bamboo PPC440EP
bunbinga PPC405EP
ebony PPC440GP
+ katmai PPC440SPe
ocotea PPC440GX
p3p440 PPC440GP
pcs440ep PPC440EP
CRAYL1 csb272 csb472 DASA_SIM \
DP405 DU405 ebony ERIC \
EXBITGEN G2000 HH405 HUB405 \
- JSE KAREF luan METROBOX \
- MIP405 MIP405T ML2 ml300 \
- ocotea OCRTC ORSG p3p440 \
- PCI405 pcs440ep PIP405 PLU405 \
- PMC405 PPChameleonEVB sbc405 sc3 \
- sequoia sequoia_nand taishan VOH405 \
- VOM405 W7OLMC W7OLMG walnut \
- WUH405 XPEDITE1K yellowstone yosemite \
- yucca \
+ JSE KAREF katmai luan \
+ METROBOX MIP405 MIP405T ML2 \
+ ml300 ocotea OCRTC ORSG \
+ p3p440 PCI405 pcs440ep PIP405 \
+ PLU405 PMC405 PPChameleonEVB sbc405 \
+ sc3 sequoia sequoia_nand taishan \
+ VOH405 VOM405 W7OLMC W7OLMG \
+ walnut WUH405 XPEDITE1K yellowstone \
+ yosemite yucca \
"
#########################################################################
KAREF_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
+katmai_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
+
luan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
--- /dev/null
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o cmd_katmai.o
+SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <asm/byteorder.h>
+
+static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ uchar chip;
+ ulong data;
+ int nbytes;
+ extern char console_buffer[];
+
+ char sysClock[4];
+ char cpuClock[4];
+ char plbClock[4];
+ char pcixClock[4];
+
+ if (argc < 3) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (strcmp(argv[2], "prom0") == 0)
+ chip = IIC0_BOOTPROM_ADDR;
+ else
+ chip = IIC0_ALT_BOOTPROM_ADDR;
+
+ do {
+ printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n");
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if ((strcmp(console_buffer, "33") != 0) &
+ (strcmp(console_buffer, "66") != 0))
+ nbytes=0;
+
+ strcpy(sysClock, console_buffer);
+
+ } while (nbytes == 0);
+
+ do {
+ if (strcmp(sysClock, "66") == 0) {
+ printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n");
+ } else {
+#ifdef CONFIG_STRESS
+ printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+#else
+ printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+#endif
+ }
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if (strcmp(sysClock, "66") == 0) {
+ if ((strcmp(console_buffer, "400") != 0) &
+ (strcmp(console_buffer, "533") != 0)
+#ifdef CONFIG_STRESS
+ & (strcmp(console_buffer, "667") != 0)
+#endif
+ ) {
+ nbytes = 0;
+ }
+ } else {
+ if ((strcmp(console_buffer, "400") != 0) &
+ (strcmp(console_buffer, "500") != 0) &
+ (strcmp(console_buffer, "533") != 0)
+#ifdef CONFIG_STRESS
+ & (strcmp(console_buffer, "667") != 0)
+#endif
+ ) {
+ nbytes = 0;
+ }
+ }
+
+ strcpy(cpuClock, console_buffer);
+
+ } while (nbytes == 0);
+
+ if (strcmp(cpuClock, "500") == 0)
+ strcpy(plbClock, "166");
+ else if (strcmp(cpuClock, "533") == 0)
+ strcpy(plbClock, "133");
+ else {
+ do {
+ if (strcmp(cpuClock, "400") == 0)
+ printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+
+#ifdef CONFIG_STRESS
+ if (strcmp(cpuClock, "667") == 0)
+ printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+
+#endif
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if (strcmp(cpuClock, "400") == 0) {
+ if ((strcmp(console_buffer, "100") != 0) &
+ (strcmp(console_buffer, "133") != 0))
+ nbytes = 0;
+ }
+#ifdef CONFIG_STRESS
+ if (strcmp(cpuClock, "667") == 0) {
+ if ((strcmp(console_buffer, "133") != 0) &
+ (strcmp(console_buffer, "166") != 0))
+ nbytes = 0;
+ }
+#endif
+ strcpy(plbClock, console_buffer);
+
+ } while (nbytes == 0);
+ }
+
+ do {
+ printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if ((strcmp(console_buffer, "33") != 0) &
+ (strcmp(console_buffer, "66") != 0) &
+ (strcmp(console_buffer, "100") != 0) &
+ (strcmp(console_buffer, "133") != 0)) {
+ nbytes = 0;
+ }
+ strcpy(pcixClock, console_buffer);
+
+ } while (nbytes == 0);
+
+ printf("\nsys clk = %sMhz\n", sysClock);
+ printf("cpu clk = %sMhz\n", cpuClock);
+ printf("plb clk = %sMhz\n", plbClock);
+ printf("Pci-X clk = %sMhz\n", pcixClock);
+
+ do {
+ printf("\npress [y] to write I2C bootstrap \n");
