <19>, <20>,
+ <21>, <23>,
+ <24>, <25>,
+ <28>, <29>,
+ <32>, <35>,
+ <36>, <37>,
+ <40>, <43>,
+ <44>, <52>, <53>,
+ <54>, <64>,
+ <65>, <69>, <72>,
+ <76>, <77>, <78>,
+ <96>, <97>, <98>,
+ <101>,
+ <112>, <113>,
+ <114>, <115>,
+ <116>, <135>;
+ clock-output-names = "bus_mipidsi",
+ "bus_ce", "bus_dma", "bus_mmc0",
+ "bus_mmc1", "bus_mmc2", "bus_nand",
+ "bus_sdram", "bus_gmac", "bus_ts",
+ "bus_hstimer", "bus_spi0",
+ "bus_spi1", "bus_otg",
+ "bus_otg_ehci0", "bus_ehci0",
+ "bus_otg_ohci0", "bus_ohci0",
+ "bus_ve", "bus_lcd0",
+ "bus_lcd1", "bus_deint",
+ "bus_csi", "bus_hdmi",
+ "bus_de", "bus_gpu", "bus_msgbox",
+ "bus_spinlock", "bus_codec",
+ "bus_spdif", "bus_pio", "bus_ths",
+ "bus_i2s0", "bus_i2s1", "bus_i2s2",
+ "bus_i2c0", "bus_i2c1", "bus_i2c2",
+ "bus_scr",
+ "bus_uart0", "bus_uart1",
+ "bus_uart2", "bus_uart3",
+ "bus_uart4", "bus_dbg";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clock-output-names = "mmc0",
+ "mmc0_output",
+ "mmc0_sample";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clock-output-names = "mmc1",
+ "mmc1_output",
+ "mmc1_sample";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+ clock-output-names = "mmc2",
+ "mmc2_output",
+ "mmc2_sample";
+ };
+ };
+
+ regulators {
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&bus_gates 8>,
+ <&mmc0_clk 0>,
+ <&mmc0_clk 1>,
+ <&mmc0_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ahb_rst 8>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&bus_gates 9>,
+ <&mmc1_clk 0>,
+ <&mmc1_clk 1>,
+ <&mmc1_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ahb_rst 9>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&bus_gates 10>,
+ <&mmc2_clk 0>,
+ <&mmc2_clk 1>,
+ <&mmc2_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ahb_rst 10>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pio: pinctrl@01c20800 {
+ compatible = "allwinner,a64-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 69>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PB8", "PB9";
+ allwinner,function = "uart0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart0_pins_b: uart0@1 {
+ allwinner,pins = "PF2", "PF3";
+ allwinner,function = "uart0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart1_pins: uart1@0 {
+ allwinner,pins = "PG6", "PG7", "PG8", "PG9";
+ allwinner,function = "uart1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart2_pins: uart2@0 {
+ allwinner,pins = "PB0", "PB1", "PB2", "PB3";
+ allwinner,function = "uart2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart3_pins_a: uart3@0 {
+ allwinner,pins = "PD0", "PD1";
+ allwinner,function = "uart3";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart3_pins_b: uart3@1 {
+ allwinner,pins = "PH4", "PH5", "PH6", "PH7";
+ allwinner,function = "uart3";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ uart4_pins: uart4@0 {
+ allwinner,pins = "PD2", "PD3", "PD4", "PD5";
+ allwinner,function = "uart4";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_pins: mmc0@0 {
+ allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_default_cd_pin: mmc0_cd_pin@0 {
+ allwinner,pins = "PF6";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ mmc1_pins: mmc1@0 {
+ allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ allwinner,function = "mmc1";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc2_pins: mmc2@0 {
+ allwinner,pins = "PC1", "PC5", "PC6", "PC8",
+ "PC9", "PC10";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ ahb_rst: reset@01c202c0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-ahb1-reset";
+ reg = <0x01c202c0 0xc>;
+ };
+
+ apb1_rst: reset@01c202d0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d0 0x4>;
+ };
+
+ apb2_rst: reset@01c202d8 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d8 0x4>;
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 112>;
+ resets = <&apb2_rst 16>;
+ reset-names = "apb2";
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 113>;
+ resets = <&apb2_rst 17>;
+ reset-names = "apb2";
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 114>;
+ resets = <&apb2_rst 18>;
+ reset-names = "apb2";
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 115>;
+ resets = <&apb2_rst 19>;
+ reset-names = "apb2";
+ status = "disabled";
+ };
+
+ uart4: serial@01c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&bus_gates 116>;
+ resets = <&apb2_rst 20>;
+ reset-names = "apb2";
+ status = "disabled";
+ };
+
+ rtc: rtc@01f00000 {
+ compatible = "allwinner,sun6i-a31-rtc";
+ reg = <0x01f00000 0x54>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gic: interrupt-controller@{
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x01C81000 0x1000>,
+ <0x01C82000 0x2000>,
+ <0x01C84000 0x2000>,
+ <0x01C86000 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x45000000 0x00200000;
+/memreserve/ 0x41010000 0x00010800;
+/memreserve/ 0x40100000 0x00006000;
+
+#include "pine64_common.dtsi"
+
+/ {
+ model = "Pine64";
+ compatible = "pine64,pine64", "allwinner,a64";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x40000000 0x20000000>;
+ };
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "a64.dtsi"
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>, <&mmc0_default_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ cd-gpios = <&pio 5 6 0>;
+ cd-inverted;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_a>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x45000000 0x00200000;
+/memreserve/ 0x41010000 0x00010800;
+/memreserve/ 0x40100000 0x00006000;
+
+#include "pine64_common.dtsi"
+
+/ {
+ model = "Pine64+";
+ compatible = "pine64,pine64_plus", "allwinner,a64";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* There is a model with 2GB of DRAM, but U-Boot fixes this for us. */
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+};
};
};
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
status = "okay";
};
+
+&usb_otg {
+ status = "okay";
+};
};
};
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
status = "okay";
};
+
+&usb_otg {
+ status = "okay";
+};
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
+
+ usb_otg: usb@01c19000 {
+ compatible = "allwinner,sun8i-a33-musb";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ status = "disabled";
+ };
+
+ ehci0: usb@01c1a000 {
+ compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ohci0: usb@01c1a400 {
+ compatible = "allwinner,sun8i-a83t-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ehci1: usb@01c1b000 {
+ compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci";
+ reg = <0x01c1b000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ r_pio: pinctrl@01f02c00 {
+ compatible = "allwinner,sun8i-a83t-r-pinctrl";
+ reg = <0x01f02c00 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
};
/* clock control module regs definition */
#if defined(CONFIG_MACH_SUN8I_A83T)
#include <asm/arch/clock_sun8i_a83t.h>
-#elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
+#elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \
+ defined(CONFIG_MACH_SUN50I)
#include <asm/arch/clock_sun6i.h>
#elif defined(CONFIG_MACH_SUN9I)
#include <asm/arch/clock_sun9i.h>
#define CCM_HDMI_CTRL_DDC_GATE (0x1 << 30)
#define CCM_HDMI_CTRL_GATE (0x1 << 31)
-#ifndef CONFIG_MACH_SUN8I
-#define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */
-#else
+#if defined(CONFIG_MACH_SUN50I)
+#define MBUS_CLK_DEFAULT 0x81000002 /* PLL6x2 / 3 */
+#elif defined(CONFIG_MACH_SUN8I)
#define MBUS_CLK_DEFAULT 0x81000003 /* PLL6 / 4 */
+#else
+#define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */
#endif
#define MBUS_CLK_GATE (0x1 << 31)
#define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
-#define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
+#define CCM_USB_CTRL_HSIC_RST (0x1 << 2)
/* There is no global phy clk gate on sun6i, define as 0 */
#define CCM_USB_CTRL_PHYGATE 0
#define CCM_USB_CTRL_PHY0_CLK (0x1 << 8)
#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
-#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
+#define CCM_USB_CTRL_HSIC_CLK (0x1 << 10)
+#define CCM_USB_CTRL_12M_CLK (0x1 << 11)
#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
-#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0
#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1
#define SUN8I_GPB_UART2 2
#define SUN8I_A33_GPB_UART0 3
#define SUN8I_A83T_GPB_UART0 2
+#define SUN50I_GPB_UART0 4
#define SUNXI_GPC_NAND 2
#define SUNXI_GPC_SDC2 3
#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */
#define SPL_HEADER_VERSION 1
-/* Note: A80 will require special handling here: SPL_ADDR 0x10000 */
+#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
+#define SPL_ADDR 0x10000
+#else
#define SPL_ADDR 0x0
+#endif
/* boot head definition from sun4i boot code */
struct boot_file_head {
--- /dev/null
+#
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+#
+# Based on some other Makefile
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += board.o
+obj-y += clock.o
+obj-y += cpu_info.o
+obj-y += dram_helpers.o
+obj-y += pinmux.o
+ifndef CONFIG_MACH_SUN9I
+obj-y += usb_phy.o
+endif
+obj-$(CONFIG_MACH_SUN6I) += prcm.o
+obj-$(CONFIG_MACH_SUN8I) += prcm.o
+obj-$(CONFIG_MACH_SUN9I) += prcm.o
+obj-$(CONFIG_MACH_SUN6I) += p2wi.o
+obj-$(CONFIG_MACH_SUN8I) += rsb.o
+obj-$(CONFIG_MACH_SUN9I) += rsb.o
+obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
+obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
+obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
+obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o
+obj-$(CONFIG_MACH_SUN50I) += clock_sun6i.o
+ifdef CONFIG_MACH_SUN8I_A83T
+obj-y += clock_sun8i_a83t.o
+else
+obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
+endif
+obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o
+
+obj-$(CONFIG_AXP152_POWER) += pmic_bus.o
+obj-$(CONFIG_AXP209_POWER) += pmic_bus.o
+obj-$(CONFIG_AXP221_POWER) += pmic_bus.o
+obj-$(CONFIG_AXP818_POWER) += pmic_bus.o
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o
+obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
+obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o
+obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
+obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
+obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
+obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
+obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o
+endif
--- /dev/null
+/*
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ *
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * Some init for sunxi platform.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <i2c.h>
+#include <serial.h>
+#ifdef CONFIG_SPL_BUILD
+#include <spl.h>
+#endif
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/spl.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/tzpc.h>
+#include <asm/arch/mmc.h>
+
+#include <linux/compiler.h>
+
+struct fel_stash {
+ uint32_t sp;
+ uint32_t lr;
+ uint32_t cpsr;
+ uint32_t sctlr;
+ uint32_t vbar;
+ uint32_t cr;
+};
+
+struct fel_stash fel_stash __attribute__((section(".data")));
+
+#ifdef CONFIG_MACH_SUN50I
+#include <asm/armv8/mmu.h>
+
+static struct mm_region sunxi_mem_map[] = {
+ {
+ /* SRAM, MMIO regions */
+ .base = 0x0UL,
+ .size = 0x40000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE
+ }, {
+ /* RAM */
+ .base = 0x40000000UL,
+ .size = 0x80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+struct mm_region *mem_map = sunxi_mem_map;
+#endif
+
+static int gpio_init(void)
+{
+#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+ /* disable GPB22,23 as uart0 tx,rx to avoid conflict */
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
+#endif
+#if defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0);
+#else
+ sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0);
+#endif
+ sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
+#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I))
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB_UART0);
+ sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN5I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB_UART0);
+ sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH_UART0);
+ sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A33)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0);
+ sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_H3)
+ sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
+ sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN50I_GPB_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN50I_GPB_UART0);
+ sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);
+ sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0);
+ sunxi_gpio_set_pull(SUNXI_GPH(13), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
+ sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_GPB_UART2);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
+ sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL_R_UART);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL_R_UART);
+ sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
+#else
+#error Unsupported console port number. Please fix pin mux settings in board.c
+#endif
+
+ return 0;
+}
+
+int spl_board_load_image(void)
+{
+ debug("Returning to FEL sp=%x, lr=%x\n", fel_stash.sp, fel_stash.lr);
+ return_to_fel(fel_stash.sp, fel_stash.lr);
+
+ return 0;
+}
+
+void s_init(void)
+{
+ /*
+ * Undocumented magic taken from boot0, without this DRAM
+ * access gets messed up (seems cache related).
+ * The boot0 sources describe this as: "config ema for cache sram"
+ */
+#if defined CONFIG_MACH_SUN6I
+ setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
+#elif defined CONFIG_MACH_SUN8I
+ __maybe_unused uint version;
+
+ /* Unlock sram version info reg, read it, relock */
+ setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
+ version = readl(SUNXI_SRAMC_BASE + 0x24) >> 16;
+ clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
+
+ /*
+ * Ideally this would be a switch case, but we do not know exactly
+ * which versions there are and which version needs which settings,
+ * so reproduce the per SoC code from the BSP.
+ */
+#if defined CONFIG_MACH_SUN8I_A23
+ if (version == 0x1650)
+ setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
+ else /* 0x1661 ? */
+ setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0);
+#elif defined CONFIG_MACH_SUN8I_A33
+ if (version != 0x1667)
+ setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0);
+#endif
+ /* A83T BSP never modifies SUNXI_SRAMC_BASE + 0x44 */
+ /* No H3 BSP, boot0 seems to not modify SUNXI_SRAMC_BASE + 0x44 */
+#endif
+
+#if defined CONFIG_MACH_SUN6I || \
+ defined CONFIG_MACH_SUN7I || \
+ defined CONFIG_MACH_SUN8I
+ /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
+ asm volatile(
+ "mrc p15, 0, r0, c1, c0, 1\n"
+ "orr r0, r0, #1 << 6\n"
+ "mcr p15, 0, r0, c1, c0, 1\n");
+#endif
+#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_H3
+ /* Enable non-secure access to some peripherals */
+ tzpc_init();
+#endif
+
+ clock_init();
+ timer_init();
+ gpio_init();
+ i2c_init_board();
+ eth_init_board();
+}
+
+#ifdef CONFIG_SPL_BUILD
+DECLARE_GLOBAL_DATA_PTR;
+
+/* The sunxi internal brom will try to loader external bootloader
+ * from mmc0, nand flash, mmc2.
+ */
+u32 spl_boot_device(void)
+{
+ __maybe_unused struct mmc *mmc0, *mmc1;
+ /*
+ * When booting from the SD card or NAND memory, the "eGON.BT0"
+ * signature is expected to be found in memory at the address 0x0004
+ * (see the "mksunxiboot" tool, which generates this header).
+ *
+ * When booting in the FEL mode over USB, this signature is patched in
+ * memory and replaced with something else by the 'fel' tool. This other
+ * signature is selected in such a way, that it can't be present in a
+ * valid bootable SD card image (because the BROM would refuse to
+ * execute the SPL in this case).
+ *
+ * This checks for the signature and if it is not found returns to
+ * the FEL code in the BROM to wait and receive the main u-boot
+ * binary over USB. If it is found, it determines where SPL was
+ * read from.
+ */
+ if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */
+ return BOOT_DEVICE_BOARD;
+
+ /* The BROM will try to boot from mmc0 first, so try that first. */
+#ifdef CONFIG_MMC
+ mmc_initialize(gd->bd);
+ mmc0 = find_mmc_device(0);
+ if (sunxi_mmc_has_egon_boot_signature(mmc0))
+ return BOOT_DEVICE_MMC1;
+#endif
+
+ /* Fallback to booting NAND if enabled. */
+ if (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT))
+ return BOOT_DEVICE_NAND;
+
+#ifdef CONFIG_MMC
+ if (CONFIG_MMC_SUNXI_SLOT_EXTRA == 2) {
+ mmc1 = find_mmc_device(1);
+ if (sunxi_mmc_has_egon_boot_signature(mmc1))
+ return BOOT_DEVICE_MMC2;
+ }
+#endif
+
+ panic("Could not determine boot source\n");
+ return -1; /* Never reached */
+}
+
+/* No confirmation data available in SPL yet. Hardcode bootmode */
+u32 spl_boot_mode(void)
+{
+ return MMCSD_MODE_RAW;
+}
+
+void board_init_f(ulong dummy)
+{
+ spl_init();
+ preloader_console_init();
+
+#ifdef CONFIG_SPL_I2C_SUPPORT
+ /* Needed early by sunxi_board_init if PMU is enabled */
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+ sunxi_board_init();
+}
+#endif
+
+void reset_cpu(ulong addr)
+{
+#ifdef CONFIG_SUNXI_GEN_SUN4I
+ static const struct sunxi_wdog *wdog =
+ &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+
+ /* Set the watchdog for its shortest interval (.5s) and wait */
+ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
+ writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
+
+ while (1) {
+ /* sun5i sometimes gets stuck without this */
+ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
+ }
+#endif
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+ static const struct sunxi_wdog *wdog =
+ ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+
+ /* Set the watchdog for its shortest interval (.5s) and wait */
+ writel(WDT_CFG_RESET, &wdog->cfg);
+ writel(WDT_MODE_EN, &wdog->mode);
+ writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
+ while (1) { }
+#endif
+}
+
+#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+__weak void clock_init_sec(void)
+{
+}
+
+int clock_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+ clock_init_safe();
+#endif
+ clock_init_uart();
+ clock_init_sec();
+
+ return 0;
+}
+
+/* These functions are shared between various SoCs so put them here. */
+#if defined CONFIG_SUNXI_GEN_SUN6I && !defined CONFIG_MACH_SUN9I
+int clock_twi_onoff(int port, int state)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (port == 5) {
+ if (state)
+ prcm_apb0_enable(
+ PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
+ else
+ prcm_apb0_disable(
+ PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
+ return 0;
+ }
+
+ /* set the apb clock gate and reset for twi */
+ if (state) {
+ setbits_le32(&ccm->apb2_gate,
+ CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port));
+ setbits_le32(&ccm->apb2_reset_cfg,
+ 1 << (APB2_RESET_TWI_SHIFT + port));
+ } else {
+ clrbits_le32(&ccm->apb2_reset_cfg,
+ 1 << (APB2_RESET_TWI_SHIFT + port));
+ clrbits_le32(&ccm->apb2_gate,
+ CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port));
+ }
+
+ return 0;
+}
+#endif
--- /dev/null
+/*
+ * sun4i, sun5i and sun7i specific clock code
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sys_proto.h>
+
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* Set safe defaults until PMU is configured */
+ writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+ AHB_DIV_2 << AHB_DIV_SHIFT |
+ APB0_DIV_1 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+ writel(PLL1_CFG_DEFAULT, &ccm->pll1_cfg);
+ sdelay(200);
+ writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+ AHB_DIV_2 << AHB_DIV_SHIFT |
+ APB0_DIV_1 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+#ifdef CONFIG_MACH_SUN7I
+ setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_DMA);
+#endif
+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+#ifdef CONFIG_SUNXI_AHCI
+ setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_SATA);
+ setbits_le32(&ccm->pll6_cfg, 0x1 << CCM_PLL6_CTRL_SATA_EN_SHIFT);
+#endif
+}
+#endif
+
+void clock_init_uart(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* uart clock source is apb1 */
+ writel(APB1_CLK_SRC_OSC24M|
+ APB1_CLK_RATE_N_1|
+ APB1_CLK_RATE_M(1),
+ &ccm->apb1_clk_div_cfg);
+
+ /* open the clock for uart */
+ setbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT+CONFIG_CONS_INDEX - 1));
+}
+
+int clock_twi_onoff(int port, int state)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* set the apb clock gate for twi */
+ if (state)
+ setbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
+ else
+ clrbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
+
+ return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+#define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \
+ 0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \
+ 8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \
+ 0 << CCM_PLL1_CFG_PLL4_EXCH_SHIFT | \
+ 16 << CCM_PLL1_CFG_BIAS_CUR_SHIFT | \
+ (P)<< CCM_PLL1_CFG_DIVP_SHIFT | \
+ 2 << CCM_PLL1_CFG_LCK_TMR_SHIFT | \
+ (N)<< CCM_PLL1_CFG_FACTOR_N_SHIFT | \
