LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
+COBJS := $(BOARD).o law.o
SOBJS := init.o
#include <config.h>
#include <mpc85xx.h>
-#define LAWAR_TRGT_PCI1 0x00000000
-#define LAWAR_TRGT_PCI2 0x00100000
-#define LAWAR_TRGT_PCIE 0x00200000
-#define LAWAR_TRGT_DDR 0x00f00000
-
/*
* TLB0 and TLB1 Entries
*
2:
entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xa000_0000 0xbfff_ffff PCIe MEM 512M
- * 0xc000_0000 0xdfff_ffff PCI2 MEM 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe10f_ffff PCI1 IO 1M
- * 0xe280_0000 0xe20f_ffff PCI2 IO 1M
- * 0xe300_0000 0xe30f_ffff PCIe IO 1M
- * 0xf800_0000 0xffff_ffff FLASH (boot bank) 128M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- *
- * LAW 0 is reserved for boot mapping
- */
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
-
- .long (4f-3f)/8
-3:
- .long 0
- .long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_1G)) & ~LAWAR_EN
-
- .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
-
- .long (CFG_PCI2_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCI2_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
-
- .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
- .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_1M)
-
- /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
- .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff
- .long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
-
-4:
- entry_end
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCIe MEM 512M
+ * 0xc000_0000 0xdfff_ffff PCI2 MEM 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe10f_ffff PCI1 IO 1M
+ * 0xe280_0000 0xe20f_ffff PCI2 IO 1M
+ * 0xe300_0000 0xe30f_ffff PCIe IO 1M
+ * 0xf800_0000 0xffff_ffff FLASH (boot bank) 128M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * LAW 0 is reserved for boot mapping
+ */
+
+struct law_entry law_table[] = {
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+ SET_LAW_ENTRY(3, CFG_PCI1_IO_PHYS, LAWAR_SIZE_1M, LAW_TRGT_IF_PCI_1),
+ SET_LAW_ENTRY(4, CFG_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+ SET_LAW_ENTRY(5, CFG_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2),
+ SET_LAW_ENTRY(6, CFG_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW_ENTRY(7, CFG_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
+ /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+ SET_LAW_ENTRY(8, CFG_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o bcsr.o
+COBJS := $(BOARD).o bcsr.o law.o
SOBJS := init.o
2:
entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- *0) 0x0000_0000 0x7fff_ffff DDR 2G
- *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB
- *2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB
- *-) 0xe000_0000 0xe00f_ffff CCSR 1M
- *3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M
- *4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M
- *5) 0xc000_0000 0xdfff_ffff SRIO 512MB
- *6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB
- *6.b) 0xf800_0000 0xf800_7fff BCSR 32KB
- *6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB
- *6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB
- *6.e) 0xfe00_0000 0xffff_ffff Flash 32MB
- *
- *Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
- */
-
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCIE1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
-
-#define LAWBAR4 ((CFG_PCIE1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
-
-#define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-/* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */
-#define LAWBAR6 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
- .section .bootpg, "ax"
- .globl law_entry
-
-law_entry:
- entry_start
- .long (4f-3f)/8
-3:
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5,LAWBAR6,LAWAR6
-4:
- entry_end
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ *0) 0x0000_0000 0x7fff_ffff DDR 2G
+ *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB
+ *2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB
+ *-) 0xe000_0000 0xe00f_ffff CCSR 1M
+ *3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M
+ *4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M
+ *5) 0xc000_0000 0xdfff_ffff SRIO 512MB
+ *6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB
+ *6.b) 0xf800_0000 0xf800_7fff BCSR 32KB
+ *6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB
+ *6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB
+ *6.e) 0xfe00_0000 0xffff_ffff Flash 32MB
+ *
+ *Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ */
+
+struct law_entry law_table[] = {
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(3, CFG_PCIE1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+ SET_LAW_ENTRY(6, CFG_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+ /* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */
+ SET_LAW_ENTRY(7, CFG_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o flash.o
-#COBJS := $(BOARD).o flash.o $(BOARD)_slave.o
+COBJS := $(BOARD).o flash.o law.o
SOBJS := init.o
-#SOBJS :=
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
.long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#endif
entry_end
-
-/* LAW(Local Access Window) configuration:
- * 0000_0000-0800_0000: DDR(128M) -or- larger
- * f000_0000-f3ff_ffff: PCI(256M)
- * f400_0000-f7ff_ffff: RapidIO(128M)
- * f800_0000-ffff_ffff: localbus(128M)
- * f800_0000-fbff_ffff: LBC SDRAM(64M)
- * fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
- * fdf0_0000-fdff_ffff: CCSRBAR(1M)
- * fe00_0000-ffff_ffff: Flash(32M)
- * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
- * Window.
- * Note: If flash is 8M at default position(last 8M),no LAW needed.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR0 0
-#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
-#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-#if !defined(CONFIG_RAM_AS_FLASH)
-#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
-#else
-#define LAWBAR2 0
-#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-#endif
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 0x03
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
- entry_end
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/* LAW(Local Access Window) configuration:
+ * 0000_0000-0800_0000: DDR(128M) -or- larger
+ * f000_0000-f3ff_ffff: PCI(256M)
+ * f400_0000-f7ff_ffff: RapidIO(128M)
+ * f800_0000-ffff_ffff: localbus(128M)
+ * f800_0000-fbff_ffff: LBC SDRAM(64M)
+ * fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
+ * fdf0_0000-fdff_ffff: CCSRBAR(1M)
+ * fe00_0000-ffff_ffff: Flash(32M)
+ * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
+ * Window.
+ * Note: If flash is 8M at default position(last 8M),no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SPD_EEPROM
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
+#endif
+ SET_LAW_ENTRY(2, CFG_PCI_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
+#ifndef CONFIG_RAM_AS_FLASH
+ SET_LAW_ENTRY(3, CFG_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o sdram.o
+COBJS := $(BOARD).o sdram.o law.o
SOBJS := init.o
-#SOBJS :=
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
.long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE+0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xf800_0000 0xf80f_ffff BCSR 1M
- * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_LBC_FLASH_BASE>>12) & 0xfffff)
-#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
-#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
-
-/*
- * Rapid IO at 0xc000_0000 for 512 M
- */
-#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-
- .section .bootpg, "ax"
- .globl law_entry
-law_entry:
- entry_start
- .long 0x05
- .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
- .long LAWBAR4,LAWAR4
- entry_end
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xc000_0000 0xdfff_ffff RapidIO 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xf800_0000 0xf80f_ffff BCSR 1M
+ * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+ SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
+ SET_LAW_ENTRY(2, CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+ SET_LAW_ENTRY(4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI),
+ SET_LAW_ENTRY(5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+
#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
#define CONFIG_SYS_CLK_FREQ 33000000
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_DDR_DLL /* possible DLL fix needed */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+
/* Using Localbus SDRAM to emulate flash before we can program the flash,
* normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
* Not availabe for EVAL board
/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/ /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
/*
* When initializing flash, if we cannot find the manufacturer ID,
#define CONFIG_CPM2 1 /* has CPM2 */
#endif
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+
/*
* sysclk for MPC85xx
*
projects / u-boot / commitdiff