include/configs: Use new CONFIG_CMD_* in various s* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 97b52fa1ae7940ad00c89dd424853e510a4755ae..dc25831288472d66e0de968dada935ca7083dd24 100644 (file)
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -502,31 +502,28 @@
  */
 #define CONFIG_VERSION_VARIABLE
 
-/* What U-Boot subsytems do you want enabled? */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_KGDB
+
 #ifdef CONFIG_ETHER_ON_FCC
-# define CONFIG_COMMANDS       (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_SPI     | \
-                               CFG_CMD_SDRAM   | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_IMMAP   | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_MII     )
-#else
-# define CONFIG_COMMANDS       (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_SPI     | \
-                               CFG_CMD_SDRAM   | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_IMMAP   | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_PING    )
-#endif /* CONFIG_ETHER_ON_FCC */
+#define CONFIG_CMD_MII
+#endif
+
 
 /* Where do the internal registers live? */
 #define CFG_IMMR               0xF0000000
@@ -544,10 +541,6 @@
 #define CONFIG_SACSng          1       /* munged for the SACSng */
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-
 /*
  * Miscellaneous configurable options
  */
@@ -589,7 +582,7 @@
 #define CFG_TFTP_TIMEOUT_COUNT 5        /* How many timeouts TFTP will allow */
                                        /* before it gives up.               */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CBSIZE           1024    /* Console I/O Buffer Size           */
 #else
 #  define CFG_CBSIZE           256     /* Console I/O Buffer Size           */
@@ -732,7 +725,7 @@
  */
 #define CFG_CACHELINE_SIZE     32      /* For MPC8260 CPU */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 # define CFG_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 #endif
 

diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index e4357b088542a4ea7052c0b8c1b288639bcf223b..578ef80aa62b66f0f146fa1a0395459b0f974c52 100644 (file)
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -169,25 +169,27 @@
 #define CONFIG_MII 1                   /* add 405GP MII PHY management         */
 #define CONFIG_PHY_ADDR 1      /* the connected Phy defaults to address 1 */
 
-#define CONFIG_COMMANDS          \
-          (CONFIG_CMD_DFL      | \
-                       CFG_CMD_AUTOSCRIPT      | \
-                       CFG_CMD_PCI             | \
-                       CFG_CMD_IRQ             | \
-                       CFG_CMD_NET             | \
-                       CFG_CMD_MII             | \
-                       CFG_CMD_PING            | \
-                       CFG_CMD_NAND            | \
-                       CFG_CMD_JFFS2           | \
-                       CFG_CMD_I2C             | \
-                       CFG_CMD_IDE             | \
-                       CFG_CMD_DATE            | \
-                       CFG_CMD_DHCP            | \
-                       CFG_CMD_CACHE           | \
-                       CFG_CMD_ELF     )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ELF
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -277,7 +279,7 @@
  * External peripheral base address
  *-----------------------------------------------------------------------
  */
-#if !(CONFIG_COMMANDS & CFG_CMD_IDE)
+#if !defined(CONFIG_CMD_IDE)
 
 #undef CONFIG_IDE_LED                  /* no led for ide supported     */
 #undef CONFIG_IDE_RESET                /* no reset for ide supported   */
@@ -286,7 +288,7 @@
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
-#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#else
 #define CONFIG_START_IDE       1       /* check, if use IDE */
 
 #undef CONFIG_IDE_8xx_DIRECT           /* no pcmcia interface required */
@@ -346,7 +348,7 @@
 
 #endif /* IDE_USES_ISA_EMULATION */
 
-#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */
+#endif
 
 /*
 #define        CFG_KEY_REG_BASE_ADDR   0xF0100000
@@ -437,7 +439,7 @@ extern unsigned long offsetOfEnvironment;
 
 #define CFG_CACHELINE_SIZE 32
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
  #define CFG_CACHELINE_SHIFT   5       /* log base 2 of the above value        */
 #endif
 

diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index 8b2ec077bd94e167c40018c3cdc3fc48beeb6faa..1001342a0595d3cca53f146d7b9132311c2acf4b 100644 (file)
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -67,16 +67,25 @@
 
 #define CONFIG_BAUDRATE                9600
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_EEPROM
+
+
 
