]> git.sur5r.net Git - u-boot/commitdiff
x86: ivybridge: Convert lpc init code to DM PCI API
authorSimon Glass <sjg@chromium.org>
Sun, 17 Jan 2016 23:11:42 +0000 (16:11 -0700)
committerBin Meng <bmeng.cn@gmail.com>
Sun, 24 Jan 2016 04:09:40 +0000 (12:09 +0800)
Adjust this code to use the driver model PCI API. This is all called through
lpc_init_extra().

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
arch/x86/cpu/ivybridge/lpc.c

index 79224d93881bccee1bd6621c857c762d59c3f87c..0cf55c54579ded44f1615a11ef952d6dabedc3d9 100644 (file)
 #define ENABLE_ACPI_MODE_IN_COREBOOT   0
 #define TEST_SMM_FLASH_LOCKDOWN                0
 
-static int pch_enable_apic(pci_dev_t dev)
+static int pch_enable_apic(struct udevice *pch)
 {
        u32 reg32;
        int i;
 
        /* Enable ACPI I/O and power management. Set SCI IRQ to IRQ9 */
-       x86_pci_write_config8(dev, ACPI_CNTL, 0x80);
+       dm_pci_write_config8(pch, ACPI_CNTL, 0x80);
 
        writel(0, IO_APIC_INDEX);
        writel(1 << 25, IO_APIC_DATA);
@@ -66,36 +66,36 @@ static int pch_enable_apic(pci_dev_t dev)
        return 0;
 }
 
-static void pch_enable_serial_irqs(pci_dev_t dev)
+static void pch_enable_serial_irqs(struct udevice *pch)
 {
        u32 value;
 
        /* Set packet length and toggle silent mode bit for one frame. */
        value = (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0);
 #ifdef CONFIG_SERIRQ_CONTINUOUS_MODE
-       x86_pci_write_config8(dev, SERIRQ_CNTL, value);
+       dm_pci_write_config8(pch, SERIRQ_CNTL, value);
 #else
-       x86_pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6));
+       dm_pci_write_config8(pch, SERIRQ_CNTL, value | (1 << 6));
 #endif
 }
 
-static int pch_pirq_init(const void *blob, int node, pci_dev_t dev)
+static int pch_pirq_init(struct udevice *pch)
 {
        uint8_t route[8], *ptr;
 
-       if (fdtdec_get_byte_array(blob, node, "intel,pirq-routing", route,
-                                 sizeof(route)))
+       if (fdtdec_get_byte_array(gd->fdt_blob, pch->of_offset,
+                                 "intel,pirq-routing", route, sizeof(route)))
                return -EINVAL;
        ptr = route;
-       x86_pci_write_config8(dev, PIRQA_ROUT, *ptr++);
-       x86_pci_write_config8(dev, PIRQB_ROUT, *ptr++);
-       x86_pci_write_config8(dev, PIRQC_ROUT, *ptr++);
-       x86_pci_write_config8(dev, PIRQD_ROUT, *ptr++);
+       dm_pci_write_config8(pch, PIRQA_ROUT, *ptr++);
+       dm_pci_write_config8(pch, PIRQB_ROUT, *ptr++);
+       dm_pci_write_config8(pch, PIRQC_ROUT, *ptr++);
+       dm_pci_write_config8(pch, PIRQD_ROUT, *ptr++);
 
-       x86_pci_write_config8(dev, PIRQE_ROUT, *ptr++);
-       x86_pci_write_config8(dev, PIRQF_ROUT, *ptr++);
-       x86_pci_write_config8(dev, PIRQG_ROUT, *ptr++);
-       x86_pci_write_config8(dev, PIRQH_ROUT, *ptr++);
+       dm_pci_write_config8(pch, PIRQE_ROUT, *ptr++);
+       dm_pci_write_config8(pch, PIRQF_ROUT, *ptr++);
+       dm_pci_write_config8(pch, PIRQG_ROUT, *ptr++);
+       dm_pci_write_config8(pch, PIRQH_ROUT, *ptr++);
 
        /*
         * TODO(sjg@chromium.org): U-Boot does not set up the interrupts
@@ -104,26 +104,28 @@ static int pch_pirq_init(const void *blob, int node, pci_dev_t dev)
        return 0;
 }
 
-static int pch_gpi_routing(const void *blob, int node, pci_dev_t dev)
+static int pch_gpi_routing(struct udevice *pch)
 {
        u8 route[16];
        u32 reg;
        int gpi;
 
-       if (fdtdec_get_byte_array(blob, node, "intel,gpi-routing", route,
-                                 sizeof(route)))
+       if (fdtdec_get_byte_array(gd->fdt_blob, pch->of_offset,
+                                 "intel,gpi-routing", route, sizeof(route)))
                return -EINVAL;
 
        for (reg = 0, gpi = 0; gpi < ARRAY_SIZE(route); gpi++)
                reg |= route[gpi] << (gpi * 2);
 
