bool "Support sunxi (Allwinner) SoCs"
select DM
select DM_GPIO
+ select DM_ETH
+ select DM_SERIAL
+ select DM_USB if !USB_MUSB_SUNXI
select OF_CONTROL
select OF_SEPARATE
select SPL_DISABLE_OF_CONTROL
+ select USB
config TARGET_SNOWBALL
bool "Support snowball"
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_VIDEO_LCD_SPI_CS="PA0"
CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
CONFIG_VIDEO_LCD_SPI_MOSI="PA2"
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
CONFIG_VIDEO_LCD_SPI_SCLK="PH10"
CONFIG_VIDEO_LCD_SPI_MOSI="PH11"
CONFIG_VIDEO_LCD_SPI_MISO="PH12"
-CONFIG_USB=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DCDC1_VOLT=3300
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DCDC1_VOLT=3300
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,USB_EHCI,STATUSLED=234"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,STATUSLED=234"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DCDC1_VOLT=3300
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB=y
-CONFIG_DM_USB=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,MACPWR=SUNXI_GPH(19)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(19)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y