 #define CONFIG_BOOTDELAY       15
 #define CONFIG_BOOTARGS        "root=/dev/mtdblock0 console=ttyS0,9600"
 /* #define CONFIG_BOOTCOMMAND  "bootm 38000000" */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif

diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index a8e355508b1cb7f85371a08eaa2320147912edc7..e761ca7b55bc4542d12f8a0ca934dc73ec244364 100644 (file)
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -64,16 +64,25 @@
 
 #define CONFIG_BAUDRATE                9600
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_PCMCIA | CFG_CMD_EEPROM)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_EEPROM
+
 
 #define CONFIG_BOOTDELAY       15
 #define CONFIG_BOOTARGS        "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
 #define CONFIG_BOOTCOMMAND     "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif

diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index a4249c47c6251017f72eb73fec1acfaa384cc92c..489c35ff4b4c410379f88ce1a7acc2ec2e9066a8 100644 (file)
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -36,20 +36,18 @@
 
 
 /*
- * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
- * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
- * functionality or size of u-boot code.
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL         \
-                               & ~CFG_CMD_LOADS        \
-                               & ~CFG_CMD_CONSOLE      \
-                               & ~CFG_CMD_AUTOSCRIPT   \
-                               | CFG_CMD_NET           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_DHCP          \
-                               )
-
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_AUTOSCRIPT
+
 
 /*
  * Boot options. Setting delay to -1 stops autostart count down.

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 44bc955519485c35a6ede2997a5639593544c6c6..14a64e8c3fc939c4a08238abb8b0fdad6fee27a7 100644 (file)
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -299,9 +299,6 @@
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
 
-#define CMD_USB                        CFG_CMD_USB
-#else
-#define CMD_USB                        0       /* no USB on 440GRx             */
 #endif /* CONFIG_440EPX */
 
 /* Partitions */
@@ -309,25 +306,34 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
-#define CONFIG_COMMANDS       (CONFIG_CMD_DFL  |       \
-                              CFG_CMD_ASKENV   |       \
-                              CFG_CMD_DHCP     |       \
-                              CFG_CMD_DTT      |       \
-                              CFG_CMD_DIAG     |       \
-                              CFG_CMD_EEPROM   |       \
-                              CFG_CMD_ELF      |       \
-                              CFG_CMD_FAT      |       \
-                              CFG_CMD_I2C      |       \
-                              CFG_CMD_IRQ      |       \
-                              CFG_CMD_MII      |       \
-                              CFG_CMD_NAND     |       \
-                              CFG_CMD_NET      |       \
-                              CFG_CMD_NFS      |       \
-                              CFG_CMD_PCI      |       \
-                              CFG_CMD_PING     |       \
-                              CFG_CMD_REGINFO  |       \
-                              CFG_CMD_SDRAM    |       \
-                              CMD_USB)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+#ifdef CONFIG_440EPX
+#define CONFIG_CMD_USB
+#endif
+
 
 /* POST support */
 #define CONFIG_POST            (CFG_POST_MEMORY   | \
@@ -343,15 +349,12 @@
 
 #define CONFIG_SUPPORT_VFAT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size      */
@@ -441,7 +444,7 @@
  *----------------------------------------------------------------------*/
 #define CFG_DCACHE_SIZE                (32<<10)  /* For AMCC 440 CPUs                  */
 #define CFG_CACHELINE_SIZE     32            /* ...                                */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5             /* log base 2 of the above value  */
 #endif
 
@@ -453,7 +456,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2           /* which serial port to use */
 #endif

diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index 572985b051bb3705eacce97043aab5b30d4fe1e0..cad38d0c00d179ae2cd4c61c3209224079e78d44 100644 (file)
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -66,21 +66,19 @@
 
 #define CONFIG_BAUDRATE                115200
 
-#if 0 /* XXX - cannot test IDE anyway, so disabled for now - wd */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_PCMCIA | \
-                                CFG_CMD_IDE)
-#endif /* 0 */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 
 #define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTARGS        "root=ramfs devfs=mount console=ttySA0,115200"
 #define CONFIG_NETMASK          255.255.0.0
 #define CONFIG_BOOTCOMMAND     "help"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif

diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index a137f9d7c999cc753b88fec6a23076aa7aca35f0..22e69725b37145adfc6730d2821d333ec7bf671f 100644 (file)
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -86,24 +86,23 @@
 /* Use s3c2400's RTC */
 #define CONFIG_RTC_S3C24X0     1
 
