]> git.sur5r.net Git - u-boot/commitdiff
Initial revision
authorwdenk <wdenk>
Wed, 15 May 2002 20:05:05 +0000 (20:05 +0000)
committerwdenk <wdenk>
Wed, 15 May 2002 20:05:05 +0000 (20:05 +0000)
include/asm-ppc/cache.h [new file with mode: 0644]
include/galileo/core.h [new file with mode: 0644]

diff --git a/include/asm-ppc/cache.h b/include/asm-ppc/cache.h
new file mode 100644 (file)
index 0000000..5befab4
--- /dev/null
@@ -0,0 +1,89 @@
+/*
+ * include/asm-ppc/cache.h
+ */
+#ifndef __ARCH_PPC_CACHE_H
+#define __ARCH_PPC_CACHE_H
+
+#include <linux/config.h>
+#include <asm/processor.h>
+
+/* bytes per L1 cache line */
+#if !defined(CONFIG_8xx) || defined(CONFIG_8260)
+#if defined(CONFIG_PPC64BRIDGE)
+#define L1_CACHE_BYTES 128
+#else
+#define        L1_CACHE_BYTES  32
+#endif /* PPC64 */
+#else
+#define        L1_CACHE_BYTES  16
+#endif /* !8xx || 8260 */
+
+#define        L1_CACHE_ALIGN(x)       (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define        L1_CACHE_PAGES          8
+
+#define        SMP_CACHE_BYTES L1_CACHE_BYTES
+
+#ifdef MODULE
+#define __cacheline_aligned __attribute__((__aligned__(L1_CACHE_BYTES)))
+#else
+#define __cacheline_aligned                                    \
+  __attribute__((__aligned__(L1_CACHE_BYTES),                  \
+                __section__(".data.cacheline_aligned")))
+#endif
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+extern void clean_dcache_range(unsigned long start, unsigned long stop);
+extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+#ifdef CFG_INIT_RAM_LOCK
+extern void unlock_ram_in_cache(void);
+#endif /* CFG_INIT_RAM_LOCK */
+#endif /* __ASSEMBLY__ */
+
+/* prep registers for L2 */
+#define CACHECRBA       0x80000823      /* Cache configuration register address */
+#define L2CACHE_MASK   0x03    /* Mask for 2 L2 Cache bits */
+#define L2CACHE_512KB  0x00    /* 512KB */
+#define L2CACHE_256KB  0x01    /* 256KB */
+#define L2CACHE_1MB    0x02    /* 1MB */
+#define L2CACHE_NONE   0x03    /* NONE */
+#define L2CACHE_PARITY  0x08    /* Mask for L2 Cache Parity Protected bit */
+
+#ifdef CONFIG_8xx
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define IC_CST         560     /* Instruction cache control/status */
+#define IC_ADR         561     /* Address needed for some commands */
+#define IC_DAT         562     /* Read-only data register */
+#define DC_CST         568     /* Data cache control/status */
+#define DC_ADR         569     /* Address needed for some commands */
+#define DC_DAT         570     /* Read-only data register */
+
+/* Commands.  Only the first few are available to the instruction cache.
+*/
+#define        IDC_ENABLE      0x02000000      /* Cache enable */
+#define IDC_DISABLE    0x04000000      /* Cache disable */
+#define IDC_LDLCK      0x06000000      /* Load and lock */
+#define IDC_UNLINE     0x08000000      /* Unlock line */
+#define IDC_UNALL      0x0a000000      /* Unlock all */
+#define IDC_INVALL     0x0c000000      /* Invalidate all */
+
+#define DC_FLINE       0x0e000000      /* Flush data cache line */
+#define DC_SFWT                0x01000000      /* Set forced writethrough mode */
+#define DC_CFWT                0x03000000      /* Clear forced writethrough mode */
+#define DC_SLES                0x05000000      /* Set little endian swap mode */
+#define DC_CLES                0x07000000      /* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED    0x80000000      /* Cache is enabled */
+#define IDC_CERR1      0x00200000      /* Cache error 1 */
+#define IDC_CERR2      0x00100000      /* Cache error 2 */
+#define IDC_CERR3      0x00080000      /* Cache error 3 */
+
+#define DC_DFWT                0x40000000      /* Data cache is forced write through */
+#define DC_LES         0x20000000      /* Caches are little endian mode */
+#endif /* CONFIG_8xx */
+
+#endif
diff --git a/include/galileo/core.h b/include/galileo/core.h
new file mode 100644 (file)
index 0000000..56db097
--- /dev/null
@@ -0,0 +1,218 @@
+/* Core.h - Basic core logic functions and definitions */
+
+/* Copyright Galileo Technology. */
+
+/*
+DESCRIPTION
+This header file contains simple read/write macros for addressing
+the SDRAM, devices, GT`s internal registers and PCI (using the PCI`s address
+space). The macros take care of Big/Little endian conversions.