+ printf("or [n] to abort. \n");
+ printf("Don't forget to set board switches \n");
+ printf("according to your choice before re-starting \n");
+ printf("(refer to 440spe_uboot_kit_um_1_01.pdf) \n");
+
+ nbytes = readline (" ? ");
+ if (strcmp(console_buffer, "n") == 0)
+ return 0;
+
+ } while (nbytes == 0);
+
+ if (strcmp(sysClock, "33") == 0) {
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "100") == 0))
+ data = 0x8678c206;
+
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x8678c2c6;
+
+ if ((strcmp(cpuClock, "500") == 0))
+ data = 0x8778f2c6;
+
+ if ((strcmp(cpuClock, "533") == 0))
+ data = 0x87790252;
+
+#ifdef CONFIG_STRESS
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x87794256;
+
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "166") == 0))
+ data = 0x87794206;
+
+#endif
+ }
+ if (strcmp(sysClock, "66") == 0) {
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "100") == 0))
+ data = 0x84706206;
+
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x847062c6;
+
+ if ((strcmp(cpuClock, "533") == 0))
+ data = 0x85708206;
+
+#ifdef CONFIG_STRESS
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x8570a256;
+
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "166") == 0))
+ data = 0x8570a206;
+
+#endif
+ }
+
+#ifdef DEBUG
+ printf(" pin strap0 to write in i2c = %x\n", data);
+#endif /* DEBUG */
+
+ if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0)
+ printf("Error writing strap0 in %s\n", argv[2]);
+
+ if (strcmp(pcixClock, "33") == 0)
+ data = 0x00000701;
+
+ if (strcmp(pcixClock, "66") == 0)
+ data = 0x00000601;
+
+ if (strcmp(pcixClock, "100") == 0)
+ data = 0x00000501;
+
+ if (strcmp(pcixClock, "133") == 0)
+ data = 0x00000401;
+
+ if (strcmp(plbClock, "166") == 0)
+ data |= 0x05950000;
+ else
+ data |= 0x05A50000;
+
+#ifdef DEBUG
+ printf(" pin strap1 to write in i2c = %x\n", data);
+#endif /* DEBUG */
+
+ udelay(1000);
+ if (i2c_write(chip, 4, 1, (uchar *)&data, 4) != 0)
+ printf("Error writing strap1 in %s\n", argv[2]);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ bootstrap, 3, 1, do_bootstrap,
+ "bootstrap - program the serial device strap\n",
+ "wrclk [prom0|prom1] - program the serial device strap\n"
+ );
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMCC 440SPe Evaluation (Katmai) board
+#
+
+TEXT_BASE = 0xfffc0000
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm-ppc/mmu.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+
+/**************************************************************************
+ * TLB table for revA
+ *************************************************************************/
+ .globl tlbtabA
+tlbtabA:
+ tlbtab_start
+ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+ tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbtab_end
+
+/**************************************************************************
+ * TLB table for revB
+ *
+ * Notice: revB of the 440SPe chip is very strict about PLB real addresses
+ * and ranges to be mapped for config space: it seems to only work with
+ * d_nnnn_nnnn range (hangs the core upon config transaction attempts when
+ * set otherwise) while revA uses c_nnnn_nnnn.
+ *************************************************************************/
+ .globl tlbtabB
+tlbtabB:
+ tlbtab_start
+ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+ tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+
+ tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_ACE_BASE, SZ_1K, 0xE0000000, 4,AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbtab_end
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <asm-ppc/io.h>
+
+#include "katmai.h"
+#include "../cpu/ppc4xx/440spe_pcie.h"
+
+#undef PCIE_ENDPOINT
+/* #define PCIE_ENDPOINT 1 */
+
+int ppc440spe_init_pcie_rootport(int port);
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+
+int board_early_init_f (void)
+{
+ unsigned long mfr;
+ unsigned long pfc;
+
+ /*----------------------------------------------------------------------+
+ * Interrupt controller setup for the Katmai 440SPe Evaluation board.
