--- /dev/null
+/*
+ * (C) Copyright 2011
+ * Alexander Holler <holler@ahsoftware.de>
+ *
+ * Based on "drivers/usb/host/ehci-omap.c" from Linux 2.6.37
+ *
+ * See there for additional Copyrights.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+#ifndef _OMAP3_EHCI_H_
+#define _OMAP3_EHCI_H_
+
+/* USB/EHCI registers */
+#define OMAP_USBTLL_BASE 0x48062000UL
+#define OMAP_UHH_BASE 0x48064000UL
+#define OMAP_EHCI_BASE 0x48064800UL
+
+/* TLL Register Set */
+#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
+#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
+#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
+#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
+#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1
+
+/* UHH Register Set */
+#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1)
+#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8)
+#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3)
+#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2)
+#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12)
+#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2)
+
+#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_CACTIVITY | \
+ OMAP_UHH_SYSCONFIG_SIDLEMODE | \
+ OMAP_UHH_SYSCONFIG_ENAWAKEUP | \
+ OMAP_UHH_SYSCONFIG_MIDLEMODE)
+
+#endif /* _OMAP3_EHCI_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2011
- * Alexander Holler <holler@ahsoftware.de>
- *
- * Based on "drivers/usb/host/ehci-omap.c" from Linux 2.6.37
- *
- * See there for additional Copyrights.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-#ifndef _EHCI_OMAP3_H_
-#define _EHCI_OMAP3_H_
-
-/* USB/EHCI registers */
-#define OMAP3_USBTLL_BASE 0x48062000UL
-#define OMAP3_UHH_BASE 0x48064000UL
-#define OMAP3_EHCI_BASE 0x48064800UL
-
-/* TLL Register Set */
-#define OMAP_USBTLL_SYSCONFIG (0x10)
-#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
-#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
-#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
-#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
-
-#define OMAP_USBTLL_SYSSTATUS (0x14)
-#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0)
-
-/* UHH Register Set */
-#define OMAP_UHH_SYSCONFIG (0x10)
-#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1)
-#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8)
-#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3)
-#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2)
-#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12)
-
-#define OMAP_UHH_HOSTCONFIG (0x40)
-#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2)
-#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3)
-#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4)
-
-#endif /* _EHCI_OMAP3_H_ */
--- /dev/null
+/*
+ * OMAP EHCI port support
+ * Based on LINUX KERNEL
+ * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Govindraj R <govindraj.raja@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _OMAP4_EHCI_H_
+#define _OMAP4_EHCI_H_
+
+#define OMAP_EHCI_BASE (OMAP44XX_L4_CORE_BASE + 0x64C00)
+#define OMAP_UHH_BASE (OMAP44XX_L4_CORE_BASE + 0x64000)
+#define OMAP_USBTLL_BASE (OMAP44XX_L4_CORE_BASE + 0x62000)
+
+/* UHH, TLL and opt clocks */
+#define CM_L3INIT_HSUSBHOST_CLKCTRL 0x4A009358UL
+
+#define HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK (1 << 24)
+
+/* TLL Register Set */