+ (K)<< CCM_PLL1_CFG_FACTOR_K_SHIFT | \
+ 0 << CCM_PLL1_CFG_SIG_DELT_PAT_IN_SHIFT | \
+ 0 << CCM_PLL1_CFG_SIG_DELT_PAT_EN_SHIFT | \
+ (M)<< CCM_PLL1_CFG_FACTOR_M_SHIFT)
+
+static struct {
+ u32 pll1_cfg;
+ unsigned int freq;
+} pll1_para[] = {
+ /* This array must be ordered by frequency. */
+ { PLL1_CFG(31, 1, 0, 0), 1488000000},
+ { PLL1_CFG(30, 1, 0, 0), 1440000000},
+ { PLL1_CFG(29, 1, 0, 0), 1392000000},
+ { PLL1_CFG(28, 1, 0, 0), 1344000000},
+ { PLL1_CFG(27, 1, 0, 0), 1296000000},
+ { PLL1_CFG(26, 1, 0, 0), 1248000000},
+ { PLL1_CFG(25, 1, 0, 0), 1200000000},
+ { PLL1_CFG(24, 1, 0, 0), 1152000000},
+ { PLL1_CFG(23, 1, 0, 0), 1104000000},
+ { PLL1_CFG(22, 1, 0, 0), 1056000000},
+ { PLL1_CFG(21, 1, 0, 0), 1008000000},
+ { PLL1_CFG(20, 1, 0, 0), 960000000 },
+ { PLL1_CFG(19, 1, 0, 0), 912000000 },
+ { PLL1_CFG(16, 1, 0, 0), 768000000 },
+ /* Final catchall entry 384MHz*/
+ { PLL1_CFG(16, 0, 0, 0), 0 },
+
+};
+
+void clock_set_pll1(unsigned int hz)
+{
+ int i = 0;
+ int axi, ahb, apb0;
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* Find target frequency */
+ while (pll1_para[i].freq > hz)
+ i++;
+
+ hz = pll1_para[i].freq;
+ if (! hz)
+ hz = 384000000;
+
+ /* Calculate system clock divisors */
+ axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */
+ ahb = DIV_ROUND_UP(hz/axi, 204000000); /* Max 250MHz */
+ apb0 = 2; /* Max 150MHz */
+
+ printf("CPU: %uHz, AXI/AHB/APB: %d/%d/%d\n", hz, axi, ahb, apb0);
+
+ /* Map divisors to register values */
+ axi = axi - 1;
+ if (ahb > 4)
+ ahb = 3;
+ else if (ahb > 2)
+ ahb = 2;
+ else if (ahb > 1)
+ ahb = 1;
+ else
+ ahb = 0;
+
+ apb0 = apb0 - 1;
+
+ /* Switch to 24MHz clock while changing PLL1 */
+ writel(AXI_DIV_1 << AXI_DIV_SHIFT |
+ AHB_DIV_2 << AHB_DIV_SHIFT |
+ APB0_DIV_1 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+ sdelay(20);
+
+ /* Configure sys clock divisors */
+ writel(axi << AXI_DIV_SHIFT |
+ ahb << AHB_DIV_SHIFT |
+ apb0 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+
+ /* Configure PLL1 at the desired frequency */
+ writel(pll1_para[i].pll1_cfg, &ccm->pll1_cfg);
+ sdelay(200);
+
+ /* Switch CPU to PLL1 */
+ writel(axi << AXI_DIV_SHIFT |
+ ahb << AHB_DIV_SHIFT |
+ apb0 << APB0_DIV_SHIFT |
+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_ahb_apb0_cfg);
+ sdelay(20);
+}
+#endif
+
+void clock_set_pll3(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (clk == 0) {
+ clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN);
+ return;
+ }
+
+ /* PLL3 rate = 3000000 * m */
+ writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
+ CCM_PLL3_CTRL_M(clk / 3000000), &ccm->pll3_cfg);
+}
+
+unsigned int clock_get_pll3(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll3_cfg);
+ int m = ((rval & CCM_PLL3_CTRL_M_MASK) >> CCM_PLL3_CTRL_M_SHIFT);
+ return 3000000 * m;
+}
+
+unsigned int clock_get_pll5p(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll5_cfg);
+ int n = ((rval & CCM_PLL5_CTRL_N_MASK) >> CCM_PLL5_CTRL_N_SHIFT);
+ int k = ((rval & CCM_PLL5_CTRL_K_MASK) >> CCM_PLL5_CTRL_K_SHIFT) + 1;
+ int p = ((rval & CCM_PLL5_CTRL_P_MASK) >> CCM_PLL5_CTRL_P_SHIFT);
+ return (24000000 * n * k) >> p;
+}
+
+unsigned int clock_get_pll6(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll6_cfg);
+ int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
+ int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
+ return 24000000 * n * k / 2;
+}
+
+void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz)
+{
+ int pll = clock_get_pll5p();
+ int div = 1;
+
+ while ((pll / div) > hz)
+ div++;
+
+ writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_RST | CCM_DE_CTRL_PLL5P |
+ CCM_DE_CTRL_M(div), clk_cfg);
+}
--- /dev/null
+/*
+ * sun6i specific clock code
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_prcm_reg * const prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+ /* Set PLL ldo voltage without this PLL6 does not work properly */
+ clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
+ PRCM_PLL_CTRL_LDO_KEY);
+ clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
+ PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
+ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
+ clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
+
+ clock_set_pll1(408000000);
+
+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+ while (!(readl(&ccm->pll6_cfg) & CCM_PLL6_CTRL_LOCK))
+ ;
+
+ writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
+
+ writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg);
+ writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg);
+}
+#endif
+
+void clock_init_sec(void)
+{
+#ifdef CONFIG_MACH_SUN8I_H3
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ setbits_le32(&ccm->ccu_sec_switch,
+ CCM_SEC_SWITCH_MBUS_NONSEC |
+ CCM_SEC_SWITCH_BUS_NONSEC |
+ CCM_SEC_SWITCH_PLL_NONSEC);
+#endif
+}
+
+void clock_init_uart(void)
+{
+#if CONFIG_CONS_INDEX < 5
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* uart clock source is apb2 */
+ writel(APB2_CLK_SRC_OSC24M|
+ APB2_CLK_RATE_N_1|
+ APB2_CLK_RATE_M(1),
+ &ccm->apb2_div);
+
+ /* open the clock for uart */
+ setbits_le32(&ccm->apb2_gate,
+ CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+
+ /* deassert uart reset */
+ setbits_le32(&ccm->apb2_reset_cfg,
+ 1 << (APB2_RESET_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+#else
+ /* enable R_PIO and R_UART clocks, and de-assert resets */
+ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART);
+#endif
+}
+
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int p = 0;
+ int k = 1;
+ int m = 1;
+
+ if (clk > 1152000000) {
+ k = 2;
+ } else if (clk > 768000000) {
+ k = 3;
+ m = 2;
+ }
+
+ /* Switch to 24MHz clock while changing PLL1 */
+ writel(AXI_DIV_3 << AXI_DIV_SHIFT |
+ ATB_DIV_2 << ATB_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_axi_cfg);
+
+ /*
+ * sun6i: PLL1 rate = ((24000000 * n * k) >> 0) / m (p is ignored)
+ * sun8i: PLL1 rate = ((24000000 * n * k) >> p) / m
+ */
+ writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) |
+ CCM_PLL1_CTRL_N(clk / (24000000 * k / m)) |
+ CCM_PLL1_CTRL_K(k) | CCM_PLL1_CTRL_M(m), &ccm->pll1_cfg);
+ sdelay(200);
+
+ /* Switch CPU to PLL1 */
+ writel(AXI_DIV_3 << AXI_DIV_SHIFT |
+ ATB_DIV_2 << ATB_DIV_SHIFT |
+ CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT,
+ &ccm->cpu_axi_cfg);
+}
+#endif
+
+void clock_set_pll3(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int m = 8; /* 3 MHz steps just like sun4i, sun5i and sun7i */
+
+ if (clk == 0) {
+ clrbits_le32(&ccm->pll3_cfg, CCM_PLL3_CTRL_EN);
+ return;
+ }
+
+ /* PLL3 rate = 24000000 * n / m */
+ writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
+ CCM_PLL3_CTRL_N(clk / (24000000 / m)) | CCM_PLL3_CTRL_M(m),
+ &ccm->pll3_cfg);
+}
+
+void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int max_n = 32;
+ int k = 1, m = 2;
+
+ if (sigma_delta_enable)
+ writel(CCM_PLL5_PATTERN, &ccm->pll5_pattern_cfg);
+
+ /* PLL5 rate = 24000000 * n * k / m */
+ if (clk > 24000000 * k * max_n / m) {
+ m = 1;
+ if (clk > 24000000 * k * max_n / m)
+ k = 2;
+ }
+ writel(CCM_PLL5_CTRL_EN |
+ (sigma_delta_enable ? CCM_PLL5_CTRL_SIGMA_DELTA_EN : 0) |
+ CCM_PLL5_CTRL_UPD |
+ CCM_PLL5_CTRL_N(clk / (24000000 * k / m)) |
+ CCM_PLL5_CTRL_K(k) | CCM_PLL5_CTRL_M(m), &ccm->pll5_cfg);
+
+ udelay(5500);
+}
+
+#ifdef CONFIG_MACH_SUN6I
+void clock_set_mipi_pll(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ unsigned int k, m, n, value, diff;
+ unsigned best_k = 0, best_m = 0, best_n = 0, best_diff = 0xffffffff;
+ unsigned int src = clock_get_pll3();
+
+ /* All calculations are in KHz to avoid overflows */
+ clk /= 1000;
+ src /= 1000;
+
+ /* Pick the closest lower clock */
+ for (k = 1; k <= 4; k++) {
+ for (m = 1; m <= 16; m++) {
+ for (n = 1; n <= 16; n++) {
+ value = src * n * k / m;
+ if (value > clk)
+ continue;
+
+ diff = clk - value;
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_k = k;
+ best_m = m;
+ best_n = n;
+ }
+ if (diff == 0)
+ goto done;
+ }
+ }
+ }
+
+done:
+ writel(CCM_MIPI_PLL_CTRL_EN | CCM_MIPI_PLL_CTRL_LDO_EN |
+ CCM_MIPI_PLL_CTRL_N(best_n) | CCM_MIPI_PLL_CTRL_K(best_k) |
+ CCM_MIPI_PLL_CTRL_M(best_m), &ccm->mipi_pll_cfg);
+}
+#endif
+
+#ifdef CONFIG_MACH_SUN8I_A33
+void clock_set_pll11(unsigned int clk, bool sigma_delta_enable)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (sigma_delta_enable)
+ writel(CCM_PLL11_PATTERN, &ccm->pll5_pattern_cfg);
+
+ writel(CCM_PLL11_CTRL_EN | CCM_PLL11_CTRL_UPD |
+ (sigma_delta_enable ? CCM_PLL11_CTRL_SIGMA_DELTA_EN : 0) |
+ CCM_PLL11_CTRL_N(clk / 24000000), &ccm->pll11_cfg);
+
+ while (readl(&ccm->pll11_cfg) & CCM_PLL11_CTRL_UPD)
+ ;
+}
+#endif
+
+unsigned int clock_get_pll3(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll3_cfg);
+ int n = ((rval & CCM_PLL3_CTRL_N_MASK) >> CCM_PLL3_CTRL_N_SHIFT) + 1;
+ int m = ((rval & CCM_PLL3_CTRL_M_MASK) >> CCM_PLL3_CTRL_M_SHIFT) + 1;
+
+ /* Multiply by 1000 after dividing by m to avoid integer overflows */
+ return (24000 * n / m) * 1000;
+}
+
+unsigned int clock_get_pll6(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll6_cfg);
+ int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
+ int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
+ return 24000000 * n * k / 2;
+}
+
+unsigned int clock_get_mipi_pll(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->mipi_pll_cfg);
+ unsigned int n = ((rval & CCM_MIPI_PLL_CTRL_N_MASK) >> CCM_MIPI_PLL_CTRL_N_SHIFT) + 1;
+ unsigned int k = ((rval & CCM_MIPI_PLL_CTRL_K_MASK) >> CCM_MIPI_PLL_CTRL_K_SHIFT) + 1;
+ unsigned int m = ((rval & CCM_MIPI_PLL_CTRL_M_MASK) >> CCM_MIPI_PLL_CTRL_M_SHIFT) + 1;
+ unsigned int src = clock_get_pll3();
+
+ /* Multiply by 1000 after dividing by m to avoid integer overflows */
+ return ((src / 1000) * n * k / m) * 1000;
+}
+
+void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz)
+{
+ int pll = clock_get_pll6() * 2;
+ int div = 1;
+
+ while ((pll / div) > hz)
+ div++;
+
+ writel(CCM_DE_CTRL_GATE | CCM_DE_CTRL_PLL6_2X | CCM_DE_CTRL_M(div),
+ clk_cfg);
+}
--- /dev/null
+/*
+ * A83 specific clock code
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+#ifdef CONFIG_SPL_BUILD
+void clock_init_safe(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ clock_set_pll1(408000000);
+ /* enable pll_hsic, default is 480M */
+ writel(PLL8_CFG_DEFAULT, &ccm->pll8_cfg);
+ writel(readl(&ccm->pll8_cfg) | (0x1 << 31), &ccm->pll8_cfg);
+ while (!(readl(&ccm->pll_stable_status) & (1 << 8))) {}
+
+ /* switch to default 24MHz before changing to hsic */
+ writel(0x0, &ccm->cci400_cfg);
+ sdelay(50);
+ writel(CCM_CCI400_CLK_SEL_HSIC, &ccm->cci400_cfg);
+ sdelay(100);
+
+ /* switch before changing pll6 */
+ clrsetbits_le32(&ccm->ahb1_apb1_div, AHB1_CLK_SRC_MASK,
+ AHB1_CLK_SRC_OSC24M);
+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+ while (!(readl(&ccm->pll_stable_status) & (1 << 6))) {}
+
+ writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
+ writel(CCM_MBUS_RESET_RESET, &ccm->mbus_reset);
+ writel(MBUS_CLK_DEFAULT, &ccm->mbus_clk_cfg);
+
+ /* timestamp */
+ writel(1, 0x01720000);
+}
+#endif
+
+void clock_init_uart(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* uart clock source is apb2 */
+ writel(APB2_CLK_SRC_OSC24M|
+ APB2_CLK_RATE_N_1|
+ APB2_CLK_RATE_M(1),
+ &ccm->apb2_div);
+
+ /* open the clock for uart */
+ setbits_le32(&ccm->apb2_gate,
+ CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+
+ /* deassert uart reset */
+ setbits_le32(&ccm->apb2_reset_cfg,
+ 1 << (APB2_RESET_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+}
+
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int p = 0;
+
+ /* Switch to 24MHz clock while changing PLL1 */
+ writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
+ AXI_DIV_2 << AXI1_DIV_SHIFT |
+ CPU_CLK_SRC_OSC24M << C0_CPUX_CLK_SRC_SHIFT |
+ CPU_CLK_SRC_OSC24M << C1_CPUX_CLK_SRC_SHIFT,
+ &ccm->cpu_axi_cfg);
+
+ /* clk = 24*n/p, p is ignored if clock is >288MHz */
+ writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
+ CCM_PLL1_CTRL_N(clk / 24000000),
+ &ccm->pll1_c0_cfg);
+ while (!(readl(&ccm->pll_stable_status) & 0x01)) {}
+
+ writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CMM_PLL1_CLOCK_TIME_2 |
+ CCM_PLL1_CTRL_N(clk / (24000000)),
+ &ccm->pll1_c1_cfg);
+ while (!(readl(&ccm->pll_stable_status) & 0x02)) {}
+
+ /* Switch CPU to PLL1 */
+ writel(AXI_DIV_2 << AXI0_DIV_SHIFT |
+ AXI_DIV_2 << AXI1_DIV_SHIFT |
+ CPU_CLK_SRC_PLL1 << C0_CPUX_CLK_SRC_SHIFT |
+ CPU_CLK_SRC_PLL1 << C1_CPUX_CLK_SRC_SHIFT,
+ &ccm->cpu_axi_cfg);
+}
+#endif
+
+void clock_set_pll5(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ unsigned int div1 = 0, div2 = 0;
+
+ /* A83T PLL5 DDR rate = 24000000 * (n+1)/(div1+1)/(div2+1) */
+ writel(CCM_PLL5_CTRL_EN | CCM_PLL5_CTRL_UPD |
+ CCM_PLL5_CTRL_N(clk / (24000000)) |
+ div2 << CCM_PLL5_DIV2_SHIFT |
+ div1 << CCM_PLL5_DIV1_SHIFT, &ccm->pll5_cfg);
+
+ udelay(5500);
+}
+
+
+unsigned int clock_get_pll6(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ uint32_t rval = readl(&ccm->pll6_cfg);
+ int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
+ int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
+ CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
+ int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
+ CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
+ return 24000000 * n / div1 / div2;
+}
--- /dev/null
+/*
+ * sun9i specific clock code
+ *
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+void clock_init_uart(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* open the clock for uart */
+ setbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+ /* deassert uart reset */
+ setbits_le32(&ccm->apb1_reset_cfg,
+ 1 << (APB1_RESET_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+
+ /* Dup with clock_init_safe(), drop once sun9i SPL support lands */
+ writel(PLL4_CFG_DEFAULT, &ccm->pll4_periph0_cfg);
+}
+
+int clock_twi_onoff(int port, int state)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (port > 4)
+ return -1;
+
+ /* set the apb reset and clock gate for twi */
+ if (state) {
+ setbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
+ setbits_le32(&ccm->apb1_reset_cfg,
+ 1 << (APB1_RESET_TWI_SHIFT + port));
+ } else {
+ clrbits_le32(&ccm->apb1_reset_cfg,
+ 1 << (APB1_RESET_TWI_SHIFT + port));
+ clrbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
+ }
+
+ return 0;
+}
+
+unsigned int clock_get_pll4_periph0(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll4_periph0_cfg);
+ int n = ((rval & CCM_PLL4_CTRL_N_MASK) >> CCM_PLL4_CTRL_N_SHIFT);
+ int p = ((rval & CCM_PLL4_CTRL_P_MASK) >> CCM_PLL4_CTRL_P_SHIFT);
+ int m = ((rval & CCM_PLL4_CTRL_M_MASK) >> CCM_PLL4_CTRL_M_SHIFT) + 1;
+ const int k = 1;
+
+ return ((24000000 * n * k) >> p) / m;
+}
--- /dev/null
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <axp_pmic.h>
+#include <errno.h>
+
+#ifdef CONFIG_MACH_SUN6I
+int sunxi_get_ss_bonding_id(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ static int bonding_id = -1;
+
+ if (bonding_id != -1)
+ return bonding_id;
+
+ /* Enable Security System */
+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_SS);
+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_SS);
+
+ bonding_id = readl(SUNXI_SS_BASE);
+ bonding_id = (bonding_id >> 16) & 0x7;
+
+ /* Disable Security System again */
+ clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_SS);
+ clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_SS);
+
+ return bonding_id;
+}
+#endif
+
+#ifdef CONFIG_MACH_SUN8I
+uint sunxi_get_sram_id(void)
+{
+ uint id;
+
+ /* Unlock sram info reg, read it, relock */
+ setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
+ id = readl(SUNXI_SRAMC_BASE + 0x24) >> 16;
+ clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
+
+ return id;
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+#ifdef CONFIG_MACH_SUN4I
+ puts("CPU: Allwinner A10 (SUN4I)\n");
+#elif defined CONFIG_MACH_SUN5I
+ u32 val = readl(SUNXI_SID_BASE + 0x08);
+ switch ((val >> 12) & 0xf) {
+ case 0: puts("CPU: Allwinner A12 (SUN5I)\n"); break;
+ case 3: puts("CPU: Allwinner A13 (SUN5I)\n"); break;
+ case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break;
+ default: puts("CPU: Allwinner A1X (SUN5I)\n");
+ }
+#elif defined CONFIG_MACH_SUN6I
+ switch (sunxi_get_ss_bonding_id()) {
+ case SUNXI_SS_BOND_ID_A31:
+ puts("CPU: Allwinner A31 (SUN6I)\n");
+ break;
+ case SUNXI_SS_BOND_ID_A31S:
+ puts("CPU: Allwinner A31s (SUN6I)\n");
+ break;
+ default:
+ printf("CPU: Allwinner A31? (SUN6I, id: %d)\n",
+ sunxi_get_ss_bonding_id());
+ }
+#elif defined CONFIG_MACH_SUN7I
+ puts("CPU: Allwinner A20 (SUN7I)\n");
+#elif defined CONFIG_MACH_SUN8I_A23
+ printf("CPU: Allwinner A23 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_A33
+ printf("CPU: Allwinner A33 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_A83T
+ printf("CPU: Allwinner A83T (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_H3
+ printf("CPU: Allwinner H3 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN9I
+ puts("CPU: Allwinner A80 (SUN9I)\n");
+#elif defined CONFIG_MACH_SUN50I
+ puts("CPU: Allwinner A64 (SUN50I)\n");
+#else
+#warning Please update cpu_info.c with correct CPU information
+ puts("CPU: SUNXI Family\n");
+#endif
+ return 0;
+}
+#endif
+
+int sunxi_get_sid(unsigned int *sid)
+{
+#ifdef CONFIG_AXP221_POWER
+ return axp_get_sid(sid);
+#elif defined SUNXI_SID_BASE
+ int i;
+
+ for (i = 0; i< 4; i++)
+ sid[i] = readl((ulong)SUNXI_SID_BASE + 4 * i);
+
+ return 0;
+#else
+ return -ENODEV;
+#endif
+}
--- /dev/null
+/*
+ * DRAM init helper functions
+ *
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/dram.h>
+
+/*
+ * Wait up to 1s for value to be set in given part of reg.
+ */
+void mctl_await_completion(u32 *reg, u32 mask, u32 val)
+{
+ unsigned long tmo = timer_get_us() + 1000000;
+
+ while ((readl(reg) & mask) != val) {
+ if (timer_get_us() > tmo)
+ panic("Timeout initialising DRAM\n");
+ }
+}
+
+/*
+ * Test if memory at offset offset matches memory at begin of DRAM
+ */
+bool mctl_mem_matches(u32 offset)
+{
+ /* Try to write different values to RAM at two addresses */
+ writel(0, CONFIG_SYS_SDRAM_BASE);
+ writel(0xaa55aa55, (ulong)CONFIG_SYS_SDRAM_BASE + offset);
+ /* Check if the same value is actually observed when reading back */
+ return readl(CONFIG_SYS_SDRAM_BASE) ==
+ readl((ulong)CONFIG_SYS_SDRAM_BASE + offset);
+}
--- /dev/null
+/*
+ * sunxi DRAM controller initialization
+ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * Based on sun4i Linux kernel sources mach-sunxi/pm/standby/dram*.c
+ * and earlier U-Boot Allwiner A10 SPL work
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Unfortunately the only documentation we have on the sun7i DRAM
+ * controller is Allwinner boot0 + boot1 code, and that code uses
+ * magic numbers & shifts with no explanations. Hence this code is
+ * rather undocumented and full of magic.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/sys_proto.h>
+
+#define CPU_CFG_CHIP_VER(n) ((n) << 6)
+#define CPU_CFG_CHIP_VER_MASK CPU_CFG_CHIP_VER(0x3)
+#define CPU_CFG_CHIP_REV_A 0x0
+#define CPU_CFG_CHIP_REV_C1 0x1
+#define CPU_CFG_CHIP_REV_C2 0x2
+#define CPU_CFG_CHIP_REV_B 0x3
+
+/*
+ * Wait up to 1s for mask to be clear in given reg.
+ */
+static inline void await_bits_clear(u32 *reg, u32 mask)
+{
+ mctl_await_completion(reg, mask, 0);
+}
+
+/*
+ * Wait up to 1s for mask to be set in given reg.
+ */
+static inline void await_bits_set(u32 *reg, u32 mask)
+{
+ mctl_await_completion(reg, mask, mask);
+}
+
+/*
+ * This performs the external DRAM reset by driving the RESET pin low and
+ * then high again. According to the DDR3 spec, the RESET pin needs to be
+ * kept low for at least 200 us.
+ */
+static void mctl_ddr3_reset(void)
+{
+ struct sunxi_dram_reg *dram =
+ (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+#ifdef CONFIG_MACH_SUN4I
+ struct sunxi_timer_reg *timer =
+ (struct sunxi_timer_reg *)SUNXI_TIMER_BASE;
+ u32 reg_val;
+
+ writel(0, &timer->cpu_cfg);
+ reg_val = readl(&timer->cpu_cfg);
+
+ if ((reg_val & CPU_CFG_CHIP_VER_MASK) !=
+ CPU_CFG_CHIP_VER(CPU_CFG_CHIP_REV_A)) {
+ setbits_le32(&dram->mcr, DRAM_MCR_RESET);
+ udelay(200);
+ clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
+ } else
+#endif
+ {
+ clrbits_le32(&dram->mcr, DRAM_MCR_RESET);
+ udelay(200);
+ setbits_le32(&dram->mcr, DRAM_MCR_RESET);
+ }
+ /* After the RESET pin is de-asserted, the DDR3 spec requires to wait
+ * for additional 500 us before driving the CKE pin (Clock Enable)
+ * high. The duration of this delay can be configured in the SDR_IDCR
+ * (Initialization Delay Configuration Register) and applied
+ * automatically by the DRAM controller during the DDR3 initialization
+ * step. But SDR_IDCR has limited range on sun4i/sun5i hardware and
+ * can't provide sufficient delay at DRAM clock frequencies higher than
+ * 524 MHz (while Allwinner A13 supports DRAM clock frequency up to
+ * 533 MHz according to the datasheet). Additionally, there is no
+ * official documentation for the SDR_IDCR register anywhere, and
+ * there is always a chance that we are interpreting it wrong.