+ *-----------------------------------------------------------------------+
+ *-----------------------------------------------------------------------+
+ * Interrupt | Source | Pol. | Sensi.| Crit. |
+ *-----------+-----------------------------------+-------+-------+-------+
+ * IRQ 00 | UART0 | High | Level | Non |
+ * IRQ 01 | UART1 | High | Level | Non |
+ * IRQ 02 | IIC0 | High | Level | Non |
+ * IRQ 03 | IIC1 | High | Level | Non |
+ * IRQ 04 | PCI0X0 MSG IN | High | Level | Non |
+ * IRQ 05 | PCI0X0 CMD Write | High | Level | Non |
+ * IRQ 06 | PCI0X0 Power Mgt | High | Level | Non |
+ * IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non |
+ * IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non |
+ * IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non |
+ * IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non |
+ * IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit |
+ * IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non |
+ * IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non |
+ * IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non |
+ * IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non |
+ * IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non |
+ * IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit |
+ * IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non |
+ * IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non |
+ * IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non |
+ * IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non |
+ * IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non |
+ * IRQ 23 | I2O Inbound Doorbell | High | Level | Non |
+ * IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non |
+ * IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non |
+ * IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non |
+ * IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non |
+ * IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non |
+ * IRQ 29 | GPT Down Count Timer | Rising| Edge | Non |
+ * IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non |
+ * IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. |
+ *------------------------------------------------------------------------
+ * IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non |
+ * IRQ 33 | MAL Serr | High | Level | Non |
+ * IRQ 34 | MAL Txde | High | Level | Non |
+ * IRQ 35 | MAL Rxde | High | Level | Non |
+ * IRQ 36 | DMC CE or DMC UE | High | Level | Non |
+ * IRQ 37 | EBC or UART2 | High |Lvl Edg| Non |
+ * IRQ 38 | MAL TX EOB | High | Level | Non |
+ * IRQ 39 | MAL RX EOB | High | Level | Non |
+ * IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non |
+ * IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non |
+ * IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non |
+ * IRQ 43 | L2 Cache | Risin | Edge | Non |
+ * IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non |
+ * IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non |
+ * IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non |
+ * IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non |
+ * IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non |
+ * IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non |
+ * IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non |
+ * IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non |
+ * IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non |
+ * IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non |
+ * IRQ 54 | DMA Error | High | Level | Non |
+ * IRQ 55 | DMA I2O Error | High | Level | Non |
+ * IRQ 56 | Serial ROM | High | Level | Non |
+ * IRQ 57 | PCIX0 Error | High | Edge | Non |
+ * IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non |
+ * IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non |
+ * IRQ 60 | EMAC0 Interrupt | High | Level | Non |
+ * IRQ 61 | EMAC0 Wake-up | High | Level | Non |
+ * IRQ 62 | Reserved | High | Level | Non |
+ * IRQ 63 | XOR | High | Level | Non |
+ *-----------------------------------------------------------------------
+ * IRQ 64 | PE0 AL | High | Level | Non |
+ * IRQ 65 | PE0 VPD Access | Risin | Edge | Non |
+ * IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non |
+ * IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non |
+ * IRQ 68 | PE0 TCR | High | Level | Non |
+ * IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non |
+ * IRQ 70 | PE0 DCR Error | High | Level | Non |
+ * IRQ 71 | Reserved | N/A | N/A | Non |
+ * IRQ 72 | PE1 AL | High | Level | Non |
+ * IRQ 73 | PE1 VPD Access | Risin | Edge | Non |
+ * IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non |
+ * IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non |
+ * IRQ 76 | PE1 TCR | High | Level | Non |
+ * IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non |
+ * IRQ 78 | PE1 DCR Error | High | Level | Non |
+ * IRQ 79 | Reserved | N/A | N/A | Non |
+ * IRQ 80 | PE2 AL | High | Level | Non |
+ * IRQ 81 | PE2 VPD Access | Risin | Edge | Non |
+ * IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non |
+ * IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non |
+ * IRQ 84 | PE2 TCR | High | Level | Non |
+ * IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non |
+ * IRQ 86 | PE2 DCR Error | High | Level | Non |
+ * IRQ 87 | Reserved | N/A | N/A | Non |
+ * IRQ 88 | External IRQ(5) | Progr | Progr | Non |
+ * IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non |
+ * IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non |
+ * IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non |
+ * IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non |
+ * IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non |
+ * IRQ 94 | Reserved | N/A | N/A | Non |
+ * IRQ 95 | Reserved | N/A | N/A | Non |
+ *-----------------------------------------------------------------------
+ * IRQ 96 | PE0 INTA | High | Level | Non |
+ * IRQ 97 | PE0 INTB | High | Level | Non |
+ * IRQ 98 | PE0 INTC | High | Level | Non |
+ * IRQ 99 | PE0 INTD | High | Level | Non |
+ * IRQ 100 | PE1 INTA | High | Level | Non |
+ * IRQ 101 | PE1 INTB | High | Level | Non |
+ * IRQ 102 | PE1 INTC | High | Level | Non |
+ * IRQ 103 | PE1 INTD | High | Level | Non |
+ * IRQ 104 | PE2 INTA | High | Level | Non |
+ * IRQ 105 | PE2 INTB | High | Level | Non |
+ * IRQ 106 | PE2 INTC | High | Level | Non |
+ * IRQ 107 | PE2 INTD | Risin | Edge | Non |
+ * IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non |
+ * IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non |
+ * IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non |
+ * IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non |
+ * IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non |
+ * IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non |
+ * IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non |
+ * IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non |
+ * IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non |
+ * IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non |
+ * IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non |
+ * IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non |
+ * IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non |
+ * IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non |
+ * IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non |
+ * IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non |
+ * IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non |
+ * IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non |
+ * IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non |
+ * IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non |
+ *-----------+-----------------------------------+-------+-------+-------+ */
+ /*-------------------------------------------------------------------------+
+ * Put UICs in PowerPC440SPemode.
+ * Initialise UIC registers. Clear all interrupts. Disable all interrupts.
+ * Set critical interrupt values. Set interrupt polarities. Set interrupt
+ * trigger levels. Make bit 0 High priority. Clear all interrupts again.
+ *------------------------------------------------------------------------*/
+ mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */
+ mtdcr (uic3er, 0x00000000); /* disable all interrupts */
+ mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical interrupts: */
+ mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities*/
+ mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */
+ mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (uic3sr, 0x00000000); /* clear all interrupts*/
+ mtdcr (uic3sr, 0xffffffff); /* clear all interrupts*/
+
+
+ mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
+ mtdcr (uic2er, 0x00000000); /* disable all interrupts*/
+ mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts*/
+ mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities*/
+ mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */
+ mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
+ mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
+
+ mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts*/
+ mtdcr (uic1er, 0x00000000); /* disable all interrupts*/
+ mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts*/
+ mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels*/
+ mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (uic1sr, 0x00000000); /* clear all interrupts*/
+ mtdcr (uic1sr, 0xffffffff); /* clear all interrupts*/
+
+ mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
+ mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted cascade to be checked */
+ mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical interrupts*/
+ mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities*/
+ mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */
+ mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (uic0sr, 0x00000000); /* clear all interrupts*/
+ mtdcr (uic0sr, 0xffffffff); /* clear all interrupts*/
+
+/* SDR0_MFR should be part of Ethernet init */
+ mfsdr (sdr_mfr, mfr);
+ mfr &= ~SDR0_MFR_ECS_MASK;
+/* mtsdr(sdr_mfr, mfr); */
+
+ /*
+ * Setup GPIO signalling per defines in katmai.h
+ */
+ pfc = PFC0_KATMAI;
+ mtsdr(SDR0_PFC0, pfc);
+
+ out32(GPIO0_OR_ADDR, GPIO_OR_KATMAI);
+ out32(GPIO0_ODR_ADDR, GPIO_ODR_KATMAI);
+ out32(GPIO0_TCR_ADDR, GPIO_TCR_KATMAI);
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ char *s = getenv("serial#");
+
+ printf("Board: Katmai - AMCC 440SPe Evaluation Board");
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return 0;
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) 0x00000000;
+ uint *pend = (uint *) 0x08000000;
+ uint *p;
+
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+ unsigned long strap;
+
+ /*-------------------------------------------------------------------+
+ * The katmai board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *-------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
+ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*-------------------------------------------------------------------+
+ * Disable everything
+ *-------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*-------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
+ * strapping options to not support sizes such as 128/256 MB.
