Blackfin: drop dead/wrong debug code in initdram()

The DEBUG code in initdram() is quite old and was never really useful, so
just drop it altogether.  Common Blackfin debug code does a better job.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c
index 69730828cfa5be4337c880284a49bffc482a5836..d5f0b7c689ea322b26a43a958917ed9247cb56c0 100644 (file)
--- a/board/bf533-ezkit/bf533-ezkit.c
+++ b/board/bf533-ezkit/bf533-ezkit.c
@@ -40,21 +40,9 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
-#ifdef DEBUG
-       int brate;
-       char *tmp = getenv("baudrate");
-       brate = simple_strtoul(tmp, NULL, 16);
-       printf("Serial Port initialized with Baud rate = %x\n", brate);
-       printf("SDRAM attributes:\n");
-       printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
-              "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
-              3, 3, 6, 2, 3);
-       printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
-       printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
-#endif
        gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
        gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
-       return CONFIG_SYS_MAX_RAM_SIZE;
+       return gd->bd->bi_memsize;
 }
 
 /* miscellaneous platform dependent initialisations */

diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index 0c6324b4b673a8bd75d4a5d68cee7d87f6bb13a1..1a073a659c3b9932d2a87c52cde8a537dee411ba 100644 (file)
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -49,18 +49,9 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
-#ifdef DEBUG
-       printf("SDRAM attributes:\n");
-       printf
-           ("  tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
-            "CAS Latency:%d cycles\n", (SDRAM_tRCD >> 15), (SDRAM_tRP >> 11),
-            (SDRAM_tRAS >> 6), (SDRAM_tWR >> 19), (SDRAM_CL >> 2));
-       printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
-       printf("Bank size = %d MB\n", 128);
-#endif
        gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
        gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
-       return (gd->bd->bi_memsize);
+       return gd->bd->bi_memsize;
 }
 
 void swap_to(int device_id)

diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index 7303f1b4155e59cf003b8bee64c4690bbe8433e7..63992f6093c392e955f224e77ca1577050a7937b 100644 (file)
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -100,21 +100,9 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
 
 phys_size_t initdram(int board_type)
 {
-#ifdef DEBUG
-       int brate;
-       char *tmp = getenv("baudrate");
-       brate = simple_strtoul(tmp, NULL, 16);
-       printf("Serial Port initialized with Baud rate = %x\n", brate);
-       printf("SDRAM attributes:\n");
-       printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
-              "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
-              3, 3, 6, 2, 3);
-       printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
-       printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
-#endif
        gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
        gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
-       return CONFIG_SYS_MAX_RAM_SIZE;
+       return gd->bd->bi_memsize;
 }
 
 #if defined(CONFIG_MISC_INIT_R)

diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c
index 7f8598c71f8acbefe62df1f5d07826a6298129f4..5aede174d88066128df2b85817c6d61d9974e54b 100644 (file)
--- a/board/bf561-ezkit/bf561-ezkit.c
+++ b/board/bf561-ezkit/bf561-ezkit.c
@@ -39,19 +39,7 @@ int checkboard(void)
 
 phys_size_t initdram(int board_type)
 {
-#ifdef DEBUG
-       int brate;
-       char *tmp = getenv("baudrate");
-       brate = simple_strtoul(tmp, NULL, 16);
-       printf("Serial Port initialized with Baud rate = %x\n", brate);
-       printf("SDRAM attributes:\n");
-       printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
-              "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
-              3, 3, 6, 2, 3);
-       printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE);
-       printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20);
-#endif
        gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
        gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
-       return CONFIG_SYS_MAX_RAM_SIZE;
+       return gd->bd->bi_memsize;
 }