+ * Better be safe than sorry, so add an explicit delay here. */
+ udelay(500);
+}
+
+static void mctl_set_drive(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+#ifdef CONFIG_MACH_SUN7I
+ clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28),
+#else
+ clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3),
+#endif
+ DRAM_MCR_MODE_EN(0x3) |
+ 0xffc);
+}
+
+static void mctl_itm_disable(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrsetbits_le32(&dram->ccr, DRAM_CCR_INIT, DRAM_CCR_ITM_OFF);
+}
+
+static void mctl_itm_enable(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrbits_le32(&dram->ccr, DRAM_CCR_ITM_OFF);
+}
+
+static void mctl_itm_reset(void)
+{
+ mctl_itm_disable();
+ udelay(1); /* ITM reset needs a bit of delay */
+ mctl_itm_enable();
+ udelay(1);
+}
+
+static void mctl_enable_dll0(u32 phase)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ clrsetbits_le32(&dram->dllcr[0], 0x3f << 6,
+ ((phase >> 16) & 0x3f) << 6);
+ clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET, DRAM_DLLCR_DISABLE);
+ udelay(2);
+
+ clrbits_le32(&dram->dllcr[0], DRAM_DLLCR_NRESET | DRAM_DLLCR_DISABLE);
+ udelay(22);
+
+ clrsetbits_le32(&dram->dllcr[0], DRAM_DLLCR_DISABLE, DRAM_DLLCR_NRESET);
+ udelay(22);
+}
+
+/* Get the number of DDR byte lanes */
+static u32 mctl_get_number_of_lanes(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ if ((readl(&dram->dcr) & DRAM_DCR_BUS_WIDTH_MASK) ==
+ DRAM_DCR_BUS_WIDTH(DRAM_DCR_BUS_WIDTH_32BIT))
+ return 4;
+ else
+ return 2;
+}
+
+/*
+ * Note: This differs from pm/standby in that it checks the bus width
+ */
+static void mctl_enable_dllx(u32 phase)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 i, number_of_lanes;
+
+ number_of_lanes = mctl_get_number_of_lanes();
+
+ for (i = 1; i <= number_of_lanes; i++) {
+ clrsetbits_le32(&dram->dllcr[i], 0xf << 14,
+ (phase & 0xf) << 14);
+ clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET,
+ DRAM_DLLCR_DISABLE);
+ phase >>= 4;
+ }
+ udelay(2);
+
+ for (i = 1; i <= number_of_lanes; i++)
+ clrbits_le32(&dram->dllcr[i], DRAM_DLLCR_NRESET |
+ DRAM_DLLCR_DISABLE);
+ udelay(22);
+
+ for (i = 1; i <= number_of_lanes; i++)
+ clrsetbits_le32(&dram->dllcr[i], DRAM_DLLCR_DISABLE,
+ DRAM_DLLCR_NRESET);
+ udelay(22);
+}
+
+static u32 hpcr_value[32] = {
+#ifdef CONFIG_MACH_SUN5I
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0x1031, 0x1031, 0x0735, 0x1035,
+ 0x1035, 0x0731, 0x1031, 0,
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0x0301, 0x0301, 0x0301, 0
+#endif
+#ifdef CONFIG_MACH_SUN4I
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0x0301, 0x0301, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0x1031, 0x1031, 0x0735, 0x5031,
+ 0x1035, 0x0731, 0x1031, 0x0735,
+ 0x1035, 0x1031, 0x0731, 0x1035,
+ 0x1031, 0x0301, 0x0301, 0x0731
+#endif
+#ifdef CONFIG_MACH_SUN7I
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0x0301, 0x0301, 0x0301, 0x0301,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0x1031, 0x1031, 0x0735, 0x1035,
+ 0x1035, 0x0731, 0x1031, 0x0735,
+ 0x1035, 0x1031, 0x0731, 0x1035,
+ 0x0001, 0x1031, 0, 0x1031
+ /* last row differs from boot0 source table
+ * 0x1031, 0x0301, 0x0301, 0x0731
+ * but boot0 code skips #28 and #30, and sets #29 and #31 to the
+ * value from #28 entry (0x1031)
+ */
+#endif
+};
+
+static void mctl_configure_hostport(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 i;
+
+ for (i = 0; i < 32; i++)
+ writel(hpcr_value[i], &dram->hpcr[i]);
+}
+
+static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk)
+{
+ u32 reg_val;
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ u32 pll5p_clk, pll6x_clk;
+ u32 pll5p_div, pll6x_div;
+ u32 pll5p_rate, pll6x_rate;
+
+ /* setup DRAM PLL */
+ reg_val = readl(&ccm->pll5_cfg);
+ reg_val &= ~CCM_PLL5_CTRL_M_MASK; /* set M to 0 (x1) */
+ reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */
+ reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */
+ reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */
+#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
+ /* Old kernels are hardcoded to P=1 (divide by 2) */
+ reg_val |= CCM_PLL5_CTRL_P(1);
+#endif
+ if (clk >= 540 && clk < 552) {
+ /* dram = 540MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
+ } else if (clk >= 512 && clk < 528) {
+ /* dram = 512MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
+ } else if (clk >= 496 && clk < 504) {
+ /* dram = 496MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
+ } else if (clk >= 468 && clk < 480) {
+ /* dram = 468MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
+ } else if (clk >= 396 && clk < 408) {
+ /* dram = 396MHz */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
+ } else {
+ /* any other frequency that is a multiple of 24 */
+ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
+ reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
+ reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(clk / 24));
+ }
+ reg_val &= ~CCM_PLL5_CTRL_VCO_GAIN; /* PLL VCO Gain off */
+ reg_val |= CCM_PLL5_CTRL_EN; /* PLL On */
+ writel(reg_val, &ccm->pll5_cfg);
+ udelay(5500);
+
+ setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK);
+
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+ /* reset GPS */
+ clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE);
+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
+ udelay(1);
+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS);
+#endif
+
+ /* setup MBUS clock */
+ if (!mbus_clk)
+ mbus_clk = 300;
+
+ /* PLL5P and PLL6 are the potential clock sources for MBUS */
+ pll6x_clk = clock_get_pll6() / 1000000;
+#ifdef CONFIG_MACH_SUN7I
+ pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */
+#endif
+ pll5p_clk = clock_get_pll5p() / 1000000;
+ pll6x_div = DIV_ROUND_UP(pll6x_clk, mbus_clk);
+ pll5p_div = DIV_ROUND_UP(pll5p_clk, mbus_clk);
+ pll6x_rate = pll6x_clk / pll6x_div;
+ pll5p_rate = pll5p_clk / pll5p_div;
+
+ if (pll6x_div <= 16 && pll6x_rate > pll5p_rate) {
+ /* use PLL6 as the MBUS clock source */
+ reg_val = CCM_MBUS_CTRL_GATE |
+ CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
+ CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
+ CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(pll6x_div));
+ } else if (pll5p_div <= 16) {
+ /* use PLL5P as the MBUS clock source */
+ reg_val = CCM_MBUS_CTRL_GATE |
+ CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) |
+ CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
+ CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(pll5p_div));
+ } else {
+ panic("Bad mbus_clk\n");
+ }
+ writel(reg_val, &ccm->mbus_clk_cfg);
+
+ /*
+ * open DRAMC AHB & DLL register clock
+ * close it first
+ */
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
+#else
+ clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
+#endif
+ udelay(22);
+
+ /* then open it */
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL);
+#else
+ setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM);
+#endif
+ udelay(22);
+}
+
+/*
+ * The data from rslrX and rdgrX registers (X=rank) is stored
+ * in a single 32-bit value using the following format:
+ * bits [31:26] - DQS gating system latency for byte lane 3
+ * bits [25:24] - DQS gating phase select for byte lane 3
+ * bits [23:18] - DQS gating system latency for byte lane 2
+ * bits [17:16] - DQS gating phase select for byte lane 2
+ * bits [15:10] - DQS gating system latency for byte lane 1
+ * bits [ 9:8 ] - DQS gating phase select for byte lane 1
+ * bits [ 7:2 ] - DQS gating system latency for byte lane 0
+ * bits [ 1:0 ] - DQS gating phase select for byte lane 0
+ */
+static void mctl_set_dqs_gating_delay(int rank, u32 dqs_gating_delay)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 lane, number_of_lanes = mctl_get_number_of_lanes();
+ /* rank0 gating system latency (3 bits per lane: cycles) */
+ u32 slr = readl(rank == 0 ? &dram->rslr0 : &dram->rslr1);
+ /* rank0 gating phase select (2 bits per lane: 90, 180, 270, 360) */
+ u32 dgr = readl(rank == 0 ? &dram->rdgr0 : &dram->rdgr1);
+ for (lane = 0; lane < number_of_lanes; lane++) {
+ u32 tmp = dqs_gating_delay >> (lane * 8);
+ slr &= ~(7 << (lane * 3));
+ slr |= ((tmp >> 2) & 7) << (lane * 3);
+ dgr &= ~(3 << (lane * 2));
+ dgr |= (tmp & 3) << (lane * 2);
+ }
+ writel(slr, rank == 0 ? &dram->rslr0 : &dram->rslr1);
+ writel(dgr, rank == 0 ? &dram->rdgr0 : &dram->rdgr1);
+}
+
+static int dramc_scan_readpipe(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 reg_val;
+
+ /* data training trigger */
+ clrbits_le32(&dram->csr, DRAM_CSR_FAILED);
+ setbits_le32(&dram->ccr, DRAM_CCR_DATA_TRAINING);
+
+ /* check whether data training process has completed */
+ await_bits_clear(&dram->ccr, DRAM_CCR_DATA_TRAINING);
+
+ /* check data training result */
+ reg_val = readl(&dram->csr);
+ if (reg_val & DRAM_CSR_FAILED)
+ return -1;
+
+ return 0;
+}
+
+static void dramc_clock_output_en(u32 on)
+{
+#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ if (on)
+ setbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
+ else
+ clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT);
+#endif
+#ifdef CONFIG_MACH_SUN4I
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ if (on)
+ setbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT);
+ else
+ clrbits_le32(&ccm->dram_clk_gate, CCM_DRAM_CTRL_DCLK_OUT);
+#endif
+}
+
+/* tRFC in nanoseconds for different densities (from the DDR3 spec) */
+static const u16 tRFC_DDR3_table[6] = {
+ /* 256Mb 512Mb 1Gb 2Gb 4Gb 8Gb */
+ 90, 90, 110, 160, 300, 350
+};
+
+static void dramc_set_autorefresh_cycle(u32 clk, u32 density)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 tRFC, tREFI;
+
+ tRFC = (tRFC_DDR3_table[density] * clk + 999) / 1000;
+ tREFI = (7987 * clk) >> 10; /* <= 7.8us */
+
+ writel(DRAM_DRR_TREFI(tREFI) | DRAM_DRR_TRFC(tRFC), &dram->drr);
+}
+
+/* Calculate the value for A11, A10, A9 bits in MR0 (write recovery) */
+static u32 ddr3_write_recovery(u32 clk)
+{
+ u32 twr_ns = 15; /* DDR3 spec says that it is 15ns for all speed bins */
+ u32 twr_ck = (twr_ns * clk + 999) / 1000;
+ if (twr_ck < 5)
+ return 1;
+ else if (twr_ck <= 8)
+ return twr_ck - 4;
+ else if (twr_ck <= 10)
+ return 5;
+ else
+ return 6;
+}
+
+/*
+ * If the dram->ppwrsctl (SDR_DPCR) register has the lowest bit set to 1, this
+ * means that DRAM is currently in self-refresh mode and retaining the old
+ * data. Since we have no idea what to do in this situation yet, just set this
+ * register to 0 and initialize DRAM in the same way as on any normal reboot
+ * (discarding whatever was stored there).
+ *
+ * Note: on sun7i hardware, the highest 16 bits need to be set to 0x1651 magic
+ * value for this write operation to have any effect. On sun5i hadware this
+ * magic value is not necessary. And on sun4i hardware the writes to this
+ * register seem to have no effect at all.
+ */
+static void mctl_disable_power_save(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ writel(0x16510000, &dram->ppwrsctl);
+}
+
+/*
+ * After the DRAM is powered up or reset, the DDR3 spec requires to wait at
+ * least 500 us before driving the CKE pin (Clock Enable) high. The dram->idct
+ * (SDR_IDCR) register appears to configure this delay, which gets applied
+ * right at the time when the DRAM initialization is activated in the
+ * 'mctl_ddr3_initialize' function.
+ */
+static void mctl_set_cke_delay(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+
+ /* The CKE delay is represented in DRAM clock cycles, multiplied by N
+ * (where N=2 for sun4i/sun5i and N=3 for sun7i). Here it is set to
+ * the maximum possible value 0x1ffff, just like in the Allwinner's
+ * boot0 bootloader. The resulting delay value is somewhere between
+ * ~0.4 ms (sun5i with 648 MHz DRAM clock speed) and ~1.1 ms (sun7i
+ * with 360 MHz DRAM clock speed). */
+ setbits_le32(&dram->idcr, 0x1ffff);
+}
+
+/*
+ * This triggers the DRAM initialization. It performs sending the mode registers
+ * to the DRAM among other things. Very likely the ZQCL command is also getting
+ * executed (to do the initial impedance calibration on the DRAM side of the
+ * wire). The memory controller and the PHY must be already configured before
+ * calling this function.
+ */
+static void mctl_ddr3_initialize(void)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ setbits_le32(&dram->ccr, DRAM_CCR_INIT);
+ await_bits_clear(&dram->ccr, DRAM_CCR_INIT);
+}
+
+/*
+ * Perform impedance calibration on the DRAM controller side of the wire.
+ */
+static void mctl_set_impedance(u32 zq, bool odt_en)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 reg_val;
+ u32 zprog = zq & 0xFF, zdata = (zq >> 8) & 0xFFFFF;
+
+#ifndef CONFIG_MACH_SUN7I
+ /* Appears that some kind of automatically initiated default
+ * ZQ calibration is already in progress at this point on sun4i/sun5i
+ * hardware, but not on sun7i. So it is reasonable to wait for its
+ * completion before doing anything else. */
+ await_bits_set(&dram->zqsr, DRAM_ZQSR_ZDONE);
+#endif
+
+ /* ZQ calibration is not really useful unless ODT is enabled */
+ if (!odt_en)
+ return;
+
+#ifdef CONFIG_MACH_SUN7I
+ /* Enabling ODT in SDR_IOCR on sun7i hardware results in a deadlock
+ * unless bit 24 is set in SDR_ZQCR1. Not much is known about the
+ * SDR_ZQCR1 register, but there are hints indicating that it might
+ * be related to periodic impedance re-calibration. This particular
+ * magic value is borrowed from the Allwinner boot0 bootloader, and
+ * using it helps to avoid troubles */
+ writel((1 << 24) | (1 << 1), &dram->zqcr1);
+#endif
+
+ /* Needed at least for sun5i, because it does not self clear there */
+ clrbits_le32(&dram->zqcr0, DRAM_ZQCR0_ZCAL);
+
+ if (zdata) {
+ /* Set the user supplied impedance data */
+ reg_val = DRAM_ZQCR0_ZDEN | zdata;
+ writel(reg_val, &dram->zqcr0);
+ /* no need to wait, this takes effect immediately */
+ } else {
+ /* Do the calibration using the external resistor */
+ reg_val = DRAM_ZQCR0_ZCAL | DRAM_ZQCR0_IMP_DIV(zprog);
+ writel(reg_val, &dram->zqcr0);
+ /* Wait for the new impedance configuration to settle */
+ await_bits_set(&dram->zqsr, DRAM_ZQSR_ZDONE);
+ }
+
+ /* Needed at least for sun5i, because it does not self clear there */
+ clrbits_le32(&dram->zqcr0, DRAM_ZQCR0_ZCAL);
+
+ /* Set I/O configure register */
+ writel(DRAM_IOCR_ODT_EN, &dram->iocr);
+}
+
+static unsigned long dramc_init_helper(struct dram_para *para)
+{
+ struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE;
+ u32 reg_val;
+ u32 density;
+ int ret_val;
+
+ /*
+ * only single rank DDR3 is supported by this code even though the
+ * hardware can theoretically support DDR2 and up to two ranks
+ */
+ if (para->type != DRAM_MEMORY_TYPE_DDR3 || para->rank_num != 1)
+ return 0;
+
+ /* setup DRAM relative clock */
+ mctl_setup_dram_clock(para->clock, para->mbus_clock);
+
+ /* Disable any pad power save control */
+ mctl_disable_power_save();
+
+ mctl_set_drive();
+
+ /* dram clock off */
+ dramc_clock_output_en(0);
+
+#ifdef CONFIG_MACH_SUN4I
+ /* select dram controller 1 */
+ writel(DRAM_CSEL_MAGIC, &dram->csel);
+#endif
+
+ mctl_itm_disable();
+ mctl_enable_dll0(para->tpr3);
+
+ /* configure external DRAM */
+ reg_val = DRAM_DCR_TYPE_DDR3;
+ reg_val |= DRAM_DCR_IO_WIDTH(para->io_width >> 3);
+
+ if (para->density == 256)
+ density = DRAM_DCR_CHIP_DENSITY_256M;
+ else if (para->density == 512)
+ density = DRAM_DCR_CHIP_DENSITY_512M;
+ else if (para->density == 1024)
+ density = DRAM_DCR_CHIP_DENSITY_1024M;
+ else if (para->density == 2048)
+ density = DRAM_DCR_CHIP_DENSITY_2048M;
+ else if (para->density == 4096)
+ density = DRAM_DCR_CHIP_DENSITY_4096M;
+ else if (para->density == 8192)
+ density = DRAM_DCR_CHIP_DENSITY_8192M;
+ else
+ density = DRAM_DCR_CHIP_DENSITY_256M;
+
+ reg_val |= DRAM_DCR_CHIP_DENSITY(density);
+ reg_val |= DRAM_DCR_BUS_WIDTH((para->bus_width >> 3) - 1);
+ reg_val |= DRAM_DCR_RANK_SEL(para->rank_num - 1);
+ reg_val |= DRAM_DCR_CMD_RANK_ALL;
+ reg_val |= DRAM_DCR_MODE(DRAM_DCR_MODE_INTERLEAVE);
+ writel(reg_val, &dram->dcr);
+
+ dramc_clock_output_en(1);
+
+ mctl_set_impedance(para->zq, para->odt_en);
+
+ mctl_set_cke_delay();
+
+ mctl_ddr3_reset();
+
+ udelay(1);
+
+ await_bits_clear(&dram->ccr, DRAM_CCR_INIT);
+
+ mctl_enable_dllx(para->tpr3);
+
+ /* set refresh period */
+ dramc_set_autorefresh_cycle(para->clock, density);
+
+ /* set timing parameters */
+ writel(para->tpr0, &dram->tpr0);
+ writel(para->tpr1, &dram->tpr1);
+ writel(para->tpr2, &dram->tpr2);
+
+ reg_val = DRAM_MR_BURST_LENGTH(0x0);
+#if (defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I))
+ reg_val |= DRAM_MR_POWER_DOWN;
+#endif
+ reg_val |= DRAM_MR_CAS_LAT(para->cas - 4);
+ reg_val |= DRAM_MR_WRITE_RECOVERY(ddr3_write_recovery(para->clock));
+ writel(reg_val, &dram->mr);
+
+ writel(para->emr1, &dram->emr);
+ writel(para->emr2, &dram->emr2);
+ writel(para->emr3, &dram->emr3);
+
+ /* disable drift compensation and set passive DQS window mode */
+ clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE);
+
+#ifdef CONFIG_MACH_SUN7I
+ /* Command rate timing mode 2T & 1T */
+ if (para->tpr4 & 0x1)
+ setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T);
+#endif
+ /* initialize external DRAM */
+ mctl_ddr3_initialize();
+
+ /* scan read pipe value */
+ mctl_itm_enable();
+
+ /* Hardware DQS gate training */
+ ret_val = dramc_scan_readpipe();
+
+ if (ret_val < 0)
+ return 0;
+
+ /* allow to override the DQS training results with a custom delay */
+ if (para->dqs_gating_delay)
+ mctl_set_dqs_gating_delay(0, para->dqs_gating_delay);
+
+ /* set the DQS gating window type */
+ if (para->active_windowing)
+ clrbits_le32(&dram->ccr, DRAM_CCR_DQS_GATE);
+ else
+ setbits_le32(&dram->ccr, DRAM_CCR_DQS_GATE);
+
+ mctl_itm_reset();
+
+ /* configure all host port */
+ mctl_configure_hostport();
+
+ return get_ram_size((long *)PHYS_SDRAM_0, PHYS_SDRAM_0_SIZE);
+}
+
+unsigned long dramc_init(struct dram_para *para)
+{
+ unsigned long dram_size, actual_density;
+
+ /* If the dram configuration is not provided, use a default */
+ if (!para)
+ return 0;
+
+ /* if everything is known, then autodetection is not necessary */
+ if (para->io_width && para->bus_width && para->density)
+ return dramc_init_helper(para);
+
+ /* try to autodetect the DRAM bus width and density */
+ para->io_width = 16;
+ para->bus_width = 32;
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I)
+ /* only A0-A14 address lines on A10/A13, limiting max density to 4096 */
+ para->density = 4096;
+#else
+ /* all A0-A15 address lines on A20, which allow density 8192 */
+ para->density = 8192;
+#endif
+
+ dram_size = dramc_init_helper(para);
+ if (!dram_size) {
+ /* if 32-bit bus width failed, try 16-bit bus width instead */
+ para->bus_width = 16;
+ dram_size = dramc_init_helper(para);
+ if (!dram_size) {
+ /* if 16-bit bus width also failed, then bail out */
+ return dram_size;
+ }
+ }
+
+ /* check if we need to adjust the density */
+ actual_density = (dram_size >> 17) * para->io_width / para->bus_width;
+
+ if (actual_density != para->density) {
+ /* update the density and re-initialize DRAM again */
+ para->density = actual_density;
+ dram_size = dramc_init_helper(para);
+ }
+
+ return dram_size;
+}
--- /dev/null
+/*
+ * Sun6i platform dram controller init.
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+
+#define DRAM_CLK (CONFIG_DRAM_CLK * 1000000)
+
+struct dram_sun6i_para {
+ u8 bus_width;
+ u8 chan;
+ u8 rank;
+ u8 rows;
+ u16 page_size;
+};
+
+static void mctl_sys_init(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int dram_clk_div = 2;
+
+ clock_set_pll5(DRAM_CLK * dram_clk_div, false);
+
+ clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV0_MASK,
+ CCM_DRAMCLK_CFG_DIV0(dram_clk_div) | CCM_DRAMCLK_CFG_RST |
+ CCM_DRAMCLK_CFG_UPD);
+ mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+ writel(MDFS_CLK_DEFAULT, &ccm->mdfs_clk_cfg);
+
+ /* deassert mctl reset */
+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+
+ /* enable mctl clock */
+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+}
+
+static void mctl_dll_init(int ch_index, struct dram_sun6i_para *para)
+{
+ struct sunxi_mctl_phy_reg *mctl_phy;
+
+ if (ch_index == 0)
+ mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+ else
+ mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
+
+ /* disable + reset dlls */
+ writel(MCTL_DLLCR_DISABLE, &mctl_phy->acdllcr);
+ writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx0dllcr);
+ writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx1dllcr);
+ if (para->bus_width == 32) {
+ writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx2dllcr);
+ writel(MCTL_DLLCR_DISABLE, &mctl_phy->dx3dllcr);
+ }
+ udelay(2);
+
+ /* enable + reset dlls */
+ writel(0, &mctl_phy->acdllcr);
+ writel(0, &mctl_phy->dx0dllcr);
+ writel(0, &mctl_phy->dx1dllcr);
+ if (para->bus_width == 32) {
+ writel(0, &mctl_phy->dx2dllcr);
+ writel(0, &mctl_phy->dx3dllcr);
+ }
+ udelay(22);
+
+ /* enable and release reset of dlls */
+ writel(MCTL_DLLCR_NRESET, &mctl_phy->acdllcr);
+ writel(MCTL_DLLCR_NRESET, &mctl_phy->dx0dllcr);
+ writel(MCTL_DLLCR_NRESET, &mctl_phy->dx1dllcr);
+ if (para->bus_width == 32) {
+ writel(MCTL_DLLCR_NRESET, &mctl_phy->dx2dllcr);
+ writel(MCTL_DLLCR_NRESET, &mctl_phy->dx3dllcr);
+ }
+ udelay(22);
+}
+
+static bool mctl_rank_detect(u32 *gsr0, int rank)
+{
+ const u32 done = MCTL_DX_GSR0_RANK0_TRAIN_DONE << rank;
+ const u32 err = MCTL_DX_GSR0_RANK0_TRAIN_ERR << rank;
+
+ mctl_await_completion(gsr0, done, done);
+ mctl_await_completion(gsr0 + 0x10, done, done);
+
+ return !(readl(gsr0) & err) && !(readl(gsr0 + 0x10) & err);
+}
+
+static void mctl_channel_init(int ch_index, struct dram_sun6i_para *para)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_mctl_ctl_reg *mctl_ctl;
+ struct sunxi_mctl_phy_reg *mctl_phy;
+
+ if (ch_index == 0) {
+ mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+ mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+ } else {
+ mctl_ctl = (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL1_BASE;
+ mctl_phy = (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
+ }
+
+ writel(MCTL_MCMD_NOP, &mctl_ctl->mcmd);
+ mctl_await_completion(&mctl_ctl->mcmd, MCTL_MCMD_BUSY, 0);
+
+ /* PHY initialization */
+ writel(MCTL_PGCR, &mctl_phy->pgcr);
+ writel(MCTL_MR0, &mctl_phy->mr0);
+ writel(MCTL_MR1, &mctl_phy->mr1);
+ writel(MCTL_MR2, &mctl_phy->mr2);
+ writel(MCTL_MR3, &mctl_phy->mr3);
+
+ writel((MCTL_TITMSRST << 18) | (MCTL_TDLLLOCK << 6) | MCTL_TDLLSRST,
+ &mctl_phy->ptr0);
+
+ writel((MCTL_TDINIT1 << 19) | MCTL_TDINIT0, &mctl_phy->ptr1);
+ writel((MCTL_TDINIT3 << 17) | MCTL_TDINIT2, &mctl_phy->ptr2);
+
+ writel((MCTL_TCCD << 31) | (MCTL_TRC << 25) | (MCTL_TRRD << 21) |
+ (MCTL_TRAS << 16) | (MCTL_TRCD << 12) | (MCTL_TRP << 8) |
+ (MCTL_TWTR << 5) | (MCTL_TRTP << 2) | (MCTL_TMRD << 0),
+ &mctl_phy->dtpr0);
+
+ writel((MCTL_TDQSCKMAX << 27) | (MCTL_TDQSCK << 24) |
+ (MCTL_TRFC << 16) | (MCTL_TRTODT << 11) |
+ ((MCTL_TMOD - 12) << 9) | (MCTL_TFAW << 3) | (0 << 2) |
+ (MCTL_TAOND << 0), &mctl_phy->dtpr1);
+
+ writel((MCTL_TDLLK << 19) | (MCTL_TCKE << 15) | (MCTL_TXPDLL << 10) |
+ (MCTL_TEXSR << 0), &mctl_phy->dtpr2);
+
+ writel(1, &mctl_ctl->dfitphyupdtype0);
+ writel(MCTL_DCR_DDR3, &mctl_phy->dcr);
+ writel(MCTL_DSGCR, &mctl_phy->dsgcr);
+ writel(MCTL_DXCCR, &mctl_phy->dxccr);
+ writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx0gcr);
+ writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx1gcr);
+ writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx2gcr);
+ writel(MCTL_DX_GCR | MCTL_DX_GCR_EN, &mctl_phy->dx3gcr);
+
+ mctl_await_completion(&mctl_phy->pgsr, 0x03, 0x03);
+
+ writel(CONFIG_DRAM_ZQ, &mctl_phy->zq0cr1);
+
+ setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS);
+ writel(MCTL_PIR_STEP1, &mctl_phy->pir);
+ udelay(10);
+ mctl_await_completion(&mctl_phy->pgsr, 0x1f, 0x1f);
+
+ /* rank detect */
+ if (!mctl_rank_detect(&mctl_phy->dx0gsr0, 1)) {
+ para->rank = 1;
+ clrbits_le32(&mctl_phy->pgcr, MCTL_PGCR_RANK);
+ }
+
+ /*
+ * channel detect, check channel 1 dx0 and dx1 have rank 0, if not
+ * assume nothing is connected to channel 1.