+ *-------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+ out32r( PCIX0_BAR0, 0 );
+
+ /*-------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *-------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+#if defined(CONFIG_PCI)
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+int is_pci_host(struct pci_controller *hose)
+{
+ /* The katmai board is always configured as host. */
+ return 1;
+}
+
+static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
+
+void pcie_setup_hoses(void)
+{
+ struct pci_controller *hose;
+ int i, bus;
+
+ /*
+ * assume we're called after the PCIX hose is initialized, which takes
+ * bus ID 0 and therefore start numbering PCIe's from 1.
+ */
+ bus = 1;
+ for (i = 0; i <= 2; i++) {
+#ifdef PCIE_ENDPOINT
+ if (ppc440spe_init_pcie_endport(i)) {
+#else
+ if (ppc440spe_init_pcie_rootport(i)) {
+#endif
+ printf("PCIE%d: initialization failed\n", i);
+ continue;
+ }
+
+ hose = &pcie_hose[i];
+ hose->first_busno = bus;
+ hose->last_busno = bus;
+ bus++;
+
+ /* setup mem resource */
+ pci_set_region(hose->regions + 0,
+ CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+ CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+ CFG_PCIE_MEMSIZE,
+ PCI_REGION_MEM
+ );
+ hose->region_count = 1;
+ pci_register_hose(hose);
+
+#ifdef PCIE_ENDPOINT
+ ppc440spe_setup_pcie_endpoint(hose, i);
+ /*
+ * Reson for no scanning is endpoint can not generate
+ * upstream configuration accesses.
+ */
+#else
+ ppc440spe_setup_pcie_rootpoint(hose, i);
+ /*
+ * Config access can only go down stream
+ */
+ hose->last_busno = pci_hose_scan(hose);
+#endif
+ }
+}
+#endif /* defined(CONFIG_PCI) */
+
+int misc_init_f (void)
+{
+ uint reg;
+#if defined(CONFIG_STRESS)
+ uint i ;
+ uint disp;
+#endif
+
+ /* minimal init for PCIe */
+#if 0 /* test-only: test endpoint at some time, for now rootpoint only */
+ /* pci express 0 Endpoint Mode */
+ mfsdr(SDR0_PE0DLPSET, reg);
+ reg &= (~0x00400000);
+ mtsdr(SDR0_PE0DLPSET, reg);
+#else
+ /* pci express 0 Rootpoint Mode */
+ mfsdr(SDR0_PE0DLPSET, reg);
+ reg |= 0x00400000;
+ mtsdr(SDR0_PE0DLPSET, reg);
+#endif
+ /* pci express 1 Rootpoint Mode */
+ mfsdr(SDR0_PE1DLPSET, reg);
+ reg |= 0x00400000;
+ mtsdr(SDR0_PE1DLPSET, reg);
+ /* pci express 2 Rootpoint Mode */
+ mfsdr(SDR0_PE2DLPSET, reg);
+ reg |= 0x00400000;
+ mtsdr(SDR0_PE2DLPSET, reg);
+
+#if defined(CONFIG_STRESS)
+ /*
+ * All this setting done by linux only needed by stress an charac. test
+ * procedure
+ * PCIe 1 Rootpoint PCIe2 Endpoint
+ * PCIe 0 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level
+ */
+ for (i=0,disp=0; i<8; i++,disp+=3) {
+ mfsdr(SDR0_PE0HSSSET1L0+disp, reg);
+ reg |= 0x33000000;
+ mtsdr(SDR0_PE0HSSSET1L0+disp, reg);
+ }
+
+ /*PCIe 1 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level */
+ for (i=0,disp=0; i<4; i++,disp+=3) {
+ mfsdr(SDR0_PE1HSSSET1L0+disp, reg);
+ reg |= 0x33000000;
+ mtsdr(SDR0_PE1HSSSET1L0+disp, reg);
+ }
+
+ /*PCIE 2 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level */
+ for (i=0,disp=0; i<4; i++,disp+=3) {
+ mfsdr(SDR0_PE2HSSSET1L0+disp, reg);
+ reg |= 0x33000000;
+ mtsdr(SDR0_PE2HSSSET1L0+disp, reg);
+ }
+
+ reg = 0x21242222;
+ mtsdr(SDR0_PE2UTLSET1, reg);
+ reg = 0x11000000;
+ mtsdr(SDR0_PE2UTLSET2, reg);
+ /* pci express 1 Endpoint Mode */
+ reg = 0x00004000;
+ mtsdr(SDR0_PE2DLPSET, reg);
+
+ mtsdr(SDR0_UART1, 0x2080005a); /* patch for TG */
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return (ctrlc());
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __KATMAI_H_
+#define __KATMAI_H_
+
+/*----------------------------------------------------------------------------
+ * XX
+ * XXXX XX XXX XXX XXXX
+ * XX XX XX XX XX XX
+ * XX XXX XX XX XX XX XX
+ * XX XX XXXXX XX XX XX
+ * XXXX XX XXXX XXXX
+ * XXXX
+ *
+ * The 440SPe provices 32 bits of GPIO. By default all GPIO pins
+ * are disabled, and must be explicitly enabled by setting a
+ * bit in the SDR0_PFC0 indirect DCR. Each GPIO maps 1-to-1 with the
+ * corresponding bit in the SDR0_PFC0 register (note that bit numbers
+ * reflect the PowerPC convention where bit 0 is the most-significant
+ * bit).