-       x86_pci_write_config32(dev, 0xb8, reg);
+       dm_pci_write_config32(pch, 0xb8, reg);
 
        return 0;
 }
 
-static int pch_power_options(const void *blob, int node, pci_dev_t dev)
+static int pch_power_options(struct udevice *pch)
 {
+       const void *blob = gd->fdt_blob;
+       int node = pch->of_offset;
        u8 reg8;
        u16 reg16, pmbase;
        u32 reg32;
@@ -142,7 +144,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
         */
        pwr_on = MAINBOARD_POWER_ON;
 
-       reg16 = x86_pci_read_config16(dev, GEN_PMCON_3);
+       dm_pci_read_config16(pch, GEN_PMCON_3, &reg16);
        reg16 &= 0xfffe;
        switch (pwr_on) {
        case MAINBOARD_POWER_OFF:
@@ -169,7 +171,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
 
        reg16 |= (1 << 12);     /* Disable SLP stretch after SUS well */
 
-       x86_pci_write_config16(dev, GEN_PMCON_3, reg16);
+       dm_pci_write_config16(pch, GEN_PMCON_3, reg16);
        debug("Set power %s after power failure.\n", state);
 
        /* Set up NMI on errors. */
@@ -193,21 +195,22 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
        outb(reg8, 0x70);
 
        /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
-       reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
+       dm_pci_read_config16(pch, GEN_PMCON_1, &reg16);
        reg16 &= ~(3 << 0);     /* SMI# rate 1 minute */
        reg16 &= ~(1 << 10);    /* Disable BIOS_PCI_EXP_EN for native PME */
 #if DEBUG_PERIODIC_SMIS
        /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using periodic SMIs */
        reg16 |= (3 << 0);      /* Periodic SMI every 8s */
 #endif
-       x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
+       dm_pci_write_config16(pch, GEN_PMCON_1, reg16);
 
        /* Set the board's GPI routing. */
-       ret = pch_gpi_routing(blob, node, dev);
+       ret = pch_gpi_routing(pch);
        if (ret)
                return ret;
 
-       pmbase = x86_pci_read_config16(dev, 0x40) & 0xfffe;
+       dm_pci_read_config16(pch, 0x40, &pmbase);
+       pmbase &= 0xfffe;
 
        writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node,
                                                "intel,gpe0-enable", 0));
@@ -227,16 +230,16 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
        return 0;
 }
 
-static void pch_rtc_init(pci_dev_t dev)
+static void pch_rtc_init(struct udevice *pch)
 {
        int rtc_failed;
        u8 reg8;
 
-       reg8 = x86_pci_read_config8(dev, GEN_PMCON_3);
+       dm_pci_read_config8(pch, GEN_PMCON_3, &reg8);
        rtc_failed = reg8 & RTC_BATTERY_DEAD;
        if (rtc_failed) {
                reg8 &= ~RTC_BATTERY_DEAD;
-               x86_pci_write_config8(dev, GEN_PMCON_3, reg8);
+               dm_pci_write_config8(pch, GEN_PMCON_3, reg8);
        }
        debug("rtc_failed = 0x%x\n", rtc_failed);
 
@@ -246,10 +249,10 @@ static void pch_rtc_init(pci_dev_t dev)
 }
 
 /* CougarPoint PCH Power Management init */
-static void cpt_pm_init(pci_dev_t dev)
+static void cpt_pm_init(struct udevice *pch)
 {
        debug("CougarPoint PM init\n");
-       x86_pci_write_config8(dev, 0xa9, 0x47);
+       dm_pci_write_config8(pch, 0xa9, 0x47);
        setbits_le32(RCB_REG(0x2238), (1 << 6) | (1 << 0));
 
        setbits_le32(RCB_REG(0x228c), 1 << 0);
@@ -290,10 +293,10 @@ static void cpt_pm_init(pci_dev_t dev)
 }
 
 /* PantherPoint PCH Power Management init */
-static void ppt_pm_init(pci_dev_t dev)
+static void ppt_pm_init(struct udevice *pch)
 {
        debug("PantherPoint PM init\n");
-       x86_pci_write_config8(dev, 0xa9, 0x47);
+       dm_pci_write_config8(pch, 0xa9, 0x47);
        setbits_le32(RCB_REG(0x2238), 1 << 0);
        setbits_le32(RCB_REG(0x228c), 1 << 0);
        setbits_le16(RCB_REG(0x1100), (1 << 13) | (1 << 14));
@@ -340,16 +343,16 @@ static void enable_hpet(void)
        clrsetbits_le32(RCB_REG(HPTC), 3 << 0, 1 << 7);
 }
 
-static void enable_clock_gating(pci_dev_t dev)
+static void enable_clock_gating(struct udevice *pch)
 {
        u32 reg32;
        u16 reg16;
 
        setbits_le32(RCB_REG(0x2234), 0xf);
 