+ */
+ if (ch_index == 1 && !mctl_rank_detect(&mctl_phy->dx0gsr0, 0)) {
+ para->chan = 1;
+ clrbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN);
+ return;
+ }
+
+ /* bus width detect, if dx2 and dx3 don't have rank 0, assume 16 bit */
+ if (!mctl_rank_detect(&mctl_phy->dx2gsr0, 0)) {
+ para->bus_width = 16;
+ para->page_size = 2048;
+ setbits_le32(&mctl_phy->dx2dllcr, MCTL_DLLCR_DISABLE);
+ setbits_le32(&mctl_phy->dx3dllcr, MCTL_DLLCR_DISABLE);
+ clrbits_le32(&mctl_phy->dx2gcr, MCTL_DX_GCR_EN);
+ clrbits_le32(&mctl_phy->dx3gcr, MCTL_DX_GCR_EN);
+ }
+
+ setbits_le32(&mctl_phy->pir, MCTL_PIR_CLEAR_STATUS);
+ writel(MCTL_PIR_STEP2, &mctl_phy->pir);
+ udelay(10);
+ mctl_await_completion(&mctl_phy->pgsr, 0x11, 0x11);
+
+ if (readl(&mctl_phy->pgsr) & MCTL_PGSR_TRAIN_ERR_MASK)
+ panic("Training error initialising DRAM\n");
+
+ /* Move to configure state */
+ writel(MCTL_SCTL_CONFIG, &mctl_ctl->sctl);
+ mctl_await_completion(&mctl_ctl->sstat, 0x07, 0x01);
+
+ /* Set number of clks per micro-second */
+ writel(DRAM_CLK / 1000000, &mctl_ctl->togcnt1u);
+ /* Set number of clks per 100 nano-seconds */
+ writel(DRAM_CLK / 10000000, &mctl_ctl->togcnt100n);
+ /* Set memory timing registers */
+ writel(MCTL_TREFI, &mctl_ctl->trefi);
+ writel(MCTL_TMRD, &mctl_ctl->tmrd);
+ writel(MCTL_TRFC, &mctl_ctl->trfc);
+ writel((MCTL_TPREA << 16) | MCTL_TRP, &mctl_ctl->trp);
+ writel(MCTL_TRTW, &mctl_ctl->trtw);
+ writel(MCTL_TAL, &mctl_ctl->tal);
+ writel(MCTL_TCL, &mctl_ctl->tcl);
+ writel(MCTL_TCWL, &mctl_ctl->tcwl);
+ writel(MCTL_TRAS, &mctl_ctl->tras);
+ writel(MCTL_TRC, &mctl_ctl->trc);
+ writel(MCTL_TRCD, &mctl_ctl->trcd);
+ writel(MCTL_TRRD, &mctl_ctl->trrd);
+ writel(MCTL_TRTP, &mctl_ctl->trtp);
+ writel(MCTL_TWR, &mctl_ctl->twr);
+ writel(MCTL_TWTR, &mctl_ctl->twtr);
+ writel(MCTL_TEXSR, &mctl_ctl->texsr);
+ writel(MCTL_TXP, &mctl_ctl->txp);
+ writel(MCTL_TXPDLL, &mctl_ctl->txpdll);
+ writel(MCTL_TZQCS, &mctl_ctl->tzqcs);
+ writel(MCTL_TZQCSI, &mctl_ctl->tzqcsi);
+ writel(MCTL_TDQS, &mctl_ctl->tdqs);
+ writel(MCTL_TCKSRE, &mctl_ctl->tcksre);
+ writel(MCTL_TCKSRX, &mctl_ctl->tcksrx);
+ writel(MCTL_TCKE, &mctl_ctl->tcke);
+ writel(MCTL_TMOD, &mctl_ctl->tmod);
+ writel(MCTL_TRSTL, &mctl_ctl->trstl);
+ writel(MCTL_TZQCL, &mctl_ctl->tzqcl);
+ writel(MCTL_TMRR, &mctl_ctl->tmrr);
+ writel(MCTL_TCKESR, &mctl_ctl->tckesr);
+ writel(MCTL_TDPD, &mctl_ctl->tdpd);
+
+ /* Unknown magic performed by boot0 */
+ setbits_le32(&mctl_ctl->dfiodtcfg, 1 << 3);
+ clrbits_le32(&mctl_ctl->dfiodtcfg1, 0x1f);
+
+ /* Select 16/32-bits mode for MCTL */
+ if (para->bus_width == 16)
+ setbits_le32(&mctl_ctl->ppcfg, 1);
+
+ /* Set DFI timing registers */
+ writel(MCTL_TCWL, &mctl_ctl->dfitphywrl);
+ writel(MCTL_TCL - 1, &mctl_ctl->dfitrdden);
+ writel(MCTL_DFITPHYRDL, &mctl_ctl->dfitphyrdl);
+ writel(MCTL_DFISTCFG0, &mctl_ctl->dfistcfg0);
+
+ writel(MCTL_MCFG_DDR3, &mctl_ctl->mcfg);
+
+ /* DFI update configuration register */
+ writel(MCTL_DFIUPDCFG_UPD, &mctl_ctl->dfiupdcfg);
+
+ /* Move to access state */
+ writel(MCTL_SCTL_ACCESS, &mctl_ctl->sctl);
+ mctl_await_completion(&mctl_ctl->sstat, 0x07, 0x03);
+}
+
+static void mctl_com_init(struct dram_sun6i_para *para)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_mctl_phy_reg * const mctl_phy1 =
+ (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY1_BASE;
+ struct sunxi_prcm_reg * const prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+ writel(MCTL_CR_UNKNOWN | MCTL_CR_CHANNEL(para->chan) | MCTL_CR_DDR3 |
+ ((para->bus_width == 32) ? MCTL_CR_BUSW32 : MCTL_CR_BUSW16) |
+ MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
+ MCTL_CR_BANK(1) | MCTL_CR_RANK(para->rank), &mctl_com->cr);
+
+ /* Unknown magic performed by boot0 */
+ setbits_le32(&mctl_com->dbgcr, (1 << 6));
+
+ if (para->chan == 1) {
+ /* Shutdown channel 1 */
+ setbits_le32(&mctl_phy1->aciocr, MCTL_ACIOCR_DISABLE);
+ setbits_le32(&mctl_phy1->dxccr, MCTL_DXCCR_DISABLE);
+ clrbits_le32(&mctl_phy1->dsgcr, MCTL_DSGCR_ENABLE);
+ /*
+ * CH0 ?? this is what boot0 does. Leave as is until we can
+ * confirm this.
+ */
+ setbits_le32(&prcm->vdd_sys_pwroff,
+ PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF);
+ }
+}
+
+static void mctl_port_cfg(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* enable DRAM AXI clock for CPU access */
+ setbits_le32(&ccm->axi_gate, 1 << AXI_GATE_OFFSET_DRAM);
+
+ /* Bunch of magic writes performed by boot0 */
+ writel(0x00400302, &mctl_com->rmcr[0]);
+ writel(0x01000307, &mctl_com->rmcr[1]);
+ writel(0x00400302, &mctl_com->rmcr[2]);
+ writel(0x01000307, &mctl_com->rmcr[3]);
+ writel(0x01000307, &mctl_com->rmcr[4]);
+ writel(0x01000303, &mctl_com->rmcr[6]);
+ writel(0x01000303, &mctl_com->mmcr[0]);
+ writel(0x00400310, &mctl_com->mmcr[1]);
+ writel(0x01000307, &mctl_com->mmcr[2]);
+ writel(0x01000303, &mctl_com->mmcr[3]);
+ writel(0x01800303, &mctl_com->mmcr[4]);
+ writel(0x01800303, &mctl_com->mmcr[5]);
+ writel(0x01800303, &mctl_com->mmcr[6]);
+ writel(0x01800303, &mctl_com->mmcr[7]);
+ writel(0x01000303, &mctl_com->mmcr[8]);
+ writel(0x00000002, &mctl_com->mmcr[15]);
+ writel(0x00000310, &mctl_com->mbagcr[0]);
+ writel(0x00400310, &mctl_com->mbagcr[1]);
+ writel(0x00400310, &mctl_com->mbagcr[2]);
+ writel(0x00000307, &mctl_com->mbagcr[3]);
+ writel(0x00000317, &mctl_com->mbagcr[4]);
+ writel(0x00000307, &mctl_com->mbagcr[5]);
+}
+
+unsigned long sunxi_dram_init(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ u32 offset;
+ int bank, bus, columns;
+
+ /* Set initial parameters, these get modified by the autodetect code */
+ struct dram_sun6i_para para = {
+ .bus_width = 32,
+ .chan = 2,
+ .rank = 2,
+ .page_size = 4096,
+ .rows = 16,
+ };
+
+ /* A31s only has one channel */
+ if (sunxi_get_ss_bonding_id() == SUNXI_SS_BOND_ID_A31S)
+ para.chan = 1;
+
+ mctl_sys_init();
+
+ mctl_dll_init(0, ¶);
+ setbits_le32(&mctl_com->ccr, MCTL_CCR_CH0_CLK_EN);
+
+ if (para.chan == 2) {
+ mctl_dll_init(1, ¶);
+ setbits_le32(&mctl_com->ccr, MCTL_CCR_CH1_CLK_EN);
+ }
+
+ setbits_le32(&mctl_com->ccr, MCTL_CCR_MASTER_CLK_EN);
+
+ mctl_channel_init(0, ¶);
+ if (para.chan == 2)
+ mctl_channel_init(1, ¶);
+
+ mctl_com_init(¶);
+ mctl_port_cfg();
+
+ /*
+ * Change to 1 ch / sequence / 8192 byte pages / 16 rows /
+ * 8 bit banks / 1 rank mode.
+ */
+ clrsetbits_le32(&mctl_com->cr,
+ MCTL_CR_CHANNEL_MASK | MCTL_CR_PAGE_SIZE_MASK |
+ MCTL_CR_ROW_MASK | MCTL_CR_BANK_MASK | MCTL_CR_RANK_MASK,
+ MCTL_CR_CHANNEL(1) | MCTL_CR_SEQUENCE |
+ MCTL_CR_PAGE_SIZE(8192) | MCTL_CR_ROW(16) |
+ MCTL_CR_BANK(1) | MCTL_CR_RANK(1));
+
+ /* Detect and set page size */
+ for (columns = 7; columns < 20; columns++) {
+ if (mctl_mem_matches(1 << columns))
+ break;
+ }
+ bus = (para.bus_width == 32) ? 2 : 1;
+ columns -= bus;
+ para.page_size = (1 << columns) * (bus << 1);
+ clrsetbits_le32(&mctl_com->cr, MCTL_CR_PAGE_SIZE_MASK,
+ MCTL_CR_PAGE_SIZE(para.page_size));
+
+ /* Detect and set rows */
+ for (para.rows = 11; para.rows < 16; para.rows++) {
+ offset = 1 << (para.rows + columns + bus);
+ if (mctl_mem_matches(offset))
+ break;
+ }
+ clrsetbits_le32(&mctl_com->cr, MCTL_CR_ROW_MASK,
+ MCTL_CR_ROW(para.rows));
+
+ /* Detect bank size */
+ offset = 1 << (para.rows + columns + bus + 2);
+ bank = mctl_mem_matches(offset) ? 0 : 1;
+
+ /* Restore interleave, chan and rank values, set bank size */
+ clrsetbits_le32(&mctl_com->cr,
+ MCTL_CR_CHANNEL_MASK | MCTL_CR_SEQUENCE |
+ MCTL_CR_BANK_MASK | MCTL_CR_RANK_MASK,
+ MCTL_CR_CHANNEL(para.chan) | MCTL_CR_BANK(bank) |
+ MCTL_CR_RANK(para.rank));
+
+ return 1 << (para.rank + para.rows + bank + columns + para.chan + bus);
+}
--- /dev/null
+/*
+ * Sun8i platform dram controller init.
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Note this code uses a lot of magic hex values, that is because this code
+ * simply replays the init sequence as done by the Allwinner boot0 code, so
+ * we do not know what these values mean. There are no symbolic constants for
+ * these magic values, since we do not know how to name them and making up
+ * names for them is not useful.
+ *
+ * The register-layout of the sunxi_mctl_phy_reg-s looks a lot like the one
+ * found in the TI Keystone2 documentation:
+ * http://www.ti.com/lit/ug/spruhn7a/spruhn7a.pdf
+ * "Table4-2 DDR3 PHY Registers"
+ * This may be used as a (possible) reference for future work / cleanups.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+
+static const struct dram_para dram_para = {
+ .clock = CONFIG_DRAM_CLK,
+ .type = 3,
+ .zq = CONFIG_DRAM_ZQ,
+ .odt_en = IS_ENABLED(CONFIG_DRAM_ODT_EN),
+ .odt_correction = CONFIG_DRAM_ODT_CORRECTION,
+ .para1 = 0, /* not used (only used when tpr13 bit 31 is set */
+ .para2 = 0, /* not used (only used when tpr13 bit 31 is set */
+ .mr0 = 6736,
+ .mr1 = 4,
+ .mr2 = 16,
+ .mr3 = 0,
+ /* tpr0 - 10 contain timing constants or-ed together in u32 vals */
+ .tpr0 = 0x2ab83def,
+ .tpr1 = 0x18082356,
+ .tpr2 = 0x00034156,
+ .tpr3 = 0x448c5533,
+ .tpr4 = 0x08010d00,
+ .tpr5 = 0x0340b20f,
+ .tpr6 = 0x20d118cc,
+ .tpr7 = 0x14062485,
+ .tpr8 = 0x220d1d52,
+ .tpr9 = 0x1e078c22,
+ .tpr10 = 0x3c,
+ .tpr11 = 0, /* not used */
+ .tpr12 = 0, /* not used */
+ .tpr13 = 0x30000,
+};
+
+static void mctl_sys_init(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* enable pll5, note the divide by 2 is deliberate! */
+ clock_set_pll5(dram_para.clock * 1000000 / 2,
+ dram_para.tpr13 & 0x40000);
+
+ /* deassert ahb mctl reset */
+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+
+ /* enable ahb mctl clock */
+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+}
+
+static void mctl_apply_odt_correction(u32 *reg, int correction)
+{
+ int val;
+
+ val = (readl(reg) >> 8) & 0xff;
+ val += correction;
+
+ /* clamp */
+ if (val < 0)
+ val = 0;
+ else if (val > 255)
+ val = 255;
+
+ clrsetbits_le32(reg, 0xff00, val << 8);
+}
+
+static void mctl_init(u32 *bus_width)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+ struct sunxi_mctl_phy_reg * const mctl_phy =
+ (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
+
+ if (dram_para.tpr13 & 0x20)
+ writel(0x40b, &mctl_phy->dcr);
+ else
+ writel(0x1000040b, &mctl_phy->dcr);
+
+ if (dram_para.clock >= 480)
+ writel(0x5c000, &mctl_phy->dllgcr);
+ else
+ writel(0xdc000, &mctl_phy->dllgcr);
+
+ writel(0x0a003e3f, &mctl_phy->pgcr0);
+ writel(0x03008421, &mctl_phy->pgcr1);
+
+ writel(dram_para.mr0, &mctl_phy->mr0);
+ writel(dram_para.mr1, &mctl_phy->mr1);
+ writel(dram_para.mr2, &mctl_phy->mr2);
+ writel(dram_para.mr3, &mctl_phy->mr3);
+
+ if (!(dram_para.tpr13 & 0x10000)) {
+ clrsetbits_le32(&mctl_phy->dx0gcr, 0x3800, 0x2000);
+ clrsetbits_le32(&mctl_phy->dx1gcr, 0x3800, 0x2000);
+ }
+
+ /*
+ * All the masking and shifting below converts what I assume are DDR
+ * timing constants from Allwinner dram_para tpr format to the actual
+ * timing registers format.