+#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
+#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
+#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
+#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
+#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1
+
+#define OMAP_UHH_SYSCONFIG_SOFTRESET 1
+#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOIDLE (1 << 2)
+#define OMAP_UHH_SYSCONFIG_NOSTDBY (1 << 4)
+
+#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_NOIDLE | \
+ OMAP_UHH_SYSCONFIG_NOSTDBY)
+
+#endif /* _OMAP4_EHCI_H_ */
--- /dev/null
+/*
+ * OMAP EHCI port support
+ * Based on LINUX KERNEL
+ * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com*
+ * Author: Govindraj R <govindraj.raja@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _OMAP_COMMON_EHCI_H_
+#define _OMAP_COMMON_EHCI_H_
+
+enum usbhs_omap_port_mode {
+ OMAP_USBHS_PORT_MODE_UNUSED,
+ OMAP_EHCI_PORT_MODE_PHY,
+ OMAP_EHCI_PORT_MODE_TLL,
+ OMAP_EHCI_PORT_MODE_HSIC,
+};
+
+#ifdef CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
+#define OMAP_HS_USB_PORTS CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
+#else
+#define OMAP_HS_USB_PORTS 3
+#endif
+
+#define is_ehci_phy_mode(x) ((x) == OMAP_EHCI_PORT_MODE_PHY)
+#define is_ehci_tll_mode(x) ((x) == OMAP_EHCI_PORT_MODE_TLL)
+#define is_ehci_hsic_mode(x) ((x) == OMAP_EHCI_PORT_MODE_HSIC)
+
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */
+#define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */
+
+/* UHH Register Set */
+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2)
+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3)
+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4)
+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5)
+
+#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS 1
+#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11)
+#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12)
+#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31)
+
+#define OMAP_P1_MODE_CLEAR (3 << 16)
+#define OMAP_P1_MODE_TLL (1 << 16)
+#define OMAP_P1_MODE_HSIC (3 << 16)
+#define OMAP_P2_MODE_CLEAR (3 << 18)
+#define OMAP_P2_MODE_TLL (1 << 18)
+#define OMAP_P2_MODE_HSIC (3 << 18)
+#define OMAP_P3_MODE_HSIC (3 << 20)
+
+/* EHCI Register Set */
+#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
+#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
+#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
+#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
+#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
+
+#define OMAP_REV1_TLL_CHANNEL_COUNT 3
+#define OMAP_REV2_TLL_CHANNEL_COUNT 2
+
+/* TLL Register Set */
+#define OMAP_TLL_CHANNEL_CONF(num) (0x004 * num)
+#define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16)
+#define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15)
+#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11)
+#define OMAP_TLL_CHANNEL_CONF_CHANMODE_TRANSPARENT_UTMI (2 << 1)
+#define OMAP_TLL_CHANNEL_CONF_CHANEN 1
+
+struct omap_usbhs_board_data {
+ enum usbhs_omap_port_mode port_mode[OMAP_HS_USB_PORTS];
+};
+
+struct omap_usbtll {
+ u32 rev; /* 0x00 */
+ u32 hwinfo; /* 0x04 */
+ u8 reserved1[0x8];
+ u32 sysc; /* 0x10 */
+ u32 syss; /* 0x14 */
+ u32 irqst; /* 0x18 */
+ u32 irqen; /* 0x1c */
+ u8 reserved2[0x10];
+ u32 shared_conf; /* 0x30 */
+ u8 reserved3[0xc];
+ u32 channel_conf; /* 0x40 */
+};
+