+*/
+
+#ifndef __INCcoreh
+#define __INCcoreh
+
+/* includes */
+#include "gt64260R.h"
+
+extern unsigned int INTERNAL_REG_BASE_ADDR;
+
+/*
+ * GT-6426x variants
+ */
+#define GT_64260       0  /* includes both 64260A and 64260B */
+#define GT_64261       1
+
+#if (CFG_GT_6426x == GT_64260)
+#ifdef CONFIG_ETHER_PORT_MII
+#define GAL_ETH_DEVS 2
+#else
+#define GAL_ETH_DEVS 3
+#endif
+#elif (CFG_GT_6426x == GT_64261)
+#define GAL_ETH_DEVS 2
+#else
+#define GAL_ETH_DEVS 3 /* default to a 64260 */
+#endif
+
+/****************************************/
+/*          GENERAL Definitions                        */
+/****************************************/
+
+#define NO_BIT          0x00000000
+#define BIT0            0x00000001
+#define BIT1            0x00000002
+#define BIT2            0x00000004
+#define BIT3            0x00000008
+#define BIT4            0x00000010
+#define BIT5            0x00000020
+#define BIT6            0x00000040
+#define BIT7            0x00000080
+#define BIT8            0x00000100
+#define BIT9            0x00000200
+#define BIT10           0x00000400
+#define BIT11           0x00000800
+#define BIT12           0x00001000
+#define BIT13           0x00002000
+#define BIT14           0x00004000
+#define BIT15           0x00008000
+#define BIT16           0x00010000
+#define BIT17           0x00020000
+#define BIT18           0x00040000
+#define BIT19           0x00080000
+#define BIT20           0x00100000
+#define BIT21           0x00200000
+#define BIT22           0x00400000
+#define BIT23           0x00800000
+#define BIT24           0x01000000
+#define BIT25           0x02000000
+#define BIT26           0x04000000
+#define BIT27           0x08000000
+#define BIT28           0x10000000
+#define BIT29           0x20000000
+#define BIT30           0x40000000
+#define BIT31           0x80000000
+
+#define _1K             0x00000400
+#define _2K             0x00000800
+#define _4K             0x00001000
+#define _8K             0x00002000
+#define _16K            0x00004000
+#define _32K            0x00008000
+#define _64K            0x00010000
+#define _128K           0x00020000
+#define _256K           0x00040000
+#define _512K           0x00080000
+
+#define _1M             0x00100000
+#define _2M             0x00200000
+#define _3M             0x00300000
+#define _4M             0x00400000
+#define _5M             0x00500000
+#define _6M             0x00600000
+#define _7M             0x00700000
+#define _8M             0x00800000
+#define _9M             0x00900000
+#define _10M            0x00a00000
+#define _11M            0x00b00000
+#define _12M            0x00c00000
+#define _13M            0x00d00000
+#define _14M            0x00e00000
+#define _15M            0x00f00000
+#define _16M            0x01000000
+
+#define _32M            0x02000000
+#define _64M            0x04000000
+#define _128M           0x08000000
+#define _256M           0x10000000
+#define _512M           0x20000000
+
+#define _1G             0x40000000
+#define _2G             0x80000000
+
+typedef enum _bool{false,true} bool;
+
+/* Little to Big endian conversion macros */
+
+#ifdef LE /* Little Endian */
+#define SHORT_SWAP(X) (X)
+#define WORD_SWAP(X) (X)
+#define LONG_SWAP(X) ((l64)(X))
+
+#else    /* Big Endian */
+#define SHORT_SWAP(X) ((X <<8 ) | (X >> 8))
+
+#define WORD_SWAP(X) (((X)&0xff)<<24)+      \
+                    (((X)&0xff00)<<8)+      \
+                    (((X)&0xff0000)>>8)+    \
+                    (((X)&0xff000000)>>24)
+
+#define LONG_SWAP(X) ( (l64) (((X)&0xffULL)<<56)+               \
+                            (((X)&0xff00ULL)<<40)+              \
+                            (((X)&0xff0000ULL)<<24)+            \
+                            (((X)&0xff000000ULL)<<8)+           \
+                            (((X)&0xff00000000ULL)>>8)+         \