+ */
+
+ writel((dram_para.tpr0 & 0x000fffff), &mctl_phy->ptr2);
+ writel((dram_para.tpr1 & 0x1fffffff), &mctl_phy->ptr3);
+ writel((dram_para.tpr0 & 0x3ff00000) >> 2 |
+ (dram_para.tpr2 & 0x0003ffff), &mctl_phy->ptr4);
+
+ writel(dram_para.tpr3, &mctl_phy->dtpr0);
+ writel(dram_para.tpr4, &mctl_phy->dtpr2);
+
+ writel(0x01000081, &mctl_phy->dtcr);
+
+ if (dram_para.clock <= 240 || !dram_para.odt_en) {
+ clrbits_le32(&mctl_phy->dx0gcr, 0x600);
+ clrbits_le32(&mctl_phy->dx1gcr, 0x600);
+ }
+ if (dram_para.clock <= 240) {
+ writel(0, &mctl_phy->odtcr);
+ writel(0, &mctl_ctl->odtmap);
+ }
+
+ writel(((dram_para.tpr5 & 0x0f00) << 12) |
+ ((dram_para.tpr5 & 0x00f8) << 9) |
+ ((dram_para.tpr5 & 0x0007) << 8),
+ &mctl_ctl->rfshctl0);
+
+ writel(((dram_para.tpr5 & 0x0003f000) << 12) |
+ ((dram_para.tpr5 & 0x00fc0000) >> 2) |
+ ((dram_para.tpr5 & 0x3f000000) >> 16) |
+ ((dram_para.tpr6 & 0x0000003f) >> 0),
+ &mctl_ctl->dramtmg0);
+
+ writel(((dram_para.tpr6 & 0x000007c0) << 10) |
+ ((dram_para.tpr6 & 0x0000f800) >> 3) |
+ ((dram_para.tpr6 & 0x003f0000) >> 16),
+ &mctl_ctl->dramtmg1);
+
+ writel(((dram_para.tpr6 & 0x0fc00000) << 2) |
+ ((dram_para.tpr7 & 0x0000001f) << 16) |
+ ((dram_para.tpr7 & 0x000003e0) << 3) |
+ ((dram_para.tpr7 & 0x0000fc00) >> 10),
+ &mctl_ctl->dramtmg2);
+
+ writel(((dram_para.tpr7 & 0x03ff0000) >> 16) |
+ ((dram_para.tpr6 & 0xf0000000) >> 16),
+ &mctl_ctl->dramtmg3);
+
+ writel(((dram_para.tpr7 & 0x3c000000) >> 2 ) |
+ ((dram_para.tpr8 & 0x00000007) << 16) |
+ ((dram_para.tpr8 & 0x00000038) << 5) |
+ ((dram_para.tpr8 & 0x000003c0) >> 6),
+ &mctl_ctl->dramtmg4);
+
+ writel(((dram_para.tpr8 & 0x00003c00) << 14) |
+ ((dram_para.tpr8 & 0x0003c000) << 2) |
+ ((dram_para.tpr8 & 0x00fc0000) >> 10) |
+ ((dram_para.tpr8 & 0x0f000000) >> 24),
+ &mctl_ctl->dramtmg5);
+
+ writel(0x00000008, &mctl_ctl->dramtmg8);
+
+ writel(((dram_para.tpr8 & 0xf0000000) >> 4) |
+ ((dram_para.tpr9 & 0x00007c00) << 6) |
+ ((dram_para.tpr9 & 0x000003e0) << 3) |
+ ((dram_para.tpr9 & 0x0000001f) >> 0),
+ &mctl_ctl->pitmg0);
+
+ setbits_le32(&mctl_ctl->pitmg1, 0x80000);
+
+ writel(((dram_para.tpr9 & 0x003f8000) << 9) | 0x2001,
+ &mctl_ctl->sched);
+
+ writel((dram_para.mr0 << 16) | dram_para.mr1, &mctl_ctl->init3);
+ writel((dram_para.mr2 << 16) | dram_para.mr3, &mctl_ctl->init4);
+
+ writel(0x00000000, &mctl_ctl->pimisc);
+ writel(0x80000000, &mctl_ctl->upd0);
+
+ writel(((dram_para.tpr9 & 0xffc00000) >> 22) |
+ ((dram_para.tpr10 & 0x00000fff) << 16),
+ &mctl_ctl->rfshtmg);
+
+ if (dram_para.tpr13 & 0x20)
+ writel(0x01040001, &mctl_ctl->mstr);
+ else
+ writel(0x01040401, &mctl_ctl->mstr);
+
+ if (!(dram_para.tpr13 & 0x20000)) {
+ writel(0x00000002, &mctl_ctl->pwrctl);
+ writel(0x00008001, &mctl_ctl->pwrtmg);
+ }
+
+ writel(0x00000001, &mctl_ctl->rfshctl3);
+ writel(0x00000001, &mctl_ctl->pimisc);
+
+ /* deassert dram_clk_cfg reset */
+ setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
+
+ setbits_le32(&mctl_com->ccr, 0x80000);
+
+ /* zq stuff */
+ writel((dram_para.zq >> 8) & 0xff, &mctl_phy->zqcr1);
+
+ writel(0x00000003, &mctl_phy->pir);
+ udelay(10);
+ mctl_await_completion(&mctl_phy->pgsr0, 0x09, 0x09);
+
+ writel(readl(&mctl_phy->zqsr0) | 0x10000000, &mctl_phy->zqcr2);
+ writel(dram_para.zq & 0xff, &mctl_phy->zqcr1);
+
+ /* A23-v1.0 SDK uses 0xfdf3, A23-v2.0 SDK uses 0x5f3 */
+ writel(0x000005f3, &mctl_phy->pir);
+ udelay(10);
+ mctl_await_completion(&mctl_phy->pgsr0, 0x03, 0x03);
+
+ if (readl(&mctl_phy->dx1gsr0) & 0x1000000) {
+ *bus_width = 8;
+ writel(0, &mctl_phy->dx1gcr);
+ writel(dram_para.zq & 0xff, &mctl_phy->zqcr1);
+ writel(0x5f3, &mctl_phy->pir);
+ udelay(10000);
+ setbits_le32(&mctl_ctl->mstr, 0x1000);
+ } else
+ *bus_width = 16;
+
+ if (dram_para.odt_correction) {
+ mctl_apply_odt_correction(&mctl_phy->dx0lcdlr1,
+ dram_para.odt_correction);
+ mctl_apply_odt_correction(&mctl_phy->dx1lcdlr1,
+ dram_para.odt_correction);
+ }
+
+ mctl_await_completion(&mctl_ctl->statr, 0x01, 0x01);
+
+ writel(0x08003e3f, &mctl_phy->pgcr0);
+ writel(0x00000000, &mctl_ctl->rfshctl3);
+}
+
+unsigned long sunxi_dram_init(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ const u32 columns = 13;
+ u32 bus, bus_width, offset, page_size, rows;
+
+ mctl_sys_init();
+ mctl_init(&bus_width);
+
+ if (bus_width == 16) {
+ page_size = 8;
+ bus = 1;
+ } else {
+ page_size = 7;
+ bus = 0;
+ }
+
+ if (!(dram_para.tpr13 & 0x80000000)) {
+ /* Detect and set rows */
+ writel(0x000310f4 | MCTL_CR_PAGE_SIZE(page_size),
+ &mctl_com->cr);
+ setbits_le32(&mctl_com->swonr, 0x0003ffff);
+ for (rows = 11; rows < 16; rows++) {
+ offset = 1 << (rows + columns + bus);
+ if (mctl_mem_matches(offset))
+ break;
+ }
+ clrsetbits_le32(&mctl_com->cr, MCTL_CR_ROW_MASK,
+ MCTL_CR_ROW(rows));
+ } else {
+ rows = (dram_para.para1 >> 16) & 0xff;
+ writel(((dram_para.para2 & 0x000000f0) << 11) |
+ ((rows - 1) << 4) |
+ ((dram_para.para1 & 0x0f000000) >> 22) |
+ 0x31000 | MCTL_CR_PAGE_SIZE(page_size),
+ &mctl_com->cr);
+ setbits_le32(&mctl_com->swonr, 0x0003ffff);
+ }
+
+ /* Setup DRAM master priority? If this is left out things still work */
+ writel(0x00000008, &mctl_com->mcr0_0);
+ writel(0x0001000d, &mctl_com->mcr1_0);
+ writel(0x00000004, &mctl_com->mcr0_1);
+ writel(0x00000080, &mctl_com->mcr1_1);
+ writel(0x00000004, &mctl_com->mcr0_2);
+ writel(0x00000019, &mctl_com->mcr1_2);
+ writel(0x00000004, &mctl_com->mcr0_3);
+ writel(0x00000080, &mctl_com->mcr1_3);
+ writel(0x00000004, &mctl_com->mcr0_4);
+ writel(0x01010040, &mctl_com->mcr1_4);
+ writel(0x00000004, &mctl_com->mcr0_5);
+ writel(0x0001002f, &mctl_com->mcr1_5);
+ writel(0x00000004, &mctl_com->mcr0_6);
+ writel(0x00010020, &mctl_com->mcr1_6);
+ writel(0x00000004, &mctl_com->mcr0_7);
+ writel(0x00010020, &mctl_com->mcr1_7);
+ writel(0x00000008, &mctl_com->mcr0_8);
+ writel(0x00000001, &mctl_com->mcr1_8);
+ writel(0x00000008, &mctl_com->mcr0_9);
+ writel(0x00000005, &mctl_com->mcr1_9);
+ writel(0x00000008, &mctl_com->mcr0_10);
+ writel(0x00000003, &mctl_com->mcr1_10);
+ writel(0x00000008, &mctl_com->mcr0_11);
+ writel(0x00000005, &mctl_com->mcr1_11);
+ writel(0x00000008, &mctl_com->mcr0_12);
+ writel(0x00000003, &mctl_com->mcr1_12);
+ writel(0x00000008, &mctl_com->mcr0_13);
+ writel(0x00000004, &mctl_com->mcr1_13);
+ writel(0x00000008, &mctl_com->mcr0_14);
+ writel(0x00000002, &mctl_com->mcr1_14);
+ writel(0x00000008, &mctl_com->mcr0_15);
+ writel(0x00000003, &mctl_com->mcr1_15);
+ writel(0x00010138, &mctl_com->bwcr);
+
+ return 1 << (rows + columns + bus);
+}
--- /dev/null
+/*
+ * Sun8i a33 platform dram controller init.
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ * Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+
+/* PLL runs at 2x dram-clk, controller runs at PLL / 4 (dram-clk / 2) */
+#define DRAM_CLK_MUL 2
+#define DRAM_CLK_DIV 4
+#define DRAM_SIGMA_DELTA_ENABLE 1
+
+struct dram_para {
+ u8 cs1;
+ u8 seq;
+ u8 bank;
+ u8 rank;
+ u8 rows;
+ u8 bus_width;
+ u16 page_size;
+};
+
+static void mctl_set_cr(struct dram_para *para)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+ writel(MCTL_CR_CS1_CONTROL(para->cs1) | MCTL_CR_UNKNOWN |
+ MCTL_CR_CHANNEL(1) | MCTL_CR_DDR3 |
+ (para->seq ? MCTL_CR_SEQUENCE : 0) |
+ ((para->bus_width == 16) ? MCTL_CR_BUSW16 : MCTL_CR_BUSW8) |
+ MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
+ MCTL_CR_BANK(para->bank) | MCTL_CR_RANK(para->rank),
+ &mctl_com->cr);
+}
+
+static void auto_detect_dram_size(struct dram_para *para)
+{
+ u8 orig_rank = para->rank;
+ int rows, columns;
+
+ /* Row detect */
+ para->page_size = 512;
+ para->seq = 1;
+ para->rows = 16;
+ para->rank = 1;
+ mctl_set_cr(para);
+ for (rows = 11 ; rows < 16 ; rows++) {
+ if (mctl_mem_matches(1 << (rows + 9))) /* row-column */
+ break;
+ }
+
+ /* Column (page size) detect */
+ para->rows = 11;
+ para->page_size = 8192;
+ mctl_set_cr(para);
+ for (columns = 9 ; columns < 13 ; columns++) {
+ if (mctl_mem_matches(1 << columns))
+ break;
+ }
+
+ para->seq = 0;
+ para->rank = orig_rank;
+ para->rows = rows;
+ para->page_size = 1 << columns;
+ mctl_set_cr(para);
+}
+
+static inline int ns_to_t(int nanoseconds)
+{
+ const unsigned int ctrl_freq =
+ CONFIG_DRAM_CLK * DRAM_CLK_MUL / DRAM_CLK_DIV;
+
+ return (ctrl_freq * nanoseconds + 999) / 1000;
+}
+
+static void auto_set_timing_para(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+ u32 reg_val;
+
+ u8 tccd = 2;
+ u8 tfaw = ns_to_t(50);
+ u8 trrd = max(ns_to_t(10), 4);
+ u8 trcd = ns_to_t(15);
+ u8 trc = ns_to_t(53);
+ u8 txp = max(ns_to_t(8), 3);
+ u8 twtr = max(ns_to_t(8), 4);
+ u8 trtp = max(ns_to_t(8), 4);
+ u8 twr = max(ns_to_t(15), 3);
+ u8 trp = ns_to_t(15);
+ u8 tras = ns_to_t(38);
+
+ u16 trefi = ns_to_t(7800) / 32;
+ u16 trfc = ns_to_t(350);
+
+ /* Fixed timing parameters */
+ u8 tmrw = 0;
+ u8 tmrd = 4;
+ u8 tmod = 12;
+ u8 tcke = 3;
+ u8 tcksrx = 5;
+ u8 tcksre = 5;
+ u8 tckesr = 4;
+ u8 trasmax = 24;
+ u8 tcl = 6; /* CL 12 */
+ u8 tcwl = 4; /* CWL 8 */
+ u8 t_rdata_en = 4;
+ u8 wr_latency = 2;
+
+ u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */
+ u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1; /* 360ns */
+ u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
+ u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
+
+ u8 twtp = tcwl + 2 + twr; /* WL + BL / 2 + tWR */
+ u8 twr2rd = tcwl + 2 + twtr; /* WL + BL / 2 + tWTR */
+ u8 trd2wr = tcl + 2 + 1 - tcwl; /* RL + BL / 2 + 2 - WL */
+
+ /* Set work mode register */
+ mctl_set_cr(para);
+ /* Set mode register */
+ writel(MCTL_MR0, &mctl_ctl->mr0);
+ writel(MCTL_MR1, &mctl_ctl->mr1);
+ writel(MCTL_MR2, &mctl_ctl->mr2);
+ writel(MCTL_MR3, &mctl_ctl->mr3);
+ /* Set dram timing */
+ reg_val = (twtp << 24) | (tfaw << 16) | (trasmax << 8) | (tras << 0);
+ writel(reg_val, &mctl_ctl->dramtmg0);
+ reg_val = (txp << 16) | (trtp << 8) | (trc << 0);
+ writel(reg_val, &mctl_ctl->dramtmg1);
+ reg_val = (tcwl << 24) | (tcl << 16) | (trd2wr << 8) | (twr2rd << 0);
+ writel(reg_val, &mctl_ctl->dramtmg2);
+ reg_val = (tmrw << 16) | (tmrd << 12) | (tmod << 0);
+ writel(reg_val, &mctl_ctl->dramtmg3);
+ reg_val = (trcd << 24) | (tccd << 16) | (trrd << 8) | (trp << 0);
+ writel(reg_val, &mctl_ctl->dramtmg4);
+ reg_val = (tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | (tcke << 0);
+ writel(reg_val, &mctl_ctl->dramtmg5);
+ /* Set two rank timing and exit self-refresh timing */
+ reg_val = readl(&mctl_ctl->dramtmg8);
+ reg_val &= ~(0xff << 8);
+ reg_val &= ~(0xff << 0);
+ reg_val |= (0x33 << 8);
+ reg_val |= (0x8 << 0);
+ writel(reg_val, &mctl_ctl->dramtmg8);
+ /* Set phy interface time */
+ reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8)
+ | (wr_latency << 0);
+ /* PHY interface write latency and read latency configure */
+ writel(reg_val, &mctl_ctl->pitmg0);
+ /* Set phy time PTR0-2 use default */
+ writel(((tdinit0 << 0) | (tdinit1 << 20)), &mctl_ctl->ptr3);
+ writel(((tdinit2 << 0) | (tdinit3 << 20)), &mctl_ctl->ptr4);
+ /* Set refresh timing */
+ reg_val = (trefi << 16) | (trfc << 0);
+ writel(reg_val, &mctl_ctl->rfshtmg);
+}
+
+static void mctl_set_pir(u32 val)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ writel(val, &mctl_ctl->pir);
+ mctl_await_completion(&mctl_ctl->pgsr0, 0x1, 0x1);
+}
+
+static void mctl_data_train_cfg(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ if (para->rank == 2)
+ clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x3 << 24);
+ else
+ clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x1 << 24);
+}
+
+static int mctl_train_dram(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ mctl_data_train_cfg(para);
+ mctl_set_pir(0x5f3);
+
+ return ((readl(&mctl_ctl->pgsr0) >> 20) & 0xff) ? -EIO : 0;
+}
+
+static int mctl_channel_init(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ u32 low_data_lines_status; /* Training status of datalines 0 - 7 */
+ u32 high_data_lines_status; /* Training status of datalines 8 - 15 */
+
+ auto_set_timing_para(para);
+
+ /* Disable dram VTC */
+ clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0);
+
+ /* Set ODT */
+ if ((CONFIG_DRAM_CLK > 400) && IS_ENABLED(CONFIG_DRAM_ODT_EN)) {
+ setbits_le32(DXnGCR0(0), 0x3 << 9);
+ setbits_le32(DXnGCR0(1), 0x3 << 9);
+ } else {
+ clrbits_le32(DXnGCR0(0), 0x3 << 9);
+ clrbits_le32(DXnGCR0(1), 0x3 << 9);
+ }
+
+ /* set PLL configuration */
+ if (CONFIG_DRAM_CLK >= 480)
+ setbits_le32(&mctl_ctl->pllgcr, 0x1 << 18);
+ else
+ setbits_le32(&mctl_ctl->pllgcr, 0x3 << 18);
+
+ /* Auto detect dram config, set 2 rank and 16bit bus-width */
+ para->cs1 = 0;
+ para->rank = 2;
+ para->bus_width = 16;
+ mctl_set_cr(para);
+
+ /* Open DQS gating */
+ clrbits_le32(&mctl_ctl->pgcr2, (0x3 << 6));
+ clrbits_le32(&mctl_ctl->dqsgmr, (0x1 << 8) | (0x7));
+
+ mctl_data_train_cfg(para);
+
+ /* ZQ calibration */
+ writel(CONFIG_DRAM_ZQ & 0xff, &mctl_ctl->zqcr1);
+ /* CA calibration */
+ mctl_set_pir(0x00000003);
+ /* More ZQ calibration */
+ writel(readl(&mctl_ctl->zqsr0) | 0x10000000, &mctl_ctl->zqcr2);
+ writel((CONFIG_DRAM_ZQ >> 8) & 0xff, &mctl_ctl->zqcr1);
+
+ /* DQS gate training */
+ if (mctl_train_dram(para) != 0) {
+ low_data_lines_status = (readl(DXnGSR0(0)) >> 24) & 0x03;
+ high_data_lines_status = (readl(DXnGSR0(1)) >> 24) & 0x03;
+
+ if (low_data_lines_status == 0x3)
+ return -EIO;
+
+ /* DRAM has only one rank */
+ para->rank = 1;
+ mctl_set_cr(para);
+
+ if (low_data_lines_status == high_data_lines_status)
+ goto done; /* 16 bit bus, 1 rank */
+
+ if (!(low_data_lines_status & high_data_lines_status)) {
+ /* Retry 16 bit bus-width with CS1 set */
+ para->cs1 = 1;
+ mctl_set_cr(para);
+ if (mctl_train_dram(para) == 0)
+ goto done;
+ }
+
+ /* Try 8 bit bus-width */
+ writel(0x0, DXnGCR0(1)); /* Disable high DQ */
+ para->cs1 = 0;
+ para->bus_width = 8;
+ mctl_set_cr(para);
+ if (mctl_train_dram(para) != 0)
+ return -EIO;
+ }
+done:
+ /* Check the dramc status */
+ mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
+
+ /* Close DQS gating */
+ setbits_le32(&mctl_ctl->pgcr2, 0x3 << 6);
+
+ /* Enable master access */
+ writel(0xffffffff, &mctl_com->maer);
+
+ return 0;
+}
+
+static void mctl_sys_init(struct dram_para *para)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+ clrsetbits_le32(&ccm->dram_pll_cfg, CCM_DRAMPLL_CFG_SRC_MASK,
+ CCM_DRAMPLL_CFG_SRC_PLL11);
+
+ clock_set_pll11(CONFIG_DRAM_CLK * 1000000 * DRAM_CLK_MUL,
+ DRAM_SIGMA_DELTA_ENABLE);
+
+ clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV_MASK,
+ CCM_DRAMCLK_CFG_DIV(DRAM_CLK_DIV) |
+ CCM_DRAMCLK_CFG_RST | CCM_DRAMCLK_CFG_UPD);
+ mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+ setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+ setbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
+
+ /* Set dram master access priority */
+ writel(0x0, &mctl_com->mapr);
+ writel(0x0f802f01, &mctl_ctl->sched);
+ writel(0x0000400f, &mctl_ctl->clken); /* normal */
+
+ udelay(250);
+}
+
+unsigned long sunxi_dram_init(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ struct dram_para para = {
+ .cs1 = 0,
+ .bank = 1,
+ .rank = 1,
+ .rows = 15,
+ .bus_width = 16,
+ .page_size = 2048,
+ };
+
+ mctl_sys_init(¶);
+
+ if (mctl_channel_init(¶) != 0)
+ return 0;
+
+ auto_detect_dram_size(¶);
+
+ /* Enable master software clk */
+ writel(readl(&mctl_com->swonr) | 0x3ffff, &mctl_com->swonr);
+
+ /* Set DRAM ODT MAP */
+ if (para.rank == 2)
+ writel(0x00000303, &mctl_ctl->odtmap);
+ else
+ writel(0x00000201, &mctl_ctl->odtmap);
+
+ return para.page_size * (para.bus_width / 8) *
+ (1 << (para.bank + para.rank + para.rows));
+}
--- /dev/null
+/*
+ * Sun8i a33 platform dram controller init.