+struct omap_uhh {
+ u32 rev; /* 0x00 */
+ u32 hwinfo; /* 0x04 */
+ u8 reserved1[0x8];
+ u32 sysc; /* 0x10 */
+ u32 syss; /* 0x14 */
+ u8 reserved2[0x28];
+ u32 hostconfig; /* 0x40 */
+ u32 debugcsr; /* 0x44 */
+};
+
+struct omap_ehci {
+ u32 hccapbase; /* 0x00 */
+ u32 hcsparams; /* 0x04 */
+ u32 hccparams; /* 0x08 */
+ u8 reserved1[0x04];
+ u32 usbcmd; /* 0x10 */
+ u32 usbsts; /* 0x14 */
+ u32 usbintr; /* 0x18 */
+ u32 frindex; /* 0x1c */
+ u32 ctrldssegment; /* 0x20 */
+ u32 periodiclistbase; /* 0x24 */
+ u32 asysnclistaddr; /* 0x28 */
+ u8 reserved2[0x24];
+ u32 configflag; /* 0x50 */
+ u32 portsc_i; /* 0x54 */
+ u8 reserved3[0x38];
+ u32 insreg00; /* 0x90 */
+ u32 insreg01; /* 0x94 */
+ u32 insreg02; /* 0x98 */
+ u32 insreg03; /* 0x9c */
+ u32 insreg04; /* 0xa0 */
+ u32 insreg05_utmi_ulpi; /* 0xa4 */
+ u32 insreg06; /* 0xa8 */
+ u32 insreg07; /* 0xac */
+ u32 insreg08; /* 0xb0 */
+};
+
+int omap_ehci_hcd_init(struct omap_usbhs_board_data *usbhs_pdata);
+int omap_ehci_hcd_stop(void);
+
+#endif /* _OMAP_COMMON_EHCI_H_ */
#include "beagle.h"
#include <command.h>
+#ifdef CONFIG_USB_EHCI
+#include <usb.h>
+#include <asm/ehci-omap.h>
+#endif
+
#define pr_debug(fmt, args...) debug(fmt, ##args)
#define TWL4030_I2C_BUS 0
if(val == 15)
usb_stop();
}
+
+static struct omap_usbhs_board_data usbhs_bdata = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
+};
+
+int ehci_hcd_init(void)
+{
+ return omap_ehci_hcd_init(&usbhs_bdata);
+}
+
+int ehci_hcd_stop(void)
+{
+ return omap_ehci_hcd_stop();
+}
+
#endif /* CONFIG_USB_EHCI */
#ifndef CONFIG_SPL_BUILD
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/clocks.h>
#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
#include "panda_mux_data.h"
+#ifdef CONFIG_USB_EHCI
+#include <usb.h>
+#include <asm/arch/ehci.h>
+#include <asm/ehci-omap.h>
+#endif
+
#define PANDA_ULPI_PHY_TYPE_GPIO 182
DECLARE_GLOBAL_DATA_PTR;
}
#endif
+#ifdef CONFIG_USB_EHCI
+
+static struct omap_usbhs_board_data usbhs_bdata = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+};
+
+int ehci_hcd_init(void)
+{
+ int ret;
+ unsigned int utmi_clk;
+
+ /* Now we can enable our port clocks */
+ utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
+ utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
+ sr32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, utmi_clk);
+
+ ret = omap_ehci_hcd_init(&usbhs_bdata);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int ehci_hcd_stop(void)
+{
+ return omap_ehci_hcd_stop();
+}
+#endif
+
/*
* get_board_rev() - get board revision
*/
*/
#include <common.h>
#include <usb.h>
+#include <usb/ulpi.h>
+#include <errno.h>
#include <asm/io.h>
#include <asm/gpio.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/clocks_omap3.h>
-#include <asm/arch/ehci_omap3.h>
-#include <asm/arch/sys_proto.h>
+#include <asm/arch/ehci.h>
+#include <asm/ehci-omap.h>
#include "ehci-core.h"
+static struct omap_uhh *const uhh = (struct omap_uhh *)OMAP_UHH_BASE;
+static struct omap_usbtll *const usbtll = (struct omap_usbtll *)OMAP_USBTLL_BASE;
+static struct omap_ehci *const ehci = (struct omap_ehci *)OMAP_EHCI_BASE;
+
+static int omap_uhh_reset(void)
+{
+ unsigned long init = get_timer(0);
+
+ /* perform UHH soft reset, and wait until reset is complete */
+ writel(OMAP_UHH_SYSCONFIG_SOFTRESET, &uhh->sysc);
+
+ /* Wait for UHH reset to complete */
+ while (!(readl(&uhh->syss) & OMAP_UHH_SYSSTATUS_EHCI_RESETDONE))
