]> git.sur5r.net Git - u-boot/commitdiff
x86: braswell: Fix unexpected crash during Linux kernel boot
authorBin Meng <bmeng.cn@gmail.com>
Thu, 19 Oct 2017 01:20:53 +0000 (18:20 -0700)
committerBin Meng <bmeng.cn@gmail.com>
Fri, 27 Oct 2017 07:13:47 +0000 (15:13 +0800)
It was observed that when booting Linux kernel on Intel Cherry Hill
board, unexpected crash happens quite randomly. Sometimes kernel
just oops, while sometimes kernel throws MCE errors and hangs:

  mce: [Hardware Error]: Machine check events logged
  mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 4: c400000000010151
  mce: [Hardware Error]: TSC 0 ADDR 130f3f2c0
  mce: [Hardware Error]: PROCESSOR 0:406c3 TIME 1508160686 SOCKET 0 APIC 0 microcode 363

This looks like a hardware error per mcelog. After debugging, it
seems turning off turbo mode on the processor does not expose this
behavior, although U-Boot runs OK with turbo mode on. Suspect it is
related to an errata of Braswell processor.

To fix this, remove the Braswell cpu driver which does the turbo
mode configuration, and switch to use the generic cpu-x86 driver.
Also there is a configuration option in the FSP that turns on the
turbo mode and that has been turned off too.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
arch/x86/cpu/braswell/Makefile
arch/x86/cpu/braswell/cpu.c [deleted file]
arch/x86/dts/cherryhill.dts

index ddf6d2804a5352ed26792cb1c0350fb487d4dd1b..4a639b83f5087e5d5e98e6b83596558feaf225b3 100644 (file)
@@ -4,4 +4,4 @@
 # SPDX-License-Identifier:     GPL-2.0+
 #
 