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ * Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/prcm.h>
+
+#define DRAM_CLK_MUL 2
+#define DRAM_CLK_DIV 1
+
+struct dram_para {
+ u8 cs1;
+ u8 seq;
+ u8 bank;
+ u8 rank;
+ u8 rows;
+ u8 bus_width;
+ u8 dram_type;
+ u16 page_size;
+};
+
+static void mctl_set_cr(struct dram_para *para)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+ writel(MCTL_CR_CS1_CONTROL(para->cs1) | MCTL_CR_UNKNOWN |
+ MCTL_CR_CHANNEL(1) | MCTL_CR_DRAM_TYPE(para->dram_type) |
+ (para->seq ? MCTL_CR_SEQUENCE : 0) |
+ ((para->bus_width == 16) ? MCTL_CR_BUSW16 : MCTL_CR_BUSW8) |
+ MCTL_CR_PAGE_SIZE(para->page_size) | MCTL_CR_ROW(para->rows) |
+ MCTL_CR_BANK(para->bank) | MCTL_CR_RANK(para->rank),
+ &mctl_com->cr);
+}
+
+static void auto_detect_dram_size(struct dram_para *para)
+{
+ u8 orig_rank = para->rank;
+ int rows, columns;
+
+ /* Row detect */
+ para->page_size = 512;
+ para->seq = 1;
+ para->rows = 16;
+ para->rank = 1;
+ mctl_set_cr(para);
+ for (rows = 11 ; rows < 16 ; rows++) {
+ if (mctl_mem_matches(1 << (rows + 9))) /* row-column */
+ break;
+ }
+
+ /* Column (page size) detect */
+ para->rows = 11;
+ para->page_size = 8192;
+ mctl_set_cr(para);
+ for (columns = 9 ; columns < 13 ; columns++) {
+ if (mctl_mem_matches(1 << columns))
+ break;
+ }
+
+ para->seq = 0;
+ para->rank = orig_rank;
+ para->rows = rows;
+ para->page_size = 1 << columns;
+ mctl_set_cr(para);
+}
+
+static inline int ns_to_t(int nanoseconds)
+{
+ const unsigned int ctrl_freq =
+ CONFIG_DRAM_CLK * DRAM_CLK_MUL / DRAM_CLK_DIV;
+
+ return (ctrl_freq * nanoseconds + 999) / 1000;
+}
+
+static void auto_set_timing_para(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ u32 reg_val;
+
+ u8 tccd = 2;
+ u8 tfaw = ns_to_t(50);
+ u8 trrd = max(ns_to_t(10), 4);
+ u8 trcd = ns_to_t(15);
+ u8 trc = ns_to_t(53);
+ u8 txp = max(ns_to_t(8), 3);
+ u8 twtr = max(ns_to_t(8), 4);
+ u8 trtp = max(ns_to_t(8), 4);
+ u8 twr = max(ns_to_t(15), 3);
+ u8 trp = ns_to_t(15);
+ u8 tras = ns_to_t(38);
+
+ u16 trefi = ns_to_t(7800) / 32;
+ u16 trfc = ns_to_t(350);
+
+ /* Fixed timing parameters */
+ u8 tmrw = 0;
+ u8 tmrd = 4;
+ u8 tmod = 12;
+ u8 tcke = 3;
+ u8 tcksrx = 5;
+ u8 tcksre = 5;
+ u8 tckesr = 4;
+ u8 trasmax = 24;
+ u8 tcl = 6; /* CL 12 */
+ u8 tcwl = 4; /* CWL 8 */
+ u8 t_rdata_en = 4;
+ u8 wr_latency = 2;
+
+ u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */
+ u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1; /* 360ns */
+ u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
+ u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
+
+ u8 twtp = tcwl + 2 + twr; /* WL + BL / 2 + tWR */
+ u8 twr2rd = tcwl + 2 + twtr; /* WL + BL / 2 + tWTR */
+ u8 trd2wr = tcl + 2 + 1 - tcwl; /* RL + BL / 2 + 2 - WL */
+
+ /* Set work mode register */
+ mctl_set_cr(para);
+ /* Set mode register */
+ if (para->dram_type == DRAM_TYPE_DDR3) {
+ writel(MCTL_MR0, &mctl_ctl->mr0);
+ writel(MCTL_MR1, &mctl_ctl->mr1);
+ writel(MCTL_MR2, &mctl_ctl->mr2);
+ writel(MCTL_MR3, &mctl_ctl->mr3);
+ } else if (para->dram_type == DRAM_TYPE_LPDDR3) {
+ writel(MCTL_LPDDR3_MR0, &mctl_ctl->mr0);
+ writel(MCTL_LPDDR3_MR1, &mctl_ctl->mr1);
+ writel(MCTL_LPDDR3_MR2, &mctl_ctl->mr2);
+ writel(MCTL_LPDDR3_MR3, &mctl_ctl->mr3);
+
+ /* timing parameters for LPDDR3 */
+ tfaw = max(ns_to_t(50), 4);
+ trrd = max(ns_to_t(10), 2);
+ trcd = max(ns_to_t(24), 2);
+ trc = ns_to_t(70);
+ txp = max(ns_to_t(8), 2);
+ twtr = max(ns_to_t(8), 2);
+ trtp = max(ns_to_t(8), 2);
+ trp = max(ns_to_t(27), 2);
+ tras = ns_to_t(42);
+ trefi = ns_to_t(3900) / 32;
+ trfc = ns_to_t(210);
+ tmrw = 5;
+ tmrd = 5;
+ tckesr = 5;
+ tcwl = 3; /* CWL 8 */
+ t_rdata_en = 5;
+ tdinit0 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
+ tdinit1 = (100 * CONFIG_DRAM_CLK) / 1000 + 1; /* 100ns */
+ tdinit2 = (11 * CONFIG_DRAM_CLK) + 1; /* 200us */
+ tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
+ twtp = tcwl + 4 + twr + 1; /* CWL + BL/2 + tWR */
+ twr2rd = tcwl + 4 + 1 + twtr; /* WL + BL / 2 + tWTR */
+ trd2wr = tcl + 4 + 5 - tcwl + 1; /* RL + BL / 2 + 2 - WL */
+ }
+ /* Set dram timing */
+ reg_val = (twtp << 24) | (tfaw << 16) | (trasmax << 8) | (tras << 0);
+ writel(reg_val, &mctl_ctl->dramtmg0);
+ reg_val = (txp << 16) | (trtp << 8) | (trc << 0);
+ writel(reg_val, &mctl_ctl->dramtmg1);
+ reg_val = (tcwl << 24) | (tcl << 16) | (trd2wr << 8) | (twr2rd << 0);
+ writel(reg_val, &mctl_ctl->dramtmg2);
+ reg_val = (tmrw << 16) | (tmrd << 12) | (tmod << 0);
+ writel(reg_val, &mctl_ctl->dramtmg3);
+ reg_val = (trcd << 24) | (tccd << 16) | (trrd << 8) | (trp << 0);
+ writel(reg_val, &mctl_ctl->dramtmg4);
+ reg_val = (tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | (tcke << 0);
+ writel(reg_val, &mctl_ctl->dramtmg5);
+ /* Set two rank timing and exit self-refresh timing */
+ reg_val = readl(&mctl_ctl->dramtmg8);
+ reg_val &= ~(0xff << 8);
+ reg_val &= ~(0xff << 0);
+ reg_val |= (0x33 << 8);
+ reg_val |= (0x8 << 0);
+ writel(reg_val, &mctl_ctl->dramtmg8);
+ /* Set phy interface time */
+ reg_val = (0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8)
+ | (wr_latency << 0);
+ /* PHY interface write latency and read latency configure */
+ writel(reg_val, &mctl_ctl->pitmg0);
+ /* Set phy time PTR0-2 use default */
+ writel(((tdinit0 << 0) | (tdinit1 << 20)), &mctl_ctl->ptr3);
+ writel(((tdinit2 << 0) | (tdinit3 << 20)), &mctl_ctl->ptr4);
+ /* Set refresh timing */
+ reg_val = (trefi << 16) | (trfc << 0);
+ writel(reg_val, &mctl_ctl->rfshtmg);
+}
+
+static void mctl_set_pir(u32 val)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ writel(val, &mctl_ctl->pir);
+ mctl_await_completion(&mctl_ctl->pgsr0, 0x1, 0x1);
+}
+
+static void mctl_data_train_cfg(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ if (para->rank == 2)
+ clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x3 << 24);
+ else
+ clrsetbits_le32(&mctl_ctl->dtcr, 0x3 << 24, 0x1 << 24);
+}
+
+static int mctl_train_dram(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ mctl_data_train_cfg(para);
+ mctl_set_pir(0x5f3);
+
+ return ((readl(&mctl_ctl->pgsr0) >> 20) & 0xff) ? -EIO : 0;
+}
+
+static void set_master_priority(void)
+{
+ writel(0x00a0000d, MCTL_MASTER_CFG0(0));
+ writel(0x00500064, MCTL_MASTER_CFG1(0));
+ writel(0x07000009, MCTL_MASTER_CFG0(1));
+ writel(0x00000600, MCTL_MASTER_CFG1(1));
+ writel(0x01000009, MCTL_MASTER_CFG0(3));
+ writel(0x00000064, MCTL_MASTER_CFG1(3));
+ writel(0x08000009, MCTL_MASTER_CFG0(4));
+ writel(0x00000640, MCTL_MASTER_CFG1(4));
+ writel(0x20000308, MCTL_MASTER_CFG0(8));
+ writel(0x00001000, MCTL_MASTER_CFG1(8));
+ writel(0x02800009, MCTL_MASTER_CFG0(9));
+ writel(0x00000100, MCTL_MASTER_CFG1(9));
+ writel(0x01800009, MCTL_MASTER_CFG0(5));
+ writel(0x00000100, MCTL_MASTER_CFG1(5));
+ writel(0x01800009, MCTL_MASTER_CFG0(7));
+ writel(0x00000100, MCTL_MASTER_CFG1(7));
+ writel(0x00640009, MCTL_MASTER_CFG0(6));
+ writel(0x00000032, MCTL_MASTER_CFG1(6));
+ writel(0x0100000d, MCTL_MASTER_CFG0(2));
+ writel(0x00500080, MCTL_MASTER_CFG1(2));
+}
+
+static int mctl_channel_init(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ u32 low_data_lines_status; /* Training status of datalines 0 - 7 */
+ u32 high_data_lines_status; /* Training status of datalines 8 - 15 */
+ u32 i, rval;
+
+ auto_set_timing_para(para);
+
+ /* Set dram master access priority */
+ writel(0x000101a0, &mctl_com->bwcr);
+ /* set cpu high priority */
+ writel(0x1, &mctl_com->mapr);
+ set_master_priority();
+ udelay(250);
+
+ /* Disable dram VTC */
+ clrbits_le32(&mctl_ctl->pgcr0, 0x3f << 0 | 0x1 << 30);
+ clrsetbits_le32(&mctl_ctl->pgcr1, 0x1 << 24, 0x1 << 26);
+
+ writel(0x94be6fa3, MCTL_PROTECT);
+ udelay(100);
+ clrsetbits_le32(MX_UPD2, 0xfff << 16, 0x50 << 16);
+ writel(0x0, MCTL_PROTECT);
+ udelay(100);
+
+
+ /* Set ODT */
+ if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
+ rval = 0x0;
+ else
+ rval = 0x2;
+
+ for (i = 0 ; i < 11 ; i++) {
+ clrsetbits_le32(DATX0IOCR(i), (0x3 << 24) | (0x3 << 16),
+ rval << 24);
+ clrsetbits_le32(DATX1IOCR(i), (0x3 << 24) | (0x3 << 16),
+ rval << 24);
+ clrsetbits_le32(DATX2IOCR(i), (0x3 << 24) | (0x3 << 16),
+ rval << 24);
+ clrsetbits_le32(DATX3IOCR(i), (0x3 << 24) | (0x3 << 16),
+ rval << 24);
+ }
+
+ for (i = 0; i < 31; i++)
+ clrsetbits_le32(CAIOCR(i), 0x3 << 26 | 0x3 << 16, 0x2 << 26);
+
+ /* set PLL configuration */
+ if (CONFIG_DRAM_CLK >= 480)
+ setbits_le32(&mctl_ctl->pllgcr, 0x1 << 19);
+ else
+ setbits_le32(&mctl_ctl->pllgcr, 0x3 << 19);
+
+ /* Auto detect dram config, set 2 rank and 16bit bus-width */
+ para->cs1 = 0;
+ para->rank = 2;
+ para->bus_width = 16;
+ mctl_set_cr(para);
+
+ /* Open DQS gating */
+ clrbits_le32(&mctl_ctl->pgcr2, (0x3 << 6));
+ clrbits_le32(&mctl_ctl->dqsgmr, (0x1 << 8) | (0x7));
+
+ if (para->dram_type == DRAM_TYPE_LPDDR3)
+ clrsetbits_le32(&mctl_ctl->dxccr, (0x1 << 27) | (0x3<<6) ,
+ 0x1 << 31);
+ if (readl(&mctl_com->cr) & 0x1)
+ writel(0x00000303, &mctl_ctl->odtmap);
+ else
+ writel(0x00000201, &mctl_ctl->odtmap);
+
+ mctl_data_train_cfg(para);
+ /* ZQ calibration */
+ clrsetbits_le32(ZQnPR(0), 0x000000ff, CONFIG_DRAM_ZQ & 0xff);
+ clrsetbits_le32(ZQnPR(1), 0x000000ff, (CONFIG_DRAM_ZQ >> 8) & 0xff);
+ /* CA calibration */
+
+ if (para->dram_type == DRAM_TYPE_DDR3)
+ mctl_set_pir(0x0201f3 | 0x1<<10);
+ else
+ mctl_set_pir(0x020173 | 0x1<<10);
+
+ /* DQS gate training */
+ if (mctl_train_dram(para) != 0) {
+ low_data_lines_status = (readl(DXnGSR0(0)) >> 24) & 0x03;
+ high_data_lines_status = (readl(DXnGSR0(1)) >> 24) & 0x03;
+
+ if (low_data_lines_status == 0x3)
+ return -EIO;
+
+ /* DRAM has only one rank */
+ para->rank = 1;
+ mctl_set_cr(para);
+
+ if (low_data_lines_status == high_data_lines_status)
+ goto done; /* 16 bit bus, 1 rank */
+
+ if (!(low_data_lines_status & high_data_lines_status)) {
+ /* Retry 16 bit bus-width with CS1 set */
+ para->cs1 = 1;
+ mctl_set_cr(para);
+ if (mctl_train_dram(para) == 0)
+ goto done;
+ }
+
+ /* Try 8 bit bus-width */
+ writel(0x0, DXnGCR0(1)); /* Disable high DQ */
+ para->cs1 = 0;
+ para->bus_width = 8;
+ mctl_set_cr(para);
+ if (mctl_train_dram(para) != 0)
+ return -EIO;
+ }
+done:
+ /* Check the dramc status */
+ mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
+
+ /* Close DQS gating */
+ setbits_le32(&mctl_ctl->pgcr2, 0x3 << 6);
+
+ /* set PGCR3,CKE polarity */
+ writel(0x00aa0060, &mctl_ctl->pgcr3);
+ /* Enable master access */
+ writel(0xffffffff, &mctl_com->maer);
+
+ return 0;
+}
+
+static void mctl_sys_init(struct dram_para *para)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ clrbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE);
+ clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+ clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+ clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+ clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
+ udelay(1000);
+ clrbits_le32(&ccm->dram_clk_cfg, 0x01<<31);
+
+ clock_set_pll5(CONFIG_DRAM_CLK * 1000000 * DRAM_CLK_MUL);
+
+ clrsetbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_DIV_MASK,
+ CCM_DRAMCLK_CFG_DIV(DRAM_CLK_DIV) |
+ CCM_DRAMCLK_CFG_RST | CCM_DRAMCLK_CFG_UPD);
+ mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+ setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+ setbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE);
+
+ para->rank = 2;
+ para->bus_width = 16;
+ mctl_set_cr(para);
+
+ /* Set dram master access priority */
+ writel(0x0000e00f, &mctl_ctl->clken); /* normal */
+
+ udelay(250);
+}
+
+unsigned long sunxi_dram_init(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ struct dram_para para = {
+ .cs1 = 0,
+ .bank = 1,
+ .rank = 1,
+ .rows = 15,
+ .bus_width = 16,
+ .page_size = 2048,
+ };
+
+#if defined(CONFIG_MACH_SUN8I_A83T)
+#if (CONFIG_DRAM_TYPE == 3) || (CONFIG_DRAM_TYPE == 7)
+ para.dram_type = CONFIG_DRAM_TYPE;
+#else
+#error Unsupported DRAM type, Please set DRAM type (3:DDR3, 7:LPDDR3)
+#endif
+#endif
+ setbits_le32(SUNXI_PRCM_BASE + 0x1e0, 0x1 << 8);
+
+ writel(0, (SUNXI_PRCM_BASE + 0x1e8));
+ udelay(10);
+
+ mctl_sys_init(¶);
+
+ if (mctl_channel_init(¶) != 0)
+ return 0;
+
+ auto_detect_dram_size(¶);
+
+ /* Enable master software clk */
+ writel(readl(&mctl_com->swonr) | 0x3ffff, &mctl_com->swonr);
+
+ /* Set DRAM ODT MAP */
+ if (para.rank == 2)
+ writel(0x00000303, &mctl_ctl->odtmap);
+ else
+ writel(0x00000201, &mctl_ctl->odtmap);
+
+ return para.page_size * (para.bus_width / 8) *
+ (1 << (para.bank + para.rank + para.rows));
+}
--- /dev/null
+/*
+ * sun8i H3 platform dram controller init
+ *
+ * (C) Copyright 2007-2015 Allwinner Technology Co.
+ * Jerry Wang <wangflord@allwinnertech.com>
+ * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dram.h>
+#include <linux/kconfig.h>
+
+struct dram_para {
+ u32 read_delays;
+ u32 write_delays;
+ u16 page_size;
+ u8 bus_width;
+ u8 dual_rank;
+ u8 row_bits;
+};
+
+static inline int ns_to_t(int nanoseconds)
+{
+ const unsigned int ctrl_freq = CONFIG_DRAM_CLK / 2;
+
+ return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000);
+}
+
+static u32 bin_to_mgray(int val)
+{
+ static const u8 lookup_table[32] = {
+ 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05,
+ 0x0c, 0x0d, 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1e, 0x1f, 0x1c, 0x1d,
+ 0x14, 0x15, 0x16, 0x17, 0x12, 0x13, 0x10, 0x11,
+ };
+
+ return lookup_table[clamp(val, 0, 31)];
+}
+
+static int mgray_to_bin(u32 val)
+{
+ static const u8 lookup_table[32] = {
+ 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05,
+ 0x0e, 0x0f, 0x0c, 0x0d, 0x08, 0x09, 0x0a, 0x0b,
+ 0x1e, 0x1f, 0x1c, 0x1d, 0x18, 0x19, 0x1a, 0x1b,
+ 0x10, 0x11, 0x12, 0x13, 0x16, 0x17, 0x14, 0x15,
+ };
+
+ return lookup_table[val & 0x1f];
+}
+
+static void mctl_phy_init(u32 val)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ writel(val | PIR_INIT, &mctl_ctl->pir);
+ mctl_await_completion(&mctl_ctl->pgsr[0], PGSR_INIT_DONE, 0x1);
+}
+
+static void mctl_dq_delay(u32 read, u32 write)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+ int i, j;
+ u32 val;
+
+ for (i = 0; i < 4; i++) {
+ val = DATX_IOCR_WRITE_DELAY((write >> (i * 4)) & 0xf) |
+ DATX_IOCR_READ_DELAY(((read >> (i * 4)) & 0xf) * 2);
+
+ for (j = DATX_IOCR_DQ(0); j <= DATX_IOCR_DM; j++)
+ writel(val, &mctl_ctl->datx[i].iocr[j]);
+ }
+
+ clrbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
+
+ for (i = 0; i < 4; i++) {
+ val = DATX_IOCR_WRITE_DELAY((write >> (16 + i * 4)) & 0xf) |
+ DATX_IOCR_READ_DELAY((read >> (16 + i * 4)) & 0xf);
+
+ writel(val, &mctl_ctl->datx[i].iocr[DATX_IOCR_DQS]);
+ writel(val, &mctl_ctl->datx[i].iocr[DATX_IOCR_DQSN]);
+ }
+
+ setbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
+
+ udelay(1);
+}
+
+static void mctl_set_master_priority(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+ /* enable bandwidth limit windows and set windows size 1us */
+ writel(0x00010190, &mctl_com->bwcr);
+
+ /* set cpu high priority */
+ writel(0x00000001, &mctl_com->mapr);
+
+ writel(0x0200000d, &mctl_com->mcr[0][0]);
+ writel(0x00800100, &mctl_com->mcr[0][1]);
+ writel(0x06000009, &mctl_com->mcr[1][0]);
+ writel(0x01000400, &mctl_com->mcr[1][1]);
+ writel(0x0200000d, &mctl_com->mcr[2][0]);
+ writel(0x00600100, &mctl_com->mcr[2][1]);
+ writel(0x0100000d, &mctl_com->mcr[3][0]);
+ writel(0x00200080, &mctl_com->mcr[3][1]);
+ writel(0x07000009, &mctl_com->mcr[4][0]);
+ writel(0x01000640, &mctl_com->mcr[4][1]);
+ writel(0x0100000d, &mctl_com->mcr[5][0]);
+ writel(0x00200080, &mctl_com->mcr[5][1]);
+ writel(0x01000009, &mctl_com->mcr[6][0]);
+ writel(0x00400080, &mctl_com->mcr[6][1]);
+ writel(0x0100000d, &mctl_com->mcr[7][0]);
+ writel(0x00400080, &mctl_com->mcr[7][1]);
+ writel(0x0100000d, &mctl_com->mcr[8][0]);
+ writel(0x00400080, &mctl_com->mcr[8][1]);
+ writel(0x04000009, &mctl_com->mcr[9][0]);
+ writel(0x00400100, &mctl_com->mcr[9][1]);
+ writel(0x2000030d, &mctl_com->mcr[10][0]);
+ writel(0x04001800, &mctl_com->mcr[10][1]);
+ writel(0x04000009, &mctl_com->mcr[11][0]);
+ writel(0x00400120, &mctl_com->mcr[11][1]);
+}
+
+static void mctl_set_timing_params(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ u8 tccd = 2;
+ u8 tfaw = ns_to_t(50);
+ u8 trrd = max(ns_to_t(10), 4);
+ u8 trcd = ns_to_t(15);
+ u8 trc = ns_to_t(53);
+ u8 txp = max(ns_to_t(8), 3);
+ u8 twtr = max(ns_to_t(8), 4);
+ u8 trtp = max(ns_to_t(8), 4);
+ u8 twr = max(ns_to_t(15), 3);
+ u8 trp = ns_to_t(15);
+ u8 tras = ns_to_t(38);
+ u16 trefi = ns_to_t(7800) / 32;
+ u16 trfc = ns_to_t(350);
+
+ u8 tmrw = 0;
+ u8 tmrd = 4;
+ u8 tmod = 12;
+ u8 tcke = 3;
+ u8 tcksrx = 5;
+ u8 tcksre = 5;
+ u8 tckesr = 4;
+ u8 trasmax = 24;
+
+ u8 tcl = 6; /* CL 12 */
+ u8 tcwl = 4; /* CWL 8 */
+ u8 t_rdata_en = 4;
+ u8 wr_latency = 2;
+
+ u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */
+ u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1; /* 360ns */
+ u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
+ u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
+
+ u8 twtp = tcwl + 2 + twr; /* WL + BL / 2 + tWR */
+ u8 twr2rd = tcwl + 2 + twtr; /* WL + BL / 2 + tWTR */
+ u8 trd2wr = tcl + 2 + 1 - tcwl; /* RL + BL / 2 + 2 - WL */
+
+ /* set mode register */
+ writel(0x1c70, &mctl_ctl->mr[0]); /* CL=11, WR=12 */
+ writel(0x40, &mctl_ctl->mr[1]);
+ writel(0x18, &mctl_ctl->mr[2]); /* CWL=8 */
+ writel(0x0, &mctl_ctl->mr[3]);
+
+ /* set DRAM timing */
+ writel(DRAMTMG0_TWTP(twtp) | DRAMTMG0_TFAW(tfaw) |
+ DRAMTMG0_TRAS_MAX(trasmax) | DRAMTMG0_TRAS(tras),
+ &mctl_ctl->dramtmg[0]);
+ writel(DRAMTMG1_TXP(txp) | DRAMTMG1_TRTP(trtp) | DRAMTMG1_TRC(trc),
+ &mctl_ctl->dramtmg[1]);
+ writel(DRAMTMG2_TCWL(tcwl) | DRAMTMG2_TCL(tcl) |
+ DRAMTMG2_TRD2WR(trd2wr) | DRAMTMG2_TWR2RD(twr2rd),
+ &mctl_ctl->dramtmg[2]);
+ writel(DRAMTMG3_TMRW(tmrw) | DRAMTMG3_TMRD(tmrd) | DRAMTMG3_TMOD(tmod),
+ &mctl_ctl->dramtmg[3]);
+ writel(DRAMTMG4_TRCD(trcd) | DRAMTMG4_TCCD(tccd) | DRAMTMG4_TRRD(trrd) |
+ DRAMTMG4_TRP(trp), &mctl_ctl->dramtmg[4]);
+ writel(DRAMTMG5_TCKSRX(tcksrx) | DRAMTMG5_TCKSRE(tcksre) |
+ DRAMTMG5_TCKESR(tckesr) | DRAMTMG5_TCKE(tcke),
+ &mctl_ctl->dramtmg[5]);
+
+ /* set two rank timing */
+ clrsetbits_le32(&mctl_ctl->dramtmg[8], (0xff << 8) | (0xff << 0),
+ (0x66 << 8) | (0x10 << 0));
+
+ /* set PHY interface timing, write latency and read latency configure */
+ writel((0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) |
+ (wr_latency << 0), &mctl_ctl->pitmg[0]);
+
+ /* set PHY timing, PTR0-2 use default */
+ writel(PTR3_TDINIT0(tdinit0) | PTR3_TDINIT1(tdinit1), &mctl_ctl->ptr[3]);
+ writel(PTR4_TDINIT2(tdinit2) | PTR4_TDINIT3(tdinit3), &mctl_ctl->ptr[4]);
+
+ /* set refresh timing */
+ writel(RFSHTMG_TREFI(trefi) | RFSHTMG_TRFC(trfc), &mctl_ctl->rfshtmg);
+}
+
+static void mctl_zq_calibration(struct dram_para *para)
+{
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ int i;
+ u16 zq_val[6];
+ u8 val;
+
+ writel(0x0a0a0a0a, &mctl_ctl->zqdr[2]);
+
+ for (i = 0; i < 6; i++) {
+ u8 zq = (CONFIG_DRAM_ZQ >> (i * 4)) & 0xf;
+
+ writel((zq << 20) | (zq << 16) | (zq << 12) |
+ (zq << 8) | (zq << 4) | (zq << 0),
+ &mctl_ctl->zqcr);
+
+ writel(PIR_CLRSR, &mctl_ctl->pir);
+ mctl_phy_init(PIR_ZCAL);
+
+ zq_val[i] = readl(&mctl_ctl->zqdr[0]) & 0xff;
+ writel(REPEAT_BYTE(zq_val[i]), &mctl_ctl->zqdr[2]);
+
+ writel(PIR_CLRSR, &mctl_ctl->pir);
+ mctl_phy_init(PIR_ZCAL);
+
+ val = readl(&mctl_ctl->zqdr[0]) >> 24;
+ zq_val[i] |= bin_to_mgray(mgray_to_bin(val) - 1) << 8;
+ }
+
+ writel((zq_val[1] << 16) | zq_val[0], &mctl_ctl->zqdr[0]);
+ writel((zq_val[3] << 16) | zq_val[2], &mctl_ctl->zqdr[1]);
+ writel((zq_val[5] << 16) | zq_val[4], &mctl_ctl->zqdr[2]);
+}
+
+static void mctl_set_cr(struct dram_para *para)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+ writel(MCTL_CR_BL8 | MCTL_CR_2T | MCTL_CR_DDR3 | MCTL_CR_INTERLEAVED |
+ MCTL_CR_EIGHT_BANKS | MCTL_CR_BUS_WIDTH(para->bus_width) |
+ (para->dual_rank ? MCTL_CR_DUAL_RANK : MCTL_CR_SINGLE_RANK) |
+ MCTL_CR_PAGE_SIZE(para->page_size) |
+ MCTL_CR_ROW_BITS(para->row_bits), &mctl_com->cr);
+}
+
+static void mctl_sys_init(struct dram_para *para)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ clrbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
+ clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+ clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+ clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+ clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
