--- /dev/null
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ */
+
+PIC32MZ[DA] Starter Kit
+----------------------------------------
+PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller.
+This family is powered by MIPS M14KEC 32bit general purpose core and has
+advanced microcontroller features and peripherals.
+
+This processor boots with proprietary stage1 bootloader running from internal
+boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed
+on internal program-flash. Finally U-Boot loads OS image (along with other
+required files for booting) from either uSD card, or ethernet, or from USB
+storage.
+
+To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot
+environment file), uImage, *.dtb (platform device-tree-blob file).
+
+U-Boot jumps to Linux using UHI specification.
+
+Visit http://microchip.com for details.
--- /dev/null
+/*
+ * Microchip PIC32MZ[DA] Starter Kit board
+ *
+ * Copyright (C) 2015, Microchip Technology Inc.
+ * Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <clk.h>
+#include <mach/pic32.h>
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ ulong rate = 0;
+ struct udevice *dev;
+
+ printf("Core: %s\n", get_core_name());
+
+ if (!uclass_get_device(UCLASS_CLK, 0, &dev)) {
+ rate = clk_get_rate(dev);
+ printf("CPU Speed: %lu MHz\n", rate / 1000000);
+ }
+
+ return 0;
+}
+#endif
--- /dev/null
+CONFIG_MIPS=y
+CONFIG_SYS_MALLOC_F_LEN=0x600
+CONFIG_DM_SERIAL=y
+CONFIG_DM_GPIO=y
+CONFIG_MACH_PIC32=y
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_DEFAULT_DEVICE_TREE="pic32mzda_sk"
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="dask # "
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_SAVEENV is not set
+CONFIG_LOOPW=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_TIME=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_FULL is not set
+CONFIG_SYS_VSNPRINTF=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_REGEX=y
+CONFIG_CMD_DHRYSTONE=y
--- /dev/null
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Microchip PIC32MZ[DA] Starter Kit.
+ */
+
+#ifndef __PIC32MZDASK_CONFIG_H
+#define __PIC32MZDASK_CONFIG_H
+
+/* System Configuration */
+#define CONFIG_SYS_TEXT_BASE 0x9d004000 /* .text */
+#define CONFIG_DISPLAY_BOARDINFO
+
+/*--------------------------------------------
+ * CPU configuration
+ */
+/* CPU Timer rate */
+#define CONFIG_SYS_MIPS_TIMER_FREQ 100000000
+
+/* Cache Configuration */
+#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
+
+/*----------------------------------------------------------------------
+ * Memory Layout
+ */
+#define CONFIG_SYS_SRAM_BASE 0x80000000
+#define CONFIG_SYS_SRAM_SIZE 0x00080000 /* 512K */
+
+/* Initial RAM for temporary stack, global data */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
+#define CONFIG_SYS_INIT_RAM_ADDR \
+ (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1)
+
+/* SDRAM Configuration (for final code, data, stack, heap) */
+#define CONFIG_SYS_SDRAM_BASE 0x88000000
+#define CONFIG_SYS_MALLOC_LEN (256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10)
+#define CONFIG_STACKSIZE (4 << 10) /* regular stack */
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (192 << 10)
+
+#define CONFIG_SYS_LOAD_ADDR 0x88500000 /* default load address */
+#define CONFIG_SYS_ENV_ADDR 0x88300000
+
+/* Memory Test */
+#define CONFIG_SYS_MEMTEST_START 0x88000000
+#define CONFIG_SYS_MEMTEST_END 0x88080000
+
+/*----------------------------------------------------------------------
+ * Commands
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_CMD_CLK
+
+/*-------------------------------------------------
+ * FLASH configuration
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*------------------------------------------------------------
+ * Console Configuration
+ */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_CMDLINE_EDITING 1
+
+/*
+ * Handover flattened device tree (dtb file) to Linux kernel
+ */
+#define CONFIG_OF_LIBFDT 1
+
+/* -------------------------------------------------
+ * Environment
+ */
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x4000
+
+/* ---------------------------------------------------------------------
+ * Board boot configuration
+ */
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#define CONFIG_BOOTDELAY 5 /* autoboot after X seconds */
+#undef CONFIG_BOOTARGS
+
+#endif /* __PIC32MZDASK_CONFIG_H */
projects / u-boot / commitdiff