* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*
+ * Portions of this file are derived from the Linux kernel source
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
".hidden irq_"#x"\n" \
".type irq_"#x", @function\n" \
"irq_"#x":\n" \
- "pushl %ebp\n" \
- "movl %esp,%ebp\n" \
- "pusha\n" \
"pushl $"#x"\n" \
"jmp irq_common_entry\n"
+/*
+ * Volatile isn't enough to prevent the compiler from reordering the
+ * read/write functions for the control registers and messing everything up.
+ * A memory clobber would solve the problem, but would prevent reordering of
+ * all loads stores around it, which can hurt performance. Solution is to
+ * use a variable and mimic reads and writes to it to enforce serialization
+ */
+static unsigned long __force_order;
+
+static inline unsigned long read_cr0(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline unsigned long read_cr2(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline unsigned long read_cr3(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline unsigned long read_cr4(void)
+{
+ unsigned long val;
+ asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
+ return val;
+}
+
+static inline unsigned long get_debugreg(int regno)
+{
+ unsigned long val = 0; /* Damn you, gcc! */
+
+ switch (regno) {
+ case 0:
+ asm("mov %%db0, %0" :"=r" (val));
+ break;
+ case 1:
+ asm("mov %%db1, %0" :"=r" (val));
+ break;
+ case 2:
+ asm("mov %%db2, %0" :"=r" (val));
+ break;
+ case 3:
+ asm("mov %%db3, %0" :"=r" (val));
+ break;
+ case 6:
+ asm("mov %%db6, %0" :"=r" (val));
+ break;
+ case 7:
+ asm("mov %%db7, %0" :"=r" (val));
+ break;
+ default:
+ val = 0;
+ }
+ return val;
+}
+
+void dump_regs(struct pt_regs *regs)
+{
+ unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
+ unsigned long d0, d1, d2, d3, d6, d7;
+
+ printf("EIP: %04x:[<%08lx>] EFLAGS: %08lx\n",
+ (u16)regs->xcs, regs->eip, regs->eflags);
+
+ printf("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
+ regs->eax, regs->ebx, regs->ecx, regs->edx);
+ printf("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
+ regs->esi, regs->edi, regs->ebp, regs->esp);
+ printf(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
+ (u16)regs->xds, (u16)regs->xes, (u16)regs->xfs, (u16)regs->xgs, (u16)regs->xss);
+
+ cr0 = read_cr0();
+ cr2 = read_cr2();
+ cr3 = read_cr3();
+ cr4 = read_cr4();
+
+ printf("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
+ cr0, cr2, cr3, cr4);
+
+ d0 = get_debugreg(0);
+ d1 = get_debugreg(1);
+ d2 = get_debugreg(2);
+ d3 = get_debugreg(3);
+
+ printf("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
+ d0, d1, d2, d3);
+
+ d6 = get_debugreg(6);
+ d7 = get_debugreg(7);
+ printf("DR6: %08lx DR7: %08lx\n",
+ d6, d7);
+}
+
struct idt_entry {
u16 base_low;
u16 selector;
}
/* IRQ Low-Level Service Routine */
-__isr__ irq_llsr(int ip, int seg, int irq)
+__isr__ irq_llsr(struct pt_regs *regs)
{
/*
* For detailed description of each exception, refer to:
* Order Number: 253665-029US, November 2008
* Table 6-1. Exceptions and Interrupts
*/
- switch (irq) {
+ switch (regs->orig_eax) {
case 0x00:
- printf("Divide Error (Division by zero) at %04x:%08x\n", seg, ip);
+ printf("Divide Error (Division by zero)\n");
+ dump_regs(regs);
while(1);
break;
case 0x01:
- printf("Debug Interrupt (Single step) at %04x:%08x\n", seg, ip);
+ printf("Debug Interrupt (Single step)\n");
+ dump_regs(regs);
break;
case 0x02:
- printf("NMI Interrupt at %04x:%08x\n", seg, ip);
+ printf("NMI Interrupt\n");
+ dump_regs(regs);
break;
case 0x03:
- printf("Breakpoint at %04x:%08x\n", seg, ip);
+ printf("Breakpoint\n");
+ dump_regs(regs);
break;
case 0x04:
- printf("Overflow at %04x:%08x\n", seg, ip);
