driver/ddr/fsl: Add built-in memory test for DDR4 driver

Add built-in memory test to catch errors after DDR is initialized, before
any other transactions. To enable this test, define CONFIG_FSL_DDR_BIST.
An environmental variable "ddr_bist" is checked before starting test.
It takes a while (several seconds) depending on system memory size.

Signed-off-by: York Sun <yorksun@freescale.com>

diff --git a/README b/README
index d33f3b5fef91e7bfde103308bbc8d5ed7f7a77fe..f5a719db9d3a43e0bf7e45a20e8362fc207cd770 100644 (file)
--- a/README
+++ b/README
@@ -4884,6 +4884,9 @@ Low Level (hardware related) configuration options:
 - CONFIG_FSL_DDR_SYNC_REFRESH
                Enable sync of refresh for multiple controllers.
 
+- CONFIG_FSL_DDR_BIST
+               Enable built-in memory test for Freescale DDR controllers.
+
 - CONFIG_SYS_83XX_DDR_USES_CS0
                Only for 83xx systems. If specified, then DDR should
                be configured using CS0 and CS1 instead of CS2 and CS3.

diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c
index d9fce7d2f34b9308fd98de77d5e3a457e253ddd3..1d679830659d43dc124d4f8842d9b5932bae4b55 100644 (file)
--- a/drivers/ddr/fsl/fsl_ddr_gen4.c
+++ b/drivers/ddr/fsl/fsl_ddr_gen4.c
@@ -36,6 +36,13 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
        defined(CONFIG_SYS_FSL_ERRATUM_A008514)
        u32 *eddrtqcr1;
 #endif
+#ifdef CONFIG_FSL_DDR_BIST
+       u32 mtcr, err_detect, err_sbe;
+       u32 cs0_bnds, cs1_bnds, cs2_bnds, cs3_bnds, cs0_config;
+#endif
+#ifdef CONFIG_FSL_DDR_BIST
+       char buffer[CONFIG_SYS_CBSIZE];
+#endif
 
        switch (ctrl_num) {
        case 0:
@@ -309,4 +316,70 @@ step2:
                ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
        }
 #endif
+
+#ifdef CONFIG_FSL_DDR_BIST
+#define BIST_PATTERN1  0xFFFFFFFF
+#define BIST_PATTERN2  0x0
+#define BIST_CR                0x80010000
+#define BIST_CR_EN     0x80000000
+#define BIST_CR_STAT   0x00000001
+#define CTLR_INTLV_MASK        0x20000000
+       /* Perform build-in test on memory. Three-way interleaving is not yet
+        * supported by this code. */
+       if (getenv_f("ddr_bist", buffer, CONFIG_SYS_CBSIZE) >= 0) {
+               puts("Running BIST test. This will take a while...");
+               cs0_config = ddr_in32(&ddr->cs0_config);
+               if (cs0_config & CTLR_INTLV_MASK) {
+                       cs0_bnds = ddr_in32(&cs0_bnds);
+                       cs1_bnds = ddr_in32(&cs1_bnds);
+                       cs2_bnds = ddr_in32(&cs2_bnds);
+                       cs3_bnds = ddr_in32(&cs3_bnds);
+                       /* set bnds to non-interleaving */
+                       ddr_out32(&cs0_bnds, (cs0_bnds & 0xfffefffe) >> 1);
+                       ddr_out32(&cs1_bnds, (cs1_bnds & 0xfffefffe) >> 1);
+                       ddr_out32(&cs2_bnds, (cs2_bnds & 0xfffefffe) >> 1);
+                       ddr_out32(&cs3_bnds, (cs3_bnds & 0xfffefffe) >> 1);
+               }
+               ddr_out32(&ddr->mtp1, BIST_PATTERN1);
+               ddr_out32(&ddr->mtp2, BIST_PATTERN1);
+               ddr_out32(&ddr->mtp3, BIST_PATTERN2);
+               ddr_out32(&ddr->mtp4, BIST_PATTERN2);
+               ddr_out32(&ddr->mtp5, BIST_PATTERN1);
+               ddr_out32(&ddr->mtp6, BIST_PATTERN1);
+               ddr_out32(&ddr->mtp7, BIST_PATTERN2);
+               ddr_out32(&ddr->mtp8, BIST_PATTERN2);
+               ddr_out32(&ddr->mtp9, BIST_PATTERN1);
+               ddr_out32(&ddr->mtp10, BIST_PATTERN2);
+               mtcr = BIST_CR;
+               ddr_out32(&ddr->mtcr, mtcr);
+               timeout = 100;
+               while (timeout > 0 && (mtcr & BIST_CR_EN)) {
+                       mdelay(1000);
+                       timeout--;
+                       mtcr = ddr_in32(&ddr->mtcr);
+               }
+               if (timeout <= 0)
+                       puts("Timeout\n");
+               else
+                       puts("Done\n");
+               err_detect = ddr_in32(&ddr->err_detect);
+               err_sbe = ddr_in32(&ddr->err_sbe);
+               if (mtcr & BIST_CR_STAT) {
+                       printf("BIST test failed on controller %d.\n",
+                              ctrl_num);
+               }
+               if (err_detect || (err_sbe & 0xffff)) {
+                       printf("ECC error detected on controller %d.\n",
+                              ctrl_num);
+               }
+
+               if (cs0_config & CTLR_INTLV_MASK) {
+                       /* restore bnds registers */
+                       ddr_out32(&cs0_bnds, cs0_bnds);
+                       ddr_out32(&cs1_bnds, cs1_bnds);
+                       ddr_out32(&cs2_bnds, cs2_bnds);
+                       ddr_out32(&cs3_bnds, cs3_bnds);
+               }
+       }
+#endif
 }