+                            (((X)&0xff0000000000ULL)>>24)+      \
+                            (((X)&0xff000000000000ULL)>>40)+    \
+                            (((X)&0xff00000000000000ULL)>>56))
+
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+/* Those two definitions were defined to be compatible with MIPS */
+#define NONE_CACHEABLE         0x00000000
+#define CACHEABLE                      0x00000000
+
+/* 750 cache line */
+#define CACHE_LINE_SIZE 32
+#define CACHELINE_MASK_BITS (CACHE_LINE_SIZE - 1)
+#define CACHELINE_ROUNDUP(A) (((A)+CACHELINE_MASK_BITS) & ~CACHELINE_MASK_BITS)
+
+/* Read/Write to/from GT`s internal registers */
+#define GT_REG_READ(offset, pData)                                          \
+*pData = ( *((volatile unsigned int *)(NONE_CACHEABLE |                     \
+                INTERNAL_REG_BASE_ADDR | (offset))) ) ;                                              \
+*pData = WORD_SWAP(*pData)
+
+#define GTREGREAD(offset)                                                   \
+         (WORD_SWAP( *((volatile unsigned int *)(NONE_CACHEABLE |            \
+                   INTERNAL_REG_BASE_ADDR | (offset))) ))
+
+#define GT_REG_WRITE(offset, data)                                          \
+*((unsigned int *)( INTERNAL_REG_BASE_ADDR | (offset))) =                   \
+                    WORD_SWAP(data)
+
+/* Write 32/16/8 bit */
+#define WRITE_CHAR(address, data)                                           \
+        *((unsigned char *)(address)) = data
+#define WRITE_SHORT(address, data)                                          \
+        *((unsigned short *)(address)) = data
+#define WRITE_WORD(address, data)                                           \
+        *((unsigned int *)(address)) = data
+
+/* Read 32/16/8 bits - returns data in variable. */
+#define READ_CHAR(address, pData)                                           \
+        *pData = *((volatile unsigned char *)(address))
+
+#define READ_SHORT(address, pData)                                          \
+        *pData = *((volatile unsigned short *)(address))
+
+#define READ_WORD(address, pData)                                           \
+        *pData = *((volatile unsigned int *)(address))
+
+/* Read 32/16/8 bit - returns data direct. */
+#define READCHAR(address)                                                   \
+        *((volatile unsigned char *)((address) | NONE_CACHEABLE))
+
+#define READSHORT(address)                                                  \
+        *((volatile unsigned short *)((address) | NONE_CACHEABLE))
+
+#define READWORD(address)                                                   \
+        *((volatile unsigned int *)((address) | NONE_CACHEABLE))
+
+/* Those two Macros were defined to be compatible with MIPS */
+#define VIRTUAL_TO_PHY(x)    (((unsigned int)x) & 0xffffffff)
+#define PHY_TO_VIRTUAL(x)    (((unsigned int)x) | NONE_CACHEABLE)
+
+/*  SET_REG_BITS(regOffset,bits) -
+   gets register offset and bits: a 32bit value. It set to logic '1' in the
+   internal register the bits which given as an input example:
+   SET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to logic
+   '1' in register 0x840 while the other bits stays as is. */
+#define SET_REG_BITS(regOffset,bits) \
+        *(unsigned int*)(NONE_CACHEABLE | INTERNAL_REG_BASE_ADDR |  \
+        regOffset) |= (unsigned int)WORD_SWAP(bits)
+
+/*  RESET_REG_BITS(regOffset,bits) -
+   gets register offset and bits: a 32bit value. It set to logic '0' in the
+   internal register the bits which given as an input example:
+   RESET_REG_BITS(0x840,BIT3 | BIT24 | BIT30) - set bits: 3,24 and 30 to logic
+   '0' in register 0x840 while the other bits stays as is. */
+#define RESET_REG_BITS(regOffset,bits) \
+        *(unsigned int*)(NONE_CACHEABLE | INTERNAL_REG_BASE_ADDR   \
+        | regOffset) &= ~( (unsigned int)WORD_SWAP(bits) )
+
+#endif /* __INCcoreh */