-       reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
+       dm_pci_read_config16(pch, GEN_PMCON_1, &reg16);
        reg16 |= (1 << 2) | (1 << 11);
-       x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
+       dm_pci_write_config16(pch, GEN_PMCON_1, reg16);
 
        pch_iobp_update(0xEB007F07, ~0UL, (1 << 31));
        pch_iobp_update(0xEB004000, ~0UL, (1 << 7));
@@ -429,24 +432,24 @@ static void pch_lock_smm(pci_dev_t dev)
 }
 #endif
 
-static void pch_disable_smm_only_flashing(pci_dev_t dev)
+static void pch_disable_smm_only_flashing(struct udevice *pch)
 {
        u8 reg8;
 
        debug("Enabling BIOS updates outside of SMM... ");
-       reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
+       dm_pci_read_config8(pch, 0xdc, &reg8);  /* BIOS_CNTL */
        reg8 &= ~(1 << 5);
-       x86_pci_write_config8(dev, 0xdc, reg8);
+       dm_pci_write_config8(pch, 0xdc, reg8);
 }
 
-static void pch_fixups(pci_dev_t dev)
+static void pch_fixups(struct udevice *pch)
 {
        u8 gen_pmcon_2;
 
        /* Indicate DRAM init done for MRC S3 to know it can resume */
-       gen_pmcon_2 = x86_pci_read_config8(dev, GEN_PMCON_2);
+       dm_pci_read_config8(pch, GEN_PMCON_2, &gen_pmcon_2);
        gen_pmcon_2 |= (1 << 7);
-       x86_pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
+       dm_pci_write_config8(pch, GEN_PMCON_2, gen_pmcon_2);
 
        /* Enable DMI ASPM in the PCH */
        clrbits_le32(RCB_REG(0x2304), 1 << 10);
@@ -538,66 +541,66 @@ static int lpc_early_init(struct udevice *dev)
        return 0;
 }
 
-static int lpc_init_extra(struct pci_controller *hose, pci_dev_t dev)
+static int lpc_init_extra(struct udevice *dev)
 {
+       struct udevice *pch = dev->parent;
        const void *blob = gd->fdt_blob;
        int node;
 
        debug("pch: lpc_init\n");
-       pci_write_bar32(hose, dev, 0, 0);
-       pci_write_bar32(hose, dev, 1, 0xff800000);
-       pci_write_bar32(hose, dev, 2, 0xfec00000);
-       pci_write_bar32(hose, dev, 3, 0x800);
-       pci_write_bar32(hose, dev, 4, 0x900);
+       dm_pci_write_bar32(pch, 0, 0);
+       dm_pci_write_bar32(pch, 1, 0xff800000);
+       dm_pci_write_bar32(pch, 2, 0xfec00000);
+       dm_pci_write_bar32(pch, 3, 0x800);
+       dm_pci_write_bar32(pch, 4, 0x900);
 
        node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_PCH);
        if (node < 0)
                return -ENOENT;
 
        /* Set the value for PCI command register. */
-       x86_pci_write_config16(dev, PCI_COMMAND, 0x000f);
+       dm_pci_write_config16(pch, PCI_COMMAND, 0x000f);
 
        /* IO APIC initialization. */
-       pch_enable_apic(dev);
+       pch_enable_apic(pch);
 
-       pch_enable_serial_irqs(dev);
+       pch_enable_serial_irqs(pch);
 
        /* Setup the PIRQ. */
-       pch_pirq_init(blob, node, dev);
+       pch_pirq_init(pch);
 
        /* Setup power options. */
-       pch_power_options(blob, node, dev);
+       pch_power_options(pch);
 
        /* Initialize power management */
        switch (pch_silicon_type()) {
        case PCH_TYPE_CPT: /* CougarPoint */
-               cpt_pm_init(dev);
+               cpt_pm_init(pch);
                break;
        case PCH_TYPE_PPT: /* PantherPoint */
-               ppt_pm_init(dev);
+               ppt_pm_init(pch);
                break;
        default:
-               printf("Unknown Chipset: %#02x.%dx\n", PCI_DEV(dev),
-                      PCI_FUNC(dev));
+               printf("Unknown Chipset: %s\n", pch->name);
                return -ENOSYS;
        }
 
        /* Initialize the real time clock. */
-       pch_rtc_init(dev);
+       pch_rtc_init(pch);
 
        /* Initialize the High Precision Event Timers, if present. */
        enable_hpet();
 
        /* Initialize Clock Gating */
-       enable_clock_gating(dev);
+       enable_clock_gating(pch);
 
-       pch_disable_smm_only_flashing(dev);
+       pch_disable_smm_only_flashing(pch);
 
 #if CONFIG_HAVE_SMI_HANDLER
        pch_lock_smm(dev);
 #endif
 
-       pch_fixups(dev);
+       pch_fixups(pch);
 
        return 0;
 }
@@ -636,7 +639,7 @@ static int bd82x6x_lpc_probe(struct udevice *dev)
                return bd82x6x_lpc_early_init(dev);
        }
 
-       return lpc_init_extra(pci_bus_to_hose(0), PCH_LPC_DEV);
+       return lpc_init_extra(dev);
 }
 
 static const struct udevice_id bd82x6x_lpc_ids[] = {