+ if (get_timer(init) > CONFIG_SYS_HZ) {
+ debug("OMAP UHH error: timeout resetting ehci\n");
+ return -EL3RST;
+ }
+
+ return 0;
+}
+
+static int omap_ehci_tll_reset(void)
+{
+ unsigned long init = get_timer(0);
+
+ /* perform TLL soft reset, and wait until reset is complete */
+ writel(OMAP_USBTLL_SYSCONFIG_SOFTRESET, &usbtll->sysc);
+
+ /* Wait for TLL reset to complete */
+ while (!(readl(&usbtll->syss) & OMAP_USBTLL_SYSSTATUS_RESETDONE))
+ if (get_timer(init) > CONFIG_SYS_HZ) {
+ debug("OMAP EHCI error: timeout resetting TLL\n");
+ return -EL3RST;
+ }
+
+ return 0;
+}
+
+static void omap_usbhs_hsic_init(int port)
+{
+ unsigned int reg;
+
+ /* Enable channels now */
+ reg = readl(&usbtll->channel_conf + port);
+
+ setbits_le32(®, (OMAP_TLL_CHANNEL_CONF_CHANMODE_TRANSPARENT_UTMI
+ | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
+ | OMAP_TLL_CHANNEL_CONF_DRVVBUS
+ | OMAP_TLL_CHANNEL_CONF_CHRGVBUS
+ | OMAP_TLL_CHANNEL_CONF_CHANEN));
+
+ writel(reg, &usbtll->channel_conf + port);
+}
+
+static void omap_ehci_soft_phy_reset(int port)
+{
+ struct ulpi_viewport ulpi_vp;
+
+ ulpi_vp.viewport_addr = (u32)&ehci->insreg05_utmi_ulpi;
+ ulpi_vp.port_num = port;
+
+ ulpi_reset(&ulpi_vp);
+}
+
inline int __board_usb_init(void)
{
return 0;
#endif
/* Reset is needed otherwise the kernel-driver will throw an error. */
-int ehci_hcd_stop(void)
+int omap_ehci_hcd_stop(void)
{
- debug("Resetting OMAP3 EHCI\n");
+ debug("Resetting OMAP EHCI\n");
omap_ehci_phy_reset(1, 0);
- writel(OMAP_UHH_SYSCONFIG_SOFTRESET,
- OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
- /* disable USB clocks */
- struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
- sr32(&prcm_base->iclken_usbhost, 0, 1, 0);
- sr32(&prcm_base->fclken_usbhost, 0, 2, 0);
- sr32(&prcm_base->iclken3_core, 2, 1, 0);
- sr32(&prcm_base->fclken3_core, 2, 1, 0);
+
+ if (omap_uhh_reset() < 0)
+ return -1;
+
+ if (omap_ehci_tll_reset() < 0)
+ return -1;
+
return 0;
}
/*
- * Initialize the OMAP3 EHCI controller and PHY.
- * Based on "drivers/usb/host/ehci-omap.c" from Linux 2.6.37.
+ * Initialize the OMAP EHCI controller and PHY.
+ * Based on "drivers/usb/host/ehci-omap.c" from Linux 3.1
* See there for additional Copyrights.
*/
-int ehci_hcd_init(void)
+int omap_ehci_hcd_init(struct omap_usbhs_board_data *usbhs_pdata)
{
int ret;
+ unsigned int i, reg = 0, rev = 0;
- debug("Initializing OMAP3 EHCI\n");
+ debug("Initializing OMAP EHCI\n");
ret = board_usb_init();
if (ret < 0)
/* Put the PHY in RESET */
omap_ehci_phy_reset(1, 10);
- struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
- /* Enable USBHOST_L3_ICLK (USBHOST_MICLK) */
- sr32(&prcm_base->iclken_usbhost, 0, 1, 1);
- /*
- * Enable USBHOST_48M_FCLK (USBHOST_FCLK1)
- * and USBHOST_120M_FCLK (USBHOST_FCLK2)
- */
- sr32(&prcm_base->fclken_usbhost, 0, 2, 3);
- /* Enable USBTTL_ICLK */
- sr32(&prcm_base->iclken3_core, 2, 1, 1);
- /* Enable USBTTL_FCLK */
- sr32(&prcm_base->fclken3_core, 2, 1, 1);
- debug("USB clocks enabled\n");
+ ret = omap_uhh_reset();
+ if (ret < 0)
+ return ret;
- /* perform TLL soft reset, and wait until reset is complete */
- writel(OMAP_USBTLL_SYSCONFIG_SOFTRESET,
- OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
- /* Wait for TLL reset to complete */
- while (!(readl(OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSSTATUS)
- & OMAP_USBTLL_SYSSTATUS_RESETDONE))
- ;
- debug("TLL reset done\n");
+ ret = omap_ehci_tll_reset();
+ if (ret)
+ return ret;
writel(OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
- OMAP_USBTLL_SYSCONFIG_CACTIVITY,
- OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
+ OMAP_USBTLL_SYSCONFIG_CACTIVITY, &usbtll->sysc);
/* Put UHH in NoIdle/NoStandby mode */
- writel(OMAP_UHH_SYSCONFIG_ENAWAKEUP
- | OMAP_UHH_SYSCONFIG_SIDLEMODE
- | OMAP_UHH_SYSCONFIG_CACTIVITY
- | OMAP_UHH_SYSCONFIG_MIDLEMODE,
- OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
-
- /* setup burst configurations */
- writel(OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
- | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
- | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN,
- OMAP3_UHH_BASE + OMAP_UHH_HOSTCONFIG);
+ writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+
+ /* setup ULPI bypass and burst configurations */
+ clrsetbits_le32(®, OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN,
+ (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN |
+ OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN |
+ OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN));
+
+ rev = readl(&uhh->rev);
+ if (rev == OMAP_USBHS_REV1) {
+ if (is_ehci_phy_mode(usbhs_pdata->port_mode[0]))
+ clrbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS);
+ else
+ setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS);
+
+ if (is_ehci_phy_mode(usbhs_pdata->port_mode[1]))
+ clrbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS);
+ else
+ setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS);
+
+ if (is_ehci_phy_mode(usbhs_pdata->port_mode[2]))
+ clrbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS);
+ else
+ setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS);
+ } else if (rev == OMAP_USBHS_REV2) {
+ clrsetbits_le32(®, (OMAP_P1_MODE_CLEAR | OMAP_P2_MODE_CLEAR),
+ OMAP4_UHH_HOSTCONFIG_APP_START_CLK);
+
+ /* Clear port mode fields for PHY mode*/
+
+ if (is_ehci_hsic_mode(usbhs_pdata->port_mode[0]))
+ setbits_le32(®, OMAP_P1_MODE_HSIC);
+
+ if (is_ehci_hsic_mode(usbhs_pdata->port_mode[1]))
+ setbits_le32(®, OMAP_P2_MODE_HSIC);
+
+ if (is_ehci_hsic_mode(usbhs_pdata->port_mode[2]))
+ setbits_le32(®, OMAP_P3_MODE_HSIC);
+ }
+
+ debug("OMAP UHH_REVISION 0x%x\n", rev);
+ writel(reg, &uhh->hostconfig);
+
+ for (i = 0; i < OMAP_HS_USB_PORTS; i++)
+ if (is_ehci_hsic_mode(usbhs_pdata->port_mode[i]))
+ omap_usbhs_hsic_init(i);
omap_ehci_phy_reset(0, 10);
- hccr = (struct ehci_hccr *)(OMAP3_EHCI_BASE);
- hcor = (struct ehci_hcor *)(OMAP3_EHCI_BASE + 0x10);
+ /*
+ * An undocumented "feature" in the OMAP3 EHCI controller,
+ * causes suspended ports to be taken out of suspend when
+ * the USBCMD.Run/Stop bit is cleared (for example when
+ * we do ehci_bus_suspend).
+ * This breaks suspend-resume if the root-hub is allowed
+ * to suspend. Writing 1 to this undocumented register bit
+ * disables this feature and restores normal behavior.
+ */
+ writel(EHCI_INSNREG04_DISABLE_UNSUSPEND, &ehci->insreg04);
+
+ for (i = 0; i < OMAP_HS_USB_PORTS; i++)
+ if (is_ehci_phy_mode(usbhs_pdata->port_mode[i]))
+ omap_ehci_soft_phy_reset(i);
+
+ dcache_disable();
+ hccr = (struct ehci_hccr *)(OMAP_EHCI_BASE);
+ hcor = (struct ehci_hcor *)(OMAP_EHCI_BASE + 0x10);
- debug("OMAP3 EHCI init done\n");
+ debug("OMAP EHCI init done\n");
return 0;
}
projects / u-boot / commitdiff