+ *
+ * Katmai specific:
+ * RS232_RX_EN# is held HIGH during reset by hardware, keeping the
+ * RS232_CTS, DSR & DCD signals coming from the MAX3411 (U26) in
+ * Hi-Z condition. This prevents contention between the MAX3411 (U26)
+ * and 74CBTLV3125PG (U2) during reset.
+ *
+ * RS232_RX_EN# is connected as GPIO pin 30. Once the processor
+ * is released from reset, this pin must be configured as an output and
+ * then driven high to enable the receive signals from the UART transciever.
+ *----------------------------------------------------------------------------*/
+#define GPIO_ENABLE(gpio) (0x80000000 >> (gpio))
+
+#define PFC0_KATMAI GPIO_ENABLE(30)
+#define GPIO_OR_KATMAI GPIO_ENABLE(30) /* Drive all outputs low except GPIO 30 */
+#define GPIO_TCR_KATMAI GPIO_ENABLE(30)
+#define GPIO_ODR_KATMAI 0 /* Disable open drain for all outputs */
+
+#define GPIO0_OR_ADDR (CFG_PERIPHERAL_BASE + 0x700)
+#define GPIO0_TCR_ADDR (CFG_PERIPHERAL_BASE + 0x704)
+#define GPIO0_ODR_ADDR (CFG_PERIPHERAL_BASE + 0x718)
+#define GPIO0_IR_ADDR (CFG_PERIPHERAL_BASE + 0x71C)
+
+#endif /* __KATMAI_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/amcc/katmai/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
#endif
#if defined (CFG_EBC_CFG)
- mtebc(epcr, CFG_EBC_CFG);
+ mtebc(EBC0_CFG, CFG_EBC_CFG);
#endif
#if defined(CONFIG_WATCHDOG)
unsigned long m;
unsigned long prbdv0;
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_YUCCA)
unsigned long sys_freq;
unsigned long sys_per=0;
unsigned long msr;
/*-------------------------------------------------------------------------+
| Calculate the system clock speed from the period.