+ udelay(10);
+
+ clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
+ udelay(1000);
+
+ clock_set_pll5(CONFIG_DRAM_CLK * 2 * 1000000, false);
+ clrsetbits_le32(&ccm->dram_clk_cfg,
+ CCM_DRAMCLK_CFG_DIV_MASK | CCM_DRAMCLK_CFG_SRC_MASK,
+ CCM_DRAMCLK_CFG_DIV(1) | CCM_DRAMCLK_CFG_SRC_PLL5 |
+ CCM_DRAMCLK_CFG_UPD);
+ mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
+
+ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
+ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
+ setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
+ setbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
+
+ setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
+ udelay(10);
+
+ writel(0xc00e, &mctl_ctl->clken);
+ udelay(500);
+}
+
+static int mctl_channel_init(struct dram_para *para)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ unsigned int i;
+
+ mctl_set_cr(para);
+ mctl_set_timing_params(para);
+ mctl_set_master_priority();
+
+ /* setting VTC, default disable all VT */
+ clrbits_le32(&mctl_ctl->pgcr[0], (1 << 30) | 0x3f);
+ clrsetbits_le32(&mctl_ctl->pgcr[1], 1 << 24, 1 << 26);
+
+ /* increase DFI_PHY_UPD clock */
+ writel(PROTECT_MAGIC, &mctl_com->protect);
+ udelay(100);
+ clrsetbits_le32(&mctl_ctl->upd2, 0xfff << 16, 0x50 << 16);
+ writel(0x0, &mctl_com->protect);
+ udelay(100);
+
+ /* set dramc odt */
+ for (i = 0; i < 4; i++)
+ clrsetbits_le32(&mctl_ctl->datx[i].gcr, (0x3 << 4) |
+ (0x1 << 1) | (0x3 << 2) | (0x3 << 12) |
+ (0x3 << 14),
+ IS_ENABLED(CONFIG_DRAM_ODT_EN) ? 0x0 : 0x2);
+
+ /* AC PDR should always ON */
+ setbits_le32(&mctl_ctl->aciocr, 0x1 << 1);
+
+ /* set DQS auto gating PD mode */
+ setbits_le32(&mctl_ctl->pgcr[2], 0x3 << 6);
+
+ /* dx ddr_clk & hdr_clk dynamic mode */
+ clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
+
+ /* dphy & aphy phase select 270 degree */
+ clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
+ (0x1 << 10) | (0x2 << 8));
+
+ /* set half DQ */
+ if (para->bus_width != 32) {
+ writel(0x0, &mctl_ctl->datx[2].gcr);
+ writel(0x0, &mctl_ctl->datx[3].gcr);
+ }
+
+ /* data training configuration */
+ clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24,
+ (para->dual_rank ? 0x3 : 0x1) << 24);
+
+
+ if (para->read_delays || para->write_delays) {
+ mctl_dq_delay(para->read_delays, para->write_delays);
+ udelay(50);
+ }
+
+ mctl_zq_calibration(para);
+
+ mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST | PIR_DRAMRST |
+ PIR_DRAMINIT | PIR_QSGATE);
+
+ /* detect ranks and bus width */
+ if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20)) {
+ /* only one rank */
+ if (((readl(&mctl_ctl->datx[0].gsr[0]) >> 24) & 0x2) ||
+ ((readl(&mctl_ctl->datx[1].gsr[0]) >> 24) & 0x2)) {
+ clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24, 0x1 << 24);
+ para->dual_rank = 0;
+ }
+
+ /* only half DQ width */
+ if (((readl(&mctl_ctl->datx[2].gsr[0]) >> 24) & 0x1) ||
+ ((readl(&mctl_ctl->datx[3].gsr[0]) >> 24) & 0x1)) {
+ writel(0x0, &mctl_ctl->datx[2].gcr);
+ writel(0x0, &mctl_ctl->datx[3].gcr);
+ para->bus_width = 16;
+ }
+
+ mctl_set_cr(para);
+ udelay(20);
+
+ /* re-train */
+ mctl_phy_init(PIR_QSGATE);
+ if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20))
+ return 1;
+ }
+
+ /* check the dramc status */
+ mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
+
+ /* liuke added for refresh debug */
+ setbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31);
+ udelay(10);
+ clrbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31);
+ udelay(10);
+
+ /* set PGCR3, CKE polarity */
+ writel(0x00aa0060, &mctl_ctl->pgcr[3]);
+
+ /* power down zq calibration module for power save */
+ setbits_le32(&mctl_ctl->zqcr, ZQCR_PWRDOWN);
+
+ /* enable master access */
+ writel(0xffffffff, &mctl_com->maer);
+
+ return 0;
+}
+
+static void mctl_auto_detect_dram_size(struct dram_para *para)
+{
+ /* detect row address bits */
+ para->page_size = 512;
+ para->row_bits = 16;
+ mctl_set_cr(para);
+
+ for (para->row_bits = 11; para->row_bits < 16; para->row_bits++)
+ if (mctl_mem_matches((1 << (para->row_bits + 3)) * para->page_size))
+ break;
+
+ /* detect page size */
+ para->page_size = 8192;
+ mctl_set_cr(para);
+
+ for (para->page_size = 512; para->page_size < 8192; para->page_size *= 2)
+ if (mctl_mem_matches(para->page_size))
+ break;
+}
+
+unsigned long sunxi_dram_init(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+ struct sunxi_mctl_ctl_reg * const mctl_ctl =
+ (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+ struct dram_para para = {
+ .read_delays = 0x00007979, /* dram_tpr12 */
+ .write_delays = 0x6aaa0000, /* dram_tpr11 */
+ .dual_rank = 0,
+ .bus_width = 32,
+ .row_bits = 15,
+ .page_size = 4096,
+ };
+
+ mctl_sys_init(¶);
+ if (mctl_channel_init(¶))
+ return 0;
+
+ if (para.dual_rank)
+ writel(0x00000303, &mctl_ctl->odtmap);
+ else
+ writel(0x00000201, &mctl_ctl->odtmap);
+ udelay(1);
+
+ /* odt delay */
+ writel(0x0c000400, &mctl_ctl->odtcfg);
+
+ /* clear credit value */
+ setbits_le32(&mctl_com->cccr, 1 << 31);
+ udelay(10);
+
+ mctl_auto_detect_dram_size(¶);
+ mctl_set_cr(¶);
+
+ return (1 << (para.row_bits + 3)) * para.page_size *
+ (para.dual_rank ? 2 : 1);
+}
--- /dev/null
+/*
+ * Sunxi A31 Power Management Unit
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://linux-sunxi.org
+ *
+ * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work
+ *
+ * (C) Copyright 2006-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/p2wi.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+void p2wi_init(void)
+{
+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
+
+ /* Enable p2wi and PIO clk, and de-assert their resets */
+ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI);
+
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA);
+
+ /* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */
+ writel(P2WI_CTRL_RESET, &p2wi->ctrl);
+ sdelay(0x100);
+ writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8),
+ &p2wi->cc);
+}
+
+int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data)
+{
+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
+ unsigned long tmo = timer_get_us() + 1000000;
+
+ writel(P2WI_PM_DEV_ADDR(slave_addr) |
+ P2WI_PM_CTRL_ADDR(ctrl_reg) |
+ P2WI_PM_INIT_DATA(init_data) |
+ P2WI_PM_INIT_SEND,
+ &p2wi->pm);
+
+ while ((readl(&p2wi->pm) & P2WI_PM_INIT_SEND)) {
+ if (timer_get_us() > tmo)
+ return -ETIME;
+ }
+
+ return 0;
+}
+
+static int p2wi_await_trans(void)
+{
+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
+ unsigned long tmo = timer_get_us() + 1000000;
+ int ret;
+ u8 reg;
+
+ while (1) {
+ reg = readl(&p2wi->status);
+ if (reg & P2WI_STAT_TRANS_ERR) {
+ ret = -EIO;
+ break;
+ }
+ if (reg & P2WI_STAT_TRANS_DONE) {
+ ret = 0;
+ break;
+ }
+ if (timer_get_us() > tmo) {
+ ret = -ETIME;
+ break;
+ }
+ }
+ writel(reg, &p2wi->status); /* Clear status bits */
+ return ret;
+}
+
+int p2wi_read(const u8 addr, u8 *data)
+{
+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
+ int ret;
+
+ writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
+ writel(P2WI_DATA_NUM_BYTES(1) |
+ P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes);
+ writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
+ writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
+
+ ret = p2wi_await_trans();
+
+ *data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK;
+ return ret;
+}
+
+int p2wi_write(const u8 addr, u8 data)
+{
+ struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
+
+ writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
+ writel(P2WI_DATA_BYTE_1(data), &p2wi->data0);
+ writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes);
+ writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
+ writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
+
+ return p2wi_await_trans();
+}
--- /dev/null
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+
+void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val)
+{
+ u32 index = GPIO_CFG_INDEX(bank_offset);
+ u32 offset = GPIO_CFG_OFFSET(bank_offset);
+
+ clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset);
+}
+
+void sunxi_gpio_set_cfgpin(u32 pin, u32 val)
+{
+ u32 bank = GPIO_BANK(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ sunxi_gpio_set_cfgbank(pio, pin, val);
+}
+
+int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset)
+{
+ u32 index = GPIO_CFG_INDEX(bank_offset);
+ u32 offset = GPIO_CFG_OFFSET(bank_offset);
+ u32 cfg;
+
+ cfg = readl(&pio->cfg[0] + index);
+ cfg >>= offset;
+
+ return cfg & 0xf;
+}
+
+int sunxi_gpio_get_cfgpin(u32 pin)
+{
+ u32 bank = GPIO_BANK(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ return sunxi_gpio_get_cfgbank(pio, pin);
+}
+
+int sunxi_gpio_set_drv(u32 pin, u32 val)
+{
+ u32 bank = GPIO_BANK(pin);
+ u32 index = GPIO_DRV_INDEX(pin);
+ u32 offset = GPIO_DRV_OFFSET(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ clrsetbits_le32(&pio->drv[0] + index, 0x3 << offset, val << offset);
+
+ return 0;
+}
+
+int sunxi_gpio_set_pull(u32 pin, u32 val)
+{
+ u32 bank = GPIO_BANK(pin);
+ u32 index = GPIO_PULL_INDEX(pin);
+ u32 offset = GPIO_PULL_OFFSET(pin);
+ struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
+
+ clrsetbits_le32(&pio->pull[0] + index, 0x3 << offset, val << offset);
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Sunxi PMIC bus access helpers
+ *
+ * The axp152 & axp209 use an i2c bus, the axp221 uses the p2wi bus and the
+ * axp223 uses the rsb bus, these functions abstract this.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/p2wi.h>
+#include <asm/arch/rsb.h>
+#include <i2c.h>
+#include <asm/arch/pmic_bus.h>
+
+#define AXP152_I2C_ADDR 0x30
+
+#define AXP209_I2C_ADDR 0x34
+
+#define AXP221_CHIP_ADDR 0x68
+#define AXP221_CTRL_ADDR 0x3e
+#define AXP221_INIT_DATA 0x3e
+
+/* AXP818 device and runtime addresses are same as AXP223 */
+#define AXP223_DEVICE_ADDR 0x3a3
+#define AXP223_RUNTIME_ADDR 0x2d
+
+int pmic_bus_init(void)
+{
+ /* This cannot be 0 because it is used in SPL before BSS is ready */
+ static int needs_init = 1;
+ __maybe_unused int ret;
+
+ if (!needs_init)
+ return 0;
+
+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+# ifdef CONFIG_MACH_SUN6I
+ p2wi_init();
+ ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
+ AXP221_INIT_DATA);
+# else
+ ret = rsb_init();
+ if (ret)
+ return ret;
+
+ ret = rsb_set_device_address(AXP223_DEVICE_ADDR, AXP223_RUNTIME_ADDR);
+# endif
+ if (ret)
+ return ret;
+#endif
+
+ needs_init = 0;
+ return 0;
+}
+
+int pmic_bus_read(u8 reg, u8 *data)
+{
+#ifdef CONFIG_AXP152_POWER
+ return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1);
+#elif defined CONFIG_AXP209_POWER
+ return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
+#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+# ifdef CONFIG_MACH_SUN6I
+ return p2wi_read(reg, data);
+# else
+ return rsb_read(AXP223_RUNTIME_ADDR, reg, data);
+# endif
+#endif
+}
+
+int pmic_bus_write(u8 reg, u8 data)
+{
+#ifdef CONFIG_AXP152_POWER
+ return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1);
+#elif defined CONFIG_AXP209_POWER
+ return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
+#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+# ifdef CONFIG_MACH_SUN6I
+ return p2wi_write(reg, data);
+# else
+ return rsb_write(AXP223_RUNTIME_ADDR, reg, data);
+# endif
+#endif
+}
+
+int pmic_bus_setbits(u8 reg, u8 bits)
+{
+ int ret;
+ u8 val;
+
+ ret = pmic_bus_read(reg, &val);
+ if (ret)
+ return ret;
+
+ val |= bits;
+ return pmic_bus_write(reg, val);
+}
+
+int pmic_bus_clrbits(u8 reg, u8 bits)
+{
+ int ret;
+ u8 val;
+
+ ret = pmic_bus_read(reg, &val);
+ if (ret)
+ return ret;
+
+ val &= ~bits;
+ return pmic_bus_write(reg, val);
+}
--- /dev/null
+/*
+ * Sunxi A31 Power Management Unit
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://linux-sunxi.org
+ *
+ * Based on sun6i sources and earlier U-Boot Allwinner A10 SPL work
+ *
+ * (C) Copyright 2006-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+/* APB0 clock gate and reset bit offsets are the same. */
+void prcm_apb0_enable(u32 flags)
+{
+ struct sunxi_prcm_reg *prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+ /* open the clock for module */
+ setbits_le32(&prcm->apb0_gate, flags);
+
+ /* deassert reset for module */
+ setbits_le32(&prcm->apb0_reset, flags);
+}
+
+void prcm_apb0_disable(u32 flags)
+{
+ struct sunxi_prcm_reg *prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+ /* assert reset for module */
+ clrbits_le32(&prcm->apb0_reset, flags);
+
+ /* close the clock for module */
+ clrbits_le32(&prcm->apb0_gate, flags);
+}
--- /dev/null
+/*
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on allwinner u-boot sources rsb code which is:
+ * (C) Copyright 2007-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * lixiang <lixiang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/rsb.h>
+
+static int rsb_set_device_mode(void);
+
+static void rsb_cfg_io(void)
+{
+#ifdef CONFIG_MACH_SUN8I
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_GPL_R_RSB);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_GPL_R_RSB);
+ sunxi_gpio_set_pull(SUNXI_GPL(0), 1);
+ sunxi_gpio_set_pull(SUNXI_GPL(1), 1);
+ sunxi_gpio_set_drv(SUNXI_GPL(0), 2);
+ sunxi_gpio_set_drv(SUNXI_GPL(1), 2);
+#elif defined CONFIG_MACH_SUN9I
+ sunxi_gpio_set_cfgpin(SUNXI_GPN(0), SUN9I_GPN_R_RSB);
+ sunxi_gpio_set_cfgpin(SUNXI_GPN(1), SUN9I_GPN_R_RSB);
+ sunxi_gpio_set_pull(SUNXI_GPN(0), 1);
+ sunxi_gpio_set_pull(SUNXI_GPN(1), 1);
+ sunxi_gpio_set_drv(SUNXI_GPN(0), 2);
+ sunxi_gpio_set_drv(SUNXI_GPN(1), 2);
+#else
+#error unsupported MACH_SUNXI
+#endif
+}
+
+static void rsb_set_clk(void)
+{
+ struct sunxi_rsb_reg * const rsb =
+ (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+ u32 div = 0;
+ u32 cd_odly = 0;
+
+ /* Source is Hosc24M, set RSB clk to 3Mhz */
+ div = 24000000 / 3000000 / 2 - 1;
+ cd_odly = div >> 1;
+ if (!cd_odly)
+ cd_odly = 1;
+
+ writel((cd_odly << 8) | div, &rsb->ccr);
+}
+
+int rsb_init(void)
+{
+ struct sunxi_rsb_reg * const rsb =
+ (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+ /* Enable RSB and PIO clk, and de-assert their resets */
+ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_RSB);
+
+ /* Setup external pins */
+ rsb_cfg_io();
+
+ writel(RSB_CTRL_SOFT_RST, &rsb->ctrl);
+ rsb_set_clk();
+
+ return rsb_set_device_mode();
+}
+
+static int rsb_await_trans(void)
+{
+ struct sunxi_rsb_reg * const rsb =
+ (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+ unsigned long tmo = timer_get_us() + 1000000;
+ u32 stat;
+ int ret;
+
+ while (1) {
+ stat = readl(&rsb->stat);
+ if (stat & RSB_STAT_LBSY_INT) {
+ ret = -EBUSY;
+ break;
+ }
+ if (stat & RSB_STAT_TERR_INT) {
+ ret = -EIO;
+ break;
+ }
+ if (stat & RSB_STAT_TOVER_INT) {
+ ret = 0;
+ break;
+ }
+ if (timer_get_us() > tmo) {
+ ret = -ETIME;
+ break;
+ }
+ }
+ writel(stat, &rsb->stat); /* Clear status bits */
+
+ return ret;
+}
+
+static int rsb_set_device_mode(void)
+{
+ struct sunxi_rsb_reg * const rsb =
+ (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+ unsigned long tmo = timer_get_us() + 1000000;
+
+ writel(RSB_DMCR_DEVICE_MODE_START | RSB_DMCR_DEVICE_MODE_DATA,
+ &rsb->dmcr);
+
+ while (readl(&rsb->dmcr) & RSB_DMCR_DEVICE_MODE_START) {
+ if (timer_get_us() > tmo)
+ return -ETIME;
+ }
+
+ return rsb_await_trans();
+}
+
+static int rsb_do_trans(void)
+{
+ struct sunxi_rsb_reg * const rsb =
+ (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+ setbits_le32(&rsb->ctrl, RSB_CTRL_START_TRANS);
+ return rsb_await_trans();
+}
+
+int rsb_set_device_address(u16 device_addr, u16 runtime_addr)
+{
+ struct sunxi_rsb_reg * const rsb =
+ (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+ writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_addr) |
+ RSB_DEVADDR_DEVICE_ADDR(device_addr), &rsb->devaddr);
+ writel(RSB_CMD_SET_RTSADDR, &rsb->cmd);
+
+ return rsb_do_trans();
+}
+
+int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data)
+{
+ struct sunxi_rsb_reg * const rsb =
+ (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+ writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
+ writel(reg_addr, &rsb->addr);
+ writel(data, &rsb->data);
+ writel(RSB_CMD_BYTE_WRITE, &rsb->cmd);
+
+ return rsb_do_trans();
+}
+
+int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data)
+{
+ struct sunxi_rsb_reg * const rsb =
+ (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+ int ret;
+
+ writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
+ writel(reg_addr, &rsb->addr);
+ writel(RSB_CMD_BYTE_READ, &rsb->cmd);
+
+ ret = rsb_do_trans();
+ if (ret)
+ return ret;
+
+ *data = readl(&rsb->data) & 0xff;
+
+ return 0;
+}
--- /dev/null
+/*
+ * Sunxi usb-phy code
+ *
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/usb_phy.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <errno.h>
+
+#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
+#ifdef CONFIG_MACH_SUN8I_A33
+#define SUNXI_USB_CSR 0x410
+#else
+#define SUNXI_USB_CSR 0x404
+#endif
+#define SUNXI_USB_PASSBY_EN 1
+
+#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
+#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
+#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
+#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
+
+#define REG_PHY_UNK_H3 0x420
+#define REG_PMU_UNK_H3 0x810
+
+/* A83T specific control bits for PHY0 */
+#define SUNXI_PHY_CTL_VBUSVLDEXT BIT(5)
+#define SUNXI_PHY_CTL_SIDDQ BIT(3)
+
+/* A83T HSIC specific bits */
+#define SUNXI_EHCI_HS_FORCE BIT(20)
+#define SUNXI_EHCI_CONNECT_DET BIT(17)
+#define SUNXI_EHCI_CONNECT_INT BIT(16)
+#define SUNXI_EHCI_HSIC BIT(1)
+
+static struct sunxi_usb_phy {
+ int usb_rst_mask;
+ int gpio_vbus;
+ int gpio_vbus_det;
+ int gpio_id_det;
+ int id;
+ int init_count;
+ int power_on_count;
+ ulong base;
+} sunxi_usb_phy[] = {
+ {
+ .usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
+ .id = 0,
+ .base = SUNXI_USB0_BASE,
+ },
+ {
+ .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
+ .id = 1,
+ .base = SUNXI_USB1_BASE,
+ },
+#if CONFIG_SUNXI_USB_PHYS >= 3
+ {
+#ifdef CONFIG_MACH_SUN8I_A83T
+ .usb_rst_mask = CCM_USB_CTRL_HSIC_RST | CCM_USB_CTRL_HSIC_CLK |
+ CCM_USB_CTRL_12M_CLK,
+#else
+ .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
+#endif
+ .id = 2,
+ .base = SUNXI_USB2_BASE,
+ },
+#endif
+#if CONFIG_SUNXI_USB_PHYS >= 4
+ {
+ .usb_rst_mask = CCM_USB_CTRL_PHY3_RST | CCM_USB_CTRL_PHY3_CLK,
+ .id = 3,
+ .base = SUNXI_USB3_BASE,
+ }
+#endif
+};
+
+static int get_vbus_gpio(int index)
+{
+ switch (index) {
+ case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
+ case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
+ case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
+ case 3: return sunxi_name_to_gpio(CONFIG_USB3_VBUS_PIN);
+ }
+ return -EINVAL;
+}
+
+static int get_vbus_detect_gpio(int index)
+{
+ switch (index) {
+ case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
+ }
+ return -EINVAL;
+}
+
+static int get_id_detect_gpio(int index)
+{
+ switch (index) {
+ case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET);
+ }
+ return -EINVAL;
+}
+
+__maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
+ int data, int len)
+{
+ int j = 0, usbc_bit = 0;
+ void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
+
+#ifdef CONFIG_MACH_SUN8I_A33
+ /* CSR needs to be explicitly initialized to 0 on A33 */
+ writel(0, dest);
+#endif
+
+ usbc_bit = 1 << (phy->id * 2);
+ for (j = 0; j < len; j++) {
+ /* set the bit address to be written */
+ clrbits_le32(dest, 0xff << 8);
+ setbits_le32(dest, (addr + j) << 8);
+
+ clrbits_le32(dest, usbc_bit);
+ /* set data bit */
+ if (data & 0x1)
+ setbits_le32(dest, 1 << 7);
+ else
+ clrbits_le32(dest, 1 << 7);
+
+ setbits_le32(dest, usbc_bit);
+
+ clrbits_le32(dest, usbc_bit);
+
+ data >>= 1;
+ }
+}
+
+#if defined CONFIG_MACH_SUN8I_H3
+static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
+{
+ if (phy->id == 0)
+ clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
+
+ clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02);
+}
+#elif defined CONFIG_MACH_SUN8I_A83T
+static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
+{
+}
+#else
+static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
+{
+ /* The following comments are machine
+ * translated from Chinese, you have been warned!