+ printf("Overflow\n");
+ dump_regs(regs);
while(1);
break;
case 0x05:
- printf("BOUND Range Exceeded at %04x:%08x\n", seg, ip);
+ printf("BOUND Range Exceeded\n");
+ dump_regs(regs);
while(1);
break;
case 0x06:
- printf("Invalid Opcode (UnDefined Opcode) at %04x:%08x\n", seg, ip);
+ printf("Invalid Opcode (UnDefined Opcode)\n");
+ dump_regs(regs);
while(1);
break;
case 0x07:
- printf("Device Not Available (No Math Coprocessor) at %04x:%08x\n", seg, ip);
+ printf("Device Not Available (No Math Coprocessor)\n");
+ dump_regs(regs);
while(1);
break;
case 0x08:
- printf("Double fault at %04x:%08x\n", seg, ip);
+ printf("Double fault\n");
+ dump_regs(regs);
while(1);
break;
case 0x09:
- printf("Co-processor segment overrun at %04x:%08x\n", seg, ip);
+ printf("Co-processor segment overrun\n");
+ dump_regs(regs);
while(1);
break;
case 0x0a:
- printf("Invalid TSS at %04x:%08x\n", seg, ip);
+ printf("Invalid TSS\n");
+ dump_regs(regs);
break;
case 0x0b:
- printf("Segment Not Present at %04x:%08x\n", seg, ip);
+ printf("Segment Not Present\n");
+ dump_regs(regs);
while(1);
break;
case 0x0c:
- printf("Stack Segment Fault at %04x:%08x\n", seg, ip);
+ printf("Stack Segment Fault\n");
+ dump_regs(regs);
while(1);
break;
case 0x0d:
- printf("General Protection at %04x:%08x\n", seg, ip);
+ printf("General Protection\n");
+ dump_regs(regs);
break;
case 0x0e:
- printf("Page fault at %04x:%08x\n", seg, ip);
+ printf("Page fault\n");
+ dump_regs(regs);
while(1);
break;
case 0x0f:
- printf("Floating-Point Error (Math Fault) at %04x:%08x\n", seg, ip);
+ printf("Floating-Point Error (Math Fault)\n");
+ dump_regs(regs);
break;
case 0x10:
- printf("Alignment check at %04x:%08x\n", seg, ip);
+ printf("Alignment check\n");
+ dump_regs(regs);
break;
case 0x11:
- printf("Machine Check at %04x:%08x\n", seg, ip);
+ printf("Machine Check\n");
+ dump_regs(regs);
break;
case 0x12:
- printf("SIMD Floating-Point Exception at %04x:%08x\n", seg, ip);
+ printf("SIMD Floating-Point Exception\n");
+ dump_regs(regs);
break;
case 0x13:
case 0x14:
case 0x1d:
case 0x1e:
case 0x1f:
- printf("Reserved Exception %d at %04x:%08x\n", irq, seg, ip);
+ printf("Reserved Exception\n");
+ dump_regs(regs);
break;
default:
/* Hardware or User IRQ */
- do_irq(irq);
+ do_irq(regs->orig_eax);
}
}
* fully relocatable code.
* - The call to irq_llsr will be a relative jump
* - The IRQ entries will be guaranteed to be in order
- * It's a bit annoying that we need to waste 3 bytes per interrupt entry
- * (total of 768 code bytes), but we MUST create a Stack Frame and this is
- * the easiest way I could do it. Maybe it can be made better later.
+ * Interrupt entries are now very small (a push and a jump) but they are
+ * now slower (all registers pushed on stack which provides complete
+ * crash dumps in the low level handlers
*/
asm(".globl irq_common_entry\n" \
".hidden irq_common_entry\n" \
".type irq_common_entry, @function\n" \
"irq_common_entry:\n" \
- "pushl $0\n" \
- "pushl $0\n" \
+ "cld\n" \
+ "pushl %gs\n" \
+ "pushl %fs\n" \
+ "pushl %es\n" \
+ "pushl %ds\n" \
+ "pushl %eax\n" \
+ "pushl %ebp\n" \
+ "pushl %edi\n" \
+ "pushl %esi\n" \
+ "pushl %edx\n" \
+ "pushl %ecx\n" \
+ "pushl %ebx\n" \
+ "mov %esp, %eax\n" \
+ "pushl %ebp\n" \
+ "movl %esp,%ebp\n" \
+ "pushl %eax\n" \
"call irq_llsr\n" \
"popl %eax\n" \
- "popl %eax\n" \
- "popl %eax\n" \
- "popa\n" \
"leave\n"\
+ "popl %ebx\n" \
+ "popl %ecx\n" \
+ "popl %edx\n" \
+ "popl %esi\n" \
+ "popl %edi\n" \
+ "popl %ebp\n" \
+ "popl %eax\n" \
+ "popl %ds\n" \
+ "popl %es\n" \
+ "popl %fs\n" \
+ "popl %gs\n" \
+ "add $4, %esp\n" \
"iret\n" \
DECLARE_INTERRUPT(0) \
DECLARE_INTERRUPT(1) \
projects / u-boot / commitdiff