km/common: moved eeprom config to pbec specific part

Moved eeprom config to specific part, to allow bigger eeprom write pages
for km_kirkwood designs. Write page only used for env eeprom in std use
cases. 24C128 has page size of 64bytes -> 8 time faster.

Signed-off-by: Stefan Bigler <stefan.bigler@keymile.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>

diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index d749b2bceaa1bcf54251f0184a275d4c4485d154..bc1edafcb6d2ccf182ae280641709196335e44b7 100644 (file)
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -88,12 +88,6 @@
 #define CONFIG_SYS_I2C_INIT_BOARD
 #define CONFIG_I2C_MUX
 
-/* EEprom support */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
-
 /* Support the IVM EEprom */
 #define        CONFIG_SYS_IVM_EEPROM_ADR       0x50
 #define CONFIG_SYS_IVM_EEPROM_MAX_LEN  0x400

diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index 7610358d8ea468f20fa56e9b6a0ca3b6cbaa1416..506755ba0ec7b7dfacf0ffea09d97e07d65f3b9b 100644 (file)
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -29,6 +29,12 @@
 #define CONFIG_CMD_DTT
 #define CONFIG_JFFS2_CMDLINE
 
+/* EEprom support 24C08, 24C16, 24C64 */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3  /* 8 Byte write page */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
+
 #define CONFIG_ENV_SIZE                0x04000         /* Size of Environment */
 #define CONFIG_FLASH_CFI_MTD
 

diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index d41fcb760eff32a0eecfe4be48fb38b9de4c1da3..2e3b1826242398bdd9adc895b4812b3d6b4053a3 100644 (file)
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -195,6 +195,12 @@ int get_scl(void);
 
 #endif
 
+/* EEprom support 24C128, 24C256 valid for environment eeprom */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      6 /* 64 Byte write page */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
+
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2