-obj-y += braswell.o cpu.o early_uart.o fsp_configs.o
+obj-y += braswell.o early_uart.o fsp_configs.o
diff --git a/arch/x86/cpu/braswell/cpu.c b/arch/x86/cpu/braswell/cpu.c
deleted file mode 100644 (file)
index 6ff9036..0000000
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- *
- * Derived from arch/x86/cpu/baytrail/cpu.c
- */
-
-#include <common.h>
-#include <cpu.h>
-#include <dm.h>
-#include <asm/cpu.h>
-#include <asm/cpu_x86.h>
-#include <asm/io.h>
-#include <asm/lapic.h>
-#include <asm/msr.h>
-#include <asm/turbo.h>
-
-static const unsigned int braswell_bus_freq_table[] = {
-       83333333,
-       100000000,
-       133333333,
-       116666666,
-       80000000,
-       93333333,
-       90000000,
-       88900000,
-       87500000
-};
-
-static unsigned int braswell_bus_freq(void)
-{
-       msr_t clk_info = msr_read(MSR_BSEL_CR_OVERCLOCK_CONTROL);
-
-       if ((clk_info.lo & 0xf) < (ARRAY_SIZE(braswell_bus_freq_table)))
-               return braswell_bus_freq_table[clk_info.lo & 0xf];
-
-       return 0;
-}
-
-static unsigned long braswell_tsc_freq(void)
-{
-       msr_t platform_info;
-       ulong bclk = braswell_bus_freq();
-
-       if (!bclk)
-               return 0;
-
-       platform_info = msr_read(MSR_PLATFORM_INFO);
-
-       return bclk * ((platform_info.lo >> 8) & 0xff);
-}
-
-static int braswell_get_info(struct udevice *dev, struct cpu_info *info)
-{
-       info->cpu_freq = braswell_tsc_freq();
-       info->features = (1 << CPU_FEAT_L1_CACHE) | (1 << CPU_FEAT_MMU);
-
-       return 0;
-}
-
-static int braswell_get_count(struct udevice *dev)
-{
-       int ecx = 0;
-
-       /*
-        * Use the algorithm described in Intel 64 and IA-32 Architectures
-        * Software Developer's Manual Volume 3 (3A, 3B & 3C): System
-        * Programming Guide, Jan-2015. Section 8.9.2: Hierarchical Mapping
-        * of CPUID Extended Topology Leaf.
-        */
-       while (1) {
-               struct cpuid_result leaf_b;
-
-               leaf_b = cpuid_ext(0xb, ecx);
-
-               /*
-                * Braswell doesn't have hyperthreading so just determine the
-                * number of cores by from level type (ecx[15:8] == * 2)
-                */
-               if ((leaf_b.ecx & 0xff00) == 0x0200)
-                       return leaf_b.ebx & 0xffff;
-
-               ecx++;
-       }
-
-       return 0;
-}
-
-static void braswell_set_max_freq(void)
-{
-       msr_t perf_ctl;
-       msr_t msr;
-
-       /* Enable speed step */
-       msr = msr_read(MSR_IA32_MISC_ENABLES);
-       msr.lo |= (1 << 16);
-       msr_write(MSR_IA32_MISC_ENABLES, msr);
-
-       /* Enable Burst Mode */
-       msr = msr_read(MSR_IA32_MISC_ENABLES);
-       msr.hi = 0;
-       msr_write(MSR_IA32_MISC_ENABLES, msr);
-
-       /*
-        * Set guaranteed ratio [21:16] from IACORE_TURBO_RATIOS to
-        * bits [15:8] of the PERF_CTL
-        */
-       msr = msr_read(MSR_IACORE_TURBO_RATIOS);
-       perf_ctl.lo = (msr.lo & 0x3f0000) >> 8;
-
-       /*
-        * Set guaranteed vid [22:16] from IACORE_TURBO_VIDS to
-        * bits [7:0] of the PERF_CTL
-        */
-       msr = msr_read(MSR_IACORE_TURBO_VIDS);
-       perf_ctl.lo |= (msr.lo & 0x7f0000) >> 16;
-
-       perf_ctl.hi = 0;
-       msr_write(MSR_IA32_PERF_CTL, perf_ctl);
-}
-
-static int braswell_probe(struct udevice *dev)
-{
-       debug("Init Braswell core\n");
-
-       /*
-        * On Braswell the turbo disable bit is actually scoped at the
-        * building-block level, not package. For non-BSP cores that are
-        * within a building block, enable turbo. The cores within the BSP's
-        * building block will just see it already enabled and move on.
-        */
-       if (lapicid())
-               turbo_enable();
-
-       /* Dynamic L2 shrink enable and threshold, clear SINGLE_PCTL bit 11 */
-       msr_clrsetbits_64(MSR_PMG_CST_CONFIG_CONTROL, 0x3f080f, 0xe0008),
-       msr_clrsetbits_64(MSR_POWER_MISC,
-                         ENABLE_ULFM_AUTOCM_MASK | ENABLE_INDP_AUTOCM_MASK, 0);
-
-       /* Disable C1E */
-       msr_clrsetbits_64(MSR_POWER_CTL, 2, 0);
-       msr_setbits_64(MSR_POWER_MISC, 0x44);
-
-       /* Set this core to max frequency ratio */
-       braswell_set_max_freq();
-
-       return 0;
-}
-
-static const struct udevice_id braswell_ids[] = {
-       { .compatible = "intel,braswell-cpu" },
-       { }
-};
-
-static const struct cpu_ops braswell_ops = {
-       .get_desc       = cpu_x86_get_desc,
-       .get_info       = braswell_get_info,
-       .get_count      = braswell_get_count,
-       .get_vendor     = cpu_x86_get_vendor,
-};
-
-U_BOOT_DRIVER(cpu_x86_braswell_drv) = {
-       .name           = "cpu_x86_braswell",
-       .id             = UCLASS_CPU,
-       .of_match       = braswell_ids,
-       .bind           = cpu_x86_bind,
-       .probe          = braswell_probe,
-       .ops            = &braswell_ops,
-};
index 1ccb6059911bebedf5e3122625b5c8898916088e..840a6699568f9459900d7d7d6de0763d47e34727 100644 (file)
 
                cpu@0 {
                        device_type = "cpu";
-                       compatible = "intel,braswell-cpu";
+                       compatible = "cpu-x86";
                        reg = <0>;
                        intel,apic-id = <0>;
                };
 
                cpu@1 {
                        device_type = "cpu";
-                       compatible = "intel,braswell-cpu";
+                       compatible = "cpu-x86";
                        reg = <1>;
                        intel,apic-id = <2>;
                };
 
                cpu@2 {
                        device_type = "cpu";
-                       compatible = "intel,braswell-cpu";
+                       compatible = "cpu-x86";
                        reg = <2>;
                        intel,apic-id = <4>;
                };
 
                cpu@3 {
                        device_type = "cpu";
-                       compatible = "intel,braswell-cpu";
+                       compatible = "cpu-x86";
                        reg = <3>;
                        intel,apic-id = <6>;
                };
                        fsp,pmic-i2c-bus = <0>;
                        fsp,enable-isp;
                        fsp,isp-pci-dev-config = <ISP_PCI_DEV_CONFIG_2>;
-                       fsp,turbo-mode;
                        fsp,pnp-settings = <PNP_SETTING_POWER_AND_PERF>;
                        fsp,sd-detect-chk;
                };