-#ifndef USE_920T_MMU
-#define CONFIG_COMMANDS_tmp    ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_SNTP    )
-#else
-#define CONFIG_COMMANDS_tmp    (CONFIG_CMD_DFL | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_SNTP    )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_HWFLOW)
+    #define CONFIG_CONFIG_HWFLOW
 #endif
 
-#ifdef CONFIG_HWFLOW
-#define CONFIG_COMMANDS                (CONFIG_COMMANDS_tmp | CFG_CMD_HWFLOW)
-#else
-#define CONFIG_COMMANDS                CONFIG_COMMANDS_tmp
+#if !defined(USE_920T_MMU)
+    #undef CONFIG_CMD_CACHE
 #endif
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY       3
 #if 0
@@ -118,7 +117,7 @@
 #define CONFIG_BOOTCOMMAND     "tftp; bootm"
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX  1               /* which serial port to use */

diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index 7edec0db43d6ae437c40bd7d96f802460b01c668..cd3d32765472c8346ccd54504168b5a4f16ed5f7 100644 (file)
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -72,22 +72,17 @@
 
 #define CONFIG_BAUDRATE                115200
 
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
-                       (CONFIG_CMD_DFL  | \
-                       CFG_CMD_CACHE    | \
-                       /*CFG_CMD_NAND   |*/ \
-                       /*CFG_CMD_EEPROM |*/ \
-                       /*CFG_CMD_I2C    |*/ \
-                       /*CFG_CMD_USB    |*/ \
-                       CFG_CMD_REGINFO  | \
-                       CFG_CMD_DATE     | \
-                       CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+
 
 #define CONFIG_BOOTDELAY       3
 /*#define CONFIG_BOOTARGS      "root=ramfs devfs=mount console=ttySA0,9600" */
@@ -98,7 +93,7 @@
 /*#define CONFIG_BOOTFILE      "elinos-lart" */
 /*#define CONFIG_BOOTCOMMAND   "tftp; bootm" */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
 /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX  1               /* which serial port to use */

diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 185c2d48709b913bc08342e1956ae76f8f79bf6f..8d098579d79fef63a4c08c9fe69137816d036c3e 100644 (file)
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -42,11 +42,6 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM          0x02    /* Software reboot           */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -72,26 +67,25 @@
 #define CFG_CMD_POST_DIAG 0
 #endif
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_ECHO    | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_JFFS2   | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_POST_DIAG | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SNTP    )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_POST
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
 
 #define        CONFIG_TIMESTAMP                /* display image timestamps */
 
@@ -319,7 +313,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -338,6 +332,11 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
+#endif
+
 /*
  * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
  * which is normally part of the default commands (CFV_CMD_DFL)

diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index 4937638820b94047343f50e799205921f5a27630..e8f4cfac3ff4d401d183b1a1dd3df50ae4692f0f 100644 (file)
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -39,12 +39,6 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM          0x02    /* Software reboot      */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC8220 CPUs */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -69,30 +63,26 @@
 #define CONFIG_PCI_CFG_PHYS    CONFIG_PCI_CFG_BUS
 #define CONFIG_PCI_CFG_SIZE    0x01000000
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_BOOTD   | \
-                               CFG_CMD_CACHE   | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_DIAG    | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_NET     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SDRAM   | \
-                               CFG_CMD_SNTP    | \
-                               0)
-
-/*                     CFG_CMD_MII     | \ */
-/*                            CFG_CMD_USB      | \ */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 /*
  * Default Environment
@@ -268,7 +258,7 @@
  */
 #define CFG_LONGHELP                       /* undef to save memory     */
 #define CFG_PROMPT             "=> "       /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024        /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256         /* Console I/O Buffer Size  */
@@ -284,6 +274,11 @@
 
 #define CFG_HZ                 1000        /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC8220 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */

diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index 09bbebdce899407d9e390c77092e05682cde7b15..ea6a11237d2d06193c3569375e765da51b3123fe 100644 (file)
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -80,24 +80,24 @@
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 #define CONFIG_BZIP2    /* include support for bzip2 compressed images */
 
