#define CFG_DISCOVER_PHY
#endif
-#ifndef CONFIG_COMMANDS
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_ASKENV \
- | CFG_CMD_DHCP \
- | CFG_CMD_ECHO \
- | CFG_CMD_IMMAP \
- | CFG_CMD_JFFS2 \
- | CFG_CMD_MII \
- | CFG_CMD_PCMCIA \
- | CFG_CMD_PING \
- )
-#endif /* !CONFIG_COMMANDS */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#if !defined(FADS_COMMANDS_ALREADY_DEFINED)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_PING
+
+#endif
+
/*
* Miscellaneous configurable options
#define CONFIG_BOOTDELAY 5
-#if 0
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BSP | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_FLASH | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_NET | \
- CFG_CMD_PCI )
-#endif
-
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
/*
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
#define CONFIG_IPADDR 10.0.18.222
#define CONFIG_SERVERIP 10.0.18.190
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_ASKENV )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ASKENV
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
*/
#define CFG_DCACHE_SIZE 2048 /* For PLX IOP480 */
#define CFG_CACHELINE_SIZE 16 /* For AMCC 401/403 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */
#define CFG_SPI_RTC_DEVID 0 /* as 1st SPI device */
-#define __SPI_CMD_OFF 0 /* allow default commands: */
- /* CFG_CMD_SPI */
- /* CFG_CMD_DATE */
-
#else
#undef CONFIG_NIOS_SPI /* NO SPI support */
-#define __SPI_CMD_OFF ( CFG_CMD_SPI \
- | CFG_CMD_DATE \
- )
#endif
/*------------------------------------------------------------------------
#define CONFIG_POST CFG_POST_RTC
#define CFG_NIOS_POST_WORD_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_ASKENV | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_BMP | \
- CFG_CMD_CACHE | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_I2C | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_NAND | \
- CFG_CMD_NFS | \
- CFG_CMD_MMC | \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_SCSI | \
- CFG_CMD_VFD | \
- CFG_CMD_USB | \
- CFG_CMD_XIMG | \
- __SPI_CMD_OFF ) )
-
-
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_XIMG
+
+#if (CFG_NIOS_CPU_SPI_NUMS != 1)
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_DATE
+#endif
+
/*------------------------------------------------------------------------
* KGDB
*----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 9600
#endif
#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
- | CFG_CMD_PCMCIA \
- | CFG_CMD_PING \
- )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_PING
+
+/* This is picked up again in fads.h */
+#define FADS_COMMANDS_ALREADY_DEFINED
#include "fads.h"
#undef CONFIG_BOOTARGS
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
-#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
-#endif
-
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+
+#if defined(CONFIG_CMD_KGDB)
+#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
+#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
+#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
+#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
+#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
+#endif
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_IRQ | \
- CFG_CMD_MVENV | \
- CFG_CMD_PCI | \
- CFG_CMD_PING \
- )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MVENV
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
*/
#define CFG_DCACHE_SIZE 16384
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_ELF | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_BSP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BSP
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_IRQ | \
- CFG_CMD_ELF | \
- CFG_CMD_NAND | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_EEPROM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
#define CFG_8xx_CPUCLK_MAX 133000000
#endif /* CONFIG_MPC852T */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- )
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm fe040000" /* Autoboot command */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BOOTD | \
- CFG_CMD_CACHE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
#define CONFIG_NET_MULTI
#define CONFIG_MII
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Autobooting
*/
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
#define CONFIG_DOS_PARTITION
#define CONFIG_AMIGA_PARTITION
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF | \
- CFG_CMD_NET | \
- CFG_CMD_IDE | \
- CFG_CMD_FDC | \
- CFG_CMD_CACHE | \
- CFG_CMD_CONSOLE| \
- CFG_CMD_USB | \
- CFG_CMD_BSP | \
- CFG_CMD_PCI )
-
-/* CFG_CMD_MII | \ */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FDC
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_CONSOLE|
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_PCI
+
#define CONFIG_PCI 1
/* #define CONFIG_PCI_SCAN_SHOW 1 */
#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
- */
-#include <cmd_confdefs.h>
-
-
/*
* Miscellaneous configurable options
*/
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif