]> git.sur5r.net Git - u-boot/commitdiff
ARM: at91: ma5d4: Swap SD/MMC controller order
authorMarek Vasut <marex@denx.de>
Tue, 2 May 2017 18:27:45 +0000 (20:27 +0200)
committerTom Rini <trini@konsulko.com>
Thu, 29 Jun 2017 17:30:50 +0000 (13:30 -0400)
The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which
is the version available on the market. Swap the controller order
to match this and future versions of the SoM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
board/aries/ma5d4evk/ma5d4evk.c
include/configs/ma5d4evk.h

index 9c1ba581668383a8d63bf4e1ecd34bee463d06f2..0293b29d0ea628784e87ed5515d70c293f59a78a 100644 (file)
@@ -205,14 +205,13 @@ int board_mmc_init(bd_t *bis)
        at91_set_pio_output(AT91_PIO_PORTE, 15, 1);
        at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
 
-       ret = atmel_mci_init((void *)ATMEL_BASE_MCI0);
+       ret = atmel_mci_init((void *)ATMEL_BASE_MCI1);
        if (ret)        /* eMMC init failed, skip it. */
                at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
 
        /* Enable the power supply to On-board MicroSD */
        at91_set_pio_output(AT91_PIO_PORTE, 17, 0);
-
-       ret = atmel_mci_init((void *)ATMEL_BASE_MCI1);
+       ret = atmel_mci_init((void *)ATMEL_BASE_MCI0);
        if (ret)        /* uSD init failed, power it down. */
                at91_set_pio_output(AT91_PIO_PORTE, 17, 1);
 
index 4bcbf2cb13ae9053547316aa1586c11f119eae23..0bb1ebb2f9bc0cd2ee3ca797e607e231d07b02b9 100644 (file)
        "consdev=ttyS3\0"                                               \
        "baudrate=115200\0"                                             \
        "bootscript=boot.scr\0"                                         \
-       "bootdev=/dev/mmcblk1p1\0"                                      \
-       "bootpart=1:1\0"                                                \
-       "rootdev=/dev/mmcblk1p2\0"                                      \
+       "bootdev=/dev/mmcblk0p1\0"                                      \
+       "bootpart=0:1\0"                                                \
+       "rootdev=/dev/mmcblk0p2\0"                                      \
        "netdev=eth0\0"                                                 \
        "dfu_alt_info=mmc raw 0 3867148288\0"                           \
        "kernel_addr_r=0x22000000\0"                                    \
                "bootm ${kernel_addr_r}\0"                              \
        "try_bootscript="                                               \
                "mmc rescan;"                                           \
-               "if test -e mmc ${bootpart} ${bootscript} ; then "      \
-               "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
+               "if test -e mmc 1:1 ${bootscript} ; then "              \
+               "if load mmc 1:1 ${kernel_addr_r} ${bootscript};"       \
                "then ; "                                               \
                        "echo Running bootscript... ; "                 \
                        "source ${kernel_addr_r} ; "                    \