+-------------------------------------------------------------------------*/
- sys_freq=(ONE_BILLION/sys_per)*1000;
+ sys_freq = (ONE_BILLION / sys_per) * 1000;
#endif
/* Extract configured divisors */
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
/* Now calculate the individual clocks */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_YUCCA)
sysInfo->freqVCOMhz = (m * sys_freq) ;
#else
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
#endif
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_YUCCA)
/* Determine PCI Clock Period */
pci_clock_per = determine_pci_clock_per();
sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
#endif
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_YUCCA)
unsigned long determine_sysper(void)
{
unsigned int fpga_clocking_reg;
}
return(sys_per);
-
}
/*-------------------------------------------------------------------------+
/* execution will continue from the poweron */
/* vector of 0xfffffffc */
#endif /* CONFIG_405EP */
+
+#if defined(CONFIG_440)
+#define function_prolog(func_name) .text; \
+ .align 2; \
+ .globl func_name; \
+ func_name:
+#define function_epilog(func_name) .type func_name,@function; \
+ .size func_name,.-func_name
+
+/*----------------------------------------------------------------------------+
+| mttlb3.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb3)
+ TLBWE(4,3,2)
+ blr
+ function_epilog(mttlb3)
+
+/*----------------------------------------------------------------------------+
+| mftlb3.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb3)
+ TLBRE(3,3,2)
+ blr
+ function_epilog(mftlb3)
+
+/*----------------------------------------------------------------------------+
+| mttlb2.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb2)
+ TLBWE(4,3,1)
+ blr
+ function_epilog(mttlb2)
+
+/*----------------------------------------------------------------------------+
+| mftlb2.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb2)
+ TLBRE(3,3,1)
+ blr
+ function_epilog(mftlb2)
+
+/*----------------------------------------------------------------------------+
+| mttlb1.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb1)
+ TLBWE(4,3,0)
+ blr
+ function_epilog(mttlb1)
+
+/*----------------------------------------------------------------------------+
+| mftlb1.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb1)
+ TLBRE(3,3,0)
+ blr
+ function_epilog(mftlb1)
+#endif /* CONFIG_440 */
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * katmai.h - configuration for AMCC Katmai (440SPe)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_KATMAI 1 /* Board is Katmai */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_440 1 /* ... PPC440 family */
+#define CONFIG_440SPE 1 /* Specifc SPe support */
+#undef CFG_DRAM_TEST /* Disable-takes long time */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */
+
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xff000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */
+#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */
+
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
+#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+#define CFG_PCI_TARGBASE CFG_PCI_MEMBASE
+
+#define CFG_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */
+#define CFG_PCIE_MEMSIZE 0x01000000
+#define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */
+
+#define CFG_PCIE0_CFGBASE 0xc0000000
+#define CFG_PCIE0_XCFGBASE 0xc0000400
+#define CFG_PCIE1_CFGBASE 0xc0001000
+#define CFG_PCIE1_XCFGBASE 0xc0001400
+#define CFG_PCIE2_CFGBASE 0xc0002000
+#define CFG_PCIE2_XCFGBASE 0xc0002400
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
+
+#define CFG_ACE_BASE 0xe0000000 /* Xilinx ACE controller - Compact Flash */
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM 1
+#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CONFIG_SERIAL_MULTI 1
+#undef CONFIG_UART1_CONSOLE
+#undef CFG_EXT_SERIAL_CLOCK
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
+#define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses */
+#define IIC0_DIMM0_ADDR 0x51
+#define IIC0_DIMM1_ADDR 0x52
+#undef CONFIG_STRESS
+#undef ENABLE_ECC
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_SPD_BUS_NUM 0 /* The I2C bus for SPD */
+
+#define IIC0_BOOTPROM_ADDR 0x50
+#define IIC0_ALT_BOOTPROM_ADDR 0x54
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR (0x50)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T11 1
+#define CFG_RTC_BUS_NUM 1 /* The I2C bus for RTC */
+#define CFG_I2C_RTC_ADDR 0x68
+#define CFG_M41T11_BASE_YEAR 1900 /* play along with linux */
+
+/* I2C DTT */
+#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */
+#define CFG_DTT_BUS_NUM 1 /* The I2C bus for DTT */
+/*
+ * standard dtt sensor configuration - bottom bit will determine local or
+ * remote sensor of the ADM1021, the rest determines index into
+ * CFG_DTT_ADM1021 array below.
+ */
+#define CONFIG_DTT_SENSORS { 0, 1 }
+
+/*
+ * ADM1021 temp sensor configuration (see dtt/adm1021.c for details).
+ * there will be one entry in this array for each two (dummy) sensors in
+ * CONFIG_DTT_SENSORS.