-#ifndef CONFIG_COMMANDS
-#define CONFIG_COMMANDS        (CONFIG_CMD_DFL   \
-                        | CFG_CMD_ASKENV \
-                        | CFG_CMD_DATE \
-                        | CFG_CMD_ECHO   \
-                        | CFG_CMD_IMMAP  \
-                        | CFG_CMD_JFFS2 \
-                        | CFG_CMD_PING \
-                        | CFG_CMD_DHCP \
-                        | CFG_CMD_I2C \
-                        | CFG_CMD_MII)
-                       /* & ~( CFG_CMD_NET)) */
 
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
 
-#endif /* !CONFIG_COMMANDS */
+#undef CONFIG_CMD_NET
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Miscellaneous configurable options
@@ -107,7 +107,7 @@
 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2    "> "
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE              1024            /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE              256             /* Console I/O Buffer Size      */
@@ -202,7 +202,7 @@
 /*-----------------------------------------------------------------------
  * I2C configuration
  */
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 /* enable I2C and select the hardware/software driver */
 #undef CONFIG_HARD_I2C                 /* I2C with hardware support    */
 #define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */

diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 9888d1110860cb5461286d52ae9944b958a824b9..e480df5f9c0e2b7983fc0c70e8a49ed5107564f6 100644 (file)
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -44,11 +44,6 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM          0x02    /* Software reboot           */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -88,12 +83,6 @@
 #define CONFIG_NS8382X         1
 #endif /* CONFIG_STK52XX */
 
-#ifdef CONFIG_PCI
-#define ADD_PCI_CMD            CFG_CMD_PCI
-#else
-#define ADD_PCI_CMD            0
-#endif
-
 /*
  * Video console
  */
@@ -110,12 +99,6 @@
 #define CFG_CONSOLE_IS_IN_ENV
 #endif
 
-#ifdef CONFIG_VIDEO
-#define ADD_BMP_CMD            CFG_CMD_BMP
-#else
-#define ADD_BMP_CMD            0
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -124,10 +107,7 @@
 /* USB */
 #ifdef CONFIG_STK52XX
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD            CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD            0
 #endif
 
 /* POST support */
@@ -143,36 +123,44 @@
 #define CFG_CMD_POST_DIAG 0
 #endif
 
-/* IDE */
-#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
-#define ADD_IDE_CMD            (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
-#else
-#define ADD_IDE_CMD            0
-#endif
 
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               ADD_BMP_CMD     | \
-                               ADD_IDE_CMD     | \
-                               ADD_PCI_CMD     | \
-                               ADD_USB_CMD     | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_ECHO    | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_POST_DIAG | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SNTP    )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
+    #define CONFIG_CMD_IDE
+    #define CONFIG_CMD_FAT
+    #define CONFIG_CMD_EXT2
+#endif
+
+#ifdef CONFIG_STK52XX
+    #define CONFIG_CMD_USB
+    #define CONFIG_CMD_FAT
+#endif
+
+#ifdef CONFIG_VIDEO
+    #define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_PCI
+    #define CONFIG_CMD_PCI
+#endif
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_POST
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
 
 #define        CONFIG_TIMESTAMP                /* display image timestamps */
 
@@ -406,7 +394,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -425,6 +413,11 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
+#endif
+
 /*
  * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
  * which is normally part of the default commands (CFV_CMD_DFL)

diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 82245558961906d58dec4484dbf536fe0892a22e..cb1a2e6a1a0b8632972c9c1ff8007a04b21e03c5 100644 (file)
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -55,10 +55,12 @@
 #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
 
-#define CONFIG_COMMANDS                (CONFIG__CMD_DFL)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
 
 #define CFG_UART1_BASE         (0xFFFF2000)
 #define CONFIG_SERIAL_BASE     CFG_UART1_BASE

diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 92ee8cb3331f961cdceb467ae582928292ec7f3e..0cd0219b80501d44d14177509e55ec69b327d861 100644 (file)
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -132,15 +132,18 @@
 
 #define        CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_DOC     | \
-/*                             CFG_CMD_IDE     |*/ \
-                               CFG_CMD_DATE    )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_DATE
+
+
 #define CFG_NAND_LEGACY
 
 /*
@@ -153,7 +156,7 @@
 #define CFG_PROMPT_HUSH_PS2     "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define        CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
 #define        CFG_CBSIZE      256             /* Console I/O Buffer Size      */
@@ -246,7 +249,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     16      /* For all MPC8xx CPUs                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    4       /* log base 2 of the above value        */
 #endif