ARM: mx31: Print the silicon version

Use the same method of the Linux kernel to print the MX31 silicon version on
boot.

Tested on a MX31PDK with a 2.0 silicon, where it shows:

CPU:   Freescale i.MX31 rev 2.0 at 531 MHz

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
index fa07fec60d8744e5e3770281419af8a5fa5a5c89..9b7a7a24c15b8a4cd8ddd0225a525be67e32ae21 100644 (file)
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -106,11 +106,37 @@ void mx31_set_pad(enum iomux_pins pin, u32 config)
 
 }
 
+struct mx3_cpu_type mx31_cpu_type[] = {
+       { .srev = 0x00, .v = "1.0"  },
+       { .srev = 0x10, .v = "1.1"  },
+       { .srev = 0x11, .v = "1.1"  },
+       { .srev = 0x12, .v = "1.15" },
+       { .srev = 0x13, .v = "1.15" },
+       { .srev = 0x14, .v = "1.2"  },
+       { .srev = 0x15, .v = "1.2"  },
+       { .srev = 0x28, .v = "2.0"  },
+       { .srev = 0x29, .v = "2.0"  },
+};
+
+char *get_cpu_rev(void)
+{
+       u32 i, srev;
+
+       /* read SREV register from IIM module */
+       struct iim_regs *iim = (struct iim_regs *)MX31_IIM_BASE_ADDR;
+       srev = readl(&iim->iim_srev);
+
+       for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+               if (srev == mx31_cpu_type[i].srev)
+                       return mx31_cpu_type[i].v;
+               return "unknown";
+}
+
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo (void)
 {
-       printf("CPU:   Freescale i.MX31 at %d MHz\n",
-               mx31_get_mcu_main_clk() / 1000000);
+       printf("CPU:   Freescale i.MX31 rev %s at %d MHz\n",
+                       get_cpu_rev(), mx31_get_mcu_main_clk() / 1000000);
        return 0;
 }
 #endif

diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 37337f2877a32446491e422ceaa71e9d651a3c7e..0eeaf39ab2cd544bc687cd8e064293653a843b73 100644 (file)
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -84,6 +84,29 @@ struct wdog_regs {
        u16 wrsr;       /* Reset Status */
 };
 
+/* IIM Control Registers */
+struct iim_regs {
+       u32 iim_stat;
+       u32 iim_statm;
+       u32 iim_err;
+       u32 iim_emask;
+       u32 iim_fctl;
+       u32 iim_ua;
+       u32 iim_la;
+       u32 iim_sdat;
+       u32 iim_prev;
+       u32 iim_srev;
+       u32 iim_prog_p;
+       u32 iim_scs0;
+       u32 iim_scs1;
+       u32 iim_scs2;
+       u32 iim_scs3;
+};
+
+struct mx3_cpu_type {
+       u8 srev;
+       const char *v;
+};
 
 #define IOMUX_PADNUM_MASK      0x1ff
 #define IOMUX_PIN(gpionum, padnum) ((padnum) & IOMUX_PADNUM_MASK)
@@ -480,6 +503,8 @@ enum iomux_pins {
 #define CCMR_FPM       (1 << 1)
 #define CCMR_CKIH      (2 << 1)
 
+#define MX31_IIM_BASE_ADDR     0x5001C000
+
 #define PDR0_CSI_PODF(x)       (((x) & 0x1ff) << 23)
 #define PDR0_PER_PODF(x)       (((x) & 0x1f) << 16)
 #define PDR0_HSP_PODF(x)       (((x) & 0x7) << 11)