+ *
+ * For Katmai board:
+ * - only one ADM1021
+ * - i2c addr 0x18
+ * - conversion rate 0x02 = 0.25 conversions/second
+ * - ALERT ouput disabled
+ * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
+ * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg
+ */
+#define CFG_DTT_ADM1021 { { 0x18, 0x02, 0, 1, 0, 85, 1, 0, 58} }
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=katmai\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=katmai/uImage\0" \
+ "kernel_addr=fff10000\0" \
+ "ramdisk_addr=fff20000\0" \
+ "initrd_high=30000000\0" \
+ "load=tftp 200000 katmai/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b ${fileaddr} fffc0000 ${filesize};" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ "kozio=bootm ffc60000\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_DTT | \
+ CFG_CMD_ELF | \
+ CFG_CMD_EXT2 | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
+#define CONFIG_HAS_ETH0
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_RESET_DELAY 1000
+#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+#define CONFIG_NET_MULTI /* needed for NetConsole */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
+#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT /* let board init pci target */
+#undef CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+/* #define CFG_PCI_SUBSYS_ID CFG_PCI_SUBSYS_DEVICEID */
+
+/*
+ * NETWORK Support (PCI):
+ */
+/* Support for Intel 82557/82559/82559ER chips. */
+#define CONFIG_EEPRO100
+
+/*-----------------------------------------------------------------------
+ * Xilinx System ACE support
+ *----------------------------------------------------------------------*/
+#define CONFIG_SYSTEMACE 1 /* Enable SystemACE support */
+#define CFG_SYSTEMACE_WIDTH 16 /* Data bus width is 16 */
+#define CFG_SYSTEMACE_BASE CFG_ACE_BASE
+#define CONFIG_DOS_PARTITION 1
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+
+/* Memory Bank 0 (Flash) initialization */
+#define CFG_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \
+ EBC_BXAP_TWT_ENCODE(7) | \
+ EBC_BXAP_BCE_DISABLE | \
+ EBC_BXAP_BCT_2TRANS | \
+ EBC_BXAP_CSN_ENCODE(0) | \
+ EBC_BXAP_OEN_ENCODE(0) | \
+ EBC_BXAP_WBN_ENCODE(0) | \
+ EBC_BXAP_WBF_ENCODE(0) | \
+ EBC_BXAP_TH_ENCODE(0) | \
+ EBC_BXAP_RE_DISABLED | \
+ EBC_BXAP_SOR_DELAYED | \
+ EBC_BXAP_BEM_WRITEONLY | \
+ EBC_BXAP_PEN_DISABLED)
+#define CFG_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) | \
+ EBC_BXCR_BS_16MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_16BIT)
+
+/* Memory Bank 1 (Xilinx System ACE controller) initialization */
+#define CFG_EBC_PB1AP 0x7F8FFE80
+#define CFG_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CFG_ACE_BASE) | \
+ EBC_BXCR_BS_1MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_16BIT)
+
+/*-------------------------------------------------------------------------
+ * Initialize EBC CONFIG -
+ * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
+ * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
+ *-------------------------------------------------------------------------*/
+#define CFG_EBC_CFG (EBC_CFG_LE_UNLOCK | \
+ EBC_CFG_PTD_ENABLE | \
+ EBC_CFG_RTC_16PERCLK | \
+ EBC_CFG_ATC_PREVIOUS | \
+ EBC_CFG_DTC_PREVIOUS | \
+ EBC_CFG_CTC_PREVIOUS | \
+ EBC_CFG_OEO_PREVIOUS | \
+ EBC_CFG_EMC_DEFAULT | \
+ EBC_CFG_PME_DISABLE | \
+ EBC_CFG_PR_16)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /*Initial Memory map for Linux*/
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+#endif /* __CONFIG_H */
#define pbesr0 0x21 /* periph bus error status reg 0 */
#define pbesr1 0x22 /* periph bus error status reg 1 */
#define epcr 0x23 /* external periph control reg */
+#define EBC0_CFG 0x23 /* external bus configuration reg */
#ifdef CONFIG_405EP
/******************************************************************************
#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
-#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */
+#define SDRAM_MCSTAT_SRMS_MASK 0x40000000 /* Mem self refresh stat mask */
#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
-#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */
+#define SDRAM_MCSTAT_SRMS_SF 0x40000000 /* Mem in self refresh */
+#define SDRAM_MCSTAT_IDLE_MASK 0x20000000 /* Mem self refresh stat mask */
+#define SDRAM_MCSTAT_IDLE_NOT 0x00000000 /* Mem contr not idle */
+#define SDRAM_MCSTAT_IDLE 0x20000000 /* Mem contr idle */
/*-----------------------------------------------------------------------------+
| Memory Controller Options 1
#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
#define SDRAM_WRDTR_WTR_MASK 0x0E000000
#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
+#define SDRAM_WRDTR_WTR_90_DEG_ADV 0x04000000
#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
#define pbear 0x20 /* periph bus error addr reg */
#define pbesr 0x21 /* periph bus error status reg */
#define xbcfg 0x23 /* external bus configuration reg */
+#define EBC0_CFG 0x23 /* external bus configuration reg */
#define xbcid 0x24 /* external bus core id reg */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
projects / u-boot / commitdiff