+ */
+
+ /* Regulation 45 ohms */
+ if (phy->id == 0)
+ usb_phy_write(phy, 0x0c, 0x01, 1);
+
+ /* adjust PHY's magnitude and rate */
+ usb_phy_write(phy, 0x20, 0x14, 5);
+
+ /* threshold adjustment disconnect */
+#if defined CONFIG_MACH_SUN5I || defined CONFIG_MACH_SUN7I
+ usb_phy_write(phy, 0x2a, 2, 2);
+#else
+ usb_phy_write(phy, 0x2a, 3, 2);
+#endif
+
+ return;
+}
+#endif
+
+static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
+{
+ unsigned long bits = 0;
+ void *addr;
+
+ addr = (void *)phy->base + SUNXI_USB_PMU_IRQ_ENABLE;
+
+ bits = SUNXI_EHCI_AHB_ICHR8_EN |
+ SUNXI_EHCI_AHB_INCR4_BURST_EN |
+ SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
+ SUNXI_EHCI_ULPI_BYPASS_EN;
+
+#ifdef CONFIG_MACH_SUN8I_A83T
+ if (phy->id == 2)
+ bits |= SUNXI_EHCI_HS_FORCE |
+ SUNXI_EHCI_CONNECT_INT |
+ SUNXI_EHCI_HSIC;
+#endif
+
+ if (enable)
+ setbits_le32(addr, bits);
+ else
+ clrbits_le32(addr, bits);
+
+ return;
+}
+
+void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
+{
+#ifndef CONFIG_MACH_SUN8I_A83T
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+ usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
+#endif
+}
+
+void sunxi_usb_phy_init(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ phy->init_count++;
+ if (phy->init_count != 1)
+ return;
+
+ setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
+
+ sunxi_usb_phy_config(phy);
+
+ if (phy->id != 0)
+ sunxi_usb_phy_passby(phy, SUNXI_USB_PASSBY_EN);
+
+#ifdef CONFIG_MACH_SUN8I_A83T
+ if (phy->id == 0) {
+ setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
+ SUNXI_PHY_CTL_VBUSVLDEXT);
+ clrbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
+ SUNXI_PHY_CTL_SIDDQ);
+ }
+#endif
+}
+
+void sunxi_usb_phy_exit(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ phy->init_count--;
+ if (phy->init_count != 0)
+ return;
+
+ if (phy->id != 0)
+ sunxi_usb_phy_passby(phy, !SUNXI_USB_PASSBY_EN);
+
+#ifdef CONFIG_MACH_SUN8I_A83T
+ if (phy->id == 0) {
+ setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
+ SUNXI_PHY_CTL_SIDDQ);
+ }
+#endif
+
+ clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
+}
+
+void sunxi_usb_phy_power_on(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+ phy->power_on_count++;
+ if (phy->power_on_count != 1)
+ return;
+
+ if (phy->gpio_vbus >= 0)
+ gpio_set_value(phy->gpio_vbus, 1);
+}
+
+void sunxi_usb_phy_power_off(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+ phy->power_on_count--;
+ if (phy->power_on_count != 0)
+ return;
+
+ if (phy->gpio_vbus >= 0)
+ gpio_set_value(phy->gpio_vbus, 0);
+}
+
+int sunxi_usb_phy_power_is_on(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+ return phy->power_on_count > 0;
+}
+
+int sunxi_usb_phy_vbus_detect(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+ int err, retries = 3;
+
+ if (phy->gpio_vbus_det < 0)
+ return phy->gpio_vbus_det;
+
+ err = gpio_get_value(phy->gpio_vbus_det);
+ /*
+ * Vbus may have been provided by the board and just been turned of
+ * some milliseconds ago on reset, what we're measuring then is a
+ * residual charge on Vbus, sleep a bit and try again.
+ */
+ while (err > 0 && retries--) {
+ mdelay(100);
+ err = gpio_get_value(phy->gpio_vbus_det);
+ }
+
+ return err;
+}
+
+int sunxi_usb_phy_id_detect(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+ if (phy->gpio_id_det < 0)
+ return phy->gpio_id_det;
+
+ return gpio_get_value(phy->gpio_id_det);
+}
+
+int sunxi_usb_phy_probe(void)
+{
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_usb_phy *phy;
+ int i, ret = 0;
+
+ for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
+ phy = &sunxi_usb_phy[i];
+
+ phy->gpio_vbus = get_vbus_gpio(i);
+ if (phy->gpio_vbus >= 0) {
+ ret = gpio_request(phy->gpio_vbus, "usb_vbus");
+ if (ret)
+ return ret;
+ ret = gpio_direction_output(phy->gpio_vbus, 0);
+ if (ret)
+ return ret;
+ }
+
+ phy->gpio_vbus_det = get_vbus_detect_gpio(i);
+ if (phy->gpio_vbus_det >= 0) {
+ ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
+ if (ret)
+ return ret;
+ ret = gpio_direction_input(phy->gpio_vbus_det);
+ if (ret)
+ return ret;
+ }
+
+ phy->gpio_id_det = get_id_detect_gpio(i);
+ if (phy->gpio_id_det >= 0) {
+ ret = gpio_request(phy->gpio_id_det, "usb_id_det");
+ if (ret)
+ return ret;
+ ret = gpio_direction_input(phy->gpio_id_det);
+ if (ret)
+ return ret;
+ sunxi_gpio_set_pull(phy->gpio_id_det,
+ SUNXI_GPIO_PULL_UP);
+ }
+ }
+
+ setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
+
+ return 0;
+}
+
+int sunxi_usb_phy_remove(void)
+{
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_usb_phy *phy;
+ int i;
+
+ clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
+
+ for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
+ phy = &sunxi_usb_phy[i];
+
+ if (phy->gpio_vbus >= 0)
+ gpio_free(phy->gpio_vbus);
+
+ if (phy->gpio_vbus_det >= 0)
+ gpio_free(phy->gpio_vbus_det);
+
+ if (phy->gpio_id_det >= 0)
+ gpio_free(phy->gpio_id_det);
+ }
+
+ return 0;
+}
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+config MACH_SUN50I
+ bool "sun50i (Allwinner A64)"
+ select ARM64
+ select SUNXI_GEN_SUN6I
+
config MACH_SUN8I_A83T
bool "sun8i (Allwinner A83T)"
select CPU_V7
endif
config SYS_CLK_FREQ
+ default 816000000 if MACH_SUN50I
default 912000000 if MACH_SUN7I
default 1008000000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
default "sun7i" if MACH_SUN7I
default "sun8i" if MACH_SUN8I
default "sun9i" if MACH_SUN9I
+ default "sun50i" if MACH_SUN50I
config SYS_BOARD
default "sunxi"
Set the GMAC Transmit Clock Delay Chain value.
config SPL_STACK_R_ADDR
- default 0x4fe00000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I
+ default 0x4fe00000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I || MACH_SUN50I
default 0x2fe00000 if MACH_SUN9I
endif
F: configs/q8_a33_tablet_1024x600_defconfig
F: include/configs/sun9i.h
F: configs/Merrii_A80_Optimus_defconfig
+F: include/configs/sun50i.h
+F: configs/pine64_plus_defconfig
A20-OLIMEX-SOM-EVB BOARD
M: Marcus Cooper <codekipper@gmail.com>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/usb_phy.h>
+#ifndef CONFIG_ARM64
+#include <asm/armv7.h>
+#endif
#include <asm/gpio.h>
#include <asm/io.h>
#include <nand.h>
/* add board specific code here */
int board_init(void)
{
- int id_pfr1, ret;
+ __maybe_unused int id_pfr1, ret;
gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100);
+#ifndef CONFIG_ARM64
asm volatile("mrc p15, 0, %0, c0, c1, 1" : "=r"(id_pfr1));
debug("id_pfr1: 0x%08x\n", id_pfr1);
/* Generic Timer Extension available? */
- if ((id_pfr1 >> 16) & 0xf) {
+ if ((id_pfr1 >> CPUID_ARM_GENTIMER_SHIFT) & 0xf) {
+ uint32_t freq;
+
debug("Setting CNTFRQ\n");
- /* CNTFRQ == 24 MHz */
- asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r"(24000000));
+
+ /*
+ * CNTFRQ is a secure register, so we will crash if we try to
+ * write this from the non-secure world (read is OK, though).
+ * In case some bootcode has already set the correct value,
+ * we avoid the risk of writing to it.
+ */
+ asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r"(freq));
+ if (freq != CONFIG_TIMER_CLK_FREQ) {
+ debug("arch timer frequency is %d Hz, should be %d, fixing ...\n",
+ freq, CONFIG_TIMER_CLK_FREQ);
+#ifdef CONFIG_NON_SECURE
+ printf("arch timer frequency is wrong, but cannot adjust it\n");
+#else
+ asm volatile("mcr p15, 0, %0, c14, c0, 0"
+ : : "r"(CONFIG_TIMER_CLK_FREQ));
+#endif
+ }
}
+#endif /* !CONFIG_ARM64 */
ret = axp_gpio_init();
if (ret)
return 0;
}
+#ifdef CONFIG_MACH_SUN50I
+void dram_init_banksize(void)
+{
+ /* We need to reserve the first 16MB of RAM for ATF */
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE + (16 * 1024 * 1024);
+ gd->bd->bi_dram[0].size = get_effective_memsize() - (16 * 1024 * 1024);
+}
+#endif
+
#if defined(CONFIG_NAND_SUNXI) && defined(CONFIG_SPL_BUILD)
static void nand_pinmux_setup(void)
{
sunxi_gpio_set_pull(SUNXI_GPC(24), SUNXI_GPIO_PULL_UP);
sunxi_gpio_set_drv(SUNXI_GPC(24), 2);
}
-#elif defined(CONFIG_MACH_SUN8I)
+#elif defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN50I)
/* SDC2: PC5-PC6, PC8-PC16 */
for (pin = SUNXI_GPC(5); pin <= SUNXI_GPC(6); pin++) {
sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SDC2);
power_failed |= axp_set_eldo(2, CONFIG_AXP_ELDO2_VOLT);
power_failed |= axp_set_eldo(3, CONFIG_AXP_ELDO3_VOLT);
#endif
+
+#ifdef CONFIG_AXP818_POWER
+ power_failed |= axp_set_fldo(1, CONFIG_AXP_FLDO1_VOLT);
+ power_failed |= axp_set_fldo(2, CONFIG_AXP_FLDO2_VOLT);
+ power_failed |= axp_set_fldo(3, CONFIG_AXP_FLDO3_VOLT);
+#endif
#endif
printf("DRAM:");
ramsize = sunxi_dram_init();
*/
static void parse_spl_header(const uint32_t spl_addr)
{
- struct boot_file_head *spl = (void *)spl_addr;
+ struct boot_file_head *spl = (void *)(ulong)spl_addr;
if (memcmp(spl->spl_signature, SPL_SIGNATURE, 3) == 0) {
uint8_t spl_header_version = spl->spl_signature[3];
if (spl_header_version == SPL_HEADER_VERSION) {
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
+CONFIG_RTL8211X_PHY_FORCE_MASTER=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
+CONFIG_RTL8211X_PHY_FORCE_MASTER=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
CONFIG_DRAM_ODT_EN=y
CONFIG_MMC0_CD_PIN="PF6"
CONFIG_I2C0_ENABLE=y
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH11"
+CONFIG_USB1_VBUS_PIN="PD29"
+CONFIG_USB2_VBUS_PIN="PL6"
CONFIG_AXP_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPD(20)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
CONFIG_AXP_DLDO3_VOLT=2500
CONFIG_AXP_DLDO4_VOLT=3300
+CONFIG_AXP_FLDO1_VOLT=1200
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_HOST=y
CONFIG_DRAM_CLK=480
CONFIG_DRAM_ZQ=15355
CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC0_CD_PIN="PF6"
+CONFIG_USB0_VBUS_PIN="PL5"
+CONFIG_USB1_VBUS_PIN="PL6"
CONFIG_AXP_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-allwinner-h8homlet-v2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_AXP_DCDC1_VOLT=3000
-CONFIG_AXP_DCDC5_VOLT=1500
+CONFIG_AXP_DLDO4_VOLT=3300
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_HOST=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN50I=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881915
+# CONFIG_VIDEO is not set
+CONFIG_DEFAULT_DEVICE_TREE="pine64_plus"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
u8 reg;
switch (pin) {
-#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */
+#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
+ /* Only available on later PMICs */
case SUNXI_GPIO_AXP0_VBUS_ENABLE:
- ret = pmic_bus_clrbits(AXP221_MISC_CTRL,
- AXP221_MISC_CTRL_N_VBUSEN_FUNC);
+ ret = pmic_bus_clrbits(AXP_MISC_CTRL,
+ AXP_MISC_CTRL_N_VBUSEN_FUNC);
if (ret)
return ret;
mask = AXP_POWER_STATUS_VBUS_PRESENT;
break;
#endif
-#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */
+#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
+ /* Only available on later PMICs */
case SUNXI_GPIO_AXP0_VBUS_ENABLE:
- ret = pmic_bus_read(AXP221_VBUS_IPSOUT, &val);
- mask = AXP221_VBUS_IPSOUT_DRIVEBUS;
+ ret = pmic_bus_read(AXP_VBUS_IPSOUT, &val);
+ mask = AXP_VBUS_IPSOUT_DRIVEBUS;
break;
#endif
default:
u8 reg;
switch (pin) {
-#ifdef CONFIG_AXP221_POWER /* Only available on axp221/axp223 */
+#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
+ /* Only available on later PMICs */
case SUNXI_GPIO_AXP0_VBUS_ENABLE:
if (val)
- return pmic_bus_setbits(AXP221_VBUS_IPSOUT,
- AXP221_VBUS_IPSOUT_DRIVEBUS);
+ return pmic_bus_setbits(AXP_VBUS_IPSOUT,
+ AXP_VBUS_IPSOUT_DRIVEBUS);
else
- return pmic_bus_clrbits(AXP221_VBUS_IPSOUT,
- AXP221_VBUS_IPSOUT_DRIVEBUS);
+ return pmic_bus_clrbits(AXP_VBUS_IPSOUT,
+ AXP_VBUS_IPSOUT_DRIVEBUS);
#endif
default:
reg = axp_get_gpio_ctrl_reg(pin);
cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC;
if (data) {
- if ((u32) data->dest & 0x3) {
+ if ((u32)(long)data->dest & 0x3) {
error = -1;
goto out;
}
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
cfg->host_caps = MMC_MODE_4BIT;
+#ifdef CONFIG_MACH_SUN50I
+ if (sdc_no == 2)
+ cfg->host_caps = MMC_MODE_8BIT;
+#endif
cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
help
Enable Ethernet PHY (physical media interface) support.
+config RTL8211X_PHY_FORCE_MASTER
+ bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
+ depends on PHYLIB
+ help
+ Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F).
+ This can work around link stability and data corruption issues on gigabit
+ links which can occur in slave mode on certain PHYs, e.g. on the
+ RTL8211C(L).
+
+ Please note that two directly connected devices (i.e. via crossover cable)
+ will not be able to establish a link between each other if they both force
+ master mode. Multiple devices forcing master mode when connected by a
+ network switch do not pose a problem as the switch configures its affected
+ ports into slave mode.
+
+ This option only affects gigabit links. If you must establish a direct
+ connection between two devices which both force master mode, try forcing
+ the link speed to 100MBit/s.
+
+ If unsure, say N.
+
menuconfig NETDEVICES
bool "Network device support"
depends on NET
#define PHY_AUTONEGOTIATE_TIMEOUT 5000
+/* RTL8211x 1000BASE-T Control Register */
+#define MIIM_RTL8211x_CTRL1000T_MSCE (1 << 12);
+#define MIIM_RTL8211X_CTRL1000T_MASTER (1 << 11);
+
/* RTL8211x PHY Status Register */
#define MIIM_RTL8211x_PHY_STATUS 0x11
#define MIIM_RTL8211x_PHYSTAT_SPEED 0xc000
*/
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER,
MIIM_RTL8211x_PHY_INTR_DIS);
-
+#ifdef CONFIG_RTL8211X_PHY_FORCE_MASTER
+ unsigned int reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
+ /* force manual master/slave configuration */
+ reg |= MIIM_RTL8211x_CTRL1000T_MSCE;
+ /* force master mode */
+ reg |= MIIM_RTL8211X_CTRL1000T_MASTER;
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg);
+#endif
/* read interrupt status just to clear it */
phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER);
default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
default AXP818_POWER if MACH_SUN8I_A83T
- default SUNXI_NO_PMIC if MACH_SUN8I_H3
+ default SUNXI_NO_PMIC if MACH_SUN8I_H3 || MACH_SUN50I
config SUNXI_NO_PMIC
boolean "board without a pmic"
config AXP_DCDC5_VOLT
int "axp pmic dcdc5 voltage"
depends on AXP221_POWER || AXP818_POWER
- default 1800 if AXP818_POWER
default 1500 if MACH_SUN6I || MACH_SUN8I
---help---
Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
disable dcdc5.
On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V,
- 1.8V for A83T.
+ 1.35V if DDR3L is used.
config AXP_ALDO1_VOLT
int "axp pmic (a)ldo1 voltage"
1.2V for the SSD2828 chip (converter of parallel LCD interface
into MIPI DSI).
+config AXP_FLDO1_VOLT
+ int "axp pmic fldo1 voltage"
+ depends on AXP818_POWER
+ default 0 if MACH_SUN8I_A83T
+ ---help---
+ Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to
+ disable fldo1.
+ On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
+ used.
+
+config AXP_FLDO2_VOLT
+ int "axp pmic eldo2 voltage"
+ depends on AXP818_POWER
+ default 900 if MACH_SUN8I_A83T
+ ---help---
+ Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to
+ disable fldo2.
+ On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
+
+config AXP_FLDO3_VOLT
+ int "axp pmic fldo3 voltage"
+ depends on AXP818_POWER
+ default 0
+ ---help---
+ Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to
+ disable fldo3.
+
config SY8106A_VOUT1_VOLT
int "SY8106A pmic VOUT1 voltage"
depends on SY8106A_POWER
AXP818_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1));
}
+int axp_set_fldo(int fldo_num, unsigned int mvolt)
+{
+ int ret;
+ u8 cfg;
+
+ if (fldo_num < 1 || fldo_num > 3)
+ return -EINVAL;
+
+ if (mvolt == 0)
+ return pmic_bus_clrbits(AXP818_OUTPUT_CTRL3,
+ AXP818_OUTPUT_CTRL3_FLDO1_EN << (fldo_num - 1));
+
+ if (fldo_num < 3) {
+ cfg = axp818_mvolt_to_cfg(mvolt, 700, 1450, 50);
+ ret = pmic_bus_write(AXP818_FLDO1_CTRL + (fldo_num - 1), cfg);
+ } else {
+ /*
+ * Special case for FLDO3, which is DCDC5 / 2 or FLDOIN / 2
+ * Since FLDOIN is unknown, test against DCDC5.
+ */
+ if (mvolt * 2 == CONFIG_AXP_DCDC5_VOLT)
+ ret = pmic_bus_clrbits(AXP818_FLDO2_3_CTRL,
+ AXP818_FLDO2_3_CTRL_FLDO3_VOL);
+ else
+ ret = pmic_bus_setbits(AXP818_FLDO2_3_CTRL,
+ AXP818_FLDO2_3_CTRL_FLDO3_VOL);
+ }
+ if (ret)
+ return ret;
+
+ return pmic_bus_setbits(AXP818_OUTPUT_CTRL3,
+ AXP818_OUTPUT_CTRL3_FLDO1_EN << (fldo_num - 1));
+}
+
int axp_init(void)
{
u8 axp_chip_id;
{ .compatible = "allwinner,sun6i-a31-ehci", },
{ .compatible = "allwinner,sun7i-a20-ehci", },
{ .compatible = "allwinner,sun8i-a23-ehci", },
+ { .compatible = "allwinner,sun8i-a83t-ehci", },
{ .compatible = "allwinner,sun8i-h3-ehci", },
{ .compatible = "allwinner,sun9i-a80-ehci", },
{ }
{ .compatible = "allwinner,sun6i-a31-ohci", },
{ .compatible = "allwinner,sun7i-a20-ohci", },
{ .compatible = "allwinner,sun8i-a23-ohci", },
+ { .compatible = "allwinner,sun8i-a83t-ohci", },
{ .compatible = "allwinner,sun8i-h3-ohci", },
{ .compatible = "allwinner,sun9i-a80-ohci", },
{ }
static inline u8 musb_read_configdata(void __iomem *mbase)
{
-#ifdef CONFIG_MACH_SUN8I_A33
+#if defined CONFIG_MACH_SUN8I_A33 || defined CONFIG_MACH_SUN8I_A83T
/* <Sigh> allwinner saves a reg, and we need to hardcode this */
return 0xde;
#else
#define AXP221_ALDO1_CTRL 0x28
#define AXP221_ALDO2_CTRL 0x29
#define AXP221_ALDO3_CTRL 0x2a
-#define AXP221_VBUS_IPSOUT 0x30
-#define AXP221_VBUS_IPSOUT_DRIVEBUS (1 << 2)
#define AXP221_SHUTDOWN 0x32
#define AXP221_SHUTDOWN_POWEROFF (1 << 7)
-#define AXP221_MISC_CTRL 0x8f
-#define AXP221_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
#define AXP221_PAGE 0xff
/* Page 1 addresses */
/* For axp_gpio.c */
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
+#define AXP_VBUS_IPSOUT 0x30
+#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2)
+#define AXP_MISC_CTRL 0x8f
+#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
#define AXP_GPIO0_CTRL 0x90
#define AXP_GPIO1_CTRL 0x92
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
#define AXP818_ELDO3_CTRL 0x1b
#define AXP818_FLDO1_CTRL 0x1c
#define AXP818_FLDO2_3_CTRL 0x1d
+#define AXP818_FLDO2_3_CTRL_FLDO3_VOL (1 << 4)
#define AXP818_DCDC1_CTRL 0x20
#define AXP818_DCDC2_CTRL 0x21
#define AXP818_DCDC3_CTRL 0x22
#define AXP818_ALDO2_CTRL 0x29
#define AXP818_ALDO3_CTRL 0x2a
-int axp818_init(void);
-
/* For axp_gpio.c */
#define AXP_POWER_STATUS 0x00
-#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
+#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
+#define AXP_VBUS_IPSOUT 0x30
+#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2)
+#define AXP_MISC_CTRL 0x8f
+#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
#define AXP_GPIO0_CTRL 0x90
#define AXP_GPIO1_CTRL 0x92
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
int axp_set_aldo4(unsigned int mvolt);
int axp_set_dldo(int dldo_num, unsigned int mvolt);
int axp_set_eldo(int eldo_num, unsigned int mvolt);
+int axp_set_fldo(int fldo_num, unsigned int mvolt);
int axp_init(void);
int axp_get_sid(unsigned int *sid);
--- /dev/null
+/*
+ * Configuration settings for the Allwinner A64 (sun50i) CPU
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * A64 specific configuration
+ */
+
+#define CONFIG_SUNXI_USB_PHYS 1
+
+#define COUNTER_FREQUENCY CONFIG_TIMER_CLK_FREQ
+#define GICD_BASE 0x1c81000
+#define GICC_BASE 0x1c82000
+
+/*
+ * Include common sunxi configuration where most the settings are
+ */
+#include <configs/sunxi-common.h>
+
+#endif /* __CONFIG_H */
#define CONFIG_ARMV7_PSCI 1
#define CONFIG_ARMV7_PSCI_NR_CPUS 4
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
-#define CONFIG_TIMER_CLK_FREQ 24000000
/*
* Include common sunxi configuration where most the settings are
#define CONFIG_ARMV7_PSCI 1
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
-#define CONFIG_TIMER_CLK_FREQ 24000000
/*
* Include common sunxi configuration where most the settings are
#ifdef CONFIG_MACH_SUN8I_H3
#define CONFIG_SUNXI_USB_PHYS 4
+#elif defined CONFIG_MACH_SUN8I_A83T
+ #define CONFIG_SUNXI_USB_PHYS 3
#else
#define CONFIG_SUNXI_USB_PHYS 2
#endif
#endif
#endif
-#define CONFIG_TIMER_CLK_FREQ 24000000
-
/*
* Include common sunxi configuration where most the settings are
*/
/* CPU */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_TIMER_CLK_FREQ 24000000
/*
* The DRAM Base differs between some models. We cannot use macros for the
#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
-#ifdef CONFIG_MACH_SUN9I
+#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
/*
* The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
* slightly bigger. Note that it is possible to map the first 32 KiB of the
* the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
*/
#define CONFIG_SYS_INIT_RAM_ADDR 0x10000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x0a000 /* 40 KiB */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */
#else
#define CONFIG_SYS_INIT_RAM_ADDR 0x0
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */
#define CONFIG_SPL_BOARD_LOAD_IMAGE
+#if defined(CONFIG_MACH_SUN9I)
+#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */
+#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* ? KiB on sun9i */
+#elif defined(CONFIG_MACH_SUN50I)
+#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */
+#define CONFIG_SPL_MAX_SIZE 0x7fe0 /* 32 KiB on sun50i */
+#else
#define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */
+#endif
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#endif
+#ifndef CONFIG_ARM64
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
+#endif
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
+#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
+/* FIXME: 40 KiB instead of 32 KiB ? */
+#define LOW_LEVEL_SRAM_STACK 0x00018000
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+#else
/* end of 32 KiB in sram */
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+#endif
/* I2C */
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
projects / u-boot / commitdiff